The next generation of
Blood and Fluid Warming
One of the contributing factors of unintended hypo- at all flow rates. Maintaining the right patient body tem-
thermia is the intravenous (IV) delivery of cold blood perature results in clinical and economic benefits by re-
and fluids, resulting in a reduction of the main body ducing the length of hospital stay and complications.4,5,6
temperature by 0.25ºC for every litre of IV crystalloid The 37Company has a complete Blood and Fluid
solution administered at room temp (21ºC) or with Warming portfolio that offers a safe and controlled
only 1 bag of blood (250 cc) at 5ºC.1,2,3 technology to consistently deliver warm blood and
Blood and Fluid Warming can help maintaining normo- IV fluids to patients undergoing surgical procedures
thermia and will contribute to a positive patient outcome from low to high flow.
by providing consistent normothermic blood and fluid
Fluido® Compact Fluido® Fluido®
AirGuard System
Solutions for Patient Warming
High Flow Warming System
Fluido® AirGuard System is a Blood and Fluid Warming system. It warms blood and IV fluids in only
30 seconds to the desired temperature. The system is suitable for all applications, from standard
to high flow.
The Fluido® AirGuard System consists of:
1. Blood and Fluid Warmer
2. Air Guard
3. Pressure Chambers
Fluido ®
4. Compressor
5. IV-Pole
Fluido® Pressure Chambers
500ml and 1000ml bags
Pressure Regulator (0-300mmHg)
Fluido® Air Guard Fluido® Blood and Fluid Warmer
Air Detection Cardiac Floating
Automatic Shut off Clamp Adjustable set temperature 30 - 39ºC
Cardiac Floating Flow & volume indicator
Fluido® IV-Pole
Integrated Air Tube
5 Castors with Brakes
Fluido® Compressor
Stable Design
Silent
Powerful
Cardiac Floating
1 Plug-in
2 Prepare
3 Power On
Fluido® AirGuard System
Fluido® Blood and Fluid Warmer | Article number 651230 - 651115
Voltage 220 - 240V~ 110 - 120V~
Frequency 50Hz 60Hz
Power 6A 12A
Fuses 2 x 8AHT/250V 2 x 15AHT/250V
Capacity 1400VA
Dimensions 387mm x 215mm x 255mm
Weight ± 9.5kg
Set temperature 30 – 39ºC (end of line)
Unit of temperature increase 1ºC
Classification (MDD 93/42/EEC) Class IIb
Classification (IEC 60601-1) Class I, Cardiac Floating
Classification (IEC 60529) IPX1
Fluido® Air Guard | Article number 660400 - 661400
Voltage 220 - 240V~ 110 - 120V~
Frequency 50/60Hz 60Hz
Current 0.1A 0.2A
Max. power 25VA 25VA
Dimensions 310mm x 150mm x 190mm
Weight ± 4.5kg
Classification (MDD 93/42/EEC) Class IIb
Classification (IEC 60601-1) Class I, Cardiac Floating
Classification (IEC 60529) IPX1
Fluido® Pressure Chambers | Article number 660300
Max. overpressure 300mmHg ± 10%
Dimensions 370mm x 400mm x 150mm
Weight ± 4.2kg
Classification (MDD 93/42/EEC) Class IIa
Fluido® Compressor | Article number 660200A
Voltage 100 - 240V~
Frequency 50/60Hz
Current 0.08 - 0.03A
Max. power 6 - 16VA
Air flow 3liter/min (unloaded)
Max. pressure 1.0bar/750mmHg
Dimensions 210mm x 150mm x 150mm
Weight ± 1.3kg
Classification (MDD 93/42/EEC) Class I
Classification (IEC 60601-1) Class II, Cardiac Floating
Classification (IEC 60529) IPX1
Fluido® IV-Pole | Article number 660500-B
Adjustable height 1914 - 2236mm
Dimensions Pole ø 38mm
Dimensions Base ø 630mm
Weight 13kg
Castors 5, anti-static, latex free, 5 brakes
Watch the Fluido® AirGuard System video
When administrating IV fluids under pressure, it is recommended using a
Safety reliable safety mechanism to avoid the risk for air embolism to the patient.
Speed The Fluido® AirGuard System is provided with an ultra-sonic sensor to
automatically shut off the IV-line in case air is detected in the bubble trap.
Control
The Fluido® System is warming blood and fluids with IR technology. It is a dry
method preventing from the risk of waterborne contamination. The Fluido®
disposable sets are interchangeable and move easily with the patient between
different Fluido® systems. This allows the caregiver to carry on warming while
conveying the patient through different wards with one single disposable and
reducing the risk of infection and eliminating additional cost.
Based on in line sensors the Fluido® Blood and Fluid Warmer calculates the
required energy to safely warm the perfusates. Algorithms compensate for the
heat loss in the patient line to ensure accurate heat adjustment against the set
temperature at the end of the line.
Fluido® Disposable Sets
Fluido® Standard Set | Article number 671200 b
a Manual air relief
b Patient line (1500mm)
Max. flow: 650ml/min7
a
Normothermic flow: 20- 400ml/min8
Priming volume: 90ml
Backflow valve
Fluido® Trauma Set | Article number 671500 c
b
a Manual air relief
b Patient line (1500mm) a
c Administration port
Max. flow: 800ml/min7
Normothermic flow: 20 - 750ml/min8
Filter: 200µm
Priming volume: 145ml
Backflow valve
Fluido® Trauma Plus Set | Article number 671700
c
a Manual air relief b
b Patient line (2000mm)
a
c Administration port
Max. flow: 1100ml/min7
Normothermic flow: 30 - 650ml/min8
Filter: 200µm
Priming volume: 155ml
Backflow valve
The Fluido® sets do not contain natural rubber latex.
Low/Moderate Flow Warming Device
Fluido® Compact is a low to moderate flow Blood and Fluid Warming
system. It is easy to use, safe and cost effective with an outstanding Fluido®
performance for daily use.
The Fluido® Compact combines ease of use with low long-lasting design. The 37Company recommends to
operational costs. The intuitive control panel can be conduct an electrical safety test and over temperature
operated with only a single button. The fluid will start alarm test once a year. The disposable sets move easily
warming to 39°C +/- 2°C. There are 2 disposable sets, with the patient between different systems. This allows
which allow the IV fluid to reach temperature in 30 seconds, the caregiver to warm IV fluids for the patient across
and consists of a cassette and patient line. It is an easy-to- departments with only one disposable without having to
use device to prevent inadvertent perioperative move the warming unit. The embedded software enables
hypothermia and improves patient’s outcome. The device maximum patient safety through multiple temperature
is maintenance free. The Fluido® Compact Blood and sensors and an independent safety control system. It
Fluid Warming system components have a durable and provides accurate and safe Blood and Fluid Warming.
“Prime, insert the set, switch on and the Fluido® Compact is ready to use”
Fluido® Compact System | Article number 650000
Containing Fluido® Compact Control Module & Fluido® Compact Warming Module
Fluido® Compact Control Module | Article number 650100
Dimensions 285mm x 120mm x 195mm
Weight < 1700g
Voltage 100 - 240V~ (50/60Hz)
Max. power 160W
Classification (IEC 60529) IPX1
Classification (IEC 60601-1) Class II, Body Floating
Classification (MDD 93/42/EEC) Class IIb
Fluido® Compact Warming Module | Article number 650200
Dimensions 165mm x 75mm x 50mm
Weight < 450g
Set point temperature 39°C ± 2°C
Classification (IEC 60529) IPX4
Classification (IEC 60601-1) Class II, Body Floating
Classification (MDD 93/42/EEC) Class IIb
Fluido® Compact Standard Set | Article number 672000
Priming volume 4ml (5ml with 300mmHg pressure)
Patient line 400mm
Max. flow 400ml/min7
Normothermic flow 5 - 100ml/min8 (300 - 6000ml/h)
Heat exchanger Parylene coated aluminum plate
Box quantity 120 (4 x 30 pieces)
Fluido® Compact Standard Set with drip chamber | Article number 672100
Priming volume 15ml (16ml with 300mmHg pressure)
Patient line 700mm
Max. flow 400ml/min7
Normothermic flow 15 - 100ml/min8 (900 - 6000ml/h)
Heat exchanger Parylene coated aluminum plate
Box quantity 60 (4 x 15 pieces)
The Fluido® Compact sets do not contain natural rubber latex.
Images shown may differ from the actual product
1 Sessler,D.,Mild perioperative hypothermia. N Engl J Med, June 1997, 336(24):1730-1737
2 Evans J.W, Singer M. , Coppinger S.W. et al., Cardiovascular performance and core temperature during transurethral postastectomu, J. Urol 1994, 152:2025-9
3 ECRI Report, Warming Units, Blood/Solution, December 2002
4 Luna G.K., et al., Incidence and Effect of Hypothermia in Seriously Injured Patients, The Journal of Trauma (1987)
5 Jurkovich G.J., Hall G.M., Hypothermia in trauma victims: An ominous predictor of survival, The Journal of Trauma (1987)
6 Kurz A., Sessler D., Lenhardt R., Perioperative normothermia to reduce the incidence of surgical-wound infection and shorten hospitalization. Study of Wound Infection and Temperature
Group, New England Journal of Medicine (1996) 334: 1209-15
7 Free flow with 300 mmHg
8 Incoming fluid temperature of 20ºC, normothermic flow between 36ºC and 37.5ºC
Virtual37 is a Temperature Management
Tool. This simulation tool offers an inno-
vative and easy way to understand the
impact of the warming balance and the
warming decisions taken in surgeries. The tool has been validated by University Hospital Ghent, Belgium.
The 37Company - Solutions for Patient Warming
Our core business is all about offering solutions for patient warming, about keeping patients at a constant healthy body temperature.
The 37Company is working with respected medical professionals to accomplish continuous innovation, improve patient outcome and to
reduce health care costs. This by providing training, education and economically justified, best-in-class products.
Fluido® and Mistral-Air® are registered trademarks of The Surgical Company International B.V. Other patents pending.
Fluido® products are covered by the following European patents: 1313521 and 1446179. Thermoflect® is a registered trademark of Encompass Group, LLC.
Mistral-Air Blankets Plus are covered by the following American patent: 12/342,933.
®
®
Fluido® Fluido® ®
www.the37company.com
The 37Company | Beeldschermweg 6F | 3821 AH Amersfoort © 2018 The Surgical Company Group
The Netherlands | T +31 (0) 33 450 72 50 | [email protected] INT/P032-EN/6-06/18
