Currency counter
Multi Value 3200
ENGLISH
User Manual
CONTENTS
Safety precautions 4
Purpose of the currency counter 5
Declaration of Conformity 5
Specifications 6
Design of the counter 7
Exterior 7
Control panel 8
Control keys 8
Keys and numbers correspondence diagram 10
Operational procedure 10
Types of detection provided by Multi Value 3200 12
Troubleshooting 12
Warranty 15
Transportation and storage 15
Complete Set 15
The present user manual contains a section with warranty certificate and warranty
terms and conditions. Please keep the present manual at least until the end of the
warranty period of the device.
Multi Value 3200 3 www.aus.at
Safety precautions
Please read the safety precautions below before operating the
Currency Counter. They must be obverse to avoid any potential
hazards that could result in personal injuries or damage to the
Currency Counter.
1. To avoid the risks of damaging the device or causing injury to
users, install the counter on a flat steady surface.
2. Always switch the counter off and unplug the power cable after you
have finished working with it
3. To clean the sensors (feeding sensor, stacker sensor and counting
sensors) use a soft cloth or a brush.
4. If any failures or crashes occur, contact the technical support
service.
5. To avoid display malfunctions, turn the counter on after 5 seconds
from the moment of its last shutdown.
Multi Value 3200 4 www.aus.at
Thank you for choosing A.u.S. Spielgeräte equipment.
A.u.S. Spielgeräte offer s a wide r ange of equipment for tr ade,
ser vice and finance enterprises, including reliable and easy to use
banknote and coin counters, multifunctional and automated
currency detectors, vacuum and non-vacuum banknote packagers
and more. Detailed information on the whole range of
A.u.S. Spielgeräte equipment is available at www.aus.at.
2. Purpose of the currency counter
Multi Value 3200 - are designed for counting large amounts of
banknotes of various currencies.
These counters are reliable and easy to use and have the ability to
detect the genuineness of different notes.
3. Declaration of conformity
The currency counter conforms to the following requirements:
CU TR 004/2011 «On safety of low-voltage equipment»;
CU TR 020/2011 «Electromagnetic compatibility of technical
equipment».
This manual contains information that is actual for the moment of
publishing, and might not contain later changes.
The manufacturer maintains the right to change machine’s
specifications and control algorithms.
Multi Value 3200 5 www.aus.at
Specifications
Model Multi Value 3200
Dimensions (WхDхH) 28х26х27 cm/11х10.2х10.6"
Net weight 6,5 kg
Gross weight 7,5 kg
Counting speed 900/1200/1500 banknotes/min
Size of countable banknotes from 110х60 mm to 185х90 mm
Thickness of countable
0.08~0.12 mm
banknotes
Feed system Roller friction
Hopper capacity 500 banknotes
Stacker capacity 200 banknotes
100~240V ±10% AC current, 50/60 Hz,
Power supply 1.8А
Power consumption less than 50 W
Working temperature 0~35°C
Storage temperature -10~60°C
Ambient humidity 20%~90% (with no condensation)
Available interfaces USB, RS232, LAN
Multi Value 3200 6 www.aus.at
Design of the counter
Exterior
Multi Value 3200 7 www.aus.at
1 Stacker stopping plate
2 Stacker sensor
3 Impeller
4 LCD Display
5 Hopper sensor
6 Banknote guide
7 Handle
8 Power connector
9 Power switch
10 RS-232 interface
11 LAN interface
12 USB interface
13 Adjustment screw
Control panel
Control keys
Press to move the cursor to the left or select batch
number.
Press to move the cursor to the right, select batch
number or enter the settings menu.
Multi Value 3200 8 www.aus.at
Press to turn on/off the batch function.
Press to choose available currency types. Press the
key corresponding to the necessary currency
number (ref. to the diagram on p. 10).
Press to turn on/off the ADD function (addition to
the count results) or display the count results.
Press to select counting mode. CNT (simple count),
SDC (single denomination count) и MDC (mixed
denomination count).
Press to select counting speed.
Press to confirm the input data. If a printe is
connected to the counter, press this button to print
the count results.
Press to move the cursor up or increase batch
number.
Press to move the cursor down or decrease batch
number.
Press to delete the input data or return to the
previous menu.
Press to start the count or return to the previous
menu.
Multi Value 3200 9 www.aus.at
Keys and numbers correspondence diagram
Operational procedure
Place the banknotes in the hopper to start the count.
Working modes
CNT mode (simple count)
Press the MODE button to select the CNT mode (simple count). In
this mode you can turn on the ADD and BATCH functions (addition
to the count results and batching).
SDC mode (single denomination count)
Press the MODE button to select the SDC mode. This mode is
designed for the count of banknotes of one denomination. The counter
takes the first banknote as a reference and stops the count when a
banknote of a different denomination is received.
MDC mode (mixed denomination count)
Press the MODE button to select the MDC mode. This mode is
designed for the count of banknotes of multiple denominations. Press
the DISP button to see the count results.
Multi Value 3200 10 www.aus.at
Settings menu
Press the button once , to see the following interface:
MENU
1. ServiceMenu
2. Version Information
3. Current Time Setting
4. Saving Date On U Disk
Select a submenu using the buttons ,press to confirm
or to exit.
1. Service Menu is designed for service maintenance and is not
available for users.
2. Choosing "Version Information", will display the installed
software version.
3. «Current Time Setting» submenu is designed to set date and
time. Use the buttons to choose the parameters and the
buttons to change them.
Multi Value 3200 11 www.aus.at
4. «Save date of U disk» menu allows saving data on the U disk. To
do that, connect the U disk via USB cable and turn on the
counter. Start the count. Count data will automatically save on the
U disk as a file «ERR». If the counter doesn’t detect counterfeit
banknotes during this procedure, save the data in the SDC mode.
Type of detection provided by DoCash 3200-
Value currency counter
The counter implements various types of detection:
ultraviolet radiation (UV),
magnetic detection (МG),
magnetic thread detection (MT),
reflected IR mapping,
penetrating IR mapping,
optical image detection (via high-definition CIS sensor),
RGB image detection (spectral analysis of paint),
3D-detection (geometrical dimensions),
image density detection (doubling),
integrity detection.
Troubleshooting
After launch, the counter will start an error check automatically. If the
starting screen shows on the error code, it is most likely because the
sensor is covered with dust or blocked by banknotes. Please, clean the
sensor with a brush or a soft cloth and remove the banknotes. Restart
the device.
Multi Value 3200 12 www.aus.at
Error code Error cause
E1 UV sensor error
E2 Doubled banknotes
E3 Chained banknotes
E4 Half of a banknote
E10 CIS-sensor signal loss
E11 Denomination error
E12 Banknote denomination error
E13 Front side recognition error
E14 Size detection error
E15 Reverse side recognition error
E20 MT Error
E21 MG1 Error
E22 MG2 Error
E23 MG3 Error
E24 MG4 Error
E30 IR penetration error 1
E31 IR penetration error 2
E32 IR penetration error 3
E33 IR penetration error 4
E34 IR penetration error 5
E35 IR penetration error 6
E36 IR penetration error 7
E37 IR penetration error 8
E38 IR reflection error 1
Multi Value 3200 13 www.aus.at
E39 IR reflection error 2
E40 IR reflection error 3
E41 IR reflection error 4
E42 IR reflection error 5
E43 IR reflection error 6
E44 IR reflection error 7
E45 IR reflection error 8
Multi Value 3200 14 www.aus.at
Warranty
The warranty period is 12 months from the day of delivery subject to
compliance with the conditions of use and storage indicated in this
Manual and additional conditions specified in the Warranty Coupon.
Manufacturer shall be released from any obligation for the counter
malfunction resulting from improper transportation, storage and use,
as well as from mechanical failure.
Transportation and storage
Allowed temperature during transportation is from – 30 to + 50 °С.
Storage of the counter is allowed only in heated places at the
temperature from +1 to + 40 °С and relative air humidity of up to 80%
(at 25 °С).
Storage time of the detector – 2 years
Complete Set
Multi Value 3200 comes standar d with:
Currency counter 1 pce
Power supply cable 1 pce
User manual 1 pce
Customer display (optional) 1 pcs
This manual contains information that is actual for the moment of publishing, and
might not contain later changes.
The manufacturer maintains the right to change machine’s specifications and
control algorithms.
DoCash –3200 Value 15 www.aus.at
