GET Wear Plates & Protection
parts.cat.com/en/trakindo/get-wear-plates-protection
Home All Categories Ground Engaging Tools (GET) GET Wear Plates & Protection
395 EXCAVATOR
Serial: RNG10000
Specifications
Units of Measure
BOLT SPACING (MM)
INSIDE DIAMETER (MM)
THICKNESS (MM)
THREAD SIZE (DIA X PITCH) (MM)
138-0032: Mawps Wear Plate
1/36
Cat® 30 Series MAWPS Wear Plate
Rp427,875.00 (IDR)
138-6551: Bucket Heel Shroud
Cat® 41 mm x 178 mm Curved Weld-On Heel Shroud
Rp247,271.00 (IDR)
157-1027: Bucket Heel Shroud
Cat® 50 mm x 254 mm Curved Weld-On Heel Shroud
Rp6,565,640.00 (IDR)
2/36
138-0006: Mawps Retainer
Cat® 10 Series/20 Series/30 Series/40 Series Retainer
Rp6,565,640.00 (IDR)
From Jan 09 to 14
253-0066: Bucket Corner Guard
Cat® Bolt-On Corner Guard - RH
Rp1,232,932.00 (IDR)
From Jan 14 to 17
253-0067: Bucket Corner Guard
Cat® Bolt-On Corner Guard - LH
3/36
280-4088: Chocky Bar
Cat® 241 mm x 38 mm Chocky Bar
157-1019: Bucket Heel Shroud
Cat® 50 mm x 254 mm Straight Weld-On Heel Shroud
GET THE DETAILS
324-6151: Base Edge Shroud
Cat® 100 mm CapSure™ Shroud - LH
4/36
324-6147: Base Edge Shroud
Cat® 100 mm CapSure™ Shroud - RH
Rp7,017,639.00 (IDR)
From Jan 20 to 30
280-4091: Chocky Bar
Cat® 241 mm x 102 mm Chocky Bar
280-4099: Wear Block
Cat® 38 mm Wear Block
5/36
280-4089: Chocky Bar
Cat® 241 mm x 51 mm Chocky Bar
253-0065: Bucket Corner Guard
Cat® Bolt-On Corner Guard - LH
253-0064: Bucket Corner Guard
Cat® Bolt-On Corner Guard - RH
6/36
326-5216: Base Edge Shroud
Cat® 100 mm CapSure™ Shroud
280-4090: Chocky Bar
Cat® 241 mm x 64 mm Chocky Bar
304-5854: Sidebar Protector
Cat® 816 mm Straight CapSure™ Sidebar Protector - LH
7/36
280-4078: Bucket Heel Shroud
Cat® 25 mm x 119 mm Straight Weld-On Heel Shroud
Rp7,017,639.00 (IDR)
253-0062: Bucket Corner Guard
Cat® Bolt-On Corner Guard - RH
Rp7,017,639.00 (IDR)
253-0063: Bucket Corner Guard
Cat® Bolt-On Corner Guard - LH
8/36
280-4079: Bucket Heel Shroud
Cat® 25 mm x 119 mm Curved Weld-On Heel Shroud
280-4095: Bucket Wear Button
Cat® 35 mm Wear Button
302-5541: 74mm Inner Diameter Hitch Link Wear Pad
Cat® 74mm Inner Diameter Articulation Hitch Link Pivot Pin Plastic Wear Pad
9/36
253-0061: Bucket Corner Guard
Cat® Bolt-On Corner Guard - LH
Rp1,294,709.00 (IDR)
From Jan 08 to 20
253-0060: Bucket Corner Guard
Cat® Bolt-On Corner Guard - RH
Rp1,294,709.00 (IDR)
280-4093: Bucket Wear Button
Cat® 29 mm Wear Button
10/36
138-0030: Mawps Wear Plate Base
Cat® 30 Series MAWPS Wear Plate Base
438-4558: Bucket Heel Shroud
Cat® 99 mm x 244 mm Straight Weld-On PTA Heel Shroud
Rp3,034,245.00 (IDR)
494-8979: Chocky Bar
Cat® 241 mm x 25 mm Chocky Bar
11/36
280-4094: Bucket Wear Button
Cat® 33 mm Wear Button
280-4096: Roll Bar
Cat® 38 mm Roll Bar
Rp862,270.00 (IDR)
From Feb 11 to 21
474-1546: Wear Pad
Cat® Wear Pad (Boom Group)
12/36
280-4092: Bucket Wear Button
Cat® 22 mm Wear Button
280-4097: Roll Bar
Cat® 32 mm Roll Bar
Rp862,270.00 (IDR)
280-4098: Roll Bar
Cat® 69 mm Roll Bar
13/36
416-2026: Bucket Heel Shroud
Cat® 45 mm x 180 mm Curved Weld-On Heel Shroud
Rp6,565,640.00 (IDR)
474-1608: Wear Pad
Cat® Wear Pad (Boom Group)
Rp3,034,245.00 (IDR)
From Jan 02 to 07
474-1544: Wear Pad
Cat® Wear Pad (Boom Group)
14/36
474-1906: Wear Pad
Cat® Wear Pad (Boom Group)
345-8061: Bolt Saver
Cat® Bolt Saver
465-2006: Bucket Heel Shroud
Cat® 37 mm x 232 mm Straight MAWPS Heel Shroud
15/36
465-2009: Bucket Heel Shroud
Cat® 36 mm x 232 mm Straight MAWPS Heel Shroud
286-2126: Base Edge End Protector
Cat® 90 mm Base Edge End Protector (BEEP)
452-8503: Rock Deflector
Cat® 50 mm Rock Deflector
16/36
483-8264: Chocky Bar
Cat® 363 mm x 165 mm Chocky Bar
5H-8991: 177.8mm Long Final Drive Shaft
Cat® 177.8mm Long Final Drive Shaft for Track Roller and Recoil Spring
Rp7,539,728.00 (IDR)
From Jan 08 to 20
471-7016: BRACKET
Bent C-shaped Steel Mounting Plate with Holes
Rp305,462.00 (IDR)
From Feb 11 to 21
17/36
275-5465: Base Edge End Protector
Cat® 64 mm Base Edge End Protector (BEEP)
466-9895: Bucket Wear Block
Cat® Block used to protect the bucket from potential wear and damage during
excavation processes
286-2128: Wear Plate
Base Edge End Protection
18/36
271-8391: Base Edge End Protector
Cat® 70 mm Base Edge End Protector (BEEP)
450-3845: Base Edge End Protector
Cat® 100 mm Base Edge End Protector (BEEP)
121-2367: Corner Guard
Wheel Loader Corner Guard Left Hand
19/36
137-9697: Wear Block
Wear Protection
142-1508: Corner Guard
Wheel Loader Corner Guard
249-4884: Corner Guard LH
Wheel Loader Corner Guard
20/36
249-4885: Corner Guard RH
Wheel Loader Corner Guard
257-1792: Base Edge End Protector
Cat® 70 mm Base Edge End Protector (BEEP)
267-5460: 25mm Thick Bucket Bowl Wear Edge
Cat® Bucket Bowl Wear Edge endures abrasion, enhancing equipment durability and
performance in back-dragging, leveling, and scraping operations
21/36
268-0229: Corner Guard
Wheel Loader Corner Guard
268-0235: Corner Guard
Wheel Loader Corner Guard
275-5463: Base Edge End Protector
Cat® 70 mm Base Edge End Protector (BEEP)
22/36
275-5464: 30mm Thick Wear Block
Cat® Wear Block is placed in the edges of the buckets to avoid wear and tear of
bucket and adapter edges during the operations
275-5466: Base Edge End Protector
Cat® 64 mm Base Edge End Protector (BEEP)
275-5467: Base Edge End Protector
Cat® 70 mm Base Edge End Protector (BEEP)
23/36
275-5468: Cutting Edge Wear Block
Cat® 64 mm Base Edge End Protector (BEEP)
286-2127: Base Edge End Protector
Cat® 90 mm Base Edge End Protector (BEEP)
309-1076: Base Edge End Protector
Cat® 76 mm Base Edge End Protector (BEEP)
24/36
360-6008: PLATE-WEAR
360-6065: PLATE-WEAR
424-6890: BLOCK AS-WEA
25/36
432-5912: PLATE-WEAR
437-3059: Base Edge End Protector
Cat® 100 mm Base Edge End Protector (BEEP)
Rp3,111,507.00 (IDR)
From Jan 08 to 20
438-4559: Bucket Heel Shroud
Cat® 99 mm x 244 mm Straight Weld-On Heel Shroud
26/36
441-6131: Corner Guard
Wheel Loader Corner Guard
442-4062: BLOCK AS-WEA
448-9554: BLOCK-WEAR
27/36
466-9894: Rock Deflector
Cat® 50 mm Rock Deflector
466-9896: Rock Deflector
Cat® 50 mm Rock Deflector
469-5691: Base Edge End Protector
Cat® 120 mm Base Edge End Protector (BEEP)
28/36
474-0073: 40mm Thick Steel Wear Block
Cat® Steel Wear Block used in Bucket
476-3379: Base Edge End Protector
Cat® 140 mm Base Edge End Protector (BEEP)
476-7677: PAD-WEAR
Cat® Wear Pad
29/36
476-7680: PAD-WEAR
Cat® Wear Pad
494-8982: Wear Bar
Cat® 25 mm Wear Bar
494-8986: Wear Lug
Cat® 29 mm Wear Lug
30/36
494-8988: BLOCK AS-WEA
Cat® Wear Block (6"x8" Weld on Tile)
495-7758: PAD AS
Cat® Pad Assembly
540-4746: BLOCK AS-WEA
31/36
540-4747: BLOCK AS-WEA
540-7151: BLOCK AS-WEA
587-6970: Wear Plate
Weld-on Center Wear Plate
590-9585: 35mm Thick Bucket Outer Wear Plate
Cat® 35mm Thick Extreme Service Bucket Outer Weld On Steel Wear Plate provides
a durable surface that absorbs wear and tear during bucket operation
32/36
605-5349: Bucket Heel Shroud
Cat® 68 mm x 180 mm Curved Weld-On Heel Shroud
605-5350: Bucket Heel Shroud
Cat® 68 mm x 180 mm Curved Weld-On LWP Heel Shroud
605-5351: Bucket Heel Shroud
Cat® 115 mm x 250 mm Curved Weld-On Heel Shroud
33/36
605-5352: Bucket Heel Shroud
Cat® 115 mm x 250 mm Curved Weld-On Heel Shroud
614-3154: PLATE AS-SHR
624-1664: PLATE AS-SHR
34/36
636-6909: Mast Wear Pad Guide Plate
Cat® Mast Wear Pad Guide Plate helps ensure proper alignment between the mast
and the wear pads, reduces friction and binding, promoting smoother operation
6W-3468: Corner Guard
Wheel Loader Corner Guard
Showing 102 of 102
Key
Factory Fit
This part is designed to fit your Cat equipment based on the manufacturer’s
specifications.
Any changes to the manufacturer’s configuration might result in the product not fitting
your Cat equipment. Please consult your Cat Dealer before purchasing to ensure that this
part is appropriate for your Cat equipment in its current condition and assumed
configuration. This indicator cannot guarantee compatibility for all parts.
35/36
Remanufactured
Non-Returnable
Kit
Replaced
Not all wear protection is created equally. A patented
wear design, combined with proven retention and two-
minute install and removal make Cat’s Mechanically
Attached Wear Plate System the most cost-efficient
wear protection on the market. Match up the pass and
easily customize your buckets and truck beds with both
solid and skeletal MAWPS.
36/36
