7.[46 53]similarity of inference face matching on angle oriented face recognition

Journal of Information Engineering and Applications www.iiste.org
ISSN 2224-5758 (print) ISSN 2224-896X (online)
Vol 1, No.1, 2011

Similarity of Inference Face Matching On Angle Oriented Face
Recognition
Naga Venkata Jagan Mohan Remani
Research Scholar, Acharya Nagarjuna University
Mobile: +91-9848957141 Email:mohanrnvj@gmail.com
Subba Rao Rachakonda
Professor in Dept of Science and Humanities
Shri Vishnu Engineering College for Women, Bhimavaram-534202, Andhra Pradesh, India
Mobile: +91-9440976619 Email:rsr_vishnu@svcw.edu.in
Raja Sekhara Rao Kurra
Principal, Konearu Laxmiah College of Engineering
Vaddeswaram Guntur-522510, Andhra Pradesh, India
Mobile: +91-9848452344 Email:rajasekhar.kurra@klce.ac.in

Abstract
Face recognition is one of the wide applications of image processing technique. In this paper complete image of
face recognition algorithm is proposed. In the prepared algorithm the local information is extracted using angle
oriented discrete cosine transforms and invokes certain normalization techniques. To increase the Reliability of
the Face detection process, neighborhood pixel information is incorporated into the proposed method. Discrete
Cosine Transform (DCT) are renowned methods are implementing in the field of access control and security are
utilizing the feature extraction capabilities. But these algorithms have certain limitations like poor
discriminatory power and disability to handle large computational load. The face matching classification for the
proposed system is done using various distance measure methods like Euclidean Distance, Manhattan Distance
and Cosine Distance methods and the recognition rate were compared for different distance measures. The
proposed method has been successfully tested on image database which is acquired under variable illumination
and facial expressions. It is observed from the results that use of face matching like various method gives a
recognition rate are high while comparing other methods. Also this study analyzes and compares the obtained
results from the proposed Angle oriented face recognition with threshold based face detector to show the level of
robustness using texture features in the proposed face detector. It was verified that a face recognition based on
textual features can lead to an efficient and more reliable face detection method compared with KLT (Karhunen
Loeve Transform), a threshold face detector.

Keywords: Angle Oriented, Cosine Similarity, Discrete Cosine Transform, Euclidean Distance, Face Matching,
Feature Extraction, Face Recognition, Image texture features.

1. Introduction
Many authors discussed the face recognition by comparing the face of human being with the database and
identifying the features of image. Face Recognition has received considerable attention over past two decades,
where variation caused by illumination is most significant factor that alerts the appearance of face Chellappa et
al., 1995. The database of system consists of individual facial features along with their geometrical relations. So
for the input taken the facial features are compared with the database. If a match is found the face of the person
is said to be recognized. In this process we consider feature extraction capabilities of discrete cosine transform
(DCT) and invoke certain normalization techniques which increase its robust face recognition.

The face recognition falls in to two main categories, Chellappa et al., 1995; they are (i) feature-based and (ii)
holistic. Feature-based approach to face recognition relies on detection and characterization of the individual
facial features like eyes, nose and mouth etc, and their geometrical relationships. On the other hand, holistic
approach to face recognition involves encoding of the entire facial image. Earlier works on face recognition as
discussed by Ziad M.Hafed and Martin Levine 2001, Ting Shan et al 2006, are considered. Alaa Y. Taqa and
Hamid A. Jalab 2010 are proposed color-based or texture-based skin detector approaches.

In this paper we discussed a new computational approach that is converting the input image to database image
using Angle orientation technique in section2. Section 3 deals with the mathematical definition of the discrete
cosine transform its relationship to KLT and Euclidean Distance with Cosine Similarities. The basics of face
recognition system using DCT that includes the details of proposed algorithm and discussion of various
parameters which affect its performance are discussed in section 4. The experimental results of the proposed

46 | P a g e
www.iiste.org

Vol 1, No.1, 2011
system are highlighted in section 5.The conclusion and future perceptives are mentioned in section 6.

2. Angle Orientation

First the input image is selected and compared with the database image. If input image size is not equivalent to
database size, the input image is to be resized to match with the size of database image. We compare the pose of
the image in both input and database images. If the input image is not at an angle of 900 we can’t compare the
images; some authors Ziad. M. Hafed and Martine D. Levine (2001) used eye coordinates techniques to
recognize such an image. In this approach one can identify the feature images of the faces even though they are
angle oriented. If the input image angle is not 900, rotate the image to 900 and then apply normalization
technique such as geometric and illumination technique. Recognition of an image by using rotational axis is
easy to achieve or recognize the face. When the input image rotates from horizontal axis to vertical axis the face
rotates anti-clock wise and the face appears in which it is the same as the database pose, then the object is
recognized. Similarly, when the input image rotates from vertical axis to horizontal axis the face rotates clock
wise and the face appears in which it is the same as the database pose, then the object is recognized. Therefore if
input image is Angle oriented, the pose is changed or Angle is altered using rotational axis and then compared.
The Two types of angle rotations, clock wise and Anti-clock wise, with different angles are given in the images
of Figure.2.1 and Figure 2.2.

Figure2.1: Angle Rotation – Anti Clock Wise Direction

Figure2.2: Angle Rotation – Clock Wise Direction

47 | P a g e
www.iiste.org

Vol 1, No.1, 2011
3. Mathematical Methods
3.0. Discrete Cosine Transform

Discrete cosine transform (DCT) has been used as a feature extraction step in various studies on face
recognition. Until now, discrete cosine transforms have been performed either in a holistic appearance-based
sense [7], or in a local appearance-based sense ignoring the spatial information to some extent during the
classification step by feeding some kind of neural networks with local DCT coefficients or by modelling them
with some kind of statistical tools.

Ahmed, Natarajan, and Rao (1974) first introduced the discrete cosine transform (DCT) in the early seventies.
Ever since, the DCT has grown in popularity, and several variants have been proposed (Rao and Yip, 1990). In
particular, the DCT was categorized by Wang (1984) into four slightly different transformations named DCT-I,
DCT-II, DCT-III, and DCT-IV. Of the four classes we concern with DCT-II suggested by Wang, in this paper.

y k, 1 w k x n cos ,k 1, … , N (3.0.1)

, 1
Where

√

, 2 !
√
(3.0.2)

N is the length of x; x and y of the same size. If x is a matrix, DCT transforms its columns. The series is indexed
from n = 1 and k = 1 instead of the usual n = 0 and k = 0 because vectors run from 1 to N instead of 0 to N-
1.Using the formulae (3.0.1) and (3.0.2) we find the feature vectors of an input sequence using discrete cosine
transform.

3.1. Taxonomy of Face Matching Methods

The main objective of matching methods for measure is to define a value that allows the comparison of feature
vectors (reduced vectors in discrete cosine transform frameworks). With this measure the identification of a new
feature vector will be possible by searching the most similar vector into the database. This is the well-known
nearest-neighbor method. One way to define similarity is to use a measure of distance, d(x, y), in which the
similarity between vectors, S(x, y) is inverse to the distance measure. In the next sub-sections distance measures
are shown Euclidean Distance, Manhattan Distance and Cosine similarity.
3.1.0. Manhattan Distance

Initially, to recognizing a specific input image, the system compares the image’s feature vector to feature vectors
of the database image using a Manhattan distance which is used shortest distance classifier (Paul E, Black,
1987). If the feature vector of the probe is x and that of a database face is y, where x=(x1, x2, x3….xn) and y=
(y1, y2….., yn). The Manhattan distance, d1, between two vectors x, y in an n-dimensional real vector space with
fixed Cartesian coordinate system, is the sum of the lengths of the projections of the line segment between the
points onto the coordinate axes.

Manhattan Distance(x, y) = ", # ∑' ( |" & #|
(3.1.0)

3.1.1. Euclidean Distance:

On the other hand, for recognizing a particular input image, the system compares the image’s feature vector to
the feature vectors of the database image using a Euclidean distance nearest-neighbor classifier (Duda and Hart,
1973). If the feature vector of the probe is x and that of a database face is y, where x=(x1, x2, x3….xn) and y=
(y1, y2…... yn). The position of a point in a Euclidean n-space is a Euclidean vector. So, x and y are Euclidean
vectors, starting from the origin of the space, and their tips indicate two points. The Euclidean norm, or
Euclidean length, or magnitude of a vector measures the length of the vector.

Euclidean Distance (x, y) =√∑' "&#
(3.1.1)

48 | P a g e
www.iiste.org

Vol 1, No.1, 2011

3.1.2. Cosine Similarity

Another face matching distance classifier method where interested is cosine similarity and can be calculated as
follows. For any two given vectors x and y, the cosine similarity, θ, is represented using a dot product and
magnitude as

Cosine Similarity (x, y) = (xTy/||x||.||y||)
(3.1.2)

For face matching, the attribute vectors x and y are usually the term frequency vectors of the images. The cosine
similarity can be seen as a method of normalizing image length during comparison. The resulting similarity
ranges from −1 meaning exactly opposite, to 1 meaning exactly the same, with 0 usually indicating
independence, and in-between values indicating intermediate similarity or dissimilarity.

3.2. Relationship with KLT

Karhunen-Loeve Transform (KLT) is a unitary transform that diagonalizes the covariance or the correlation
matrix of a discrete random sequence. Also it is considered as an optimal transform among all discrete
transforms based on a number of criteria. It is, however, used infrequently as it is dependent on the statistics of
the sequence i.e. when the statistics changes so as the KLT. Because of this signal dependence, generally it has
no fast algorithm. Other discrete transforms such as cosine transform (DCT) even though suboptimal; have been
extremely popular in video coding. The principal reasons for the heavy usage of DCT are that it is signal
independent and it has fast algorithms resulting in efficient implementation. In spite of this, KLT has been used
as a bench mark in evaluating the performance of other transforms. Furthermore, DCT closely approximates the
compact representation ability of the KLT, which makes it a very useful tool for signal representation both in
terms of information packing and in terms of computational complexity due to its data independent nature.

4. Basic Algorithm for Angle Oriented Face Recognition using DCT

The basic algorithm for Angle Oriented Face Recognition discussed in this paper is depicted in figure 3.1. The
algorithm involves both face normalization and Recognization. Mathew Turk and Alex Pentland [15] expanded
the idea of face recognition. It can be seen in the figure 3.1 that the system receives input image of size N x N
and is compared with the size of database image, if the input image and database image are not equal, is to be
resized the image. While implementing an image processing solution, the selection of suitable illumination is a
crucial element in determining the quality of the captured images and can have a huge effect on the subsequent
evaluation of the image. If the pose of the selected image is required to rotate to obtain the database image rotate
the face with an angle θ until it matches with the database image. The rotation of the image may be
bidirectional, clock wise or anti-clock wise, depending on the selected pose of the image.

Once a normalized face obtained, it can be compared with other faces, under the same nominal size, orientation,
position, and illumination conditions. This comparison is based on features extracted using DCT. The input
images are divided into N x N blocks to define the local regions of processing. The N x N two-dimensional
Discrete Cosine Transform (DCT) is used to transform the data into the frequency domain. Thereafter, statistical
operators that calculate various functions of spatial frequency in the block are used to produce a block-level
DCT coefficient.

To recognize a particular input image or face, the system compares this image feature vector to the feature
vector of database faces using a Euclidean Distance nearest neighbor classifier (Duda and Fart, 1973),
Manhattan distance and Cosine Similarity. After obtaining the Manhattan Distance or Euclidean Distances or
Cosine Similarity for N x N Matrix one needs to find the averages of the each column of the matrix, and then
find the average of all these averages, if the overall average is negative we may say there is a match between the
input image and database image.

49 | P a g e
www.iiste.org

Vol 1, No.1, 2011

Figure 4.1: Angle Oriented Face Recognition using DCT
5. Experimental Results

This section is focused on the Discrete Cosine-based face recognition systems using the projection methods and
similarity measures previously presented. Two different face image databases were used in order to test the
recognition ability of each system image database of the Shree Vasista Educational Society.

5.1. Clock wise Rotation

The experimental Results are calculated for various angles of θ in clock wise direction using the three methods
Euclidean distance and Cosine Similarity. The mean recognition values of three methods are measured. Out of a
sample of 13 observations 12 are recognized. The percentage of recognition for DCT with Manhattan distance is
92.30%.

50 | P a g e
www.iiste.org

Vol 1, No.1, 2011
60
40
20
0
-20 1 2 3 4 5 6 7 8 9 10 11 12 13
Euclidean Distance
-40
Cosine Similarity
-60
Manhattan Distance
-80
-100
-120
-140
-160
Figure 5.1 Mean values for Clock Wise Rotation

The obtained data was presented in Figure 5.1. In Figure 5.1 the red line indicates the recognition level for
Cosine Similarity and the blue gives Euclidean distance and green indicates Manhattan distance. It can be
observed that the recognition level of input image in DCT with Manhattan distance is very high. It is also
noticed that as the sample size is increasing the recognition level is also increasing in DCT with Manhattan
distance while comparing with others.

5.2. Anti-Clock Wise Rotation

The same methodology as that of clock wise rotation is maintained in anti-clock wise rotation, as well. The
comparisons of mean recognition values are Manhattan distance; Euclidean distance and Cosine Similarity for
the both methods are calculated for several values of θ using Anti-Clock wise direction. In this method also
Manhattan distance, Euclidean distance has shown high reliability of recognition level. In Figure 5.2 the results
are shown graphically, we can find the rapid decrease in the graph for Manhattan distance, Euclidean distance
and Cosine Similarity which showed with blue colored line indicates the high reliability of recognition of the
input image.
60
40
20
0
1 2 3 4 5 6 7 8 9 10 11 12 13 Manhattan Distance
-20
Euclidean Distance
-40
Cosine Distance
-60
-80
-100
-120
Figure 5.2: Mean values for Anti-clock Rotation

5.3. Comparison between DCT and KLT

The DCT and KLT techniques are experimented under standard execution environment by considering the
synthesized data of the students of Sri Vishnu Educational Society. The Percentage of recognition level in both
the methods of experimental results is shown in Table 4.3.1. The phenomenal growth of DCT reliability is
observed when compared with KLT.

51 | P a g e
www.iiste.org

Vol 1, No.1, 2011
The Performance of recognition level of 10000 records for both the methods of experimental results is given in
Figure 4.3.2. The graph clearly shows that the reliability performance of DCT is constant increasing with respect
to KLT while the number of records is increased.

S. No. No. of records Performance in DCT Performance in KLT
1 1000 91.46 65.42
2 2000 92.01 64.23
3 3000 93.25 52.15
4 4000 94.12 54.12
5 5000 94.62 53.10
6 6000 96.5 52.63
7 7000 97.23 51.71
8 8000 97.56 50.46
9 9000 98.46 50.04
10 10000 98.89 54.13
Table 5.3.1: Performance Records in DCT and KLT

120

100

80

60 Performance in DCT
Performance in KLT
40

20

0
1 2 3 4 5 6 7 8 9 10

Figure 5.3.2: Bar Chart for Performance in DCT and KLT

6. Conclusion and Future Perspectives

Holistic approach to face recognition is used which has involved in encoding the entire facial image. An angle
oriented algorithm which can be rotated either clock wise or anti clock wise directions is proposed and
successfully implemented through the experimental results. The algorithm is proposed with the mean values of
the Euclidian classifiers. It is proved that the proposed angle oriented discrete cosine transform increases the
reliability of the face detection when compared with the KLT.

This approach has applications in Intrusion detection and new technologies like Biometric systems etc. The
authors view a random variable which indicates the magnitude of the recognition level of an image which will
follow some probability distribution.

References

Alaa Y.Taqa and Hamid A.Jalab (2010), “Increasing the Reliability of Fuzzy Inference System Skin Detector”
American Journal of Applied Sciences 7(8):1129-1138.

Alaa Y.Taqa and Hamid A.Jalab (2010),”Increasing the reliability of skin detectors” Scientific Research and
Essays Vol.5 (17), P.P.2480-2490.

52 | P a g e
www.iiste.org

Vol 1, No.1, 2011
Almas Anjum, M., and Yunus Javed M (2006), “Face Images Feature Extraction Analysis for Recognition in
Frequency Domain” Proc. of the 6th WSEAS Int. Conf. on Signal Processing, Computational Geometry &
Artificial Vision, Elounda, Greece.

Annadurai S and Saradha A (2004), “Discrete Cosine Transform Based Face Recognition Using Linear
Discriminate Analysis” Proceedings of International Conference on Intelligent Knowledge Systems.

Chellappa R and Wilson C and Sirohey S (1995), Human and machine recognition of faces: A survey. In Proc.
IEEE, 83(5):705-740.

Duda R O and Hart P E (1973), Pattern Classification and Scene Analysis. Wiley: New York, NY.

Ekenel H K and Stiefelhagen R (2005), “Local Appearance based Face Recognition Using Discrete Cosine
Transform”, EUSIPCO, Antalya, Turkey.

Manhattan distance Paul E Black (1987), Dictionary of Algorithms and Data Structures, NIST.

Nefian A (1999), “A Hidden Markov Model-based Approach for Face Detection and Recognition“, PhD thesis,
Georgia Institute of Technology.

Pan Z and Bolouri H (1999), “High speed face recognition based on discrete cosine transforms and neural
networks”, Technical report, University of Hertfordshire, UK.

Rao K and Yip P (1990), Discrete Cosine Transform-Algorithm, Advantages, Applications. Academic: New
York, N.Y.

Sanderson and Paliwal K K (2003), “Features for robust face based identity verification”, Signal processing,
83(5).

Scott W L (2003), “Block-level Discrete Cosine Transform Coefficients for Autonomic Face Recognition”, P.hd
thesis, Louisiana State University, USA.

Shin D and Lee H S and Kim D (2008), “Illumination-robust face recognition using ridge regressive bilinear
models”, Pattern Recognition Letters, Vol.29, no.1, P.P, 49-58.

Ting Shan and Brain Lovell C and Shaokang Chen (2006), “Face Recognition to Head Pose from One sample
Image” proceedings of the 18th International conference on Pattern Recognition.

Turk M and Pentland A (1991), “Eigen faces for recognition”, Journal of Cognitive Neuroscience, vol.3, no.1,
pp.71-86.

Wang Z (1984), Fast algorithms for the discrete W transform and for the Discrete Fourier Transform. IEEE
Trans. Acoust., Speech, and Signal Proc., 32:803-816.

Ziad Hafed M and Martin Levine (2001), “Face Recognition using Discrete Cosine Transform”, International
Journal of Computer Vision 43(3), 167-188.

53 | P a g e
www.iiste.org

7.[46 53]similarity of inference face matching on angle oriented face recognition

More Related Content

What's hot (15)

Viewers also liked (20)

Similar to 7.[46 53]similarity of inference face matching on angle oriented face recognition (20)

More from Alexander Decker (20)

Recently uploaded (20)

7.[46 53]similarity of inference face matching on angle oriented face recognition