4 tooling in cnc
- 1. TOOLING FOR CNC MACHINES • Cutting tools for CNC machines and their design features •Automatic tool changers
- 2. CUTTING TOOLS FOR CNC MACHINES Cutting tools are available in three basic material types: high-speed steel, tungsten carbide, and ceramic. High-speed steel is generally used on aluminium and other nonferrous alloys. Tungsten carbide is used on high-silicon aluminium, steels, stainless steels, and exotic metals. Ceramic inserts are used on hard steels. Inserted carbide tooling is becoming the preferred tooling for many CNC applications.
- 3. DESIGN FEATURES OF CNC TOOLING In general the following points are to be considered while designing of CNC tooling : (a) To give High accuracy. (b) For variety of operations. (c) Quick changing of tools to keep the down time minimum (d) Flexibility. (e) Rigidity of tooling to withstand cutting forces. (f) Rigidity to transmit the power at higher speeds.
- 4. AUTOMATIC TOOL CHANGER (ATC) The CNC machines are designed to perform a number of operations in a single setting of the job. A number of tools may be required for making a complex part. In a manual machine, the tools are changed manually whenever required. In a CNC machine, tools are changed through program instructions. The tools are fitted in a tool magazine or drum. When a tool needs to be changed, the drum rotates to an empty position, approaches the old tool and pulls it. Then it again rotates to position the new tool, fits it and then retracts. This is a typical tool changing sequence of an automatic tool changer (ATC).
- 5. Drum Type For holding small number of tools usually not more than 30, Stored on periphery of drum and tool search speed is faster.
- 6. Chain Type For more number of tools (40 or more), tools search speed is less.