Actuators
Technical data sheet
225-230T-05
Rotary drive
without spring return
Description
Actuator for adjusting air dampers of 90° angle of rotation
to be used in HVAC installations.
Torque Motor 5 Nm
Nominal Voltage 230 VAC/DC
Control 2/3 Point
Damper size up to approx. 1 m²
Damper coupling Clamp
◊ 8-12 mm / Ø 8-16 mm
Technical data
Electrical data Nominal voltage 230 VAC/DC
Nominal voltage range 85...265 VAC
Power consuption motor (motion) 1,5 W
Power consuption standby (end position) 1,0 W
Wire sizing 3,5 VA
Control 2/3 point
Position feedback -
Auxiliary switch -
Contact load -
Switching point -
2014-10-27 10:06:26 • Copyright by GRUNER AG • Subject to change in technology and Design
Connection Motor screw terminals, on cable
0,5...1,5mm²
Connection Auxiliary switch -
Connection Position feedback -
Connection GUAC -
Functional data Torque Motor > 5 Nm
Synchronised speed -
Direction of rotation selected by switch
Manual override Gearing latch disengaged with pushbutton,
self-resetting
Angle of rotation 0°... max. 95°
Can be limited with adjustable
mechanical end stop min 20°
Running time Motor 60...120 s / 90°
Sound power level Motor < 35 dB(A)
Damper coupling clamp
◊ 8-12 mm/ Ø 8-16 mm
Position indication mechanical with pointer
1
225-230T-05 Actuators >> Technical data sheet
Technical data
Functional data Service life > 60'000 cycles (0° - 95° - 0°)
Safety Protection class II (double insulation)
Degree of protection IP 52 (Cable port downwards)
EMC CE (2004/108/EG)
LVD CE (2006/95/EG)
RoHS CE (2011/65/EU)
Mode of operation Typ 1 (EN 60730-1)
Rated impulse voltage 4 kV (EN 60730-1)
Control pollution degree 3 (EN 60730-1)
Ambient temperature normal operation -30°...+50°
Storage temperature -30°...+80°
Ambient humidity 5...95% r.F.,
non- condensating (EN 60730-1)
Maintenance maintenance free
Dimensions/ Weight Dimensions 145 x 65 x 61 mm
Weight ca. 530 g
Operating mode / Properties
Operating mode Direct mounting
2- point. Simple direct mounting on the damper
Through connecting the power supply to spindle with a universal spindle clamp,
1+2 and the direction of rotation switch on supplied with an anti-rotation strap to
position “R” moves the actuator to position prevent the actuator from rotating.
1. Is also 1+2+3 connected to the power
supply the actuator is moving to position 0. Manual override
Manual override is possible with the
3- point. self-resetting pushbutton (the gearing latch
Through connecting the power supply to remains disengaged as long as the
1+2 and the direction of rotation switch on pushbutton is pressed)
position “R” moves the actuator to position
1. If the power supply is interrupted the Rotary direction switch
actuator maintains its current position. Is R/ CW = clockwise
also 1+3 connected to the power supply L/ CCW = counter clockwise
the actuator is moving in direction 0.
The actuator is overload-proof, requires no
2014-10-27 10:06:26 • Copyright by GRUNER AG • Subject to change in technology and Design
limit switches and automatically stops
when the end stop is reached.
2
225-230T-05 Actuators >> Technical data sheet
Connection / Safety remarks
Safety remarks
-Attention mains voltage
-The actuator is not allowed to be used
outside the specified field of application,
especially in airplanes.
-In may only be installed by suitably trained
personnel. Any legal regulations or
regulations issued by authorities must be
observed during assembly.
-The device may only be opened at the
manufacturer´s site.
-When calculating the required torque, the
specifications supplied by the damper
manufacturers (cross- section, design,
installation site), and the air flow conditions
must be observed.
-The actuator is not allowed to be disposed
of as household refuse. All locally valid
regulations and requirements must be
observed.
2014-10-27 10:06:27 • Copyright by GRUNER AG • Subject to change in technology and Design
3
225-230T-05
Technical drawing
Actuators >> Technical data sheet
4
2014-10-27 10:06:28 • Copyright by GRUNER AG • Subject to change in technology and Design
225-230T-05 Actuators >> Technical data sheet
2014-10-27 10:06:28 • Copyright by GRUNER AG • Subject to change in technology and Design
Gruner AG
post office box (P.O.Box) 1149 • D-78564 Wehingen
Tel. +49 7426 948-0 • Fax +49 7426 948-200 • www.gruner.de •
[email protected] 5
Powered by TCPDF (www.tcpdf.org)
