Mingle box - Online Job seeking System

CHAPTER – 1
INTRODUCTION
1
1.1 INTRODUCTION
Mingle Box is a marketplace where people who need custom software
developed can find coders in a safe and business-friendly environment. Buyers
can pick from a pool of registered coders...enabling them to hire a coder across
the country or across the globe from the comfort of their computers.
Coders and buyers both can be benefited from this Bidding. Buyers who
wish to hire internationally, can take advantage of favorable overseas exchange
rates, resulting in work being done for 50-90% less than if the project were done
in-country. Coders are also given access to a huge pool of potential work and
have the ability to work independently from their homes rather than for a
company.
1.2 PURPOSE OF THE PROJECT
In the current world, there will be a definite need of software in order to
make their day to day activities is an inevitable thing. Out of these needy
businesses, most of them may not be able to approach big software consulting
firms. For those people, the existing application will be very useful. In order to
make their work done at lesser costs, they need to find the free lance

programmers, who will do the necessary work for them at comfortable prices at
both ends. The current application suffices the requirements of both people,
those who are looking for automating their business and also the people who are
2
freelance programmers.
1.3 PROBLEM IN EXISTING SYSTEM
• Choosing the right people to code the project with unbeatable quality
while keeping the timelines intact is a challenging task.
• Similarly choosing a buyer, who can provide mission critical tasks at
encouraging cost and a time line, is a difficult thing.
• Most of the times, both these users can not find best solution providers,
as this mere a manual task
1.4 SOLUTION OF THESE PROBLEMS
• Mingle Box is a marketplace where people who need custom software
developed can find coders in a safe and business-friendly environment.
• Buyers can pick from a pool of registered coders enabling them to hire a
coder across the country or across the globe from the comfort of their
computers.
• Coders and buyers both can be benefited from this Bidding, which is a
key actor towards finalizing relationship between code and buyer.

1.5 STUDY OF THE SYSTEM
3
GUI’S
In the flexibility of the uses the interface has been developed a graphics concept
in mind, associated through a browses interface. The GUI’S at the top level have
been categorized as
 Administrative user interface
 The operational or generic user interface
The administrative user interface concentrates on the consistent
information that is practically, part of the organizational activities and which
needs proper authentication for the data collection. The interfaces help the
administrations with all the transactional states like Data insertion, Data deletion
and Date updation along with the extensive data search capabilities.
The operational or generic user interface helps the users upon the system in
transactions through the existing data and required services. The operational user
interface also helps the ordinary users in managing their own information helps
the ordinary users in managing their own information in a customized manner as
per the assisted flexibilities.

CHAPTER – 2
REQUIREMENT ANALYSIS
4
2.1 INTRODUCTION
Purpose: The main purpose for preparing this document is to give a general insight into
the analysis and requirements of the existing system or situation and for determining the
operating characteristics of the system.
Scope: This Document plays a vital role in the development life cycle (SDLC) and it
describes the complete requirement of the system. It is meant for use by the developers
and will be the basic during testing phase. Any changes made to the requirements in the
future will have to go through formal change approval process.
DEVELOPERS RESPONSIBILITIES OVERVIEW
The developer is responsible for:
 Developing the system, which meets the SRS and solving all the requirements of the
system?
 Demonstrating the system and installing the system at client's location after the
acceptance testing is successful.
 Submitting the required user manual describing the system interfaces to work on it
and also the documents of the system.

 Conducting any user training that might be needed for using the system.
 Maintaining the system for a period of one year after installation.
5
FUNCTIONAL REQUIREMENTS
The proposed web application should serve the following features.
 Registration of Coders
 Registration of Buyers
 Adding projects for bidding
 Conduct online bidding
 Selecting coders through bidding
 Payments for the completed work by buyers to coders.
PERFORMANCE REQUIREMENTS
Performance is measured in terms of the output provided by the application.
Requirement specification plays an important part in the analysis of a system. Only
when the requirement specifications are properly given, it is possible to design a system,
which will fit into required environment. It rests largely in the part of the users of the
existing system to give the requirement specifications because they are the people who
finally use the system. This is because the requirements have to be known during the
initial stages so that the system can be designed according to those requirements. It is
very difficult to change the system once it has been designed and on the other hand
designing a system, which does not cater to the requirements of the user, is of no use.
The requirement specification for any system can be broadly stated as given below:

 The system should be able to interface with the existing system
6
 The system should be accurate
 The system should be better than the existing system
The existing system is completely dependent on the user to perform all the duties.
HARDWARE REQUIREMENTS
Content Description
HDD 20 GB Min
40 GB Recommended
RAM 1 GB Min
2 GB Recommended
SOFTWARE REQUIREMENTS
Content Description
OS Windows XP with SP2 or Windows Vista
Database MS-SQL server 2005
Technologies ASP.NET with C#.NET
IDE Ms-Visual Studio .Net 2008
Browser IE

7
2.2 FEASIBLITY STUDY
TECHINICAL FEASIBILITY
Evaluating the technical feasibility is the trickiest part of a feasibility study. This
is because, at this point in time, not too many detailed design of the system, making it
difficult to access issues like performance, costs on (on account of the kind of
technology to be deployed) etc.A number of issues have to be considered while doing a
technical analysis.
Understand the different technologies involved in the proposed system:
Before commencing the project, we have to be very clear about what are the
technologies that are to be required for the development of the new system.
Find out whether the organization currently possesses the required technologies:
 Is the required technology available with the organization?
 If so is the capacity sufficient?
 For instance –
 “Will the current printer be able to handle the new reports and forms required for
the new system?”

OPERATIONAL FEASIBILITY
Proposed projects are beneficial only if they can be turned into information systems that
will meet the organizations operating requirements. Simply stated, this test of feasibility
asks if the system will work when it is developed and installed. Are there major barriers

to Implementation? Here are questions that will help test the operational feasibility of a
8
project:
 Is there sufficient support for the project from management from users? If the
current system is well liked and used to the extent that persons will not be able to
see reasons for change, there may be resistance.
 Are the current business methods acceptable to the user? If they are not, Users
may welcome a change that will bring about a more operational and useful
systems.
 Have the user been involved in the planning and development of the project?
Early involvement reduces the chances of resistance to the system and in General
and increases the likelihood of successful project.
ECONOMIC FEASIBILITY
It refers to the benefits or Outcomes we are deriving from the product as
compared to the total cost we are spending for developing the product. If the benefits
are more or less the same as the older system, then it is not feasible to develop the
product.
In the present system, the development of new product greatly enhances the
accuracy of the system and cuts short the delay in the processing of Birth and Death
application. The errors can be greatly reduced and at the same time providing a
great level of security. Here we don’t need any additional equipment except memory
of required capacity.
No need for spending money on client for maintenance because the database
used is web enabled database.

9
2.3 DATA FLOW DIAGRAMS
A data flow diagram is graphical tool used to describe and analyze movement of
data through a system. These are the central tool and the basis from which the other
components are developed. The transformation of data from input to output, through
processed, may be described logically and independently of physical components
associated with the system. These are known as the logical data flow diagrams. The
physical data flow diagrams show the actual implements and movement of data between
people, departments and workstations. A full description of a system actually consists
of a set of data flow diagrams. Using two familiar notations Yourdon, Gane and Sarson
notation develops the data flow diagrams. Each component in a DFD is labeled with a
descriptive name. Process is further identified with a number that will be used for
identification purpose. The development of DFD’S is done in several levels. Each
process in lower level diagrams can be broken down into a more detailed DFD in the
next level. The lop-level diagram is often called context diagram. It consists a single
process bit, which plays vital role in studying the current system. The process in the
context level diagram is exploded into other process at the first level DFD.
The idea behind the explosion of a process into more process is that
understanding at one level of detail is exploded into greater detail at the next level. This
is done until further explosion is necessary and an adequate amount of detail is
described for analyst to understand the process.
Larry Constantine first developed the DFD as a way of expressing system
requirements in a graphical from, this lead to the modular design.

A DFD is also known as a “bubble Chart” has the purpose of clarifying system
requirements and identifying major transformations that will become programs in
system design. So it is the starting point of the design to the lowest level of detail
10
DFD SYMBOLS:
In the DFD, there are four symbols
 A square defines a source(originator) or destination of system data
 An arrow identifies data flow. It is the pipeline through which the
information flows
 A circle or a bubble represents a process that transforms incoming data flow
into outgoing data flows.
 An open rectangle is a data store, data at rest or a temporary repository of
data
Process that transforms data flow.
Source or Destination of data
Data flow
Data Store

11
CONSTRUCTING A DFD:
Several rules of thumb are used in drawing DFD’S:
 Process should be named and numbered for an easy reference. Each name
should be representative of the process.
 The direction of flow is from top to bottom and from left to right. Data
traditionally flow from source to the destination although they may flow
back to the source. One way to indicate this is to draw long flow line back to
a source. An alternative way is to repeat the source symbol as a destination.
Since it is used more than once in the DFD it is marked with a short
diagonal.
 When a process is exploded into lower level details, they are numbered.
 The names of data stores and destinations are written in capital letters.
Process and dataflow names have the first letter of each work capitalized
A DFD typically shows the minimum contents of data store. Each data store should
contain all the data elements that flow in and out.
Questionnaires should contain all the data elements that flow in and out. Missing
interfaces redundancies and like is then accounted for often through interviews.
SAILENT FEATURES OF DFD’S
 The DFD shows flow of data, not of control loops and decision are
controlled considerations do not appear on a DFD.
 The DFD does not indicate the time factor involved in any process whether
the dataflow take place daily, weekly, monthly or yearly.

12
TYPES OF DATA FLOW DIAGRAMS
 Current Physical
 Current Logical
 New Logical
 New Physical
CURRENT PHYSICAL:
In Current Physical DFD process label include the name of people or their
positions or the names of computer systems that might provide some of the overall
system-processing label includes an identification of the technology used to process the
data. Similarly data flows and data stores are often labels with the names of the actual
physical media on which data are stored such as file folders, computer files, business
forms or computer tapes.
CURRENT LOGICAL:
The physical aspects at the system are removed as mush as possible so that the
current system is reduced to its essence to the data and the processors that transforms
them regardless of actual physical form.
NEW LOGICAL:
This is exactly like a current logical model if the user were completely happy
with the user were completely happy with the functionality of the current system but had
problems with how it was implemented typically through the new logical model will
differ from current logical model while having additional functions, absolute function
removal and inefficient flows recognized.

13
NEW PHYSICAL:
The new physical represents only the physical implementation of the new
system.
RULES GOVERNING THE DFD’S
PROCESS
 No process can have only outputs.
 No process can have only inputs. If an object has only inputs than it must be
a sink.
 A process has a verb phrase label.
DATA STORE
 Data cannot move directly from one data store to another data store, a
process must move data.
 Data cannot move directly from an outside source to a data store, a process,
which receives, must move data from the source and place the data into data
store
 A data store has a noun phrase label.
SOURCE OR SINK
The origin and / or destination of data.
 Data cannot move direly from a source to sink it must be moved by a process
 A source and /or sink has a noun phrase land

14
DATA FLOW
 A Data Flow has only one direction of flow between symbols. It may flow
in both directions between a process and a data store to show a read before
an update. The later is usually indicated however by two separate arrows
since these happen at different type.
 A join in DFD means that exactly the same data comes from any of two or
more different processes data store or sink to a common location.
 A data flow cannot go directly back to the same process it leads. There must
be atleast one other process that handles the data flow produce some other
data flow returns the original data into the beginning process.
 A Data flow to a data store means update (delete or change).
 A data Flow from a data store means retrieve or use.
A data flow has a noun phrase label more than one data flow noun phrase can appear on
a single arrow as long as all of the flows on the same arrow move together as one
package.

Context Diagram:
First Level DFD :
15

Second Level DFD for Bidding:
16

Second level DFD for Buyer:
17

Second Level DFD for Registration:
18

19
2.4 ER DIAGRAM
 The relation upon the system is structure through a conceptual ER-Diagram, which
not only specifics the existential entities but also the standard relations through
which the system exists and the cardinalities that are necessary for the system state
to continue.
 The entity Relationship Diagram (ERD) depicts the relationship between the data
objects. The ERD is the notation that is used to conduct the date modeling activity
the attributes of each data object noted is the ERD can be described resign a data
object descriptions.
 The set of primary components that are identified by the ERD are
 Data object  Relationships
 Attributes  Various types of indicators.
The primary purpose of the ERD is to represent data objects and their relationships.

21
2.5 DATA DICTIONARIES
After carefully understanding the requirements of the client the the entire data
storage requirements are divided into tables. The below tables are normalized to avoid
any anomalies during the course of data entry.

CHAPTER -3
DESIGN
24
3.1 INTRODUCTION
Software design sits at the technical kernel of the software engineering process
and is applied regardless of the development paradigm and area of application. Design is
the first step in the development phase for any engineered product or system. The
designer’s goal is to produce a model or representation of an entity that will later be
built. Beginning, once system requirement have been specified and analyzed, system
design is the first of the three technical activities -design, code and test that is required
to build and verify software.
The importance can be stated with a single word “Quality”. Design is the place
where quality is fostered in software development. Design provides us with
representations of software that can assess for quality. Design is the only way that we
can accurately translate a customer’s view into a finished software product or system.
Software design serves as a foundation for all the software engineering steps that follow.
Without a strong design we risk building an unstable system – one that will be difficult
to test, one whose quality cannot be assessed until the last stage.
During design, progressive refinement of data structure, program structure, and
procedural details are developed reviewed and documented. System design can be
viewed from either technical or project management perspective. From the technical
point of view, design is comprised of four activities – architectural design, data structure
design, interface design and procedural design.

25
3.2 STRUCTURED CHART
Change the workflow according to the project

26
3.3 MODULES DESCRIPTION
The system is differentiated into 3 major modules which are closely integrated
with one another.
 Administration
The administration module facilitates registering the buyers and coders. It
enables the buyer and coder login and performs their respective work. Once
the coder or buyer is inactive for long period, they will be deleted by the
administrator.
 Coders
The coder can post his/her profile with the expertise information in mingle
box. The coder can bid the project online based on his expertise. Once the
coders bid are approved, he/she can start coding and deliver the builds as per
timelines, to get the remuneration properly.
 Buyers
A role of a buyer is to post the projects. While posting a project for bidding,
the buyer will furnish the information related to technologies to be used in the
project and the expected timelines for each deliverable. The buyer allocates
projects to the coders based on the bid.

27
INPUT DESIGN
Input design is a part of overall system design. The main objective during the input
design is as given below:
 To produce a cost-effective method of input.
 To achieve the highest possible level of accuracy.
 To ensure that the input is acceptable and understood by the user.
INPUT STAGES:
The main input stages before the information gets stored in the database media:
 Data recording
 Data transcription
 Data conversion
 Data verification
 Data control
 Data transmission
 Data validation
 Data correction
OUTPUT DESIGN
Outputs from computer systems are required primarily to communicate the results of
processing to users. They are also used to provide a permanent copy of the results for
later consultation. The various types of outputs in general are:
 External Outputs, whose destination is outside the organization.

 Internal Outputs whose destination is with in organization and they are the
 User’s main interface with the computer.
 Operational outputs whose use is purely with in the computer department.
 Interface outputs, which involve the user in communicating directly with
The outputs were needed to be generated as a hard copy and as well as queries to
be viewed on the screen. Keeping in view these outputs, the format for the output is
taken from the outputs, which are currently being obtained after manual processing.
The standard printer is to be used as output media for hard copies.
28
3.4 UML DIAGRAMS
The Unified Modeling language is a standard language for specifying, visualizing,
constructing and documenting the software system and its components. It is a graphical
language, which provides a vocabulary and set of semantics and rules. The UML
focuses on the conceptual and physical representation of the system. It captures the
decisions and understandings about systems that must be constructed. It is used to
understand, design, configure, maintain and control information about the systems.

State Chart Diagrams
State diagram for registration process
33

State diagram for Posting a Project
34

State diagram for placing a Bid
35

State diagram for Manipulating Profile
36

CHAPTER – 4
CODING
37
Administrator.aspx
<%@ Page Language="C#" MasterPageFile="~/MasterPage.master"
AutoEventWireup="true"
CodeFile="Administrator.aspx.cs" Inherits="Administrator" Title="Untitled Page"
%>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1"
runat="Server">
<table style="width: 100%">
<tr>
<td style="width: 40%; height: 302px;">
<asp:Image ID="Image1" runat="server" ImageUrl="~/Images/n810-1.jpg"
Height="360px" Width="491px"></asp:Image>
</td>
<td style="width: 1%; height: 302px;">
</td>
<td style="width: 58%; height: 302px;" valign="top" align="right">
<table>
<tr>
<td>
<asp:LinkButton ID="lblCoder" runat="server"
OnClick="lblCoder_Click">Coder</asp:LinkButton></td><td>|</td>

38
<td>
<asp:LinkButton ID="lblBuyer" runat="server"
OnClick="lblBuyer_Click">Buyer</asp:LinkButton></td><td>|</td>
<td>
<asp:LinkButton ID="lblLogOut" runat="server"
OnClick="lblLogOut_Click">Logout</asp:LinkButton></td><td>|</td>
</tr>
</table>
</td>
</tr>
</table>
</asp:Content>
Adminlogin.aspx
AutoEventWireup="true" CodeFile="AdminLogin.aspx.cs" Inherits="AdminLogin"
Title="Untitled Page" %>
Runat="Server">
<tr>
<td style="width: 40%;">
<img src="Images/untitled.bmp" />
</td>
<td style="width: 1%">

39
</td>
<td style="width: 58%;" valign="top">
<table style="width: 90%; height: 140px;">
<tr>
<td style="width: 50%; text-align: right">
If Your a Coder or Buyer Please <a
href=CoderBuyerLogin.aspx>Login Here</a>
</td>
</tr>
<tr>
<td height="100px"></td>
</tr>
<tr>
<td colspan="2" valign="top" align="center">
<table style="width: 60%; height: 70px" cellspacing="1"
cellpadding="1"
border="1">
<tr>
<td align="center" colspan="2"
style="font-family: Sylfaen; font-size: x-large; font-weight:
bolder; color: #FF3399">
Administrator Login
</td>
</tr>

40
<tr>
<td height="10px"></td>
</tr>
<tr>
<td style="width: 50%">
<asp:Label ID="Label4" runat="server" Font-
Size="16px" Font-Bold="True" Font-Italic="False"
Font-
Names="Georgia">UserName</asp:Label></td>
<td style="width: 50%; text-align: left">
<asp:TextBox ID="TXTID" runat="server"
Width="150px"></asp:TextBox></td>
</tr>
<tr>
<td style="height: 27px">
<asp:Label ID="Label5" runat="server" Font-
Size="16px" Font-Bold="True" Font-Italic="False"
Font-Names="Georgia">Password</asp:Label></td>
<td style="text-align: left; height: 27px;">
<asp:TextBox ID="TXTPWD" runat="server"
TextMode="Password" Width="150px"></asp:TextBox></td>
</tr>
<tr>
<td style="height: 20px" colspan="2">
</td>

41
</tr>
<tr>
<td align="right">
<asp:Button ID="btnLogin" runat="server" Text="Login"
Font-Bold="true"
Font-Size="Medium" Width="80px" Height="27px"
ForeColor="#663300"
OnClick="btnLogin_Click" /></td>
<td align="left">
<asp:Button ID="btncancel" runat="server" Text="Cancel"
Font-Bold="true"
Font-Size="Medium" Width="80px" Height="25px"
ForeColor="#663300"
onclick="btncancel_Click" />
</td>
</tr>
</table>
</td>
</tr>
</table>
</td>
</tr>
</table>
</asp:Content>

42
Homepage.aspx
AutoEventWireup="true"
CodeFile="HomePage.aspx.cs" Inherits="HomePage" Title="Untitled Page" %>
runat="Server">
<tr>
<td style="width: 285px">
<img src="Images/laptop_woman.jpg" runat="server" />
</td>
<td valign="middle" align="center">
<table>
<tr>
<td>
<asp:LinkButton ID="lbCoderBuyer" runat="server"
OnClick="lbCoderBuyer_Click"
BackColor="#CC99FF" Font-Bold="True" Font-Names="Comic Sans MS"
Font-Size="X-Large" Font-Underline="False">Coder /
Buyer</asp:LinkButton>
</td>
</tr>
<tr>
<td>

<asp:LinkButton ID="lbAdministrator" runat="server"
43
OnClick="lbAdministrator_Click"
BackColor="#99CCFF" Font-Bold="True" Font-Names="Comic Sans MS"
Font-Size="X-Large" Font-
Underline="False">Administrator</asp:LinkButton>
</td>
</tr>
</table>
</td>
</tr>
</table>
</asp:Content>

CHAPTER – 5
TESTING
5.1 INTRODUCTION TO TESTING
Software testing is a critical element of software quality assurance and
represents the ultimate review of specification, design and coding. The increasing
visibility of software as a system element and attendant costs associated with a software
failure are motivating factors for we planned, through testing. Testing is the process of
executing a program with the intent of finding an error. The design of tests for software
and other engineered products can be as challenging as the initial design of the product
44
itself.
There of basically two types of testing approaches.
One is Black-Box testing – the specified function that a product has been
designed to perform, tests can be conducted that demonstrate each function is
fully operated.
The other is White-Box testing – knowing the internal workings of the product
,tests can be conducted to ensure that the internal operation of the product
performs according to specifications and all internal components have been
adequately exercised.
White box and Black box testing methods have been used to test this
package. The entire loop constructs have been tested for their boundary and
intermediate conditions. The test data was designed with a view to check for all

the conditions and logical decisions. Error handling has been taken care of by
45
the use of exception handlers.
5.2 TESTING STRATEGIES
Testing is a set of activities that can be planned in advanced and conducted
systematically. A strategy for software testing must accommodation low-level tests that
are necessary to verify that a small source code segment has been correctly implemented
as well as high-level tests that validate major system functions against customer
requirements.
Software testing is one element of verification and validation. Verification
refers to the set of activities that ensure that software correctly implements as specific
function. Validation refers to a different set of activities that ensure that the software
that has been built is traceable to customer requirements.
The main objective of software is testing to uncover errors. To fulfill this
objective, a series of test steps unit, integration, validation and system tests are planned
and executed. Each test step is accomplished through a series of systematic test
technique that assist in the design of test cases. With each testing step, the level of
abstraction with which software is considered is broadened.
Testing is the only way to assure the quality of software and it is an umbrella activity
rather than a separate phase. This is an activity to be preformed in parallel with the
software effort and one that consists of its own phases of analysis, design,
implementation, execution and maintenance.

46
UNIT TESTING:
This testing method considers a module as single unit and checks
the unit at interfaces and communicates with other modules rather than getting into
details at statement level. Here the module will be treated as a black box, which will
take some input and generate output. Outputs for a given set of input combination are
pre-calculated and are generated by the module.
SYSTEM TESTING:
Here all the pre tested individual modules will be assembled to create the
larger system and tests are carried out at system level to make sure that all modules are
working in synchronous with each other. This testing methodology helps in making
sure that all modules which are running perfectly when checked individually are also
running in cohesion with other modules. For this testing we create test cases to check
all modules once and then generated test combinations of test paths through out the
system to make sure that no path is making its way into chaos.
INTEGRATED TESTING
Testing is a major quality control measure employed during software
development. Its basic function is to detect errors. Sub functions when combined may
not produce than it is desired. Global data structures can represent the problems.
Integrated testing is a systematic technique for constructing the program structure while
conducting the tests. To uncover errors that are associated with interfacing the objective
is to make unit test modules and built a program structure that has been detected by
design. In a non - incremental integration all the modules are combined in advance and
the program is tested as a whole. Here errors will appear in an end less loop function. In

incremental testing the program is constructed and tested in small segments where the
47
errors are isolated and corrected.
Different incremental integration strategies are top – down integration,
bottom – up integration, regression testing.

48
TOP-DOWN INTEGRATION TEST
Modules are integrated by moving downwards through the control
hierarchy beginning with main program. The subordinate modules are incorporated into
structure in either a breadth first manner or depth first manner. This process is done in
five steps:
 Main control module is used as a test driver and steps are substituted or all
modules directly to main program.
 Depending on the integration approach selected subordinate is replaced at a time
with actual modules.
 Tests are conducted.
 On completion of each set of tests another stub is replaced with the real module
 Regression testing may be conducted to ensure trha5t new errors have not been
introduced.
This process continuous from step 2 until entire program structure is
reached. In top down integration strategy decision making occurs at upper levels in the
hierarchy and is encountered first. If major control problems do exists early
recognitions is essential.
If depth first integration is selected a complete function of the software may be
implemented and demonstrated.
Some problems occur when processing at low levels in hierarchy is required to
adequately test upper level steps to replace low-level modules at the beginning of the
top down testing. So no data flows upward in the program structure.

49
BOTTOM-UP INTEGRATION TEST
Begins construction and testing with atomic modules. As modules
are integrated from the bottom up, processing requirement for modules subordinate to a
given level is always available and need for stubs is eliminated. The following steps
implements this strategy.
 Low-level modules are combined in to clusters that perform a specific software
sub function.
 A driver is written to coordinate test case input and output.
 Cluster is tested.
 Drivers are removed and moving upward in program structure combines
clusters.
Integration moves upward, the need for separate test driver’s lesions.
If the top levels of program structures are integrated top down, the number of drivers
can be reduced substantially and integration of clusters is greatly simplified.
REGRESSION TESTING
Each time a new module is added as a part of integration as the software
changes. Regression testing is an actually that helps to ensure changes that do not
introduce unintended behavior as additional errors.
Regression testing maybe conducted manually by executing a subset of all test
cases or using automated capture play back tools enables the software engineer to
capture the test case and results for subsequent playback and compression. The
regression suit contains different classes of test cases.

50
OUTPUT SCREENS :
SCREEN 1 :

CHAPTER – 6
PLATFORM/TOOLS USED
6.1 INTRODUCTION TO .NET Framework
The .NET Framework is a new computing platform that simplifies application
development in the highly distributed environment of the Internet. The .NET
Framework is designed to fulfill the following objectives:
 To provide a consistent object-oriented programming environment whether object
code is stored and executed locally, executed locally but Internet-distributed, or
55
executed remotely.
 To provide a code-execution environment that minimizes software deployment and
versioning conflicts.
 To provide a code-execution environment that guarantees safe execution of code,
including code created by an unknown or semi-trusted third party.
 To provide a code-execution environment that eliminates the performance problems
of scripted or interpreted environments.
 To make the developer experience consistent across widely varying types of
applications, such as Windows-based applications and Web-based applications.
 To build all communication on industry standards to ensure that code based on the
.NET Framework can integrate with any other code.

The .NET Framework has two main components: the common language runtime
and the .NET Framework class library. The common language runtime is the foundation
of the .NET Framework. You can think of the runtime as an agent that manages code at
execution time, providing core services such as memory management, thread
management, and Remoting, while also enforcing strict type safety and other forms of
code accuracy that ensure security and robustness. In fact, the concept of code
management is a fundamental principle of the runtime. Code that targets the runtime is
known as managed code, while code that does not target the runtime is known as
unmanaged code. The class library, the other main component of the .NET Framework,
is a comprehensive, object-oriented collection of reusable types that you can use to
develop applications ranging from traditional command-line or graphical user interface
(GUI) applications to applications based on the latest innovations provided by
ASP.NET, such as Web Forms and XML Web services.
The .NET Framework can be hosted by unmanaged components that load the
common language runtime into their processes and initiate the execution of managed
code, thereby creating a software environment that can exploit both managed and
unmanaged features. The .NET Framework not only provides several runtime hosts, but
also supports the development of third-party runtime hosts.
For example, ASP.NET hosts the runtime to provide a scalable, server-side
environment for managed code. ASP.NET works directly with the runtime to enable
Web Forms applications and XML Web services, both of which are discussed later in
56
this topic.
Internet Explorer is an example of an unmanaged application that hosts the
runtime (in the form of a MIME type extension). Using Internet Explorer to host the
runtime enables you to embed managed components or Windows Forms controls in

HTML documents. Hosting the runtime in this way makes managed mobile code
(similar to Microsoft® ActiveX® controls) possible, but with significant improvements
that only managed code can offer, such as semi-trusted execution and secure isolated
57
file storage.
The following illustration shows the relationship of the common language
runtime and the class library to your applications and to the overall system. The
illustration also shows how managed code operates within a larger architecture.
FEATURES OF THE COMMON LANGUAGE RUNTIME
The common language runtime manages memory, thread execution, code
execution, code safety verification, compilation, and other system services. These
features are intrinsic to the managed code that runs on the common language runtime.
With regards to security, managed components are awarded varying degrees of
trust, depending on a number of factors that include their origin (such as the Internet,
enterprise network, or local computer). This means that a managed component might or
might not be able to perform file-access operations, registry-access operations, or other
sensitive functions, even if it is being used in the same active application.
The runtime enforces code access security. For example, users can trust that an
executable embedded in a Web page can play an animation on screen or sing a song, but
cannot access their personal data, file system, or network. The security features of the
runtime thus enable legitimate Internet-deployed software to be exceptionally featuring
rich.
The runtime also enforces code robustness by implementing a strict type- and
code-verification infrastructure called the common type system (CTS). The CTS ensures

that all managed code is self-describing. The various Microsoft and third-party language
58
compilers
Generate managed code that conforms to the CTS. This means that managed
code can consume other managed types and instances, while strictly enforcing type
fidelity and type safety.
In addition, the managed environment of the runtime eliminates many common
software issues. For example, the runtime automatically handles object layout and
manages references to objects, releasing them when they are no longer being used. This
automatic memory management resolves the two most common application errors,
memory leaks and invalid memory references.
The runtime also accelerates developer productivity. For example, programmers
can write applications in their development language of choice, yet take full advantage
of the runtime, the class library, and components written in other languages by other
developers. Any compiler vendor who chooses to target the runtime can do so.
Language compilers that target the .NET Framework make the features of the .NET
Framework available to existing code written in that language, greatly easing the
migration process for existing applications.
While the runtime is designed for the software of the future, it also supports
software of today and yesterday. Interoperability between managed and unmanaged
code enables developers to continue to use necessary COM components and DLLs.
The runtime is designed to enhance performance. Although the common
language runtime provides many standard runtime services, managed code is never
interpreted. A feature called just-in-time (JIT) compiling enables all managed code to
run in the native machine language of the system on which it is executing. Meanwhile,

the memory manager removes the possibilities of fragmented memory and increases
memory locality-of-reference to further increase performance.
Finally, the runtime can be hosted by high-performance, server-side applications,
such as Microsoft® SQL Server™ and Internet Information Services (IIS). This
infrastructure enables you to use managed code to write your business logic, while still
enjoying the superior performance of the industry's best enterprise servers that support
59
runtime hosting.
.NET FRAMEWORK CLASS LIBRARY
The .NET Framework class library is a collection of reusable types that tightly
integrate with the common language runtime. The class library is object oriented,
providing types from which your own managed code can derive functionality. This not
only makes the .NET Framework types easy to use, but also reduces the time associated
with learning new features of the .NET Framework. In addition, third-party components
can integrate seamlessly with classes in the .NET Framework.
For example, the .NET Framework collection classes implement a set of
interfaces that you can use to develop your own collection classes. Your collection
classes will blend seamlessly with the classes in the .NET Framework.
As you would expect from an object-oriented class library, the .NET Framework
types enable you to accomplish a range of common programming tasks, including tasks
such as string management, data collection, database connectivity, and file access. In
addition to these common tasks, the class library includes types that support a variety of
specialized development scenarios. For example, you can use the .NET Framework to
develop the following types of applications and services:
 Console applications.

60
 Scripted or hosted applications.
 Windows GUI applications (Windows Forms).
 ASP.NET applications.
 XML Web services.
 Windows services.
For example, the Windows Forms classes are a comprehensive set of reusable
types that vastly simplify Windows GUI development. If you write an ASP.NET Web
Form application, you can use the Web Forms classes.
CLIENT APPLICATION DEVELOPMENT
Client applications are the closest to a traditional style of application in
Windows-based programming. These are the types of applications that display windows
or forms on the desktop, enabling a user to perform a task. Client applications include
applications such as word processors and spreadsheets, as well as custom business
applications such as data-entry tools, reporting tools, and so on. Client applications
usually employ windows, menus, buttons, and other GUI elements, and they likely
access local resources such as the file system and peripherals such as printers.
Another kind of client application is the traditional ActiveX control (now
replaced by the managed Windows Forms control) deployed over the Internet as a Web
page. This application is much like other client applications: it is executed natively, has
access to local resources, and includes graphical elements.
In the past, developers created such applications using C/C++ in conjunction
with the Microsoft Foundation Classes (MFC) or with a rapid application development
(RAD) environment such as Microsoft® Visual Basic®. The .NET Framework

incorporates aspects of these existing products into a single, consistent development
environment that drastically simplifies the development of client applications.
The Windows Forms classes contained in the .NET Framework are designed to
be used for GUI development. You can easily create command windows, buttons,
menus, toolbars, and other screen elements with the flexibility necessary to
61
accommodate shifting business needs.
For example, the .NET Framework provides simple properties to adjust visual
attributes associated with forms. In some cases the underlying operating system does not
support changing these attributes directly, and in these cases the .NET Framework
automatically recreates the forms. This is one of many ways in which the .NET
Framework integrates the developer interface, making coding simpler and more
consistent.
Unlike ActiveX controls, Windows Forms controls have semi-trusted access to a
user's computer. This means that binary or natively executing code can access some of
the resources on the user's system (such as GUI elements and limited file access)
without being able to access or compromise other resources. Because of code access
security, many applications that once needed to be installed on a user's system can now
be safely deployed through the Web. Your applications can implement the features of a
local application while being deployed like a Web page.

62
6.2 ASP.NET
SERVER APPLICATION DEVELOPMENT
Server-side applications in the managed world are implemented through runtime
hosts. Unmanaged applications host the common language runtime, which allows your
custom managed code to control the behavior of the server. This model provides you
with all the features of the common language runtime and class library while gaining the
performance and scalability of the host server.
The following illustration shows a basic network schema with managed code
running in different server environments. Servers such as IIS and SQL Server can
perform standard operations while your application logic executes through the managed
code.
SERVER-SIDE MANAGED CODE
ASP.NET is the hosting environment that enables developers to use the .NET
Framework to target Web-based applications. However, ASP.NET is more than just a
runtime host; it is a complete architecture for developing Web sites and Internet-distributed
objects using managed code. Both Web Forms and XML Web services use
IIS and ASP.NET as the publishing mechanism for applications, and both have a
collection of supporting classes in the .NET Framework.
XML Web services, an important evolution in Web-based technology, are
distributed, server-side application components similar to common Web sites. However,
unlike Web-based applications, XML Web services components have no UI and are not
targeted for browsers such as Internet Explorer and Netscape Navigator. Instead, XML
Web services consist of reusable software components designed to be consumed by

other applications, such as traditional client applications, Web-based applications, or
even other XML Web services. As a result, XML Web services technology is rapidly
moving application development and deployment into the highly distributed
63
environment of the Internet.
If you have used earlier versions of ASP technology, you will immediately
notice the improvements that ASP.NET and Web Forms offers. For example, you can
develop Web Forms pages in any language that supports the .NET Framework. In
addition, your code no longer needs to share the same file with your HTTP text
(although it can continue to do so if you prefer). Web Forms pages execute in native
machine language because, like any other managed application, they take full advantage
of the runtime. In contrast, unmanaged ASP pages are always scripted and interpreted.
ASP.NET pages are faster, more functional, and easier to develop than unmanaged ASP
pages because they interact with the runtime like any managed application.
The .NET Framework also provides a collection of classes and tools to aid in
development and consumption of XML Web services applications. XML Web services
are built on standards such as SOAP (a remote procedure-call protocol), XML (an
extensible data format), and WSDL ( the Web Services Description Language). The
.NET Framework is built on these standards to promote interoperability with non-
Microsoft solutions.
For example, the Web Services Description Language tool included with the
.NET Framework SDK can query an XML Web service published on the Web, parse its
WSDL description, and produce C# or Visual Basic source code that your application
can use to become a client of the XML Web service. The source code can create classes
derived from classes in the class library that handle all the underlying communication
using SOAP and XML parsing. Although you can use the class library to consume XML

Web services directly, the Web Services Description Language tool and the other tools
contained in the SDK facilitate your development efforts with the .NET Framework.
If you develop and publish your own XML Web service, the .NET Framework
provides a set of classes that conform to all the underlying communication standards,
such as SOAP, WSDL, and XML. Using those classes enables you to focus on the logic
of your service, without concerning yourself with the communications infrastructure
required by distributed software development.
Finally, like Web Forms pages in the managed environment, your XML Web service
will run with the speed of native machine language using the scalable communication of
64
IIS.
ACTIVE SERVER PAGES.NET
ASP.NET is a programming framework built on the common language runtime
that can be used on a server to build powerful Web applications. ASP.NET offers
several important advantages over previous Web development models:
 Enhanced Performance. ASP.NET is compiled common language runtime code
running on the server. Unlike its interpreted predecessors, ASP.NET can take
advantage of early binding, just-in-time compilation, native optimization, and
caching services right out of the box. This amounts to dramatically better
performance before you ever write a line of code.
 World-Class Tool Support. The ASP.NET framework is complemented by a rich
toolbox and designer in the Visual Studio integrated development environment.
WYSIWYG editing, drag-and-drop server controls, and automatic deployment are
just a few of the features this powerful tool provides.

 Power and Flexibility. Because ASP.NET is based on the common language
runtime, the power and flexibility of that entire platform is available to Web
application developers. The .NET Framework class library, Messaging, and Data
Access solutions are all seamlessly accessible from the Web. ASP.NET is also
language-independent, so you can choose the language that best applies to your
application or partition your application across many languages. Further, common
language runtime interoperability guarantees that your existing investment in COM-based
development is preserved when migrating to ASP.NET.
 Simplicity. ASP.NET makes it easy to perform common tasks, from simple form
submission and client authentication to deployment and site configuration. For
example, the ASP.NET page framework allows you to build user interfaces that
cleanly separate application logic from presentation code and to handle events in a
simple, Visual Basic - like forms processing model. Additionally, the common
language runtime simplifies development, with managed code services such as
automatic reference counting and garbage collection.
 Manageability. ASP.NET employs a text-based, hierarchical configuration system,
which simplifies applying settings to your server environment and Web applications.
Because configuration information is stored as plain text, new settings may be
applied without the aid of local administration tools. This "zero local administration"
philosophy extends to deploying ASP.NET Framework applications as well. An
ASP.NET Framework application is deployed to a server simply by copying the
necessary files to the server. No server restart is required, even to deploy or replace
65
running compiled code.
 Scalability and Availability. ASP.NET has been designed with scalability in mind,
with features specifically tailored to improve performance in clustered and

multiprocessor environments. Further, processes are closely monitored and managed
by the ASP.NET runtime, so that if one misbehaves (leaks, deadlocks), a new
process can be created in its place, which helps keep your application constantly
66
available to handle requests.
 Customizability and Extensibility. ASP.NET delivers a well-factored architecture
that allows developers to "plug-in" their code at the appropriate level. In fact, it is
possible to extend or replace any subcomponent of the ASP.NET runtime with your
own custom-written component. Implementing custom authentication or state
services has never been easier.
 Security. With built in Windows authentication and per-application configuration,
you can be assured that your applications are secure.
LANGUAGE SUPPORT
The Microsoft .NET Platform currently offers built-in support for three
languages: C#, Visual Basic, and JScript.
WHAT IS ASP.NET WEB FORMS?
The ASP.NET Web Forms page framework is a scalable common language
runtime programming model that can be used on the server to dynamically generate
Web pages.
Intended as a logical evolution of ASP (ASP.NET provides syntax compatibility
with existing pages), the ASP.NET Web Forms framework has been specifically
designed to address a number of key deficiencies in the previous model. In particular, it
provides:

 The ability to create and use reusable UI controls that can encapsulate common
functionality and thus reduce the amount of code that a page developer has to write.
 The ability for developers to cleanly structure their page logic in an orderly fashion
67
(not "spaghetti code").
 The ability for development tools to provide strong WYSIWYG design support for
pages (existing ASP code is opaque to tools).
ASP.NET Web Forms pages are text files with an .aspx file name extension.
They can be deployed throughout an IIS virtual root directory tree. When a browser
client requests .aspx resources, the ASP.NET runtime parses and compiles the target file
into a .NET Framework class. This class can then be used to dynamically process
incoming requests. (Note that the .aspx file is compiled only the first time it is accessed;
the compiled type instance is then reused across multiple requests).
An ASP.NET page can be created simply by taking an existing HTML file and
changing its file name extension to .aspx (no modification of code is required). For
example, the following sample demonstrates a simple HTML page that collects a user's
name and category preference and then performs a form postback to the originating
page when a button is clicked:
ASP.NET provides syntax compatibility with existing ASP pages. This includes
support for <% %> code render blocks that can be intermixed with HTML content
within an .aspx file. These code blocks execute in a top-down manner at page render
time.
CODE-BEHIND WEB FORMS
ASP.NET supports two methods of authoring dynamic pages. The first is the
method shown in the preceding samples, where the page code is physically declared
within the originating .aspx file. An alternative approach--known as the code-behind

method--enables the page code to be more cleanly separated from the HTML content
68
into an entirely separate file.
INTRODUCTION TO ASP.NET SERVER CONTROLS
In addition to (or instead of) using <% %> code blocks to program dynamic
content, ASP.NET page developers can use ASP.NET server controls to program Web
pages. Server controls are declared within an .aspx file using custom tags or intrinsic
HTML tags that contain a runat="server" attributes value. Intrinsic HTML tags are
handled by one of the controls in the System.Web.UI.HtmlControls namespace. Any
tag that doesn't explicitly map to one of the controls is assigned the type of
System.Web.UI.HtmlControls.HtmlGenericControl.
Server controls automatically maintain any client-entered values between round
trips to the server. This control state is not stored on the server (it is instead stored
within an <input type="hidden"> form field that is round-tripped between requests).
Note also that no client-side script is required.
In addition to supporting standard HTML input controls, ASP.NET enables
developers to utilize richer custom controls on their pages. For example, the following
sample demonstrates how the <asp:adrotator> control can be used to dynamically
display rotating ads on a page.
 ASP.NET Web Forms provide an easy and powerful way to build dynamic Web
UI.
 ASP.NET Web Forms pages can target any browser client (there are no script
library or cookie requirements).
 ASP.NET Web Forms pages provide syntax compatibility with existing ASP
pages.

 ASP.NET server controls provide an easy way to encapsulate common
69
functionality.
 ASP.NET ships with 45 built-in server controls. Developers can also use
controls built by third parties.
 ASP.NET server controls can automatically project both uplevel and downlevel
HTML.
 ASP.NET templates provide an easy way to customize the look and feel of list
server controls.
ASP.NET validation controls provide an easy way to do declarative client or server data
validation.
6.3 C#.NET
ADO.NET OVERVIEW
ADO.NET is an evolution of the ADO data access model that directly addresses
user requirements for developing scalable applications. It was designed specifically for
the web with scalability, statelessness, and XML in mind.
ADO.NET uses some ADO objects, such as the Connection and Command
objects, and also introduces new objects. Key new ADO.NET objects include the
DataSet, DataReader, and DataAdapter.
The important distinction between this evolved stage of ADO.NET and previous
data architectures is that there exists an object -- the DataSet -- that is separate and
distinct from any data stores. Because of that, the DataSet functions as a standalone
entity. You can think of the DataSet as an always disconnected recordset that knows
nothing about the source or destination of the data it contains. Inside a DataSet, much

like in a database, there are tables, columns, relationships, constraints, views, and so
70
forth.
A DataAdapter is the object that connects to the database to fill the DataSet.
Then, it connects back to the database to update the data there, based on operations
performed while the DataSet held the data. In the past, data processing has been
primarily connection-based. Now, in an effort to make multi-tiered apps more efficient,
data processing is turning to a message-based approach that revolves around chunks of
information. At the center of this approach is the DataAdapter, which provides a bridge
to retrieve and save data between a DataSet and its source data store. It accomplishes
this by means of requests to the appropriate SQL commands made against the data store.
The XML-based DataSet object provides a consistent programming model that
works with all models of data storage: flat, relational, and hierarchical. It does this by
having no 'knowledge' of the source of its data, and by representing the data that it holds
as collections and data types. No matter what the source of the data within the DataSet
is, it is manipulated through the same set of standard APIs exposed through the DataSet
and its subordinate objects.
While the DataSet has no knowledge of the source of its data, the managed provider has
detailed and specific information. The role of the managed provider is to connect, fill,
and persist the DataSet to and from data stores. The OLE DB and SQL Server .NET
Data Providers (System.Data.OleDb and System.Data.SqlClient) that are part of the .Net
Framework provide four basic objects: the Command, Connection, DataReader and
DataAdapter. In the remaining sections of this document, we'll walk through each part
of the DataSet and the OLE DB/SQL Server .NET Data Providers explaining what they
are, and how to program against them.

The following sections will introduce you to some objects that have evolved, and
71
some that are new. These objects are:
 Connections. For connection to and managing transactions against a database.
 Commands. For issuing SQL commands against a database.
 DataReaders. For reading a forward-only stream of data records from a SQL Server
data source.
 DataSets. For storing, Remoting and programming against flat data, XML data and
relational data.
 DataAdapters. For pushing data into a DataSet, and reconciling data against a
database.
When dealing with connections to a database, there are two different options:
SQL Server .NET Data Provider (System.Data.SqlClient) and OLE DB .NET Data
Provider (System.Data.OleDb). In these samples we will use the SQL Server .NET Data
Provider. These are written to talk directly to Microsoft SQL Server. The OLE DB
.NET Data Provider is used to talk to any OLE DB provider (as it uses OLE DB
underneath).
Connections:
Connections are used to 'talk to' databases, and are represented by provider-specific
classes such as SqlConnection. Commands travel over connections and
resultsets are returned in the form of streams which can be read by a DataReader
object, or pushed into a DataSet object.

72
Commands:
Commands contain the information that is submitted to a database, and are
represented by provider-specific classes such as SqlCommand. A command can be a
stored procedure call, an UPDATE statement, or a statement that returns results. You
can also use input and output parameters, and return values as part of your command
syntax. The example below shows how to issue an INSERT statement against the
Northwind database.
DataReaders:
The DataReader object is somewhat synonymous with a read-only/forward-only cursor
over data. The DataReader API supports flat as well as hierarchical data. A
DataReader object is returned after executing a command against a database. The
format of the returned DataReader object is different from a recordset. For example,
you might use the DataReader to show the results of a search list in a web page.
DATASETS AND DATAADAPTERS:
DataSets
The DataSet object is similar to the ADO Recordset object, but more powerful, and
with one other important distinction: the DataSet is always disconnected. The DataSet
object represents a cache of data, with database-like structures such as tables, columns,
relationships, and constraints. However, though a DataSet can and does behave much
like a database, it is important to remember that DataSet objects do not interact directly
with databases, or other source data. This allows the developer to work with a
programming model that is always consistent, regardless of where the source data
resides. Data coming from a database, an XML file, from code, or user input can all be

placed into DataSet objects. Then, as changes are made to the DataSet they can be
tracked and verified before updating the source data. The GetChanges method of the
DataSet object actually creates a second DatSet that contains only the changes to the
data. This DataSet is then used by a DataAdapter (or other objects) to update the
73
original data source.
The DataSet has many XML characteristics, including the ability to produce and
consume XML data and XML schemas. XML schemas can be used to describe schemas
interchanged via WebServices. In fact, a DataSet with a schema can actually be
compiled for type safety and statement completion.
DATA ADAPTERS (OLEDB/SQL)
The DataAdapter object works as a bridge between the DataSet and the source
data. Using the provider-specific SqlDataAdapter (along with its associated
SqlCommand and SqlConnection) can increase overall performance when working
with a Microsoft SQL Server databases. For other OLE DB-supported databases, you
would use the OleDbDataAdapter object and its associated OleDbCommand and
OleDbConnection objects.
The DataAdapter object uses commands to update the data source after changes
have been made to the DataSet. Using the Fill method of the DataAdapter calls the
SELECT command; using the Update method calls the INSERT, UPDATE or DELETE
command for each changed row. You can explicitly set these commands in order to
control the statements used at runtime to resolve changes, including the use of stored
procedures. For ad-hoc scenarios, a CommandBuilder object can generate these at run-time
based upon a select statement. However, this run-time generation requires an extra
round-trip to the server in order to gather required metadata, so explicitly providing the

INSERT, UPDATE, and DELETE commands at design time will result in better run-time
74
performance.
 ADO.NET is the next evolution of ADO for the .Net Framework.
 ADO.NET was created with n-Tier, statelessness and XML in the forefront. Two
new objects, the DataSet and DataAdapter, are provided for these scenarios.
 ADO.NET can be used to get data from a stream, or to store data in a cache for
updates.
 There is a lot more information about ADO.NET in the documentation.
 Remember, you can execute a command directly against the database in order to
do inserts, updates, and deletes. You don't need to first put data into a DataSet in
order to insert, update, or delete it.
 Also, you can use a DataSet to bind to the data, move through the data, and
navigate data relationships
6.4 SQL SERVER
A database management, or DBMS, gives the user access to their data and helps
them transform the data into information. Such database management systems include
dBase, paradox, IMS, SQL Server and SQL Server. These systems allow users to
create, update and extract information from their database.
A database is a structured collection of data. Data refers to the characteristics of
people, things and events. SQL Server stores each data item in its own fields. In SQL
Server, the fields relating to a particular person, thing or event are bundled together to
form a single complete unit of data, called a record (it can also be referred to as raw or

an occurrence). Each record is made up of a number of fields. No two fields in a record
75
can have the same field name.
During an SQL Server Database design project, the analysis of your business
needs identifies all the fields or attributes of interest. If your business needs change
over time, you define any additional fields or change the definition of existing fields.
SQL SERVER TABLES
SQL Server stores records relating to each other in a table. Different tables are
created for the various groups of information. Related tables are grouped together to
form a database.
PRIMARY KEY
Every table in SQL Server has a field or a combination of fields that uniquely
identifies each record in the table. The Unique identifier is called the Primary Key, or
simply the Key. The primary key provides the means to distinguish one record from all
other in a table. It allows the user and the database system to identify, locate and refer
to one particular record in the database.
RELATIONAL DATABASE
Sometimes all the information of interest to a business operation can be stored in
one table. SQL Server makes it very easy to link the data in multiple tables. Matching
an employee to the department in which they work is one example. This is what makes

SQL Server a relational database management system, or RDBMS. It stores data in two
or more tables and enables you to define relationships between the table and enables you
76
to define relationships between the tables.
FOREIGN KEY
When a field is one table matches the primary key of another field is referred to
as a foreign key. A foreign key is a field or a group of fields in one table whose values
match those of the primary key of another table.
REFERENTIAL INTEGRITY
Not only does SQL Server allow you to link multiple tables, it also maintains
consistency between them. Ensuring that the data among related tables is correctly
matched is referred to as maintaining referential integrity.
DATA ABSTRACTION
A major purpose of a database system is to provide users with an abstract view
of the data. This system hides certain details of how the data is stored and maintained.
Data abstraction is divided into three levels.
Physical level: This is the lowest level of abstraction at which one describes how the
data are actually stored.

Conceptual Level: At this level of database abstraction all the attributed and what data
are actually stored is described and entries and relationship among them.
View level: This is the highest level of abstraction at which one describes only part of
77
the database.
ADVANTAGES OF RDBMS
 Redundancy can be avoided
 Inconsistency can be eliminated
 Data can be Shared
 Standards can be enforced
 Security restrictions ca be applied
 Integrity can be maintained
 Conflicting requirements can be balanced
 Data independence can be achieved.
DISADVANTAGES OF DBMS
A significant disadvantage of the DBMS system is cost. In addition to the cost
of purchasing of developing the software, the hardware has to be upgraded to allow for
the extensive programs and the workspace required for their execution and storage.
While centralization reduces duplication, the lack of duplication requires that the
database be adequately backed up so that in case of failure the data can be recovered.

FEATURES OF SQL SERVER (RDBMS)
SQL SERVER is one of the leading database management systems (DBMS)
because it is the only Database that meets the uncompromising requirements of today’s
most demanding information systems. From complex decision support systems (DSS)
to the most rigorous online transaction processing (OLTP) application, even application
that require simultaneous DSS and OLTP access to the same critical data, SQL Server
leads the industry in both performance and capability
SQL SERVER is a truly portable, distributed, and open DBMS that delivers unmatched
performance, continuous operation and support for every database.
SQL SERVER RDBMS is high performance fault tolerant DBMS which is specially
designed for online transactions processing and for handling large database application.
ENTERPRISE WIDE DATA SHARING
The unrivaled portability and connectivity of the SQL SERVER DBMS enables
all the systems in the organization to be linked into a singular, integrated computing
78
resource.
PORTABILITY
SQL SERVER is fully portable to more than 80 distinct hardware and operating
systems platforms, including UNIX, MSDOS, OS/2, Macintosh and dozens of
proprietary platforms. This portability gives complete freedom to choose the database
server platform that meets the system requirements.

79
OPEN SYSTEMS
SQL SERVER offers a leading implementation of industry –standard SQL. SQL
Server’s open architecture integrates SQL SERVER and non –SQL SERVER DBMS
with industries most comprehensive collection of tools, application, and third party
software products SQL Server’s Open architecture provides transparent access to data
from other relational database and even non-relational database.
DISTRIBUTED DATA SHARING
SQL Server’s networking and distributed database capabilities to access data
stored on remote server with the same ease as if the information was stored on a single
local computer. A single SQL statement can access data at multiple sites. You can store
data where system requirements such as performance, security or availability dictate.
UNMATCHED PERFORMANCE
The most advanced architecture in the industry allows the SQL SERVER DBMS
to deliver unmatched performance.
SOPHISTICATED CONCURRENCY CONTROL
Real World applications demand access to critical data. With most database
Systems application becomes “contention bound” – which performance is limited not by
the CPU power or by disk I/O, but user waiting on one another for data access . SQL

Server employs full, unrestricted row-level locking and contention free queries to
minimize and in many cases entirely eliminates contention wait times.
80
NO I/O BOTTLENECKS
SQL Server’s fast commit groups commit and deferred write technologies
dramatically reduce disk I/O bottlenecks. While some database write whole data block
to disk at commit time, SQL Server commits transactions with at most sequential log
file on disk at commit time, On high throughput systems, one sequential writes typically
group commit multiple transactions. Data read by the transaction remains as shared
memory so that other transactions may access that data without reading it again from
disk. Since fast commits write all data necessary to the recovery to the log file,
modified blocks are written back to the database independently of the transaction
commit, when written from memory to disk.

CHAPTER – 7
FUTURE SCOPE OF THE PROJECT
 This System being web-based and an undertaking of Cyber Security Division,
needs to be thoroughly tested to find out any security gaps.
 A console for the data centre may be made available to allow the personnel to
monitor on the sites which were cleared for hosting during a particular period.
 Moreover, it is just a beginning; further the system may be utilized in various
other types of auditing operation viz. Network auditing or similar
process/workflow based applications.
81

CHAPTER – 8
REFERENCES
82
 FOR .NET INSTALLATION
www.support.mircosoft.com
 FOR DEPLOYMENT AND PACKING ON SERVER
www.developer.com
www.15seconds.com
 FOR SQL
www.msdn.microsoft.com
 FOR ASP.NET
www.msdn.microsoft.com/net/quickstart/aspplus/default.com
www.asp.net
www.aspfree.com
 System Analysis and Design
Senn
 Database System Design
Elmasree

Mingle box - Online Job seeking System

More Related Content

What's hot (20)

Viewers also liked (6)

Similar to Mingle box - Online Job seeking System (20)

More from Bharat Kalia (10)

Recently uploaded (20)

Mingle box - Online Job seeking System