Preliminary Technical Product Information
Revision: 2024_10_01, 09:33
Page 1/2
BECHEM Staroil NO 46
Part–No. 15100223 / 0801802
Hydraulic oil
Product description
BECHEM Staroil NO 46 is a hydraulic oil with high thermal Properties
stability and oxidation resistance, which is suitable for the • High thermal stability and oxidation resistance
application in hydraulic systems of mobile and stationary • Excellent wear and corrosion protection
machines. It convinces by excellent wear and corrosion • Excellent viscosity-temperature behavior
protection. • Very good water and air release capacity
• Largely resistant to the formation of coke, mud or acid com-
Industries ponents
• Metalworking • Compatible with non-ferrous metals, mineral-oil resistant
• Paper industry seals, plastic materials and machine paints
• Very good filterability and centrifugation
Examples of application
• Hydraulic systems of mobile and stationary plants
• Compressed air maintenance units
Characteristic data
Type Unit Value Standard
Kinematic viscosity at 40 °C mm²/s 45 DIN 53000/ASTM D 7042
Kinematic viscosity at 100 °C mm²/s 7 DIN 53000/ASTM D 7042
Viscosity index 116 ASTM D2270
Density at 15 °C g/cm³ 0,864 DIN EN ISO 12185
Flash point °C 240 DIN ISO 2592
Pourpoint °C -30 ASTM D7346
FZG test A/8.3/90 – M Load stage 12 DIN ISO 14635–1
Instructions for use
Please read the safety data sheet prior to use to learn about
precautions and safety instructions. Always comply with the
applicable safety provisions and the intended use. You can
request a copy of the current safety data sheet using the
contact form on our website www.bechem.de/kontakt or by e-
mail to
[email protected].
CARL BECHEM GMBH · Weststr. 120 · 58089 Hagen · Germany
Phone +49 2331 935-0 · Fax +49 2331 935-1199 ·
[email protected] · www.bechem.com
Preliminary Technical Product Information
Revision: 2024_10_01, 09:33
Page 2/2
BECHEM Staroil NO 46
Part–No. 15100223 / 0801802
Hydraulic oil
Important notes
The information and technical data contained in this data sheet Please refer to the current safety data sheet for information
concerning the fields of application and processing for the product regarding: Hazardous material labelling, safety provisions, and
listed above are based on our knowledge and experience at the time regulations on storage and transport, and take any necessary
of printing. Unless otherwise stated, this information is provided precautions to protect property and persons.
solely for reference and does not constitute a specification or
warranty of quality in a particular instance. Many factors such as Because BECHEM products are subject to continuous development,
the relevant fields of application and the operating and working CARL BECHEM GMBH and its associated companies reserve the
conditions are beyond the control of BECHEM.For this reason, we right to make changes to the technical data in this data sheet at any
cannot guarantee the suitability of our products for a specific time.
purpose or application on the part of the customer. The delivery
of our products and our liability are subject exclusively to our Visible variations in the product color of each batch as well as
general sales and delivery conditions. These are available online changes in the color of delivered products are technically possible
at www.bechem.de/agb.html. and even probable for some products (for instance, due to the influ-
ence of temperature on raw materials). These processes are normal
Information regarding material compatibility is based on extensive and confirmed by BECHEM raw material suppliers. They have no
laboratory testing and literature references. Due to the large number impact on the serviceability, service life, and quality of the products.
of plastics used and their raw materials as well as the complex
chemical and morphological polymer structure, the indications BECHEM and BECHEM Rhusblüte are registered trademarks of
regarding compatibility are solely a reflection of general trends. CARL BECHEM GMBH. Logos, pictograms, and illustrations depicted
In order to ensure that the product is used correctly for individual in this data sheet are subject to copyright protection and may not
orders and particularly for serial production, we recommend that the be reproduced, modified, or disseminated without the express
supplier carries out its own trials and application tests in advance permission of BECHEM.
and confirms the compatibility of the product or carries out thorough
laboratory tests. For further information and more detailed product data, please
contact us at: [email protected] or [email protected].
Low foaming Hydraulic
CARL BECHEM GMBH · Weststr. 120 · 58089 Hagen · Germany
Phone +49 2331 935-0 · Fax +49 2331 935-1199 ·
[email protected] · www.bechem.com
