250hadoopinterviewquestions

Menu Search
Hadoop Online Tutorials
Author
#1825REPLY
Hadoop Eco System › Forums › Hadoop Discussion Forum › 250 Hadoop Interview Questions and answers for Experienced Hadoop developers
Tagged: Flume Interview Questions and answers for freshers experienced, Hadoop Interview Questions and answers for experienced freshers, HBase Interview Questions and
answers for experienced freshers, Hunk Interview Questions and answers for freshers, Mapreduce Interview Questions and answers for experienced freshers, Pig Interview
Questions and answers for experienced, Sqoop Interview Questions and answers for freshers and experienced, Tableau Interview Questions and answers
Viewing 1 post (of 1 total)
250 Hadoop Interview Questions and answers for Experienced Hadoop developers
This topic contains 0 replies, has 1 voice, and was last updated by Siva 1 year, 3 months ago.
Posts
November 15, 2014 at 3:40 pm
Siva
Keymaster
Hi All, Below are a list of 250 Hadoop Interview Questions asked on various drives and Interviews (Infy. CTS,
TCS..etc) combined together. Due to time constraint and some of the questions are already included in Interview
Questions Category on this site (Across various posts), So, I am just drafting down the questions here. Please refer the
Interview Questions Category for answers to the most of the questions. If you didn’t answer to any of the questions
listed below you can raise a request in this forum to get answers to any particular question.
Hadoop Cluster Setup:
1. How will you add/delete a Node to the existing cluster?
 Log in Register 
PDFmyURL - online url to pdf conversion

A) Add: Add the host name/Ip address in dfs.hosts/slaves file and refresh the cluster with $hadoop dfsamin -
refreshNodes
Delete: Add the hostname/Ip address to dfs.hosts.exclude/remove the entry from slaves file and refresh the cluster
with $hadoop dfsamin -refreshNodes
2. What is SSH? What is the use of it In Hadoop?
A) Secure Shell.
3. How will you setup Password-less SSH?
A) search in this site
4. How will you format the HDFS? How frequently it will be done?
A) $hadoop namnode -format.
Note: Format had to be done only once that to during initial cluster setup.
5. How will you manage the Log files generated in Hadoop cluster?
A)
6. Do you know about cron jobs? How will you Setup?
A) In Ubuntu, go to the terminal and type:
$ crontab -e
this will open our personal crontab (cron configuration file), the first line in that file explains it all, In every line we
can define one command to run, and the format is quite simple. So the structure is:
minute hour day-of-month month day-of-week command
For all the numbers you can use lists eg, 5,34,55 in the first field will mean run at 5 past 34 past and 55 past what
ever hour is defined.
7. What is the role of /etc/hosts file in setting up of HDFS cluster?

A) For hostname to Ip address maping
8. What is dfsadmin command in Hadoop?
9. If one of the data node is failed to start on the cluster how will you come to know? And what are the necessary
actions to be taken now ?
A)Via HDFS web UI, we can see no of decommissioned nodes and we need to rebalance the cluster now
10. What is the impact if namenode fails and what are the necessary action items now?
A) Entire hdfs will be down and we need to restart the namenode after copying fsimage and edits from
secondaryNN
11. What is Log4j?
A) Logging Framework
12. How do we set logging level for hadoop daemons/commands?
A) In log4j.properties or in hadoop-env.sh file, hadoop.root.logger=INFO,console (WARN,DRFA)
13. Is there any impact on mapreduce jobs if there is no mapred-site.xml file created in HADOOP_HOME/conf
directory but all the necessary properties are difined in yarn-site.xml?
A) no
14. How does Hadoop’s CLASSPATH plays vital role in starting or stopping in hadoop daemons.
A) Classpath will contain list of directories containing jar files required to start/stop daemons for example
HADOOP_HOME/share/hadoop/common/lib contains all the common utility jar files.
15. What is the default logging level in hadoop?
A) hadoop.root.logger=INFO,console.
16. What is the ‘hadoop.tmp.dir’ configuration parameter default to ?
A) It is user.name. We need a directory that a user can write and also not to interfere with other users. If we didn’t

include the username, then different users would share the same tmp directory. This can cause authorization
problems, if folks’ default umask doesn’t permit write by others. It can also result in folks stomping on each other,
when they’re, e.g., playing with HDFS and re-format their filesystem.
17. How do we verify the status and health of the cluster?
A) Either by HDFS Web UI at http://namenode:50070/ or by $ hadoop dfsadmin -report.
18. What is the reason for the frequent exception connection refused in hadoop?
A) If there is no configuration error at client machine or namenode machine, a common cause for this is the
Hadoop service isn’t running. If there is problem with Check that there isn’t an entry for our hostname mapped to
127.0.0.1 or 127.0.1.1 in /etc/hosts.
19. How do we set a configuration property to be unique/constant across the cluster nodes and no slave nodes should
override this?
A) We can achive this by defining this property in core/hdfs/mapred/yarn-site.xml file on namenode with final tag
as shown below.
<name>mapreduce.task.io.sort.mb</name>
<value>512</value>
<final>true</final>
20. Does the name-node stay in safe mode till all under-replicated files are fully replicated?
A)No. The name-node waits until all or majority of data-nodes report their blocks. But name-node will stay in safe
mode until a specific percentage of blocks of the system is minimally replicated. minimally replicated is not fully
replicated.
More Hadoop Interview Questions at below links:
http://hadooptutorial.info/category/interview-questions/hadoop-interview-questions-for-experienced-and-freshers/
http://hadooptutorial.info/category/interview-questions/mapreduce-interview-questions/
http://hadooptutorial.info/category/interview-questions/hbase-interview-questions-for-experienced-freshers/

http://hadooptutorial.info/category/interview-questions/hive-interview-questions/
http://hadooptutorial.info/category/interview-questions/pig-interview-questions-for-experienced-and-freshers/
http://hadooptutorial.info/category/interview-questions/sqoop-interview-questions-and-answers/
HDFS Interview Questions and Answers:
1. What is Default replication factor and how will you change it at file level?
2. Why do we need replication factor > 1 in production Hadoop cluster?
3. How will you combine the 4 part-r files of a mapreduce job?
A) Using hadoop fs -getmerge
4. What are the Compression techniques in HDFS and which is the best one and why?
5. How will you view the compressed files via HDFS command?
A) hadoop fs -text
6. What is Secondary Namenode and its Functionalities? why do we need it?
7. What is Backup node and how is it different from Secondary namenode?
8. What is FSimage and editlogs and how they are related?
9. what is default block size in HDFS? and why is it so large?
10. How will you copy a large file of 50GB into HDFS in parllel
A) distcp
11. what is Balancing in HDFS?
12. What is expunge in HDFS ?

A) Trash empty
13. What is the default uri for HDFS WEB UI? Can we create files via HDFS WEB UI?
A) namenode:50070. No. It is read only
14. How can we check existence of non zero length file in HDFS commands
A) hadoop fs -test command
15. What is IOUtils in HDFS API and how is it useful?
16. Can we archive files in HDFS? If yes, how can we do that?
A) hadoop archive -archiveName NAME -p <parent path> src dest
17. What is safemode in Hadoop and what are the restrictions during safemode?
18. What is rack awareness in hadoop?
19. Can we come out of safe mode manually, if yes how?
A) $ hadoop dfsadmin -safemode enter/get/leave
20. Why block size in hadoop is maintained as very big compared to traditional block size?
21. What are Sequence files and how are they different from text files?
22. What is the limitation of Sequence files?
A) supports only java, no other API
23. What are Avro files ?
24. Can an avro file created in Java in machine 1 can be read on machine with Ruby API?
A) Yes
25. Where does the schema of an Avro file is store if the file is transferred from one host to another?
A) in the same file itself as a header section

A) in the same file itself as a header section
26. How do we handle small files in HDFS?
A) merge into sequence/avro file or archive them into har files.
27. What is delegation token in Hadoop and why is it important?
28. What is fsck in Hadoop?
29. Can we append data records to an existing file in HDFS?
A) Yes by command $ hdfs dfs -appendToFile … Appends single src, or multiple srcs from local file system to the
destination file system. Also reads input from stdin and appends to destination file system.
30. Can we get count of files in a directory on HDFS via command line?
A) Yes by using command $ hdfs dfs -count hdfs://NN/file1
31. How do we achieve security on Hadoop cluster?
A) With Kerberose
32. Can we create multiple files in HDFS with different block sizes?
Yes. HDFS provides api to specify block size at the time of file creation. Below is the method signature:
public FSDataOutputStream create(Path f, boolean overwrite, int bufferSize, short replication, long blockSize)
throws IOException;
33. What is the importance of dfs.namenode.name.dir?
It contains the fsimage file for namenode, it should be configured to write to atleast two filesystems on different
physical hosts, namenode and secondary namenode, as if we lose fsimage file we will lose entire HDFS file
system and there is no other recovery mechanism if there is no fsimage file available.
34. What is the need for fsck in hadoop?
it can be used to determine the files with missing blocks.

35. Does HDFS block boundaries be between records or across the records?
No, HDFS does not provide record-oriented boundaries, So blocks can end in the middle of a record.
Mapreduce Interview Questions and Answers:
1. What is Speculative execution?
2. What is Distributed Cache?
3. WorkFlow of MapReduce job?
A) map,combiner,reducer,shuffle,partitioner
4. How will you globally sort the output of mapreduce job?
A) totalorder partitioner
5. Difference between map side and reducer side Join?
[adsense]
6. What is Map reduce chaining?
7. How will You pass parameters to mapper or reducer?
8. How will you create custom key and value type’s?
9. Sorting based on any column other than Key?

9. Sorting based on any column other than Key?
10. How will you create custom input formats?
11. How will you process huge number of small files in MR job?
A) After converting into sequence file/avro file
12. Can we run Reducer without Mapper?
A) Yes in this Identity mapper will be run in the back ground to copy the input to reducer
13. Whether mapper and reducer tasks run in parallel? If no, why see some times as (map 80%,reduce 10%)?
A) No, its due to data copy phase.
14. How will you setup a custom counter to detect bad records in the input?
A) context.getcounter.enumvalue
[adsense]
15. How will you schedule mapreduce Jobs?
A) Through Oozie or Azkaban
16. what is combiner?Tell me one scenario where it is not suitable?
A) for aggregate functions
17. How will you submit mapreduce job through command line?
18. How will you kill a running mapreduce job?
19. For a failed mapreduce job how will trace for the root cause
A) Yarn WEB UI ? logs –> Userlogs ? Application ID container ? Syserr/syslog/
20. What will you do if a mapreduce job failed with Java heap space error message?
A) In HADOOP_CLIENT_OPTS or JAVA_CHILD_OPTS increase Xmx property
21. How many map tasks & reduce tasks will run on each datanode by default

A) 2 map tasks and 1 reduce task
22) What is the minimum RAM capacity needed for this datanode?
As there 3 jvms running for 3 tasks, 1 data node daemon also runs, so, it is needed at least 4 GB RAM, assuming that
at least 1GB can be asssigned for each YARN task.
22. What is difference between Mapreduce and YARN?
23. What is Tez framework?
A) An alternative framework for mapreduce, it can be used in Yarn in place of mapreduce
24. What is the difference between Tez and Mapreduce ?
A) Tez is at least 2 times faster than Mapreduce
25. What is input split, input format and record reader in Mapreduce programming?
26. Does Mapreduce support processing of Avro files ? If yes, what is the main classes of the API?
27. How will you process a dataset in JSON format in mapreduce job?
A) JSONObject class can be used to parse the JSON records in the dataset
28. Can we create multi level directory structure (year/month/date) in Mapreduce based on the input data?
A) yes by using multipleoutputs
29. What is the relation between TextOutputFormat and KeyValueTextInputFormat?
A) second one is used to read the files created by first one
30. What is LazyOutpuFormat in Mapreduce and why do we need it?
A) creates output files if data is present
31. How do we prevent file splitting in Mapreduce ?
A) by returning false from isSplittable method on our custom InputFormat Class

32. What is the difference between Writable and WritableComparable interfaces? And what is sufficient for value type
in MR job?
A) writable
33. What is the Role of Application Master in running Mapreduce job through YARN?
34. What is Uber task ?
35. What are IdentityMapper & IdentityReducer classes?
36. How do we create jar file with .class files in a directory through command line?
37. What is the default port for YARN Web UI?
A) 8088
38. How can we distribute our application’s jars to all of the nodes in the YARN cluster that need it?
39. How do We include native libraries in YARN jobs?
A) by using -Djava.library.path option on the command or else by setting LD_LIBRARY_PATH in .bashrc file.
40. What is the default scheduler inside YARN framework for starting tasks?
A) CapacityScheduler
41. How do we handle record bounderies in Text files or Sequence files in Mapreduce Inputsplits?
In Mapreduce, InputSplit’s RecordReader will start and end at a record boundary. In SequenceFiles, every 2k
bytes has a 20 bytes sync mark between the records. These sync marks allow the RecordReader to seek to the
start of the InputSplit, which contains a file, offset and length and find the first sync mark after the start of the split.
The RecordReader continues processing records until it reaches the first sync mark after the end of the split. Text
files are handled similarly, using newlines instead of sync marks.
42. Some times mapreduce jobs will fail if we submit the same jobs from a different user? What is the cause and how
do we fix these?

A) It might be due to missing of setting mapreduce.jobtracker.system.dir
43. How to change the default location of mapreduce job’s intermediate data ?
A) by chaning the value in mapreduce.cluster.local.dir
44. If a map task is failed once during mapreduce job execution will job fail immediately?
A) No it will try restarting the tasks upto max attempts allowed on map/reduce tasks, by default it is 4
Pig Interview Questions and answers:
1. How will load a file into pig?
2. What are the complex data types in pig?
3. What is outer bag?
4. Load an emp table file with columns id, name, deptid, description. Display name and id where deptid=””;
5. How will you write custom UDFs?
6. What is the difference between inner bag and outer bag?
7. What is a tuple?
8. What is the difference between FOREACH and FILTER?

9. What is the difference between local mode and mapreduce mode?
10. What is the difference between GROUP BY and JOIN BY in Pig?
11. How many reduce tasks will be run if we specify both GROUP BY and ORDER BY clauses in the same pig script?
12. What is DISTINCT operator?
13. Difference between UNION, JOIN and CROSS ?
14. How do we sort records in descending order in a dataset in Pig? (ORDER DESC/ASC)
15. What is the difference between GROP and COGROUP?
16. What is the difference between STORE and DUMP commands?
17. How will you debug a pig script ?
A) set debug on
18. Can we run basic Hadoop fs commands in Grunt shell?
A) yes
19. Can we run Unix shell commands from Grunt shell itself ?
A) yes by using sh command
20. Can we submit pig scripts in batch mode from grunt shell?
A) yes by using run/exec command
21. What is the difference between run and exec commands in grunt shell?
A) Run will execute the pig script in the same grunt shell but exec will submit in a new grunt shell
22. What are diagnostic operators in Pig?
23. What is the difference between EXPLAIN, ILLUSTRATE and DESCRIBE?
24. How do we access a custome UDF function created in Pig?

24. How do we access a custome UDF function created in Pig?
A) by using REGISTER and DEFINE functions it will be available in pig session
25. What is DIFF function in pig?
26. Can we do random sampling from a large dataset in pig?
A) SAMPLE command
27. How can we divide records of a single dataset into multiple datasets by using any criteria like country wise?
A) using SPLIT command
28. What is the difference between COUNT and COUNT_START functions in pig?
A) COUNT_START includes null values also in counting whereas COUNT will not
29. What are PigStorage & HBaseStorage ?
30. What is the use of LIMIT in pig?
31. What is the difference between Mapreduce and Pig and can we use Pig in all scenarios where we can write MR
jobs?
A) No
Hive Interview Questions and Answers:
1. Does hive support record level operations?
2. In hive table can we change string DT to Int DT?
3. Can we rename a Table in Hive? if Yes, How?
4. What is metastore? how will you start the service?
5. WHat is Serde in Hive?Example?
6. Difference between Hive and Hbase?

7. How to print column name of a table in hive query result?
8. How will you know whether a table is external or managed?(desc extended)
9. What is Hive thrift server?
10. What is the difference between local metastore and embedded metastore?
11. How do we load data into Hive table with SequenceFile format from text file on local file system.
12. What is HCatalog?
13. How is HCatalog is different from Hive?
14. What is WebHCat?
15. How do we import XML data into Hive?
16. How do we import CSV data into Hive?
17. How do we import JSON data into Hive?
18. What are dynamic partitions?
19. Can a Hive table contain data in more than one format?
20. How do I import Avro data into Hive?
21. Does Hive have an ODBC driver?
A) Yes cloudera provides ODBC drivers for Hiveserver
22. Is HiveQL case sensitive?
A) no
23. Does Hive support Unicode?
A) Yes we can use Unicode string on data/comments, but cannot use for database/table/column name.

24. Can a Hive table contain data in more than one format?
25. Is it possible to set the data format on a per-partition basis?
26. What are dynamic partitions?
27. Does Hive have a JDBC Driver?
A) Yes, The driver is ‘org.apache.hadoop.hive.jdbc.HiveDriver’.
It supports two modes: a local mode and a remote one.
In the remote mode it connects to the hive server through its Thrift API. The JDBC url to use should be of the form:
‘jdbc:hive://hostname:port/databasename’. In the local mode Hive is embedded. The JDBC url to use should be
‘jdbc:hive://’.
28. How can we import fixed-width data into Hive?
[adsense]
29. How can we import ASCII logfiles (HTTP, etc) into Hive?
30. When running a JOIN query, what is the idea to solve out-of-memory errors.
A)This is usually caused by the order of JOIN tables. Instead of “FROM tableA a JOIN tableB b ON …”, try “FROM
tableB b JOIN tableA a ON …”. NOTE that if we are using LEFT OUTER JOIN, we might want to change to
RIGHT OUTER JOIN. This trick usually solve the problem – the rule of thumb is, always put the table with a lot of
rows having the same value in the join key on the rightmost side of the JOIN.
31. How many times Tez engine runs faster than MR engine in Hive?
32. How much time each Tez session will be active?
Hbase Interview Questions and answers :
1. What are the Catalog tables in Hbase?
2. What is Zookeeper role in hbase architecture?
3. How will you drop a table in Hbase?

4. Do you know Hive on hbase? how will you achive it?(Hbasestorage handler)..If we delete a table from hive will it
effect on hbase table?
A) yes
[adsense]
5. How will you load bulk data of 50GB file into Hbase table?
6. Limitations of Hbase?(no support for sql syntax, indexing, joins,..)
7. Difference between Hbase and Hdfs?
8. How do we integrate HBase and Hive?
9. How can we add/remove a node to HBase cluster?
A)By Adding/removing an entry in HBASE_CONF_DIR/regionservers file
10. Can we safely move the hbase rootdir in hdfs?
A) Yes. HBase must be down for the move. After the move, update the hbase-site.xml across the cluster and
restart.
11. Can we safely move the master from node A to node B?
A) Yes. HBase must be down for the move. After the move, update the hbase-site.xml across the cluster and
restart.
12. How do we fix OutOfMemoryExceptions in hbase?
A) Hbase uses a default of 1 GB heap size. By increasing this at HBASE_HEAPSIZE environment variable in
${HBASE_HOME}/conf/hbase-env.sh we can solve these error messages.
13. How can we change logging level in HBase?
A) In log4j.properties file we can set logging level as DEBUG– log4j.logger.org.apache.hadoop.hbase=DEBUG
— and restart our cluster or in hbase-env.sh file.

[adsense]
14. What ports does HBase use?
A) hbase runs the master and its informational http server at 60000 and 60010 respectively and regionservers at
60020 and their informational http server at 60030.
15. Some times HBase is ignoring HDFS client configuration such as dfs.replication. what is the cause?
A) If we made HDFS client configuration on our hadoop cluster, HBase will not see this configuration unless:
We Add a pointer to HADOOP_CONF_DIR to CLASSPATH in hbase-env.sh or symlink your hadoop-site.xml
from the hbase conf directory.
Add a copy of hadoop-site.xml to ${HBASE_HOME}/conf, or If only a small set of HDFS client configurations, add
them to hbase-site.xml
The first option is the better of the three since it avoids duplication.
16. What is the maximum recommended cell size?
A) A rough rule of thumb, with little empirical validation, is to keep the data in HDFS and store pointers to the data
in HBase if you expect the cell size to be consistently above 10 MB. If you do expect large cell values and you still
plan to use HBase for the storage of cell contents, you’ll want to increase the block size and the maximum region
size for the table to keep the index size reasonable and the split frequency acceptable.
17. Why can’t I iterate through the rows of a table in reverse order?
A) Because of the way HFile works: for efficiency, column values are put on disk with the length of the value
written first and then the bytes of the actual value written second. To navigate through these values in reverse
order, these length values would need to be stored twice (at the end as well) or in a side file. A robust secondary
index implementation is the likely solution here to ensure the primary use case remains fast.
18. What is phoenix?
A) phoenix is an sql layer on hbase
[adsense]
19. How fast is Phoenix? Why is it so fast?

A) Phoenix is fast. Full table scan of 100M rows usually completes in 20 seconds (narrow table on a medium
sized cluster). This time come down to few milliseconds if query contains filter on key columns. For filters on non-
key columns or non-leading key columns, you can add index on these columns which leads to performance
equivalent to filtering on key column by making copy of table with indexed column(s) part of key.
20) Why is Phoenix fast even when doing full scan?
A) Phoenix chunks up your query using the region boundaries and runs them in parallel on the client using a
configurable number of threads
The aggregation will be done in a coprocessor on the server-side, collapsing the amount of data that gets returned
back to the client rather than returning it all.
Sqoop Interview Questions and answers :
1. How will you get data from RDBMS into HDFS?
2. Can we store mysql table data as sequence file in hdfs via sqoop?
3. Does sqoop support compression techniques to store data in HDFS?
[adsense]
4. Can we load all the tables in a database into hdfs in a single shot?
A) import-all-tables
5. Can we copy a subset of data from a table in RDBMS into HDFS?(based on some criteria)
A) Using –where “country=’us'” condition in import command
6. How many reduce tasks will be run by default for a sqoop import command?How many mappers?
A) 0 , 4
[adsense]
7. If we get java heap space error and we have already given the maximum memory, what is the possible solution?
A) increase mappers by -m 100

8. What is the default port for connecting to MySQL server?
A) 3036
9. How can we resolve a Communications Link Failure when connecting to MySQL?
Verify that we can connect to the database from the node where we are running Sqoop:
$ mysql –host= –database=test –user= –password= Add the network port for the server to your my.cnf file. Set up
a user account to connect via Sqoop. Grant permissions to the user to access the database over the network:
Log into MySQL as root mysql -u root -p
Issue the following command: mysql> grant all privileges on *.* to ‘user’@’%’ identified by ‘testpassword’
mysql> grant all privileges on *.* to ‘user’@” identified by ‘testpassword’
10. Can we provide SQL queries in SQOOP Import command?
[adsense]
Flume Interview Questions and answers:
1. Can we load data directly into Hbase?
A) yes
2. How will you create directories in HDFS based on the timestamp present in input file?
A) hdfs.path=/user/%y-%m-%d/%H%M%S)(format escape sequences)
3. What will happen if no timestamps are present in input file?
it will throw an exeception, to slove this hdfs.useLocalTimeStam=true…
[adsense]
4. Work flow of flume?
5. What are the channel types in Flume?(Memory,JDBC,File channel)Which one is faster – memory?
6. How will you start a flume agent from Command line?

7. What are interceptors in flume?
8. We are getting a NumberFormatException when using format escape sequences for date & time(%Y %M %D etc..)
in HDFS sink. How can we solve this exception?
To use data escape sequences in Flume, there should be timestamp present in header of the source record. If
there is no timestamp in the source file, we can solve this exception by two ways
i) By adding Timestamp interceptor in source as shown below
a1.sources.tail.interceptors = ts
a1.sources.tail.interceptors.ts.type = org.apache.flume.interceptor.TimestampInterceptor$Builder
ii) Or by adding Use local timestamp=true parameter in configuration properties of agent for HDFS sink.
[adsense]
9. What is the bridge mechanism used for Multi-hop agent setup in Flume?
A) Avro RPC
9. Which is the reliable channel to make sure there is no data loss (JDBC, File, Memory)?
A) file channel is reliable
10. What is Fan out flow in Flume?
11. What are the event serializers available in Flume?
A) Text, Avro
12. How do we collect records in JSON format directly through Flume?
A) by usring JSONHandler
13. What is the difference between FileSink and File Roll Sink?
14. Difference between ASynchHbase Sink and HBase sink types ?
15. If We need to test the functionalities of a custom source and channel and we do not need any sink can we setup
this kind of agent?

A) Yes, with sink type as null
16. Can we perform realtime analysis on the data collected by Flume directly ? if yes how?
A) yes by using MorphlineSolrSink we can extract data from Flume events, transform it, and load it in near-real-
time into Apache Solr servers, which in turn serve queries to end users or search applications.
17. If we need to get speed of memory channel and data reliabilty of file channel in a single agent channel, then how
can we achieve this?
A) Use SpillableMemoryChannel for this purpose
18. What are multiplexing selectors in flume?
19. What are replication selectiors in flume?
[adsense]
20. What is the use of HostInterceptor in flume?
21. What is the advantage of UUIDInterceptor in flume?
22. In defining type of sources or sinks in flume is it mandatory to provide the full class name?
A) No, we can also provide the alias names. For example, we use hdfs as sink.type in place of
org.apache.flume.sink.hdfs.HDFSEventSink
Splunk Interview Questions and answers :
1. What is Splunk and what is hunk?
2. How do we connect to HDFS in hunk?
3. Is there any connector for Hive server directly to load Hive tables into Hunk?
[adsense]
4. What is HiveSplitgenerator in Hive provider?

5. Do we need to keep Hive thrift server running and Hive metastore services running to retrieve hive tables into hunk?
yes
6. Can we create dashboards in hunk with visualization charts embedded in it?
[adsense]
7. Deos Hunk support reading of compressed files (.gz, .bz2) files on Hadoop?
8. Does hunk support reading of snappy compressed file on hadoop?
9. Where do we can look for the error messages or exceptions in search query in hunk? (search.log file under
dispatcher folder in Hunk distribution)
10. What is the default port for accessing Hunk web UI? (8000)
[adsense]
Tableau Interview Questions and answers :
1. Can we use Tableau on Linux server ? (no, supports only windows and mac)
2. What is the difference between Hunk and Tableau
3. How do we connect to Hiveserver from Tableau?
[adsense]
4. How can we connect to MySQL from tableau?
5. Can we perform data blending of two different sources in tableau?
6. Do we need to write queries to perform joins or filters in tableau?
[adsense]
7. Does Tableau fire any mapreduce jobs in the backend to pull data from hive?
Oozie & Azkaban Interview Questions and answers:

1. What is the Job scheduler you use in your production cluster?
2. Does Oozie support time based triggering of jobs ? (yes)
3. Does Azkaban support time based triggering of jobs ? (yes)
[adsense]
4. Does Oozie support data based triggering of jobs ? (yes)
5. Does Azkaban support time based triggering of jobs ? (yes)
6. Can we define dependencies between jobs in Akaban flows? (yes)
7. What is the difference between Oozie and Azkaban?
[adsense]
8. How do we create properties files in Azkaban?
9. How do we create properties files in Oozie?
Unix Interview Questions and answers:
1. How do you know what are the processes running in Unix?
$ ps – lists all the unix system processes
$ jps – Lists all the java processes
$ jobs – Lists all the processes that were suspended and running in the
background. Because the jobs command is a foreground process, it cannot show us active foreground processes.
2. How will you stop a process forcibly in Unix?
Use the below command to kill/stop a process forcibly.
$ kill -9 processid;
Here option -9 denotes force killing.
[adsense]

3. Will the below commands result in same output ?
TEST=”hello world” ;
$ echo $TEST;
$ echo TEST;
Ans) No. first command will print “hello world” on console and second one will print “TEST” on console.
4) How can we define constants in Unix shell scripting?
Ans) We can achieve this with the help of readonly variables in Unix shell scripting.
For example, consider the following commands:
$ TEST1=”hello”
$ readonly TEST1
$ echo $TEST1
hello
$ TEST1=”world”
The last command results in an error message:
/bin/sh: TEST1: This variable is read only.
5) Can we unset variables in Unix ?
Yes, we can release the variable names by using unset command.
For example,
$ unset TEST;
will release the variable TEST and it no longer references “hello world” string. But we cannot use the unset
command to unset variables that are marked readonly.For example,
$ unset TEST1;
will result in an error message.
[adsense]
6) What are Environment Variables in Unix?
An environment variable is a variable that is available to any child process of the shell. We will make a variable
environmental by using export command.

Syntax for declaring environment variables:
$ name=value ; export name;
7) What are Shell Variables in Unix?
A shell variable is a special variable that is set by the shell and is required by the shell in order to function
correctly. Some of these variables are environment variables whereas others are local variables.
These are the variables that the shell sets during initialization and uses internally. Example are:
PWD Indicates the current working directory as set by the cd command.
UID Expands to the numeric user ID of the current user, initialized at shell startup.
PATH Indicates search path for commands. It is a colon-separated list of directories in which the shell
looks for commands. A common value is
HOME Indicates the home directory of the current user: the default argument for the cd built-in command.
8) What does $@ represent in Unix? (All arguments of command)
[adsense]
9) What is $? in unix(it is the status of last executed command)
10) What is sed? and why do use it? (It is stream editor, it can be used for replacing set of characters with other set)
JAVA Interview Questions and answers:
1. what is java
2. about JVM,JRE,JDK
3. oops concept with realtime examples
4. String and string pool concept
5. diff between String,StringBuilder,String buffer
6. diff between final and finally
7. diff between equals and hashcode
8. comparission concept in set,hashmap,hashtable
9. accessing methods and variables using superclass reference and subclass object
10. what is abstract class and interface
11. what is is-a ,has-a ,uses-a relation in java
12. diff b/w comparator and comparable interface in java and its methods
13. what are mutable objects and immutable objects and how to create immutable object in java
14. what is default acceess modifiers for a variable in interface=====public static final

15. what are adapters classes in java
16. what is abstractfactory,singleton and facade design pattern in java
17. diff between anonymous,innerclass and nested class
18. how to create object for innerclass and nested class
19. what is exception
20. diff between checked and uncheckedexception
21. concepts of throw,throws,try,catch,finally
22. diff between classcastexception,classnotfound exception,nomethoddeff exception
23. what is collection
24. diff between arraylist and linkedlist, hashmap and linkedhashmap
25. about dictionary,vector,hashtable,properties
26. how to create stack using two arraylist
27. difference between java5,java6,java7,java8
28. what is autoboxing and unboxing(faeture from 1.5)
29. what is wrapper class
30. what is multithreading,
31. stages in multithreading
32. diff between sleep,wait,join methods
33. when we get interruptedexception and illegalmonitorstate exception
34. what is deadlock in java
35. what is synchronization
36. how many ways to craete object in java
37. what is serializable
38. what is transient keyword in ajava
39. diff b/w interpreter and compiler
40. what are the methods in java.lang.object class
41. what is externalizable
42. how many interface are there in collections
43. what is collections class in collections
44. what are applets and its advantages and disadvantages
45. socket communication in java(java.net.*;)
scenario
============
classA temp=new classA();
temp.i=5;
ClassB temp1=temp;

temp1.i=10;
sysout(temp.i and temp1.i);
temp1=null;
sysout(temp.i);
sysout(temp1.i);
==========================
46. how to find number of days between two date objects date1 and date2
47. Read all methods in Java.lang.math class
48. e. Math.random(),math.ceil,math.round,math.abs
49. what is pojo and poji
50. how to get a connection from database
51. diff between resultset and rowset
52. what is updatable resultset
53. what is metadata
54. how to get metadata of a table in java
55. how many ways to create string
56. differentaite below statements
=====
String s1=”hai”
String s2=new String(“hai”);
================
57. what is instance of keyword in java and how its check
58. what is min,normal,highest priority of a thread
59. which thread has least and highest priority in java
60. what are markerinterfaces and examples
61. concept about acessspecifiers public,private,protected,default and its other names
62. what accessmodifiers can we place for a variable inside a method(check it only final and static)
63. what is default access specifier in java
64. what are the accessspecifiers can be used for a class in java
65. why java does not support multiple inheritance and how java can achieve this?
66. what is static binding and dynamic binding?
67. how many ways to create threads
68. when we go for creating thread using extends and by implementing Runnable interface

69. what is garbageCollector concept in java how we can invoke programmatically
70. what is finalize method and when it is invoked
71. concept of system.out.println() method;
72. concept of list,set,map interfaces and its sub classes
73. difference between for each and iterator
74. which one will be executed below if no exception occurs
try{
return val;
}catch(Exception e){
}finally{
return val;
}
================== did below program exexcutes
class A{
public void f1(){
}
}
class B extends A{
protected void f1(){
}
}
class A{
protected void f1(){
}

}
class B extends A{
public void f1(){
}
}
class A{
public void f1() throws NullPointerException{
}
}
class B extends A{
public void f1() throws Exception{
}
}
75. what is volatile variable in java?
76. what is race condition in java?
scenario===
set s=new SortedSet();
s.add(“1”);
s.add(3);
s.add(“2”);
then which order it prints==ans===ClassCast ExceptionError
scenario====

Object arr[]={new Integer(“5”),new String(“1”),new Double(“2”)}
then which order its sorts using Arrays.sort(arr);====Error
scenario======
class A{
public void s(short n){
sop(short);
}
public void s(long n){
sop(long);
}
public void s(int n){
sop(int);}
psv main(String []args){
short a=1;
long b=10;
s(a);
s(b);
}
}

Author
Viewing 1 post (of 1 total)
Posts
Reply To: 250 Hadoop Interview Questions and answers for Experienced Hadoop developers
Your information:
Name (required):
Mail (will not be published) (required):
===
77. What is Connection? is it calss or interface, if it is interface where is the implementation calss
78. write your own logic of connection pooling
79. check with array declaration for types int,float,boolean,double.
80. learn narrowing and widening conversions.
81. difference between int[] a,b and int a[],b
82. concept of superclass object casting
83. instanceof example using inheritence concept;
84. switch statement allows only byte,char,int,string literals
85. difference between fail-safe iterator and fail-fast iterator;
86. brief copyonwritearraylist,concurrenthashmap
87. what is tight coupling and loose coupling in java
88. whats is interthread communication and example(producer and consumer example)
89. what is blockingqueue and linked blockingqueue
90. Why Collection doesn’t extend Cloneable and Serializable interfaces ?
91. What do you know about the big-O notation and can you give some examples with respect to different data structures
92. What is the tradeoff between using an unordered array versus an ordered array ?
93. What is the difference between Serial and Throughput Garbage collector ?
94. what is connection pooling in java?
95. Explain Serialization and Deserialization.
96. Why wait, notify and notifyAll is defined in Object Class and not on Thread class in Java
97. Why wait notify and notifyAll called from synchronized block or method in Java
98. what is varargs

View Full Site
Proudly powered by WordPress
Submit
0 Tweet
Website:
Share this:
b i link b-quote del img ul ol li code close tags crayon
7ShareShare

250hadoopinterviewquestions

More Related Content

What's hot (20)

Similar to 250hadoopinterviewquestions (20)

Recently uploaded (20)

250hadoopinterviewquestions