LTE Product-SDR BBU&RRU Hardware
ZTE University
LTE Targets
Better
coverage
Latency
CP: 100ms
UP: 5ms
Flexible Bandwidth
1.4M
Unpaired-
pectrum
3M
5M
Paired-Spectrum
10M
15M
20M
LTE Structure
MME / S-GW
MME / S-GW
EPC
S1
EPS
Mobility Management
Serving Gateway
Interface between
MME/SGW & eNodeB
eNodeB
EUTRAN
RNC
Node B
X2
X2
X2
eNodeB
eNodeB
eNodeB
Interface between
eNodeBs
Only one Node in E-UTRAN eNodeB
Flexible band width
Evolved Packet Core EPC
Higher spectrum efficiency
Evolved Packet System EPS
High peak rate, Lower latency
Flat and IP-based Network Architecture for LTE
LTE Flat Structure
WCDMA/HSPA
MSCS
GGSN
HLR
MGW
RNC
HSS
x-GW
RNC
Node B
Less
investment
Easy
maintenance
PCRF
EPC
SGSN
IP Backbone
Node B
MME
Without RNC
Reduce
transmission
delay
IP Backbone
eNode B
Better
reliability
eNode B
MME/x-GW
Integrates CN & partial
RNC functions
Flat network structure and IP-based network can reduce the
TCO of LTE network.
eNode B
Full function of Node B
and major function of
RNC
Contents
Mobile Network Evolution
LTE Architecture and Benefits
ZTE
LTE Products
ZTE Unified Radio Sub-System Platform
SDR- Software Defined Radio
OneNetwork Target
GSM/EDGE
UMTS/HSPA
TD-SCDMA
CDMA2000
WiMAX
LTE
GSM/EDGE
ZTE Universal SDR Platform
UMTS/HSPA
LTE
Distributed
IntegratedUniversal
RRU
RRU
RSU
Features
MicroTCA architecture
Multi-Standard support
Baseband sharing and
BBU
software configurable
BBU
RRU sharing and
software configurable
Future-Proof
Future-Proof Platform
Platform with
with Smooth
Smooth Evolution
Evolution Support
Support
LTE Product Portfolio
INTEGRATED
Soft Defined Radio
2xMCPA, MIMO
Multi-mode eNB
Outdoor BS8900
Multi-mode eNB
Indoor BS8800
Femto eNB BS8210
2x40Watts TOC power, 40%
power efficiency for LTE
BBU+RRU
All IP transmission, provides
IP over E1/STM-1 interface
Multi-mode BBU
Outdoor B8201
Multi-mode BBU
Indoor B8200
Multi-mode RRU
R8880
ZTE SDR PRODUCTS ADAPT TO TECHNOLOGY
DIVERSITIES
HSPA
HSPA+
LTE
Unified O&M for simultaneous
running RATs
TCO reduction comparing with
traditional solution
Open Structure Standard B8200
FRONT
Single RAN concept
multi-mode product
SIDE
Standard CPRI V3
interface to RRU
Multi-mode with diff.
baseband cards
Hot backup
power supplier
90 x 485 x 200 mm
Micro-TCA structure,
compact 19
installation
Different RATs
apply different BP
cards, but share all
other parts
CPRI to RRU
IP over E1
TOP
Hot backup Control + Clock + GE/FE
7.33 Kg @ full config.
141W typical power
Multi-mode
ZTE Baseband UnitB8200
Slot 4 & 5 &11
Slot 1 & 2
FS
Slot 8 to 10
BPL/BPN/BPK
Slot 12
FM
PM
SA
Slot 3
CC
Slot 6 & 7
Slot
Module
Description
1 to 2
PM
Power Module, dual backup, -48VDC
SA
Site Alarm module, IP over 8 x E1 interfaces
4 & 5 & 11
FS
6 pairs of optical interfaces on the BPL board
6 to 7
CC
Control & Clock module, O&M interface, 2 x GE/FE
8 to10
BPL/BPN/BPK
1 x BPL/BPN/BPK with 20MHz bandwidth and
3x3.072G CPRI
12
FM
Fan Module
CC Board Front Panel
BPL Board Front Panel
There
are 6 pairs of optical interfaces on the BPL board,
which are mainly used to connect to eRRU.
Advanced SDR R8880
90o
90o
90o
UP
FRONT
LEFT
REAR
RIGHT
DIMENSION:
470 x 340 x 130 mm
VOLUME:
20 Liter
WEIGHT:
18 Kg
PA POWER:
2 x 53 Watts MCPA
TOC POWER:
2 x 40 Watts
MULTI-MODE:
Same frequency GSM/UMTS/LTE
TYPICAL POWER CONSUMPTION:
200 Watts
DOWN
Single RAN concept
multi-mode product
Standard CPRI V3
interface to BBU
All bands, full series
products
Natural cooling, no fans
ZTE SDR R8880
ZTE SDR R8880
Features
Bandwidth
Up to 20 MHz
Transmission Power
240 W (GU), 2*35W(LTE)
Frequency Band
2600/AWS/700/DD/1800/2100/900
Bandwidth support
1.4MHz, 3MHz, 5MHz, 10MHz,
15MHz, 20MHz
Size
470mm340mm130mm
Weight
18Kg
Power mode
-48V DC (-37~-60V DC)
Power Consumption
200w
Waterproof/Dustproof
IP65
Temperture
Long-term: -40 ~ +55 C
Short-term: -45 ~ +65 C
Receiver Sensitivity
Relative humidity
1.4MHz: -108.8 dBm
3MHz: -105.0 dBm
5/10/15/20MHz: -103.5 dBm
5% 100%
R8880 supports triple mode RATs: GSM, UMTS &
LTE.
The reasonable configuration are:
850MHz GSM + LTE
900MHz GSM + LTE, GSM + UMTS, UMTS + LTE
1800MHz GSM + LTE, UMTS + LTE
1900MHz GSM + LTE
2100MHz UMTS + LTE
RRU GLOBAL SYSTEM ARCHITECTURE
eRRU External Port
eRRU External Port on Top and Bottom
Bottom
Top
eRRU Interface Descriptions
No Label
Interface Descriptions
No. Label
Interface Discription
.
1
ANT1
TRX port connect to Antenna
CPI1
OPTICAL FIBER
CONNECTION EBBU
ANT2
TRX port connect to Antenna
CPI2
CASCADING OPTICAL
FIBER
AISG/MON
Contact/RS485/AISG Interface
PWR
Power Port DC-48V
LMT
Local Maintenance Test Port /FE
Port
GND
Protection Ground
GSM/LTE Dual-mode System to Co-existence with
UMTS
08 Q4 launch
ZTE SDR
Platform
LTE hardware ready
Cost effective solution
LTE
GSM
GSM/LTE Dual-mode Platform
+10 years GSM system
Replace by GSM/LTE
dual-mode system
1.
LTE system
G/L dual-mode
2. Software upgrade
GSM/UMTS operators can build a new GSM/LTE network to replace the old GSM system.
The existed UMTS network co-existence with GSM/LTE system.
By software upgrade, the GSM spectrum can refarm to future single LTE system.
UMTS/LTE Dual-mode System to Prove Future
Evolution
Existed GSM system
UMTS/LTE System
UMTS/LTE System
GSM System
2. GSM replace by
U/L system
Build a new UMTS/LTE
dual-mode system
1.
3. Software upgrade
LTE system
GSM operators can build a new U/L network to launch 3G first.
The existed GSM network co-existence with U/L system.
By software upgrade, the GSM spectrum can refarm to U/L system.
UMTS
LTE
UMTS/LTE dual-mode Platform
Jinja GolfClub-3G&4G
Lira-2G&3G&4G
ZXSDR Network Combination Mode
Star
Mode: maximum 9 eRRUs Connected to eBBU
Chain Mode: : maximum 4 eRRUs Cascading
