Wireless

Systems
 Wireless Systems

WIRELESS INTRODUCTION
WIRELESS ATW-C 4
WIRELESS MANAGER - FREQUENCY 6
WIRELESS SERIES OVERVIEW 7

WIRELESS SYSTEMS
5000 Series 8
3000 Series 10
2000 Series 14
AT-One 16
System 10 / System 10 PRO 18
Antennas 22
Accessories 24
cH/cW Mic Summary 25-27

WIRELESS APPLICATIONS
Application 1 - Dual-channel wireless system 28
Application 2 - Single-channel wireless system covering two zones 29
Application 3 - Multiple zones wireless system 30
Application 4 - Four-channel wireless system 32
Application 5 - Multi-channel wireless system for install 34
Application 6 - 16-channel wireless system using ATW-DA49a 36
Application 7 - 16-channel wireless system using daisy chain 38
Application 8 - 64-channel wireless system / 256-channel wireless system 40
Radio Equipment Directive (RED) - Restrictions 42-43

audio-technica wireless systems guide - 3

WIRELESS SYSTEMS / ATW-C

/ Interchangeable
Microphone
Capsules (IMC)

/ Cardioid / Cardioid / Hypercardioid / Cardioid / Cardioid / Cardioid

Condenser Condenser Dynamic Dynamic Condenser Dynamic
ATW-C5400 ATW-C3300 ATW-C6100 ATW-C4100 ATW-C710 ATW-C510

Interchangeable Microphone Capsules

compatible with last generation 3000 and
5000 Series wireless handheld transmitters
All interchangeable microphone capsules can be used with ATW-T5202
and ATW-T3202 handheld transmitters. Its industry-standard thread
allows use with other compatible handheld transmitters.
/ Handheld / Handheld
Transmitter Body Transmitter Body
ATW-T5202 ATW-T3202

Condenser microphones capsules ATW-C5400 and ATW-C3300

an heritage from the world acclaimed Studio microphones AT4050 and AT4033.

Same sound
Same element as the
characteristics as the
classic AT4033a studio
renowned AT4050
microphone offering
studio microphone
extreme clarity
offering extreme clarity
and realism.
and realism.

/ Interchangeable Cardioid / Interchangeable Cardioid

Condenser Microphone Capsule Condenser Microphone Capsule
ATW-C5400 ATW-C3300

Clean, Crisp and Accurate Warm and Flattering Sound

Transparent uppers/mids and rich low-end qualities are The AT4033a produces a warm and flattering sound that
combined with advanced acoustic engineering brings the versatility of a dynamic microphone,
for extensive performance abilities and a clean, crisp as well as the transparency and detail of a high-end
and accurate sound reproduction, even at high SPLs. capacitor model for a vintage effect.

4 - audio-technica wireless systems guide

ATW-C / WIRELESS SYSTEMS

audio-technica wireless systems guide - 5

WIRELESS SYSTEMS / WIRELESS MANAGER

Everything under control

The Wireless Manager software supports the setup, control, and monitoring of compatible Audio-Technica wireless
devices. The software allows you to determine device settings, make and coordinate frequency plans while offline,
and configure import settings whilst connected to wireless systems via network connection. When linked to a
compatible receiver, you can scan the RF environment, monitor connected devices, and view the system log.

WIRELESS SYSTEMS / FREQUENCY

Audio-Technica - Frequency bands versus wireless series

2400
470
478
486
494
502
510
518
526
534
542
550
558
566
574
582
590
598
606
614
622
630
638
646
654
662
670
678
686
694
702
710
718
726
734
742
750
758
766
774
782
790

791

821

823

832

862
863
Frequency
from > to

2483
478
486
494
502
510
518
526
534
542
550
558
566
574
582
590
598
606
614
622
630
638
646
654
662
670
678
686
694
702
710
718
726
734
742
750
758
766
774
782
790
791

821

823

832

862

863
865
Duplex
TV Channel 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 X LTE X gap LTE X 70 ISM

5000-Series DG1 GH1

Receiver 470.125 to 699.875 MHz 700.125 to 819.875 MHz

DE1 GH1
470.125 to 590.000 MHz 700.125 to 819.875 MHz
5000-Series
Transmitter
EG1
580.000 to 699.875 MHz

GH2
DE2 EE1 EF1 FG1 794.100 - 805.900 MHz HH2
3000-Series 821.100 - 831.900 MHz
470.125 - 529.975 MHz 530.000 - 589.975 MHz 590.000 - 649.975 MHz 650.000 - 699.875 MHz
863.100 - 864.900 MHz

3000-Series DE2 EE1 EF1 FG1

Network receiver 470.125 - 529.975 MHz 530.000 - 589.975 MHz 590.000 - 649.975 MHz 650.000 - 699.875 MHz

I-band F-band
U-band D-band
487.125 854.900
2000-Series 606.500 -
656.125
- 506.500 - 864.900
- 631.000 MHz - 678.500 MHz
MHz MHz

DE3 HH2
AT-One 482.625 824.400 - 830.850 MHz
- 511.375 MHz 863.300 - 864.700 MHz

System 10 2.4
System 10 Pro GHz

Note that some frequency bands might not be available in country or region in which you live, or could come with a limited tuning bandwidth/transmitting power due to local regulations.

6 - audio-technica wireless systems guide

 SERIES OVERVIEW / WIRELESS SYSTEMS

/ Frequency-Agile / Frequency-Agile
True Diversity UHF True Diversity UHF

5000 Series 3000 Series

Designed for use on professional tours, in stadiums, concert halls and 3000 Series systems have an operating range of 100m
festivals with incredible audio quality and proven, critically acclaimed and are available in several frequency bands that provide
performance for artists, broadcasters and presenters. a wide tuning range.

/ Antenna Switching Diversity

/ Frequency-Agile UHF Wireless Systems
True Diversity UHF
AT-One
2000 Series
Easy to use, for small channel counts, medium operating range,
Easy to use, flexible to setup, medium - large channel counts, rock solid RF. case and rackmount, fairly easy setup.

/ Rack-Mount / Rack-Mount
Digital Wireless Systems Digital Wireless Systems

System 10 Pro System 10

Easy to use, easy to setup remote receiver unit allows professional fixed Easy to use, easy to setup, license-free, no frequency coordination
installations, license-free, no frequency coordination needed. needed. Short range allows usage of another System 10 setup in an
adjacent room.

Performance Live Sound Install Broadcast & Production

Corporate /
Rec. School / Large Film &
Operating Indoor Outdoor Analog / Hobby Prof. Rental hotel Broadcast
Channel Theater house of venues ENG Live sport Location
range range range Digital music music company conference studio
Count worship / / Stadium sound
room

5000 Series 100 m •••• •••• > 40 A • ••• ••• ••• • ••• ••• ••• ••• ••

3000 Series 100 m •••• •••• 40 A •• ••• ••• ••• •• ••• ••• • ••• ••

System10 Pro 60 m ••• • 10 D •• •• • •• •••

System10 30 m •• • 8 D ••• •• • ••• • •• •

2000 Series 100 m •••• •••• 30 A •• • •• •• ••• ••• •

AT-One 60 m ••• ••• 4 A ••• • • • ••• •••

audio-technica wireless systems guide - 7

WIRELESS SYSTEMS / 5000 SERIES

5000 Series
Frequency-Agile True Diversity UHF Wireless Systems

Comprehensive tuning bandwith

For maximum versatility in ever-congested RF environment, the dual-channel receiver provides a tuning bandwidth
of 230 MHz or 120 MHz (depending on frequency band). Both transmitters (ATW-T5202 and ATW-T5201) feature
a tuning bandwidth of 120 MHz and are available in different frequency ranges to provide complete coverage
of the receiver’s bandwidth. This allows the user to set up systems with high channel counts, whilst offering
the flexibility to tune to open spectrum wherever you travel.

Dual compander for incredible audio quality

Designed for use on professional tours, in stadiums, concert halls, festivals and other demanding audio environments,
the Audio-Technica 5000 Series offers the highest-quality wireless live sound, with dual-compander circuitry that
processes high and low frequencies separately for unparalleled frequency response and dynamic range.

Designed for professionals

The body-pack transmitter provides highest possible wearing comfort due to its small size - 64 mm × 70 mm × 17 mm,
robust and ergonomic full metal body with concealed soft-touch controls, rugged cH-style connector for secure
connection - just to name a few features that meet the needs of professional users.

High channel count

The antenna cascade output connects up to 8 receivers, allowing a single pair of antennas to feed
16 channels of wireless.

Dante® Network Interchangeable cH-Connector

Capsules

8 - audio-technica wireless systems guide

 5000 SERIES / WIRELESS SYSTEMS

back
/ Dante® Receiver
ATW-R5220DAN

back
/ Receiver
ATW-R5220

5000 Series
Operating Frequencies Receiver: Band DG1: 470.125 to 699.875 MHz
cH-style screw-down Band GH1: 700.125 to 819.875 MHz
4-pin connector for secure Transmitter: Band DE1: 470.125 to 590.000 MHz
connection to A-T’s cH-style Band EG1: 580.000 to 699.875 MHz
lavalier and headworn Band GH1: 700.125 to 819.875 MHz
microphones, or cables.
Minimum Frequency Step 25 kHz
Modulation Mode FM
Operating Range 100 m

ATW-R5220/ATW-R5220DAN
Receiving System True diversity
Image Rejection 80 dB nominal
/ Body-Pack Transmitter Sensitivity 18 dBuV at 60 dBA S/N ratio (50 ohms termination)
ATW-T5201 Maximum Output Level XLR, balanced, +18 dBV
Headphone Output 6.3 mm (1/4”) TRS stereo 180 mW, typical
Antenna Input BNC-type, 50 ohms 12 V DC, 150 mA (combined)

ATW-T5201
Frequency Response 23 to 16,300 Hz
Dynamic Range Mic input: 120 dB or higher (A-weighted), typical
Inst input: 107 dB or higher (A-weighted), typical
Input Connection cH-style screw-down 4-pin connector
Spurious Emissions Following federal and national regulations
/ Interchangeable Maximum Deviation ±40 kHz (THD:10%)
Microphone Capsules (IMC) Total Harmonic Distortion 1.0 % or less (at 1 kHz, ±17.5 kHz deviation)
(see page 4) RF Power Output High: 50 mW, Mid: 10 mW, Low: 2 mW (switchable), at 50 ohms
Battery Life High: 7 hours, Mid: 9 hours, Low: 10.5 hours (alkaline)
Dimensions 64 mm × 70 mm × 17 mm (W × D × H)
Net Weight Approx. 92 g

ATW-T5202
Frequency Response 33 to 16,300 Hz Depending on attached microphone element

/ Handheld Transmitter Body Dynamic Range 116 dB or higher (A-weighted), typical

ATW-T5202 Microphone Element Interchangeable industry standard thread

Spurious Emissions Following federal and national regulations
Maximum Deviation ±40 kHz (THD:10%)
Total Harmonic Distortion 1.0 % or less (at 1 kHz, ±17.5 kHz deviation)
RF Power Output High: 50 mW, Mid: 10 mW, Low: 2 mW (switchable), at 50 ohms
Battery Life High: 6.5 hours, Mid: 8 hours, Low: 9.5 hours (alkaline)
Dimensions 193 mm long, 37 mm maximum diameter
Net Weight 200 g

audio-technica wireless systems guide - 9

WIRELESS SYSTEMS / 3000 SERIES

3000 Series
Frequency-Agile True Diversity UHF Wireless Systems

60 MHz tuning bandwidth

The 3000 Series systems are available in several different frequency bands, and each features a wide 60 MHz
tuning range. This allows the user to set up systems with high channel counts, whilst offering the flexibility to tune
to open spectrum wherever you travel. Frequencies can be easily scanned and selected on the receiver
and then synced with the transmitter via IR sync functionality.

Backup frequency button

Unique multifunction button on the handheld and body-pack transmitters can be used to switch to a backup
frequency (on both transmitter and receiver) should interference be encountered.

Network Charging Interchangeable cH-Connector

contacts Capsules

10 - audio-technica wireless systems guide

 3000 SERIES / WIRELESS SYSTEMS

front back
/ Receiver
ATW-R3210

back
cH-style screw-down
4-pin connector for secure
/ Network-Enabled Receiver
connection to A-T’s cH-style ATW-R3210N
lavalier and headworn
microphones, or cables.

/ Body-Pack Transmitter / Handheld Transmitter Body

ATW-T3201 ATW-T3202

/ Interchangeable
Microphone Capsules (IMC)
(see page 4)

audio-technica wireless systems guide - 11

WIRELESS SYSTEMS / 3000 SERIES

One power supply feeds up to five chargers

Up to five docks can be connected to one power supply (AD-SA1230XA - available separately)
to charge a maximum of ten transmitters (per link one AT8687 is required - available separately).

Monitoring and controlling

The ATW-CHG3N networked version of the charging dock allows users to monitor the charging status
of all transmitters in the linked docks (per link one AT8687 is required - available separately).
Only the first dock must be an ATW-CHG3N, all linked docks (up to four) must be ATW-CHG3.

Protection against misuse

The dock automatically shuts off if alkaline or damaged batteries are detected in the transmitters.

Connect to outlet

/ Two-Bay Charging Station

ATW-CHG3 AC adapter (AR-SA 1230XA)

Network cable (Type: RJ45)

/ Two-Bay Networked Charging Station
ATW-CHG3N ATW-CHG3 / ATW-CHG3N ATW-CHG3

Up to 5 units
(4 additional units
connected)

ATW-CHG3 Link kit (AT8687)

12 - audio-technica wireless systems guide

 3000 SERIES / SYSTEM CONFIGURATIONS / WIRELESS SYSTEMS

/ Link Kit for ATW-CHG3

AT8687

ATW-CHG3 Charging Station

Charging Time Approx. 6.5 hours (1,900 mAh rechargeable battery)*
Power Supply DC12V 3.0A
Power Consumption 4.9W (when 2 transmitters are charging)
27.4W (CHG3×5) (5 units are connected and 10 transmitters are charging)
Weight 400 g
/ Power Supply Unit for ATW-CHG3 Accessories Separately available - AC adapter (AD-SA1230XA),
AD-SA1230XA ATW-CHG3 Link kit (AT8687)

3000 Series
Operating Frequencies Band DE2: 470.125 to 529.975 MHz
/ 3000 Series - Band EE1: 530.000 to 589.975 MHz
Body-pack System Band EF1: 590.000 to 649.975 MHz
Band FG1: 650.000 to 699.875 MHz
ATW-3211 Band GH2: 794.100 to 805.900 MHz
Band HH2: 821.100 to 831.900 MHz
and 863.100 to 864.900 MHz
Minimum Frequency Step 25 kHz
Modulation Mode FM
/ 3000 Series - Operating Range 100 m
Body-pack System with AT831cH
ATW-3211/831 ATW-R3210/ATW-R3210N
Receiving System True diversity
Image Rejection 60 dB nominal
Sensitivity 20 dBuV at 60 dBA S/N ratio (50 ohms termination)

/ 3000 Series - Maximum Output Level XLR, balanced, +14 dBV

Body-pack System with BP892xcH 6.3 mm (1/4), unbalanced: +8 dBV (ATW-R3210 only)

ATW-3211/892x Antenna Input BNC-type, 50 ohms 12 V DC, 160 mA (combined)

ATW-T3201
Frequency Response 31 to 15,500 Hz
Dynamic Range Mic input: 115 dB or higher (A-weighted), typical
/ 3000 Series - Inst input: 112 dB or higher (A-weighted), typical
Body-pack System with BP892xcH-TH Input Connection cH-style screw-down 4-pin connector
ATW-3211/892x-TH Spurious Emissions Following federal and national regulations
Maximum Deviation ±38 kHz (THD:10%)
Total Harmonic Distortion 1.0 % or less (at 1 kHz, ±17.5 kHz deviation)
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Battery Life High: 8 hours, Low: 9 hours (alkaline)
/ 3000 Series - High: 9 hours, Low: 9.5 hours (Ni-MH 1900mAh)
Body-pack System with AT899cH
Dimensions 64 mm × 82 mm × 23 mm (W × D × H)
ATW-3211/899 Net Weight Approx. 102 g

ATW-T3202
Frequency Response 25 to 16,700 Hz Depending on attached microphone element
/ 3000 Series - Dynamic Range 115 dB or higher (A-weighted), typical
Handheld System with ATW-C510
Microphone Element Interchangeable industry standard thread
ATW-3212/C510
Spurious Emissions Following federal and national regulations
Maximum Deviation ±36 kHz (THD:10%)
Total Harmonic Distortion 1.0 % or less (at 1 kHz, ±17.5 kHz deviation)

/ 3000 Series - RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms

Handheld System with ATW-C710 Battery Life High: 8 hours, Low: 9 hours (alkaline)
ATW-3212/C710 High: 9 hours, Low: 9.5 hours (Ni-MH 1900mAh)
Dimensions 193 mm long, 37 mm maximum diameter
Net Weight 200 g

audio-technica wireless systems guide - 13

WIRELESS SYSTEMS / 2000 SERIES

2000 Series
Frequency-Agile True Diversity UHF Wireless Systems

Easy to use
Easy setup, automatic scanning and other advanced wireless features - affordable as never before.
Though the 2000b system is designed for professional use, the user does not need special training to operate it.
Once unboxed, it’s ready to roll! Standard automatic frequency scanning finds and sets the best
available channel at the touch of a button. Using multiple wireless systems simultaneously, as any of its 10 preset
channels can be used together.

12V antenna power

The ATW-R2100b receiver delivers a bias voltage of 12V / 60mA from each BNC antenna input, enabling the use
of antenna boosters or other active components.

Charging cW-Connector
contacts

14 - audio-technica wireless systems guide

 2000 SERIES / SYSTEM CONFIGURATIONS / WIRELESS SYSTEMS

front back
/ Receiver
ATW-R2100b
Locking 4-pin microphone
connector for use with
Audio-Technica cW-style wireless
body-pack transmitters.

/ Two-Bay Recharging Station / Handheld Transmitter

ATW-CHG2 ATW-T220a

2000 Series
Operating Frequencies I Band: 487.125 to 506.500 MHz
U Band: 606.500 to 631.000 MHz
D Band: 656.125 to 678.500 MHz
/ Body-pack Transmitter F Band: 854.900 to 864.900 MHz
ATW-T210a Max. Number of Channels 10
Modulation Mode FM
Operating Range 100 m

ATW-R2100b
Receiving System True diversity
/ 2000 Series - Body-pack System
Image Rejection 55 dB nominal, 50 dB minimum
ATW-2110b
Sensitivity 20dBµV (S/N 60dB at 5 kHz deviation, IEC-weighted)
Maximum Output Level XLR, balanced, +14 dBV - 6.3 mm (1/4), unbalanced: +8 dBV
/ 2000 Series - Body-pack System with AT-GcW
Antenna Input BNC-type, 50 ohms 12 V DC, 60 mA (each)
ATW-2110b/G

/ 2000 Series - Body-pack System with PRO8HEcW ATW-T210a

ATW-2110b/H Frequency Response 100 to 15,500 Hz
Dynamic Range 110 dB or higher (A-weighted), typical
/ 2000 Series - Body-pack System with ATM75cW Input Connection cH-style screw-down 4-pin connector
ATW-2110b/HC1 Spurious Emissions Following federal and national regulations
Maximum Deviation ±40 kHz (THD:10%)
/ 2000 Series - Body-pack System with ATM73cW Total Harmonic Distortion 1.0 % or less (at 1 kHz, ±17.5 kHz deviation)
ATW-2110b/HC2 RF Power Output High: 30 mW, Low: 10 mW (switchable)
Battery Life High: 7 hours, Low: 9 hours (alkaline)
/ 2000 Series - Body-pack System with AT829cW Dimensions 66 mm × 92 mm × 23 mm (W × D × H)
ATW-2110b/P Net Weight Approx. 81 g

/ 2000 Series - Body-pack System with AT899cW

ATW-T220a
ATW-2110b/P1 Frequency Response 100 to 15,000 Hz
Dynamic Range 110 dB or higher (A-weighted), typical
/ 2000 Series - Body-pack System with AT831cW Microphone Element Cardioid, dynamic
ATW-2110b/P2 Spurious Emissions Following federal and national regulations
Maximum Deviation ±40 kHz (THD:10%)
/ 2000 Series - Body-pack System with MT838cW Total Harmonic Distortion 1.0 % or less (at 1 kHz, ±20 kHz deviation)
ATW-2110b/P3 RF Power Output High: 30 mW, Low: 10 mW (switchable)
Battery Life High: 7 hours, Low: 9 hours (alkaline)
/ 2000 Series - Handheld System Dimensions 232 mm long, 48 mm maximum diameter
ATW-2120b Net Weight 252 g

audio-technica wireless systems guide - 15

WIRELESS SYSTEMS / AT-ONE

AT-One
Wireless System

Easy to use
AT-One is designed with simplicity and ease-of-use in mind. Equipped with a practical carrying case,
rack-mount kit and detachable antenna, AT-One is the perfect balance of price and performance,
ideal for those looking for accurate, reliable performance at an entry-level price.
The AT-One’s frequency plan is divided into two groups with four available channels in each group.
All four channels in a group can be used simultaneously.

Cardioid condenser capsule – induction loop ready

The condenser microphone capsule in the ATW-T1 handheld transmitter prevents inductive feedback
from nearby hearing loops.

12V antenna power

The ATW-R1 receiver delivers a bias voltage of 12V / 100mA from each BNC antenna input, enabling the use
of antenna boosters or other active components.

cW-Connector

16 - audio-technica wireless systems guide

 AT-ONE / SYSTEM CONFIGURATIONS / WIRELESS SYSTEMS

ANT B AUDIO OUT ANT A

SQ DC 12V 500mA
LINE MIC

BALANCED UNBALANCED

front back

Locking 4-pin microphone / Receiver

connector for use with
Audio-Technica cW-style wireless
ATW-R1
body-pack transmitters.

/ Handheld Transmitter
ATW-T3
/ Body-pack Transmitter
ATW-T1
AT-One
Operating Frequencies Band DE3: 482.625 to 511.375 MHz
Band HH2: 824.400 to 830.850 MHz
& 863.300 to 864.700 MHz
Max. Number of Channels 2x4
Modulation Mode FM
Operating Range 60 m

ATW-R1
Receiving System Antenna switching diversity
/ AT-One - Image Rejection 55 dB minimum
Body-pack System Sensitivity 10 dBμV (S/N 60 dB @ 20 kHz deviation)
ATW-11 Maximum Output Level XLR, balanced, +4 dBV - 6.3 mm (1/4), unbalanced: –2 dBV
Antenna Input BNC-type, 50 ohms 12 V DC, 100 mA (each)

ATW-T1
/ AT-One - Frequency Response 60 to 16,000 Hz
Body-pack System with AT-GcW
Dynamic Range 103 dB or higher (A-weighted), typical
ATW-11/G Input Connection cW-style lock-down 4-pin connector
Spurious Emissions Following federal and national regulations
Maximum Deviation ±40 kHz (THD:10%)
Total Harmonic Distortion 1.0 % or less (at 1 kHz, –20 kHz deviation)
/ AT-One - RF Power Output 10 mW
Body-pack System with PRO9cW Battery Life 10 hours (alkaline)
ATW-11/H Dimensions 66 mm × 98 mm × 22 mm (W × D × H)
Net Weight Approx. 71 g

ATW-T3
/ AT-One - Frequency Response 60 to 16,000 Hz
Body-pack System with ATR35cW
Dynamic Range 108 dB or higher (A-weighted), typical
ATW-11/P Microphone Element Cardioid, condenser
Spurious Emissions Following federal and national regulations
Maximum Deviation ±40 kHz (THD:10%)
Total Harmonic Distortion 1.0 % or less (at 1 kHz, -20 kHz deviation)
/ AT-One - RF Power Output 10 mW
Handheld System Battery Life 10 hours (alkaline)
ATW-13 Dimensions 268 mm long, 52 mm maximum diameter
Net Weight 277 g

audio-technica wireless systems guide - 17

 Wireless
DIGITAL SystemsSYSTEMS
WIRELESS | System 10/ PRO
SYSTEM 10

System 10
Digital Wireless Systems

Easy to use
System 10 is a digital high-fidelity wireless system designed to provide 24-bit operation, easy setup and clear,
natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers
extremely easy operation and instantaneous channel selection. Up to eight channels may be used together
without any frequency coordination problems or group selection issues. System 10 receivers and transmitters
offer an easy-to-read digital ID display.

Three levels of diversity assurance

System 10 provides three levels of diversity: frequency, time and space. Frequency diversity transmits the signal on
two frequencies simultaneously for better protection against frequency interference. Time diversity sends the
signal twice to maximise signal integrity. Finally, space diversity uses two antennas on each transmitter and
receiver to optimize immunity against multipath interference.

2.4
GHz
Frequency cW-Connector

Featuring
System 10 PRO Remote-Mountable
Receiver Units
Digital Wireless Systems

A compact and expandable system

With an RJ12 cable supplied with each system, it is possible to connect up to 5 frames (10 receivers). While many
systems can operate without being connected, this is not recommended. Indeed, linking the systems to create a
more stable environment in which receivers are coordinated for the reception, transmission and frequency
allocation avoids signal loss and optimizes the simultaneous use of the 10 channels.

18 - audio-technica wireless systems guide

 SYSTEM 10 PRO / SYSTEM CONFIGURATIONS / DIGITAL WIRELESS SYSTEMS

front front
/ Single Channel Receiver / Dual Channel Receiver
ATW-R1310 ATW-R1320
Locking 4-pin microphone
connector for use with
Audio-Technica cW-style wireless
body-pack transmitters.

back

/ Body-Pack Transmitter
ATW-T1001
(specifications, see page 20)

/ Boundary Microphone Transmitter / Microphone Desk Stand Transmitter

ATW-T1006 ATW-T1007

System 10 PRO
/ Handheld Transmitter-
Operating Frequencies 2.4 GHz ISM Band
ATW-T1002
(specifications, see page 20) Max. Number of Channels 10
Audio Sampling 24 bit / 48 kHz
Operating Range 60 m
/ System 10 PRO -
Rack-Mount Digital Wireless System ATW-R1310 & ATW-R1320
ATW-1301 Receiving System Diversity (frequency / time / space)
Maximum Output Level XLR, balanced, +6 dBV - 6.3 mm (1/4), unbalanced: 0 dBV

ATW-T1006
/ System 10 PRO - Maximum Input Sound Level 139 dB SPL
Rack-Mount Digital Wireless System RF Power Output 10 mW
ATW-1311 Spurious Emissions Following federal and national regulations
Internal Battery 3.7 V Rechargeable Li-ion Battery
Battery Rating 5.5 Wh; 1,460 mAh
/ System 10 PRO - Battery Life 9 hours (Battery charging time: 4 hours 30 minutes)
Rack-Mount Digital Wireless System Dimensions 96.1 mm W × 38.0 mm H × 122.8 mm D
ATW-1312 Net Weight 408 grams

ATW-T1007
RF Power Output 10 mW
/ System 10 PRO -
Rack-Mount Digital Wireless System Spurious Emissions Following federal and national regulations
Phantom Power
ATW-1302 12V DC
Internal Battery 3.7 V Rechargeable Li-ion Battery
Battery Rating 5.5 Wh; 1,460 mAh
Battery Life 9 hours (Battery charging time: 4 hours 30 minutes)
/ System 10 PRO - Dimensions 96.1 mm W × 44.2 mm H × 122.8 mm D
Rack-Mount Digital Wireless System
Net Weight 392 grams
ATW-1322
ATW-T1001 & ATW-T1002 (specifications, see page 20)

audio-technica wireless systems guide - 19

DIGITAL WIRELESS SYSTEMS / SYSTEM 10 STACK-MOUNT

System 10
Digital Wireless Systems

Automatic frequency selection

The System 10 automatically changes its frequency. Unlike other systems on the market that attach to
2 or 4 frequency, the System 10 will constantly “monitor” the frequencies and switch if necessary.
Thus, there are always a good 2 frequencies in the system, and the user does not need to manually intervene.

/ Receiver
ATW-R1100
System 10 - Stack-Mount
Operating Frequencies 2.4 GHz ISM Band
Max. Number of Channels 8
Audio Sampling 24 bit / 48 kHz
Operating Range 30 m

ATW-R1100
Receiving System Diversity (frequency / time / space)
Locking 4-pin microphone
connector for use Maximum Output Level XLR, balanced, +6 dBV - 6.3 mm (1/4), unbalanced: 0 dBV
with Audio-Technica
cW-style wireless ATW-T1001
body-pack transmitters.
Frequency Response 20 to 20,000 Hz
Dynamic Range 109 dB or higher (A-weighted), typical

/ Body-Pack Transmitter Input Connection cW-style lock-down 4-pin connector

ATW-T1001 Spurious Emissions Following federal and national regulations

Total Harmonic Distortion 0.05 % or less
RF Power Output 10 mW
Battery Life 7 hours (alkaline)
/
Handheld Transmitter
Dimensions 72 mm × 107 mm × 25 mm (W × D × H)
ATW-T1002 Net Weight Approx. 100 g

ATW-T1002
Frequency Response 20 to 20,000 Hz
/ System 10 - Dynamic Range 109 dB or higher (A-weighted), typical
Body-pack System Microphone Element Unidirectionnal, dynamic
ATW-1101 Spurious Emissions Following federal and national regulations
Total Harmonic Distortion 0.05 % or less
RF Power Output 10 mW
/ System 10 -
Handheld System Battery Life 7 hours (alkaline)
ATW-1102 Dimensions 255 mm long, 50 mm maximum diameter
Net Weight 280 g

20 - audio-technica wireless systems guide

 SYSTEM 10 CAMERA-MOUNT / DIGITAL WIRELESS SYSTEMS

System 10 Camera-Mount
Portable Camera-Mount Digital Wireless Systems

Small and compact design

With its compact and portable design, the System 10 Digital Wireless Camera System is ideal for video production,
reporting and all intermediate mobile applications, the receiver offers several mounting options to suit a wide
variety of cameras and recording devices. Each System 10 camera mount wireless system includes a camera
mounting spigot in addition to the receiver and the transmitter.

/ Camera-Mount Receiver
ATW-R1700

System 10 -
Camera-mount Body-pack System
ATW-1701 / Body-Pack Transmitter
ATW-T1001 (see page 20)
/ Handheld Transmitter
/ System 10 - ATW-T1002 (see page 20)
Camera-mount Body-pack System
with AT8350
ATW-1701x3M
System 10 - Camera-Mount
Operating Frequencies 2.4 GHz ISM Band
/ System 10 PRO -
Camera-mount Body-pack System Max. Number of Channels 8
with AT829cW Audio Sampling 24 bit / 48 kHz
ATW-1701/P1 Operating Range 30 m

ATW-R1700
/ System 10 -
Camera-mount Handheld System Receiving System Diversity (frequency / time / space)

ATW-1702 Maximum Output Level 3.5 mm, TRS balanced, +6 dBV

3.5 mm, TRS unbalanced: 0 dBV
Battery Type Internal Battery: 3.7V rechargeable Li-ion battery

/ System 10 - Battery Life 12 hours (Battery charging time: 4 hours 30 minutes)

Camera-mount Handheld System Dimensions 56 mm × 91 mm × 28 mm (W × D × H)
with AT8350 Weight Approx 105 g
ATW-1702x3M
ATW-T1001 & ATW-T1002 (specifications, see page 20)

audio-technica wireless systems guide - 21

WIRELESS SYSTEMS / ANTENNAS

Connected Accessory ATW-A49 ATW-A410P ATW-B80WB ATW-49CB ATW-49SP ATW-DA49a

Current Requirement 0 mA 60mA 60mA 30mA 30mA 0 mA
Current per antenna
Used wireless system input @12V
AT-One ATW-R1 100 mA + 1 pair 1 pair 2 pair 1 pair (*) +
2000 Series ATW-R2100 60 mA + 1 pair 1 pair 2 pair 1 pair (*) +
3000 Series ATW-R3210 80 mA + 1 pair 1 pair 2 pair 1 pair (*) +
5000 Series ATW-R5220 75 mA + 1 pair 1 pair 2 pair 1 pair (*) +
System 10 All receiver - - - - - - -
See
Distribution amplifier ATW-DA49A 250 mA + 2 pair (**) 4 pair 2 pair (***) 1 pair (*) application 6
(*) Although possible to power more than 1 pair it is recommended to use an ATW-DA49a instead.
(**) You would require to use a pair of ATW-49CB to connect 2 pairs of antennas.
(***) 2 pairs would allow to connect 4 pairs of passive antennas (A49) - no active antennas.
Please use the above table to determine the maximum numbers of active componets in the antenna cable run.
Example: AT-One (100 mA per antenna cable run) could drive 1 pair of ATW-B80WB boosters and 1 pair of ATW-49SP splitter. (60 mA + 30 mA = 90 mA).
Example: ATW-DA49a (250 mA per antenna cable run) could drive 2 pairs of ATW-A49 (0 mA), 2 pairs of ATW-B80WB boosters (2x 60mA per antenna run) and 1 pair
of ATW-49CB (30 mA): Total: 2x 150 mA.

ATW-DA49a
UHF Antenna Distribution Systems

Specifications ATW-DA49a
Durability Antenna Power (optional) 12V DC, 250 mA (combined)
Current Consumption 200 mA ± 50 mA at 12 V DC
The ATW-DA49a provides a high OIP3 (+ 32 dBm)
Gain +1.0dB typical (within specified bandwidth)
for maximum protection against intermodulation.
Input 2 x 1 inputs
OIP3 +32dBm typical (within specified bandwidth)
Output 2 x 4 outputs + 1 cascade output - BNC Female
Operating Bandwidth 470-990 MHz
Power Supply 100-240V AC (50/60 Hz) to 12V DC 1A (centre positive)
switched mode external power supply
/ Active Antenna Combiner Kit (pair)
ATW-49CB

Specifications ATW-49SP ATW-49CB

Description 2-Way Active Antenna Splitter 2-Input Active Combiner
Bandwidth 440 MHz to 900 MHz 440 MHz to 900 MHz
VSWR < 1.7:1 (within specified bandwidth) < 1.7:1 (within specified bandwidth)
Gain 0 dB typical (within specified bandwidth) 0 dB typical (within specified bandwidth)

/ Active Antenna Splitter Kit (pair) Impedance 50 ohms, typical (within specified bandwidth) 50 ohms, typical (within specified bandwidth)
Termination Type
ATW-49SP 3-BNC Female 3-BNC Female
Weight 51 g 51 g
Dimensions 61 mm W x 47 mm L x 23 mm H 61 mm W x 47 mm L x 23 mm H
DC Input 5-14V DC 5-14V DC
Current 30 mA @ 12V DC 30 mA @ 12V DC
Pass-through Current 100 mA 120 mA (maximum to both inputs combined)

22 - audio-technica wireless systems guide

 ANTENNAS / WIRELESS SYSTEMS

Specifications ATW-A49
Antenna Type Log Periodic Dipole Array (LPDA)
Operating Bandwidth 440 – 900 MHz
Gain 6 dB typical*
Impedance 50 ohms typical*
VSWR ≤ 1.7:1*
Polar Pattern Elliptical, 90° acceptance, typical
Polarization Vertical (when mounted vertically)
Number of Elements 9
Maximum Power Input Not specified (intended as receive antenna only)
Termination Type Fixed right-angle BNC female Connector
is positioned to minimize cable strain
Weight 326 g each
Dimensions 268 mm L x 285 mm H x 25 mm D
/ UHF Wide-Band Directional LPDA Antennas (pair)
Material Copper-clad epoxy fiberglass
ATW-A49

Specifications ATW-A410P
Gain -10 dB / 0 dB / +6 dB / +12 dB
OIP3 > 30 dBm typical (within specified bandwidth)
Termination Type BNC-J
Operating Bandwidth 470-990 MHz
Operating Temperature Range -10°C to 50°C
Dimensions 175 x 175 x 50 mm (without bracket)
Weight 390 g (without bracket)
Accessories Mounting bracket, screws
Impedance 50 ohms typical (within specified bandwidth)
Power Consumption 60mA
/ UHF Powered Wideband Antenna (single)
ATW-A410P

Specifications ATW-B80WB
Connections BNC-J (IN), BNC-J (OUT)
Power Supply DC 12 V
Frequency Range 470 - 990 MHz
Impedance 50 ohms
Power Consumption 60mA
Gain High +12 dB Red, +6 dB Green
Connections BNC-J (IN), BNC-J (OUT)

/ In-Line RF booster 470-990MHz 6dB / 12dB (pair) Power Supply DC 12 V

ATW-B80WB

/ 0.9m RF Antenna Cable / 4m RF Antenna Cable / 8m RF Antenna Cable / 15m RF Antenna Cable
AC3 AC12 AC25 AC50

audio-technica wireless systems guide - 23

WIRELESS SYSTEMS / ACCESSORIES

/ Antenna Front-Mount Kit

ATW-AF1

For ATW-DA49a

/ Universal Joining Plate for AT 9.5” devices

AT8631
For ATW-R3210, ATW-R3210N, ATW-R2100b,
ATW-R1300, ATW-R1310, ATW-R1320
/ Receiver Unit Wall-Mount Holder and other AT 9.5” devices
AT8690
For System 10 PRO, ATW-RU13

/ Camera Shoe Dual Mount

AT8691
/ 3.5 mm - XLR Cable (ATW-R1700) For System 10, ATW-R1700
AT8350

/ 3.5 mm - 3.5 mm Cable (ATW-R1700)

AT8349

/ Dual Rack-Mount Kit

AT8677
For AT-One, ATW-R1

/ Rack-Mount Tray
AT8674
For System 10, ATW-R1100

/ Blanking Plate
AT8675
For AT8674

24 - audio-technica wireless systems guide

 cH MIC SUMMARY / WIRELESS SYSTEMS

cH-Version cW-Version

/ Subminiature BP892xcH BP892xcW

Omnidirectional Condenser
Headworn Microphone & BP892xcH-TH & BP892xcW-TH

/ Subminiature BP893xcH BP893xcW

Omnidirectional Condenser
Headworn Microphone & BP893xcH-TH & BP893xcW-TH

/ Subminiature Cardioid BP894xcH BP894xcW

Condenser Headworn
Microphone & BP894xcH-TH & BP894xcW-TH

/ Cardioid Condenser ATM73cH ATM73cW

Headworn Microphone

/ Cardioid Condenser ATM75cH ATM75cW

Headworn Microphone

/ Hypercardioid Dynamic PRO8HEcH PRO8HEcW

Headworn Microphone

/ Cardioid Condenser PRO9cH PRO9cW

Headworn Microphone

/ Omnidirectional Condenser PRO92cH PRO92cW

Headworn Microphone & PRO92cH-TH & PRO92cW-TH

audio-technica wireless systems guide - 25

WIRELESS SYSTEMS / cH/cW

cH-Version cW-Version

/ Subminiature
Cardioid Condenser AT898cH AT898cW
Lavalier Microphone

/ Subminiature AT899cH AT899cW

Omnidirectional Condenser
Lavalier Microphone & AT899cH-TH & AT899cW-TH

/ Miniature Cardioid
Condenser Lavalier AT831cH AT831cW
Microphone

/ Miniature Omnidirectional
Condenser Lavalier AT803cH AT803cW
Microphone

/ Cardioid Condenser AT829cH AT829cW

Lavalier Microphone

/ Omnidirectional Condenser MT838cW

Lavalier Microphone

/ Omnidirectional Condenser MT830cH MT830cW

Lavalier Microphone

/ Omnidirectional Condenser ATR35cW

Lavalier Microphone

26 - audio-technica wireless systems guide

 cH/cW / WIRELESS SYSTEMS

cH-Version cW-Version

/ Cardioid Condenser
Instrument Microphone
w/ Universal Clip-on
ATM350UcH ATM350UcW
Mounting System

/ Cardioid Condenser
Clip-on Instrument PRO35cH PRO35cW
Microphone

/ Professional AT-GcH PRO AT-GcW PRO

Guitar Input Cable

/ Professional AT-GRcH PRO AT-GRcW PRO

Guitar Input Cable Angled

/ Guitar Input Cable AT-GcH AT-GcW

/ Microphone Input Cable XLRcH XLRW

/ Adapter Cable AT-cWcH

audio-technica wireless systems guide - 27

WIRELESS SYSTEMS / APPLICATION 1

Dual-channel wireless system

When more than one wireless microphone system is required, you may find that in certain circumstances
using two receivers side-by-side with individual antennas is unsuitable. For example, where the receiver needs
to be placed out of sight or in a different room, such as installation for a multi-purpose venue,
house of worship or a small live music performance.

The solution is to utilise one pair of antennas placed in the room to feed both the receivers.
The signal is passed from the room over two 50 Ohm RF cables to the receivers’ location, where the antenna
signals are split into each receiver using the ATW-49SP Active Antenna Splitter Kit.
Check the signal loss of the antenna cable, based on the frequency range of your system and the specified
antenna cable length and type. Audio-Technica’s wireless manager software offers a “cable loss calculation tool”
to do so. If the dB loss exceeds 7 dB, you should consider including the ATW-B80WB In-Line RF Booster as each
6dB of loss across the signal chain will reduce your systems operating distance by 50%.
The ATW-A49SP is powered by the receivers across the antenna cable – no external power source is required.
Though our example includes the ATW-A49 LPDA Antenna, any passive antennas can be used provided they
support the frequency range of your wireless systems.
If you require an active antenna like our ATW-A410P, or other active components such as the ATW-B80WB,
then check the total current consumption of the individual products (simply add their stated mA together
per RF cable run) to make certain that your receiver delivers the necessary power.
Compatible Audio-Technica wireless systems for this solution include the AT-One, 2000 Series
and 3000 Series.

ATW-A49

ATW-49SP

ATW-R2100b

Product table
Quantity Code Description Alternative
2 ATW-R2100b Frequency-agile True Diversity UHF Wireless Receiver
2 ATW-T210a 2000a Series UniPak™ Transmitter ATW-T220a Handheld Transmitter
1 ATW-A49 Pair of UHF Wide-band Directional LPDA Antennas
1 ATW-49SP Active Antenna Splitter Kit
2 AC25 25’/7.6m RF Antenna Cable AC12, AC50

28 - audio-technica wireless systems guide

 APPLICATION 2 / WIRELESS SYSTEMS

Single-channel wireless system covering two zones

In some situations, only one wireless system is required, but there is the need to guarantee coverage over two
separate areas. This, in most cases, is simply not achievable using one pair of antennas. An example of this would
be when needing to cover an indoor area and its associated outdoor space, such as you may find in a restaurant,
bar, or house of worship setting. Alternatively, a client may have a hotel ballroom which also divides into two
multi-function areas, resulting in the need to cover the sections individually.

To achieve this solution, you will need two pairs of antennas – one pair per area requiring coverage.
Then, the four antenna cables run to the receiver location, and they are combined using the ATW-49CB Active
Antenna Combiner Kit. The resulting two antenna cables can then connect directly to the wireless receiver.
Take care to position the ATW-49CB as close to the antennas as possible, to minimise the quantity of antenna
cable required in the installation – this will improve signal integrity and reduce cost for the customer.
Refer to the notes in Application 1 for advice on specifying cable length, active antennas and boosters
in the cable run.
If the receiver in use can provide adequate current, it is possible to combine Application 1 and Application 2
to create a dual-channel wireless solution with the ability to cover two zones – simply add the ATW-49SP
between the ATW-49CB and the receiver.
Compatible Audio-Technica wireless systems for this solution include the AT-One, 2000 Series, 3000 Series and
5000 Series.

Zone 1 Zone 2

ATW-A49

ATW-49CB

ANT B AUDIO OUT ANT A

SQ DC 12V 500mA
LINE MIC

BALANCED UNBALANCED

ATW-R1

Product table
Quantity Code Description Alternative
1 ATW-R1 Frequency-agile True Diversity UHF Wireless Receiver
1 ATW-T1 AT-One Beltpack Transmitter ATW-T3 Handheld Transmitter
2 ATW-A49 Pair of UHF Wide-band Directional LPDA Antennas
1 ATW-49CB Active Antenna Combiner Kit
4 AC25 25'/7.6m RG8 Antenna Cable AC12, AC50

audio-technica wireless systems guide - 29

WIRELESS SYSTEMS / APPLICATION 3

Multiple zones wireless system

If you need to cover more than two areas which are in proximity of one another, or you simply need to cover one very large
area, then this solution may suit your requirements. Consider the need for a wireless microphone which needs to operate
throughout the areas of a shopping mall, or over the very wide area of a sports venue – such as a golf course.

Initially, you may consider using multiple pairs of antennas, combining them with multiple ATW-49CB. However, this is not
usually the best approach, as you will either run into power issues or the total cable runs will become too long to
compensate for incurred RF loss with signal boosters.
This application offers a more elegant solution. The concept begins with placing a wireless receiver of the same type,
tuned to the same frequency, in each area with a local pair of antennas.
If you were to use these receivers alone, you could operate the transmitter in each room, provided you activate only one
receiver at a time. Then, the audio signal can be sent from the active receiver to the local speaker system as needed.
In this scenario, you must manually switch off or mute the unused receivers in order to avoid erratic audio signals being
output whilst the wireless transmitter is out of range.
In most cases, this option is not practical. It may not be possible to continually ensure unused receivers are switched off
between uses, or a project may demand that the wireless transmitter must work across all areas freely – without continual
adjustment by a technician.
The solution is to add the ATDM-0604 Digital SmartMixer. Simply connect the audio signals from each receiver to the
ATDM-0604 and set the unit to Smart Mix mode, making sure to allow only one open microphone at a time. This way,
a receiver remains active in the mixer until an audio drop out occurs, which will trigger the mixer to automatically
switch to the receiver featuring the most reliable signal. With this solution, you can combine up to six areas,
whilst creating one reliable output signal.
Check Application 1 for important information on total cable length, active antennas or using boosters in your antenna
cable run. It is possible to combine Application 3 with Application 2 in some or all zones to increase the area of coverage
even further. Also, it is possible to combine Application 3 with Application 4. In this case, you will require one ATDM mixer
for each wireless microphone you want to use.
Compatible Audio-Technica wireless systems for this solution include the AT-One, 2000 Series and 3000 Series.

Product table
Quantity Code Description Alternative
6 ATW-R2100b Frequency-Agile True Diversity UHF Wireless Receiver
1 ATW-T210a 2000 Series Beltpack Transmitter ATW-T220a Handheld Transmitter
1 ATDM-0604 Digital SmartMixer

30 - audio-technica wireless systems guide

 APPLICATION 3 / WIRELESS SYSTEMS

Zone 1 Zone 2

Zone 3 Zone 4

Zone 5 Zone 6

To Speakers

Computer Audio I/O

LAN Connection for Web Remote Manager

Equipment used
ATDM-0604 ATW-T210a ATW-T220a

6 x ATW-R2100b 1x or

audio-technica wireless systems guide - 31

WIRELESS SYSTEMS / APPLICATION 4

Four-channel wireless system

A four-channel wireless system is often required by live music acts, podium discussions, or in fixed installations
for multi-purpose rooms. Rental companies may also design their wireless systems in blocks of four channels
for small to medium sized events, as these racks are easy to handle whilst being easily scaled up to a larger
system when required (see Application 6).

This solution is similar in design to Application 1. The primary difference is the inclusion of the ATW-DA49a,
which can divide the incoming pair of antenna signals into four individual signal pairs to feed each receiver.
However, this change does not only offer more outputs. In Application 1, the ATW-49SP is powered by the
receiver, while in this setup the ATW-DA49a is powered by mains voltage. As a result, the ATW-DA49a
distribution amplifier can provide significantly more antenna power for active components in the cable run.
Due to the higher current this unit can deliver, it is possible to realise much longer cable runs,
with more than one ATW-B80WB booster, as well as drive antenna combiners and active antennas
before reaching a power limitation.
Check Application 1 for important information on total cable length, active antennas or using boosters
in your antenna cable run. This application can be combined with Application 2 and is the core design
for achieving Application 6.
Compatible Audio-Technica wireless systems for this solution include the AT-One, 2000 Series
and 3000 Series.

Product table
Quantity Code Description Alternative
4 ATW-R3210 Frequency-Agile True Diversity UHF Wireless Receiver ATW-R3210N
4 ATW-T3201 3000 Series Beltpack Transmitter ATW-T3202 Handheld Transmitter
1 ATW-DA49a UHF Antenna Distribution System
1 ATW-A49 Pair of UHF Wide-band Directional LPDA Antennas ATW-A410P
1 ATW-B80WB Pair of In-Line RF boosters 470-990MHz
4 AC25 25'/7.6m RG8 Antenna Cable AC12, AC50, AC100

32 - audio-technica wireless systems guide

 APPLICATION 4 / WIRELESS SYSTEMS

ATW-A49

AN TE NNA AN TE NNA

AT W- B 80 WB AT W- B 80 WB
IN-LINE AMPLIFIER IN-LINE AMPLIFIE R

ATW-B80WB
RECEIVER RECEIVER

ATW-R3210

Equipment used
ATW-A49 ATW-B80WB

ATW-DA49a
AN TE NN A AN TE NN A

AT W- B 80 WB AT W- B 80 WB
IN-LINE AMPLIFIE R IN-LINE AMPLIFIE R

RECEIVE R RECEIVER

4 x ATW-R3210 ATW-T3201 ATW-T3202

4x or

audio-technica wireless systems guide - 33

WIRELESS SYSTEMS / APPLICATION 5

Multi-channel wireless system for install

This solution is aimed at fixed installations where the use of UHF TV bands is not preferred, such as in locations with a restricted
RF environment or where the customer wishes to avoid licensing costs and the need for frequency coordination. Typical
applications for this include educational facilities such as schools or universities, multi-function rooms, or conference centres.

This application is based around our System 10 Pro wireless system. System 10 does not use the UHF TV band frequency
spectrum (470 - 865 MHz) associated with our other wireless products but operates on the 2.4GHz spectrum, most used
for WLAN and Bluetooth® transmission. 2.4GHz offers many benefits, but you must also consider its limitations when using
it for wireless audio.
The immediate advantage is that System 10 Pro is completely license free in almost all countries and requires no frequency
planning by the installer or operator. However, due to the small wavelength of the 2.4GHz signal (around 12cm),
the operating range is shorter than our other wireless systems which use the lower UHF range. This solution is not ideal
for open-air scenarios, where long operating distance is required.
However, reduced operating range can also have benefits. For example, if multiple rooms located side-by-side all require
a dedicated wireless system, you can reuse the same spectrum by using System 10 Pro in adjacent rooms – very little
physical separation between rooms is required.
Another challenge with the 2.4GHz range is the parallel use of Wi-Fi alongside our wireless system. In this case,
it is recommended to utilise 5.8GHz for Wi-Fi connectivity in place of 2.4GHz. If this is not possible, the placement
of your wireless microphone receiver becomes very important. Here is why System 10 Pro offers the right solution.
2.4GHz antenna cables suffer from higher power losses over their cable run than UHF frequencies. At the same time, many
installers do not wish to locate audio racks of receivers in the meeting room, but instead place them in a separate A/V room
with the audio mixer and other equipment.
With System 10 Pro, the ATW-RU13 receiver unit can be removed and mounted remotely, connecting to the ATW-RC13 via
standard ethernet cable. The ATW-RC13 can stay in the audio rack, whilst the ATW-RU13 can be mounted up to 100m
away – on a wall, in the presenter podium, or hidden above the false ceiling in the room. The ATW-RU13 receiver unit
is compact in size, and its included wall-mount housing can be painted in any colour to conceal it further.
Ensure to mount ATW-RU13 units as close as possible to the area where the wireless microphones will be used
and aim to position any Wi-Fi access points at the opposite side of the room for maximum signal stability.
The compatible Audio-Technica wireless system for this solution is the System 10 Pro.

Product table
Quantity Code Description Alternative
3 ATW-R1320 System 10 Pro Dual Channel Receiver
6 ATW-T1006 System 10 Boundary Microphone Transmitter ATW-T1001, ATW-T1002, ATW-T1007
1 ATDM-0604 Digital SmartMixer

34 - audio-technica wireless systems guide

 APPLICATION 5 / WIRELESS SYSTEMS

ATW-RU13

Cat. 5e Cable

ATW-RC13

To Speakers

ATDM-0604

Computer Audio I/O

LAN Connection for Web Remote Manager

Equipment used ATW-T1001 ATW-T1002

ATDM-0604

or

6x
3 x ATW-R1320
ATW-T1006 ATW-T1007

or

audio-technica wireless systems guide - 35

WIRELESS SYSTEMS / APPLICATION 6

16-channel wireless system using ATW-DA49a

Where more than four wireless systems are required, this solution may be the answer. Typical applications include larger live
bands, music festivals featuring multiple acts, theatre productions, larger conferences, and in sports broadcast where wireless
microphones are used to collect sounds of the event.

This solution begins with the 4-channel system from Application 4. In this scenario, up to four of the 4-channel racks
are used and then they are linked together using one ATW-DA49a UHF Antenna Distribution System, achieving 16 channels
of wireless audio.
Note: pay special attention to the “star” topology wiring of this example: the top ATW-DA49a feeds the antenna inputs
of the following four ATW-DA49a. This means that each antenna signal is passing through no more than two antenna
distribution units before reaching the receiver.
Also, that the ATW-DA49a’s link output have not been used in this scenario. If only eight channels are required,
it is acceptable to use the ATW-DA49a’s link output to pass the signal along to a second ATW-DA49a – the eight receivers
then connect via each distributor’s antenna outputs. However, once more wireless systems are needed, it is best practice
to implement the star topology given in this example to avoid unnecessary RF signal degradation.
This concept is easily scalable, making it ideal for rental companies, or businesses with flexible technical requirements.
Several self-contained modules of four-channel systems can be used and then quickly combined using one additional
ATW-DA49a, as and when required.
Refer to the notes in Application. 1 for advice on specifying cable length, active antennas and boosters in the cable run.
This application can be combined with Application 2 and relies on Application 4.
Compatible Audio-Technica wireless systems for this solution include the 2000 Series and 3000 Series.

Product table
Quantity Code Description Alternative
16 ATW-R3210N Frequency-Agile True Diversity UHF Wireless Receiver ATW-R3210
16 ATW-T3201 3000 Series Beltpack Transmitter ATW-T3202 Handheld Transmitter
5 ATW-DA49a UHF Antenna Distribution System
1 ATW-A49 Pair of UHF Wide-band Directional LPDA Antennas ATW-A410P
1 ATW-B80WB Pair of In-Line RF boosters 470-990MHz
4 AC25 25'/7.6m RG8 Antenna Cable AC12, AC50, AC100

36 - audio-technica wireless systems guide

 APPLICATION 6 / WIRELESS SYSTEMS

ATW-A49

AN TE NNA AN TE NNA

AT W- B 80 WB AT W- B 80 WB
IN-LINE AMPLIFIER IN-LINE AMPLIFIE R

ATW-B80WB
RECEIVER RECEIVER

ATW-DA49a

Channels 5-8

Channels 1-4 Channels 9-12

Channels 13-16
*for 4-channel wiring see Application 4

Equipment used
ATW-A49 ATW-B80WB

5 x ATW-DA49a
AN TE NN A AN TE NN A

AT W- B 80 WB AT W- B 80 WB
IN-LINE AMPLIFIE R IN-LINE AMPLIFIE R

RECEIVE R RECEIVER

16 x ATW-R3210 ATW-T3201 ATW-T3202

16 x or

audio-technica wireless systems guide - 37

WIRELESS SYSTEMS / APPLICATION 7

16-channel wireless system using daisy chain

If you require significant UHF flexibility for touring or are simply in need of a reliable wireless system with exceptional
audio quality, the 5000 Series is ideal. Here the 5000 Series is used to achieve a 16-way system. This type of setup is
commonly found in music festivals, touring rigs, or in smaller installations for theatre, sports and conferencing.
This is an alternative option to Application 6, consider both systems to determine which better suits the requirements.

Based around the 5000 Series, the key to this solution is the powerful antenna distribution amplifier built into
the ATW-R5220 Dual Receiver. As seen in the diagram, the ATW-A49 antennas connect directly to the receivers
without the need to pass through any external distribution units. Each ATW-R5220 then passes the RF signal
along to the next receiver in a daisy-chain configuration. With this, up to eight dual-channel receivers can be
combined in a simple and efficient way, providing 16 channels of wireless audio.
Pay special attention to the cable run in the diagram. The first antenna signal has been connected to the first
receiver, passing down to the eighth receiver; meanwhile, the second antenna signal starts at the eighth receiver
and works upwards. This method affords a degree of redundancy, as should any one receiver lose power the
remaining units will continue to receive RF signal from at least one antenna.
Refer to the notes in Application 1 for advice on specifying cable length, active antennas and boosters
in the cable run.
This Application can be combined with Application 2 and is essential to Application 8.
The compatible Audio-Technica wireless system for this solution is the 5000 Series.

Product table
Quantity Code Description Alternative
8 ATW-R5220DAN 5000 Series Dual Channel Receiver with Dante® ATW-R5220
16 ATW-T5201 5000 Series Beltpack Transmitter ATW-T5202 Handheld Transmitter
1 ATW-A49 Pair of UHF Wide-band Directional LPDA Antennas
1 ATW-B80WB Pair of In-Line RF boosters 470-990MHz
4 AC25 25'/7.6m RG8 Antenna Cable AC12, AC50, AC100

38 - audio-technica wireless systems guide

 APPLICATION 7 / WIRELESS SYSTEMS

ATW-A49

AN TE NNA AN TE NNA

AT W- B 80 WB AT W- B 80 WB
IN-LINE AMPLIFIER IN-LINE AMPLIFIE R

ATW-B80WB
RECEIVER RECEIVER

ATW-R5220DAN

Equipment used
ATW-A49 ATW-B80WB
8 x ATW-R5220 / ATW-R5220DAN
AN TE NNA AN TE NN A

AT W- B 80 WB AT W- B 80 WB
IN-LINE AMPLIFIE R IN-LINE AMPLIFIE R

RECEIVER RECEIVE R

ATW-T5201 ATW-T5202

16 x or

audio-technica wireless systems guide - 39

WIRELESS SYSTEMS / APPLICATION 8

64-channel wireless system / 256-channel wireless system

This system is designed for large scale wireless audio projects, as found in theatre, opera, TV & sports
broadcasting, music festivals or any application where high numbers of wireless systems are essential
requirements.

This solution begins with the 16-way system shown in Application 7. Having constructed racks of eight dual
receivers, one ATW-DA49a UHF Antenna Distribution System can be added. This should be placed after the
antennas and linked to up to four of the 16-way racks, allowing for 64 simultaneous wireless audio channels.
Is 64-channels the limit? If more than 64-channels are required, the system can be considered as one “module”,
and more can be added. Up to four 64-channel modules can then connect to one final ATW-DA49a, opening
the possibility for a 256-channel wireless solution – all operating with just one pair of antennas.
Refer to the notes in Application 1 for advice on specifying cable length, active antennas and boosters
in the cable run.
This Application can also combine with Application 2 and relies on Application 7.
The compatible Audio-Technica wireless system for this solution is the 5000 Series.

Product table
Quantity Code Description Alternative
32 ATW-R5220DAN 5000 Series Dual Channel Receiver with Dante® ATW-R5220
64 ATW-T5201 5000 Series Beltpack Transmitter ATW-T5202 Handheld Transmitter
1 ATW-DA49a UHF Antenna Distribution System
1 ATW-A49 Pair of UHF Wide-band Directional LPDA Antennas
1 ATW-B80WB Pair of In-Line RF boosters 470-990MHz
4 AC25 25’/7.6m RG8 Antenna Cable AC12, AC50, AC100

40 - audio-technica wireless systems guide

 APPLICATION 8 / WIRELESS SYSTEMS

ATW-A49

AN TE NNA AN TE NNA

AT W- B 80 WB AT W- B 80 WB
IN-LINE AMPLIFIER IN-LINE AMPLIFIE R

ATW-B80WB
RECEIVER RECEIVER

ATW-DA49a

ATW-R5220DAN

audio-technica wireless systems guide - 41

42
478
486
494
502
510
518
526
534
542
550
558
566
574
582
590
598
606
614
622
630
638
646
654
662
670
678
686
694
702
710
718
726
734
742
750
758
766
774
782
786
789
791
821
823
826
832
862
863
865

Frequency

-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-

range

470
478
486
494
502
510
518
526
534
542
550
558
566
574
582
590
598
606
614
622
630
638
646
654
662
670
678
686
694
702
710
718
726
734
742
750
758
766
774
782
786
789
791
821
823
826
832
862
863

Country
Austria AT L L L L L L L L L L L L L L L L L L L L L L L L L L L L - - - - - - - - - - - - - - - - LP2c L - - P1

- audio-technica wireless systems guide

Belgium BE L L L L L L + L + L L L L L L L L L L L L L L L L L L L - - - - - - - - - - - - - - - - P2d + - - P1

Bulgaria BG + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - + + - - P1

Croatia HR + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - P2a + - - P1

Cyprus CY + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - P2d + - - P1

Czech Republic CZ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + P12 - - - P2a + - - P1

Denmark DK P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 - - - P1 P1 - - P1

Estonia EE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + P12 - - - P2d + - - P1

Finland FI - + - + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - + + - - P1

France FR + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - P1 + - - P1

Germany DE L L L L L L L L L L L L L L L L L - L L L L L L L L L L L L L L L L L L L L L - - - - - + + - - P1

Greece GR x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 - - - - - - - - - - - - - - - - P2d + - - P1

Hungary HU + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + P12 - - - P2a + - - P1

Ireland IE L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L - - - - LP2c L - - P1

Italy IT L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L P12 - - - + + - - P1

Latvia LV L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L - - - - L L - - P1

Lithuania LT L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L - - - - LP2a L - - P1

Luxembourg LU + + + + + + + + + + + + + + + + + L + + + + + + + + + + + + + + + + + + + + + + - - - - P2d + - - P1

Malta MT x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 x3 - - - - x3 x3 - - P1

Netherlands NL + + + + + + + + + + + + + + + + + L + + + + + + + + + + - - - - - - - - - - - - - - - - + + - - P1

Poland PL + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + P12 - - - + - - P1

Portugal PT L L L L L L L L L L L L L L L L L - L L L L L L L L L L L L L L L L L L L L L L - - - - + + - - P1

Romania RO + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - P2a + - - P1

Slovakia SK + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - P2a + - - P1
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + P12 - - - P2a + - - P1
WIRELESS SYSTEMS / RADIO EQUIPMENT DIRECTIVE (RED) - RESTRICTIONS

Slovenia SI
Spain ES + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - + + - - inP1

Sweden SE L L L L L L L L L L L L L L L L L L L L L L L L L L L L - - - - - - - - - - - - - - - - P1a P1a - - P1

United Kingdom GB LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a LP1a - - - - - - - - - - - - - - - - LP1a LP1a - - P1

Iceland IS L L L L L L L L L L L L L L L L L L L L L L L L L L L L - - - - - - - - - - - - - - - - + + - - P1

Norway NO - - - - - x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 - - - - - - - - - - - - - - - - + + - - P1

Liechtenstein LI + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - P12 + - - P1

Switzerland CH + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - P12 + - - P1

Please check local regulations for the latest information about usage of wireless microphones, Моля проверете местните разпоредби за последната актуална информация относно използването на безжични микрофони., Za najnovije
informacije o korištenju bežičnih mikrofona provjerite lokalne propise, Zkontroluj místní nařízení týkající se nejnovějších informací o použití bezdrátových mikrofonů, prosím, Undersøg venligst lokale regulativer for nyeste information omkring
brug af trådløse mikrofoner., Palun kontrollige kohalikke tingimusi uusima informatsiooni saamiseks raadiomikrofonide kasutamise kohta, Tarkista aina paikallisista määräyksistä uusimmat tiedot langattomien mikrofonien käytöstä., Merci de
consulter les dernières informations sur l’usage des microphones sans fil dans votre région., Bitte überprüfen Sie vor dem Einschalten die aktuellen Richtlinien zur Nutzung von Funkmikrofonen., Παρακαλώ οπως συμβουλευτειτε την τοπική
αρχή διαχείρισης, (η τους εκαστοτε κανονισμούς) οσoν αφορά την τελευταία πληροφόρηση για την χρήση των ασυρμάτων μικροφώνων, Kérjük tájékozódjon a rádiómikrofonok használatára vonatkozó legfrissebb helyi rendelkezésekről,
Seiceáil le do thoil rialáil áitiúil don eolas is déanaí faoi úsáid na micreafóin gan sreang, Controllate i regolamenti locali per le informazioni aggiornate sull'uso dei radiomicrofoni., Lūdzu pārbaudiet vietējos noteikumus par jaunako informāciju
sakarā ar radio mikrofonu izmantošanu, Prašome pasitikrinti vietinius teisės aktus dėl naujausios informacijos apie belaidžių mikrofonų naudojimą., Jekk joghgbok iccekkja r-regolamenti lokali dwar l-ahhar informazjoni fuq l-uzu ta’ “wireless
microphones", Raadpleeg, alstublieft, de meest actuele lokale informatie over het gebruik van draadloze microfoons., Proszę o sprawdzenie najnowszych informacji dotyczących lokalnych przepisów użytkowania mikrofonów bezprzewodowych,
Por gentileza, consulte a regulamentação local para obter as informações mais recentes sobre o uso de microfones sem fio, Vă rugăm să verificați reglementările în vigoare din zona dumneavoastră pentru a fi la curent cu cele mai recente
informații cu privire la folosirea microfoanelor wireless, Skontrolujte prosím miestne nariadenie týkajúce sa najnovších informácií o použitie bezdrotových mikrofónov., Za najnovejše informacije o uporabi brezžičnih mikrofonov preverite
01.01.2020 lokalne uredbe , Consulte su normativa local para obtener la información más reciente sobre el uso de micrófonos inalámbricos., Vänligen kontrollera lokala föreskrifter för den senaste informationen om användning av trådlösa mikrofoner,
Vinsamlegast kynnið ykkur nýjustu reglur um notkun þráðlausra hljóðnema, Vær vennlig å sjekke lokalt regelverk for informasjon om bruk av trådløse mikrofoner.
 RADIO EQUIPMENT DIRECTIVE (RED) - RESTRICTIONS / WIRELESS SYSTEMS

OK to use - licensefree, Може да се използва - Безплатен лиценз, U redu za korištenje - Bez licence, Bez omezení - Bez licence, Ok at bruge -
Licens Fri, Sobilik kasutada - litsensivaba, Käytettävissä - Lisenssivapaa, Usage autorisé - Licence libre, Zur Nutzung freigegeben - Lizenzfrei,
Επιτρεπτή Χρήση - Χρήση Ανευ άδειας, Használható - Díjmentes, OK a úsáid - ceadúnas saor in aisce, OK utilizzo - Senza licenza, Var izmantot -

+ Licence nav nepieciešama, Leidžiama naudoti - Nelicenzijuojamas, Huwa permess li jintuza - Mhemmx bzonn licenzja, Gebruik toegestaan -
Vergunningsvrij, wolno używać - nie wymagana licencja, Ok para usar - Licença livre, Se poate folosi - Nu necesită licență, Bez obmedzenia - Bez
licencie, Lahko se uporablja - Brez licence, Ok para usar - Licencia libre, OK att använda - Undantag från tillståndsplikt, lagi að nota - Má nota án
leyfis, Kan benyttes - Lisensfri

License needed, Платен лиценз, Licenca potrebna, Nutná licence, Licens påkrævet, Litsents vajalik, Lisenssi tarvitaan , Licence nécessaire, Lizenz-
und Anmeldepflichtig, Με Χρήση άδειας, Licenc köteles, Ceadúnas ag teastáil, Licenza necessaria, Licence ir nepieciešama, Licenzijuojamas,
L Hemm bzonn licenzja, vergunningsplichtig, wymagana licencja, Licença necessária, Necesită licență, Nutná licencia, Licenca potrebna, Licencia
necesaria, Tillstånd krävs, Þarfnast leyfis fyrir notkun, Lisens nødvendig

Indoor only, Само за вътрешно използване, Samo u zatvorenom prostoru, Pouze pro indoor, Kun indendørs, Ainult siseruumides, Vain
sisäkäyttöön , Intérieur uniquement, Nur in geschlossenen Räumen, Χρήση ΜΟΝΟ σε Εσωτερικούς Χώρους, Csak beltérben, Dhíon ach, Solo uso
in al chiuso, Tikai iekštelpās, Naudojimui tik patalpoje, Gewwa biss, Alleen in gesloten ruimte, tylko w pomieszczeniach, Somente uso interior,
Doar pentru interior, Iba pre indoor, Samo v zaprtem prostoru, Sólo en interiores, Endast inomhus, Aðeins innandyra notkun, Kun innendørs

Not allowed to use, Не се разрешава използването, Korištenje nije dopušteno, Zakázáno používat, Ikke tilladt at bruge, Ei ole lubatud kasutada,
Käyttö ei sallittu , Ne pas utiliser, Nutzung verboten, Μη Επιτρεπτή Χρήση, Tilos használni, Ní cheadaítear a úsáid, Uso non permesso, Nedrīkst
- izmantot, Neleidžiama naudoti, Mhux permess li jintuza, Gebruik niet toegestaan, nie wolno używać, Não é permitido usar, Nu este permisă
folosirea, Zakázané používať, Uporaba ni dovoljena, No se permite el uso, Inte tillåtet att användas, Má ekki nota, Ikke tillatt

P1 P1a P1b P12 P2 P2a P2b P2c P2d

Power limit, Лимит на мощността, Granice snage, Max. výstupní výkon, Sendestyrke maksimalt, Võimsuse limiit, Lähetystehorajoitus, Puissance
limitée à, Max. Sendeleistung, Επιτρεπτό Οριο ισχύος μεχρι, Teljesítmény korlát, Teorainn power, Limite di potenza , Jaudas robežvērtība, Galios
apribojimas, Sahha limitata sa, Maximaal zendvermogen, limit mocy , Limite de potência , Limita puterii, Max. výstupný výkon, Jakostna
omejitev, Potencia limitada a, MAX, Afl takmörkun , Maksimalt tillatt utstrålt effekt

10 mW 10 mW 20 mW 20 mW 20 mW 20 mW
ERP EIRP ERP EIRP ERP EIRP

10 mW 12 mW 20 mW
ERP ERP ERP

50 mW 50 mW 50 mW 50 mW 100 mW 100 mW
ERP EIRP ERP EIRP ERP EIRP

Vær vennlig å sjekke på http://www.finnsenderen.no/traadlos hvilke frekvenser som kan benyttes i ditt område.
x1 NO Please check on http://www.finnsenderen.no/traadlos which frequencies can be used in your area.

Εξαίρεση για μεμονωμένη/ανεξάρτητη άδεια χρήσης, και για συσκευές ισχύος εκπομπής μεχρι 10 mW. Εξαίρεση για

x2 GR μεμονωμένη/ανεξάρτητη άδεια χρήσης, και για συσκευές ισχύος εκπομπής μεγαλύτερης απο 10 mW
Exemption for individual licensing for devices with power of up to 10mW. Individual licensing required for devices with power over 10mW.

Jekk joghgbok iccekkja r-regolamenti lokali dwar l-ahhar informazjoni fuq l-uzu ta’ “wireless microphones"
x3 MT Please check local regulations for the latest information about usage of wireless microphones.

audio-technica wireless systems guide - 43

 Audio-Technica UK Audio-Technica Germany Audio-Technica France
Audio-Technica Ltd. Audio-Technica Deutschland GmbH Audio-Technica SAS
Technica House Peter-Sander-Str. 43 C 130, rue Victor Hugo
Unit 5, Millennium Way D-55252 Mainz-Kastel 92300 Levallois-Perret
Leeds, LS11 5AL Germany France
England
T: +44 (0)113 277 1441 T: +49 (0) 6134 25734 0 T: +33 (0) 1 43 72 82 82
F: +44 (0)113 270 4836 F: +49 (0) 6134 25734 50 F: +33 (0) 1 43 72 60 70
E: [email protected] E: [email protected] E: [email protected]
eu.audio-technica.com www.audio-technica.de www.audio-technica.fr

Audio-Technica Spain Audio-Technica Central Europe Audio-Technica Benelux

Audio-Technica Iberia SAU Audio-Technica Central Europe Ltd. incorporating Iemke Roos Audio
Oficina Barcelona: Montserrat Roig 13 H-1107 Budapest Audio-Technica Benelux B.V.
08908 L’Hospitalet de Llobregat Fogadó u. 3. Kuiperbergweg 20
Barcelona, Spain Hungary 1101 AG Amsterdam
T: +34 935 222 450 The Netherlands

Oficina Madrid: Fresadores 35 T: +36 1 433 34 08

28939 Arroyomolinos, Madrid, Spain F: +36 1 431 90 06 T: + 31 20 6972121
T: +34 913 619 081
E: [email protected] E: [email protected] E: [email protected]
www.audio-technica.es www.audio-technica.hu www.audio-technica.nl

L00096ENG - V1.0

©2020 Audio-Technica Ltd

E&OE*: Published specifications may be subject to change without notice.
(*Errors and Omissions Excepted)