Scribd
Upload
287 views19 pages

Welding Symbols 2

Welding symbols are used to convey welding instructions from designers to welders. They are made up of several elements including a reference line, arrow, basic weld symbol, dimensions, supplementary symbols, counters, finishes, tails, and processes. The basic symbol indicates the type of weld, such as a fillet, square, bevel, or V-groove weld. Additional elements provide information on weld size, length, location, and finishing requirements to fully specify the welding work. Dimensional values, symbols for full penetration or intermittent welds, and processing details are incorporated systematically to communicate all necessary details for performing the welds.

Uploaded by

Sastrawan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
287 views19 pages

Welding Symbols 2

Welding symbols are used to convey welding instructions from designers to welders. They are made up of several elements including a reference line, arrow, basic weld symbol, dimensions, supplementary symbols, counters, finishes, tails, and processes. The basic symbol indicates the type of weld, such as a fillet, square, bevel, or V-groove weld. Additional elements provide information on weld size, length, location, and finishing requirements to fully specify the welding work. Dimensional values, symbols for full penetration or intermittent welds, and processing details are incorporated systematically to communicate all necessary details for performing the welds.

Uploaded by

Sastrawan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 19

BASIC WELDING SYMBOLS

05-AUG-2006

WHAT IS WELDING?
A metal-joining process that uses the heat generated by a combination of oxygen
and a fuel gas to melt two similar metals together and are integrally joined
when cooled.
WHAT IS A WELDING SYMBOL?
Graphical symbols for welding to convey the complete welding information from
the designer to the welder in terms of drawings.
It denotes a symbol made up of several elements to convey the welding instruction
WELD SYMBOLS: It is an ideograph ,used to indicate the type of weld required

05-AUG-2006

EIGHT ELEMENTS OF WELDING SYMBOLS


REFERENCE LINE
ARROW
BASIC WELD SYMBOLS
DIMENSIONS AND OTHER DATA
SUPPLEMENTARY SYMBOLS
COUNTER AND FINISH SYMBOLS
TAIL SPECIFICATIONS
PROCESS OR OTHER REFERENCE

05-AUG-2006

Reference line
Basics of the welding symbol
Other elements are oriented with respect to this line
Arrow
Arrow side
Other side-opposite side
Basic weld symbol
Indicates the type of welding to be performed
Placed on center of the reference line, either below or above or on both
sides.

05-AUG-2006

Supplementary Symbols:
Placed at the end of the reference line at the base of the arrow
Conveys additional information relative to the extent of welding, where
the welding is to be performed.
Dimensions:
Length-Right
Size-Left
Spacing of the weld or weld symbols
If length is followed by Dash and another number indicates center to center
spacing of intermittent welds.
The number of spot or projection weld is enclosed in parentheses.
05-AUG-2006

Counter and finish symbols:


The counter symbol is placed above or below the weld symbol
Finish symbol always appears above or below the counter symbol
Finish Symbols:
C-Chipping
G-Grinding
H-Hammering
M-Machining
G-Grinding

05-AUG-2006

Tail Specification:
It will appear on the end of the reference line opposite to the arrow end.
It is used to locate specification, process of other reference
If no tail-When no spec.
Specification and process:
Placed in the tail of the welding symbol
If the spec is given in notes, or indicated elsewhere on the drawing,
it should not be used.

05-AUG-2006

05-AUG-2006

REFERENCE LINE AND ARROW

05-AUG-2006

BASIC WELD SYMBOLS

SQUARE WELD

FILLET WELD

BEVEL

V-GROOVE
05-AUG-2006

10

Continued.

FLARE BEVEL

FLARE-V

05-AUG-2006

11

DIMENSIONS AND OTHER DATA

FILLET SIZE

FILLET LENGTH

IF THE FILLET LENGTH IS FOLLOWED BY A DASH


AND A NUMBER ,i.e. CENTER-TO-CENTER
DISTANCE OF INTERMITTENT WELDS.

GROOVE ANGLE

05-AUG-2006

12

SUPPLEMENTARY SYMBOLS

WELD ALL AROUND

FIELD WELD

05-AUG-2006

13

COUNTER AND FINISH SYMBOLS

FLUSH

CONVEX
05-AUG-2006

CONCAVE
14

TAIL SPECIFICATIONS

05-AUG-2006

15

PROCESS OR OTHER REFERENCE

EBW STANDS FOR - ELECTRONIC BEAM WELDING

05-AUG-2006

16

FILLET WELD

ARROW SIDE

05-AUG-2006

BOTH SIDES SAME FILLET SIZE

17

BOTH SIDES WITH DIFF.FIILET SIZES

FIILET SIZE WITH LENGTH-INTERMITTENT WELD


05-AUG-2006

18

FILLET WELD ALL AROUND

05-AUG-2006

19

You might also like