Scribd
Upload
40 views9 pages

01 - OilGasmanifold

The document provides an overview of oil and gas manifolds, detailing their functions, descriptions, and safety protocols. It explains how oil and gas are directed through manifolds to various outlets and emphasizes the importance of proper valve operation and labeling for safety. Additionally, it includes references for further training and technical information.

Uploaded by

maamoun ramy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
40 views9 pages

01 - OilGasmanifold

The document provides an overview of oil and gas manifolds, detailing their functions, descriptions, and safety protocols. It explains how oil and gas are directed through manifolds to various outlets and emphasizes the importance of proper valve operation and labeling for safety. Additionally, it includes references for further training and technical information.

Uploaded by

maamoun ramy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 9

OIL / GAS

Manifold
OIL and GAS
MANIFOLDS

FTC - SWT
04/16/25
OIL / GAS
Manifold
Contents:

•Description

•Safety

•References

FTC - SWT
04/16/25
OIL / GAS
Manifold
Lecture Objectives,
by the end of this lecture, YOU
should be able to:

- Explain the functions of the Oil &


Gas manifold
- Select them
- List all safety aspects

FTC - SWT
04/16/25
OIL / GAS
Oil Manifold description: Manifold
•The oil produced by the separator can be
directed through an oil manifold to the tank,
production flowline or burner.
•From the tank, the flow is piped to the oil
manifold by way of a transfer pump.
•It can direct flow to either the port or
starboard burner without stopping the well
test because of undesirable wind directions.
FTC - SWT
04/16/25
OIL / GAS
Oil Manifold description: Manifold
•The manifold has five 2-in (or 3-in or 4-in) ball or
plug valves.
•Usually connections are 3”602 (or 4”602) weco-
union.
•WP=1440psi (weakest parts are the flange ASA
600).

FTC - SWT
04/16/25
OIL / GAS
Gas Manifold description: Manifold
•The gas manifold directs the gas produced from
the separator to the port or starboard flare port, a
function of wind direction.
•The manifold usually has two 3-in (or 4-in) ball or
plug valves.
•Usually connections are 3”602 (or 4”602) weco-
union.
•WP=1440psi (weakest parts are the flange ASA
600).
FTC - SWT
04/16/25
OIL / GAS
Oil & Gas Manifolds Safety: Manifold
•All valves should be labeled to indicate flow paths
to avoid diverting the flow in the wrong direction.
•When diverting flow, always open one valve
before closing another.
•Use the correct handles provided with the
manifolds to open and close the valves (do not use
cheaters).

FTC - SWT
04/16/25
OIL / GAS
Manifold
References:

. On Line Training
. InTouch: Technical Data Sheet
& Maintenance manual
. ST training manual

FTC - SWT
04/16/25
OIL / GAS
Manifold
OIL and GAS
MANIFOLDS

The
End
FTC - SWT
04/16/25

You might also like