IBM System x3850 X5 / x3950 X5 Product Guide

Ultrascalability combined with extreme availability
features and industry-leading performance
®

Product Guide
April 2011

IBM System x3850 X5 / x3950 X5
Architecture Overview Outstanding performance, superior mainframe-like reliability, and
fault-tolerant memory characteristics
® ®
IBM has been designing and implementing servers under the X-Architecture name since
2001. eX5 technology represents the fifth generation of enterprise servers based on the same
CONTENTS design principle IBM began with in 1997: to offer systems that are expandable, offer “big iron”
reliability, availability, and serviceability (RAS) features, with extremely competitive
® ®
Architecture Overview 1 price/performance on an Intel Xeon processor-based system.
Key Highlights 2 The eX5 technology is primarily designed around three major workloads: database servers,
server consolidation using virtualization services, and Enterprise Resource Planning
Key Features 3 (application and database) servers.
Key Options 14 If you’re using industry-standard Xeon processor-based servers for running business critical
applications, the systems that run these applications need the type of technology designed
x3850/x3950 X5 Images 15 into IBM’s eX5 technology systems. eX5 technology represents a $100M+ investment in
designing a flagship offering that can harness the power of 4-socket-and-up 64-bit x86 (x64)
x3850/x3950 X5 Specs 17
Xeon processors. The eX5 family includes two 4U 4-socket rack-optimized chassis (x3850
The Bottom Line 21 X5 and x3950 X5), which are offered in different scaled configurations up to 8 sockets, with
the architectural capability to scale further. In addition, for those workloads that require the
Server Comparison 22 maximum available memory, the x3850 X5 and x3950 X5 support a 1U MAX5 memory
expansion unit, which adds an additional 32 DIMM slots per chassis (up to 96 DIMMs / 3TB
For More Information 23
total). Alternatively, if you also need more processor sockets, you can add a second x3850
Legal Information 23 X5 or x3950 X5 to form one 8U 8-socket server with double the memory (up to 4TB),
HDDs/SSDs, adapter slots, and all the other system resources. For the ultimate in scalability,
you can add two MAX5 memory expansion units to a 2-node/8-socket server, for up to 6TB of
memory, ideal for large virtualization, ERP, and database needs.
IBM FlexNode partitioning allows you to logically divide an 8-socket server into two 4-
socket servers remotely and automatedly, and then revert back to a single 8-socket server,
all without requiring a physical visit to the server. Maybe you’d like to start out with a 4-socket
server and possibly add sockets later, if your needs change. Or perhaps you need more than
a 4-socket server now, but don’t want to get locked into a monolithic 8-socket or larger
server—again, in case your requirements change. With IBM, you can stop at 4 sockets, or
expand memory or CPU sockets further if needed. And if you require a variety of 4- and 8-
socket servers in your data center, you can qualify a single server for all these workloads.
This can save much time and effort and speed up deployment. You can also save money on
software licensing by virtualizing a 4- or 8-processor server into many VMs, rather than using
multiple 2-processor servers. Huge amounts of memory also enable more and larger VMs,
and larger databases.
™
IBM X-Architecture pioneered XpandOnDemand (“pay as you grow”) scalability, which
allows chassis to be simply cabled together to form larger scale-up systems. This capability
allows IBM to sell a large SMP (symmetric multiprocessing) system at entry price points. With
XpandOnDemand, you can start small and later expand as your needs change, without
requiring you to buy more than you need up-front or throw away parts later as you expand.
IBM’s eX5 technology-based systems are the ideal solution for scale-up database-serving
® ® ® ®
applications on Microsoft Windows with Microsoft SQL Server or IBM DB2 , as well as
®
Linux with Oracle or DB2. Database hosting demands ultimate server reliability features, and
once installed, they tend to grow and grow, requiring ever greater levels of availability. eX5
servers provide exactly that degree to availability.
Another strong application area for the eX5-based systems is enterprise server consolidation
activities workloads, including SAP and Oracle. eX5 systems can offer considerable savings
®
over UNIX deployments, using our certified solution stacks on either Windows or Linux..
Larger servers need more processor, memory and I/O resources, which make maximum use
of any applicable virtual machine software licensing fees and deliver superior system
utilization levels. The name of the game in consolidation activities is to deploy the fewest new
servers possible and help IT staff manage more images with the same or fewer overall
people.
These eX5 servers are designed to protect your data with high performance, high reliability,

1
Please see the Legal Information section for important notices and information.

® ®
and high availability. They support the latest ten-, eight-, six-, and four-core Intel Xeon E7
family and 7500 series processors, up to 1066MHz memory access, and up to 30MB of L3
cache to help provide you with the computing power you need to match your business needs
and growth. The new Xeon E7-8800 and E7-4800 series processors offer up to 40% greater
performance than the previous-generation Intel 7500 series processors.
™
In addition, the x3850 X5 and x3950 X5 use industry-standard DDR3 memory with Chipkill
ECC (Error Checking and Correcting) protection—for high performance and reliability. For
™
even higher levels of availability, the eX5 servers also offer Memory ProteXion , memory
scrubbing, memory rank sparing, and selectable memory mirroring.
A dual-port integrated high-speed Gigabit Ethernet controller with TOE (TCP Offload
Engine) acceleration is standard. In addition, a dual-port 10bE virtual fabric adapter is
standard in most models. The 10GbE solution provides the benefits and flexibility of I/O
convergence in a single end-to-end solution. The x3850 offers seven high-performance PCIe
adapter slots (six available, if the 10GbE NIC is installed).
The x3850 X5 and x3950 X5 offer industry-leading scalability, including 4-processor support
(upgradeable to 8 processors / 80 cores in two chassis/nodes), up to 2TB of memory per
chassis (upgradeable to 2TB in two nodes, or 3TB with MAX5), and a choice of up to eight
2.5-inch internal Serial-Attach SCSI (SAS) or Serial ATA II (SATA II) hot-swap hard disk
drives with an internal storage capacity of 4TB per chassis (up to 16 drives and 6TB overall,
in a two-chassis configuration), or sixteen 1.8-inch solid-state drives (SSDs) with a
capacity of 3.2TB per chassis (6.4TB in two nodes).
All models include a ServeRAID-BR10i V2 controller, which supports hardware RAID-0/1/1E.
This controller is installed in a dedicated RAID slot, and can be upgraded with optional IBM
ServeRAID SAS/SATA/SSD RAID controllers, which add up to 512MB of battery-backed
cache, RAID-10/5/50 support, and optionally RAID-6/60 and full disk encryption, via SED
(Self-Encrypting Disk). The 4U size of the chassis helps you maximize your rack investments.
Up to 10 of these chassis can be installed in a single 42U rack, for a total of up to 40
processors (400 cores), 70 PCIe slots, and 80 HDDs or 160 SSDs, offering an ideal balance
of performance, storage and I/O slots per rack.
Standard in both the x3850 X5 and the x3950 X5 is the Integrated Management Module
(IMM) that enables the user to manage and control the server easily—both locally and
remotely. The IMM offers a high level of manageability that is designed to keep costs down
and the system up—even when network usage increases. The drop-down light path
diagnostics panel enables quick servicing of the system if a problem develops. These
advanced features help maximize network availability by increasing uptime, as do IBM
OnForever™ features, such as hot-swap/redundant HDDs, power and fans; Active
™ ™
Memory ; temperature-controlled fans with Calibrated Vectored Cooling ; IPMI 2.0
support, including highly secure remote power control and Serial over LAN; as well as
text- and graphics-console redirect over LAN.
Another improvement with the new generation of X-Architecture is the replacement of legacy
BIOS with a new generation Unified Extensible Firmware Interface (UEFI). UEFI provides
a more intuitive user interface and understandable event logs and better management.
With the inclusion of unique IBM service and support features such as IBM Systems
™
Director, IBM Systems Director Active Energy Manager™, and IBM ServerGuide , the
x3850/x3950 X5 is designed for maximum uptime.
If you need a balance of high-performance four-socket processing, scalability up to eight
sockets, enormous memory expansion, and large I/O capacity in a rack-dense environment,
these are the ideal systems.

Key Highlights eX5 Design Features
eX5 design offers numerous features per chassis to boost performance and reduce product
and operating costs:
• Supports up to four Intel Xeon processors with 12MB to 30MB of L3 cache (processor
dependant), and Intel Virtualization Technology (VT) , Hyper-Threading (HT) technology,
and Turbo Boost technology.
• Supports 10-core, 8-core, or 6-core Xeon E7 family processors or 8-core, 6-core or 4-
core Xeon 7500 series processors, scalable to 8 processors in a two-chassis
configuration.
• Supports up to 2TB of DDR3 memory in a single 4U chassis/node. A two-node (8U)
configuration supports up to 4TB and doubles all other system resources as well
(HDD/SDD capacity, 10Gb/1Gb Ethernet ports, adapter slots, etc.).
• The 7143 machine type supports low-voltage 1.35V DIMMs.
• Support for a MAX5 memory expansion unit, increasing memory capacity by 50% for
memory-intensive workloads. One chassis with one MAX5 supports up to 3TB of

2


memory in 5U; two chassis with two MAX5 units support up to 6TB in 10U.
• Alternatively, with 96 DIMM slots the server and MAX5 can be populated with
inexpensive 2GB DIMMs (for 192GB), while gaining the performance boost from using
12 memory controllers (8 in the server and four more in the MAX5 unit).
• IBM FlexNode partitioning allows a physical two-node configuration to be remotely
reconfigured by software into logical single-node servers, as needs change or for daily
peak and off-peak workloads. For example, FlexNode partitioning provides the flexibility
of running the server as one 8-socket server at night for heavy-duty batch processing,
and as two 4-socket servers during the day for separate interactive workloads—all
remotely and automatedly, without need for an onsite visit.
• 2-Port 10Gb Ethernet adapter and 2-port Gigabit Ethernet controller standard in most
models, optional in the others. (Two 2-port 10Gb adapters and two 2-port Gb Ethernet
controllers standard in two-node configurations.)
• Fast PC3-10600 DDR3 ECC memory with Chipkill error correction, double Chipkill,
™
Memory ProteXion (redundant bit steering), memory scrubbing, memory rank
sparing, and selectable memory mirroring and partial mirroring protection provides
speed and high availability.
• Seven high-speed PCIe Gen 2 adapter slots (six available with 10GbE NIC installed)
offer investment protection by supporting high-performance adapters, such as 10Gb
™
Ethernet, Fibre Channel, Converged Network Adapter (CNA), and InfiniBand adapters.
• Up to 4.8TB of internal high-speed hot-swap SAS storage, or 4TB of low-cost hot-swap
SATA storage, using eight 2.5-inch HDDs per chassis (9.6TB or 8TB, respectively, in a
2-node configuration); up to 3.2TB of hot-swap solid-state storage per chassis, using
16 SSDs (6.4TB per two nodes).
• Integrated Management Module (IMM) standard in each chassis.
• Optional ServeRAID controllers that support RAID-0/1/10/5/50/6/60 and high-
performance SSD drives.

Key Features Multicore Xeon Processors
The x3850 X5 and x3950 X5 ship with two high-performance Intel Xeon processors—either
the 6-, 8-,or 10-core E7 family or the 4-, 6-, or 8-core 7500 series—and support up to four per
chassis (node), allowing you to upgrade as business needs require. The eX5 servers also go
a step further by allowing you to add a second node to increase the number of sockets from
four to eight.
The system offers a choice of processor clock rates, cache sizes and power draw:
Xeon E7 Series Processors
• 130W 10-core Xeon processor models E7-8870 or E7-8850 running at 2.4 or 2.0GHz
(respectively), with low power draw per core (13W), 6.4 GTps (gigatransfers per second)
QPI speed, 1066MHz memory access, dual integrated memory controllers, 30MB of
shared L3 cache, and Intel VT, HT, and Turbo Boost technology
• 105W 10-core Xeon processor model E7-8867L running at 2.13GHz, with extremely low
power draw per core (10.5W), 6.4 GTps (gigatransfers per second) QPI speed, 1066MHz
memory access, dual integrated memory controllers, 30MB of shared L3 cache, and Intel
VT, HT, and Turbo Boost technology
• 130W 10-core Xeon processor model E7-8860 running at 2.26GHz, with low power draw
per core (13W), 6.4 GTps (gigatransfers per second) QPI speed, 1066MHz memory
access, dual integrated memory controllers, 24MB of shared L3 cache, and Intel VT, HT,
and Turbo Boost technology
• 130W 8-core Xeon processor model E7-8837 running at 2.67GHz, with reduced power
draw per core (16.25W), 6.4 GTps (gigatransfers per second) QPI speed, 1066MHz
VT, HT, and Turbo Boost technology
• 105W 8-core Xeon processor model E7-8830 running at 2.13GHz, with low power draw
per core (13.13W), 6.4 GTps (gigatransfers per second) QPI speed, 1066MHz memory
• 130W 10-core Xeon processor model E7-4870* running at 2.4GHz, with low power draw
per core (13W), 6.4 GTps (gigatransfers per second) QPI speed, 1066MHz memory
• 130W 10-core Xeon processor models E7-4860* or E7-4850* running at 2.26 or 2.0GHz,
with low power draw per core (13W), 6.4 GTps (gigatransfers per second) QPI speed,

3


1066MHz memory access, dual integrated memory controllers, 24MB of shared L3 cache,
and Intel VT, HT, and Turbo Boost technology
• 105W 8-core Xeon processor models E7-4830* running at 2.13GHz, with low power draw
• 105W 8-core Xeon processor models E7-4820* running at 2.0GHz, with low power draw
• 105W 6-core Xeon processor models E7-4807* running at 1.86GHz, with moderate power
draw per core (17.5W), 6.4 GTps (gigatransfers per second) QPI speed, 1066MHz
VT, and HT technology (no Turbo Boost)
* This processor is limited to single-chassis configurations (4 sockets per chassis supported).
Xeon 7500 Series Processors
• 130W 8-core Xeon processor model X7560 running at 2.26GHz, with 64-bit extensions,
low power draw per core (16.25W), 6.4 GTps (gigatransfers per second) QPI speed,
1066MHz memory access, dual integrated memory controllers, 24MB of shared L3 cache,
and Intel VT, HT, and Turbo Boost technology
• 130W 8-core Xeon processor model X7550 running at 2.0GHz, with 64-bit extensions, low
power draw per core (16.25W), 6.4 GTps QPI speed, 1066MHz memory access, dual
integrated memory controllers, and 18MB of shared L3 cache, and Intel VT, HT, and
Turbo Boost technology
• 95W 8-core Xeon processor model L7555 running at 1.86GHz, with 64-bit extensions,
extremely low power draw per core (11.88W), 5.86 GTps QPI speed, 977MHz memory
• 95W 6-core Xeon processor model L7545 running at 1.86GHz, with 64-bit extensions, low
integrated memory controllers, 18MB of shared L3 cache, and Intel VT, HT, and Turbo
Boost technology
• 130W 6-core Xeon processor model L7542 running at 2.66GHz, with 64-bit extensions,
reduced power draw per core (21.67W), 5.86 GTps QPI speed, 977MHz memory access,
dual integrated memory controllers, 18MB of shared L3 cache, and Intel VT and Turbo
Boost technology (no HT)
• 105W 6-core Xeon processor model E7540 running at 2.0GHz, with 64-bit extensions, low
• 105W 6-core Xeon processor model E7530* running at 1.86GHz, with 64-bit extensions,
low power draw per core (17.5W), 5.86 GTps QPI speed, 977MHz memory access, dual
• 95W 4-core Xeon processor model E7520* running at 1.86GHz, with 64-bit extensions,
low power draw per core (23.75W), 4.8 GTps QPI speed, 800MHz memory access, dual
integrated memory controllers, and 18MB of shared L3 cache and Intel VT and HT
technology (no Turbo Boost)
With the Xeon E7 and 7500 series processors, Intel has diverged from its traditional
Symmetric Multiprocessing (SMP) architecture to a Non-Uniform Memory Access (NUMA)
architecture. The Xeon 7500 processors are connected through three serial coherency links
called QuickPath Interconnect (QPI). QPI is capable of 6.4GTps (gigatransfers per second).
Put another way, the E7 and 7500 series processors offer 3X the bandwidth of the previous
7400 series processors.
Turbo Boost Technology dynamically turns off unused processor cores and increases the
clock speed of the cores in use, by up to three model frequencies. For example, with 7-10
cores active, a 2.4GHz E7-8870 10-core processor can run the cores at up to 2.53GHz. With
5-6 cores active, it can run those cores at 2.67GHz; with only 1-4 cores active, it can run
those cores at 2.8GHz Similarly, with six cores active, a 2.26GHz X7560 8-core processor
can run the cores at 2.53GHz. With only 3-4 cores active, it can run those cores at 2.67GHz.
When the cores are needed again, they are dynamically turned back on and the processor
frequency is adjusted accordingly.
Each processor includes two integrated memory controllers, to reduce memory bottlenecks
and improve performance. Memory access is at up to 1066MHz frequency, depending on the

4


processor model and memory used.
In processors implementing Hyper-Threading technology, each core has two threads
capable of running an independent process. Thus, an 8-core processor can run 16 threads
concurrently.
Intel’s Virtualization Technology (VT) integrates hardware-level virtualization hooks that
allow operating system vendors to better utilize the hardware for virtualization workloads.
Intelligent Power Capability powers individual processor elements on and off as needed, to
reduce power draw.

DDR3 Registered Memory with Active Memory Protection
eX5 servers use registered double data rate III (DDR3) DIMMs and provide Active Memory
features, including advanced Chipkill memory protection, for up to 16X better error
correction than standard ECC memory, IBM Memory ProteXion, and optional memory
mirroring. In addition to offering triple the memory bandwidth of DDR2 or fully-buffered
memory, DDR3 memory also uses less energy. 1.8V DDR2 memory already offered up to
37% lower energy use than fully buffered memory. Now, a generation later, 1.5V DDR3
memory is even more efficient, using 10-15% less energy than DDR2 memory. In addition
machine type 7143 supports low-voltage 1.35V DIMMs, which consume up to 19% less
energy than 1.5V DIMMs. (1.5V and 1.35V DIMMs can be mixed within a given memory
controller, however all DIMMs in that controller will run at 1.5V.)
The 7143 machine type of x3850 X5 and x3950 X5 servers support up to 2TB of memory per
node (chassis) in 64 DIMM sockets using 32GB DIMMs. (The 7145 machine type supports up
to 1TB per node with 16TB DIMMs.) They use PC3-10600 double data rate 3 (DDR3)
memory (operating at 1066MHz) for fast access, as well as PC3-8500 DDR3 and LV versions
of both types. Adding a second x3850/x3950 X5 (7143) server to the first doubles the
memory capacity to 4GB in 128 DIMM slots in 8U of rack space. (Two 7145 nodes support up
to 2TB.)
The standard configuration includes 2 memory cards, which support up to 8 DIMMs apiece.
The system is upgradeable to 8 memory cards per chassis. (With configurations of 8-to-16
DIMMs, using two memory cards saves cost, but using eight cards increases performance.) If
2TB is not enough, but you don’t need additional processors, you can attach a 1U MAX5
memory expansion unit, which adds another 32 DIMM slots (up to 1TB), for a total of 3TB in
only 5U.
Redesign in the architecture of the 7500 series and E7 family processors brings radical
changes in the way memory works in these servers. For example, they integrate two
memory controllers inside each processor, resulting in eight memory controllers in a four-
socket system. Each processor has four memory channels, each with a memory buffer.
(MAX5 adds another 4 memory controllers.)

MB MB MB MB MB MB MB MB
1 1 1 1 1 1 1 1
Intel Intel

Xeon Xeon
E7 E7 Intel
Intel
PCIe
PCIe Boxbor
Boxbor Intel Intel o
o
Xeon Xeon
E7 E7

1 1 1 1 1 1

MAX5

1 1 1 1

This advanced memory architecture provides up to 333% more aggregate memory bandwidth
(up to 120GBps when using eight memory cards vs. a maximum of 32GBps bandwidth) than
the previous generation, for exceptional memory performance, and quadruple the system
memory capacity of the predecessor x3850 M2 server. By performing reads and writes
simultaneously, it eliminates memory read-to-write blocking latency. In addition, it also offers
innovative data reliability and security features to help improve data integrity, including

5


enhanced CRC protection, data retry on error detect and buffer registers for improved fault
isolation.
An important guideline is to populate equivalent ranks per channel. For instance, mixing one
single-rank DIMM and one dual-rank DIMM in a channel should be avoided.
Notes: DIMMs must be installed in matching pairs. Also, each CPU requires at least 2
DIMMs. It is important to ensure that all memory channels in each processor are populated.
The relative memory bandwidth decreases as the number of channels populated decreases.
This is because the bandwidth of all the memory channels is utilized to support the capability
of the processor.
So, as the channels are decreased, the burden to support the requisite bandwidth is
increased on the remaining channels, causing them to become a bottleneck.
For peak performance:
• Populate both processors with equal amounts of memory to enable a balanced NUMA
system.
• Populate both memory controllers within a processor with equal memory capacity.
• Populate an even number of ranks per channel.
• Use dual-rank DIMMs whenever appropriate.
Power guidelines:
• Fewer larger DIMMs (for example 8 x 4GB DIMMs vs. 16 x 2GB DIMMs will generally
have lower power requirements
• x8 DIMMs (x8 data width of rank) will generally draw less power than equivalently sized x4
DIMMs
Reliability guidelines:
• Using fewer, larger DIMMs (for example 8 x 4 GB DIMMs vs. 16 x 2GB DIMMs is generally
more reliable
• Memory controllers support IBM Chipkill memory protection technology with x4 DIMMs (x4
data width of rank) and x8 DIMMs
For increased availability beyond Chipkill error correction, the eX5 servers offer additional
levels of IBM Active Memory protection:
Memory ProteXion technology provides multichip error protection and works in conjunction
with Chipkill technology—which provides multibit protection per chip—and standard ECC
protection, to provide multi-level memory correction.
Memory scrubbing is an automatic daily test of all system memory. It detects and reports
memory errors that might be developing before they cause a server outage. Memory
scrubbing and Memory ProteXion work together. When a bit error is detected, memory
scrubbing determines whether the error is recoverable. If so, the Memory ProteXion feature
will write the data to new location; if it is not recoverable, scrubbing sends an alert to light
path diagnostics, which then notifies IBM Systems Director.
Memory mirroring works much like disk mirroring. The total memory is divided into two
channels. Data is written concurrently to both channels. If a DIMM fails in one of the DIMMs
in the primary channel, it is instantly disabled and the mirrored (backup) memory in the other
channel becomes active (primary) until the failing DIMM is replaced. With mirroring enabled,
one-half of total memory is available for use. (Note: Due to the double writes to memory,
performance is affected.) Mirroring is handled at the hardware level; no operating system
support is required.
Memory rank sparing works somewhat like mirroring, except instead of having an entire
memory channel reserved, two memory ranks per memory card are configured as spares. In
the event of a memory failure on the same card, one of the spare ranks is automatically used
in place of the failing one. (Rank sparing and mirroring are mutually exclusive.)
1
Memory is available in 2GB, 4GB, 8GB, 16GB and 32GB DIMMs .

High-Performance Scalability
Scalability can be achieved in two different ways. You can choose to scale “natively” by
simply cabling two chassis together via the Quick Path Interconnect (QPI) ports, for 8 sockets
and 128 DIMMs. Or, you can scale via MAX5, adding memory capacity for increased
performance. This configuration cables a 4-socket chassis to a MAX5. You can also go
2
further, with two chassis and two MAX5 units, all interconnected . The two MAX5 units are
cabled together using our exclusive EXA Scalability Kit. The result is an 8-socket, 192 DIMM

1
32GB DIMMs supported in machine type 7143 only

6


system.
Up to four QPI cables connect the MAX5 to the host x3850/x3950 X5 at speeds up to
6.4Gbps (processor-specific), providing exceptional interchassis throughput (100GBps
aggregate). With two chassis and two MAX5 units, up to three EXA cables connect to the
secondary node at speeds up to 10Gbps (processor-specific), supported by L4 cache, to
provide exceptional internode throughput (48GBps aggregate).
Because of this design, an x3850/x3950 X5 server has the incredible flexibility of starting out
as a 4-socket server with up to 1TB of memory, seven PCIe adapter slots, and eight HDD
bays or 16 SSD bays, and then doubling the processors, cache, slots, and HDD bays, and
tripling the memory, while maintaining first-in-class performance.
The MAX5 scalability and memory expansion feature is a unique IBM enhancement, not
offered by other x86 server architectures.

XceL4v Dynamic Server Cache
A key performance feature of MAX5 expansion is the XceL4v L4 cache. When using a two-
node (10U) x3850/x3950 X5 with two MAX5 units, 512MB of virtual cache (256MB per node
taken from main memory) is allocated to improve inter-node memory latency by caching
memory accesses to the remote (second) node.
XceL4V virtual L4 cache is another IBM-unique enhancement.

Flexible Internal Storage Capacity
The eX5 servers offer a choice of internal storage, supporting up to eight (2.5-inch) hot-
swap Serial-Attach SCSI (SAS) or Serial ATA (SATA) hard disk drives, or up to sixteen 1.8-
inch solid-state drives (SSDs) per chassis (using the IBM eXFlash option). In addition, two
IBM High IOPS SSD adapters can be used per node/chassis.
2.5-inch SAS
• 7,200 RPMs — 160, 500GB (4.0TB maximum per chassis; 8TB in a 2-chassis
configuration)
• 10,000 RPMs — 73.4, 146.8, 300, or 600GB (4.8TB per chassis; 9.6TB per 2-chassis)
• 15,000 RPMs — 73.4 or 146.8GB (1.174TB per chassis; 2.35TB per 2 chassis)
2.5-inch SATA
• 7,200 RPMs — 160 or 500GB (4.0TB)
1.8-inch SSD
• 50, 200GB (3.2TB per chassis; 6.4TB per 2-chassis)
o High I/O Performance
– Offers up to 8X more IOPS than HDDs (67/33% read/write OLTP transaction base
mix);
– Optimized for heavy mix of read and write operations, such as transaction
processing, media streaming, surveillance, file copy, logging, backup / recovery, and
business Intelligence
o Lower-Cost IOPS Performance
– Yields better $/IOPS: lower capacity (GB) required to achieve higher IOPS
– Consumes less energy and produces less heat than a conventional disk drive
o Superior Uptime
3
– 3X the reliability of mechanical disk drives
– No moving parts to fail
– Enterprise wear-leveling to extend life even further
o Full OS Support
®
– Supports all ServerProven OSes
For read-intensive transactional workloads requiring extreme IOPS performance, such as
database, video-on-demand, and caching, IBM offers High IOPS SSD PCIe Adapters,
4
equivalent to the IOPS output of approximately 500 3.5-inch 600GB 15K SAS HDDs, with
99% lower latency (30 µs), and 7.7x the bandwidth of a HDD. On a performance-per-watt
5
basis, these adapters outperform HDDs by up to 445x .
High IOPS SSD PCIe Adapters
• IBM 160GB High IOPS SS Class SSD PCIe Adapter (x4 Gen 1—100K IOPS, 750MBps)

2
Machine type 7143 only.

7


• IBM 320GB High IOPS SS Class SSD PCIe Adapter (x4 Gen 1—100K IOPS, 750MBps)
• IBM 320GB High IOPS MS Class SSD PCIe Adapter (x4 Gen 1—100K IOPS, 750MBps)
• IBM 320GB High IOPS SD Class SSD PCIe Adapter (x8 Gen 2—200K IOPS, 1.5GBps)
• IBM 640GB High IOPS MLC Duo Adapter (x8 Gen 2—200K IOPS, 1.5GBps)
Because these adapters go in PCIe slots, rather than drive bays, they can be used in addition
to standard HDDs and SSDs. This makes them ideal for virtualized servers running multiple
tasks, requiring both write- and read-intensive storage media. As flash media they also offer a
predictable lifetime, compared to the sporadic failure rate of HDDs, using N+1 chip-level
redundancy and 11-bit ECC protection.
If you need more storage space, terabyte capacities are possible with external direct-attach
NAS and SAN solutions.

Storage Controllers
All models include an integrated ServeRAID-BR10i V2 SAS/SATA Controller in a dedicated
x8 PCIe slot. Supported controllers include:
6
• The 3Gbps (x8 PCIe) ServeRAID-BR10i V2 controller — hardware RAID-0/1/1E
support (no cache) for up to 8 HDDs or SSDs.
• The 6Gbps (x8 PCIe) ServeRAID-M1015 SAS/SATA controller — RAID-0/1/10 (no
cache) for up to 32 drives (limited to available bays). The IBM ServeRAID M1000
Series Advance Feature Key adds RAID-5 and Self-Encrypting Disk (SED) support.
• The 6Gbps (x8 PCIe) ServeRAID-M5014 SAS/SATA controller — enhanced
performance with 256MB of cache memory, and supports optional battery backup and
RAID-0/1/10/5/50/6/60 for up to 32 drives (limited to available bays).
performance with 512MB of cache memory and battery backup, and supports RAID-
0/1/10/5/50/6/60 for up to 32 drives (limited to available bays).
performance with 512MB of cache memory and battery backup. It supports RAID-
®
0/1/10/5/50/6/60 for up to 8 internal drives, plus multiple external IBM System Storage
expansion units (with up to 240 HDDs).
• The 6Gbps (x8 PCIe) ServeRAID-B5015 SSD controller — enhanced SSD
performance with SSD-optimized microcode, offering the highest IOPS performance for
SSDs in a RAID controller. It supports RAID-0/1/5/6 for up to 8 drives.
• The IBM 6Gbps SSD HBA offers the highest IOPS performance for SSDs in a non-
RAID controller.
The IBM ServeRAID M5000 Series Advance Feature Key adds RAID-6/60 with SED
support to the M5014, M5015 or M5025. The IBM ServeRAID M5000 Series Battery Key
adds battery backup support to the M5014. The ServeRAID M5000 Series Performance
Accelerator Key adds SSD support to the M5015.
Additional external SAS/SATA disk storage, as well as tape backup, is available via one of
several supported iSCSI or FC SAN controllers.

Versatile Drive Bays
The x3850 X5 and x3950 X5 servers include either 1 or 2 drive backplanes (model-
specific).The single-backplane models are upgradeable to 2 backplanes. Each backplane
supports either 4 2.5-inch hot-swap HDDs or, within the same space, 8 1.8-inch hot-swap
SSDs. Thus, you can achieve up to 8 HDDs, or 16 SSDs using up to two IBM eXFlash
storage options. Each individual SSD is capable of sustaining approximately 4,300 IOPS,
which is more than 10X what an enterprise 15,000 RPM 2.5-inch 146.8GB SAS HDD can
achieve (420 IOPS). Thus, each eXFlash module (containing 8 SSDs) is capable of
producing up to 34,400 IOPS, vs. only 3,360 IOPS for 8 SAS HDDs. This means one
x3850/x3950 X5, with two eXFlash options (16 drives), is capable of generating 68,800 IOPs,
vs. only about 6,700 IOPS for storage servers using an equal number of HDDs. In a 2-
chassis configuration, up to 16 HDDs or 32 SSDs are supported (for up to 137,600 IOPS).
Combining 32 SSDs with 4 IBM 640GB High IOPS MLC Duo Adapters produces an

3
Approximately 3,000,000 hours MTBF for SSDs vs. approximately 1,000,000 hours for enterprise 3.5-inch 15K SAS HDDs.
4
According to internal IBM testing, the typical maximum IOPS of a 600GB 15K 3.5-inch hot-swap SAS HDD is ~400 (4K random
reads), while the typical IOPS of a 640GB High IOPS SSD PCIe adapter is ~200,000, or ~500x. The typical bandwidth of the
same HDD = ~195MBps (64K sequential reads), while the typical bandwidth of a 640GB High IOPS MLC adapter is ~1.5GBps, or
~7.7x.
5
97,014 IOPS / 9W = 10,779 IOPS per watt (160GB/320GB adapters). 196,000 IOPS / 12W = 16,333 IOPS per watt (640GB
adapters). 400 IOPS / 16.5W = 24.2 IOPS per watt (600GB 15K 3.5-inch hot-swap SAS HDD).

8


astonishing 937,600 IOPS for a single two-node server.
Each customer-installable eXFlash option includes a drive cage, SSD backplane, and two x4
SAS/SATA cables, which can be installed in seconds as a single unit. One or two ServeRAID
controllers are required per eXFlash option. For RAID support, use one ServeRAID-M1015,
M5014, M5015, or one M5025 controller or Fibre Channel adapter per multiple external IBM
System Storage expansion units. For enhanced IOPS throughput, use one ServeRAID
B5015 non-RAID controller, which is optimized for SSD IOPS performance. (Note: Because
7
SSDs offer triple the reliability of SAS HDDs, RAID support is less necessary.) Each adapter
requires a PCIe slot. For maximum IOPS performance, use two ServeRAID-B5015
controllers per eXFlash option.
Supported single-chassis configurations include:
• 4 2.5-inch HDDs + 8 1.8-inch SSDs (with 1 eXFlash option)
• 8 2.5-inch HDDs
• 16 1.8-inch SSDs (with 2 eXFlash options)
• Plus 2 High IOPS adapters in 2 adapter slots
Supported two-chassis configurations include:
• 8 2.5-inch HDDs + 16 1.8-inch SSDs (with 2 eXFlash options)
• 16 2.5-inch HDDs
• 32 1.8-inch SSDs (with 4 eXFlash options)
• Plus 4 High IOPS adapters in 4 adapter slots (2 per chassis)
An optional (ultraslim, 0.5”) optical drive with a SATA interface is supported in all x3850 X5
and x3950 X5 servers. An external USB floppy drive or optical drive may be used, if needed.
For still more storage, NAS, iSCSI SAN, or FC SAN external expansion options can be
added, using an optional controller.

High-Performance Adapter Slots
There are seven PCIe (PCI Express) Gen 2 adapter slots standard (per chassis). PCI
Express Gen 2 is the latest high-performance, low-latency, next-generation serial I/O bus.
Slot 7 contains a 10Gb Ethernet Adapter in all models except for the 7145-ARx. Slots 1
through 4 are full-length/full-height. Slots 5-7 are half-length/full-height. Slot 1 is a x16 (“by
8
16”) slot, both physically and electrically (meaning it operates at the full x16 16GBps
bidirectional speed). Slot 2 is physically x8 but electrically x4 (4GBps). Slots 3-7 are x8
(8GBps) both physically and electrically.
Because the SAS, ServeRAID, dual Gigabit Ethernet, video, and systems management
controllers are all integrated onto the system board, six of the seven adapter slots are
available, which offers you a wide degree of latitude in expansion options.

10 Gigabit Ethernet Virtual Fabric Adapter for IBM
Most x3850 X5 and x3950 X5 systems include one dual-port 10Gb Virtual Fabric adapter.
(It is optional for all other models.) The Emulex Virtual Fabric Adapter is an industry-leading
performance and scalability-per-watt, dual-port network adapter for 10Gbps Ethernet
(10GbE) networks. It offers the benefits and flexibility of I/O convergence in a single end-to-
end solution. Protocol offload for stateless TCP/IP and TCP Chimney provide maximum
bandwidth with minimum use of CPU resources. It achieves line rate 10Gbps performance
with support for TCP/IP stateless offloads and TCP Offload Engine (TOE) support. TOE
reduces system processor utilization, providing increased system performance and reducing
overall system power requirements.
The adapter is based on the Emulex OneConnect Universal Converged Network Adapter
(UCNA) platform that also includes the capability for future upgrades to Fibre Channel over
Ethernet (FCoE) and iSCSI protocol offloads. By using a common infrastructure for Ethernet
and storage networks, data centers can reduce capital expense (CapEx) for adapters,
switches and cables, and operational expense (OpEx) for power, cooling and IT
administration.
End-to-end data protection with hardware parity, CRC, ECC and other advanced error
checking and correcting ensure that data is safe from corruption.
Dual 10Gbps Ethernet ports:
• IPv4/IPv6 TCP, UDP checksum offload; Large Send Offload (LSO); Large Receive

6
Data transfer rates depend on many factors and are often less than the maximum possible.
7
MTBF of 73GB 2.5-inch 10K RPM HDD for the first 12 months = 305,167. MTBF of solid-state SanDisk SDD SATA 5000 2.5-inch
16GB = 918,298.

9


Offload; Receive Side Scaling (RSS); IPV4 TCP Chimney Offload
• VLAN insertion and extraction
• Jumbo frames up to 9000 Bytes
• Preboot eXecutive Environment (PXE) 2.0 network boot support
• Interrupt coalescing
• Load balancing and failover support including adapter fault tolerance (AFT), switch fault
tolerance (SFT), adaptive load balancing (ALB), teaming support and IEEE 802.3ad.
Note: You must have either one SFP+ transceiver or one SFP+ direct-attached cable for
each of the two 10Gb ports on the adapter.

Dual Gigabit Ethernet Controller
The eX5 systems include one integrated dual-port Broadcom 5709C Gigabit Ethernet
controller, with TOE (TCP Offload Engine) acceleration support, as well as load-balancing
and failover capabilities between the two ports.
TOE support helps improve overall system performance by offloading TCP/IP protocol
processing from the system microprocessor to the onboard Ethernet TOE processor.
The controller also supports highly secure remote power management using IPMI 2.0, plus
®
Wake on LAN and PXE (Preboot Execution Environment) flash interface. Optional PCI
adapters offering failover and load balancing between adapters are available for added
throughput and increased system availability.

Hot-Swap/Redundant Components
System availability is maximized through the extensive use of hot-swap and redundant
components, including:
• Hot-swap redundant hard disk drives and solid-state drives
• Hot-swap redundant cooling fans (three redundant pairs)
9
• Hot-swap redundant power supplies

Ultra-Efficient Cooling
Six strategically located hot-swap/redundant fans, combined with efficient airflow paths,
provide highly effective system cooling for the x3850 X5 and x3950 X5 systems, known as
Calibrated Vectored Cooling. The fans are arranged to cool three separate zones, left,
center, and right, with one 120mm fan each in the left and center zones and a pair of
redundant 30mm fans in the third zone. The left and center zones are redundant with fans
contained in the removable power supply units.
The fans automatically adjust speeds in response to changing thermal requirements,
depending on the zone, redundancy, and internal temperatures. When the temperature inside
the server increases, the fans speed up to maintain the proper ambient temperature. When
the temperature returns to a normal operating level, the fans return to their default speed.
Why not simply run the fans at 100% capacity all the time? For several good reasons: to
reduce the ambient noise, reduce the wear-and-tear on the fans and reduce the server power
draw. The reduction in ambient noise and power draw may be relatively minor for a single
server, but if you have a larger number of systems the aggregate savings in power and noise
pressure can be significant.
In addition, the server uses hexagonal ventilation holes in the chassis. Hexagonal holes
can be grouped more densely than round holes, providing greater airflow through the system
cover.
This cooling scheme is important because newer, more powerful processors generate a
significant amount of heat, and heat must be controlled for the system to function properly.

Light Path Diagnostics
Light path diagnostics enables a technician to quickly identify and locate a failed or failing
system component, such as a specific memory DIMM. (Monitored components include
processors, memory, power supplies, fans, HDDs, adapters, and voltage regulator modules
(VRMs), plus system temperature.) This enables quick replacement of the component, which
helps increase server uptime and lower operating costs.
The front of the server has an LED indicator light to show possible component failures. If the
front LED indicates an error condition, by pressing a button on the front of the server an LED

8
Actual throughput will depend on the adapter vendor’s implementation.
9
At 220V both power supplies are redundant; at 110V only limited configurations are redundant.

10


panel will pop out and drop down for easy viewing without the need to open the server cover
or remove the server from the rack. The light path diagnostics panel tells the servicer which
component requires attention. In addition, many components have their own identifying
LEDs. For example, each of the memory modules has an LED next to the socket, as do all
processors, all adapter slots, all fans, all power supplies, all voltage regulator modules and
the service processor, allowing the servicer to easily identify exactly which component needs
servicing. By following the “light path,” the component can be replaced quickly, and without
guesswork. (Note: In the event of a failed DIMM, the system will restart and mark the DIMM
as bad while offline, thus allowing the system to continue running, with reduced memory
capacity, until serviced.)
In addition to the outstanding diagnostic detection, there is a new feature with a digital
readout that indicates at what stage of the boot process your system may have experienced
trouble. This can reduce the troubleshooting time and help get your system up and running
quickly and efficiently.

Energy-Smart Features
IBM servers work hard to keep your energy bills low—from high-efficiency power supplies
and fans to lower-draw processors, memory, and solid-state drives. Technologies such as
these, along with the Xeon 7500/6500 series processors that intelligently adjust their voltage
and frequency, help lower IT costs:
• 95W 8-core Xeon 7500 series processors use 27% less energy than 130W processors.
• 1.5V DDR3 DIMMs consume 10-15% less energy than 1.8V DDR2 DIMMs used in older
servers.
• 1.35V DDR3 DIMMs consume up to 19% less energy than 1.5V DDR3 DIMMs.
• Solid-State Drives consume up to 80% less energy than 2.5-inch HDDs and up to 88%
less than 3.5-inch HDDs.
• On a performance-per-watt basis, High IOPS SSD Adapters outperform enterprise HDDs
10
by up to 445-to-1
• Dynamic fan speeds — In the event of a fan failure, the other fans will run faster to
compensate until the failing fan is replaced. Competitive fans must run faster at all times,
just in case, wasting power.

Other Features
• Trusted Platform Module — This module provides a highly secure start-up process from
power-on through hand-off to the operating system boot loader. ACPI support is provided
to allow ACPI-enabled operating systems to access the security features of this module.
(TCG V1.2-compliant.)
• Eight USB 2.0 ports — Provides flexibility to add high-speed external devices. The USB
2.0 specification supports up to 480Mbps transfer rates. (Note: Not all USB 2.0 devices
are capable of achieving this rate.) Two ports are provided on the front of the server, four
are on the back, and two are internal to support a USB 2.0 Flash Memory Key with
embedded hypervisor
• Toolless slides — Allows quick rack installation and quicker upgrade and servicing of the
server.
• Toolless chassis — The cover can be opened without tools, and many components can
11
be added or replaced without tools, including the processors , DIMMs, hot-swap HDDs,
PCIe adapters, an optional optical drive, and the integrated or optional ServeRAID
controller. This can save a servicer significant time.

Advanced Systems Management Capabilities
The x3850 X5 and x3950 X5 have a high level of systems management capabilities that are
well-suited to remote locations as well as to stand-alone environments. Features include
UEFI, IMM with Virtual Media Key, IBM ToolsCenter, IBM Systems Director Active Energy
®
Manager, Automatic Server Restart, Automatic Node Failover, Wake on LAN support, PXE
support, text console redirect, Predictive Failure Analysis, and IBM Systems Director.
The IMM provides industry-standard Intelligent Platform Management Interface (IPMI) 2.0-
compliant systems management. It provides a number of important system functions,

10
97,014 IOPS / 9W = 10,779 IOPS per watt (160GB/320GB adapters). 196,000 IOPS / 12W = ~16,333 IOPS per watt (640GB
adapters). 400 IOPS / 16.5W = ~24 IOPS per watt (600GB 15K 3.5-inch hot-swap SAS HDD).
11
Although the processor can be installed and removed without tools, IBM provides a special tool to reduce the possibility of
processor socket damage.

11


including:
• Monitoring of system and battery voltage, system temperature, fans, power supplies,
processor and DIMM status
• Fan speed control
• Product ID and Family ID detection
• Highly secure remote power on/off
• System reset control
• NMI/SMI detection and generation
• System diagnostic LED control (power, HDD, activity, alerts, heartbeat)
• IPMI over LAN
• Serial Over LAN
• Proxy server support
• LAN messaging and alerting
• Text console redirection over LAN
• Predictive Failure Analysis for system fans
• Web-based out-of-band control
• SSL (Secure Socket Layer) and LDAP (Lightweight Directory Access Protocol) support
• VLAN support
• Enhanced authentication and encryption algorithms (RMCP+, AES)
• Local update of IMM firmware
• Firmware firewall
• Support for IPMI v2.0 compliant management software (e.g., xCAT)
• Other mandatory and optional IPMI IMM functions
The IMM alerts IBM Systems Director to anomalous environmental factors, such as voltage
and thermal conditions—even if the server has failed.
The x3850 X5 and x3950 X5 also include standard an IBM Virtual Media Key for additional
systems management capabilities, including:
• Latest OS failure screen capture
• Graphical console redirection over LAN
• Remote virtual floppy and CD-ROM
• High-speed remote redirection of PCI video, keyboard and mouse
IBM ToolsCenter consolidates 42 needed tools for managing servers individually into an
integrated suite of 8 tools. They are organized by function: deployment, updates,
configuration and diagnostics. Tools are now simpler to access and use with a single
webpage for access, a common look and feel and a common command line interface for the
scripting tools. The ToolsCenter Bootable Media Creator offers significantly more
functionality than past tools with the ability to add more tools to the bootable image and to
automatically download the bootable environment if needed. Bootable Media Creator allows
you to create bootable CDs, DVD, and USB keys for updates customized to your systems.
Automatic Server Restart (ASR) helps reduce downtime by restarting the server
automatically in the event of a system lockup. If the operating system crashes or the
hardware freezes, it automatically triggers the ASR hardware, which immediately restarts the
server (and logs an ASR event with IBM Systems Director). These features are designed so
that no more than five minutes can pass before the server is restarted.
Automatic Node Failover helps improve the availability of multi-node systems. If one node
of a multinode system experiences a failure, the remaining node will reboot and continue
running.
Wake on LAN permits the server to be remotely powered on if it has been shut off. Once
powered up, the server can be controlled across the network, using the Preboot Execution
Environment (PXE).
Like Wake on LAN, PXE is system firmware. It enables software such as the optional IBM
Remote Deployment Manager to take control of a system before the BIOS, operating
system or applications are loaded (using Wake on LAN/PXE) and lets an administrator
perform many low-level tasks remotely that would otherwise require a visit to each system.
These tasks may include such things as formatting a hard disk drive, updating system
firmware, or deploying a Windows or Linux operating system.
Text and Graphical Console Redirection support allows the administrator to remotely view

12


system text messages and graphics over serial or LAN.
Predictive Failure Analysis (PFA) is designed to allow the eX5 servers to detect impending
failure of supported components (processors, memory, PCIe slots, VRMs, power supplies,
fans, and hard disk drives) before actual failure, and alert the administrator through IBM
Systems Director. This gives you the ability to replace the failing component before it fails,
resulting in increased uptime.
IBM Systems Director software for advanced workgroup management is included standard.
IBM Systems Director comes with a portfolio of tools, including IBM Systems Director
Active Energy Manager, Service and Support Manager, and others. System Availability (a
no-charge download) and Capacity Manager (sold separately) are available as add-ons for
additional server management and increased availability. IBM Systems Director provides a
single uniform graphical interface for all of these systems management functions. IBM
Systems Director enables you to customize thresholds and monitor system components (for
things like temperature, voltage regulation, etc.) to help maximize uptime.
IBM developed IBM Systems Director Active Energy Manager to put control of system
power-saving features at the fingertips of administrators. Active Energy Manager is designed
to take advantage of new features, such as monitoring power usage and balancing the
performance of the system according to available power input. It provides the ability to plan
and predict power consumption based on your hardware configuration. It also helps enable
you to reduce the infrastructure required for redundancy, by using fewer servers on smaller
power feeds and potentially lowering your overall data center support costs. It does this by
inventorying all components, then adding up the total power draw and tracking the usage. It
also includes power management features to help administrators manage or reduce power
usage.

Extensive System Support Features
The IBM services and technical support portfolio provides world-class, consistent, high-
quality service and support. The eX5 servers offer a number of tools and services designed
to make ownership a positive experience. From the start, IBM programs make it easier for
you to plan for, configure and purchase System x servers, get them running and keep them
running long-term. These features include IBM ServerProven, the IBM Standalone Solutions
Configuration Tool, IBM System x and BladeCenter Power Configurator, IBM ServerGuide,
IBM Systems Director Service and Support Manager, Product Customization Services and
extensive technical support offerings.
The IBM ServerProven program provides the confidence that specific options and operating
systems have been tested on the server and are officially supported to work together. It is
updated frequently to ensure that the latest compatibility information is always at your
fingertips.
The IBM Standalone Solutions Configuration Tool (SSCT) is a downloadable tool that
simplifies the often complex chore of configuring a full rack of servers (including blade
servers) and confirming that you have all the cables, power distribution units, KVM (keyboard,
video and mouse) switch boxes and other components you need, as well as the proper
airflow clearances, electrical circuits and other environmental conditions.
IBM System x and BladeCenter Power Configurator helps IT managers plan for data
center power needs, by providing the following information for specific configurations of
System x and BladeCenter systems: power input (watts), PDU sizing (amps), heat output
(BTUs), airflow requirements through chassis (CFM), VA rating, leakage current (mA), and
peak inrush current (amps).
IBM ServerGuide (installed from CD) simplifies the process of installing and configuring
System x servers. ServerGuide goes beyond mere hardware configuration by assisting with
® ®
the automated installation of the Microsoft Windows Server 2008 operating systems, device
drivers and other system components, with minimal user intervention. (Drivers are also
included for support of Novell NetWare, Red Hat Linux and SUSE LINUX.) This focus on
deployment helps you reduce both your total cost of ownership and the complexity that
administrators and technical personnel face.
IBM Systems Director Service and Support Manager (previously called IBM Electronic
™
Service Agent ) is an innovative “call home” feature that allows System x and BladeCenter
servers to automatically report hardware problems to IBM support, which can even dispatch
onsite service if necessary to those customers entitled to onsite support under the terms of
their warranty or an IBM Maintenance Agreement. Service and Support Manager resides on
a server and provides electronic support and problem management capabilities through a
highly secure electronic dialogue between your systems and IBM. It monitors networked
servers for hardware errors and it can perform hardware and software inventories and report
inventory changes to IBM. All information sent to IBM is stored in a highly secure database
and used for improved problem determination.

13


Additional services include hardware warranty upgrades and factory-installed Product
Customization Services (PCS), such as asset tagging, hardware integration, software
imaging and operating systems personalization.
IBM offers extensive technical support by phone and via the Web. Support options include
links to forums/newsgroups, problem submission, online shopping support, service offerings,
device drivers for all IBM product lines, software downloads and even upcoming technical
seminar worldwide schedules and registration. Also available are remote installation,
configuration and usage support for System x hardware and software, as well as onsite
custom services to provide the level of expertise you require.
IBM Maintenance and Technical Support solutions can help you get the most out of your IT
investment by reducing support costs, increasing availability and simplifying management
with integrated support for your multiproduct, multivendor hardware and software
environment. For more information on hardware maintenance, software support, solution
support and managed support, visit http://ibm.com/services/maintenance.

Key Options IBM options for System x servers help you take your servers to
a higher level
You can rely on System x options to supply a complete solution for your business needs.
Options help you create an optimized server system to meet your data protection, storage
and availability needs. Every IBM option is designed and tested for peak performance and
flexibility, helping to maximize your return on investment. The combination of System x
servers and options lets you keep your fingers on the pulse of your e-business.
Processors —Intel Xeon processors provide high clock rates, a choice of 10, 8, 6, or 4
cores, a large L3 cache and advanced features for availability and manageability (processor-
specific). Large cache size, combined with fast 1066MHz memory access, reduces memory
latency and facilitates the movement of data through the processor and I/O devices. (Note:
System performance depends not only on the number of processors in the server but also on
the power and functionality of each processor.) Adding a third, or fourth processor may be a
cost-effective way to achieve significant performance improvements.
Memory — Memory is a significant factor in systems application performance. Adding more
memory to a System x server is one of the most effective ways to increase application
performance. An 8-core processor should have twice as much memory as a 4-core
processor. x3850 X5 and x3950 X5 servers support 64 DIMMs natively and 96 DIMMs using
a MAX5 memory expansion unit, or double that with two nodes and two MAX5 units. 1.35V
DIMMs (machine type 7143) can help reduce energy consumption by up to 19%.
Hard Disk Drives — IBM hard disk drives help customers improve the transaction and cost
performance of their System x servers. The choice of hard disk drives can be a critical aspect
of maximizing the I/O throughput of the system. SAS hard disk drives (2.5-inch) are available
for the eX5 servers with capacities of 500GB at 7,200 RPMs, up to 600GB at 10,000 RPMs,
and 146.8GB at 15,000 RPMs. Enterprise-class 2.5-inch SATA hard disk drives are available
with capacities of up to 500GB at 7,200 RPMs.
Solid State Drives — IBM offers a choice of 50GB or 200GB 1.8” solid-state drives as a
higher reliability, lower-energy-use alternative to internal HDDs. They can be used as a highly
available boot drive, for storing disk images, or for other uses that stress read performance,
such as databases.
High IOPS SSD PCIe Adapters — For storage media offering up to 500 times the I/O
operations per second (IOPS) and up to 7.7 times the bandwidth of 15,000-RPM HDDs, IBM
offers the 160GB High IOPS SS Class SSD PCIe Adapter, the 320GB High IOPS SS Class
SSD PCIe Adapter, the 320GB High IOPS MS Class SSD PCIe Adapter, and the 320GB
High IOPS SD Class SSD PCIe Adapter, as well as the 640GB High IOPS MLC Duo
Adapter. These adapters offer near-DRAM performance, with extremely high data retention
(up to 25 years) and RAID-grade data protection, and can be used in addition to HDDs and
SSDs.
IBM ServeRAID Controllers — System x servers using ServeRAID technology allow
companies to build a reliable foundation for business-critical computing. IBM ServeRAID
technology allows an array consisting of multiple physical hard disk drives to be treated as
one logical drive. ServeRAID technology also allows data to be stored redundantly, across
multiple hard disk drives— enhancing both the integrity and the availability of the data. SAS
and SATA ServeRAID controllers offer enhanced performance due to onboard processors
and cache. Because IBM ServeRAID controllers can help significantly improve data transfer
rates, this technology is extremely effective when implementing demanding, transaction-
oriented applications. By employing the advanced fault tolerance of IBM ServeRAID
technology, companies can effectively implement networked business systems that require
large amounts of storage space for data and applications that must be available for their
businesses to continue operating.

14


Supported SAS/SATA RAID controllers include the IBM ServeRAID-M1015 (x8 PCIe, RAID-
0/1/10), IBM ServeRAID-M5014 (x8 PCIe, 256MB cache, RAID-0/1/10/5/6; optional battery
backup, RAID-50/60 and SED), IBM ServeRAID-M5015 (x8 PCIe, 512MB cache, battery
backup, RAID-0/1/10/5/6; optional RAID-50/60 and SED) and the IBM ServeRAID-M5025 (x8
PCIe, 512MB cache, battery backup, RAID-0/1/10/5/6; optional RAID-50/60 and SED;
supports multiple external IBM System Storage expansion units). The ServeRAID-B5015
controller is optimized for high-IOPS RAID performance with SSDs. The IBM 6Gbps SSD
HBA is optimized for high-IOPS non-RAID performance.
External Storage — The IBM System Storage EXP810 and EXP3000 series expansion
units, as well as the DS3000, DS4000, and DS8000 series storage subsystems and N3000,
N5000, N6000, and N7000 NAS systems, comprise a powerful and broad shared storage
family with integrated management software designed to meet midrange and enterprise
®
needs. In addition, IBM Storwize V7000 is virtual storage that offers high efficiency and
flexibility through built-in SSD optimization and “thin provisioning” technologies.

x3850 X5 / x3950 X5 Images
Front View

120mm Fans
Carrying Handles
Pop-Out Light
USB Path Diagnostics
Ports Panel Hot-Swap
Optical Drives
Power
Drive Button

Rack Release
Button

15


Rear View
Redundant
Hexagonal Ventilation Gb Ethernet H/S Power
Holes Ports Supply Bays

PCIe
Slots

QPI Scalability Management Gb Video Serial USB
Port Ethernet port Port Port Ports

Interior View

Hot-Swap HDD
Fans Bays

Hot-
7 Adapter Swap
Slots Fan

2 Hot-Swap Processors
Power Sockets
Supplies 8 Memory
Card Slots
Hot-
Swap
Fan
Memory Card

16


MAX5 Interior View

16 DIMM
2 Hot-Swap Slots 16 DIMM
Redundant Slots
Power Supply
Bays
(removed)
5 Hot-Swap
Redundant
Fan Modules

x3850 X5 / x3950 X5 Specifications
x3850 X5
x3950 X5
7143-B1x/B2x/B3x/B5x/B6x/ B7x, C1x/C2x
Machine type 7143-D1x/D2x, F1x, H1x/H2x/H3x
7145-1Rx, 2Rx/2Sx, 3Rx, 4Rx/4Sx, 5Rx/5Sx,
7145-4Cx/4Dx/4Fx, 5Gx
ARx

4U / 5U (1 4U 4U / 10U (2 4U
4U / 4U (1 4U chassis/nodes + 1 4U / 8U (2 4U chassis/nodes + 2 1U
Form factor (standard/maximum)
chassis/node) 1U MAX5 memory chassis/nodes) MAX5 memory
expansion unit) expansion units)

Ten-core Xeon
(E7-48xx, E7-88xx) Eight-core Xeon
2.0GHz E7-4850 (X75xx)
Six-core Xeon
(B5x, D1x), 2.0GHz 2.0GHz X7550
(E75xx, E7-48xx) Four-core Xeon
E7-8850 (C1x), (4Cx/4Dx/4Fx/4Rx/4
1.86GHz E7530 (E75xx)
Processor type 2.26GHz E7-4860 Sx), 2.0GHz E7-4820
(2Rx/2Sx), 1.86GHz 1.86GHz E7520
(B6x, D2x, F1x), (B2x), 2.13GHz E7-
E7-4807 (B1x), (1Rx, ARx)
2.26GHz E7-8860 4830 (B3x), 2.26GHz
2.0GHz E7540 (3Rx)
(C2x), 2.4GHz E7- X7560
4870 (B7x, H1x, H2x, (5Gx/5Rx/5Sx)
H3x)

32 (4Cx/4Dx/4Fx/4Rx/4Sx,
Processor cores per chassis 24 (2Rx/2Sx, 3Rx) 16 (1Rx, ARx)
5Gx/5Rx/5Sx)

Processor cores per 2-chassis 64 (4Cx/4Dx/4Fx/4Rx/4Sx,
48 (2Rx/2Sx, 3Rx) 32 (1Rx, ARx)
system 5Gx/5Rx/5Sx)

105W (3Rx,
Maximum processor power draw 130W (5Gx/5Rx/5Sx) 95W (1Rx, 2Rx/2Sx)
4Cx/4Dx/4Fx/4Rx/4Sx)

6.4 GTps (3Rx,
QuickPath Interconnect (QPI)
4Cx/4Dx/4Fx/4Rx/4Sx, 5.86 GTps (2Rx/2Sx) 4.8 GTps (1RxARx)
speed (gigatransfers per second)
5Gx/5Rx/5Sx)

2; up to 8 total (2 chassis)—1Rx, 2Rx, 3Rx, 4; up to 8 total (2 chassis)—2Sx,
# of processors standard /
4Rx, 5Rx, ARx, B1x/B2x/B3x/B5x/B6x/B7x, 4Cx/4Dx/4Fx/4Sx, 5Gx/5Sx, D1x/D2x, F1x,
maximum per chassis
C1x/C2x, H1x H2x/H3x

24MB (2Rx/2Sx,
Internal L3 cache 18MB (3Rx, 5Gx/5Rx/5Sx) 12MB (1Rx, ARx)
4Cx/4Dx/4Fx/4Rx/4Sx)

17

Chipset Intel 7500 & IBM eX5

4 QPI Ports per chassis;
Scalability ports
3 EXA ports (with two MAX5 units)

# of interconnected nodes
2
(chassis) maximum

Maximum memory per node / with
2TB / 4TB
2 nodes

1TB 384GB
512GB
(64 DIMMs x 16GB on 16 (64 DIMMs x 4GB on 8
(32 DIMMs x 16GB on 8
memory cards (2 nodes)— memory cards; 32 x 4GB in
memory cards—H2x
H3x MAX5)—4Cx/4Dx, F1x

40GB
256GB 128GB
(8 x 4GB on 4 memory cards
Standard memory12 (16 DIMMs x 16GB on 4 (32 x 4GB on 8 memory
in chassis; 2 x 4GB in MAX5)
memory cards—H1x cards)—4Fx, 5Gx, D1x/D2x
—2Sx, 4Sx, 5Sx

16GB
(4 x 4GB on 2 memory 8GB
cards)—1Rx, 2Rx, 3Rx, 4Rx, (2 x 4GB on 1 memory —
5Rx, B2x/B3xB5x/ B6x/B7x, card)—B1x,
C1x/C2x

128 / 64 96 / 0 96 / 86
(H3x) (4Cx/4Dx, F1x) (2Sx, 4Sx, 5Sx)

64 / 60
# of DIMM sockets total / available 64 / 62 (1Rx, 2Rx, 3Rx, 4Rx, 5Rx, 64 / 48
B1x) B2x/B3xB5x/B6x/B7x, H1x)
C1x/C2x)

64 / 32
— —
(4Fx, 5Gx, D1x/D2x, H2x)

MAX5 memory expansion unit
1TB (32 x 32GB)
capacity

Maximum memory for 1 node
3TB (96 x 32GB)
plus 1 MAX5 expansion unit

Maximum memory for 2 nodes
plus 2 MAX5 expansion units 6TB (192 x 32GB)
(7143 machine type only)

Supported memory types PC3-10600 DDR3 (1333MHz) ECC RDIMMs

PC3-10600 — PC3-8500 — PC3L-8500 —
PC3L-10600R-999
1333MHz 1066MHz 1066MHz
DIMMs supported — 1333MHz
2GB, 1Rx8, 1.5V 8GB, 4Rx8, 1.5V 16GB, 4Rx4, 1.35V
4GB, 2Rx8, 1.35V
4GB, 2Rx8, 1.5V 16GB, 4Rx4, 1.5V 32GB, 4Rx4, 1.35V

Memory interleaving Yes (up to four-way depending on memory configuration)

Chipkill protection supported Yes (using x4 or x8 DIMMs)

Memory ProteXion supported Yes

Memory rank sparing supported Yes

Memory mirroring supported Yes

Memory scrubbing supported Yes

# of HDD/SSD drive bays total / 8 / 8 2.5-inch HDDs; or
available 16 / 16 1.8-inch SSDs

12
Maximum memory and disk capacity may require the replacement of standard components with the largest supported component
available.

18

# of 5.25" bays total / available 1 / 1 (optional optical drive with SATA interface)

1.8-inch SSD
2.5-inch SAS 2.5-inch SATA
Maximum HDD/SSD capacity 3.2TB (16 x 200GB) hot-
4.8TB (8 x 600GB) hot-swap 4.0TB (8 x 500GB) hot-swap
swap

2.5-inch SAS
Internal HDD/SSD capacities 160, 500GB — 7.2K RPMs; 2.5-inch SATA 1.8-inch SSD
supported 146.8, 300, 600GB — 10K
160, 500GB — 7.2K RPMs 50, 200GB
RPMs;
73.4, 146.8GB — 15K RPMs

1.8-inch SSD
2.5-inch SAS/SATA
HDD / SSD capacity standard 3.2TB (16 x 200GB)—4Fx, 5Gx, D1x/D2x,
4TB (8 x 500GB)—all other models
H1x

160GB High IOPS SS Class SSD PCIe Adapter
Additional Internal SSD storage 320GB High IOPS SD Class SSD PCIe Adapter
via PCIe adapter 320GB High IOPS MS Class SSD PCIe Adapter
640GB High IOPS MS Class SSD PCIe Adapter (via CTO)

16 x 200GB SSD 8 x 600GB 2.5-inch 8 x 600GB 2.5-inch 16 x 600GB 2.5-inch
(D1x/D2x) SAS + 1 x 320GB SAS + 1 x 640GB SAS + 2 x 640GB
# of drives standard
High-IOPS SSD High-IOPS SSD High-IOPS SSD
None (all other Adapter (H1x) Adapter (H2x) Adapter (H3x)
models)

# of optical drives standard None (optional optical drive in dedicated 5.25" UltraBay)

Embedded USB Flash Key
Optional
available

Drive technology Hot-swap SAS/SATA/SSD

External disk drives supported Yes, via optional ServeRAID-M5025 and Fibre Channel adapters

System Storage EXP810, EXP3512, EXP3524 expansion units, DS4200, DS4700, DS4800,
External disk storage devices DS5100, DS5300, DS8100, DS8300, N3300, N3600, N3700, N5200, N5300, N5500, N5600,
supported N6040, N6060, N6070, N7600, N7700, N7800, N7900 storage subsystems, plus XIV and
Storwize V7000

160/320/500 GB RDX Removable Cartridge Backup Ssytem (internal/external)
HH LTO Gen 3 SAS Tape Drive
HH LTO Gen 4 SAS Tape Drive
HH LTO Gen 5 SAS Tape Drive (internal/external)
Backup drives supported DDS-6 USB Tape Drive
System Storage TS2230/TS2240/TS2250/TS2350 Tape Drive
System Storage TS2900 Tape Autoloader
System Storage TS3100/TS3200/TS3500 Tape Library
System Storage TS3310 Modular Tape Library

Integrated RAID controller / cache ServeRAID-BR10i V2 (x8 PCIe, RAID-0/1/1E)

ServeRAID-M1015
(x8 PCIe, no cache, ServeRAID-M5025
RAID-0/1/10) (x8 PCIe, 512MB
ServeRAID-M5015
ServeRAID-M5014 cache, battery
(x8 PCIe, 512MB
ServeRAID-B5015 (x8 PCIe, 256MB backup, RAID-
cache, battery
Optional RAID controllers (x8 PCIe, no cache, cache, RAID- 0/1/10/5/6; optional
backup, RAID-
supported RAID-5) 0/1/10/5/6; optional RAID-50/60 and
0/1/10/5/6; optional
RAID-50/60, battery SED; support for
RAID-50/60 and
6Gbps SSD Host backup, and SED) multiple external IBM
SED)
Bus Adapter (x8 System Storage
PCIe, no cache, no expansion units
RAID)

7 / 6 (all other
# of adapter slots total / available 14 / 10 (H3x) 7 / 7 (ARx) 7 / 5 (H1x/H2x)
models)

# of PCIe physical x16/electrical
1 full-height/full-length per chassis/node
x16 Gen 2 slots (16GBps)

# of PCIe physical x8/electrical x8 2 full-height/full-length / 3 full-height/half-length per chassis/node

19

Gen 2 slots (8GBps)

# of PCIe physical x8/electrical x4
1 full-height/full-length per chassis/node
Gen 2 slots (4GBps)

# of video ports 1

Matrox G200eV graphic controller integrated in IMM
Video controller
(optional nVIDIA 3D DCV graphics card supported)

Video memory 16MB DDR2 SDRAM standard (shared with IMM)

Maximum video resolution at 32- 1024x768 resolution (analog), with a color depth of 32 bits at 100Hz;
bit color 1280x1024 resolution (digital), with a color depth of 32 bits at 75Hz

10 Gigabit Virtual Fabric Adapter Dual-port Emulex NIC integrated (all models except ARx) per chassis/node

Gigabit Ethernet controller Dual-port Broadcom BCM5709C

Network acceleration TOE (1Gb and 10Gb)

Failover / load-balancing-capable Yes / Yes

# of Gigabit Ethernet ports 2 (rear)

# of serial ports 1 (rear)

# of USB 2.0 ports 8 (2 front, 4 rear) ports, plus 2 internal USB connectors for hypervisor

Integrated systems management
IMM
controller

Processors, memory, power supplies, fans, HDDs, adapters, voltage regulator modules (VRMs),
Light path diagnostics support
and system temperature, with external pop-out/drop-down panel

Predictive Failure Analysis Processors, memory, PCIe slots, VRMs, power supplies, fans, hard disk drives, and solid-state
support drives

Power supply size (chassis / 1975W universal, autoswitching, hot-swap (rear 675W universal, autoswitching, hot-swap
MAX5) access)—chassis (rear access)—MAX5

# of power supplies standard /
2 / 2 (chassis) 1 / 2 (MAX5)
maximum (chassis / MAX5)

Hot-swap/redundant power
Yes / Yes
supported (chassis / MAX5)

# of fans/blowers standard /
6 / 6 (chassis) 5 / 5 (MAX5)
maximum

Hot-swap/redundant fans
Yes
supported (chassis)

Rack mount method Slides and Cable Management Arm (provided standard)

7,000 ft;
Maximum altitude
2,133 m

50–90º F; 10–32º C (3,000 ft to 7,000 ft /
Operating temperature range 50–95º F; 10–35º C (up to 3,000 ft / 914.4 m)
914.4m to 2,133m)

Heat emitted: typical / maximum 3753 / 6739 BTUs; ??? BTUs;
(chassis / MAX5) 1100 / 2150 Watts (chassis) ??? Watts (MAX5)

6.8” (172.8mm) H 1.75” (44.4mm) H
Dimensions (chassis / MAX5) 17.5” (444mm) W 17.5” (444mm) W
28.04” (712mm) D 28.35” (720.2mm) D

77 – 110 lbs (maximum) 28.2 – 33.8 lb (maximum)
Weight (chassis / MAX5)
35.3 – 49.9 kg 12.8 – 15.1 kg

Microsoft Windows Server 2008 / R2 (Standard/Web/Enterprise/HPC/Datacenter Editions) 64-
bit; Windows HPC Server 2008; Microsoft Windows Server 2003 / R2 (Datacenter Edition)
Operating systems supported
32/64-bit; Windows SBS 2008 (Standard/Premium Editions); RHEL 5 Server 64-bit (with and
without Xen); RHEL 6 Server 64-bit (without Xen); SLES 10/11 64-bit (with and without Xen);

20

VMware vSphere Hypervisor 4.1 Update 1
13
Length of limited warranty 3 years (parts and labor) (7143 / 7145) 4 years (parts and labor) (7146)

The Bottom Line The eX5 servers are extremely powerful systems, incorporating leading-edge industry-standard
features and adding IBM-unique innovations:
Price/Performance
• High-throughput processors — 2.0 to 2.4GHz 10-core, 2.0 to 2.67GHz 8-core, 1.86 to 2.0GHz
6-core, or 1.86GHz 4-core Xeon processors; up to 40 (10-core), 32 (8-core), 24 (6-core), or 16
(4-core) processor cores per chassis; up to 80 (10-core), 64 (8-core), 48 (6-core), or 32 (4-core)
processor cores per 2-chassis configuration
• Large L3 cache — 30MB, 24MB, 18MB, or 12MB of L3 processor cache (model-specific)
• Huge memory capacity — Up to 2TB in standalone configuration; up to 3TB with MAX5; up to
4TB in 2-node configuration; up to 6TB in 2-node configuration with 2 MAX5 units (7143 machine
type)
• Fast memory access — Up to 1066MHz (processor-specific); up to four-way interleaving and a
low-latency memory controller
• Energy-efficient memory — 1.35V DIMMs supported in 7143 machine type. (Uses low-power
memory buffers as well.)
• Embedded virtualization
• Fast disk technology — SAS/SATA RAID controller (in a dedicated slot) and drives standard
(model dependent)
• Fast SSD technology — Optional SSD-optimized controller and drives
• High-IOPS technology — Standard or optional High IOPS SSD adapters in addition to
HDDs/SSDs
• Fast and flexible communications — Integrated 10GbE Virtual Fabric Adapter and dual-port
Gigabit Ethernet controller, supporting load-balancing and failover, as well as TOE, RDMA,
and iSCSI acceleration
• Fast I/O — PCIe x16 (16Gbps) and x8 (8Gbps) Gen 2 adapter slots
Flexibility
• Scale up or scale out — Scalable on demand, from 2 to 8 processors, 8 to 80 processor cores,
7 to 14 adapter slots, and 32 to 128 DIMMs (using two chassis); or 2 to 4 processors, 8 to 40
processor cores, 7 adapter slots, and 32 to 96 DIMMs (using one chassis and one MAX5); or 2 to
8 processors, 8 to 80 processor cores, 7 to 14 adapter slots, and 32 to 192 DIMMs (using two
chassis and two MAX5 units—7143 machine type only)
• FlexNode partitioning — Allows dynamically repartitioning the system at the node level
• Huge memory capacity — Up to 2TB of DDR3 memory, with 64 DIMM slots per chassis, plus
another 1TB in 32 DIMM slots in a MAX5 expansion unit; expandable to 4TB of RAM, using QPI
scaling and 2 chassis, or 6TB using 2 chassis, EXA scaling, and 2 MAX5 units (7143 machine
type only)
• Integrated flash drive, preloaded with a hypervisor for “instant” virtualization (standard on
selected x3950 X5 models, optional on others)
• A choice of 8 2.5-inch hot-swap SAS/SATA HDDs or 16 1.8-inch hot-swap SSDs internally (per
chassis); up to 16 HDDs or 32 SSDs in a 2-chassis configuration)
• Optional IBM 160GB, 320GB, or 640GB High IOPS SSD Adapters in addition to HDDs and
SDDs for extremely high IOPS and bandwidth storage
• High-performance external I/O expansion — Eight 480Mbps USB 2.0 ports (two front, four
rear, two internal)
• Hardware-based RAID-0/1/1E support standard in most models; optional slotless RAID support
for RAID-10/5/50/6/60 (up to two ServeRAID controllers in a multi-chassis configuration)
• Six available PCIe slots (1 x 16GBps, 5 x 8GBps, 1 x 4Gbps) per chassis in most models, (12
total slots in a 2-chassis configuration)
• Optional optical drive

13
For terms and conditions or copies of the IBM Statement of Limited Warranty, call 800-772-2227 in the U.S. In Canada call 800-
426-2255. IBM makes no representation or warranty regarding third-party products or services including those designated as
ServerProven or ClusterProven. Telephone support may be subject to additional charges. For warranties including onsite labor, a
technician is sent after IBM attempts to resolve the problem remotely. International warranty service is available in any country in
which this product is sold.

21


Manageability, Serviceability and Availability
• IBM Systems Director systems management software, including:
• IBM Systems Director Active Energy Manager
• IBM Service and Support Manager
• Integrated Management Module (IMM):
IPMI 2.0 compliance, including highly secure remote power control
Text console redirection systems management standard
Supports LDAP and SSL industry standards
• Active Memory protection:
Advanced Chipkill ECC memory correction
Memory ProteXion
Spare rank memory
Memory mirroring
Memory scrubbing
• Hardware-based RAID-1/1E disk mirroring standard in a dedicated slot; optional RAID-
10/5/50/6/60 highly available arrays
• Ultra-efficient cooling incorporating Calibrated Vectored Cooling features
• Hot-swap HDDs and/or SSDs
• Hot-swap/redundant power supplies
• Hot-swap/redundant cooling
• Light path diagnostics (front LED panel, drop-down light path panel)
• PFA support for processors, memory, PCIe slots, VRMs, power supplies, fans, hard disk drives,
and solid-state drives
• Toolless chassis and toolless slide design; integrated Cable Management Arm simplify
installation and removal of the server from the rack

Server Comparison Chart
The following table shows the suggested uses for the respective IBM System x rack-optimized servers, including comparisons of the
uses for which each server is best suited:

Requirements Rack-Optimized Servers
High Availability
I/O and Storage
Floating Point

M anagement
Performance

Performance

Deploym ent
Throughput

Distributed
Scalability

System s

Security
M emory

Density
Integer

x3250

x3550

x3620

x3630

x3650

x3690

x3755

x3850

x3950
M3

M3

M3

M3

M3

M3
X5

X5

X5

Theme Key Workloads
Cluster / HPC
3 1 1 2 2 1 3 3 3 3

    Important
Modeling & Simulation
1
2 1 1 1 3 1 3 2 3 3

HPC
High Performance DB 2 2 1 1 1 3 2 2 3 3


Business Intelligence
2 1 1 1 2 1 2 2 1 3


Search
3 1 1 1 2 1 3 3 1 2

     Nice to Have

Web 2.0 /
Content
2 2 2 2 2 1 3 3 2 2

   2

Web 3D
Communities 1 2 2 2 1 1 2 3 2 2

    
Commerce 2 1 1 1 2 1 1 2 1 2

   Can do without
Collaboration 2 3 2 3 2 1 2 3 2 2

    3

ERP/SCM 1 2 1 1 1 2 1 1 1 2


Business
CRM 2 2 2 2 2 2 2 2 1 3

 Best

Applications
Hosted Client 1 3 2 1 2 2 1 1 2 2

      
Point of Sale
3 3 3 2 1 3 1 1 1 1

Branch Office
2 3 3 3 2 2 1 1 2 1

    Better
Virtualization
1 2 2 2 1 2 1 1 2 3


Business Continuity 2 3 3 3 1 2 2 1 2 2

 
Infrastructure
Database 2 2 1 2 1 2 1 2 2 3

  Good
Applications Email/Collaboration
2 3 2 1 2 2 1 1 2 2

  
Security
2 2 2 2 2 1 1 1 1 3

  
Web Serving
3 2 2 2 3 1 2 1 3 3

  
File & Print 2 3 2 3 1 2 2 1 3 3

  

22


For More Information
IBM System x Servers http://ibm.com/systems/x
IBM Systems Director Service and Support Manager http://ibm.com/support/electronic
IBM System x and BladeCenter Power Configurator http://ibm.com/systems/bladecenter/resources/powerconfig.html
IBM Standalone Solutions Configuration Tool http://ibm.com/systems/x/hardware/configtools.html
IBM Configuration and Options Guide http://ibm.com/systems/x/hardware/configtools.html
IBM ServerProven Program http://ibm.com/systems/info/x86servers/serverproven/compat/us
Technical Support http://ibm.com/server/support
Other Technical Support Resources http://ibm.com/systems/support

Legal Information intends to make them available in all countries in which IBM
operates. IBM PROVIDES THIS PUBLICATION “AS IS”
© IBM Corporation 2010 WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
IBM Systems and Technology Group MERCHANTABILITY AND FITNESS FOR A PARTICULAR
Dept. U2SA PURPOSE. Some jurisdictions do not allow disclaimer of
3039 Cornwallis Road express or implied warranties in certain transactions;
Research Triangle Park, NC 27709 therefore, this statement may not apply to you.
Produced in the USA This publication may contain links to third party sites that are
April 2011 not under the control of or maintained by IBM. Access to any
All rights reserved such third party site is at the user's own risk and IBM is not
responsible for the accuracy or reliability of any information,
Warranty Information: For a copy of applicable product data, opinions, advice or statements made on these sites. IBM
warranties, write to: Warranty Information, P.O. Box 12195, provides these links merely as a convenience and the
RTP, NC 27709, Attn: Dept. JDJA/B203. IBM makes no inclusion of such links does not imply an endorsement.
representation or warranty regarding third-party products or
services including those designated as ServerProven or Information in this presentation concerning non-IBM products
®
ClusterProven . Telephone support may be subject to was obtained from the suppliers of these products, published
additional charges. For onsite labor, IBM will attempt to announcement material or other publicly available sources.
diagnose and resolve the problem remotely before sending a IBM has not tested these products and cannot confirm the
technician. accuracy of performance, compatibility or any other claims
related to non-IBM products. Questions on the capabilities of
IBM, the IBM logo, ibm.com, Active Energy Manager, Active non-IBM products should be addressed to the suppliers of
Memory, Chipkill, DB2, Memory ProteXion, OnForever, those products.
ServeRAID, System Storage, Storwize, System x, and
XpandOnDemand are trademarks of IBM Corporation in the MB, GB and TB = 1,000,000, 1,000,000,000 and
United States, other countries, or both. If these and other IBM 1,000,000,000,000 bytes, respectively, when referring to
trademarked terms are marked on their first occurrence in this storage capacity. Accessible capacity is less; up to 3GB is
® ™
information with a trademark symbol ( or ), these symbols used in service partition. Actual storage capacity will vary
indicate U.S. registered or common law trademarks owned by based upon many factors and may be less than stated.
IBM at the time this information was published. Such
Performance is in Internal Throughput Rate (ITR) ratio based
trademarks may also be registered or common law
on measurements and projections using standard IBM
trademarks in other countries. A current list of IBM trademarks
benchmarks in a controlled environment. The actual
is available at http://ibm.com/legal/copytrade.shtml.
throughput that any user will experience will depend on
InfiniBand is a trademark of InfiniBand Trade Association. considerations such as the amount of multiprogramming in the
user’s job stream, the I/O configuration, the storage
Intel and Intel Xeon are trademarks or registered trademarks
configuration and the workload processed. Therefore, no
of Intel Corporation or its subsidiaries in the United States and
assurance can be given that an individual user will achieve
other countries.
throughput improvements equivalent to the performance ratios
Linux is a registered trademark of Linus Torvalds. stated here.
Microsoft, the Windows logo, Hyper-V, SQL Server, and Maximum internal hard disk and memory capacities may
Windows are trademarks or registered trademarks of require the replacement of any standard hard drives and/or
Microsoft Corporation. memory and the population of all hard disk bays and memory
slots with the largest currently supported drives available.
Other company, product and service names may be When referring to variable speed CD-ROMs, CD-Rs, CD-RWs
trademarks or service marks of others. and DVDs, actual playback speed will vary and is often less
IBM reserves the right to change specifications or other than the maximum possible.
product information without notice. References in this
publication to IBM products or services do not imply that IBM
XSO03099-USEN-03

23

IBM System x3850 X5 / x3950 X5 Product Guide

More Related Content

What's hot (18)

Similar to IBM System x3850 X5 / x3950 X5 Product Guide (20)

More from IBM India Smarter Computing (20)

IBM System x3850 X5 / x3950 X5 Product Guide