Project: BAJO Grande AQUATECH INTERNATIONAL CORPORATION
Client: Solidaris, LLC. AQUATECH PROJECT #P-00149
1.1 Introduction
Introduction
Congratulations on purchasing one of the best-engineered and manufactured water treatment systems available.
Aquatech International Corporation (Aquatech) is incorporated in the Commonwealth of Pennsylvania, with
headquarters located in Canonsburg, approximately 25 miles south of Pittsburgh. We specialize in the design,
engineering, manufacture and installation of custom engineered water and wastewater treatment systems for
power generation, chemical, pulp and paper, steel, semi-conductor & electronic, fertilizer, petroleum and
petrochemical industries.
Aquatech provides complete technical services on each project from the conceptual stage by assisting the customer
with the preparation of specifications, through engineering and manufacture, to the installation and startup of water and
wastewater treatment plants. Our engineers and project management personnel have many years of experience in
the water and waste water treatment industries and have developed expertise in process, equipment and control
design, and construction of custom engineered systems for a wide range of applications.
Our modern manufacturing facilities include in excess of 70,000 square feet of floor space for fabrication and assembly of
systems. The administrative and engineering personnel reside in a 25,000 square foot office complex that allows
excellent inter-departmental interface and proximity to the factory to ensure a high degree of quality control for
compliance to customer specification.
Some of the systems Aquatech supplies include the following equipment:
a. Pretreatment and Chemical Feed Systems
b. Coagulation, Precipitation Systems including Clarifiers and Lime/Soda Softeners
c. Filtration Systems including Gravity Filters, Vertical and Horizontal Pressure Filters with Sand, Activated Carbon
and Mixed Media
d. Carbon Filters and Carbon Adsorption Columns
e. Zeolite Water Softeners, Chloride Dealkalizers, Split Stream Dealkalizers
f. Ion Exchange Demineralizers - Co-Current, Counter-Current, Co-Counter-Current Systems
g. Condensate Polishers
h. Degasifiers, Deaerators, and Aerators
i. Membrane Systems including Reverse Osmosis, Microfiltration, Ultrafiltration and Nanofiltration
j. Vacuum Degasification Systems
k. Waste Neutralization Systems
Page 1 of 2
Project: BAJO Grande AQUATECH INTERNATIONAL CORPORATION
Client: Solidaris, LLC. AQUATECH PROJECT #P-00149
1.1 Introduction
l. Electro-Dialysis Systems
m. ZLD systems including Brine concentrators, Crystallizers, Belt-Filter Presses or drum dryers
n. Thermal Desalination systems including MED’s(multiple effect distillation) and MSF(Multiple stage Flash)
Units
o. Control Systems to Monitor, Control and Record from one Central Control Panel (Cubicle or Console Type) for
Local or Remote Operation, including Graphic/Mimic Displays
Special features of our automatic control systems include the latest in programmable controllers and operator interface
systems which permit selective sequencing with variance in steps without rewiring of the control system.
This operation and maintenance manual should be kept near the workplace and plant engineering office. Periodically, it
needs to be updated to reflect modifications, additions, and deletions or other changes affecting the original design
concept. Prior to design changes, Aquatech strongly recommends the owner contact our Customer/Field Support
representative for review and comments or issues of spare parts, field service and documentation, please direct your
inquiry to:
Aquatech International Corporation
Manager, Customer and Field Support
1 Four Coins Drive
Canonsburg, Pa 15317 USA
Phone: 724 746-5300
Fax: 724 746-5374
E-mail:
[email protected] Web-Site www.aquatech.com
WARRANTY DISCLAIMER
The system should be operated and maintained per the operating instructions provided by seller. The Purchaser is to
maintain documents such as operation records, log sheets, etc., and also records of periodic maintenance program
undertaken by Purchaser. Failure or refusal to fully disclose to Seller, the use and operating parameters, shall render
all warranties null and void. Seller strictly takes no liability for any damages caused for non compliance of these
provisions by the Purchaser.
Page 2 of 2
