7th generation project report 10 ton plant - Anjali Exim Surat

www.anjaliexim.com [1] info@anjaliexim.com
“Bringing You & Technology Together“
7th GENERATION
“WASTE TYRE RECYCLING PLANT”
Reg. Office:
520-527, Poddar Arcade, Khand Bazar, Varachha Road, Surat-395006, Gujarat, India.
Ph No.: 0261 2554150/51/52 Fax: 0261 2554149

7th
Generation 10 Ton Plant Layout:

Company Profile:
Anjali Exim with its unique renewable technology has come up with a concept of setting new
standard in renewable energy that includes using of waste tyres as a raw material and producing
green fuel oil, carbon black, steel and gas. With global warming and utilization of rubber, it has
now become necessary to recycle the waste and convert it in fuel oil in such a way that it is
environment friendly. This is a unique technology and can change energy market scenario in a
big way.
Anjali Exim has a team of experienced and expert recycling, consulting and marketing
Professionals that work hard for obtaining renewable energy from the waste. Our professionals
have worked in different countries. We are also working in the sector of laser systems, solar
panels, and textile and construction business.
World Market Scenario:
Billions of wastages are available all over the world. We can’t burn or landfill those tyres
due to pollution problems. There is no any other use of these waste tyres. So, we at Anjali Exim
have found a solution for this wastage tyre. We separate all content from wastage tyres and
make it complete renewable process.

Features of the plant:
 100% recycling of tyre wastage is achieved (No churn left after the process)
 No chemical ingredients are used in process (environment friendly)
 During and after the process; no soil, water or air pollution is observed.
 Creates economically valuable products out of wastage tyres (These are an industrial
product that have a good market value and demand)
 The most cost-effective wastage tyre recycling technology in the world.
 Raw material (wastage tyre) is cheap and easy to provide. These are the by-products of
tyre production.
 Each recycled ton of tyres preserves 10 tons of CO2 that is a major green house gas.
 The process can be applied to all rubber based materials.
 The system creates an alternate source of energy to replace petroleum products and
natural gas.
 System gives the opportunity to governments and local administrations to deal with the
wastage tyre problem to a great extent.
 The process of Pyrolysis has duration of 4 to 12 hours, depending on the quantity and
size of tyre (car tyre, truck tyre, etc.). During the process different vacuum values are
applied in pre-determined temperatures and in different phases. Different gases are
obtained and the condensed gas is stored as a fuel-oil in tanks.

The Features of the 7th Generation Plant:
Item. Picture. Features.
Catalyst
Room
Two catalyst rooms, in this way, can
speed up the process of pyrolysis.
Horizontal
Condensers
1
Three horizontal condensers, the cooling
area of one horizontal condenser can be
equaled with more than three vertical
condensers. Moreover, the cooling way is
longer than vertical condenser, in this
way, the oil output will be guaranteed.
Horizontal
Condensers
2
Another two horizontal condensers, the
cooling area are equal and the cooling
result will be better than our fourth
Generation.
Anti back
devices
Two anti back fire devices, it is our second
water seal, and also reuse the exhaust gas
as burning material, two anti back fire
device, more safety, more energy saving.
The Exhaust
Gas
From the picture, you can see the exhaust
gas; it is white, no pollution. It can meet
the emission with the standard required
at the international level.

The Perfect Solution (Pyrolysis Process):
Pyrolysis is the decomposition of organic compounds under oxygen free (anaerobic)
atmosphere that produces gas, oil, carbon black and steel. Efficient industrial pyrolysis is a
process to treat the rubber and industrial plastic wastage as well.
As a result of pyrolysis of wastage tyres one obtains,
 FUEL OIL (45% to 50%)
The main oil product produced by our recycling application is the fuel oil that is widely
used for industrial and commercial purposes. The oil has 45% to 50% of the amount of recycled
scrap tyres, which will be carried with licensed tanker trucks.
 CARBON BLACK (30% to 35%)
Carbon Black is the main product recycled by Pyrolysis technology. The amount of
recycled carbon black is 30% to 35% (depending on the type of tyres) of the total amount of
scrap tyres recycled in the system. Carbon black is used as raw material or main ingredient in
many industries and the chemical structure of carbon black strengthens, lengthens the
endurance, and improves the coloring features of the materials.
Carbon black produced by Pyrolysis process (CBP) is more economical compared to
carbon black produced primarily from petroleum and is more price-efficient to be used as an
ingredient in the industries listed;
 Electric cable jacketing
 Conveyor band
 Carrier Bands
 Hose and doormat
 Black nylon bag, Plastic pipes
 Rubber additive
 Automotive spare parts
 Black colorant in rubber materials
 Industrial rubber products
 Fire fighting

 STEEL WIRE (10% to 15%)
Tyres contain steel wires and the amount ranges from 10% to 15% of the total tyre
wastage. All of the steel present in the tyre can be detached after the Pyrolysis recycling process
is completed. Valuable steel wires are pressed and sold to steel and scrap dealers.
 GAS (5% to 8%)
Non-Condensable gases arise during the pyrolysis process. There are some advantages
such as…..
 It has higher calorific value as compared to natural gas.
 It can be replaced where natural gas and propane are stored.
 The high energy gas may be utilized as a source of energy for the Pyrolysis
process.
 The amount of gas generated in the system is 5% to 8% of the total amount of
recycled tyres and considering the 10 ton scrap tyre/day recycling capacity, the
facility generates 500 - 800 m³/day gas, which has an enormous energy potential
when evaluated.

Technical Detail:
 This is a batch process system.
 The wastage tyres are fed into the reactor vessel and heated under controlled amount of
temperature and pressure.
 The process will bring about molecular restructuring of the rubber under the pyrolysis
process as the result; furnace oil in gaseous form is produced along with other gases.
 These vaporized gases are passed through heat exchanges, wherein the furnace oil is
condensed into liquid form.
 During the process, carbon black and steel are also generated.
 The heat exchanger uses coolant water, as a condensing medium and this water is re-
circulated through process.
 These systems can be operated 24*7/365.
AZ – 150 Waste Tyre Recycling Plant:

AUTO FEEDER:
NEW DESIGN OF CARBON VACUUM SYSTEM & CHIMNEY :

Process Flow Chart:
Scrap Tyre
Stocking
Pyrolysis Unit
Oil Carbon Black Steel Wire Gas
Storage Sleeve Sleeve Burning Unit
Transfer to
Refinery
Carbon Black Storage Chimney
Storage
Magnet
Grinding System
Packing
Stowing
Sale to Market
Pressing
Transfer to
Scrap Dealer

Technical Parameters:
Project ( Dimension : 6.6 *2.6m)
Sr. No. Equipment Specification
1 Equipment Model AZ-150
2 Material Plastic rubber (tyres) life garbage
3 Structure Horizontal tyre revolves
4 Capacity For One Batch About 8-10 tons wastage tyres
5 Oil Yield 45%-50%
6 Carbon Black 30%-35%
7 Steel Wire 10%-15%
8 Gas 5%-8%
9 Work Pressure Normal
10 Main Engine Rotation Speed 0.4 RPM
11 Fuels Choice Coal, Wood, Gas, Oil
12 Power About 35 HP
13 Cooling Method Water
14 Cooling Water Consumption(T/H) Cyclic
15 Type Of Drive External Annual Gear Drive
16 Heating Method Direct
17 Type Of Installation With Foundation
18 Operating Mode Intermittent Operation
19 Reactor Dimension (MM)
(Long*Diameter)
6600*2600
20 Reactor Weight About 28000 Kg.
21 Total Weight About 38 MT

Project Planning & Implementation (For the 10 ton/day capacity):
Land Requirement : 1500 Sq. Meters
Construction Shed : 40Ft * 80 Ft = 3200 Sq. Feet
Water Required : 1000 litres per day
Power Requirement : Without Auto feeder : 20 hp
With Auto feeder : 35 hp
Man Power Planning : Manager-2
Technical-1
Worker-4
Other Arrangements to be made by Client
Storage tank Of oil (Available locally), Civil Work, Local Worker & labour, Hydro crane, Plumber,
Electrician, Gus cutter, Welder.
Terms & Condition:
Delivery Time : Chinese plant 30 days from your order confirmation
Installation Period : 15 days
Warranty Period : 1 Year
After Sales Service : 1 Years Free Service after then AMC Based…
Installation, Training : Included in price.

Reg. Office:
520-527, PODDAR ARCADE,
KHAND BAZAAR, VARACHHA ROAD,
SURAT, 395006, GUJARAT,
INDIA.
Phone: +91 261 2554150/51/52
Fax: +91 261 2554149
Web: www.anjaliexim.com
Thank You . . . !

E-mail: info@anjaliexim.com

7th generation project report 10 ton plant - Anjali Exim Surat

More Related Content

What's hot (20)

Viewers also liked (10)

Similar to 7th generation project report 10 ton plant - Anjali Exim Surat (20)

Recently uploaded (20)

7th generation project report 10 ton plant - Anjali Exim Surat