STEEL BEAM-COLUMN DESIGN AISC 360-16 ASD/LRFD
PROJECT : DATE : 12/1/2025
LOCATION : ENGINEER :
PROJECT NO. : CHECK :
Section property
STEEL GRADE STK 400 Section form List PIPE 114.3x5.6
Steel yield stress Fy 235.00 MPa.
Steel tensile stress Fu 400.00 MPa. D 114.30 mm. I 2830000.00 mm4
Modulus of elasticity E 200000 MPa. t 5.60 mm. S 49518.81 mm3
Unbraced length about x axis Lx 2.6 m W 15.00 kg./m. Z 62888.89 mm3
Unbraced length about y axis Ly,Lb 2.6 m Ag 1912.00 mm2 C 103936.24 mm3
Effective length factor about x axis Kx 1 r 38.50 mm. J 5663927.35 mm4
Effective length factor about y axis Ky 1
Design of members for Tensile strength (Section D2)
Tensile strength Section D2
Nominal tensile strength Pn = Min( Fy*Ag , Fu*Ae ) Pn 449.32 kN.
Design tensile strength ASD Pa = Pn / Ωt Ωt= 1.67 Pa 269.05 kN.
Design tensile strength LRFD Pu = Φt Pn Φt= 0.9 Pu 404.39 kN.
Classification of sections for local buckling for Compression Elements
Width-to-Thickness Ratio λ = D/t λ 20.41
Limiting Width-to-Thickness Ratio λr = E/Fy λr 93.62 Nonslender
Design of members for Compression (Section E)
Φc 0.9 LRFD Ωc 1.67 ASD
effective length of member for buckling about x-axis Lcx = Kx Lx Lcx 2.60 m.
effective length of member for buckling about y-axis Lcy = Ky Ly Lcy 2.60 m.
Lcx/rx 67.53
Lcy/ry 67.53
Section E3 Flexual Buckling Consider about X axial
Flexural elastic buckling stress Fex = π^2 E / (Lcx/rx)^2 Fex 432.82 MPa.
Check elastic buckling Lcx / rx > 4.71(E/Fy)^0.5 67.53 ≤ 137.40
Check elastic buckling Fy/Fex >2.25 0.54 ≤ 2.25 inelastic
Critical stress Fcr = (0.658)^(Fy/Fe) Fy 187.23 MPa.
Section E7 Not consider
Effective Areas of The Cross Section λ<=λr ; Ae=Ag , λ>λr ; Ae=[(0.038E/Fy(D/t))+(2/3)]Ag Not consider mm2
Nominal compressive strength Pn = Fcr Ag 357.98 kN.
Design compressive strength ASD Pa = Pn / Ωc 214.36 kN.
Design compressive strength LRFD Pu = Φc Pn 322.18 kN.
Classification of sections for local buckling
Width to thickness ratio λ = D/t λ 20.41
Limiting ratio for compact section λp = 0.07 (E/F) λp 59.57 λp > λ
Limiting ratio for non-compact section λr = 0.31 (E/F) λr 263.83 Compact
Design of members for flexure (Section F8)
Φc 0.9 LRFD Ωc 1.67 ASD
Yielding Mn = Mp = Fy Z 14.779 kN-m.
Critical stress Fcr = 0.33E / (D/t) Not consider ksc.
Local Bucking Not consider Not consider ton-m.
Nominal flexural strength Mn 14.78 kN-m.
Design flexural strength ASD Mc = Mn / Ωb 8.85 kN-m.
Design flexural strength LRFD Mc = Mn Φb 13.30 kN-m.
STEEL BEAM-COLUMN DESIGN AISC 360-16 ASD/LRFD
PROJECT : DATE : 12/1/2025
LOCATION : ENGINEER :
PROJECT NO. : CHECK :
Design of members for shear (Section G5)
Φv 0.90 LRFD Ωv 1.67 ASD
Distance from maximum to zero shear force (default assume 0.5 Lmax) 1300 mm.
Fcr Fcr = max( [1.60E/(Lv/D)0.5 (D/t)(3/2)] , [0.78E/((D/t)(3/2))] ) <= 0.6Fy 141.00 MPa.
Nominal shear strength Vn = Fcr Ag / 2 134.80 kN.
Design shear strength ASD Vc = Vn / Ωv 80.72 kN.
Design shear strength LRFD Vc = Vn Φv 121.32 kN.
Design of members for Torsion (Section H3.1)
ΦT 0.90 LRFD ΩT 1.67 ASD
Critical stress Fcr = max[(1.23E) / ((L/D)0.5)((D/t)(5/4)) , (0.60E) / ((D/t)(3/2))] <0.6Fy Fcr 141.00 MPa.
Nominal torsion strength Tn = Fcr C Tn 14.66 kN-m.
Design torsion strength ASD Tc = Tn / ΩT 8.78 kN-m.
Design torsion strength LRFD Tc = Tn ΦT 13.19 kN-m.
CHECK INTERACTION STRENGTH
LRFD Load and Resistance Factor Design
Internal force Design force
Axial load + comp., - tension 74 kN. Axial load 322.18 kN.
Moment 10 kN-m. Moment 13.30 kN-m.
Shear 10 kN. Shear 121.32 kN.
Torsion 0 kN-m. Torsion 13.19 kN-m.
Axial Demand-capacity ratio Demand / Capacity 0.23 …OK…
Moment Demand-capacity ratio Demand / Capacity 0.75 …OK…
Shear Demand-capacity ratio Demand / Capacity 0.08 …OK…
Torision Demand-capacity ratio Demand / Capacity 0.00 …OK…
Combine Flexure and Axial Force Section H 1.1 Pr/Pc + 8/9*(Mr/Mc) ≤ 1.0 0.90 …OK…
