Scribd
Upload
32 views2 pages

TDS Ap 8a (In)

The document provides technical specifications for KRALASTIC AP-8A(IN), a type of ABS resin used in electroplating and logo emblem applications. It includes various properties such as melt flow index, impact strength, tensile strength, and thermal characteristics, along with their respective testing methods and conditions. The values are representative and not to be used as sales specifications, with a note on potential changes for quality improvements.

Uploaded by

TE B 44 Abhijeet Shelar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views2 pages

TDS Ap 8a (In)

The document provides technical specifications for KRALASTIC AP-8A(IN), a type of ABS resin used in electroplating and logo emblem applications. It includes various properties such as melt flow index, impact strength, tensile strength, and thermal characteristics, along with their respective testing methods and conditions. The values are representative and not to be used as sales specifications, with a note on potential changes for quality improvements.

Uploaded by

TE B 44 Abhijeet Shelar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

KRALASTIC | AP-8A(IN)

ASTM Property | BEPL

Resin Feature & Electroplating | Logo Emblem,


Applications Garnished Parts

Resin Type ABS

Property Measuring Method Condition Unit Value

Rheological

Melt Flow Index ASTM D-1238 at 220°C /10 kg gm/10min 30

Mechanical

Izod Impact Strength*, At 1/8" or 3.2mm and


ASTM D-256 Kgf.cm/cm 35
Notched 23°C
Izod Impact Strength*, At 1/4" or 6.4mm and
ASTM D-256 Kgf.cm/cm 30
Notched 23°C
Tensile Strength, Type I ASTM D-638 50mm/min Kgf/cm² 450
Flexural Strength* ASTM D-790 5 mm/min Kgf/cm² 560
Flexural Modulus* ASTM D-790 5 mm/min Kgf/cm² 18500
Rockwell Hardness* ASTM D-785 23°C R-Scale 105

Thermal

Heat Distortion at 18.56 Kgf/cm² (Un-


ASTM D-648 °C 85
Temperature, (Method A) annealed)

Physical

Specific Gravity** ASTM D-792 23°C - 1.05

Other Properties

Mould Shinkage** ASTM D-995 - % 0.4 -0.6


Note:

The values above are representative values of natural product and not to be used for mould designs.

The values above are not to be construed as sales specifications and implies no legal binding effect.

All properties except melt flow index are measured on injection moulded specimens.

Properties marked* shall be reported, only if explicitly committed or contracted.

Properties marked ** are values typical of ABS and are provided here solely for customer convenience.

The values provided in this document may be changed due to quality improvement of the product without any prior
notification.

Date, when last updated: 13/11/2020

You might also like