WS-6926

USER’S MANUAL

USER’S MANUAL

Downloaded from www.Manualslib.com manuals search engine

 THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

3.3.4 Upgrade........................................................... 16
Table of Contents 3.4 System Setting....................................................18
3.4.1 Language...................................................18
1.GUIDE....................................................................... 01
3.4.2 Screen format............................................ 18
1.1 Important Safety Instructions............................ 01
3.4.3 Factory reset..............................................18
1.2 Unpacking......................................................... 02
3.4.4 Longitude & Latitude; Location &Hemisphere
1.3 PRODUCT OVERVIEW & ILLUSTRATION...... 02
..................................................................... 18
1.4 INSTALLATION OF METER............................. 05
3.4.5 Time Zone..................................................18
2.OUTLINE................................................................... 06
3.4.6 Channel reset.............................................18
3.THE MENU OSD INSTRUCTION.............................. 06
3.4.7 Mode, SW VER, Release Time..................19
3.1 Search............................................................... 07
4. Channel......................................................................19
3.1.1 Satellite.................................................... 07
4.1 Manager Channel............................................... 19
3.1.2 LNB type.................................................. 07
4.1.1 Rename Channel.......................................19
3.1.3 LOW FREQ / HIGH FREQ...................... 08
4.1.2 Del Channel............................................... 20
3.1.4 TP Num.................................................... 08
4.1.3 Lock Channel.............................................20
3.1.5 Frequency.................................................. 08
4.1.4 Skip Channel..............................................21
3.1.6 Symbrate................................................... 08
4.2 Favorite Manager.................................................21
3.1.7 Pol............................................................. 08
4.2.1Rename........................................................21
3.1.8 NIT Search............................................... 08
4.2.2Sort order..................................................... 22
3.1.9 LNB Power............................................... 08
4.2.3 Favorite set..................................................22
3.1.10 LNB 22KHZ............................................ 08
4.2.4Favorite Sort..................................................23
3.1.11 DisEqc type & Input............................... 09
4.2.5 TV/Radio......................................................23
3.1.12 Motor...................................................... 11
4.2.6 Sat sort.......................................................23
3.1.13 Unicable setting..................................... 10
4.3 EPG..................................................................... 24
3.1.0.1 Quick Search......................................... 11
4.4 Program List.........................................................25
3.2TP Manager........................................................ 13
4.5 Subtitle & Teletext................................................ 25
3.3 Multimedia......................................................... 13
5 Technical Specification..............................................26
3.3.1 MUSIC..................................................... 14
6 Trouble Shooting....................................................... 28
3.3.2 VIDEO..................................................... 15
3.3.3 PICTRUE................................................. 15

Downloaded from www.Manualslib.com manuals search engine

 THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

1.GUIDE 1.2 Unpacking Equipment

1.1 Important Safety Instructions Open the package and make sure it includes all below items, if
any is missing, please contact the reseller for replacement.
Thank you for choosing our product. Before installation,we
would like to remind you some notes, which is very important 1.Digital Satellite Meter
for operating safely and properly, as follows: 2.User’s manual
Be sure to read this user manual before starting your operation. 3.AV cable
You must install the dish with correct direction and angle. If 4.Car charger cable
the dish is not working properly, contact your local dealer. 5.Adaptor
When the unit is suddenly moved to a hot area from a cold 6.Silicone case
area, it may cause some problems. In that case, turn off the
power,and turn on again after 1-2 hours.
Keep meter placed in clean space with sufficient ventilation.
Do not cover the meter with or place it on a unit that emits heat. 1.3 Product Overview & Illustration
Clean the case by a soft cloth with a little washing liquid.
Do not remove the cover.
Do not let the unit exposed to extreme heat, cold or humid
conditions.
No liquids or any other materials to come inside of the unit.

Warning:All instructions are subject to the latest version

of software without prior notice if any new functions are
added to the equipment.

01-Digital Satellite Meter Digital Satellite Meter-02

Downloaded from www.Manualslib.com manuals search engine

 THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

9 Power Power indicator light

10 22KHZ 22Khz indicator light
11 Vertical /Horizontal polarization voltage
13V/18V output light
12 LOCK Signal lock indicator light
13 Charger (Note1) Charger indicator light
Show the main menu on the screen
14 MENU or jump back to previous menu in
sub-menu setting conditions
Escape from present menu and save
15 EXIT
the settings
16 F1 (Note 2) 1)Shows the Subtitle menu ;
2)TV/Radio switch
17 F2(Note 2) 1)Shows the EPG menu;
2)Audio select
F3(Note 2) 1)Shows the Favorite Manager menu;
18
2)lock beep alarm

19 1)Shows Manager Channel menu;

F4(Note 2) 2)TV system switch
20 NEVIGATION KEY Volume Control or move cursor,
channel or change, confirm etc
21 B.Light Display of LCD ON/OFF
NO Description FUNCTION 22 MUTE Enable or disable the audio output
1 LNB IN Connect to satellite antenna cable 23 TV/RADIO Switch between TV and Radio mode
2 Power witch Turn on/off meter 24 SCAN 'Quick Search' menu shortcut key
3 AV IN Connect to AV port for meter To display channel status or various
25 INFO program information of current channel
4 AV OUT Connect to AV port for TV
5 USB Port Connect to USB memory 26 USB menu shortcut key
6 DC Slot Connect to Adaptor Input 27 BEEP (Note 3) Sound Alarm for Locking Signal on/off
7 Speaker Speaker Integrated 28 0-9 Select channels or enter programming
8 LCD Screen Video display 29 (Note 4) When power on the meter ,
displays the battery level

03-Digital Satellite Meter Digital Satellite Meter-04

Downloaded from www.Manualslib.com manuals search engine

 THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

Note1:When the adapter insert dc slot,Charging indicator 2. OUTLINE

scintillation three times, then the indicator is often bright, 3.5 Inch High Definition TFT LCD Screen
when the batteries charged sufficient, the charge indicator is
Fully DVB-S/DVB-S2
going out.
H.264 Hardware decoding
Note2:Keeping the key over 1 s, it will be the (2) function, Digital meter for signal strength and quality
otherwise is the (1)function. Supports scan of Auto,Manual.
Note3:The Key only in menu'3.1.0.1 Quick Search'is effective. Sound and Light Alarm for Locking Signal
Note4:When the battery is on power failure, a voice alarm, pl- Speaker Integrated
ease a timely charge, do not continue to be used to avoid the Support both AV out and AV in
internal battery runs out and shorten the usage time. Ant short protect
PAL-NTSC auto-conversion
1.4 INSTALLATION OFMETER 8.4V/3000mAh Lion Battery Included
Software upgrade via USB port
Easy to carry

3. THE MENU OSD INSTRUCTION

If you have installed and connected the cables of the meter,
pressing MENU key to display the Main Menu.
Satellite Finding
System
Multimedia
TP Manage

Press the keys of ▲▼◄► to move the cursor up or down in

the menu interface, then use OK key to confirm a selection.

05-Digital Satellite Meter Digital Satellite Meter-06

Downloaded from www.Manualslib.com manuals search engine

 THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

3.1 Search 3.1.3LOW FREQ / HIGH FREQ:Using the numeric keys

or pressing ◄► keysenter the proper LNB frequency refe-
rring to your LNB.
3.1.4 TP Num:Press ◄►key into the TP list. Use ▲▼key to
move the cursor then press OK key to select the satellites
that you want.

3.1.5Frquency: Frequency of the current transport, Input

the value by using the numeric keys.
3.1.1Satellite: Press ◄►key enter the satellite list.Use 3.1.6Symbrate:Symbol rate of the current transport, Input
▲▼ key to move the cursor, then press OK key to select the the value by using the numeric keys.
satellite that you want. 3.1.7Pol: Press ◄► key to changeVertical or horizontal of
polarization.
3.1.8 Search mode:Press ◄► key to select search mode:
TV Only, All Service, FTA Only.
3.1.9LNB Power: Press ◄► key to select the desired option.
If your meter is connected to another receiver through Loop
Throught support, in case the other receiver connected dir-
ectly to the LNB, then select OFF.
3.1.2LNB type: Press ◄►key, you can select single/Universal/ 3.1.10 LNB 22KHZ:22KHz control is automatically set for
UnicableSCRetc, according to your physical LNB type. each LNB alternative. If “Universal” is selected, 22KHz
control should be “off state”.

07-Digital Satellite Meter Digital Satellite Meter-08

Downloaded from www.Manualslib.com manuals search engine

 THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

3.1.11 DisEqc type & Input:Press ◄►key to set the port

type or number, which get the RF signal from the LNB, if
the LNB is connectedto DiSEqC switching box.
3.1.12 Motor: If you use the equipment of motor, Accord-
ing to your motor category, the meter providesDiSEqC1.2/
USALS. This will make you have exactin formation to dir-
ect your antenna toward a satellite.
Press ◄► key to select Motor type, then press OK key into
interface of motor set. DiSEqC1.2 SET
￭ Satellite: Press ◄►key to select the desired satellite.
￭ Frequency: Press ◄►key to select the TP.
￭ Move Step:The satellite now can be turned into the desired
direction using the arrow buttons
￭ Continuous Move: The satellite can be continuous moved
to the desired direction.
￭ Set Limit: Set limits for the antenna.
USALS SET ￭ Go to Reference: A starting point for the satellite search fun-
￭ Satellite: Press ◄►key to select the desired satellites. ction can be selected by pressing the OK key. If the signalis locked,
￭ Frequency: Press ◄►key to select the TP. the present position is automatic stored.
￭ Satellite Pos: Position of satellite, input the value by using 3.1.13 Unicable setting: If in the '3.1.2 LNB type' select
the numeric keys. you can set SCR.
￭Unicable type: You can select '8*SCR”or”4*SCR”.
￭ My Longitude & My Latitude : Position of local, Input the
￭ Channel No. : You can select SCR channel.
value by using the numeric keys.
￭Press ◄► key select frequency of SCR channel or Input the value
￭Pos Command: Check the signal locked, the motor moves by using the numeric keys.
correct position,press OK key to store the present position.

09-Digital Satellite Meter Digital Satellite Meter-10

Downloaded from www.Manualslib.com manuals search engine

 THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

Press ◄► key to select S/Q, Monitor, Scan, Auto, Blind,then

press OK key into function.
￭ S/Q: Enlarge showing of the strength and quality

3.1.0.1 Quick Search

￭ Monitor: Level Showing the strength and quality

￭ Scan : According to the current TP,search channel

￭ Auto : According to the user db of satellite,search channel.
In satellite search interface,pressing OK key will enter the
quick search.
If you set Longitude and Latitude Under the “3.6 system setting”,
the angle of LNB, theorientation and elevation of antenna, all
will be displayed on the screen.
Press ▲▼ key to select the TP frequency.

11-Digital Satellite Meter Digital Satellite Meter-12

Downloaded from www.Manualslib.com manuals search engine

 THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

￭ Blind search: Blind search all frequency.The first, scan all TP,
According to these Tps, auto scan programs

It will appear “ storage device is inserted ” when USB device

is inserted to the USB port that means the usb device has been
recognized and can be used. Otherwise will appear “USB
3.2 TP Manager Device Not Found”.
Press ◄► keyto change satellite .Pressing OK /▲▼ key, sw-
itch to TP select USB feautres:
Press ◄► key to change satellite .Pressing▲▼ key to select Multi system format support: FAT16, FAT32 and NTFS format etc.
TP. Mulit file format support: wma, mp3,mp4,avi,jpg,jpeg,bmp,img etc
3.3.1MUSIC:Press ▲▼ key to select song, then press OK
key to play.

￭Press F1 key to add TP

￭Press F2 /OK key to edit TP
￭Press F3 key to delete the current TP
￭Press F4 Key to search the current TP
3.3 Multimedia: The meter intergrates USB port, which
support the following device:
lUSB portable harddisk lUSB memory

13-Digital Satellite Meter Digital Satellite Meter-14

Downloaded from www.Manualslib.com manuals search engine

 THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

Press F1/F2 key to control volume.

Press ◄►key to move the cursor, then press OK key to
operate function.
There are functions of Play/Pause, Previous song,
Next song and stop and so on.
3.3.2VIDEO: Press ▲▼ key to select the video file, then
press OK key to play.

Press MENU key to appear playing bar.

Press ◄► key to move the cursor, then press OK key
to operate function.
There are functions of Rotating, Delay setting, ZOOM, Play
/Pause, Previous Picture, Next picture, Stop
3.3.4 Upgrade
Press ◄►key to control volume. Press MENU key to appear Press F1 key to dump user database.
playing bar. Press F2 key to dump default database.
Press ◄►key to move the cursor, then the tip will appear Press F3 key to dump flash.
on upper right of screen, then press OK key to operate fun- Press ▲▼ key to select update file,
ction. There are functions of Backward, Forward, Play/ Then press OK key to select upgrade part: app code;user
Pause, Previous file, Next file, Stop. database; default database.
3.3.3 PICTURE: Press ▲▼ key to select picture, then press
OK key to play.

15-Digital Satellite Meter Digital Satellite Meter-16

Downloaded from www.Manualslib.com manuals search engine

 THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

Example: 3.4.1Language:Press ◄►key to select language.

1.If you want to update main code, please select the main 3.4.2Screen format: Press ◄► key to select Screen format:
code file like BT_CP09_V1_39_SA~N.img, the size of 4:3PS/4:3LB/16:9PS/16:9LB.
file is about a few Mbytes, then select upgrade app code. 3.4.3Factory reset :The factory default allows user to res-
2.If you want to update user database, please select the us- tore the factory reset values, when you press OK key, the
erdb file like userdb. img, the size of file is 256kbytes, then Warning window will appear, if you select yes, the system
select upgrade user db setup will be reset to the default values.
3.If you want to update default database, please select the Warning: On selecting factory default you will lost all of
default file like asia. img, the size of file is128kbytes, then data and information, which was previous installed.
select upgrade default db. 3.4.4Longitude & Latitude;Location &Hemisphere
Warning: while updating meter software data, should not Input the value by using the numeric; the value must be no-
power off and must wait for finish write data. thigherthan180.
If the location longitude A is higher than 180, the valuewill be
3.4 System Setting (360-A),then press ◄► key to change location/Hemisphere
This menu consists of sub-menus shownas below:
Exp:
Local longitude is East 200.
You should input west (360-200)=160
3.4.5 Time Zone:Press ◄►key to set Time Zone.
3.4.6Channel reset:Press OK key to Restore defaultChannel
setting

17-Digital Satellite Meter Digital Satellite Meter-18

Downloaded from www.Manualslib.com manuals search engine

 THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

3.4.7Mode,SW VER,Release Time:You can look into info- 4.1.2 Del Channel
rmation of hardware and software. 1.Press ▲▼ key to select TV.
2.Press F2 key, the TV will be marked with the symbol “X”,
4. Channel marking all channels that you need to delete.
4.1 Manager Channel:Press F4 key into the manager cha- 3.Press MENU key,the Warning window will appear,if you
nnel interface select yes,the modification will be saved.

4.1.1 RenameChannel
1.Press F1 key.You will notice the Keyboard menu in screen.
4.1.3 LockChannel
2.Press the arrow keys to Input channel name. 1.Press ▲▼ key to select TV.
3.Press F3 key to switch caps lock; press F1 key to backspace; press 2.Press F3 key,then input “0,0,0,0” ,the TV will be marked
F4 key to complete the edit. with the symbol lock, marking all TV that you need to lock.
4.Press MENU key,the Warning window will appear,ifyou select yes, 3.Press MENU key,the Warning window will appear, if you
the modification will be saved select Yes, The modification will be saved.

19-Digital Satellite Meter Digital Satellite Meter-20

Downloaded from www.Manualslib.com manuals search engine

 THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

4.1.4 Skip Channel 4.2.2Sort order

1.Press ▲▼ key to select TV. 1.Press F2 key, you will notice the sub-menu with sort order
2.Press F4 key, the TV will be marked with the symbol in screen.
“↑↓”. 2.Select the desired one of the four sort order in screen and
3.Press ▲▼ key to skip TV, Press F4/OK key to confirm, press OK.
3.Press MENU key, the Warning window will appear, if you
skip all TV that you need.
select yes, the modification will be saved
4. Press MENU key,the Warning window will appear, if
you select Yes, the modification will be saved.

4.2.3 Favorite set

4.2 Favorite Manager Press ▲▼ key to select TV.
Press F3 key into the manager channel sort interface,then Press OK key, the TV will be marked with the symbol '❤'.
press menu key to return favorite manager. Press MENU key,the Warning window will appear, if you
select yes, the modification will be saved.

4.2.1Rename:Please make reference to rename of “4.1.1

Rename channel”.

21-Digital Satellite Meter Digital Satellite Meter-22

Downloaded from www.Manualslib.com manuals search engine

 THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

4.2.4 Favorite Sort 2. Press ▲▼ key to select satellite sort, the channel list will be
Press F3 key, you will notice the sub-menu with sort order changed.
in screen. 3. Press MENU key, the Warning window will appear, if you
select yes, the modification will be saved.
Press ▲▼ key to select sort.
Favorite setting will be put into this sort. 4.3 EPG
Press MENU key,the Warning window will appear, if you Press the F2 key to show EPG menu.
select yes, the modification will be saved. The Guide supplies information such as program listing, star-
ting and ending items for alll available programs.
1.Press ▲▼ key to change current channel.
2.Press ◄► keys to view the information in 7 days
3.Press F2 key to view the bookeditems data.
In the booked items menu, press F1 key to cancle the current
item,press menu to return.
Press F1 key to items setecting.

4.2.5TV/Radio:Press TV/Radio key to switch TV or radiolist.

4.2.6Sat sort
1. Press F4 key, you will notice the sub-menu with sort order
in screen.

23-Digital Satellite Meter Digital Satellite Meter-24

Downloaded from www.Manualslib.com manuals search engine

 THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

Press F1 key, return to channel select. 5Technical Specification

1.Press ▲▼ key to select item.
TRANSMISSION STANDARDS
2.Press F4 key to change detail information page.
3.Press F2 key to book the current item,and enter the DVB-s2/S,H.264
bookeditems menu. SATELLITE INPUT/DEMODULATION
Connector Type F Type
4.4 Program List
Input Frequency 950 to 2150 MHz
Press OK key into program list interface.
Please make reference to“4.2 Favorite Manager”. Signal Input Level -65 to -25dBm
Band Switch Control 22KHz
LNB Supply 13V/18V, Imax 400mA
Demodulation Type QPSK,8PSK
Symbol Rate 2<Rs<45 Mband(SCPC/MCPC)
LCD FEATURES
LCD Type TFT TRANSMISSIVE
Number of Dots 320(RGB) x240
4.5 Subtitle Active area (WxH) 70.08x52.56 mm 2
1.Press F1 key, you will notice the sub-menu with sort order AV output interface
in screen. Connector Type 3.5 mm Jack
2.Press▲▼ key to change subtiltle.
Video Output CVBS,
3.Prss OK key to confirm. Audio output Stereo Audio L/R output
AV input interface
Connector Type 3.5 mm Jack
Video input CVBS,
Audio input Stereo Audio L/R input
AUDIO/VIDEO PROCESSING
Video decompression H.264 MP&HP@L4,HW JPEG decoding
Resolving rate PAL-25 frame@720*576,NTSC-30
frame@720*480,

25-Digital Satellite Meter Digital Satellite Meter-26

Downloaded from www.Manualslib.com manuals search engine

 THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|

Signal compatibility Support conversion for different video formats 6Trouble Shooting
Video Format 4:3,16:9,By Pan & Scan and Letter
Box conversion Problem Possible Causes What To Do
Audio output mode Stereo, Mono,R/L Power switch is not on Check to make sure power
No display light up Run out of batteries on. Even on adapter. Press
DATA SERVICE PORT B.light key
Connector USB No sound or picture,but
the front panel power AV IN jack insert, Pull out AV IN cable
Data protocol USB2.0 interface but no video input
light is ON.
File management system NTFS,FAT32,FAT16 Adjust the dish. Check
The satellite dish is not
No sound or picture pointing at the satellite. the Signal Level in the
file format wma,mp3,mp4,avi,jpg,jpeg,bmp,img Antenna Setup Menu
MICROPROCESSOR Check the cable connections.
Microprocessor Amlogic LNB and other equipment
No signal or weak signal connected between the LNB
Clock Frequency 180MHz and the meter and adjust the
dish.
SDRAM Memory 512Mbit The satellite dish in not Adjust the dish.
Bad picture pointing at the satellite
Power SUPPLY
/Blocking Error Connect a signal attenuator
Signal is too strong
Li_Ion Battery 8.4V/3000mAh to the LNB input

Adapter OUTPUT :DC12V/1.5A, Satellite dish is too small Change to a larger dish
INTUPT :100-240VAC 50/60Hz Change to an LNB with
Power consumption Max. 10W LNB noise factor too high. lower noise factor

PHYSICAL CHARACERSTICS The LNB is faulty. Change the LNB

3 The system is connect- ChecktheUHFchannel,

Size (W x D x H) 95x155x45(mm ) ed by SCART cable and
AV out No picture(Video) fixed in your system and
Net Weight 0.5KG TV is not in AV mode. turn the UHF properly.
Out of battery Even on adapter
The key is not working make sure no blocks
Key blocks
between the front panel

Note: If you still cannot resolve the problem with the above
references. Please contact the local dealer or their aftersales
service center.

27-Digital Satellite Meter Digital Satellite Meter-28

Downloaded from www.Manualslib.com manuals search engine