fy14_sh-26301-sh4_Aerial_Lift_Safety.pptx

Introduction
About this Power Point Presentation
This PPT was financed 100 percent through federal funds. It is offered to
affected employees and owners of small businesses, including limited-
English, low-literacy and hard-to-reach workers.
Affected employees, small business owners, and their trainers may request
a free copy of this PPT by contacting TCIA, Inc. at 800-733-2622.
This material was produced under grant number SH-26301-SH4 from the
Occupational Safety and Health Administration, U.S. Department of Labor. It does
not necessarily reflect the views or policies of the U.S. Department of Labor, nor
does mention of trade names, commercial products, or organizations imply
endorsement by the U.S. Government.

Introduction
• An aerial lift, for the purpose of this training, is any work
platform that has an articulating boom with a bucket.
• Only qualified employees can operate aerial lifts. Only your employer
can certify that you are qualified operator.
• This training program is based on OSHA and ANSI Z133 safety standards
for arboricultural operations.
• This manual presents general safety awareness, industry safety
standards, and some operational guidelines for aerial lifts.
• It is your responsibility to know and comply with your company’s
policies. If unsure, ask your supervisor. This manual is not intended to
replace or supersede company policies and procedures.

Aerial Device (ANSI Z133 Definition)
Any one of the following types of vehicle-mounted apparatus
used to elevate personnel to jobsites above ground:
• Extensible boom platform
• Aerial ladder
• Articulating boom platform
• Vertical tower
• A combination of any of the above

Chapter 1:
Aerial Lift Safety
• Objectives:
– The employee will:
• Name the most common types of accidents involving
aerial lift devices.
• Interpret the meaning of common warning signs and
labels.
• Identify appropriate personal protective equipment.

Only qualified employees can
operate aerial lift devices.

OSHA Definition
OSHA DEFINITION of a "Qualified person" - a
person who possesses a recognized degree,
certificate, professional standing, or skill and
who, by knowledge, training, and experience,
has demonstrated the ability to deal with
problems relating to the subject matter, the
work, or the project.

Industry Statistics
2014 Fatalities
• Struck-by’s - 42%
• Falls - 31%
• Electrocution - 16% (harmful
environment)
• Transportation - 11%
• Assaults 1%
Courtesy of Dr. John Ball, 2014 data

A Closer Look at Struck-by’s
• 42% of total fatalities (OSHA –Contact
with an object)
–Limb
–Tree
–Chipper
–Saw
–Palm
–Stump Grinder Courtesy of Dr. John Ball, 2014 data

A Closer Look at Falls
• 31% of total fatalities
• From or with tree
– ½ from
– ½ with
– Often fall into tree
• From or with aerial lift
– ½ from
– ½ with
• Misc.
– Truck (Rack/body)
– Ladder Courtesy of Dr. John Ball, 2014 data

A Closer Look at Falls - Aerial Lift
• Working without fall protection/fall
restraint of any kind
• Misuse of the lift
• Tree parts falling on the
booms/basket
• Failure to inspect/maintain the lift
• Falls from headache rack

Exposure to Harmful Environment
• 16% of total fatalities
–Most working aloft
–Some working on ground
•Twice as many Indirect as Direct
Courtesy of Dr. John Ball, 2014 data

Aerial Lift Procedures
• Bucket Operator Warnings
– The bucket does not keep you free from risk of
electrocution
– Insulation provides only a measure of safety
– You can be electrocuted through other paths to
ground:
• If you contact the conductor and the tree at the
same time
• If you contact two conductors at the
same time

Indirect, phase-to-phase contact,
bucket operator

Indirect, phase-to-ground contact,
bucket operator

Failure to observe safety precautions may
result in serious injury or death

Aerial Lift Safety
The triangle shape is the symbol for:
Caution, Warning, Danger
– the Exclamation Point Means “Pay Attention!”
The manufacturer puts
important
messages on the
equipment. It is our job
to read, know, and
understand them!!

Indicates a hazardous
situation. Know what each
word means!
CAUTION, WARNING
DANGER!

The triangle with the exclamation point and a
picture to show you what you are supposed to
use Caution for.
The triangle with an exclamation point will
always remain the same for caution,
but the picture may change.
CAUTION
means you need to be
careful. Follow the
directions on the sign or
you could get hurt.
Symbol Meanings

Symbol Meanings
WARNING more
Serious than
CAUTION! Follow
directions or injury
and possibly death.
picture to show and warn you - WARNING.
always remain the same for warning,

Symbol Meanings
DANGER – the most
Serious safety message!
Serious injury or death
may occur if you do not
follow directions!
picture to show you DANGER is present.
always remain the same for danger,

Aerial Lift Safety Personal
Protective Equipment

Aerial Lift Safety
Personal Protective Equipment (PPE)
1. Fall Protection – full body harness or body belt
with appropriate lanyard connected to designated
anchor point. (OSHA)
2. Helmet – Class E for line clearance,
commercial Arborists can wear ventilated.
All helmets must meet ANSI Z89.1
3. Eye Protection – goggles or safety glasses,
including prescription safety glasses, must
meet ANSI Z87.

Aerial Lift Safety
PPE (cont)
4. Hearing protection – ear muffs of plugs (Chain
Saw use).
5. Leg Protection – may be worn, but is not required in
a bucket.
6. Face Shield – may be worn, but does not substitute
for safety glasses.
7. Sturdy, non-slip boots
8. Close fitting clothing and no jewelry.
Nothing to get caught in equipment.

Chapter 2:
Aerial Lift Inspection, Preparation and Driving
• Objectives:
• Indicate parts to be inspected before and after
operation.
• Learn start-up procedures.
• Understand daily, weekly, monthly and annual
inspection requirements.

Component
Identification
Chapter 2 Aerial Lift Inspection

PRE-USE INSPECTION PROCESS
7-step process to ensure safe operation of a bucket truck

Inspection: Step 2
Conduct visual
inspection of the
unit
Inspection: Step 1
Check oil level in hydraulic reservoir
• Outriggers are up
• Vehicle parked on level surface
• The need to add oil on a regular basis
may indicate a leak

Step 3:
Check
visual and
audible
safety
devices

Step 4:
Inspect the
fiberglass lower
and upper boom
insulator for dirt
and damage
caused by
rubbing wires,
tree sap etc.

Step 5:
Test the outrigger
interlock system (if
equipped)
• Put truck on
level surface and
attempt to raise
and lower
booms without
putting
outriggers down

Inspection Step 6:
• While setting the outriggers make sure
they are working properly
– No leaks
– No signs of wear due to rubbing against
outrigger weldment
CAUTION: when testing the operation of the
interlock system the platform and booms should
be in such a position that no damage
can result from unexpected movement

Inspection Step 7:
• With no one in the platform, operate the
functions from the lower controls
– If functions are operating normally, move to upper
controls
– Test the interlock system for the upper controls
• First, try to operate booms with upper controls with the
hydraulic stop pushed in
• Next, for trucks with interlock trigger, try to operate booms
without squeezing trigger
– If boom movement occur, interlock system has failed – do not
operate until problem is corrected
** While the unit is operating, look for leakage from hydraulic lines and components **

Inspection Step 8:
Test station selector at the lower control
station
– When the station selector is set to the override
position, the upper controls should not work
– The lower controls must always override the
upper control

If the unit is equipped with a secondary stowage
system, remote throttle system, stop/start
system, or battery powered electrical drive,
check these systems for proper operation
Inspection Step 9:

The Federal DOT Requires At Least
The Following To Be Covered
• Service brakes,
including trailer brake
connections
• Parking brake
• Steering mechanism
• Lighting devices and
reflectors
• Tires
• Horn
• Windshield wipers
• Rear vision mirrors
• Coupling devices
• Wheels and rims
• Emergency equipment

Aerial Lift Preparation
• Shop Start-Up Procedures
– Check which equipment is scheduled for use.
– Check oil and coolant levels before starting the engine.
– Start engine as soon as possible for full warm-up.
– Perform visual inspection.
– Perform operational inspection of controls and outriggers.
– Inform supervisor if you find any broken items.
– Check truck storage boxes for all safety devices (i.e.: flags, vests, signs, cones, chocks,
pads) and any other equipment needed.
– Be sure there are no loose tools on top of the lift or in the bucket.
– Be sure all equipment doors are shut and locked.
– Before leaving your shop, be sure you have your DOT med. exam card (if applicable),
driver’s license, work orders, directions to location(s), emergency numbers, and all co-
workers you need to transport before leaving.
– Wear your seat belt.
– Be sure all passengers are wearing their seat belt.

Aerial Lift Preparation
Fueling the Vehicle
• Use correct fuel for equipment
• Never smoke or have an open
flame
• Touch the nozzle to machine
before removing the fuel cap to
prevent static spark
• Keep nozzle or funnel in contact
with fuel tank.
• Wipe up all spills immediately,
before starting Engine.

Aerial Lift Safety
• Daily, Weekly, Monthly, and Annual Lift Inspections
• Consult manufacturer’s instructions for what is to be included in “daily,” “weekly,”
monthly and annual inspections. Your DVIR form covers standard items inspected
on a daily basis to meet USDOT Federal Motor Carrier Safety Regulations (FMCSR)
for the vehicle on which the aerial lift is mounted. Lift manufacturers have
additional inspection items for the lift itself, based on the specific model you are
operating.
• In general, “daily” inspections are conducted by aerial lifts specialists (qualified
operators). Depending on your company, “weekly” inspections may be conducted
by an aerial lift specialist or a qualified maintenance technician. Aerial Lift
Specialists, at a minimum, should be aware of the items that are checked on a
“weekly” basis.
• Monthly and annual inspections are conducted by qualified
maintenance technicians. “Daily” inspections are actually
based on 8 hours of operation and “weekly” inspections are
based on 40 hours of operation.

An Example of “Daily” and
“Weekly” Inspection

Aerial Lift Safety - driving
While driving, parking at job, and returning…
– Know the height clearance of your vehicle!
– Drive defensively – not offensively!
– No tailgating – maintain the right following distance!
– Park your vehicle properly
– Conduct post trip inspection
– Unload equipment properly and Check equipment
storage – locking them always.
– Turn in completed DVIR when back to
office.

Aerial Lift Safety – driving

Aerial Lift Safety - Driving
Use a spotter
when backing
vehicles

Chapter 3 –
General Standards and Guidelines
• Objectives:
• Learn safety standards for working with an aerial lift
• Learn work-site traffic control procedures
• Learn aerial lift positioning and set-up procedures
• Identify good work-site set-up position

What standard(s) apply to you?
(More on this in Chapter 5)

GENERAL STANDARDS
AND GUIDELINES –
ANSI Z133

ANSI Z133 Key Sections
for Aerial Lift Operations
• 3.2 Traffic Control
• 3.3 Emergency Procedures and Readiness
• 3.4 Personal Protective Equipment (PPE)
• 4 Electrical Hazards (All)
• 5.1 Vehicles and Mobile Equipment
• 5.2 Aerial Devices

5.2.2 Aerial devices shall be provided with
an approved point of attached on which to
secure a full-body harness with an energy-
absorbing lanyard or body belt and lanyard
which shall be worn when aloft.

5.2.4 Aerial devices or aerial ladders shall not be
used as cranes or hoists to lift or lower material or
tree parts, unless they were specifically designed by
the manufacturer to do so
5.2.5 Wheel chocks shall be set before using an
aerial device unless the device has no wheels on the
ground or is designed for use without chocks

5.2.3 Booms, buckets, or any other part of the
aerial device shall not be allowed to
make contact or violate minimum
approach distances with energized
electrical conductors, poles or similar
conductive objects.

5.2.6 Units equipped with
outriggers or a stabilizing system
shall be operated in a manner
consistent with manufacturer’s
requirements
5.2.7 The operator shall
ensure adequate clearance
exists and give warning prior to
lowering outriggers. Pads shall
be placed under outrigger feet
when they are needed to ensure
stable footing.

5.2.8 When operating aerial devices, the operator shall look in the
direction the bucket is traveling and be aware of the location of the
booms in relation to all other objects and hazards
5.2.9 Clearances from passing vehicles shall be maintained, or
traffic control shall be provided when booms or buckets are operated
over roads
5.2.10 One-person buckets shall not have more than one person in
them during operations

5.2.11 Hydraulic/pneumatic tools shall be disconnected when
they are being serviced or adjusted, except where manufacture’s
procedure require otherwise.
5.2.12 To avoid flying particles or shipping hydraulic/pneumatic
hoses, pressure shall be released before connections are broken,
except where quick-acting connectors are used. Hydraulic
pneumatic hoses shall never be kinked in order to cut off pressure
5.2.13 No part of the body shall be used to locate or stop
hydraulic leaks
5.2.14 Hoses affecting dielectric characteristics of equipment shall
meet manufacturer’s requirement
5.2.15 The flash point of hydraulic fluid shall meet
the minimum set by the manufacturer

5.2.16 Combine loads shall not exceed rated lift capacities. Load ratings shall
be conspicuously and permanently posted on aerial devices in accordance with
ANSI A92.2.
5.2.17 Electric cables/cords used with electrics saws or lights, or other
conductive material shall not be run from the vehicle to the bucket when
arborists are working in proximity to energized electrical conductors.
5.2.18 aerial devices shall not be moved with an arborist in the platform (for
example, a bucket) except when equipment is specifically designed for such a
operation.
5.2.19 Holes shall not be drilled in buckets or liners.

5.2.20 During aerial device operations, arborists and other
workers who are not qualified line clearance arborists shall
maintain a minimum approach distance from energized
electrical conductors in accordance with Table 2.
Only a qualified line-clearance arborists or qualified line-
clearance arborist trainees using an insulated aerial device
may operate in accordance with minimum approach
distances provided in Table 1.

5.2.21 Arborists and other workers shall be instructed that insulated
aerial buckets do not protect them from other electric paths to the ground,
such as paths through trees, guy wires, or from one phase were to the
second phase wire, any one of which can be fatal.
5.2.22 All underground hazards shall be located proper to operating
aerial lift devices off-road. These hazards could include natural gas tanks,
underground oil tanks and septic systems.

Chapter 3 - Guidelines
• Aerial Lifts
– Need to be tested annually for dielectric
insulating ability
– Inspected and operationally checked prior to use
– Maintenance done as recommended by
manufacturer

Guidelines
• Aerial Lifts . . .
– Insulating parts should be cleaned with non-
filming agents
– Never drill holes in the bottom of the bucket, if
water can drain out, electricity can get in!

Safe Work Practices
• Job Briefing
– You are required to make sure that all workers
understand the hazards associated with their
work as well as their individual responsibilities
– This is required by OSHA and ANSI Z133

Safe Work Practices
• Job Briefing should include:
– Job steps
– Potential hazards
– Specific work assignments
– Action steps needed to avert the hazards
– What PPE is required
• Any new hazard or change in job
site needs to be addressed

Temporary Traffic Control Stds.
• Federal Regulations - All traffic control
devices used for TTC shall conform to the U.S.
Dept. of Transportation MUTCD

• 1st Sign—Attracts the driver’s attention.
• 2nd Sign—Shows what the driver is
approaching.
• 3rd Sign—Shows the driver what must be
done.
Why do you need to know this? This will help the
aerial lift avoid being struck-by a vehicle!!!! Cones
and signage are important for safety!

Distracted Drivers
• Distracted drivers are a
hazard to workers in work
zones.
• Setting up proper advanced
warning signs, taper,
channelizing devices and
buffer space may give a
distracted driver time to
react

fy14_sh-26301-sh4_Aerial_Lift_Safety.pptx

Chapter 3 - TTC Standards
• The primary function of TTC is to provide
reasonably safe and efficient movement of
road users through or around TTC while
providing reasonable protection for the
workers, equipment and emergency
responders.
• Employers must train their employees who
are involved in TTC.

Five Parts of a
Traffic Control
Zone
The traffic control
zone is the area
between the first
advanced warning
sign and the point
beyond the work
space where traffic is
no longer affected.

Aerial Lift Safety
• http://www.youtube.com/watch?v=IgDn8f27xvQ
• Aerial Lift Accident

Chapter 3 - Work Site Procedures
Work-Site Set Up Procedures
1. Ensure the vehicle is positioned on level ground.
2. Set the parking brake.
3. Chock the wheels.
4. Engage the power supply.
5. Set the outriggers. When working on soft ground, place outrigger pads
beneath outriggers to prevent sinking (according to the operator’s manual
instructions).
6. Ensure the vehicle is stable before entering the bucket/platform and raising
or lowering the boom.
7. Check the operator’s manual for additional procedures.

– Always know where the conductors are
– Face the direction of bucket travel
– Do not work with your back to the conductors
– NEVER move the bucket between to conductors
– Inspect and maintain the bucket

• The bucket, boom, tools, and the operator shall
never contact the conductors or violate the
Minimum Approach Distances (more on this
later)
• The truck and any attached equipment shall be
considered energized if contact is made
• If a worker on the ground contacts an energized
vehicle, electrocution may occur

Lower
insulator/isolator
Upper
insulator/isolator

Dielectric
protection is only
within arrows (Left
side only shown
here)

Lower
insulator/isolator
Any electrical
contacts below the
lower isolator will
energize the truck,
ground around the
truck and any
towed equipment.

Workers On The Ground Can Be
Electrocuted If The Boom Comes Into
Contact With An Energized Line…

Chapter 3 - Aerial Lift Guidelines
Read the
Guidelines For
Aerial Lifts,
adapted
from ANSI Z133
Safety Standards.
Make sure you and your co-workers follow
the standards!!!!!!!

• Never modify any part of the lift without permission from the
manufacturer
• A must – a grounder worker must be present, trained and qualified to
make an Aerial rescue from the lower controls.
• Never allow unauthorized users or pedestrians around lift or job site.
• Stop working if a pedestrian approaches or enters the work zone.
• Stop working if there is a malfunction – call your supervisor.
• Stop working if you realize that you cannot complete the job safely or
efficiently With the Aerial lift – call your supervisor.
• Once a bucket operator is aloft, the lower controls
should only be operated by a Ground person
in case of an emergency and with permission
by the operator aloft.

When raising or lowering the
boom, avoid:
• Jerking the controls.
• Obstacles, tree limbs,
power lines, etc.
• Don’t get crushed
between bucket and object.
• Secure tools before moving
bucket.
• Refer to owner’s manual for
crush points on your
equipment.

Aerial Lift Guidelines
• Conduct a work-site and hazard
assessment.
• Conduct a job briefing – all
employees must understand the
assessment and work plan.
• Discuss voice command and
response system to be used –
agree upon it – all of you.
• Use this communications system
while working.
• Ensure that all workers on ground
stay out from under the boom and
bucket.

Chapter 3 - Shut Down Procedures
• Slowly lower the boom to
rest on is supports
• Secure the boom according
to the operator’s manual.
• Raise the outriggers.
• Shut off the power supply.
• Depress the parking brake.
• Remove the key.

• Stow the outrigger pads (if applicable).
• Remove and stow the wheel chocks
before leaving the work site.
• Return all equipment and traffic control
devices to tools boxes.
Shut Down Procedures . . .

Chapter 4 –
Preventing Common Accidents
• Objectives:
• Identify steps to secure yourself in the bucket of the
lift.
• Recognize safe operating procedures to avoid falling
from an aerial lift.
• Identify safe work procedures to avoid being cut by a
chain saw operated from a bucket.
• Indicate how to avoid being struck by
objects while operating the bucket.

Chapter 4 – Common accidents
Common Types of Accidents for Aerial Lift Operators
1. Falls from Bucket – failure to secure yourself in bucket with a full body harness.
Falls over 35 feet usually result in death. Many times an operator is knocked out
of a bucket from being struck by another vehicle or a section of wood hitting the
boom.
2. Chain Saw Cuts – failure to use two hands while operating a Chain Saw.
3. Struck-Bys – you and co-worker injured by branches. Create a work plan before
going aloft. Use voice command or hand signals.
4. Contact Energized Conductors – Always maintain minimum approach
distances.
5. Equipment Failure – inspect and maintain your boom. Most common failure is
breakage of cables.
6. Lift Overturns – not as common, but it does happen. Don’t forget to use the
outriggers.

Preventing Falls from Aerial Lifts

Aerial Lifts
•Personal fall arrest
system, or…
•Fall restraint
system
1910.269(g)(2)(vi)(C)
Fall Protection

Fall Protection*
• Fall restraint - system that prevents the user from falling any
distance, or from reaching “unprotected edge” of a horizontal
surface
• Work positioning - system rigged to allow an employee (lineman)
to be supported on an elevated vertical surface (pole, tower) and
work with both hands free while leaning
• Fall arrest - system used to arrest a fall from a working level, limits
free fall to 6 feet, rigged so that worker cannot contact lower level
* Fall protection requirements vary depending on
which OSHA regulations apply. More in Chapter 5…

Do gear inspection prior to entering the bucket. Make
sure you are properly positioned and attached with a
properly fitted and worn harness and appropriate lanyard.

Compliance Issues/Deadlines
Fall Protection in Aerial Lifts - March 31, 2015
• Personal fall arrest systems must meet the
requirements of Subpart M of OSHA’s
construction standards Part 1926

• 1926.502(d)(16) Personal fall arrest systems, when stopping a fall, shall:
– (i) limit maximum arresting force on an employee to 900 pounds (4
kN) when used with a body belt;
– (ii) limit maximum arresting force on an employee to 1,800 pounds (8
kN) when used with a body harness;
– (iii) be rigged such that an employee can neither free fall more than 6
feet (1.8 m), nor contact any lower level;
• Lanyard length, shock absorbing?
– Free fall distance is defined as the total vertical displacement,
measured at the dorsal attachment, from its starting point to its
stopping point
– Whatever system you choose must also meet the
“arresting force” (AF) requirement.
• Combined tool and body weight of 310 pounds

• Conductors and tree branches do not constitute a “lower level” for
purposes of enforcement
• Lower level stipulation does not kick in during ascent to or descent
from the working position.
• In enforcement, six-foot “free fall” restriction cannot reasonably
anticipate worker being ejected…going UP before going DOWN.
Employer must take reasonable precautions to prevent ejection,
may use lanyards longer than 3’ (4 to 4 ½’ recommended).

Staying Secure Aloft
• General Rules
– Inspect:
• Site
• Trees
• Truck
• Equipment
• PPE

Safe Work Procedures
Prevent Falls

Prevent Saw Cuts
• Use two hands while operating a chain saw
• Use a hand saw, “should” be carrying one in
bucket with you

Avoid Struck-by Injuries from Falling
Objects

Prevent Struck by Injuries
• This includes injuries to you, the bucket operator,
and anyone on the ground.
• A work zone, controlled with flaggers, signs and
cones should be set up as appropriate.
• Keep co-workers from going underneath the bucket.
• Use a command/response communication system
before making the final cut and dropping branches.
• Use Electronic Communication Systems

Keep Pedestrians at a Safe Distance

Minimum Approach Distance (MAD)
• Two components of actual distance
– MAID (Minimum Air Insulation
Distance)
– Ergonomic Factor-allows for
inadvertent movement
• OSHA and ANSI tables
– Distances based on training, voltage
and elevation

• Minimum approach
distance listed in the ANSI
Z133 table
• Based on maximum
nominal operating voltage
in the energized
conductors.
• Line clearance arborist or
line clearance arborists
trainees
Minimum Approach/Separation
Distances

Safe Work Practices
• Work planning when there is an electrical
hazard:
– Inspect trees to determine proximity to all wires
– Consider all wires to be energized with
potentially fatal voltages, this includes;
• Electric
• Fire alarm
• Communication
• Street light

Safe Work Practices
• Coating on wires is weather proofing, not
insulation
– Designed to protect the wire, not you
• Never touch any electrical conductor,
apparatus or any conductive object in contact
with an electrical conductor

Chapter 5 - Additional Recommended Training:
Qualified Line-Clearance Arborists (Tree
Trimmers) and Aerial Rescue
• Objectives:
• Identify what defines line-clearance tree trimming.
• Define the term line-clearance arborist.
• Understand who is and who is not “qualified” to
perform line-clearance tree trimming.
• Understand that Aerial Lift Safety training does not
include aerial rescue training.

Is any part of the tree/brush
being worked on closer than
10’ horizontally to electric
supply lines or equipment?
Yes
No
OSHA General
Industry standards
and ANSI Z133 apply.
Is the work being done for a
utility, and directly associated
with electric power
generation, transmission, or
distribution lines or
equipment?
Yes
No
OSHA Subpart S
applies.
OSHA §1910.269
applies.
Start
Which Standards Apply to
Arborists’ Work?

Aerial Lift Safety
Line-Clearance Tree Trimming
Definition – The pruning, trimming, repairing,
maintaining, removing or clearing of trees, or
cutting brush that is within 10 feet of electric
supply lines and equipment.

Aerial Lift Safety
It’s line clearance when any part of
the tree is closer than 10’ horizontally
to the electric supply lines or
equipment AND work is on behalf of a
utility.

Chapter 5
Qualified Line-Clearance Arborist

Aerial Rescue
• This manual does not address aerial rescue training. Aerial rescue requires
complex training that includes decision-making and knowledge of various
techniques.
• Possible aerial rescue scenarios involving Aerial Lifts
– Aerial Lift Specialists who are qualified to climb may need to use an
aerial lift to access a tree when trying to reach a victim in the
tree.
– Aerial Lift Specialists may need to use an aerial lift to rescue a
rescue victim in a tree.
– Aerial Lift Specialists may need to rescue a victim in a bucket
rescue another lift operator
using the lower controls.

Chapter 6 –
Electrical and Environmental Hazards
• Objectives:
• Identify electrical hazards.
• Understand how electrocution occurs.
• Identify environmental hazards.
• Identify procedures during lightning or storm
emergencies

Aerial Lift Procedures –
Electrical Hazards Safe Work Practices
• Bucket Operator Warnings
– The bucket does not keep you free from risk of
electrocution
– Insulation provides only a measure of safety
– You can be electrocuted through other paths to
ground:
• If you contact the conductor and the tree at the same
time
• If you contact two conductors at the same
time

Chapter 6 – Electrical and
Environmental Hazards

General Precautions To Avoid Being
Electrocuted
• Use extreme caution when operating aerial lifts and tree trimming equipment around utility
lines.
• You must call the utility if there is an electrical hazard, such as a tree limb, closer to the line
than your minimum approach distance.
• Plan ahead to have power lines de-energized or shielded if possible.
• Never use a non-insulated lift device around utility lines.
• Keep far enough away from the utility lines to allow for sway of the boom and sway of the
lines.
• Never drill holes in the bucket or bucket liner; this will decrease the effectiveness of
insulation, if equipped.
• Insulated booms must be dielectrically tested at least once a year.
• Never rely on boom insulation to protect you. An insulated boom may or may not work
based on environmental factors, voltage involved, nature of the contact, condition of boom,
etc.
• Workers on the ground should not touch, lean on, and/or jump on and off the aerial lift
when it is in use around utility lines.

Aerial Lift Safety
Current passing through the
body can cause electrocution
or severe burns.

Aerial Lift Safety
How much is too much?
1 mA can be felt
3-10 mA, muscle contraction and pain
10-40 mA is ‘let go’ threshold
30-75 mA, respiratory paralysis*
100-200 mA, heart clamps tight*
1500 mA, tissue and organs burn*
*Often fatal
Note: Normal skin resistance is around 1000 ohms.
Electrical Current and the Human Body

Heat exhaustion
Heat stroke
Cold exposure
Stinging and biting insects
Animals and mammals
Lightning
Make sure your First Aid
and CPR are up to date.

Heat Illness
Heat exhaustion is one form of heat illness
Symptoms include*:
– Dizziness
– Headaches
– Sweaty skin
– Weakness
– Cramps
– Nausea, vomiting
– Fast heart beat
* People react differently to heat, you may have only a few,
or all, of these symptoms

Heat Illness
Heat stroke is another form of heat illness
Symptoms may include*:
– Red, hot, dry skin
– High temperature
– Confusion
– Convulsions
– Fainting
* People react differently to heat, you may have only a few,
or all, of these symptoms

Heat Illness Prevention
• Drink water every 15 minutes
• Use a water bottle or bladder
system when aloft
• Wear light clothing
• Take breaks in the shade
• Keep an eye on each other
For more resources see OSHA’s website
https://www.osha.gov/SLTC/heatillness/index.html

Lightning
Lightning strikes injure and kill hundreds of people each year. Follow these
precautions to stay safe:
• If you hear thunder, suspend work and lower the bucket. Shut off the
aerial lift and move indoors if possible. Remember that any time you hear
thunder, you may be struck by lightning. Lightning can strike even when
it’s not raining.
• The cab of an enclosed vehicle provides some protection from lightning
but a sturdy building provides the best protection.
• Listen to the radio for weather updates and storm warnings.
If you can’t take cover inside…
• Get to a low space. Lightning strikes the tallest objects.
• Crouch down, but minimize contact with the ground.
• Do not lie flat on the ground. This makes you a larger target.

Lightning (cont.)
• Keep Away From:
– Large, lone trees and towers, fences, telephone poles and utility lines.
– Rivers, lakes, pools and other bodies of water.
– Metal objects, tools, equipment, wire fences
• Lightning Facts:
– A person that is struck by lightning DOES NOT retain an electric charge that can shock
you.
– Lightning can spread as far as 60 feet or more after striking the ground.
– Lightning can travel at speeds of 100,000 mph.
– The temperature of a bolt of lightning can be as high as 50,000° F.
– Lightning CAN strike the same place twice.

Emergency Response
– Aerial Rescue
• Make sure you are practicing and
demonstrating aerial rescue at least once a
year – ANSI Standards.
• The more you practice though, the more you
are prepared – panic kills!
• Prepare to respond now, so you
don’t freak out later!

Safety Begins with Preparation

http://www.tcia.org/training/

fy14_sh-26301-sh4_Aerial_Lift_Safety.pptx

More Related Content

Similar to fy14_sh-26301-sh4_Aerial_Lift_Safety.pptx (20)

More from Ronald Aranha (20)

Recently uploaded (20)

fy14_sh-26301-sh4_Aerial_Lift_Safety.pptx

Editor's Notes