03 setting up database server sample

03 setting up database server sample

• 1.
  Sharepoint 2013 Administration -SarathChandra Aravapalli
• 2.
  Setting up theDatabase Server What do you need for this Exercise : • Create a VM for setting up DB Server • Windows 2012 / 2008 R2 • .Net Framework 4.5 • SQL Server 2012 R2 Steps for Preparing the Domain Controller : • Prepare the VM • Install Windows 2012 Server • Connect the Server to the Domain • .Net Framework 4.5 • Open the Port in Windows Firewall to allow data pass through • Install the SQL Server application
• 3.
  Why do weneed so many servers and How do they communicate ?
• 4.
  Installing the VirtualMachine Software H Y P E R - V 1. Click on the Start Button on the Host Machine OS 2. Search for Programs and Features 3. Click on Turn Windows Features on or Off 4. Select the Hyper-V and its features 5. Click Ok to install the components Note: You will need to enable the Virtualization chip in BIOS
• 5.
  1. Click onthe Start Button on the Host Machine OS 2. Search for Hype-V Manager [only for windows 8.1 or Windows 2012 or 2012 R2 3. Launch the Hyper-V Manager Setting up the Virtual Machine
• 6.
  Setting up theVirtual Machine 1. Click on Virtual Switch Manager 2. Create an Internal Switch by Selecting Internal Option and select Create Switch 3. You will be prompted to enter the Name for the Virtual Switch
• 7.
  Setting up theVirtual Machine 4. Enter the Name that you can remember and will be easy to identify for later use. Note: This switch will be used for VM to VM Communication and will be assigned a Static IP post installation of the OS.
• 8.
  Setting up theVirtual Machine Now that we have setup the Virtual Switch, it is time to setup the Virtual Machine itself. 1. Click on the New and Select Virtual Machine
• 9.
  Setting up theVirtual Machine Now that we have setup the Virtual Switch, it is time to setup the Virtual Machine itself. 2. Enter the name of the Virtual machine. In this case as I am setting up the Database Server, I named it Database Server as it will be easy to refer to it in the future exercises. 3. I would leave the location for storing the file as default and Click Next 4. Select the Generation as Generation 1 if your host operation is older than Windows 8.1 and click Next again.
• 10.
  Setting up theVirtual Machine 5. Assign the required amount of RAM. In this scenario, although domain controller will not need more than 1.5 GB of RAM, I have allocated about 2GB which will be used by Sharepoint Server. Note: We will be installing the Sharepoint Server on the top of Domain Controller in our exercises.
• 11.
  Setting up theVirtual Machine 6. Select the Network Adaption. This will be Internal Switch that we created before setting up the Virtual Machine. 7. Click Next.
• 12.
  Setting up theVirtual Machine 8. Select the amount of disk space that you wish to allocate. 9. Click Next Note: Recommended Space is 80GB. In our Learning environment we are going to allocate only 40GB of HDD space.
• 13.
  Setting up theVirtual Machine 10. Select the Location of the ISO [Windows 2012 Server Image File] 11. Click Next 12. Review the Summary and Click on Finish 13. You will now see the VM that is created. You can double click on click on the power on Icon to start the VM.
• 14.
  Installing Windows Server2012 1. Double click on the VM from the list. You will see this window on the left 2. Click on the Green power on button to start the VM. 3. It will select the ISO Image and will start the Windows Server Installation.
• 15.
  Installing Windows Server2012 4. Select the Language for Installation and, Time Format and the Keyboard input method and click on Next. 5. Click on Install Now.
• 16.
  Installing Windows Server2012 6. Select Windows Server 2012 DataCenter Evaluation (Server with a GUI) and click Next 7. Review and accept the license Agreement 8. Click Next 9. Click on Custom: Install Windows Only Note: There is no 32-bit evaluation available. Also there is no 32-bit evaluation available for Sharepoint 2013.
• 17.
  Installing Windows Server2012 10. Select the Drive for installing Windows Server 2012 and Click Next. 11. The Installation of windows will start and unlike it’s predecessors, there will not be any human intervention needed during the installation.
• 18.
  12. Enter thepassword for the Administrator account and Hit the Enter Key 13. You will now be logged in as Local Administrator and Server Manager window will open up. Installing Windows Server 2012
• 19.
  Promoting the Serverto DC [Domain Controller] 1. Assign the Static IP to the Virtual Network adapter. 2. Right click on the network icon on the lower right hand side on the VM Window. 3. Select Open Network and Sharing Center 4. Click on Change Adapter Settings
• 20.
  Promoting the Serverto DC [Domain Controller] 5. Right click on the Network Adaptor and Select Properties 6. Select IPv4 and then click on the Properties button 7. Enter the IP Address and Preferred the DNS Address 8. Preferred DNS will be the same as DC’s IP Address
• 21.
  Joining the Serverto the Domain 1. Ensure that the Domain Controller is turned ON. 2. You need to join the Database Server the Domain. 3. After assigning the static IP and DNS Address [same IP of the DC], you need to click on Start > Right Click on Computer > Select Properties 4. On the System Settings screen Click on the Change Settings 5. Click on Change 6. Enter the Computer name as “Database Server”. 7. Enter the Domain Name as “DeloitteOnLine.com”. [ or the name of the Domain that you entered while setting up the DC. ]
• 22.
  Joining the Serverto the Domain
• 23.
  Joining the Serverto the Domain 8. Upon clicking on the OK button, you will be prompted to enter the Domain Administrator Password. 9. Upon validating the Administrator credentials, the Server will be joined to the Domain and you will receive the message : “Welcome to the DeloitteOnline.com Domain”. Yourcompany.com Yourcompany.com Yourcompany.com
• 24.
  Joining the Serverto the Domain 10. You will be prompted to restart the server 11. Click on the Restart Now
• 25.
  Setting up theService Accounts To be performed on Domain Controller
• 26.
  Setting up theService Accounts 1. Now that you have joined the Server to the Domain. It is time to create the Service Account using which we will complete the rest of the Installation. 2. You will be needing a minimum of 3 Service Accounts. • SPFarm – Which will be used to manage Sharepoint Farm • DBAdmin – Which will be used to install and Manage the Database Server • SPAdmin – Which will be used to manage the services on the Sharepoint Farm. Can also be used for testing the Site Collections • All of the accounts needs to be added in the Domain Administrator Group
• 27.
  Setting up theService Accounts 1. Login to Domain Control using the Domain Admin 2. Access the Service Manager and open the Active Directory Users and Computers
• 28.
  Setting up theService Accounts 3. You will now see the ADUC screen. [Active Directory Users and Computers] 4. Create a Organization Unit to keep the Service Accounts belonging to the Sharepoint separately.
• 29.
  Setting up theService Accounts 5. Right click on the Domain Name 6. Click on New > Select Organizational Unit 7. Name it SP Users 8. You will now see a new Folder [OU] named “ SP Users “. Click on it. Yourcompany.com Yourcompany.com
• 30.
  Setting up theService Accounts 1. Right Click on the OU named SP Users 2. Select New > User 3. You will get the New Object – User dialog box. Enter the details for the Service Account to be created. 4. For example: If you are creating the SP Farm Account, then enter the details as below: • First Name: SP Farm • Last Name: Leave it Blank • User Logon Name: SPFarm • Account : SPFarm [ Look at the screenshot in the next slide ] Yourcompany.com
• 31.
  Setting up theService Accounts 5. Click on Next and entering the required information 6. Type the password. 7. Uncheck the option: “User must change password at next Logon” 8. Check the box for : “User Cannot change password “ and “Password Never Expires” 9. Click Next and then Click Finish 10. Repeat the steps 1 – 9 to create the other 2 service accounts. Yourcompany.com Yourcompany.com Yourcompany.com
• 32.
  Setting up theService Accounts 1. Now that we created the required Service Accounts, we need to elevate the permissions of these accounts to Domain Administrator account. 2. For this we need to add the 3 accounts to Domain Administrators Group 3. Click on the Users Folder in ADUC, and select Domain Administrators group 4. Double Click on this Group to open the properties on the Domain Admins Group. Yourcompany.com
• 33.
  Setting up theService Accounts 5. Click on the Members Tab and click the Add button. 6. Type the accounts that we created in the box that reads: “Enter the object names to select”. 7. Click on the Check Names and click OK 8. This will complete the process of setting up the Service Accounts. Yourcompany.com Yourcompany.comusers
• 34.
  Installing .NET Framework
• 35.
  Installing .NET Framework
• 37.
  Do not selectanything on this screen. Click Next Do not select anything on this screen. Click Next
• 40.
  D:sourcesSxS
• 42.
  Installing SQL Server
• 43.
  Yourcompany.com
• 50.
  Select the FollowingFeatures : • Instance Features q Database Engine Services q Analysis Services q Reporting Services - Native • Shared Features q Data Quality Client q SQL Server Data Tools q Client Tools Connectivity q Integration Services q Client Tools Backwards Compatibility q Documentation Components q Management Tools - Basic q Management Tools - Complete q Distributed Replay Controller q Distributed Replay Client q SQL Client Connectivity SDK q Master Data Services