Model

G6-42A
T el eh a n d l e r

Performance Axles Accessories & Options

Trunnion mounted planetary 55° steer axles.
Rated Capacity Integral steer cylinder. Enclosed Cab
At 24 in. (610 mm) load center, High bias limited slip differential on Air Conditioning
6,600 lb (2,994 kg) front axle. Auxiliary Electrics
Maximum Lift Height Service Brakes Arctic Package
42 ft (12.8 m) Inboard wet disc brakes on front axle. Cold Weather Package
Frame Leveling Work Lights
Parking Brakes Road Lights
10 degrees Wet disc spring-applied hydraulic release. Rotating Beacon
Lift Speed (boom retracted) Light on dash indicates when brake is on. Pintle Hook
Up: 14 sec
Down: 10 sec Tires Brick Guard
Standard: 13:00 x 24 — 12PR, G2 type. Fenders
Boom Speed Tires
Extend: 20 sec Cab
Certified ROPS/FOPS structure, adjustable Foam-Filled
Retract: 8 sec
seat and horn. Rock
Travel Speed Forward
19.5 mph (31.4 kmph) Forward, neutral, reverse lever on left of Solid
steering column.
Drawbar Pull (loaded)
18,000 lb (8,165 kg) Steering 4-Wheel Attachments
Operating Weight with 50" carriage and forks Power steering with manual backup.
20,300 lb (9,208 kg) Operator selectable 4-wheel circle, 4-wheel Standard Carriage
crab, 2-wheel front. 50 in. (1.3 m) or 60 in. (1.5 m) or 72 in. (1.8 m)
Standard Specifications Instruments
Volt meter, hourmeter, engine oil pressure
Side-Tilt Carriage
50 in. (1.3 m) or 60 in. (1.5 m) or 72 in. (1.8 m)
gauge, fuel gauge, water temperature gauge. Swing Carriage
Engine
All gauges protected by clear acrylic cover. 72 in. (1.8 m); 90 degrees
Make and Model John Deere 4045TF150
Fuel No. 2 Diesel Controls Sheet Material Adapter
Cycles 4 Grouped for operator comfort and convenience. Tower
No. of Cylinders 4 Boom lift and telescope on single joystick. 8 ft (2.4 m); 50 in. (1.3 m) Standard or
Displacement 276 cu in (4.5 L) Right-hand tilt and sway lever. Side-tilt Carriage*
Rated Speed 2,500 rpm Foot throttle. Pallet Forks
Max. Gross BHP 99 hp (74 kW) Hydraulic System-Implement 2.36 x 4 x 48 in. (60 mm x 102 mm x 1.2 m)
Single-section gear pump. 2.36 x 5 x 48 in. (60 mm x 127 mm x 1.2 m)
Fuel Tank 38 gal (141 L) 2.00 x 6 x 72 in. (51 mm x 152 mm x 1.8 m)
40 gal (151.4 L) system capacity.
Engine Filters Lumber Forks
Two-stage dry air cleaner — centrifugal 8 micron filter with visual service indicator 1.75 x 7 x 60 in. (44 mm x 178 mm x 1.5 m)
pre-cleaner with continuous dust ejector and suction strainer. 2.36 x 6 x 60 in. (60 mm x 152 mm x 1.5 m)
and replaceable dry filter element. Lift, crowd, tilt, telescope and sway
cylinders have holding valves intended Cubing Forks
Visual service indicator. 2 x 2 x 48 in. (51 mm x 51 mm x 1.2 m)
to prevent dropping of load in the event
Replaceable element-type fuel filter/water of hose failure. Material Bucket
separator. Full-flow replaceable-element 72 in. (1.8 m), 1.0 cu yd (0.76 m3)
engine oil filter. Auxillary Hydraulics 96 in. (2.4 m), 1.5 cu yd (1.15 m3)
Electrical System 102 in. (2.6 m), 2.0 cu yd (1.53 m3)
Voltage: 12V Grapple Bucket
Alternator: 63 amp 96 in. (2.4 m), 1.75 cu yd (1.34 cu m)
Battery: 810 cold cranking amps at 0°F Truss Boom
12 ft (3.7 m), 2,000 lb (907 kg) capacity
Transmission 15 ft (4.6 m), 2,000 lb (907 kg) capacity
Powershift with torque converter. 12 ft (3.7 m) with winch,
4-speed forward and 3-speed reverse. 2,000 lb (907 kg) capacity
Neutral start switch (park brake must also Fork Mounted Work Platform
be engaged to start). 8 ft (2.4 m), 1,000 lb (455 kg) capacity
Full time 4-wheel drive. Lifting Hook
Directional and gear change control on single *Requires auxiliary electrics
steering column mounted lever.
 Model

G6-42A
T el eh a n d l e r

32 ft 28 ft 24 ft 20 ft 16 ft 12 ft 8 ft 4 ft 0 ft
48 ft (14.6 m) Dimensions
Length (less forks) 212.6 in. (5.40 m)
44 ft (13.4 m) 70°
Width 95.5 in. (2.41 m)
40 ft (12.2 m) 60° Height 94 in. (2.38 m)
6 Wheelbase 128 in. (3.25 m)
36 ft (11.0 m) 50° 5 Ground Clearance 16.4 in. (416 mm)
Outside Turning Radius 144 in. (3.65 m)
32 ft (9.8 m) 4 Max. Reach from Front Tires to
40° 3 24 in. (609 mm) Load Center 29 ft (8.83 m)

6,600 lb (2,994 kg)

28 ft (8.5 m) 6,000 lb (2,722 kg)
2
24 ft (7.3 m) 30°
5,000 lb (2,268 kg)

1
4,000 lb (1,814 kg)

20 ft (6.1 m)

20°
3,000 lb (1,361 kg)

16 ft (4.9 m)
2,000 lb (907 kg)

12 ft (3.7 m)
10°
1,000 lb (454 kg)

8 ft (2.4 m)

4 ft (1.2 m)
0°
0 ft (0 m)

-4 ft (-1.2 m) -9° IMPORTANT

Rated lift capacities shown are with machine
-8 ft (-2.4 m) equipped with carriage and pallet forks. The
machine must be level on a firm surface with
undamaged, properly inflated tires. Machine
specifications and stability are based on rated lift
capacities at specific boom angles and boom
lengths. (If specifications are critical, the proposed
application should be discussed with your dealer.)
DO NOT exceed rated lift capacity loads, as unstable
and dangerous machine conditions will result.
DO NOT tip the machine forward to determine the
allowable load.
Use only JLG approved attachments with proper
material handler model/attachment load capacity
charts displayed in the operator’s cab. OSHA
requires all rough terrain forklift operators be
trained according to OSHA 29 CFR 1910.178 (1).

JLG Industries, Inc.

1 JLG Drive
Due to continuous product improvements, McConnellsburg, PA 17233-9533
JLG Industries reserves the right to make Telephone 717-485-5161
specification and/or equipment changes Toll-free in US 877-JLG-LIFT
without prior notification. This machine meets
Form No.: SS-G642A-0104-15M Fax 717-485-6417
Part No.: 3132207 www.jlg.com
or exceeds ASME B56.6-2002 as originally R070904
manufactured for intended applications. Printed in USA An Oshkosh Corporation Company