4 g demystified-celplan

4 G Demystified
The Plain Truth about WiMAX and LTE
1© CelPlan Technologies, Inc. – All rights reserved10/6/2010

Biography- Leonhard Korowajczuk
• 40 plus years experience in
Telecommunications R&D & Engineering
(30 years in wireless)
• Designed equipments for
- FDM - PCM
- Switching - Wireless
- Wireless Video - Energy
• Brazilian Telecom Research Center founder
group
White Paper:
“Designing WiMAX
Networks”
Download from
www.celplan.com
group
• Switching and Wireless Director at Elebra
(today Alcatel Brazil)
• CTO Wireless Comsat-Plexsys (USA)
• CEO/CTO CelPlan International (USA)
• CTO Wi4Net (leader in public safety
wireless video surveillance)
• Ten plus patents
• Two wireless technology books
• Hundreds of wireless designs worldwide:
GSM/HSPA, cdma2000/EVDO, WiMAX, LTE,
Satellite, Smart Grids

Technology and Design Training
• WiMAX Forum Certified Training
• WiMAX Forum Network Designer Boot Camp
• November 1 to 3rd
• Reston, VA• Reston, VA
• LTE and WLAN Technology
• November 4th
• Reston, VA
10/6/2010 © CelPlan Technologies, Inc. – All rights reserved 3

Deployment of 4 G networks
• 4G is much more complex than 3 G and requires an in
depth understanding of multi disciplinary subjects
• CelPlan has 20 years of expertise in the wireless
industry, and have design hundreds of networks
• CelPlan provides• CelPlan provides
– Complete portfolio of design tools (CelPlanner Suite)
– Design services from RFP preparation to full network
design
– Specialized consulting
– Advanced training (the only company to have published books about
wireless design and technology)

LTE, WiMAX and WLAN
Network Design, Optimization and
Performance Analysis
• Part A- Basic Concepts
• Part B- Technologies• Part B- Technologies
• Part C- Network Design

Part A- Essential Basic Concepts for 4G
1. Business Plan
2. Data Transmission
3. Market Modeling
4. Signal Processing Fundamentals
5. RF Channel
6. RF Channel Performance Prediction6. RF Channel Performance Prediction
7. OFDM
8. OFDM Implementation
9. Wireless Network Core Equipment
10. Antenna and Advanced Antenna Systems
11. Radio Performance
12. Basic Mathematical Concepts

Part B- 4 G Technologies
1. Wireless LAN
2. WiMAX
3. LTE
4. Broadband Standards Comparison4. Broadband Standards Comparison

Part C-Design of 4 G Wireless Networks
1. Wireless Network Design Steps
2. Wireless Market Modeling
3. Wireless Network Strategy
4. Wireless Network Design4. Wireless Network Design
5. Wireless Network Optimization
6. Wireless Network Performance Assessment

Webinar
• Selected topics about WiMAX and LTE
– Objectives and Claims
– Standards
– Architecture– Architecture
– Technology Comparison and Real Throughput

WiMAX

WiMAX Standards
Project Description
P802.16m Currently in pre-draft stage. It addresses the "Advanced Air Interface”
and is an amendment to projects 802.12-2004 and 802.16e-2005. This
project should result in the creation of WiMAX Release 2 (WiMAX
2.0)
Draft P802.16h Draft amendment under development, addressing “Improved
Coexistence Mechanisms for License-Exempt Operation”
Draft P802.16i Draft amendment under development, addressing “Management Plane
Procedures and Services”
Draft P802.16j Draft amendment under development, addressing “Multihop Relay
Specification”
Draft
P802.16Rev2
Draft under development for the IEEE Standard for Local and
Metropolitan Area Networks - Part 16: Air Interface for Broadband
Wireless Access Systems (this draft consolidates Standards 802.16e-
2005, 802.16-2004 –including Cor1-2005, 802.16f-2005, and
802.16g-2007). When this revision is complete it will supersede Std802.16g-2007). When this revision is complete it will supersede Std
802.16-2004 and all related amendments and corrigenda.
Std 802.16-2004 Active standard. Revision of IEEE Std 802.16 (including 802.16-
2001, 802.16c-2002, and 802.16a-2003). This standard was developed
by the Task Group d under the name P802.16-REVd. The IEEE Std
802.16-2004 revision added the 2-11 GHz range and supported a fixed
FFT of 256 for all bandwidths and an FFT of 2048 for the 20 MHz
bandwidth, but it only targeted fixed subscribers. The shortcomings of
this standard were corrected in IEEE Std. 802.16-2004/Cor1 (2005).
Std 802.16g-2007 Active amendment to 802.16, it addresses “Management Plane
Procedures and Services”
Std 802.16f-2005 Active amendment to 802.16 developed by the Network Management
Task Group, it addresses the “Management Information Base”
Std 802.16e-2005 Active amendment to 802.16 developed by Task Group e, it addresses
“Physical and Medium Access Control Layers for Combined Fixed
and Mobile Operation in Licensed Bands” (including mobility and fast
handover.) This group was working in parallel to IEEE Std. 802.16-
2004 since 2002, aiming to develop a mobile version of the standard.
This became IEEE Std 802.16e/Cor1 amendment and corrigendum
that supports fixed and mobile communications in bands below 6
GHz.
1110/6/2010 © CelPlan Technologies, Inc. – All rights reserved

WiMAX Forum
• The idea behind standards is to allow interoperability amongst
operators
– IEEE standards aim to cover all possible applications
• 802.16 standard supports such a multitude of configuration options and
features that it could lead to non-compatible networks if vendors chose
different implementation options
• Creation of the WiMAX Forum -• Creation of the WiMAX Forum - not-for-profit organization created to divulge and
further standardize WiMAX technology
• WiMAX standard defines only the physical layer (PHY) and the medium
access layer (MAC), not enough to assure network inter-operability
– WiMAX Forum creates guidelines for an end-to-end WiMAX network architecture,
covering roaming and integration with other networks (WLAN and 3G)
– Guidelines are based on IETF RFCs, IEEE standards, DOCSIS (Data Over Cable Service
Interface Specification) security protocols and 3GPP IMS (3rd Generation
Partnership Project- IP Multimedia Subsystem) fixed and mobile convergence
protocol

WiMAX Forum
• The Forum specifies sets of minimum features (profiles) that should be
supported by all vendors, making WiMAX equipment interoperable
– These profiles define mandatory and optional parameters for implementation
in base stations and CPEs
– A certification program was established to certify equipment that fulfill
requirements of each profile
– Certification test profiles were issued in two groups:
• wave 1 (mainly fixed stations features)• wave 1 (mainly fixed stations features)
• wave 2 (mobile station features)
• both wave1 and wave2 certified products are already available
• WiMAX Forum organizes events called Plugfests, in which vendors can
interconnect their equipment to perform interoperability tests

WIMAX Advantage
• Major improvements of WiMAX over traditional 3G
technologies:
– Fully packet switched (IP based)
– Orthogonal Frequency Division Multiplexing (OFDM)
– Time Division Duplexing (TDD)
– Multi level adaptive modulation (up to 64QAM)
– Stronger error correction techniques
– Designed for Advanced Antenna Systems

WiMAX Claims
• 802.16e
– shared rates of up to 70 Mbps;
– cell range of 30 miles;
– spectral efficiency of 3.7 (bit/s)/Hz
• 802.16m
– expected to offer up to 1Gbit/s for fixed users

WiMAX Architecture

WiMAX Spectrum Efficiency
• This table shows how carrier resources are
used and the percentage of resources
allocated for data and for carrier overhead
Carrier Overhead Percentage
Guard Bands 18%
Guard Bands 18%
Pilot DL and UL 23%
Cyclic Prefix 13%
TDD partition 5%
TDD gap 3%
OFDMA preamble and mapping 10%
Total structural overhead 72%
Available for data 28%

WiMAX Spectrum Efficiency
• There is another overhead directly related to
data retrieval - data overhead
• This table shows the minimum and maximum
coding overheadcoding overhead
Data Overhead Minimum Maximum
Coding 17% 50%
MAC overhead 3% 5%
HARQ 10% 15%
Total 30% 70%
Available for data 20% 8%

UMTS-LTE
Universal Mobile
Telecommunications System
Long Term Evolution
EPS- Evolved Packet System
SAE/EPC- System Architecture Evolution/ Evolved Packet Core
LTE/E-UTRAN- Long Term Evolution/ Evolved Universal
Terrestrial Radio Access Network

LTE Objectives
• Co-existence with legacy standards while evolving towards
an all-IP network
• Spectral bandwidth from 1.4 to 20 MHz
• Spectral efficiency three to four times better than HSPA
release 6 in the downlink (4 bit/s/Hz) and 2 to3 times better
than HSPA release 6 in the uplink ( bit/s/Hz)
• Latency smaller than 5 ms for small packets
• High mobility (up to 120 km/h)
• Cell range up to 5, 30 and 100 km
ITU Spectral Efficiency Objectives (bit/s/Hz)
Downlink Uplink
ITU
Scenario LTE LTE- A LTE LTE- A
Indoor
Hotspot 3.0 5.0 2.3 4.0
• Cell range up to 5, 30 and 100 km
• Downlink based on OFDMA (Orthogonal frequency Division
Multiple Access)
• Uplink based on SC-OFDMA (Single-Carrier OFDMA)
• FDD (Frequency Division Duplex and TDD (Time Division
Duplex)
• Bandwidth scalability and multi-band operation
• A new Evolved Packet Core (EPC)
• Simplified architecture and mobility management
• Interworking with existing UTRAN (UMTS Terrestrial Radio
Access Network) systems and other non 3GPP systems
20
Hotspot 3.0 5.0 2.3 4.0
Urban
Micro 2.6 3.1 1.8 2.2
Urban
Macro 2.2 2.8 1.4 1.8
Rural
Macro 1.1 2.6 0.7 2.0

LTE Marketing Claims
Channel
Bandwidth
(MHz)
Downlink
Throughput
(Mbit/s)
Uplink
Throughput
(Mbit/s)
Symbol
duration (µs)
Maximum multipath
delay spread (m)
HSDPA 5 14.4 0.384 0.26 781
HSUPA 5 14.4 5.75 0.26 781
HSPA+ 5 26 11.5 0.26 781
• Reuse of 1
• Self Organizing Networks (SON)
21
LTE 20 300 75 66.67 5,000

Standardization
• General format 3GPP TS SS.NNN vR.XX.YY
• Specifications are aggregated into Releases (Rel)
– Stage 1: The desired service is described from the user’s point of view
– Stage 2: A logical analysis is done, breaking the problem in functional elements and
information flows
– Stage 3: Documentation of the functionality and protocols– Stage 3: Documentation of the functionality and protocols
22
3 GPP
Standard Release date Commercial
introduction
Main Technology
Introduced
Rel-99 March-00 2003 UMTS
Rel-4 Mar-01 none
Rel-5 Oct-02 2006 HSDPA, IMS
Rel-6 Dec-04 2007 HSUPA
Rel-7 Dec-06 2009 HSPA+
Rel-8 Dec-08 2011 (forecast) LTE, EPC, IMS+
Rel-9 Dec-09 2012 (forecast) LTE TDD, MBMS
Rel-10 Mar-11 2013 (forecast) LTE-A, SON
Rel-11 Dec-12 2015 (forecast) TBD

Releases
• Release 8 (December 2008)
– LTE Radio Access Modes
– Transmission Bandwidth
– Peak data rates
– Release 9 includes small enhancements, MBMS (Multimedia– Release 9 includes small enhancements, MBMS (Multimedia
Broadcast Multicast services) and SON (Self Organizing
Networks) was published December 2009
– SON (Self Organizing Networks)
– MBMS (Multimedia Broadcast/ Multicast Service)
– Multi RAT (Radio Access Technology) Internetworking and
System Reselection
– Inter RAT Handover

Releases
• Release 10 (March 2011)
– Backward compatible with LTE
– Bandwidth extension (up to five 20 MHz carriers)
– Spectrum aggregation (aggregation of non-contiguous channels, even from different bands)
– MIMO enhancements
• Uplink spatial multiplexing (up to 4 layers)
• Downlink spatial multiplexing (up to 8 layers)
• Enhanced downlink multi-user MIMO
• Combined non-code-book-based beam-forming and spatial multiplexing
Relay techniques (coverage extension and data rate, multi-frequency repeater like function)– Relay techniques (coverage extension and data rate, multi-frequency repeater like function)
• Creates new cell and self backhauls to donor cell
– Coordinated multipoint reception and transmission
• Scheduling coordination
• Joint transmission and reception
• Reduces inter-cell interference and improves signal strength
– Advanced IP Interconnection of Services
– System Improvements to Machine Type Communications
– Network provided location information for IMS

GSM and UMTS Architecture

EPS (LTE) Architecture

LTE Architecture

SC-OFDMA or DFT-S-OFDMA
• WiMAX requires a large PAPR (Peak to Average Power
Ratio)
• LTE resorted to DFT-S-OFDM (Discrete Fourier
Transform Spread OFDM) to reduce PAPR
• This implied in fixing a minimum size Resource Block
• PAPR was reduced by 2 to 3 dB• PAPR was reduced by 2 to 3 dB
• Throughput inefficiency was increased
1.E-05
1.E-04
1.E-03
1.E-02
1.E-01
1.E+00
1.E+01
0 2 4 6 8 10 12 14
BER
Back-off from average (dB)
PAPR back-off effect on error rate
SC-OFDM
regular OFDM

Multiple Antennas in LTE
29
λ/2 λ/2
4 antenna
elements
Beamforming
8 antenna
elements
Beamforming

Resource Planning in LTE
• Full Reuse
• Hard Reuse
• Fractional Reuse
• Soft Reuse

Self-Organizing Network (SON)
• Self Configuration
– Plug and play detection of the eNB by the gateways and vice versa
– Self configuration of RF transport
– Physical Cell ID (PCI) determination
– Automatic Neighbor Relations (ANR)
– Tracking Area Planning
• Network Operation• Network Operation
– Auto inventory
– Automated Software upgrade
– Self testing and self healing
• Network Optimization
– Load Balancing
– Handover Parameters Optimization
– RF Plan Optimization
– Interference Control
– Energy Savings

WiMAX, LTE Real Performance

General Characteristics

Cyclic Prefix

Modulation Schemes

Framing Characteristics

Framing

Resource Blocks

Maximum Throughput and
Spectral Efficiency

Pilot and Control to Data Symbol Ratio

4 g demystified-celplan

More Related Content

What's hot

Viewers also liked

Similar to 4 g demystified-celplan

More from Muhammad Ali Basra

Recently uploaded

4 g demystified-celplan