Ahmed Adel Mohamed Abdallah
Education:
2018 Bachelor of Engineering, Faculty of Engineering, Ain Shams University (ASU)
Department: Mechanical Engineering Major: Power Grade: Good (73%)
Graduation Project: NOx emissions reduction in a Biodiesel four-stroke engine
using exhaust gas recirculation (EGR)
Experience:
March 2023 – Now
Mechanical Maintenance Team Leader, GASTEC, Cairo, Egypt
Responsible for planning and execution of PM plans of 94 compressed
natural gas (CNG) stations including reciprocating gas compressors,
natural gas engines and attached utilities (air compressor, water
pumps, heat exchangers)
Lead and provide training and support for a team of 4 engineers and 26
technicians and utilizing other resources to ensure maximum workflow
efficiency and output results quality.
Continuously tracking stations’ KPIs including (MTTR, MMBF, PM
compliance, maintenance cost per gas sales) and taking actions to
improve them.
Managing monthly maintenance budget of 60K EGP to cover modification
trials, urgent repair procedures and special tools.
Supervise the condition monitoring program and periodically analyze the
data and insert new parameters in the SCADA system to improve live
monitoring.
Participate in SAP establishment program by providing all necessary
data for all maintenance related modules.
Selecting the suitable compressor for new stations and supervise the
installation and commissioning of fully operating CNG units.
July 2020 – March 2023
Mechanical Maintenance Engineer, GASTEC, Cairo, Egypt
Execution of PM plans of 19 compressed natural gas (CNG) stations
including reciprocating gas compressors, natural gas engines and
attached utilities (air compressor, water pumps, heat exchangers)
Leading and directing a team of 7 technicians and utilizing other
resources to ensure maximum workflow efficiency and output results
quality.
Managing monthly maintenance budget of 20K EGP to cover modification
trials, urgent repair procedures or special tools.
Plan and execution of periodic vibration and digital thermographic
measurements to continuously monitor the health of the compressors.
Perform root cause failure analysis (RCFA) to prevent future failures
and improve reliability of the stations and apply design modifications if
necessary.
Regularly monitor spare parts availability and provide charts with parts
consumption and criticality to improve inventory costs.
Worked on several process modifications and design projects using MATLAB
and
SolidWorks.
Designed new spare parts to be manufactured locally due to shortage in
imported parts.
November 2018 – July
2020
HVAC Design and VRF Application Engineer, Tiba Manzalawi Group, Cairo,
Egypt
Estimated thermal loads and ventilation, duct sizes and fans selection using
(HAP,
Elite)
Discussed with clients the Selection of the suitable HVAC system
among different systems (package unit, chilled water, VRF).
Presented features of VRF system to clients and provided after sales
technical support.
Prepared BOQ sheets for tendering, design and shop drawings for VRF
systems then full reports necessary for installation onsite.
Worked on big project (Salman University – Sinai, Military Kayan,
Masa Hotel, Ministers district – New Administrative Capital, dozen
residential projects)
Fall 2018 Intern, Industrial Engineer, Supplier Development, Electrolux, Cairo, Egypt
Gained exposure to the concepts of lean manufacturing.
Performed a line balance activity.
Identified waste and troubles with the suppliers and developed action plans.
Improved 5s, visual factory, SMED and OEE
Training Courses:
2023 Vibration Analysis Level II, NATCOM,
Egypt 5 days training including a field
day.
Attended technical training covering main vibration CAT II topics
including vibration spectra, time waveforms, envelope (demodulation),
and phase measurements.
Learned how to diagnose a wide range of fault conditions: unbalance,
eccentricity, misalignment, bent shaft, cocked bearing, looseness, rolling
element bearings faults, journal bearing faults, gearbox faults, resonance,
and other conditions.
Learned to balance and align a machine and correct a resonance condition.
2022 Project planning and scheduling using Primavera, Enppi, Egypt
Attended sessions that covered project management fundamental, project
planning and scheduling.
Learned about schedule development, planning, progress reporting and
performance analysis.
Applied the knowledge to two real life EPC project.
2018 Employability Skills Training, Employability and Career Development Center,
ASU 4 days training program funded by ASU.
Received experimental training covering areas of self-awareness,
communication, leadership, and team building.
Delivered a presentation about change management with a team of 7.
Extracurricular Activities:
2017 Formula I-Academy sessions, ASU Racing Team, ASU
Attended 7 sessions about formula car.
Gained fair knowledge about modern car
systems. 2006 – 2016 Volleyball player, Aviation Club, Cairo
Won six medals in different tournaments.
Skills:
Language: Good command of written and spoken Arabic and English
Computer: Microsoft office, good command of HAP, Elite, SOLIDWORKS, AutoCAD and MATLAB
