Scribd
Upload
170 views1 page

SEKO MFV Multifunction Valve

The multifunctional valve is designed for installation on dosing pumps to manage delivery pressure and prevent siphoning. It features various connection options and is compatible with a range of chemical products, with all diaphragms made of PTFE. The valve aims to enhance pump performance while ensuring safety and ease of installation.

Uploaded by

Bradley Port
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
170 views1 page

SEKO MFV Multifunction Valve

The multifunctional valve is designed for installation on dosing pumps to manage delivery pressure and prevent siphoning. It features various connection options and is compatible with a range of chemical products, with all diaphragms made of PTFE. The valve aims to enhance pump performance while ensuring safety and ease of installation.

Uploaded by

Bradley Port
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ACCESSORIES

MULTIFUNCTION VALVE - Solenoid Pumps

TECHNICAL CHARACTERISTICS

The multifunctional valve should be installed directly on


to the dosing pump’s delivery connector. It may also be
positioned as desired before tightening the ring nut.
Connect the delivery tube and the bleed tube as shown
in the assembly diagram. The bleed tube must be
connected to the product tank, making sure that it
remains above the maximum level of the product itself.

Connections Pressure Relief


Code Body Diaphragm Seals Safety Pressure
for tube Ø Adjustable

EM99106740 FPM
Ø 4x6
EM99106741 EPDM
PVDF PTFE 0 ÷ 18 bar 0 ÷ 5 bar
EM99106742 FPM
Ø 8x12
EM99106743 EPDM

EM99106991 FPM Ø 4x6 – 8x12


PVDF PTFE with Wall Fixing 0 ÷ 18 bar 0 ÷ 5 bar
EM99106992 EPDM Bracket

The precision of the electromagnetic pumps is influenced by the variation in delivery pressure, especially
between 0 and 1 bar. Furthermore, backpressure dosing prevents the generation of pump siphoning
phenomena. When, rather, the pump uses backpressure dosing, it may need to be protected from
excessive pressure that could cause malfunctioning and breakdown of the pump as well as the system.
Our multifunctional valve is designed to solve these series of problems with a single accessory that is
small and easy to install onto the pump.

The parts in contact with the liquid were chosen to guarantee complete compatibility with most of the
chemical products normally used. Given the variety of chemical products that exist on the market,
verifying chemical compatibility between the dosed product and the contact materials is recommended.
All of the diaphragms are made of PTFE.

DosingPump.ir

Technical data can be changed without notice


1 of 1 TD_Multifunction Valve_rev 1.0

You might also like