2017 Dwyer Instruments Pressure Instrumentation Quick Selection Guide

2017 Dwyer Instruments Pressure Instrumentation Quick Selection Guide

• 1.
  SELECTIONGUIDE|PRESSURE 1 SERIES DHII DHDH3 A3000 43000 3000MR 3000MRS MP Ranges 0.25 to 100 in w.c./60 Pa to 24.88 kPa (Bi- directional ranges available) 0.25 to 100 in w.c./60 Pa to 24.88 kPa (Bi- directional ranges available) 0.25 to 100 in w.c./60 Pa to 24.88 kPa (Bi- directional ranges available) 0 to 0.25 in w.c./0 to 60 Pa; Up to 0 to 150 in w.c./0 to 30 kPa 0 to 0.5 in w.c. up to 0 to 500 in w.c. 0 to 0.25 in w.c./0 to 60 Pa; Up to 0 to 100 in w.c./0 to 4 kPa 0 to 0.25 in w.c./0 to 60 Pa; Up to 0 to 100 in w.c./0 to 4 kPa 0 to 0.5 in w.c./0 to 125 kPa; Up to 0 to 20 in w.c./0 to 3 kPa Service Air and non-combustible, compatible gases Air and non-combustible, compatible gases Air and non-combustible, compatible gases Air and non-combustible, compatible gases Compatible gases and liquids Air and non-combustible compatible gases Air and non-combustible compatible gases Air and non-combustible, compatible gases Wetted Materials Consult factory Consult factory Consult factory Consult factory Consult factory Consult factory Consult factory Consult factory Housing Aluminum, glass ABS plastic, UL approved 94 V-0 Die cast aluminum case and bezel N/A N/A N/A N/A N/A Switch Type (2) SPDT (2) SPDT (2) SPDT (2) DPDT (2) DPDT SPDT Solid state relay (2) SPDT Accuracy ±0.5% FS ±0.5% FS ±0.5% FS (±1% or ±1.5 for certain ranges) ±2% FS (±3% or 4% for certain ranges) ±3% FS (±4% for certain ranges) ±2% FS (±3% or 4% for certain ranges) ±2% FS (±3% or 4% for certain ranges) ±5% FS Pressure Limits 2 psi (≤2.5 in w.c.); 5 psi (5 to 50 in w.c.); 9 psi (100 in w.c.) 2 psi (≤2.5 in w.c.); 5 psi (5 to 50 in w.c.); 9 psi (100 in w.c.) 2 psi (≤2.5 in w.c.); 5 psi (5 to 50 in w.c.); 9 psi (100 in w.c.) -20˝ Hg to 25 psig (-0.677 bar to 1.72 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar). -20˝ Hg to 500 psig (-0.677 bar to 34.5 bar) -20˝ Hg to 25 psig (-0.677 bar to 1.72 bar) -20˝ Hg to 25 psig (-0.677 bar to 1.72 bar) 30 psig (2.067 bar) Temperature Limits 32 to 140°F (0 to 60°C) 32 to 140°F (0 to 60°C) 32 to 140°F (0 to 60°C) 20 to 120°F (-6.67 to 48.9°C) 20 to 120°F (-6.67 to 48.9°C) 20 to 120°F (-6.67 to 48.9°C) 20 to 120°F (-6.67 to 48.9°C) 20 to 120°F (-6.67 to 49°C) Process Connection 1/8˝ female NPT Compression fitting for 1/8˝ ID tubing or barbed fitting for 3/16˝ ID tubing 1/8˝ female NPT 1/8˝ female NPT 1/4˝ female NPT 1/8˝ female NPT 1/8˝ female NPT Barbed for 3/16˝ ID tubing or 1/8˝ male NPT Enclosure Rating NEMA 4 (IP66) NEMA 4X (IP66) N/A N/A N/A N/A N/A N/A SERIES 2000 DM-1000 2-5000 4000 PTGD PFG2 Ranges -0.05 to 0.2 in w.c./up to -10 to 50 Pa; 0 to 30 psi (0 to 30 kPa) 0.25 to 100 in w.c./60 Pa to 24.88 kPa; (Bi-directional ranges available) 0.5 in w.c. to 5 psi/125 Pa to 3 kPa 0 to 5 in w.c. up to 0 to 20 psid 5 to 150 psid (0.25 to 10 bar) 5 to 25 psid Service Air and non-combustible, compatible gases Air and non-combustible, compatible gases Air and compatible gases Air and compatible gases and oil based liquids Compatible gases and liquids Liquids/gases compatible with SS, GFN, and fluoropolymer Wetted Materials Consult factory Consult factory Consult factory Consult factory Aluminum or 316 SS piston; Buna-N, PTFE, or ceramic magnet seals Aluminum mounting block Housing Die cast aluminum case and bezel Glass filled plastic Glass filled nylon Die cast aluminum with impregnated hard coating Aluminum or 316 SS Glass filled nylon Lens Clear acrylic N/A Clear acrylic N/A Acrylic Polyester Accuracy ±2% FS (±3% or 4% for certain ranges) ±1% FS (2% FS for ranges 1 in w.c. and below) ±5% FS ±3% FS (±2% or 4% for certain ranges) ±2% FS ±5% FS Pressure Limits -20˝ Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar). 2 psi (14 kPa) for ≤5 in w.c. 11 psi (75 kPa) for ≥10 in w.c. 30 psig (2.067 bar) -20˝ Hg to 500 psig (-0.68 to 34.4 bar) Aluminum: 3000 psi (206 bar); SS: 6000 psi (413 bar) 300 psig (20.7 bar) Temperature Limits 20 to 140°F (-6.67 to 60°C) 0 to 140°F (-18 to 60°C) 20 to 120°F (-6.67 to 48.9°C) 20 to 200°F (-6.7 to 93.3°C) N/A 200°F (93°C) Process Connection 1/8˝ female NPT duplicate high and low pressure taps 1/8˝ (3 mm) ID tubing Barbed for 3/16˝ ID tubing or 1/8˝ male NPT 1/4˝ female NPT duplicate high and low pressure taps 1/4˝ female NPT 1/8˝ female NPT Enclosure Rating N/A NEMA 4X (IP66) N/A N/A N/A N/A DIFFERENTIAL PRESSURE PressureGages DIFFERENTIAL PRESSURE PressureGages/Switches 2 PRESSURE|SELECTIONGUIDE These Selection Guides are for quick comparison of similar products. Please refer to the website for complete product information and specifications. ®
• 2.
  SELECTIONGUIDE|PRESSURE 3 LOW DIFFERENTIAL PRESSURE PressureSwitches LOWDIFFERENTIAL PRESSURE PressureSwitches 4 PRESSURE|SELECTIONGUIDE These Selection Guides are for quick comparison of similar products. Please refer to the website for complete product information and specifications. ® SERIES ADPS EDPS 1800 1900 MDS MDA 1831 1640 Set Point Range .08 to 20 in w.c. (20 to 5000 Pa) .08 to 20 in w.c. (20 to 5000 Pa) .07 to 85 in w.c. (.017 to 21 kPa) .07 to 20 in w.c. (.017 to 5 kPa) .5 to 50 in w.c. (.12 to 12.5 kPa) .1 to 100 in w.c. (.25 to 249.1 mbar) 2.5 to 23 in w.c. (.62 to 5.7 kPa) .01 to 12 in w.c. (.003 to 3 kPa) Service Compatible gases Compatible gases Compatible gases Compatible gases Air or compatible fluids on “high side” Air or compatible fluids on “high side” Compatible gases Compatible gases Wetted Materials Silicone, PA 6.6, and Polystyrene Silicone, PA 6.6, and materials UL 94 V-0 rated Consult factory Consult factory Polycarbonate and polyurethane Polycarbonate and polyurethane Consult factory Consult factory Temperature Limits -4 to 185°F (-20 to 85°C) -4 to 185°F (-20 to 85°C) -30 to 180°F (-34 to 82°C) -30 to 180°F (-34 to 82°C) 40 to 150°F (4 to 66°C) 40 to 150°F (4 to 66°C) -30 to 180°F (-34 to 82°C) -30 to 110°F (-34 to 43°C) Pressure Limits 40 in w.c. (10 kPa) 40 in w.c. (10 kPa) 10 psig (69 kPa) 45 in w.c. (11.2 kPa) 15 psig (1 bar) 15 psig (1 bar) 10 psig (69 kPa) 10 psig (69 kPa) Power Requirement None None None None None None None None Repeatability 1% 1% 2% 3% Consult factory Consult factory 4% Consult factory Adjustable Deadband No No No No No No No No Set Point Indication Yes Yes No No No No No Yes Enclosure Rating GP UL 94 V-0 rated GP, WP, or EXP GP, WP, or EXP GP GP GP GP, WP, or EXP Switch Type SPDT SPDT SPDT SPDT SPST NO SPST NO DPDT SPDT Multiple Stages No No No No No No No Yes Process Connection Hose connection for 5/16˝ OD and 1/4˝ ID tubing Hose connection for 5/16˝ OD and 1/4˝ ID tubing 1/8˝ female NPT 1/8˝ female NPT Hose barb for 1/8˝-3/16˝ ID tubing Smooth port for 1/8˝ ID tubing 1/8˝ female NPT 1/8˝ female NPT SERIES 1620 1630 PG 1950 1950G H3 DX Set Point Range .15 to 24 in w.c. (.04 to 6 kPa) .05 to 12 in w.c. (.012 to 3 kPa) 1 in w.c. to 5 psig (.25 kPa to 3.4 bar) .03 to 20 in w.c. (.007 to 5 kPa) .07 to 20 in w.c. (.017 to 5 kPa) 180 in w.c. to 200 psid 2.5 to 75 psi (.17 to 5.2 bar) Service Compatible gases Compatible gases Compatible gases Compatible gases Compatible gases Compatible liquids or gases Compatible liquids or gases Wetted Materials Consult factory Consult factory Fairprene, brass, steel, and aluminum Consult factory Consult factory Aluminum/Nitrile or SS/Fluoroelastomer Brass and fluoroelastomer Temperature Limits -30 to 130°F (-34 to 54°C) -30 to 110°F (-34 to 43°C) -10 to 180°F (-23 to 82°C) -40 to 140°F (-40 to 60°C) 0 to 140°F (-18 to 60°C) -4 to 220°F (-20 to 104°F) 30 to 140°F (-1 to 60°C) Pressure Limits 50 in w.c. (12.41 kPa) 10 psig (69 kPa) Consult factory 45 in w.c. (11.2 kPa) 45 in w.c. (11.2 kPa) 1500 psig (103 bar) 200 psig (13.8 bar) Power Requirement None None None None 24 VDC, 120 or 240 VAC None None Repeatability 1% 1% 1% Consult factory Consult factory Consult factory 2% Adjustable Deadband No No No No No No Yes Set Point Indication No Yes Yes No No No No Enclosure Rating GP, WP, or EXP GP, WP, or EXP GP, WP, or EXP WP and EXP WP and EXP EP WP Switch Type (2) SPDT SPDT SPDT or DPDT SPDT SPDT SPDT or DPDT SPDT Multiple Stages Yes No No No No No No Process Connection 1/8˝ female NPT 1/8˝ female NPT 1/8˝ female and 1/2˝ male NPT 1/8˝ female NPT 1/8˝ female NPT 1/8˝ female NPT 1/4˝ female NPT
• 3.
  SELECTIONGUIDE|PRESSURE 5 LOW DIFFERENTIAL PRESSURE- NON-INDICATING PressureTransmittersandTransducers LOW DIFFERENTIAL PRESSURE - INDICATING PressureTransmittersandTransducers 6 PRESSURE|SELECTIONGUIDE These Selection Guides are for quick comparison of similar products. Please refer to the website for complete product information and specifications. ® SERIES 616KD 677B 668 668B/D 607 607D 608 Ranges 1 in w.c. to 5000 Pa; Bi-directional available. .1 to 25 in w.c.; Bi-directional available .25 to 100 in w.c.; Bidirectional available .1 to 100 in w.c.; Bi-directional available .10 to 25 in w.c.; Bi-directional available .10 to 25 in w.c.; Bi-directional available 0.1 to 25 in w.c.; Bi-directional available Accuracy 616KD-A: ±0.25% FS; 616KD-B: ±1% FS; 616KD-C: ±2% FS ±0.4% FS ±1% FS ±0.8% FS ±0.5% or ±0.25% FS ±0.25% FS ±0.5% or ±0.25% FS Wetted Materials Consult factory 302 SS, glass, nickel, silicone rubber, and brass Consult factory Consult factory Consult factory 302 SS, glass, nickel, silicone rubber, and brass Consult factory Comp. Temp. Limits 20 to 122°F (-6.67 to 50°C) 0 to 185°F (-18 to 85°C) 0 to 150°F (-18 to 65°C) 40 to 170°F (4.4 to 77°C) 35 to 135°F (2 to 57°C) 0 to 170°F (-18 to 77°C) 0 to 160°F (-18 to 71°C) Oper. Temp. Limits 0 to 140°F (-17.8 to 60°C) 0 to 185°F (-18 to 85°C) 0 to 150°F (-18 to 65°C) 0 to 170°F (-18 to 77°C) -20 to 160°F (-29 to 160°C) 0 to 170°F (-18 to 77°C) -20 to 185°F (-28 to 85°C) Output Signal 4 to 20 mA or field selectable 0 to 10/0 to 5/2 to 10/1 to 5 V 4 to 20 mA DC 4 to 20 mA 4 to 20 mA, 0 to 10 VDC, or 0 to 5 VDC 4 to 20 mA DC 4 to 20 mA 4 to 20 mA Elec. Connection Screw-type terminal block Screw-type terminal block Screw-type terminal block Screw-type terminal block Screw-type terminal block Screw-type removable terminal block Screw-type terminal block, Two 1/2˝ female NPT conduit Process Connection Barbed for 1/8˝ and 3/16˝ ID rubber or vinyl tubing 3/16˝ OD barbed brass pressure fittings 3/16˝ OD fitting for 1/4˝ ID tubing 3/16˝ OD barbed brass for 1/8˝ ID push-on tubing Barbed stainless steel for 3/16˝ ID tubing Barbed fittings for 1/8˝ ID tubing 1/4˝ female NPT Enclosure Rating NEMA 1 (IP20) NEMA 4 (IP66) Fire retardant glass filled polyester UL 94 V-0 rated NEMA 2 N/A NEMA 4X (IP66) SERIES 616W DM-2000 605 MS2 ISDP Ranges 6 in w.c. to 2.5 kPa .1 to 5 in w.c.; Bi-directional available Vacuum, .5 to 50 in w.c. (60 to 1500 Pa) 0.1 in w.c. to 28 in w.c. (25 Pa to 6975 Pa) Bi-directional available 0.1 to 100 in w.c.; Bi-directional available Accuracy ±0.25% FS, display accuracy ±0.5% ±1% FS ±0.5% or ±2% FS ±1% or ±2% FS ±0.5% FS Wetted Materials Consult factory Consult factory Consult factory Consult factory Consult factory Comp. Temp. Limits N/A N/A 32 to 120°F (0 to 48.9°C) N/A 32 to 140°F (0 to 60°C) Oper. Temp. Limits 0 to 150°F (-17.8 to 66°C) 20 to 120°F (-7 to 49°C) 20 to 120°F (-6.67 to 48.9°C) 0 to 150°F (-18 to 66°C) 32 to 140°F (0 to 60°C) Output Signal 4 to 20 mA (2-wire), 0 to 5 VDC, or 0 to 10 VDC (3-wire) 4 to 20 mA 4 to 20 mA 4 to 20 mA (2-wire), 0 to 5 VDC, 0 to 10 VDC (3-wire) 4 to 20 mA DC Elec. Connection 3-wire terminal block for 16 to 26 AWG Screw-type terminal block Screw-type terminal block 3-wire terminal block for 16 to 22 AWG M-12 4-pin connector Process Connection Barbed for 1/8˝ and 3/16˝ ID rubber or vinyl tubing 1/8˝ ID tubing 1/8˝ female NPT 3/16˝ I.D. tubing (5 mm ID); Max OD 9 mm 1/8˝ female NPT Enclosure Rating NEMA 4X (IP66) N/A N/A IP66 NEMA 4X (IP66)
• 4.
  SELECTIONGUIDE|PRESSURE 7 WET-WET DIFFERENTIAL PRESSURE PressureTransmittersandTransducers 8 PRESSURE|SELECTIONGUIDE TheseSelection Guides are for quick comparison of similar products. Please refer to the website for complete product information and specifications. ® SERIES 3100 636D 629C 629C-3V 647 645 WWDP Ranges 6 in w.c. to 0-1000 psig 15 to 300 psi 5 psid to 500 psid; 0.5 to 30 bar 5 psid to 500 psid; 0.5 to 30 bar 1 in w.c. to 0-30 psid 1 to 100 psid; Bi-directional ranges available 5 to 250 psi Accuracy ±0.075% FS ±0.5% FS ±0.50% FS ±0.50% FS ±1% FS ±0.25% FS ±1% FS Wetted Materials 316L SS 316L SS 316, 316L SS 316, 316L SS, Brass 360, Copper, Reinforced acetal copolymer Brass, vinyl, glass-filled polyester, silicon, florosilicone 17-4 PH SS, Fluoroelastomer, Silicone Consult factory Comp. Temp. Limits N/A -20 to 180°F (-29 to 82°C) 0 to 175°F (-18 to 79°C) 0 to 175°F (-18 to 79°C) N/A 30 to 150°F (-1 to 65°C) 32 to 130°F (0 to 54°C) Oper. Temp. Limits -40 to 185°F (-40 to 85°C) -40 to 212°F (-40 to 100°C) 0 to 200°F (-18 to 93°C) 0 to 200°F (-18 to 93°C) 32 to 122°F (0 to 50°C) 0 to 175°F (-18 to 80°C) -4 to 185°F (-20 to 85°C) Output Signal 4 to 20 mA or HART® Communication 4 to 20 mA or 1 to 5 VDC 2-wire: 4 to 20 mA; 3-wire: Selectable 0 to 5, 1 to 5, 0 to 10, or 2 to 10 VDC 2-wire: 4 to 20 mA; 3-wire: Selectable 0 to 5, 1 to 5, 0 to 10, or 2 to 10 VDC 4 to 20 mA 4 to 20 mA Selectable 0 to 5, 0 to 10, and 0 to 5 VDC; 4 to 20 mA Elec. Connection (2) 1/2˝ female NPT conduit, screw terminal 2´ (61 cm) cable, 3/4˝ female NPT conduit Screw-type removable terminal block; 1/2˝ female NPT conduit Screw-type removable terminal block; 1/2˝ female NPT conduit Screw-type terminal block Screw-type terminal block 1/2˝ conduit Process Connection 1/4˝ female NPT 1/2˝ female NPT 1/4˝ female NPT 1/4˝ female NPT 1/8˝ female NPT 1/4˝ female NPT 1/8˝ female NPT internal Enclosure Rating NEMA 4X (IP66) NEMA 4 (IP66) NEMA 4X (IP66) Non-LCD designed to meet NEMA 4X (IP66) N/A NEMA 4X (IP66) NEMA 4 (IP66)
• 5.
  SELECTIONGUIDE|PRESSURE 9 SINGLE PRESSURE PressureGages 10 PRESSURE|SELECTIONGUIDE These SelectionGuides are for quick comparison of similar products. Please refer to the website for complete product information and specifications. ® SERIES UGI/UGJ/UGK SG1/SG3 SGX/SGY/SGZ SGP/SGO LPG4/LPG5 SGF 765 7000 7000B Ranges 30˝ Hg to 300 psi (-1 to 20 bar) 30˝ Hg to 300 psi (-1 to 20 bar) SGX: -160 to 235 in w.c. (-4000 to 6000 mm w.c.); SGY/SGZ; -30˝ Hg to 1000 psi (-1 to 70 bar) SGO - 30˝ Hg to 300 psi (-100 to 2000 kPa); SGP -160 to 160 in w.c. (-4000 to 4000 mm w.c.) -235 to 160 in w.c. (-60 to 40 kPa) -235 to 160 in w.c. (-6000 to 4000 mm w.c.) 30˝ Hg to 20,000 psi (-100 to 135,000 kPa) 30 to 3000 psig 30 to 10,000 psig Service Compatible gases/liquids Compatible gases/liquids Compatible gases/liquids Compatible gases/liquids Compatible gases/liquids Compatible gases/liquids Compatible gases/liquids Compatible gases/liquids Compatible gases/liquids Wetted Materials Brass connector, phosphor bronze tube Brass connector, bronze tube Brass, bronze or SS 316L SS chamber with PTFE steel diaphragm Brass, bronze or SS 316/316L SS 316L SS, Bourdon tube 316L SS, Inconel® Bourdon tube Nickel plated brass or 316L SS, Inconel® Bourdon tube Housing Black painted steel 304 SS 304 SS 304 SS LPG4: Drawn Steel; LPG5: Chrome plated 304 SS Phenolic plastic with safety blow-out back Black polycarbonate case Black polycarbonate case Accuracy UGI/UGJ: ±2.5% FS; UGK: ±1.5% FS ±2.5% FS ±1.5 to ±2.5% FS ±1.6% FS LPG4 ±1.5% FS; LPG5 ±3%-2%-3% FS ±1.6% FS (≥15 in w.c.); ±2.5% FS (all other ranges) ±0.5% FS ANSI/ASME (Grade 2A) ±0.5% FS (Grade 2A) 2%-1%-2% FS (Grade A) or 0.5% FS (Grade 2A) Pressure Limits 100% FS 100% FS 100% FS 130% FS 100% FS 100% FS 110 to 125% FS 150% FS 150% FS Temperature Limits -4 to 140°F (-20 to 60°C) -4 to 140°F (-20 to 60°C) SGX: Ambient: -13 to 149°F (-25 to 65°C); SGY/SGZ:-4 to 140°F (-20 to 60°C) Ambient: -13 to 149°F (-25 to 65°C) Ambient: -40 to 140°F (-40 to 60°C); LPG5 -4 to 140°F (-20 to 60°C) Ambient: -13 to 149°F (-25 to 65°C); Process: 212°F (100°C) -40 to 200°F (-40 to 93°C) -65 to 180°F (-53.9 to 82.2°C) -65 to 180°F (-53.9 to 82.2°C) Process Connection UGI/UGJ: 1/8˝ male NPT UGK: 1/4˝ male NPT 1/8˝ male NPT 1/4˝ male NPT 1/2˝ male NPT 1/4˝ male NPT 1/4˝ male NPT 1/4˝ or 1/2˝ male NPT (2) 1/4˝ female NPT 1/2˝ male NPT x 1/4˝ female NPT Enclosure Rating N/A N/A NEMA 3 (IP54) NEMA 3 N/A NEMA 3 (IP54) IP65 (NEMA 4) N/A N/A DIGITAL SINGLE PRESSURE PressureGages SERIES WDG DPGA DPGW DPG-000 DPG-100 DPG-200 Ranges 50 to 5000 psig -30˝ Hg to 500 psig -30˝ Hg to 500 psig -14.7 to 8000 psig -14.7 to 8000 psig 5 to 8000 psig Service Compatible gases/liquids Air and compatible gases Compatible gases/liquids Compatible liquids and combustible gases Compatible liquids and combustible gases Liquids and non-combustible compatible gases Wetted Materials 304L SS 316L SS, silicone sensor 316L SS Type 316L SS Type 316L SS Type 316L SS Housing Fiberglass reinforced PP plastic ABS plastic ABS plastic Polycarbonate front and back cover, anodized aluminum housing, polycarbonate overlay, Buna-N O-rings, 316L SS sensor construction Polycarbonate front and back cover, anodized aluminum housing, polycarbonate overlay, Buna-N O-rings, 316L SS sensor construction Polycarbonate front and back cover, anodized aluminum housing, polycarbonate overlay, Buna-N O-rings, 316L SS sensor construction Accuracy ±0.5% FS (≤1000 psig); ±1% FS (5000 psig) ±1% FS ±1% FS ±0.5% FS ±0.25% FS ±0.25% FS Pressure Limits 200% FS (Burst 300% FS) 200% FS; 30 psig for vacuum models 200% FS; 30 psig for vacuum models 200% FS (≤1000 psi); 5000 psi (3000 psi); 7500 psi (5000 psi) 200% FS (≤1000 psi); 5000 psi (3000 psi); 7500 psi (5000 psi) 200% FS (≤1000 psi); 5000 psi (3000 psi); 7500 psi (5000 psi) Temperature Limits 14 to 140°F (-10 to 60°C) 30 to 120°F (-1 to 49°C) 30 to 120°F (-1 to 49°C) 0 to 130°F (-18 to 55°C) 0 to 130°F (-18 to 55°C) 0 to 158°F (-18 to 70°C) Process Connection 1/4˝ male NPT 1/4˝ male NPT 1/4˝ male NPT 1/4˝ male NPT 1/4˝ male NPT 1/4˝ male NPT Enclosure Rating IP65 N/A N/A NEMA 4/4X (IP66) NEMA 4/4X (IP66) NEMA 4X (IP66)
• 6.
  SELECTIONGUIDE|PRESSURE 11 SERIES EDA DA/DSSA1100 1000W/E A1F A1PS/A1VS Set Point Range 20 to 3000 psig (1.38 to 206 bar) 30˝ Hg VAC to 8000 psig (762 mm Hg VAC to 551 bar) 10 to 500 psig (.7 to 34 bar) 5 to 1400 psig (.48 to 96.5 bar) 2 to 450 psig (.14 to 10.3 bar) 28˝ Hg VAC to 500 psig (711 mm Hg VAC to 34.5 bar) Service Compatible liquids or gases Compatible liquids or gases Compatible liquids or gases Compatible liquids or gases Compatible liquids or gases Compatible liquids or gases Wetted Materials 316 SS Brass, 403 SS, or 316 SS Aluminum, brass, or 316 SS with Buna-N or fluorocarbon Aluminum or 316 SS with polyamide, 316 SS, or Teflon® Fluorocarbon and 316 SS Zinc and Buna-N Temperature Limits 20 to 140°F (-6.6 to 60°C) -10 to 180°F (-23 to 82°C) -30 to 180°F (-35 to 77°C) -30 to 170°F (-35 to 77°C) -40 to 175°F (-40 to 80°C) -31 to 185°F (-35 to 85°C) Pressure Limits 4500 psig (310 bar) 8000 psig (551 bar) 3000 psig (207 bar) 3000 psig (207 bar) 750 psig (51 bar) 600 psig (41 bar) Power Requirement 12 to 30 VDC/AC None None None None None Repeatability 0.5% 1% Consult factory Consult factory Consult factory Consult factory Adjustable Deadband Yes Yes Yes No No No Set Point Indication Yes Yes Yes Yes Yes Yes Enclosure Rating WP GP, WP, or EXP WP and EXP WP or EXP GP or WP GP Switch Type (2) SPDT SPDT or DPDT SPDT or DPDT SPDT or DPDT SPDT SPDT Multiple Stages No Yes No No No No Process Connection 1/4˝ male NPT GP/WP: 1/4˝ male NPT or 1/2˝ male NPT; EXP: 1/2˝ male NPT and 1/4˝ female NPT 1/4˝ or 1/2˝ female NPT 1/4˝ female NPT 1/4˝ female and 1/2˝ male NPT 1/4˝ male NPT SINGLE PRESSURE PressureSwitches SINGLE PRESSURE PressureSwitches 12 PRESSURE|SELECTIONGUIDE These Selection Guides are for quick comparison of similar products. Please refer to the website for complete product information and specifications. ® SERIES APS/AVS A6 AP A2 MVS CXA Set Point Range 28˝ Hg VAC to 500 psig (711 mm Hg VAC to 34.5 bar) .5 to 150 psig (.03 to 10.3 bar) 10 in w.c. VAC to 125 psig (2.5 kPa VAC to 8.6 bar) 5 to 150 psig (.34 to 10 bar) 3 to 330 in w.c. VAC (8 to 822 mbar VAC) 15 to 150 psig (1.0 to 10.3 bar) Service Compatible liquids or gases Compatible liquids or gases Compatible liquids or gases Compatible liquids or gases Compatible liquids or gases Compatible liquids or gases Wetted Materials 17-4 PH SS and 303 SS Polyimide with brass or 304 SS Steel and Buna-N 04 316 SS and Teflon® Kapton® and brass Polycarbonate and polyurethane Silicone, steel, and SS Temperature Limits -65 to 225°F (-54 to 107°C) -40 to 248°F (-40 to 120°C) -30 to 150°F (-35 to 66°C) -40 to 250°F (-40 to 121°C) 40 to 150°F (4 to 66°C) 140°F (60°C) Pressure Limits 750 psig (51 bar) 500 psig (34 bar) 160 psig (11 bar) 500 psig (34 bar) 330 in w.c. (822 mbar) 204 psig (14.1 bar) Power Requirement None None None None None None Repeatability Consult factory ±10% Consult factory 5% 20% ±5 psig (.3 bar) Adjustable Deadband No No No No No Yes Set Point Indication Yes No Yes No No No Enclosure Rating GP GP or WP GP, WP, or EXP GP or submersible GP GP Switch Type SPDT (1) SPST NO and (1) SPST NC SPDT or DPDT SPST SPDT SPST NO or NC Multiple Stages No No No No No No Process Connection 1/8˝ mail NPT 1/4˝ male NPT 1/4˝ female NPT 1/8˝ male NPT Consult factory 1/4˝ female NPT
• 7.
  SELECTIONGUIDE|PRESSURE 13 SERIES 681 644682 672 673 FDT 626/628-GH 628CR 636 IS626 Ranges 1 to 100 psi Vacuum, 15 to 1000 psig 25 to 10,000 psi 10 to 400 in w.c. Compound, 1 to 1000 psi 100 to 10,000 psi Up to 300 psia, 8000 psig, 16 bar abs, 550 bar 30 to 500 psig; 4 to 400 bar 15 to 300 psi 15 to 8000 psig; 15 to 30 psia Accuracy ±0.20% FS ±0.05% FS ±0.13% FS ±0.25% FS ±0.25% FS ±0.5% FS 626: ±0.25% FS; 628: ±1% FS ±1% FS ±0.30% FS ±0.25% FS; 0.5% FS for absolute ranges Wetted Materials 316L SS 17-4 PH SS 17-4 PH SS 318 Duplex SS, Ceramic, fluoroelastomer 17-4 PH SS 316 and 15-5 SS 316, 316L SS Ceramic, 316L SS, fluoroelastomer 316L SS 316 and 316L SS Comp. Temp. Limits 20 to 180°F (-7 to 80°C) -4 to 140°F (-20 to 60°C) -4 to 176°F (-20 to 80°C) -5 to 140°F (-20 to 60°C) 4 to 212°F (-20 to 100°C) 0 to 170°F (-18 to 77°C) 0 to 175°F (0 to 79°C) 0 to 175°F (-18 to 79°C) -20 to 180°F (-29 to 82°C) 0 to 176°F (-18 to 80°C) Oper. Temp. Limits -40 to 260°F (-40 to 125°C) -40 to 185°F (-40 to 85°C) -40 to 260°F (-40 to 125°C) -40 to 212°F (-40 to 100°C) -40 to 260°F (-40 to 125°C) -40 to 200°F (-40 to 93°C) 0 to 200°F (0 to 94°C) 0 to 185°F (-18 to 79°C) -40 to 212°F (-40 to 100°C) 0 to 176°F (-18 to 80°C) Output Signal 4 to 20 mA 0 to 10 VDC (4-wire) or 4 to 20 mA (2-wire) 4 to 20 mA 4 to 20 mA or 0 to 5 VDC 4 to 20 mA 4 to 20 mA or 0 to 5 VDC 4 to 20 mA 4 to 20 mA 4 to 20 mA or 1 to 5 VDC 4 to 20 mA Elec. Connection 15 ft (4.5 m) multi-conduit cable 3ˊ cable or 6-pin male bayonet connector 2 ft (61 cm) multi-conductor cable Large DIN 43650 connector with mating plug 2 ft (61 cm) multi-conductor cable 4-pin Cable, DIN connector, or 4-pin M12 Cable or DIN connector 2 ft (61 cm) cable, 3/4˝ female NPT conduit 3ˊ cable or 4-pin M-12 connector Process Connection 1-1/2˝ or 2˝ sanitary clamp 1/4˝ male NPT 1/4˝ male or female NPT or BSPT 1/4˝-18 male NPT 1/4˝ male NPT 7/16-20 UNF male flush diaphragm; 1/4˝ male NPT 1/4˝ male or female NPT or BSPT 1/4˝ male NPT or 1/4˝ male BSPT 1/2˝ female NPT 1/4˝ male or female NPT or BSPT Enclosure Rating NEMA 4X (IP66) NEMA 4X (IP66) NEMA 4X (IP66) NEMA 4X (IP66) NEMA 4X (IP66) NEMA 4X (IP66) NEMA 4X (IP66) NEMA 4X (IP66) NEMA 4X (IP66) NEMA 4X (IP66) Enclosure Rating WP GP, WP, or EXP WP and EXP WP or EXP GP or WP GP GP GP or WP HIGH SINGLE PRESSURE - NON-INDICATING PressureTransmittersandTransducers HIGH SINGLE PRESSURE - INDICATING PressureTransmittersandTransducers 14 PRESSURE|SELECTIONGUIDE These Selection Guides are for quick comparison of similar products. Please refer to the website for complete product information and specifications. ® SERIES DSGT EDA 626/628-CB IWP 3200G Ranges 30 to 20,000 psig & compound ranges 20 to 3000 psig Up to 300 psia, 8000 psig, 16 bar abs, 550 bar 30 to 1000 psig -14.5 psig to 8500 psig Accuracy ±0.25% FS ±1% FS 626: ±0.25% FS; 628: ±1% FS ±0.5% FS ±0.075% FS Wetted Materials 17-4 SS, 316 SS 316L SS 316, 316L SS 304 and 316 SS 316L SS Comp. Temp. Limits N/A 32 to 122°F (0 to 50°C) 0 to 175°F (0 to 79°C) -22 to 203°F (-30 to 95°C) N/A Oper. Temp. Limits 14 to 140°F (-10 to 60°C) 20 to 140°F (-6.6 to 60°C) 0 to 200°F (0 to 94°C) 32 to 158°F (0 to 70°C) -40 to 185°F (-40 to 85°C) Output Signal 4 to 20 mA 4 to 20 mA, 1 to 6 VDC, 1 to 5 VDC, 0 to 5 VDC, or 0 to 10 VDC 4 to 20 mA 4 to 20 mA 4 to 20 mA or HART® Communication Elec. Connection 3ˊ flying leads Screw-type removable terminal blocks with (2) 1/2˝ female NPT conduit connections Terminal block, 1/2˝ female NPT conduit 1/2˝ female NPT (2) 1/2˝ female NPT conduit, screw terminal Process Connection 1/2˝ male NPT 1/4˝ male NPT, 1/4˝ male BSPT, or 7/16˝ SAE 1/4˝ male or female NPT or BSPT 1/2˝ female NPT 1/2˝ female NPT Enclosure Rating NEMA 4X NEMA 4X (IP66) NEMA 4X (IP66) IP65 NEMA 4X (IP66)