Temperature Sensors – Types
Download as PPTX, PDF•18 likes•12,798 views
The document provides an overview of various types of temperature sensors, including thermocouples, RTDs, thermistors, and digital sensors, detailing their functioning and applications. It explains how each sensor type operates, including their construction, measurement methods, and temperature ranges. Additionally, it highlights specific features of semiconductor sensors and integrated circuits designed for temperature monitoring.
Temperature Sensors – Types
- 1. Temperature Sensors – Types
- 2. http://www.elprocus.com/ A temperature sensor is a device, typically, a thermocouple or RTD, which is provided for temperature measurement through an electrical signal. A thermocouple (T/C) is made from two dissimilar metals that generate electrical voltage in direct proportion to changes in temperature. Temperature sensing can be done either through direct contact with the heating source material or remotely, with indirect touch with the source using radiated energy instead. There is a wide range of temperature sensors available in the market and are listed below. Introduction
- 3. http://www.elprocus.com/ 5 Types of Temperature Sensors Thermocouple The RTD Thermistors Semiconductor sensors Digital Temperature Sensors
- 4. http://www.elprocus.com/ Thermocouple It is a type of temperature sensor, made by joining two dissimilar metals at one end. The joined end is referred to as the HOT JUNCTION. The other end of these different metals is called the COLD END or COLD JUNCTION. The cold junction is actually formed at the last point of thermocouple material. If there is a difference in temperature between the hot junction and cold junction, a small voltage is created.
- 5. http://www.elprocus.com/ This voltage is referred to as an EMF (electro-motive force) and can be measured. It is in turn used to show temperature. Thermocouple(Continue…)
- 6. http://www.elprocus.com/ Resistance Temperature Detector The RTD is a temperature sensing device whose resistance changes with temperature. Typically built from platinum, though devices made from nickel or copper are not uncommon, RTDs can take many different shapes like wire wound, thin film. To measure the resistance of an RTD, apply a constant current, measure the resulting voltage, and determine the RTD resistance. RTDs exhibit relatively linear resistance to temperature curves over their operating regions and any nonlinearity are highly predictable and repeatable.
- 7. http://www.elprocus.com/ The PT100 RTD evaluation board uses surface mount RTD to measure temperature. An external 2, 3 or 4-wire PT100 can also be associated with measure temperature in remote areas. The RTDs are biased using a constant current source. So as to reduce self-heat due to power dissipation, the current magnitude is moderately small. RTD(Continue…)
- 8. http://www.elprocus.com/ Thermistors Similar to the RTD, the thermistor is a temperature sensing device whose resistance changes with temperature. Thermistors, however, are made from semiconductor materials. Resistance is determined in the same manner as the RTD, but thermistors exhibit an extremely nonlinear resistance vs. temperature curve. Thus, in the thermistors operating range we can see a large resistance change for a very small temperature change.
- 9. http://www.elprocus.com/ Thermistors(Continue…) This makes for an extremely sensitive device, ideal for set-point applications.
- 10. http://www.elprocus.com/ Digital Temperature Sensors Digital output sensor usually contains a temperature sensor, analog-to- digital converter (ADC), a two-wire digital interface and registers for controlling the IC’s operation. Temperature is continuously measured and can be read at any time. If desired, the host processor can instruct the sensor to monitor temperature and take an output pin high (or low) if the temperature exceeds a programmed limit. Lower threshold temperature can also be programmed, and the host can be notified when the temperature has dropped below this threshold. Thus, digital output sensor can be used for reliable temperature monitoring in microprocessor-based systems.
- 11. http://www.elprocus.com/ Features DS1621 No external components are required. Temperature range of -55⁰C to +125⁰C in 0.5⁰ intervals is measured. Gives temperature value as a 9-bit reading. Wide power supply range (2.7V to 5.5V). Converts temperature to digital word in less than one second. Thermostatic settings are user definable and Non volatile. It is as 8-pin DIP.
- 12. http://www.elprocus.com/ Pin Description SDA – 2-Wire Serial Data Input/ Output. SCL – 2-Wire Serial Clock. GND – Ground. TOUT – Thermostat Output Signal. A0 – Chip Address Input. A1 – Chip Address Input. A2 – Chip Address Input. VDD – Power Supply Voltage.
- 13. http://www.elprocus.com/ Working of DS1621 When the temperature of the device exceeds a user-defined temperature HIGH then the output TOUT is active. The output will remains active until the temperature drops below user defined temperature LOW. User defined temperature settings are saved in nonvolatile memory so it may be programmed prior to insertion in a system. The temperature reading is provided in a 9-bit, two’s complement reading by issuing the READ TEMPERATURE command in the programming. A 2 wire serial interface is used for input to the DS16121 for the temperature settings and for output of temperature reading from the DS1621
- 14. http://www.elprocus.com/ Semiconductor sensors They are classified into different types like Voltage Output, Current Output, Digital Output, Resistance Output Silicon and Diode Temperature Sensors. Modern semiconductor temperature sensors offer high accuracy and high linearity over an operating range of about 55°C to +150°C. Internal amplifiers can scale the output to convenient values, such as 10mV/°C. They are also useful in cold-junction compensation circuits for wide temperature range thermocouples.
- 15. http://www.elprocus.com/ Semiconductor sensors Sensor Ics: There is a wide variety of temperature sensor ICs that are available to simplify the broadest possible range of temperature monitoring challenges. These silicon temperature sensors differ significantly from the types mentioned above in a couple of important ways. The first is operating temperature range. A temperature sensor IC can operate over the nominal IC temperature range of -55°C to +150°C. The second major difference is functionality. A silicon temperature sensor is an integrated circuit, and can, therefore, include extensive signal processing circuitry within the same package as the sensor.
- 16. http://www.elprocus.com/ Semiconductor sensors Sensor Ics: Others combine analogue-sensing circuits with voltage comparators to provide alert functions. Some other sensor ICs combine analogue sensing circuitry with digital input/output and control registers, making them an ideal solution for microprocessor-based systems.
- 17. http://www.elprocus.com/ Features of LM35 Temperature Sensor Calibrated directly in ˚ Celsius (Centigrade) Rated for full l −55˚ to +150˚C range Suitable for remote applications Low cost due to wafer-level trimming Operates from 4 to 30 volts Low self-heating ±1/4˚C of typical nonlinearity
- 18. http://www.elprocus.com/ Operation of LM35 The LM35 can be connected easily in the same way as other integrated circuit temperature sensors. It can be stuck or established to a surface and its temperature will be within around the range of 0.01˚C of the surface temperature. This presumes that the ambient air temperature is just about the same as the surface temperature; if the air temperature were much higher or lower than the surface temperature, the actual temperature of the LM35 die would be at an intermediate temperature between the surface temperature and the air temperature. These sensors completely aligned with digital temperature readings in degree Celsius.
- 19. http://www.elprocus.com/ Operation of LM35 LM35-2The temperature sensors have well known applications in environmental and process control and also in test, measurement and communications. A digital temperature is a sensor, which provides 9-bit temperature readings. Digital temperature sensors offer excellent precise accuracy, these are designed to read from 0°C to 70°C and it is possible to achieve ±0.5°C accuracy.