2nodesoracle12craconyourlaptopvirtualboxstepbystepguide1 0-130627143310-phpapp02

Oracle 12c 2 Nodes sandbox RAC environment on your laptop!
2013.07.05, v1.05
Yury Velikanov
Short Introduction
As result of following this Step by Step Guide you will get the following products up and running on your laptop:
- 2 Nodes Oracle 12c RAC with 3 IPs SCAN infrastructure
o Working even with no network connection ( e.g. airplane, public transport, in a tent ;)
- Oracle Linux Server 6.4
- Oracle Virtual Box 4.2
You should have a laptop with:
- Modern CPU (most of laptops produced after 2011 should be ok)
- 8 GB of RAM
- 40G of free space disk space
o 9GB - Software Staging
o 29GB – 2 VMs + ASMdisks
- Windows 64 bit
o I thinkyoumay use any otherplatformbutyouwill needtofindasolutionfor local DNSimplementationon
your platform (feel free to re-post this guide adding your platform specifics)
o Windows 32 bit: You may run into memory related issues
References
I have usedthe followingtwoarticlesfrom TimHall’s web site www.oracle-base.com as a basis for this guide. I would
appreciate if you keep this reference if you reuse this document for your blog posts or other articles:
 Oracle Database 11g Release 2 (11.2.0.3.0) RAC On Oracle Linux 6.3 Using VirtualBox
 Oracle Linux 6 Installation
About the author
Yury Velikanov - a tall Latvian Russian currently living in Sydney, Australia
working for The Pythian Group (call us ifyou need any help).
Twitter: @yvelik (feel free to let me know ifthis guide worked for you)
FaceBook: yury.velikanov
LinkedIn: yuryvelikanov
SlideShow: yvelikanov
G+: Yury Velikanov
Blog: Pythian
Enough is enough :)
You can leave a feedback here => Feedback: Oracle 12c RAC On your laptop, Step by Step Guide
Introduction
My main goal is to let you get an Oracle 12c RAC sandbox environment up and running on your laptop in a minimal
possible time.
I am sure that Oracle will release VMtemplates,other great community contributors will publish their own guides on
how to ... etc. However if you follow the steps below you will install Oracle 12c RAC database going through main
installationsteps.If you interestedinexploringaparticularinstallationoption you are free to deviate from the instruction
and share yourexperiencewithothers. Atthe time new release and patches will come out you may want to apply a patch
or adjustthisguide tonewrelease.Please returnafavourandpublishyourworksharingyourgreat discovery with the rest
of the community.

Before you start
Software Components
Please note thatthe process thatI describe shouldwork evenif you use other (presumably newer) software versions.
You may needto adjust the process depending on software component you are going to use or available at the time you
implement the configuration.
 Windows 7 64 bit
 Pre-installed Oracle VirtualBox 4.2.12 (it pretty much next, next, next, ready)
o https://www.virtualbox.org/
o 4.2.14 r86644
Note: I have updated to 4.2.16 version as of 2013.07.05. It works ok.
 Pre-installed DualServer 6.94 (Local Windows DNS Server for SCAN)
o http://dhcp-dns-server.sourceforge.net/
o See “DualServer configuration” appendix for how to configure it for the needs of this implementation.
o You will need to adjust a Windows Firewall as described in the appendix bellow to make it working
o Please test the local DNS before installing Oracle software (see “Test setup” under the “DualServer
configuration (do before installing oracle)” section in the Appendix).
 Download Oracle software from eDelivery web site
o Oracle Linux 6.4
 E11882_01.zip => unzip => V37084-01.iso
 http://edelivery.oracle.com/linux
o Oracle Grid Infrastructure and Database 12c (12.1.0.1)
 V38501-01_1of2.zip
 V38501-01_2of2.zip
 V38500-01_1of2.zip
 V38500-01_2of2.zip
 https://edelivery.oracle.com/
Network configuration
I have used the following network setup. Feel free to adjust to your needs:
 Public IPs 10.154.137.0/24
o internal network only
o visible and available to your laptop only even if it isn’t connected to any network
 Interconnect 10.154.138.0/24
o private IPs available from RAC nodes only
 SCAN
o Name => scan-f1.yuryffun.com
o IPs => 10.154.137.115/116/117
 Internet access from RAC nodes (e.g. access to Oracle public yum)

o Just run "ifup eth2" (NAT interface) while connected to an internet
Change log
Remove 70-persistent-net.rules on second node
2013.06.29 Yury: Based on comments on my blog post from r12dba added the following step to the "Create second
node => Adjust network setup" section.
mv /etc/udev/rules.d/70-persistent-net.rules ~/
Installation survey
2013.07.03 Yury: Assed link to after installation survey
More details on DualServer
2013.07.04 Yury: Addedadditional descriptiontothe “DualServerconfiguration (dobefore installingoracle)”sectionin
under “Appendixes” section.
Replace 1GR2 pre-install package with 12c version
Now we use
time yum install -y oracle-rdbms-server-12cR1-preinstall
instead of
time yum install -y oracle-rdbms-server-11gR2-preinstall
Assed “Network adjustments after VBOX Upgrade”
2013.07.04 Yury: Added “Network adjustments after VBOX Upgrade” section to “Appendixes”
Implementation process
Main steps
1. Setup VBOX
2. Create one node
3. Create shared ASMdevices
4. Clone node
5. Install Grid Infrastructure
6. Install Database Software
7. Create Database
8. Enjoy and experiment
Virtual Machine Setup
Setup VBOX
If you didn’t do it yet the installation part is straight forward. Just download the latest version from
https://www.virtualbox.org/ and install (Next, Next, Next ...)
OVB (will use this abbreviation referencing to Oracle Virtual Box)
=> File Preferences => Network => Add host-only network =>
Edit => => IPv4 Address:
10.154.137.1
IPv4 Network Mask
255.255.255.0
OK => OK
Create one node
Node
OVB => Machine => New =>
ol6-12c-rac1
=> Linux => Oracle 64bit => Memory Size

3072
=> Create a virtual hard drive now => VDI => Dynamically allocated =>
F:vboxol6-12c-rac_1ol6-12c-rac1.vdi
30 GB
=> Create
Network setup
OVB => ol6-12c-rac1 => Settings ... => Network =>
Adapter 1 => Host-only Adapter => Enable Network Adapter
Adapter 2 => Internal Network => Enable Network Adapter
Adapter 3 => NAT => Enable Network Adapter
OK
Notes:
 Adapter 1 => Host-only Adapter - Allows to start and access the Cluster even if you are not connected to any
networks
 Adapter 3 - Allows you to get access to the Internet from RAC nodes by starting eth2 adapter
Plug in CDROM
OVB => ol6-12c-rac1 => Settings ... => Storage => Empty => => => V37084-
01.iso
OK
Install Linux
OVB => ol6-12c-rac1 => Machine => Start
Install or upgrade an existing system
Skip => Next => Next => Next => Next => Yes Discard Any Data =>
ol6r01.yuryffun.com
Configure Network =>
System eth0 => Connect Automatically => IPv4 Settings => Method => Manual => Add =>
Address =>
10.154.137.101
Netmask =>
255.255.255.0
Apply...
System eth1 => Connect Automatically => IPv4 Settings => Method => Manual => Add =>
Address =>
10.154.138.101
Netmask =>
255.255.255.0
Apply...
System eth2 => Leave default (DHCP, No Connect Automatically)
Close
Next=> Any time zone => Next=> < root password > => Next
Use All Space => Review and modify partitioning layout

Next
lv_root => Delete
lv_swap => 4096
Free => Mount Point => “/” => File System Type => ext3 => OK
/boot => File System Type => ext3 => OK
Result:
Next => => Write changes to disk
Next => (minimum) Basic Server => Next
(Timing Start 11:17 => Finish 11:25 => 8 mins) => Reboot
Linux post install configuration
putty root@10.154.137.101
echo 10.154.137.101 ol6r01 ol6r01.yuryffun.com >> /etc/hosts
echo 10.154.137.102 ol6r02 ol6r02.yuryffun.com >> /etc/hosts
echo 10.154.138.101 ol6r01-priv ol6r01-priv.yuryffun.com >> /etc/hosts
echo 10.154.138.102 ol6r02-priv ol6r02-priv.yuryffun.com >> /etc/hosts
echo 10.154.137.103 ol6r01-vip ol6r01-vip.yuryffun.com >> /etc/hosts
echo 10.154.137.104 ol6r02-vip ol6r02-vip.yuryffun.com >> /etc/hosts
mv /etc/selinux/config /etc/selinux/config.orig
sed s/SELINUX=enforcing/SELINUX=disabled/g /etc/selinux/config.orig > /etc/selinux/config
service iptables stop
chkconfig iptables off
service ntpd stop
chkconfig ntpd off
mv /etc/ntp.conf /etc/ntp.conf.orig
ifup eth2
Oracle public yum setup
REF: http://public-yum.oracle.com/
OVB => ol6-12c-rac1 => Settings ... => Storage => Empty => => => V37084-
01.iso
mount /dev/cdrom /media/
rpm -Uvf /media/Packages/wget-1.12-1.8.el6.x86_64.rpm
cd /etc/yum.repos.d
wget http://public-yum.oracle.com/public-yum-ol6.repo

RPMs update from yum
time yum install -y oracle-rdbms-server-12cR1-preinstall
# time yum install -y oracle-rdbms-server-11gR2-preinstall # Used in the first guide’s
versions
…
Install 21 Package(s)
…
Complete!
real 7m9.748s
...
time yum update -y
...
Upgrade 117 Package(s)
Total download size: 199 M
...
Error Downloading Packages:
1:java-1.7.0-openjdk-1.7.0.25-2.3.10.3.0.1.el6_4.x86_64: failure: getPackage/java-1.7.0-openjdk-1.7.0.25-
2.3.10.3.0.1.el6_4.x86_64.rpm from ol6_latest: [Errno 256] No more mirrors to try.
1:java-1.6.0-openjdk-1.6.0.0-1.61.1.11.11.el6_4.x86_64: failure: getPackage/java-1.6.0-openjdk-1.6.0.0-
1.61.1.11.11.el6_4.x86_64.rpm from ol6_latest: [Errno 256] No more mirrors to try.
real 34m48.846s
time yum update –y
...
Upgrade 117 Package(s)
...
Complete!
real 3m35.784s
user 2m37.210s
sys 0m28.499s
[root@ol6r01 yum.repos.d]#
time yum update -y
Loaded plugins: security
Setting up Update Process
No Packages marked for Update
real 0m1.170s
user 0m1.021s
sys 0m0.146s
Install additional RPMs
time yum install -y tigervnc-server.x86_64 xclock man kernel-uek-devel parted.x86_64
unzip.x86_64 xterm lsof
Total download size: 17 M
Installed size: 44 M
...
Complete!
real 10m2.364s
user 0m40.615s
sys 0m4.445s
-- Check current kernel version
[root@ol6r01 yum.repos.d]# uname -a
Linux ol6r01.yuryffun.com 2.6.39-400.17.1.el6uek.x86_64 #1 SMP Fri Feb 22 18:16:18 PST 2013 x86_64 x86_64
x86_64 GNU/Linux
Configuring Shared storage
Stop OVB host ol6r01
init 0

-- Create 4 disks
OVB => ol6-12c-rac1 => Settings ... => Storage => Controller SATA =>

Add Hard Drive =>
Create new disk =>
=> VDI => Fixed Size (otherwise you will not be able to make it sharable)
F:vboxol6-12c-rac_1asm1.vdi
5120 MB
=> Create
-- Create 3 more Disks
5120 MB
5120 MB
5120 MB
OK

-- Make the HDDs shareable
OVB => File => Virtual Media Manager => asm1/2/3/4.vdi => Modify => Shareable => Close

VBoxLinuxAdditions
Remove mounted CD ROM
OVB => ol6-12c-rac1 => Settings ... => Storage => CDROM
-- Check if kernel version got updated (otherwise VBoxLinuxAdditions.run phase may fail)
putty root@10.154.137.101
[root@ol6r01 ~]# uname -a
Linux ol6r01.yuryffun.com 2.6.39-400.109.1.el6uek.x86_64 #1 SMP Tue Jun 4 23:21:51 PDT 2013 x86_64 x86_64
x86_64 GNU/Linux
[root@ol6r01 ~]#
OVB => Devices => Install Guest Additions …
mount /dev/cdrom /media/
sh /media/VBoxLinuxAdditions.run
NOTE: You may need to check what path is used for cdrom in your case and mount the right one "ls -l /dev/cdrom*"
[root@ol6r01 ~]# /media/VBoxLinuxAdditions.run
Verifying archive integrity... All good.
Uncompressing VirtualBox 4.2.12 Guest Additions for Linux............
VirtualBox Guest Additions installer
Removing installed version 4.2.12 of VirtualBox Guest Additions...
Copying additional installer modules ...
Installing additional modules ...
Removing existing VirtualBox non-DKMS kernel modules [ OK ]
Building the VirtualBox Guest Additions kernel modules
The headers for the current running kernel were not found. If the following
module compilation fails then this could be the reason.
The missing package can be probably installed with
yum install kernel-uek-devel-2.6.39-400.24.1.el6uek.x86_64
Building the main Guest Additions module [ OK ]
Building the shared folder support module [ OK ]

Building the OpenGL support module [ OK ]
Doing non-kernel setup of the Guest Additions [ OK ]
Starting the VirtualBox Guest Additions [ OK ]
Installing the Window System drivers [FAILED]
(Could not find the X.Org or XFree86 Window System.)
[root@ol6r01 ~]#
============================
NOTE: “Installing the Window System drivers [FAILED]” - could be ignored as we don’t run X Windows.
Configure persistence devices’ naming
[root@ol6r01 ~]# ls -l /dev/sd*
brw-rw---- 1 root disk 8, 0 May 21 16:54 /dev/sda
brw-rw---- 1 root disk 8, 1 May 21 16:54 /dev/sda1
brw-rw---- 1 root disk 8, 16 May 21 16:54 /dev/sdb
brw-rw---- 1 root disk 8, 32 May 21 16:54 /dev/sdc
brw-rw---- 1 root disk 8, 48 May 21 16:54 /dev/sdd
brw-rw---- 1 root disk 8, 64 May 21 16:54 /dev/sde
[root@ol6r01 ~]#
fdisk /dev/sdb
fdisk /dev/sdc
fdisk /dev/sdd
fdisk /dev/sde
"n", "p", "1", "Return", "Return" and "w"
ls -l /dev/sd*
[root@ol6r01 ~]# ls -l /dev/sd*
brw-rw---- 1 root disk 8, 0 May 21 16:54 /dev/sda
brw-rw---- 1 root disk 8, 16 May 21 17:03 /dev/sdb
brw-rw---- 1 root disk 8, 17 May 21 17:03 /dev/sdb1
brw-rw---- 1 root disk 8, 32 May 21 17:03 /dev/sdc
brw-rw---- 1 root disk 8, 33 May 21 17:03 /dev/sdc1
brw-rw---- 1 root disk 8, 48 May 21 17:03 /dev/sdd
brw-rw---- 1 root disk 8, 49 May 21 17:03 /dev/sdd1
brw-rw---- 1 root disk 8, 64 May 21 17:04 /dev/sde
brw-rw---- 1 root disk 8, 65 May 21 17:04 /dev/sde1
[root@ol6r01 ~]#
Configure your UDEV rules
ls -l /etc/scsi_id.config
[root@ol6r01 ~]# ls -l /etc/scsi_id.config
ls: cannot access /etc/scsi_id.config: No such file or directory
echo "options=-g" > /etc/scsi_id.config
/sbin/scsi_id -g -u -d /dev/sdb ; /sbin/scsi_id -g -u -d /dev/sdc ; /sbin/scsi_id -g -u -
d /dev/sdd ; /sbin/scsi_id -g -u -d /dev/sde
[root@ol6r01 ~]# /sbin/scsi_id -g -u -d /dev/sdb ; /sbin/scsi_id -g -u -d /dev/sdc ; /sbin/scsi_id -g -u -d
/dev/sdd ; /sbin/scsi_id -g -u -d /dev/sde
1ATA_VBOX_HARDDISK_VB425c30d2-a5a6fd28
1ATA_VBOX_HARDDISK_VBf3f3b07b-fc36040a
1ATA_VBOX_HARDDISK_VBc1c2a35c-e0d538cc
1ATA_VBOX_HARDDISK_VB23d133e5-2420ccc8
[root@ol6r01 ~]#
cat > /etc/udev/rules.d/99-oracle-asmdevices.rules
KERNEL=="sd?1", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -d /dev/$parent",
RESULT=="1ATA_VBOX_HARDDISK_VB425c30d2-a5a6fd28", NAME="asm-disk1", OWNER="oracle",
GROUP="dba", MODE="0660"
RESULT=="1ATA_VBOX_HARDDISK_VBf3f3b07b-fc36040a", NAME="asm-disk2", OWNER="oracle",

RESULT=="1ATA_VBOX_HARDDISK_VBc1c2a35c-e0d538cc", NAME="asm-disk3", OWNER="oracle",
RESULT=="1ATA_VBOX_HARDDISK_VB23d133e5-2420ccc8", NAME="asm-disk4", OWNER="oracle",
Note: I have restarted the VM. But the following command should do.
/sbin/partprobe /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1
/sbin/udevadm test /block/sdb/sdb1
/sbin/udevadm control --reload-rules
/sbin/start_udev
ls -al /dev/asm*
[root@ol6r01 ~]# ls -al /dev/asm*
brw-rw---- 1 oracle dba 8, 17 May 21 17:22 /dev/asm-disk1
DNC Server configuration
Point to the DualServer IP (see “DualServer configuration”)
echo "search yuryffun.com" > /etc/resolv.conf
echo "nameserver 10.154.137.1" >> /etc/resolv.conf
Test
[root@ol6r01 ~]# dig scan-f1.yuryffun.com
; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.0.2.el6_4.4 <<>> scan-f1.yuryffun.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 57915
;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;scan-f1.yuryffun.com. IN A
;; ANSWER SECTION:
scan-f1.yuryffun.com. 36000 IN A 10.154.137.115
;; Query time: 5 msec
;; SERVER: 10.154.137.1#53(10.154.137.1)
;; WHEN: Wed Jun 26 14:25:47 2013
;; MSG SIZE rcvd: 146
[root@ol6r01 ~]#
Change oracle OS user password
You will need this password later on during the grid infrastructure installation
passwd oracle
Create /u01/app directory
mkdir -p /u01/app
chown oracle:dba /u01/app
Clone the VM
init 0
Copy System HDD
OVB => File => Virtual Media Manager => F:vboxol6-12c-rac_1ol6-12c-rac1.vdi => Copy =>

Next => Next => => Next
=> Close
Create second node
Node
OVB => Machine => New =>
ol6-12c-rac2
Linux => Oracle 64bit =>
3072
Use an existing virtual hard drive file =>
Create
Network setup
OVB => ol6-12c-rac1 => Settings ... => Network =>
Adapter 1 => Host-only Adapter => Enable Network Adapter
Adapter 2 => Internal Network => Enable Network Adapter
Adapter 3 => NAT => Enable Network Adapter
OK
Add Shared devices
OVB => ol6-12c-rac2 => Settings ... => Storage => Controller SATA => Add Hard Disk => Chose existing disk =>
Repeat F:vboxol6-12c-rac_1asm2.vdi

Start second node
Adjust network setup
NOTE: from OVB VMconsole
vi /etc/sysconfig/network
HOSTNAME=ol6r02.yuryffun.com
ifconfig -a | grep eth
Note HWaddr -es
vi /etc/sysconfig/network-scripts/ifcfg-eth0
HWADDR=08:00:27:34:6C:04
IPADDR=10.154.137.102
# Delete => UUID entry
HWADDR=08:00:27:77:1A:03
IPADDR=10.154.138.102
HWADDR=08:00:27:8B:7D:8B
mv /etc/udev/rules.d/70-persistent-net.rules ~/70-persistent-net.rules.orig
reboot
Start first node
putty root@10.154.137.101
putty root@10.154.137.102

Test network from both nodes
ping -c 3 ol6r02
ping -c 3 ol6r02-priv
ping -c 3 ol6r01
ping -c 3 ol6r01-priv
Check UDEV devices from both nodes
ls -al /dev/asm*
[root@ol6r01 ~]# ls -al /dev/asm*
Create a backup of both nodes
Stop both nodes
init 0
OVB => ol6-12c-rac1 => snapshots => Take Snapshot => “OS ready 1”
OVB => ol6-12c-rac2 => snapshots => Take Snapshot => “OS ready 1”
Installing Oracle software
Installing Grid Infrastructure
Configure VBOX shred folder
NOTE: C:Downloads12c - folder with Oracle installation files (archives)
OVB => ol6-12c-rac1 => Settings ... => Shared Folder => Add Shared Folder => Folder Path => C:Downloads12c
=> Folder Name => 12c => Auto-mount => Ok => Ok
OVB => ol6-12c-rac2 => Settings ... => Shared Folder => Add Shared Folder => Folder Path => C:Downloads12c
=> Folder Name => 12c => Auto-mount => Ok => Ok

NOTE: The download folder is mounted automagically to /media/sf_12c/
putty root@10.154.137.101
cd /media/sf_12c/
time unzip -o V38500-01_1of2.zip; time unzip -o V38500-01_2of2.zip; time unzip -o V38501-
01_1of2.zip; time unzip -o V38501-01_2of2.zip; date
real 1m43.338s
real 1m26.440s
real 3m6.112s
real 0m12.735s
rpm -Uvh /media/sf_12c/grid/rpm/cvuqdisk*.rpm
putty root@10.154.137.102
rpm -Uvh /u01/sw/rac_inst/grid/rpm/cvuqdisk*
Check DNS setup
From both hosts
REF: “DNC Server configuration”
[root@ol6r01 sf_12c]# nslookup scan-f1.yuryffun.com
Server: 10.154.137.1
Address: 10.154.137.1#53
Non-authoritative answer:
Name: scan-f1.yuryffun.com
Address: 10.154.137.115
Address: 10.154.137.116
Address: 10.154.137.117
[root@ol6r01 sf_12c]#
Start VNC and Install Grid
NOTE: You may want to make another snapshot at this stage “OS ready 3”
putty root@10.154.137.101
putty root@10.154.137.102
# both nodes
usermod -G oinstall,vboxsf oracle
# node 1
su - oracle
vncserver :1
export DISPLAY=:1
/media/sf_12c/grid/runInstaller
vncviewer => 10.154.137.101:1

2nodesoracle12craconyourlaptopvirtualboxstepbystepguide1 0-130627143310-phpapp02

putty oracle@10.154.137.101
ORAENV_ASK=NO; ORACLE_SID=+ASM1; . oraenv
[oracle@ol6r01 ~]$ crsctl stat res -t
--------------------------------------------------------------------------------
Name Target State Server State details
--------------------------------------------------------------------------------
Local Resources
--------------------------------------------------------------------------------
ora.DATA.dg
ONLINE ONLINE ol6r01 STABLE
ora.LISTENER.lsnr
ora.asm
ONLINE ONLINE ol6r01 Started,STABLE
ONLINE ONLINE ol6r02 Started,STABLE
ora.net1.network
ora.ons
--------------------------------------------------------------------------------
Cluster Resources
--------------------------------------------------------------------------------
ora.LISTENER_SCAN1.lsnr
1 ONLINE ONLINE ol6r02 STABLE
ora.cvu
ora.oc4j
1 OFFLINE OFFLINE STABLE
ora.ol6r01.vip
ora.ol6r02.vip

ora.scan1.vip
ora.scan2.vip
ora.scan3.vip
--------------------------------------------------------------------------------
[oracle@ol6r01 ~]$
Installing Oracle DB Software
export DISPLAY=:1
/media/sf_12c/database/runInstaller
vncviewer => 10.154.137.101:1

[root@ol6r01 sf_12c]# /u01/app/oracle/product/12.1.0/dbhome_1/root.sh
Performing root user operation for Oracle 12c
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/oracle/product/12.1.0/dbhome_1

Enter the full pathname of the local bin directory: [/usr/local/bin]:
The contents of "dbhome" have not changed. No need to overwrite.
The contents of "oraenv" have not changed. No need to overwrite.
The contents of "coraenv" have not changed. No need to overwrite.
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
[root@ol6r02 sf_12c]# /u01/app/oracle/product/12.1.0/dbhome_1/root.sh
Performing root user operation for Oracle 12c
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/oracle/product/12.1.0/dbhome_1
Enter the full pathname of the local bin directory: [/usr/local/bin]:
The contents of "dbhome" have not changed. No need to overwrite.
The contents of "oraenv" have not changed. No need to overwrite.
The contents of "coraenv" have not changed. No need to overwrite.
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.

Creating Database
export DISPLAY=:1
/u01/app/oracle/product/12.1.0/dbhome_1/bin/dbca
vncviewer => 10.154.137.101:1
CAT.yuryffun.com
PAT

Connecting to the database
echo "CAT1:/u01/app/oracle/product/12.1.0/dbhome_1:N:" >> /etc/oratab
ORAENV_ASK=NO; ORACLE_SID=CAT1; . oraenv
sqlplus / as sysdba
[oracle@ol6r01 ~]$ sqlplus / as sysdba
SQL*Plus: Release 12.1.0.1.0 Production on Fri Jun 28 02:11:02 2013
Copyright (c) 1982, 2013, Oracle. All rights reserved.
Connected to:
Oracle Database 12c Enterprise Edition Release 12.1.0.1.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Advanced Analytics and Real Application Testing options
SQL> select banner from v$version;
BANNER
--------------------------------------------------------------------------------
Oracle Database 12c Enterprise Edition Release 12.1.0.1.0 - 64bit Production
PL/SQL Release 12.1.0.1.0 - Production
CORE 12.1.0.1.0 Production
TNS for Linux: Version 12.1.0.1.0 - Production
NLSRTL Version 12.1.0.1.0 - Production
SQL> select INSTANCE_NAME, HOST_NAME from gv$instance;
INSTANCE_NAME HOST_NAME
---------------- ----------------------------------------------------------------

CAT1 ol6r01.yuryffun.com
CAT2 ol6r02.yuryffun.com
SQL>
Enjoy and don’t forget to let me know how did it go :)
Feedback
PLASE ANSWER 3 EASY QUESTIONS here => Feedback: Oracle 12c RAC On your laptop, Step by Step Guide
Email: velikanovs@pythian.com, j.velikanovs@gmail.com
Twitter: @yvelik (feel free to let me know ifthis guide worked for you)
FaceBook: yury.velikanov
LinkedIn: yuryvelikanov
SlideShow: yvelikanov
G+: Yury Velikanov
Blog: Pythian
Enough is enough :)
Appendixes
DualServer configuration (do before installing oracle)
Overview
The following is a short tasks overview that you need to accomplish to setup you DualServer to serve a local DNS
service for SCAN component.
1. Download and install “as administrator” DualServer on your windows workstation (http://dhcp-dns-
server.sourceforge.net/)
2. Make a backup copy of the DualServer.ini file and adjust the parameters mentioned in the “DualServer.ini”
section below
3. Restart the “Dual DHCP DNS Service” windows service
4. Add a Windows firewall rule (see “Windows Local Firewall setup” section).
5. Test the local DNS setup
DualServer.ini
Make a backup copy before adjusting the parameter file. I have highlighted the sections in yellow below to indicate
what parameter you need to change.
notepad [installation path]DualServerDualServer.ini
# in my case "notepad C:progDualServerDualServerDualServer.ini"
[SERVICES]
DNS
;DHCP
...
[LISTEN_ON]
10.154.137.1
# 127.0.0.1
...
[DNS_ALLOWED_HOSTS]
1.0.0.1-255.255.255.254
...
[DOMAIN_NAME]
...
yuryffun.com
...
[DNS_HOSTS]
...
scan-f1=10.154.137.115
scan-f1=10.154.137.116

scan-f1= 10.154.137.117
ol6r01= 10.154.137.111
ol6r01.yuryffun.com= 10.154.137.111
ol6r02= 10.154.137.112
ol6r02.yuryffun.com= 10.154.137.112
ol6r01-vip= 10.154.137.113
ol6r01-vip.yuryffun.com= 10.154.137.113
ol6r02-vip= 10.154.137.114
ol6r02-vip.yuryffun.com= 10.154.137.114
Restart “Dual DHCP DNS Service”
Windows => Search Program => Services => (Right click, Run as Administrator)
Stop and Start the “Dual DHCP DNS Service” service
Windows Local Firewall setup
Windows => Search Program => Firewall => (Right click, Run as
Administrator)

Next => Next
RAC12c_DNS
Optionally you can add Protocol/Port and Scope (see below)

10.154.137.1
10.154.137.0/24
Test setup
From your workstation
cmd
C:Usersvelikanov>nslookup
Default Server: home.gateway.home.gateway
Address: 192.168.1.254
> server 10.154.137.1
Default Server: [10.154.137.1]
Address: 10.154.137.1
> scan-f1.yuryffun.com
Server: [10.154.137.1]
Address: 10.154.137.1
Non-authoritative answer:
Addresses: 10.154.137.115
10.154.137.116
10.154.137.117
>
Cleaning up asm devices
Just in case you would like to repeat unsuccessful install you may want to clean ASMdevices as Oracle will not allow
you to use existing devices.
dd if=/dev/zero bs=8k count=1280 of=/dev/asm-disk1

Network adjustments after VBOX Upgrade
I just upgraded Virtual Box from 4.2.14 to 4.2.16. This is that I had to do to make the setup work.
Note: You may just skip Remove/Add part and jump to reconfiguration. Let me know what way worked for you.
OVB => File => Preferences => Network => Remove
OVB => File => Preferences => Network => Add
OVB => File => Preferences => Network => Edit
Replace default 192.168.56.1 with
10.154.137.1

2nodesoracle12craconyourlaptopvirtualboxstepbystepguide1 0-130627143310-phpapp02

More Related Content

What's hot (18)

Similar to 2nodesoracle12craconyourlaptopvirtualboxstepbystepguide1 0-130627143310-phpapp02 (20)

2nodesoracle12craconyourlaptopvirtualboxstepbystepguide1 0-130627143310-phpapp02