More Related Content
Similar to Wallcam wireless kit manual (20)
Wallcam wireless kit manual
- 1. V-Con Intelligent Security Pvt. Ltd. B-71 Phase VII, Industrial Area, Mohali -160055, Punjab (India) Toll Free No. 1800 137 0030 I Email : [email protected] www.videoconwallcam.com WIFI KIT WallCam Quick Setup Guide
- 2. Welcome Thank you for purchasing Videocon WallCam product. This manual is designed as a reference for the installation and operation of our CCTV cameras. Before installation and operation please read thefollowinginstructionscarefully! Videocon WallCam WIFI KIT Certification&Compliance: ThisequipmenthasbeentestedandfoundtocomplywithFCC,CE,RoHSandISOstandards. Note:Thisdocumentcontainspreliminaryinformationandsubjecttochangewithoutnotice. PACKINGDETAIL:-Thecontentofthepackageinclude: 1.FullyassembledWIFI/IPCamera-4N/8N 2.WIFINVR–1N 3.ScrewSet–4N/8N 4.CautionSticker-4N 5.PowerAdapterforNVR–1N 6.PowerAdapterforCameras–4N/8N 7.Mouse–1N 8.UserManual–1N 9.Remote-1N Ifanyofthepartismissingordamaged,pleasecontactthedealeryoupurchasedtheWallCamfrom orcallWallCamCustomerService. SafetyCaution: • Pleasedonotputanyfluidcontainerontheproduct. • Pleaseusetheproductinventilatedenvironmentandpreventblockingthevents. • Pleaseusetheoriginalpowersupplytopreventdamagetotheproduct. • Pleaseusetheproductunderitsstandardworkingtemperatureandhumidityi.e.xxxxxxxx. • Dust on PCB may cause short circuit. It is suggested to clean the dust on PCB timely to make the productworkproperly. 1. NVR 2. Camera Installation Instruction of WIFI NVR KIT
- 3. Note: AnetworkcableisrequiredtoconnecttheWirelessNVRtotheWi-FiRouter. Setup The System This NVR has embedded Linux operating system and just like a desktop PC, need to connect with anyTVormonitorbyusingHDMIorVGAinput. 1.InstallantennasforthecamerasandtheNVR. 2.Connect a screen to the NVR via HDMI or VGA cable (HDMI and VGA cable are not included in the kit). 3.PlugtheNVRtoapowersource. 4.PlugtheCamerastoapowersource. 5.Assoonasyouswitchonthepower,thecameraswouldstartfunctioning. 6.PluginthemousetoanUSBportifawiredmouseisincludedinthekit. The default user id is ‘admin’ and password is <blank>. To change the password, right click the mouse>>>gotosystemsetup>>>systemadmin>>>>usermanagement. HDD Installation VideoRecording 1.Record Time: You can set the time periods for video recording in your NVR. Right click the mouse>>>SystemSetup>>>RecordSetup>>>RecordPlan.Thedefaultrecordingtimeis24x7. 2.ManualRecord:Rightclickthemouse>>>ManualRecord.Youcanturnonorofftherecordingofa particular channel as you desire. The Red dot right on the corner means that manual recording is ON. 3.MotionRecord:Motionrecordmeanscertainchannel(s)willberecordedonlywhenmovementis detected. Click right button on the mouse>>>System Setup>>>Record Setup>>>Record Plan. By unselectingtimeandselectingmotion,thechannel(s)willrecordonlywhenmotionisdetected. Video Playback on NVR To enter the video playback system, click the right button on the mouse>>> video playback>>>manual search. Now you can select the specific channel and time and click on playbacktostartthesame. Video Backup With the help of a U disk, it is very convenient and easy to copy a video for backup. Follow the instructions below for taking a video backup. 1.2 USB Ports: Plug U flash drive in the USB port of NVR. Right click on main menu>>>video backup>>>choose backup channel>>>choose video mode>>setup searching time>>>search>>>choose recording file on the list>>>video backup. It supports U-flash disk up to 32GB,recordingvideosathourlyintervals,i.e.onehouratatime 2. 1 USB Port : Right click on main menu>>>video backup>>>choose backup channel>>>choose video mode>>>setup searching time>>>search>>>choose recording file on the list>>>video backup, insert U flash disk within reminding 1 minute, the system will backup recording file to U flashdisk.
- 4. Remote view on Desktop/Laptop 1.IfyourPCandNVRisconnectedwiththesameLAN(whichmeanstheyareconnectedtothesame router).FindtheIPaddressandportnumberofyourNVR. TheIPaddressoftheNVRcanbefound in SystemSetup>>>NetworkSetup. (a.)Openyourinternetexplorerbrowserandgotowww.e-seenet.com (b.)EnterdeviceID,Usernameand password to login.Defaultusernameis‘admin’and password is<blank>. ( C.) Device ID can be found at the right bottom corner of the NVR screen, the status of the NVR shouldbeonline. Live Viewing on Mobile 1.Download the ‘IP PRO’ app from your play store/app store. 2. Enter the NVR’s IP address in your IE browser. For example, (if thehttp://192.168.1.77:100 default web port 80 has been changed to e.g. 100, you will have to add new port when entering the IPaddressinthebrowsere.g. ).http://192.168.1.77:100 3.FollowthefollowingstepsifyouwanttoaccessyourNVRfromdifferentlocation.
- 5. 2. Add the NVR system to your application’s device list. Open the IP PRO app, login with your account and choose trail>>>click on ‘+’ to add device by ID (you can find the same in network setup orrightbottomcornerofNVRscreen)>>>>enterdescriptione.gHomeCamera>>>enterUsername andpasswordandsubmittogetbacktothedevicelist.Nowclickonthedevicetoviewthecameras. •SplitScreen:Inthisoption,youcanselectthesingleormultiplecameraview. •VideoManage:ManageIPcamerasandNVRchannels. •SystemSetup:AllSystemsettings. •VideoPlayback:Playbackrecordedvideos •VideoBackup:Backuprecordedvideos. •Coloradjust:Adjusttheimagesettingofeachcamera. •Manualrecord:shortcuttochangetherecordsettings. •Volume:Adjustvolumeofaudiocameras(worksonlyforaudiocameras). •SetupWizard:Stepbystepguideofgeneralsettings. •FastNetwork:Shortcuttonetworksettings. •ExitSystem:Optionsforlogout,reboot,closescreenoutputandshutdownthesystem. Menu Bar Click right button of your mouse to enter the main menu. The following screen will appear. Video playback on Mobile While viewing the live video streaming, by clicking on playback option, you will enter in playback menu.Theappwillplaythevideoofchannel1butyoucanswitchthesameasperyourdesire. System Setup Click the right button on your mouse>>>select System Setup to enter into this system setup option. 1.General Setup: This enables you to choose a desired Language, adjust the Time or Display resolution, Name of each channel, or even switch from one camera to another. 2.System Admin: This enables you to view or set System Version, System Maintenance including system upgrade, User and password management, Restore to default settings, System log, also providing HDD information. 3. Record Setup : Record pan for each channel video detection. 4. Channel Setup : Allows you to manage channels and cameras. 5. Network Setup : All network related settings are available in this option. Add Cameras: In order to add cameras manual, user can follow following steps:
- 6. The range of the WIFI single will decrease while going through obstacles. Some methods can be applied to extend the WIFI range. Extend WIFI Range Right click on main menu>>>video management to enter the interface. There are two ways to add IP cameras 1) Match code and 2) Auto add. Select auto add option and the cameras will transmit videoimagetoNVRbynetworkcable. If users need to re-match code, camera will transmit video image to NVR wirelessly and IP address > Position the Antenna Correctly. The antenna of the NVR should be put straight up, if not, the WIFI signal will be weak. Refer below images for the same. correct method fault method Note: • For detailed operation introduction, please download detailed manual from our website www.videoconwallcam.com • All the designs, software and user interface are subject to change without prior written notice. • All trademarks and registered trademarks mentioned are the properties of their respective owners. • If there is any uncertainty or controversy, please refer to the final explanation of us. • Please visit our website or contact your local service engineer for more information. • The user interface may slightly vary according to your Smartphone. • All the features and specifications mentioned in this manual may vary from model to model. • For details on warranty, please visit our website www.videoconwallcam.com