8112 user manual

Projector

8112

User's Manual (detailed)
Operating Guide

Thank you for purchasing this projector.
WARNING►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” ﬁrst. After reading them, store them in a
safe place for future reference.

About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
CAUTION This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
NOTICE
This entry notices of fear of causing trouble.
Please refer to the pages written following this symbol.
NOTE • The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
Trademark acknowledgment
• Mac® is a registered trademark of Apple Inc.
• Windows® is a registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
• HDMI, the HDMI logo and High-Deﬁnition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
• DVI is a trademark of Digital Display Working Group.
• Trademark PJLink is a trademark applied for trademark rights
in Japan, the United States of America and other countries and
areas.
• Blu-ray DiscTM and Blu-rayTM are trademarks of Blu-ray Disc Association.
All other trademarks are the properties of their respective owners.
1

Contents

Contents
About this manual . . . . . . . . . . . 1
Contents . . . . . . . . . . . . . . . . . . 2
Projector features . . . . . . . . . . . 3
Preparations . . . . . . . . . . . . . . . 3
Checking the contents of package . . . 3
Fastening the lens cover . . . . . . . . . . 4
Part names . . . . . . . . . . . . . . . . 5
Projector . . . . . . . . . . . . . . . . . . . . . . 5
Control panel. . . . . . . . . . . . . . . . . . . 6
Rear panel . . . . . . . . . . . . . . . . . . . . 6
Remote control . . . . . . . . . . . . . . . . . 7
Setting up . . . . . . . . . . . . . . . . . 8
Arrangement . . . . . . . . . . . . . . . . . . . 8
Connecting your devices. . . . . . . . . 10
Connecting power supply . . . . . . . . 14
Using the security bar and slot . . . . 14
Remote control . . . . . . . . . . . . 15
Installing the batteries . . . . . . . . . . . 15
About the remote control signal . . . 15
Changing the frequency of remote
control signal . . . . . . . . . . . . . . . . 16
Power on/off . . . . . . . . . . . . . . 17
Turning on the power . . . . . . . . . . . 17
Turning off the power . . . . . . . . . . . 17
Operating . . . . . . . . . . . . . . . . 18
Adjusting the volume. . . . . . . . . . . . 18
Temporarily muting the sound . . . . . 18
Selecting an input signal . . . . . . . . . 18
Searching an input signal . . . . . . . . 20
Selecting an aspect ratio. . . . . . . . . 20
Adjusting the projector's elevator . . 21
Adjusting the focus . . . . . . . . . . . . . 21
Using the automatic adjustment feature . . . 22
Adjusting the position . . . . . . . . . . . 22
Correcting the keystone distortions . . 23
Using the magnify feature . . . . . . . . 23
Temporarily freezing the screen . . . 24
Temporarily blanking the screen . . 24
Using the menu function . . . . . . . . 25
EASY MENU. . . . . . . . . . . . . . . 27

COLOR TEMP, COLOR, TINT, SHARPNESS,
MY MEMORY

IMAGE menu . . . . . . . . . . . . . . 32
ASPECT, OVER SCAN, V POSITION, H POSITION,
H PHASE, H SIZE, AUTO ADJUST EXECUTE

INPUT menu . . . . . . . . . . . . . . 34
PROGRESSIVE, VIDEO NR, COLOR SPACE,
VIDEO FORMAT, HDMI FORMAT, HDMI RANGE,
COMPUTER IN, FRAME LOCK, RESOLUTION

SETUP menu . . . . . . . . . . . . . . 38
D-ZOOM, D-SHIFT V, D-SHIFT H,
PICTURE POSITION, KEYSTONE,
ECO MODE, MIRROR, STANDBY MODE,
MONITOR OUT

AUDIO menu . . . . . . . . . . . . . . 40
VOLUME, SPEAKER, AUDIO SOURCE,
HDMI AUDIO

SCREEN menu . . . . . . . . . . . . . 41
LANGUAGE, MENU POSITION, BLANK,
START UP, MyScreen, MyScreen Lock,
MESSAGE, SOURCE NAME, TEMPLATE, C.C.

OPTION menu . . . . . . . . . . . . . 47
AUTO SEARCH, DIRECT POWER ON,
AUTO POWER OFF, LAMP TIME,
FILTER TIME, MY BUTTON, MY SOURCE,
SERVICE

NETWORK menu . . . . . . . . . . . 55
SETUP, PROJECTOR NAME, MY IMAGE,
AMX D.D., INFORMATION, SERVICE

SECURITY menu . . . . . . . . . . . 60
SECURITY PASSWORD CHANGE,
MyScreen PASSWORD, PIN LOCK,
TRANSITION DETECTOR, MY TEXT PASSWORD,
MY TEXT DISPLAY, MY TEXT WRITING

Maintenance . . . . . . . . . . . . . . 66
Replacing the lamp . . . . . . . . . . . . . 66
Cleaning and replacing the air ﬁlter . . 68
Replacing the internal clock battery . . 69
Other care . . . . . . . . . . . . . . . . . . . . 70
Troubleshooting . . . . . . . . . . . 71
Related messages . . . . . . . . . . . . . 72
Regarding the indicator lamps . . . . 73
ASPECT, D-ZOOM, KEYSTONE, PICTURE MODE,
Shutting the projector down . . . . . . 75
ECO MODE, MIRROR, RESET, FILTER TIME,
Resetting all settings . . . . . . . . . . . . 75
LANGUAGE, ADVANCED MENU, EXIT
Phenomena that may be easy
PICTURE menu . . . . . . . . . . . . 29
to be mistaken for machine defects . . 75
BRIGHTNESS, CONTRAST, GAMMA,
2

Projector features / Preparations

Projector features
The projector provides you with the broad use by the following features.
The unique optics system produces a large projected image in a short distance,
which provides you with various ways of use.
The double layer filter system is expected to function longer and offers you less
maintenance frequency.
The HDMI port can support various image equipment which have digital interface to
get clearer pictures on a screen.
This projector can be controlled and monitored via LAN connection.
This projector's network supports the PJLinkTM standard.
PJLinkTM is a unified standard for operating and controlling data projectors.
PJLinkTM enables central control of projectors manufactured by different vendors
and projectors can be operated by a controller. PJLinkTM compliant equipment
can be managed and controlled at any time and in any place, regardless of
manufacturer.
For the command of PJLinkTM, see "Technical".
For specifications of PJLinkTM, see the web site of the Japan Business Machine and
Information System Industries Association.
URL: http://pjlink.jbmia.or.jp

Preparations
Checking the contents of package
Your projector should come with the items shown
below. Check that all the items are included. Require
of your dealer immediately if any items are missing.
(1) Remote control with two AA batteries
(2) Power cord
(3) Computer cable
(4) Lens cover and Strap
(5) User’s manual
(6) Security label

(1)

VIDEO

ASPECT

MAGNIFY

(4)

MY SOURCE/
COMPUTER DOC.CAMERA

AUTO

FREEZE

SEARCH

BLANK

PAGE
UP

VOLUME

ON

DOWN

OFF

KEYSTONE

MY BUTTON
1

MUTE

2

MENU

POSITION

ENTER

ESC

(2)

RESET

(5)

(3)
(6)

NOTE • Keep the original packing materials, for future reshipment. Be sure to use the
original packing materials when moving the projector. Use special caution for the lens.

3

Projector features / Preparations

Fastening the lens cover

Strap hole

To avoid losing the cover, please fasten the lens
cover to the projector using the included strap.

Lens cover
Strap slit

the
to
strap hole as shown
1. Fastenﬁgurestrapstepthe Please note that the
in the
for
1.
knot on the strap is used to fasten it to the
lens cover in step 2.

2.

Put the strap end into the slit of the lens
cover with the knot on the side of the lens.
Make sure that the strap is inserted to the
end of the slit.

1

2
Strap

CAUTION ►Do not hang the lens cover in
front of the lens when the projector is mounted
upside down such as when mounted on the
ceiling. Otherwise, the lens cover may block the
light from the projector or hit the lens, which may
cause damage to it. When mounting the projector
upside down, hang the lens cover on the side of the
projector or place it on the projector. For instance,
wrap the strap around the elevator foot to hang the
lens cover (refer to the ﬁgure).

Please check the following web address where you may find the
latest information for this projector.
www.dukane.com/av

DUKANE CORP
Audio Visual Products
2900 Dukane Drive
St. Charles, Illinois 60174
4

www.dukane.com/av
Toll-free: 888-245-1966
Fax: 630-584-5156
E-mail: avsales@dukane.com

Part names

Part names

(1)

HOT!

(3) (8) (9)

Projector
(1) Lamp cover ( 66)
The lamp unit is inside.
(2) Focus ring ( 21)
(3) Control panel ( 6)
(6)
(4) Elevator buttons (x 2) ( 21)
(2) (7)
(5) Elevator feet (x 2) ( 21)
(6) Remote sensor ( 15)
(7) Lens ( 70)
(8) Intake vents
(9) Filter cover ( 68)
The air ﬁlter and intake vent are
inside.
(10) Speaker ( 40)
(11) Exhaust vent
(15)
(12) AC IN (AC inlet) ( 14)
(13)
(13) Rear panel ( 6)
(14)
(14) Security bar ( 14)
(15) Security slot ( 14)
(17)
(16) Strap hole ( 4)
(17) Battery cover ( 69)

(10)

(16)
(5)

(4)

(12)
(11)

HOT!

WARNING ►HOT! : Do not touch around the lamp cover and the exhaust
vent during use or just after use, since it is too hot.
►Do not look into the lens or vent while the lamp is on, since the strong light is
not good for your eyes.
►Do not handle the elevator buttons without holding the projector, since the
projector may drop down.
CAUTION ►Maintain normal ventilation to prevent the projector from
heating up. Do not cover, block or plug up the vents. Do not place anything that
can stick or be sucked to the vents, around the intake vents. Clean the air ﬁlter
periodically.
►Do not use the security bar and slot to prevent the projector from falling down,
since it is not designed for it.
5

Part names

Control panel
(6)

(1) STANDBY/ON button ( 17)
(2) INPUT button ( 18, 25)
(3) MENU button ( 25)
It consists of four cursor buttons.
(4) POWER indicator ( 14, 17, 73)
(5) TEMP indicator ( 73)
(6) LAMP indicator ( 73)

Rear panel

(

STANDBY/ON

INPUT

MENU

LAMP
TEMP
POWER

(1)

(2)

(3) (5) (4)

10)

(1) AUDIO IN1 port
(2) AUDIO IN2 port
(3) COMPUTER IN1 port
(4) COMPUTER IN2 port
(5) MONITOR OUT port
(6) Shutdown switch ( 75)
(7) CONTROL port

(12)

(13)

(8) VIDEO port
(9) S-VIDEO port
(10) AUDIO IN3 (R, L) ports
(11) AUDIO OUT (R, L) ports
(12) HDMI port
(13) LAN port

(3)

(7)

(4)

(6)

(5)

LAN
HDMI

(9)

(8)

(2) (1) (10)

(11)

CAUTION ►Use the shutdown switch only when the projector is not
turned off by normal procedure, since pushing this switch stops operation of the
projector without cooling it down.
6

Part names

Remote control
(1) VIDEO button ( 19)
(2) COMPUTER button ( 19)
(3) SEARCH button ( 20)
(4) STANDBY/ON button ( 17)
(5) ASPECT button ( 20)
(6) AUTO button ( 22)
(7) BLANK button ( 24)
(8) MAGNIFY - ON button ( 23)
(9) MAGNIFY - OFF button ( 16, 23)
(10) MY SOURCE/DOC.CAMERA button (
(11) VOLUME - button ( 16, 18)
(12) PAGE UP button *
(13) PAGE DOWN button *
(14) VOLUME + button ( 18)
(15) MUTE button ( 18)
(16) FREEZE button ( 24)
(17) MY BUTTON - 1 button ( 49)
(18) MY BUTTON - 2 button ( 49)
(19) KEYSTONE button ( 23)
(20) POSITION button ( 22, 26)
(21) MENU button ( 25)
(22) ▲/▼/◄/► cursor buttons ( 25)
(23) ENTER button ( 25)
(24) ESC button ( 25)
(25) RESET button ( 25)
(26) Battery cover ( 15)

19, 49)

(2)
(1)
(6)
(5)
(16)
(8)
(9)
(19)
(17)
(20)
(22)

VIDEO

ASPECT

MAGNIFY

(10)
(4)
(3)
(7)
(12)
(14)
(11)
(13)
(15)
(18)
(21)
(23)
(25)

MY SOURCE/
COMPUTER DOC.CAMERA

AUTO

FREEZE

SEARCH

BLANK

PAGE
UP

VOLUME

ON

DOWN

OFF

KEYSTONE

MY BUTTON
1

MUTE

2

MENU

POSITION

ENTER

ESC

RESET

(24)

(26)

Back of
the remote control

NOTE • Any button marked with “*” is not supported on this projector (

72).

7

Setting up

Setting up
Install the projector according to the environment and manner the projector will be used in.

Arrangement
Refer to the illustrations and tables below to determine screen size and projection distance.
The values shown in the table are calculated for a full size screen: 1024 x 768
a Screen size (diagonal) b Projection distance (±8%)
c1 , c2 Screen height
• On a horizontal surface

a
c2
c1
b

• Suspended from the ceiling
b
c1
a

c2

Screen size
a (diagonal)
type(inch) m
60
70
80
90
100

1.5
1.8
2.0
2.3
2.5

b
Projection distance
m
inch
0.595
0.704
0.814
0.923
1.033

23.4
27.7
32.0
36.3
40.7

c1
Screen height
m
inch
0.157
0.172
0.187
0.203
0.218

6.2
6.8
7.4
8.0
8.6

c2
Screen height
m
inch
1.071
1.239
1.407
1.574
1.742

42.2
48.8
55.4
62.0
68.6

• Keep a space of 30 cm or more between the sides of the
projector and other objects such as walls. Do not place or
attach anything that would block the lens or vent holes.
• For the case of installation in a special state such as
ceiling mount, the speciﬁed mounting accessories and
service may be required. Before installing the projector,
consult your dealer about your installation.

• The screen position may shift after installation if the projector is suspended from the
ceiling or other location due to the ﬂexibility of the plastic projector body. If readjustment
is necessary, consult with your dealer or service personnel.
• The projected image position and/or focus may change during warm-up (approx. 30
minutes after the lamp is turned on) or when the ambient conditions change. Readjust
the image position and/or focus as necessary.
• Since the projector features an ultra short throw, be aware that it is required to select a
screen carefully to have better performance.
- A soft screen such as a pull-down screen may cause serious distortion of a projected image.
A hard screen such as a board screen is recommended for use with this projector.
- A high-gain screen such as a bead screen that has narrow viewing angle is not suitable
for this projector. A low-gain screen (around 1.0) such as a matte screen that has wide
viewing angle is recommended for use with this projector.
- A screen with a weave pattern may cause moiré on the projected image, which is not a
failure of the projector. A screen that has less moiré effects is recommended for use with
this projector.

8

Setting up

Arrangement (continued)
WARNING ►Place the projector in a stable horizontal position. If the
projector falls or is knocked over, it could cause injury and/or damage to the
projector. Using a damaged projector could then result in fire and/or electric
shock.
• Do not place the projector on an unstable, slanted or vibrational surface such
as a wobbly or inclined stand.
• Do not place the projector on its side, front or rear position.
• Consult with your dealer before a special installation such as suspending from
a ceiling or somewhere else.
►Place the projector in a cool place, and ensure that there is sufficient
ventilation. The high temperature of the projector could cause fire, burns and/or
malfunction of the projector.
• Do not place or attach anything that would block the lens or vent holes.
• Keep a space of 30 cm or more between the sides of the projector and other
objects such as walls.
• Do not place the projector on metallic thing or anything weak in heat.
• Do not place the projector on carpet, cushions or bedding.
• Do not place the projector in direct sunlight or near hot objects such as heaters.
Do not place the projector where the air from an air conditioner or similar unit
will blow on it directly.
• Do not place anything near the projector lens or vents, or on top of the projector.
• Do not place anything that may be sucked into or stick to the vents on the bottom
of the projector. This projector has some intake vents also on the bottom.
►Do not place the projector anyplace where it may get wet. Getting the projector
wet or inserting liquid into the projector could cause fire, electric shock and/or
• Do not place the projector in a bathroom or the outdoors.
• Do not place anything containing liquid near the projector.
►Use only the mounting accessories the manufacturer specified, and leave
installing and removing the projector with the mounting accessories to the
service personnel.
• Read and keep the user’s manual of the mounting accessories used.
CAUTION ►Avoid placing the projector in smoky, humid or dusty place.
Placing the projector in such places could cause fire, electric shock and/or
• Do not place the projector near humidifiers, smoking spaces or a kitchen.
►Position the projector to prevent light from directly hitting the projector's remote
sensor.
►Do not place the product in a place where radio interference may be caused.
►Do not place this product in a magnetic field.
NOTE • The projector may make a rattling sound when tilted, moved or shaken,
since a flap to control the air flow inside of the projector has moved. Be aware that
this is not a failure or malfunction.
9

Setting up

Connecting your devices
Be sure to read the manuals for devices before connecting them to the projector.
Make sure that all the devices are suitable to be connected with this product, and
prepare the cables required to connect. Please refer to the following illustrations
to connect them.
Monitor

PC
AUDIO OUT

RGB OUT

AUDIO OUT

RGB OUT

RS-232C

RGB IN

LAN
HDMI

Speakers
HDMI

S-VIDEO OUT

L
R
AUDIO OUT

VIDEO OUT

L
R
AUDIO OUT

L
R
AUDIO OUT

Y
CB/PB CR/PR
COMPONENT VIDEO OUT

VCR/DVD/Blu-ray Disc player

10

L
R
AUDIO IN

(with an
ampliﬁer)

Setting up

Connecting your devices (continued)
To use network functions of the projector, connect the LAN port to the computer's
LAN port.
To use NETWORK BRIDGE function, also connect the CONTROL port and an
RS-232C port of the external device to communicate as a network terminal. See
the User's Manual - Network Guide for details of network functions.
PC
LAN

External device
RS-232C

LAN
HDMI

WARNING ►Do not disassemble or modify the projector and accessories.
►Be careful not to damage the cables, and do not use damaged cables.
CAUTION ►Turn off all devices and unplug their power cords prior to
connecting them to projector. Connecting a live device to the projector may
generate extremely loud noises or other abnormalities that may result in
malfunction or damage to the device and the projector.
►Use appropriate accessory or designated cables. Ask your dealer about nonaccessory cables which may be required a specific length or a ferrite core by
the regulations. For cables with a core only at one end, connect the end with
the core to the projector.
►Make sure that devices are connected to the correct ports. An incorrect
connection may result in malfunction or damage to the device and the projector.
►Be sure to consult the administrator of the network. Do not connect LAN port
to any network that might have the excessive voltage.
NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the
input ports of the projector are recessed.
NOTE • The COMPUTER IN1/2 port can support a component signal also. The specific
adapter or the specific cable is required for a component video input to the projector.

11

Setting up

NOTE • Be sure to read the manuals for devices before connecting them to
the projector, and make sure that all the devices are suitable to be connected
with this product. Before connecting to a PC, check the signal level, the signal
timing, and the resolution.
- Some signal may need an adapter to input this projector.
- Some PCs have multiple screen display modes that may include some signals
which are not supported by this projector.
- Although the projector can display signals with resolution up to UXGA
(1600X1200), the signal will be converted to the projector’s panel resolution
before being displayed. The best display performance will be achieved if the
resolutions of the input signal and the projector panel are identical.
• While connecting, make sure that the shape of the cable's connector ﬁts the
port to connect with. And be sure to tighten the screws on connectors with
screws.
• When connecting a laptop PC to the projector, be sure to activate the PC’s
external RGB output. (Set the laptop PC to CRT display or to simultaneous
LCD and CRT display.) For details on how this is done, please refer to the
instruction manual of the corresponding laptop PC.
• When the picture resolution is changed on a PC depending on an input,
automatic adjustment function may take some time and may not be completed.
In this case, you may not be able to see a check box to select “Yes/No” for the
new resolution on Windows. Then the resolution will go back to the original.
It might be recommended to use other CRT or LCD monitors to change the
resolution.
• In some cases, this projector may not display a proper picture or display
any picture on screen. For example, automatic adjustment may not function
correctly with some input signals. An input signal of composite sync or sync on
G may confuse this projector, so the projector may not display a proper picture.
• The HDMI port of this model is compatible with HDCP (High-bandwidth Digital
Content Protection) and therefore capable of displaying a video signal from
HDCP compatible DVD players or the like.

12

Setting up

About Plug-and-Play capability
Plug-and-Play is a system composed of a PC, its operating system and
peripheral equipment (i.e. display devices). This projector is VESA DDC 2B
compatible. Plug-and-Play can be used by connecting this projector to a PC
that is VESA DDC (display data channel) compatible.
• Take advantage of this feature by connecting a computer cable to the
COMPUTER IN1 port (DDC 2B compatible). Plug-and-Play may not work
properly if any other type of connection is attempted.
• Please use the standard drivers in your PC as this projector is a Plug-andPlay monitor.
NOTE for HDMI
• The HDMI supports the following signals.
-Video signal : 480i@60,480p@60,576i@50,576p@50,720p@50/60,1080i@50
/60,1080p@50/60
-PC signals : See User's Manual(detailed) - Technical
• This projector can be connected with another equipment that has HDMI or
DVI connector, but with some equipment the projector may not work properly,
something like no video.
• Be sure to use an HDMI cable that has the HDMI logo.
• When the projector is connected with a device having DVI connector, use a
DVI to HDMI cable to connect with the HDMI input.

13

Setting up

Connecting power supply
the connector
1. Put IN (AC inlet) ofof the power cord into the
AC
the projector.
the power cord’s
2. Firmly plug couple of secondsplug into the
outlet. In a
after the
power supply connection, the POWER
indicator will light up in steady orange.
Please remember that when the DIRECT POWER
ON function activated ( 47), the connection of the
power supply make the projector turn on.

AC IN

Power cord

WARNING ►Please use extra caution when connecting the power cord, as
incorrect or faulty connections may result in ﬁre and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, consult
your dealer to get a new one.
• Only plug the power cord into an outlet whose voltage is matched to the power
cord. The power outlet should be close to the projector and easily accessible.
Remove the power cord for complete separation.
• Never modify the power cord.

Using the security bar and slot
A commercial anti-theft chain or wire up to
10 mm in diameter can be attached to the
security bar on the projector.
Also this product has the security slot for
the Kensington lock.
For details, see the manual of the security
tool.

Security slot

Security bar
Anti-theft chain or wire

WARNING ►Do not use the security bar and slot to prevent the projector
from falling down, since it is not designed for it.
CAUTION ►Do not place anti-theft chain or wire near the exhaust vent. It
may become too hot.
NOTE • The security bar and slot is not comprehensive theft prevention
measures. It is intended to be used as supplemental theft prevention measure.
14

Remote control

Remote control
Installing the batteries
Please insert the batteries into the remote control before using it. If the remote control
starts to malfunction, try to replace the batteries. If you will not use the remote control for
long period, remove the batteries from the remote control and store them in a safe place.
1
2
3
Holding the hook part of the battery
cover, remove it.

1.

AA batteries
2. Align and insert the twoHITACHI MAXELL
(HITACHI MAXELL or

3.

ENERGY, Part No. LR6 or R6P) according
to their plus and minus terminals as indicated in the remote control.
Replace the battery cover in the direction of the arrow and snap it back into place.

WARNING ►Always handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
which could result in fire, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specified. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
• Do not place a battery in a fire or water. Keep batteries in a dark, cool and dry place.
• If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
• Obey the local laws on disposing the battery.

About the remote control signal
The remote control works with the projector’s remote
sensor. This projector has a remote sensor on the front.
The sensor senses the signal within the following range
when the sensor is active:
60 degrees (30 degrees to the left and right of the
sensor) within 3 meters about.

30º 30º

Approx.
3m

NOTE • The remote control signal reflected in the screen or the like may be available.
If it is difficult to send the signal to the sensor directly, attempt to make the signal reflect.
• The remote control uses infrared light to send signals to the projector (Class 1
LED), so be sure to use the remote control in an area free from obstacles that
could block the remote control’s signal to the projector.
• The remote control may not work correctly if strong light (such as direct sun
light) or light from an extremely close range (such as from an inverter fluorescent
lamp) shines on the remote sensor of the projector. Adjust the position of
projector avoiding those lights.
15

Remote control

Changing the frequency of remote control signal
The accessory remote control has the two choices on signal
frequency, Mode 1:NORMAL and Mode 2:HIGH. If the remote
control does not function properly, attempt to change the
signal frequency.
In order to set the Mode, please keep pressing the
(2)
combination of the two buttons listed below simultaneously for
about 3 seconds.

VIDEO

ASPECT

MAGNIFY

MY SOURCE/
COMPUTER DOC.CAMERA

AUTO

FREEZE

SEARCH

BLANK

PAGE
UP

VOLUME

ON

DOWN

OFF

KEYSTONE

MY BUTTON
1

MUTE

2

MENU

POSITION

ENTER

(1) Set to Mode 1:NORMAL... the VOLUME - and the RESET buttons
(2) Set to Mode 2:HIGH... the MAGNIFY OFF and the ESC buttons
Please remember that the REMOTE FREQ. in the SERVICE
item of the OPTION menu ( 51) of the projector to be
controlled should be set to the same mode as the remote
control.

16

ESC

RESET

(1)

Power on/off

Power on/off
STANDBY/ON button
POWER indicator

Turning on the power

1. Make sure that the power cord is ﬁrmly and
correctly connected to the projector and the

STANDBY/ON

INPUT

MENU

LAMP
TEMP

outlet.
Make sure that the POWER indicator is
steady orange ( 73). Then remove the lens
cover.
Press the STANDBY/ON button on the
projector or the remote control.
The projection lamp will light up and the POWER
indicator will begin blinking in green. When the power
is completely on, the indicator will stop blinking and light in steady green
( 73).
To display the picture, select an input signal according to the section “Selecting an
input signal” ( 18).
POWER

2.

VIDEO

ASPECT

MAGNIFY

MY SOURCE/
COMPUTER DOC.CAMERA

AUTO

FREEZE

SEARCH

BLANK

PAGE
UP

VOLUME

ON

3.

DOWN

OFF

KEYSTONE

MY BUTTON
1

MUTE

2

MENU

POSITION

ENTER

ESC

RESET

Turning off the power
STANDBY/ON
or
1. Press the “Power off?” willbutton on the projector for the remote control. The
message
appear on the screen
about 5 seconds.
while the message appears.
2. Press the STANDBY/ON button again POWER indicator will begin blinking
The projector lamp will go off, and the

3.

in orange. Then the POWER indicator will stop blinking and light in steady
orange when the lamp cooling is complete ( 73).
Attach the lens cover, after the POWER indicator turns in steady orange.

Do not turn the projector on for about 10 minutes or more after turning it off.
Turning the projector on again too soon could shorten the lifetime of some
consumable parts of the projector.
WARNING ►A strong light is emitted when the projector’s power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projector’s openings.
►Do not touch around the lamp cover and the exhaust vent during use or just
after use, since it is too hot.
NOTE • Turn the power on/off in right order. Please power on the projector
prior to the connected devices.
• This projector has the function that can make the projector automatically turn on/
off. Please refer to the DIRECT POWER ON ( 47) and the AUTO POWER OFF
( 48) items of the OPTION menu.
• Use the shutdown switch ( 75) only when the projector is not turned off by
normal procedure.
17

Operating

Operating
Adjusting the volume

VOLUME +/- buttons

1. Use the VOLUME +/- buttons to adjust the volume. the
A dialog will appear on the screen to aid you in adjusting

VIDEO

ASPECT

MY SOURCE/
COMPUTER DOC.CAMERA

AUTO

SEARCH

BLANK

volume. If you do not do anything, the dialog will automatically
disappear after a few seconds.
● When is selected for current picture input port, the volume
adjustment is disabled. Please see the AUDIO SOURCE
item of the AUDIO menu ( 40).
● When the projector is in the standby state, the volume can be
adjusted if is not selected for the AUDIO OUT STANDBY and the NORMAL
is selected to the STANDBY MODE in the SETUP menu ( 39).
MAGNIFY

FREEZE

PAGE
UP

VOLUME

ON

DOWN

OFF

KEYSTONE

MY BUTTON
1

MUTE

2

MENU

POSITION

Temporarily muting the sound

MUTE button

Press the MUTE button on the remote control.
A dialog will appear on the screen indicating that you have
muted the sound.
To restore the sound, press the MUTE, VOLUME + or
VOLUME - button. Even if you do not do anything, the dialog
will automatically disappear after a few seconds.
● When is selected for current picture input port, the sound
is always muted. Please see the AUDIO SOURCE item of
the AUDIO menu ( 40).
● The C.C. (Closed Caption) is automatically activated when sound is muted
and an input signal containing C.C. is received. This function is available
only when the signal is NTSC for the VIDEO or S-VIDEO, or 480i@60 for the
COMPUTER IN1 or COMPUTER IN2, and when the AUTO is selected for the
DISPLAY in the C.C. menu under the SCREEN menu ( 46).

1.

VIDEO

ASPECT

MAGNIFY

MY SOURCE/
COMPUTER DOC.CAMERA

AUTO

FREEZE

SEARCH

BLANK

PAGE
UP

VOLUME

ON

DOWN

OFF

KEYSTONE

MY BUTTON
1

POSITION

MUTE

2

MENU

Selecting an input signal

1.

Press the INPUT button on the projector.
Each time you press the button, the projector switches its
input port from the current port as below.
COMPUTER IN1
COMPUTER IN2
VIDEO
S-VIDEO
HDMI

● While the ON is selected for the AUTO SEARCH item in
the OPTION menu ( 47), the projector will keep checking
the ports in above order repeatedly till an input signal is
detected.
(continued on next page)
18

INPUT button
NDBY/ON

INPUT

MEN

Operating

Selecting an input signal (continued)
the
the remote
1. Presstime COMPUTER button onthe projector control. its
Each
you press the button,
switches
COMPUTER IN1
COMPUTER IN2

COMPUTER button
VIDEO

HDMI

ASPECT

MAGNIFY

MY SOURCE/
COMPUTER DOC.CAMERA

AUTO

FREEZE

SEARCH

BLANK

PAGE
UP

VOLUME

ON

● While the ON is selected for the AUTO SEARCH item in
the OPTION menu, the projector will keep checking every
port sequentially till an input signal is detected ( 47). If the
COMPUTER button is pressed when the VIDEO or S-VIDEO
port is selected, the projector will check the COMPUTER IN1
port ﬁrst.
the
1. Presstime VIDEO button on the remote control.
Each
you press the button, the projector switches its

KEYSTONE

MUTE

2

MENU

VIDEO button
VIDEO

VIDEO

MY BUTTON
1

POSITION

S-VIDEO

DOWN

OFF

ASPECT

MAGNIFY

MY SOURCE/
COMPUTER DOC.CAMERA

AUTO

FREEZE

SEARCH

BLANK

PAGE
UP

VOLUME

ON

● While ON is selected for AUTO SEARCH item in OPTION
menu, the projector will keep checking every port sequentially
till an input signal is detected ( 47). If the VIDEO button is
pressed when the COMPUTER IN1 or the COMPUTER IN2
port is selected, the projector will check the S-VIDEO port
ﬁrst.
/ DOC. CAMERA
1. Press the MY SOURCE input signal will be button on
the remote control. The
changed
into the signal you set as the MY SOURCE (

DOWN

OFF

KEYSTONE

MY BUTTON
1

MUTE

2

MENU

POSITION

MY SOURCE /
DOC. CAMERA button

49).

● This function also can use for document camera. Select the
input port that connected the document camera.

VIDEO

ASPECT

MAGNIFY

MY SOURCE/
COMPUTER DOC.CAMERA

AUTO

FREEZE

SEARCH

BLANK

PAGE
UP

VOLUME

ON

OFF

KEYSTONE

POSITION

DOWN

MY BUTTON
1

MUTE

2

MENU

19

Operating

Searching an input signal

SEARCH button

1. Press the SEARCH button on the remote control.below in
The projector will start to check its input ports as

VIDEO

ASPECT

order to find any input signals.
When an input is found, the projector will stop searching
and display the image. If no signal is found, the projector will
return to the state selected before the operation.
COMPUTER IN1
COMPUTER IN2
VIDEO
S-VIDEO
HDMI

MAGNIFY

MY SOURCE/
COMPUTER DOC.CAMERA

AUTO

FREEZE

SEARCH

BLANK

PAGE
UP

VOLUME

ON

DOWN

OFF

KEYSTONE

MY BUTTON
1

MUTE

2

MENU

POSITION

● While the ON is selected for the AUTO SEARCH item in the OPTION menu
( 47), the projector will keep checking the ports in above order repeatedly till
an input signal is detected.

Selecting an aspect ratio

1.

Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the
mode for aspect ratio in turn.
For a computer signal
NORMAL 4:3
16:9

ASPECT button
VIDEO

ASPECT

MAGNIFY

AUTO

FREEZE

SEARCH

BLANK

PAGE
UP

VOLUME

ON

16:10

NATIVE

OFF

KEYSTONE

For an HDMITM signal
NORMAL 4:3
16:9

MY SOURCE/
COMPUTER DOC.CAMERA

DOWN

MY BUTTON
1

MUTE

2

POSITION

16:10

14:9

NATIVE

For a video signal, s-video signal or component video signal
NATIVE
4:3
16:9
16:10
14:9
For no signal
4:3 (fixed)
● The ASPECT button does not work when no proper signal is inputted.
● The NORMAL mode keeps the original aspect ratio setting.
● The on-screen menu might be displayed outside of the image display
area depending on the adjustment value of the ASPECT, D-ZOOM and
KEYSTONE. Changing the values of ASPECT, D-ZOOM and KEYSTONE
may fix the symptom.

20

MENU

Operating

Adjusting the projector's elevator
When the place to put the projector is slightly uneven to the left or right, use the
elevator feet to place the projector horizontally.
Using the feet can also tilt the projector in order to project
at a suitable angle to the screen, elevating the front side of 3°
the projector within 3 degrees.
This projector has 2 elevator feet and 2 elevator buttons. An elevator foot is
adjustable while pushing the elevator button on the same side as it.

1. Holding the projector, push the elevator buttons to loose the elevator feet.
2. Position the front side of the projector to the desired height.
3. Release the elevator buttons in order to lock the elevator feet.
4. After making sure that the elevator feet are locked, put the projector down
gently.
twisted
5. If necessary, the elevator feet can be manuallythe feet. to make more precise
adjustments. Hold the projector when twisting
1

5

To loose an elevator foot, push the
elevator button on the same side as it.
To ﬁnely adjust, twist the foot.

CAUTION ►Do not handle the elevator buttons without holding the
projector, since the projector may drop down.
►Do not tilt the projector other than elevating its front within 3 degrees using
the adjuster feet. A tilt of the projector exceeding the restriction could cause
malfunction or shortening the lifetime of consumables, or the projector itself.

Adjusting the focus
Use the focus ring to focus the picture.

Focus ring

21

Operating

Using the automatic adjustment feature
AUTO button on the remote control.
1. Press thethis button performs the following.
Pressing

AUTO button
VIDEO

MY SOURCE/
COMPUTER DOC.CAMERA

The vertical position, the horizontal position and the
horizontal phase will be automatically adjusted.
Make sure that the application window is set to its maximum
size prior to attempting to use this feature. A dark picture
may still be incorrectly adjusted. Use a bright picture when
adjusting.
For a video signal and s-video signal
The video format best suited for the respective input signal will be selected
automatically. This function is available only when the AUTO is selected for
the VIDEO FORMAT item in the INPUT menu ( 35). The vertical position
and horizontal position will be automatically set to the default.
For a component video signal
The vertical position and horizontal position will be automatically set to the
default. The horizontal phase will be automatically adjusted.
● The automatic adjustment operation requires approx. 10 seconds. Also
please note that it may not function correctly with some input.
● When this function is performed for a video signal, a certain extra such as a
line may appear outside a picture.
● When this function is performed for a computer signal, a black frame may be
displayed on the edge of the screen, depending on the PC model.
● The items adjusted by this function may vary when the FINE or DISABLE is
selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu
( 50).
ASPECT

MAGNIFY

AUTO

SEARCH

BLANK

PAGE
UP

VOLUME

FREEZE

ON

DOWN

OFF

KEYSTONE

MY BUTTON
1

MENU

POSITION

Adjusting the position
the POSITION
while
1. Press is on screen, tobutton on the remote control dialog no
menu
display the D-SHIFT ( 38)
on
screen.

KEYSTONE

MUTE

2

MY BUTTON
1

MUTE

2

MENU

POSITION

ENTER

ESC

RESET

▼, ◄ and ► buttons to adjust the picture position.
2. Use the ▲,POSITION button again to ﬁnish this operation.
Press the
POSITION button

● This is a function to shift the position of the shrunken picture by the D-ZOOM
( 38) function.
● When an OSD (On Screen Display) menu is displayed, this operation moves
the position of the OSD menu, but the picture position is not ( 26).
● The D-SHIFT adjustment values are not valid when the D-ZOOM is set to 256
(full screen).
22

Operating

Correcting the keystone distortions

1.
2.

Press the KEYSTONE button on the remote control.
A dialog will appear on the screen to aid you in correcting the
distortion.
Use the ◄/► cursor buttons for adjustment.
To close the dialog and complete this operation, press the
KEYSTONE button again. Even if you do not do anything, the
dialog will automatically disappear after a few seconds.

KEYSTONE button
AUTO

ASPECT

MAGNIFY

FREEZE

SEARCH

BLANK

PAGE
UP

VOLUME

ON

DOWN

OFF

KEYSTONE

MY BUTTON
1

MUTE

2

● The adjustable range of this function varies for each input signal. For some input,
this function may not work well.
● When the projector is inclined to near ±6 degrees or over, this function may not
work well.
● This function will be unavailable when the Transition Detector is activated ( 63).
● The OSD menu might be displayed outside of the image display area depending
on the adjustment value of the ASPECT, D-ZOOM and KEYSTONE. Changing
the values of ASPECT, D-ZOOM and KEYSTONE may fix the symptom.

Using the magnify feature

1.

MAGNIFY

ON/OFF buttons
Press the MAGNIFY ON button on the remote control. The
picture will be magnified, and the MAGNIFY dialog will appear on
the screen. When the MAGNIFY ON button is pressed for the first
time after the projector is turned on, the picture will be zoomed by
1.5 times. On the dialog, triangle marks to show each direction
will be displayed.
While the triangles are displayed on the dialog, use the ▲/▼/◄/►
cursor buttons to shift the magnifying area.
VIDEO

ASPECT

MAGNIFY

MY SOURCE/
COMPUTER DOC.CAMERA

AUTO

FREEZE

SEARCH

BLANK

PAGE
UP

VOLUME

ON

OFF

KEYSTONE

DOWN

MY BUTTON
1

MUTE

2.
will be displayed
when the
3. A magnifying glass iconthe dialog with theon the dialogdisplayed. MAGNIFY ON
button is pressed while
triangles is
glass icon is
4. While the magnifyingmagnification displayed on the dialog, use the ▲/▼ cursor
buttons to adjust the
ratio. The magnification ratio will be adjusted
5.

2

with fine steps. And changes in the ratio in single steps are subtle so they may be
hard to recognize.
Press the MAGNIFY OFF button on the remote control to exit magnification.

NOTE • The MAGNIFY dialog will automatically disappear in several seconds with
no operation. The dialog will appear again if the MAGNIFY ON button is pressed
when the dialog has automatically disappeared.
• While the MAGNIFY dialog is displayed, press the MAGNIFY ON button to switch
the dialog between magnifying area shifting (with the triangles) and magnification
ratio adjustment (with the magnifying glass icon).
• The magnification is automatically disabled when the displaying signal or its
display condition is changed.
• While the magnification is active, the keystone distortion condition may vary. It will
be restored when the magnification is disabled.
• Some horizontal stripes might be visible on the image while magnification is active.
23

Operating

Temporarily freezing the screen

1.

Press the FREEZE button on the remote control.
The “FREEZE” indication will appear on the screen (however,
the indication will not appear when the OFF is selected for
the MESSAGE item in the SCREEN menu ( 43)), and the
projector will go into the FREEZE mode, which the picture is
frozen.
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE button again.

FREEZE button
VIDEO

ASPECT

MAGNIFY

MY SOURCE/
COMPUTER DOC.CAMERA

AUTO

FREEZE

SEARCH

BLANK

PAGE
UP

VOLUME

ON

DOWN

OFF

KEYSTONE

MY BUTTON
1

MUTE

2

● The projector automatically exits from the FREEZE mode when some control
buttons are pressed.
● If the projector continues projecting a still image for a long time, the LCD
panel might possibly be burned in. Do not leave the projector in the FREEZE
mode for too long.
● Images might appear degraded when this function is operated, but it is not a
malfunction.

Temporarily blanking the screen

1.

Press the BLANK button on the remote control.
The BLANK screen will be displayed instead of the screen of
input signal. Please refer to the BLANK item in the SCREEN
menu ( 41).
To exit from the BLANK screen and return to the input signal
screen, press the BLANK button again.

BLANK button
VIDEO

ASPECT

MAGNIFY

MY SOURCE/
COMPUTER DOC.CAMERA

AUTO

FREEZE

SEARCH

BLANK

PAGE
UP

VOLUME

ON

OFF

KEYSTONE

DOWN

MY BUTTON
1

MUTE

2

● The projector automatically exits from the BLANK mode when
some control buttons are pressed.
CAUTION ►If you wish to have a blank screen while the projector's lamp is
on, use the BLANK function above. Any other method of blocking the projection
light, such as attaching something to the lens or placing something in front of
the lens, may cause the damage to the projector.
NOTE • The sound is not connected with the BLANK screen function. If
necessary, set the volume or mute ﬁrst. To display the BLANK screen and mute
the sound at one time, use the AV MUTE function ( 49).

24

Operating

Using the menu function
This projector has the following menus:
PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK,
SECURITY and EASY MENU.
The EASY MENU consists of functions often used, and the other menus are
classiﬁed into each purpose and brought together as the ADVANCED MENU.
Each of these menus is operated using the same methods. While the projector
is displaying any menu, the MENU button on the projector works as the cursor
buttons. The basic operations of these menus are as follows.
INPUT button
STANDBY/ON

INPUT

MENU

LAMP
TEMP

ENTER button
MENU button
Cursor buttons
MENU

POSITION

VIDEO

ASPECT

MAGNIFY

MY SOURCE/
COMPUTER DOC.CAMERA

AUTO

FREEZE

SEARCH

BLANK

PAGE
UP

VOLUME

ON

DOWN

OFF

POWER

ENTER

KEYSTONE

MY BUTTON
1

MUTE

2

MENU

POSITION

ENTER

ESC

MENU button
(Cursor buttons)

ESC button

RESET

ESC

RESET

RESET button

start the MENU,
1. To ADVANCED) will press the MENU button. The MENU you last used (EASY
or
appear. The EASY MENU has priority to appear just after
powered on.

2. In the EASY MENU buttons to select an item to
(1) Use the ▲/▼ cursor
operate. If you want to change it to the ADVANCED
MENU, select the ADVANCED MENU.
(2) Use the ◄/► cursor buttons to operate the item.
In the ADVANCED MENU
(1) Use the ▲/▼ cursor buttons to select a menu.
The items in the menu appear on the right side.
If you want to change it to the EASY MENU,
select the EASY MENU.
(2) Press the ► cursor (or the ENTER) button to
move the cursor to the right side. Then use the
▲/▼ cursor buttons to select an item to operate and press the ► cursor
(or the ENTER) button to progress. The operation menu or dialog of the
selected item will appear.
(3) Use the buttons as instructed in the OSD to operate the item.
25

Operating

Using the menu function (continued)
press
again
3. To close the MENU,(or the the MENU buttonEven if or select the EXIT and
press the ◄ cursor
ENTER) button.
you do not do anything,
the dialog will automatically disappear after about 30 seconds.
● If you want to move the menu position, use the cursor buttons after pressing the
POSITION button.
● Some functions cannot be performed when a certain input port is selected, or
when a certain input signal is displayed.
● When you want to reset the operation, press the RESET button on the remote
control during the operation. Note that some items (ex. LANGUAGE, VOLUME)
cannot be reset.
● In the ADVANCED MENU, when you want to return to the previous display,
press the ◄ cursor (or the ESC) button on the remote control.
Indication in OSD (On Screen Display)

The meanings of the general words on the OSD are as follows.
Indication

Meaning

EXIT

Selecting this word ﬁnishes the OSD menu. It's the same as
pressing the MENU button on the remote control.

RETURN

Selecting this word returns the menu to the previous menu.

CANCEL or NO
OK or YES

26

Selecting this word cancels the operation in the present
menu and returns to the previous menu.
Selecting this word executes the prepared function or shifts
the menu to the next menu.

EASY MENU

EASY MENU
From the EASY MENU, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons. Then
perform it according to the following table.
Item

Description

ASPECT

Using the ◄/► cursor buttons switches the mode for aspect ratio.
See the ASPECT item in the IMAGE menu ( 32).
• The on-screen menu might be displayed outside of the image
display area depending on the adjustment value of the ASPECT,
D-ZOOM and KEYSTONE. Changing the values of ASPECT,
D-ZOOM and KEYSTONE may ﬁx the symptom.

D-ZOOM

Using the ◄/► cursor buttons adjusts the magniﬁcation ratio.
Small
Large
See the D-ZOOM item in the SETUP menu ( 38).

KEYSTONE

Using the ◄/► cursor buttons corrects the vertical keystone distortion.
See the KEYSTONE item in the SETUP menu ( 38).
Using the ◄/► cursor buttons switches the picture mode.
The picture modes are combinations of the GAMMA and the COLOR
TEMP settings. Choose a suitable mode according to the projected source.
NORMAL
DAYTIME

PICTURE MODE

NORMAL
CINEMA
DYNAMIC
BOARD(BLACK)
BOARD(GREEN)
WHITEBOARD
DAYTIME

CINEMA

DYNAMIC

WHITEBOARD
GAMMA
1 DEFAULT
2 DEFAULT
3 DEFAULT
4 DEFAULT
4 DEFAULT
5 DEFAULT
6 DEFAULT

BOARD(BLACK)

BOARD(GREEN)
COLOR TEMP
2 MID
3 LOW
1 HIGH
4 Hi-BRIGHT-1
5 Hi-BRIGHT-2
2 MID
6 Hi-BRIGHT-3

• When the combination of the GAMMA and the COLOR TEMP
differs from pre-assigned modes above, the display on the menu
for the PICTURE MODE is “CUSTOM”. Please refer to the GAMMA
and the COLOR TEMP ( 29, 30) items in the PICTURE menu.
• Lines or other noise might appear on the screen when this function
is operated, but it is not a malfunction.

27

EASY MENU

Item
ECO MODE

Description
Using the ◄/► cursor buttons turns off/on the eco mode.
See the ECO MODE item in the SETUP menu ( 38).

MIRROR

Using the ◄/► cursor buttons switches the mode for mirror status.
See the MIRROR item in the SETUP menu ( 39).

RESET

Performing this item resets all of the EASY MENU items except the
FILTER TIME and the LANGUAGE.
A dialog is displayed for confirmation. Selecting the OK using the ►
cursor button performs resetting.

FILTER TIME

The usage time of the air filter is shown in the menu.
Performing this item resets the filter time which counts usage time
of the air filter.
A dialog is displayed for confirmation. Selecting the OK using the ►
cursor button performs resetting.
See the FILTER TIME item in the OPTION menu ( 48).

LANGUAGE

Using the ◄/► cursor buttons changes the display language.
See the LANGUAGE item in the SCREEN menu ( 41).

ADVANCED MENU

Press the ► cursor (or the ENTER) button to use the ADVANCED
MENU.

EXIT

Press the ◄ cursor (or the ENTER) button to finish the OSD menu.

28

PICTURE menu

PICTURE menu
From the PICTURE menu, items shown in the table
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor (or the ENTER) button to execute
the item. Then perform it according to the following
table.
Item
BRIGHTNESS
CONTRAST

Description
Using the ◄/► cursor buttons adjusts the brightness.
Dark
Light
Using the ◄/► cursor buttons adjusts the contrast.
Weak
Strong
Using the ▲/▼ cursor buttons switches the gamma mode.
1 DEFAULT

1 CUSTOM

2 DEFAULT

2 CUSTOM

6 CUSTOM
6 DEFAULT

3 DEFAULT
3 CUSTOM

5 CUSTOM

5 DEFAULT

4 CUSTOM

4 DEFAULT

To adjust CUSTOM

GAMMA

Selecting a mode whose name includes the CUSTOM and then
pressing the ► cursor (or the ENTER) button displays a dialog to
aid you in adjusting the mode.
This function is useful when you want to
change the brightness of particular tones.
Choose an item using the ◄/► cursor
buttons, and adjust the level using the ▲/▼ cursor buttons.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER (or the INPUT) button.
Each time you press the ENTER (or the INPUT)
button, the pattern changes as below.
No pattern Gray scale of 9 steps
Ramp Gray scale of 15 steps
The eight equalizing bars correspond to eight tone levels of the test
pattern (Gray scale of 9 steps) except the darkest in the left end.
If you want to adjust the 2nd tone from left end on the test pattern,
use the equalizing adjustment bar “1”. The darkest tone at the left
end of the test pattern cannot be controlled with any of equalizing
adjustment bar.
• Lines or other noise might appear on the
screen when this function is operated, but it
is not a malfunction.

29

PICTURE menu

Item

Description
Using the ▲/▼ cursor buttons switches the color temperature mode.
1 HIGH

1 CUSTOM

2 MID

2 CUSTOM

6 CUSTOM

3 LOW

6 Hi-BRIGHT-3

3 CUSTOM

5 CUSTOM

5 Hi-BRIGHT-2

4 CUSTOM

4 Hi-BRIGHT-1

To adjust CUSTOM

COLOR TEMP

Selecting a mode whose name
includes the CUSTOM and then
pressing the ► cursor (or the ENTER)
button displays a dialog to aid you in
adjusting the OFFSET and GAIN of the
selected mode.
The OFFSET adjustments change the color intensity on the whole
tones of the test pattern.
GAIN adjustments mainly affect color intensity on the brighter tones
of the test pattern.
Choose an item using the ◄/► cursor buttons, and adjust the level
using the ▲/▼ cursor buttons.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER (or the INPUT) button.
Each time you press the ENTER (or the INPUT) button, the pattern
changes as below.
No pattern Gray scale of 9 steps
Ramp

Gray scale of 15 steps

• Lines or other noise might appear on the screen
when this function is operated, but it is not a
malfunction.

COLOR

Using the ◄/► cursor buttons adjusts the strength of whole color.
Weak
Strong
• This item can be selected when input signals are video, s-video or
component video signals.
• When input signal is HDMITM, this item can also be selected if
either 1) or 2) applies.
1) HDMI FORMAT is set to VIDEO.
2) HDMI FORMAT is set to AUTO, and the projector recognizes that
it receives video signals.


30

PICTURE menu

Item

Description

TINT

Using the ◄/► cursor buttons adjusts the tint.
Reddish
Greenish

SHARPNESS

Using the ◄/► cursor buttons adjusts the sharpness.
Weak
Strong
• There may be some noise and/or the screen may ﬂicker for a
moment when an adjustment is made. This is not a malfunction.
This projector has 4 memories for adjustment data (for all the items
of the PICTURE menu).
Selecting a function using the ▲/▼ cursor buttons and pressing the
► cursor (or the ENTER) button performs each function.
SAVE-1
SAVE-2
SAVE-3
SAVE-4
LOAD-4 LOAD-3
LOAD-2
LOAD-1

MY MEMORY

SAVE-1, SAVE-2, SAVE-3, SAVE-4
Performing a SAVE function saves the current adjustment data into
the memory linked in the number included in the function’s name.
• Remember that the current data being stored of a memory will be
lost by saving new data into the memory.
LOAD-1, LOAD-2, LOAD-3, LOAD-4
Performing a LOAD function loads the data from the memory linked
in the number included in the function’s name, and adjusts the
picture automatically depending on the data.
• The LOAD functions whose linked memory has no data are
skipped.
• Remember that the current adjusted condition will be lost by
loading data. If you want to keep the current adjustment, please
save it before performing a LOAD function.
• There may be some noise and the screen may ﬂicker for a
moment when loading data. This is not malfunction.
• You can perform the LOAD function using the MY BUTTONs.
Please see the MY BUTTON item in the OPTION menu ( 49).

31

IMAGE menu

IMAGE menu
From the IMAGE menu, items shown in the table
table.
Item

Description
Using the ▲/▼ cursor buttons switches the mode for aspect ratio.
NATIVE
NORMAL
4:3
16:9
16:10
For an HDMITM signal
NORMAL
4:3
16:9

ASPECT

16:10

14:9

NATIVE

For a video signal, s-video signal or component video signal
NATIVE
4:3
16:9
16:10
14:9
For no signal
4:3 (fixed)
• The NORMAL mode keeps the original aspect ratio of the signal.
• The on-screen menu might be displayed outside of the image display
area depending on the adjustment value of the ASPECT, D-ZOOM
and KEYSTONE. Changing the values of ASPECT, D-ZOOM and
KEYSTONE may fix the symptom.
Using the ◄/► cursor buttons adjusts the over-scan ratio.
Small (It magnifies picture)
Large (It reduces picture)

OVER SCAN

• When this adjustment is too large, certain degradation may appear at
the frame area of the picture. In such a case, please adjust small.

V POSITION

Using the ◄/► cursor buttons adjusts the vertical position.
Down
Up
• Over-adjusting the vertical position may cause noise to appear on the
screen. If this occurs, please reset the vertical position to the default
setting. Pressing the RESET button on the remote control when the V
POSITION is selected will reset the V POSITION to the default setting.
• When this function is performed on a video signal or s-video signal,
the range of this adjustment depends on the OVER SCAN ( above)
setting. It is not possible to adjust when the OVER SCAN is set to 10.
• This item cannot be selected for an HDMITM signal.

32

IMAGE menu

Item

Description

H POSITION

Using the ◄/► cursor buttons adjusts the horizontal position.
Right
Left
• Over-adjusting the horizontal position may cause noise to appear on
the screen. If this occurs, please reset the horizontal position to the
default setting. Pressing the RESET button on the remote control when
the H POSITION is selected will reset the H POSITION to the default
setting.
• When this function is performed on a video signal or s-video signal,
the range of this adjustment depends on the OVER SCAN ( 32)
setting. It is not possible to adjust when the OVER SCAN is set to 10.

H PHASE

Using the ◄/► cursor buttons adjusts the horizontal phase to eliminate
ﬂicker.
Right
Left
• This item can be selected only for a computer signal or a component
video signal.

H SIZE

Using the ◄/► cursor buttons adjusts the horizontal size.
Small
Large
• This item can be selected only for a computer signal.
• When this adjustment is excessive, the picture may not be displayed
correctly. In such a case, please reset the adjustment by pressing the
RESET button on the remote control during this operation.
• Images might appear degraded when this function is operated, but it is
not a malfunction.

AUTO ADJUST
EXECUTE

Selecting this item performs the automatic adjustment feature.
The vertical position, the horizontal position and the horizontal phase
will be automatically adjusted.
Make sure that the application window is set to its maximum size prior
to attempting to use this feature. A dark picture may still be incorrectly
adjusted. Use a bright picture when adjusting.
For a video signal and s-video signal
The video format best suited for the respective input signal will be
selected automatically. This function is available only when the AUTO is
selected for the VIDEO FORMAT item in the INPUT menu ( 35). The
vertical position and horizontal position will be automatically set to the
default.
For a component video signal
The vertical position and horizontal position will be automatically set to
the default. The horizontal phase will be automatically adjusted.
• The automatic adjustment operation requires approx. 10 seconds.
Also please note that it may not function correctly with some input.
• When this function is performed for a video signal, a certain extra such
as a line may appear outside a picture.
• When this function is performed for a computer signal, a black frame
may be displayed on the edge of the screen, depending on the PC
model.
• The items adjusted by this function may vary when the FINE or the
DISABLE is selected for the AUTO ADJUST item of the SERVICE item
in the OPTION menu ( 50).

33

INPUT menu

INPUT menu
From the INPUT menu, items shown in the table
table.
Item

Description
Using the ▲/▼ cursor buttons switches the progress mode.
TV
FILM
OFF

PROGRESSIVE

• This function works only for a video signal, s-video signal,
component video signal or HDMITM signal of 480i@60 or 576i@50.
• When the TV or the FILM is selected, the screen image will be
sharp. The FILM adapts to the 2-3 Pull-Down conversion system.
But these may cause a certain defect (for example, jagged line) of
the picture for a quick moving object. In such a case, please select
the OFF, even though the screen image may lose sharpness.
Using the ▲/▼ cursor buttons switches the noise reduction mode.
HIGH
MID
LOW

VIDEO NR

• This function works only for a video signal, s-video signal,
component video signal or HDMITM signal of 480i@60 or 576i@50.
• When this function is excessive, it may cause a certain
degradation of the picture.
Using the ▲/▼ cursor buttons switches the mode for color space.
AUTO
RGB
SMPTE240
REC709
REC601

COLOR SPACE

• This item can be selected only for a computer signal or a
component video signal.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except the AUTO.


34

INPUT menu

Item

Description

VIDEO FORMAT

The video format for the S-VIDEO port and the VIDEO port can be set.
(1) Use the ▲/▼ cursor buttons
to select the input port.
S-VIDEO
VIDEO
(2) Using the ◄/► cursor
buttons switches the mode
for video format.
AUTO
NTSC
PAL
SECAM
N-PAL
M-PAL
NTSC4.43
• This item is performed only for a video signal from the VIDEO port
or the S-VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the
picture becomes unstable (e.g. an irregular picture, lack of color),
please select the mode according to the input signal.
Set the video format for the HDMI port.
Using the ▲/▼ cursor buttons switches the digital signal format.
AUTO
VIDEO
COMPUTER

HDMI FORMAT

AUTO
VIDEO
COMPUTER

Feature
Selecting the optimum mode automatically.
Suitable for DVD signals.
Suitable for computer signals.

• If the COMPUTER is selected, COLOR, TINT, OVERSCAN can
not be selected.
Set the digital range for HDMI port.
Using the ▲/▼ cursor buttons changes the digital signal mode.
AUTO
NORMAL
ENHANCED

HDMI RANGE

AUTO
NORMAL
ENHANCED

Feature
Selecting the optimum mode automatically.
Suitable for DVD signals (16-235)
Suitable for computer signals (0-255)

• If the contrast of the screen image is too strong or too weak, try
ﬁnding a more suitable mode.

35

INPUT menu

Item

Description

COMPUTER IN

The computer input signal type for the COMPUTER IN1 and IN2
ports can be set.
(1) Use the ▲/▼ cursor buttons to select the COMPUTER IN port to be set.
COMPUTER IN1
COMPUTER IN2
(2) Use the ◄/► cursor buttons to select
the computer input signal type.
AUTO
SYNC ON G OFF
• Selecting the AUTO mode allows
you to input a sync on G signal or component video from the port.
• In the AUTO mode, the picture may be distorted with certain
input signals. In such a case, remove the signal connector so that
no signal is received and select the SYNC ON G OFF, and then
reconnect the signal.
• The COMPUTER IN1/2 port can support a component signal also
( 10).
Set the frame lock function on/off for each port.
(1) Use the ▲/▼ cursor buttons to select the input ports.

FRAME LOCK

(2) Use the ◄/► cursor buttons to
turn the frame lock function on/off.
ON
OFF
• This item can be performed only on a signal with a vertical
frequency of 50 to 60 Hz.
• When the ON is selected, moving pictures are displayed more
smoothly.
• This function may cause a certain degradation of the picture. In
such a case, please select the OFF.


36

INPUT menu

Item

Description
The resolution for the COMPUTER IN1 and the COMPUTER IN2
input signals can be set on this projector.
In the RESOLUTION menu select the resolution you wish to display
■AUTO
Selecting AUTO will set a resolution
appropriate to the input signal.
■STANDARD
Pressing the ► cursor (or the ENTER) button
when selecting a STANDARD resolution
will automatically adjust the horizontal and
vertical positions, clock phase and horizontal
size.
The INPUT_INFORMATION dialog will be
displayed.

RESOLUTION

STANDARD
↓

■CUSTOM
(1) To set a custom resolution use the ▲/▼ cursor buttons to select
the CUSTOM and the RESOLUTION_CUSTOM box will be
displayed.
CUSTOM
Set the horizontal (HORZ) and
↓
vertical (VERT) resolutions using
the ▲/▼/◄/► cursor buttons.
This function is may not support all
resolutions.
(2) Move the cursor to the OK on screen and press the ► cursor (or
the ENTER) button. The message "ARE YOU SURE YOU WISH
TO CHANGE RESOLUTION?" appears. To save the setting,
press the ► cursor button.
The horizontal and vertical positions, clock phase and horizontal
size will be automatically adjusted.
To revert back to the previous resolution
without saving changes, move the cursor
to the CANCEL on screen and press the
◄ cursor (or the ENTER) button.
The screen will then return to the
RESOLUTION menu displaying the
previous resolution.
• For some pictures, this function may
not work well.

37

SETUP menu

SETUP menu
From the SETUP menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons, and press
the ► cursor (or the ENTER) buttonn to execute the item.
Then perform it according to the following table.
Item

D-ZOOM

Description

Using the ◄/► cursor buttons adjusts the magniﬁcation ratio.
Small
Large

D-SHIFT V

Using the ◄/► cursor buttons adjusts the vertical picture position.
Down
Up
• The D-SHIFT adjustment values are not valid when the D-ZOOM is
set to 256 (full screen).

D-SHIFT H

Using the ◄/► cursor buttons adjusts the horizontal picture position.
Left
Right
• The D-SHIFT adjustment values are not valid when the D-ZOOM is
set to 256 (full screen).

PICTURE POSITION

Using the ▲/▼ cursor buttons selects the vertical picture position.
TOP
MID
BOTTOM
The PICTURE POSITION is not changed if any of the following cases apply.
• The ASPECT is set to 4:3.
• The input signal has an aspect ratio of 4:3 or vertically larger than 4:3,
while the ASPECT is set to NORMAL.
• Vertical size of the displayed image is full on the effective display area,
while the ASPECT is set to NATIVE.
• One of the following messages is displayed on the screen:
"NO INPUT IS DETECTED"
"SYNC IS OUT OF RANGE"
"INVALID SCAN FREQ."
• The BLANK or TEMPLATE function is selected.

KEYSTONE

Using the ◄/► cursor buttons corrects the vertical keystone distortion.
Shrink the bottom of the image
Shrink the top of the image
• The adjustable range of this function will vary among inputs. For some
input, this function may not work well.
• This function will be unavailable when the Transition Detector is on ( 63).

ECO MODE

Using the ▲/▼ cursor buttons turns off/on the eco mode.
NORMAL
ECO
• When the ECO is selected, acoustic noise and screen brightness are reduced.

38

SETUP menu

Item

Description
Using the ▲/▼ cursor buttons switches the mode for mirror status.

MIRROR

NORMAL

H:INVERT

V:INVERT

H&V:INVERT

If the Transition Detector is on and the MIRROR status is changed,
the TRANSITION DETECTOR ON alarm ( 63) will be displayed
when projector is restarted after the AC power is turned off.

STANDBY MODE

MONITOR OUT

Using ▲/▼ cursor buttons switches the standby mode setting
between the NORMAL and the SAVING.
NORMAL
SAVING
• When the SAVING is selected and the projector is in the standby
state, the power consumption is lowered with some functional
restriction as below.
- The RS-232C communication control is disabled except turning
the projector on and changing the STANDBY MODE setting.
- The STANDBY of the MONITOR OUT ( below) is invalid, and no
signal is output from the MONITOR OUT port.
- The AUDIO OUT STANDBY of the AUDIO SOURCE ( 40) is
invalid, and no signal is output from the AUDIO OUT ports ( 18).
• If the COMMUNICATION TYPE in the COMMUNICATION menu
is set to NETWORK BRIDGE, all of the RS-232C commands are
disabled ( 52).
The combination of a picture shown on screen and output from the
MONITOR OUT port can be arranged in the menu.
The picture coming into the port selected in the (2) is output to the
MONITOR OUT port while an image from the port chosen in the (1)
is on screen.
(1) Choose a picture input port using
▲/▼ cursor buttons.
• Select STANDBY to specify the
output from the MONITOR OUT port
in the standby state. This selection is
available only when NORMAL is selected for the STANDBY MODE
( above).
(2) Select one of the COMPUTER IN ports using the ◄/► cursor
buttons.
Choosing the COMPUTER IN1 allows the following choice.
COMPUTER IN1
OFF
Choosing the COMPUTER IN2 allows the following choice.
COMPUTER IN2
OFF
Choosing other input or the STANDBY allows the following choice.
COMPUTER IN1
COMPUTER IN2
OFF
• The OFF disables the MONITOR OUT port.
39

AUDIO menu

AUDIO menu
From the AUDIO menu, items shown in the table
below can be performed. Select an item using the
▲/▼ cursor buttons, and press the ► cursor (or the
ENTER) button to execute the item. Then perform it
according to the following table.

Item
VOLUME

Description
Using the ◄/► cursor buttons adjusts the volume.
Low

High

Using the ▲/▼ cursor buttons turns on/off the built-in speaker.
SPEAKER

AUDIO SOURCE

ON
OFF
When the OFF is selected, the built-in speaker does not work.
The combination of a picture and audio input port can be arranged
in the menu.
The audio coming into the port selected in the (2) is output while an
image from the port chosen in the (1) is on screen.
(1) Choose a picture input port using the ▲/▼ cursor buttons.
• Choose the AUDIO OUT STANDBY,
to select the audio output to the AUDIO
OUT ports in the standby state. The
built-in speaker does not work in the
standby state.
• While the RETURN is selected,
pressing the ◄ cursor (or the ENTER) button returns to the
previous menu.
(2) Select one of the AUDIO IN ports using the ◄/► cursor buttons.
AUDIO IN1
AUDIO IN2
AUDIO IN3
H
• "H" is abbreviation of HDMITM.
• H can be selected for HDMI port only. When H is selected, the
audio signal to HDMI port will be output if HDMI is chosen as a
picture source.
• disables the audio output.
• The C.C. (Closed Caption) is automatically activated when is
selected and an input signal containing C.C. is received. This function
is available only when the signal is NTSC for the VIDEO or the
S-VIDEO, or 480i@60 for the COMPUTER IN1 or the COMPUTER
IN2, and when the AUTO is selected for the DISPLAY in the C.C.
menu under the SCREEN menu ( 46).

HDMI AUDIO

40

The HDMI AUDIO is set to 1 as default.
In case the HDMITM audio does not work well, try 2.
1
2

SCREEN menu

SCREEN menu
From the SCREEN menu, items shown in the table
table.
Item

Description

LANGUAGE

Using the ▲/▼/◄/► cursor buttons switches the OSD (On Screen
Display) language.
ENGLISH, FRANÇAIS, DEUTSCH, ESPAÑOL...
(shown in the LANGUAGE dialog)

Press the ENTER (or the INPUT) button to save the language setting.
MENU POSITION

Using the ▲/▼/◄/► cursor buttons adjusts the menu position.
To quit the operation, press the MENU button on the remote control
or keep no operation for about 10 seconds.
Using the ▲/▼ cursor buttons switches the mode for the blank screen.
The blank screen is a screen for the temporarily blanking feature
( 24). It is displayed by pressing the BLANK button on the remote
control.
MyScreen
ORIGINAL
BLUE
WHITE
BLACK

BLANK

MyScreen : Screen can be registered by the MyScreen item ( 42).
ORIGINAL : Screen preset as the standard screen.
BLUE, WHITE, BLACK : Plain screens in each color.
• To avoid remaining as an afterimage, the MyScreen or the
ORIGINAL screen will change to the plain black screen after several
minutes.
Using the ▲/▼ cursor buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen
ORIGINAL
OFF

START UP

MyScreen : The screen can be registered by the MyScreen item ( 42).
ORIGINAL : The screen preset as the standard screen.
OFF : Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or the
ORIGINAL screen will change to the BLANK screen ( 24) after
several minutes. If also the BLANK screen is the MyScreen or the
ORIGINAL, the plain black screen is instead used.
• When the ON is selected to the MyScreen PASSWORD item in the
SECURITY menu ( 61), the START UP is fixed to the MyScreen.

41

SCREEN menu

Item

Description

MyScreen

This item allows you to capture an image for use as a MyScreen
image which can be used as the BLANK screen and the START UP
screen. Display the image you want to capture before executing the
following procedure.
1. Selecting this item displays a dialog
titled “MyScreen”. It will ask you if
you start capturing an image from
the current screen.
Please wait for the target image to be displayed, and press the
ENTER (or the INPUT) button when the image is displayed. The
image will freeze and the frame for capturing will appear.
To stop performing, press the RESET (or press the ◄ cursor and
the INPUT buttons at the same time) button.
2. Using the ▲/▼/◄/► cursor buttons
adjusts the frame position.
Please move the frame to the position
of the image which you want to use. The
frame may not be able to be moved for
some input signals.
To start registration, press the ENTER
(or the INPUT) button on the remote
control.
To restore the screen and return to the previous dialog, press
the RESET (or press the ◄ cursor and the INPUT buttons at the
same time) button.
Registration takes several minutes.
When the registration is completed, the registered screen and the
following message is displayed for several seconds:
“MyScreen registration is ﬁnished.”
If the registration failed, the following message is displayed:
“A capturing error has occurred. Please try again.”
• This function cannot be selected when the ON is selected to the
MyScreen Lock item ( 43).
MyScreen PASSWORD item in the SECURITY menu ( 61).


42

SCREEN menu

Item

Description

MyScreen Lock

Using the ▲/▼ cursor buttons turns on/off the MyScreen lock
function.
ON
OFF
When the ON is selected, the item MyScreen is locked. Use this
function for protecting the current MyScreen.
MyScreen PASSWORD item in the SECURITY menu ( 61).

MESSAGE

Using the ▲/▼ cursor buttons turns on/off the message function.
ON
OFF
When the ON is selected, the following message function works.
“AUTO IN PROGRESS” while automatically adjusting
“NO INPUT IS DETECTED”
“SYNC IS OUT OF RANGE”
“INVALID SCAN FREQ.”
“NOT AVAILABLE”
“Searching….” while searching for the input
“Detecting….” while an input signal is detected
The indication of the input signal displayed by changing
The indication of the aspect ratio displayed by changing
The indication of the PICTURE MODE displayed by changing
The indication of the MY MEMORY displayed by changing
The indication of “FREEZE” and “II” while freezing the screen by
pressing the FREEZE button.
The indication of the TEMPLATE displayed by changing.
• When the OFF is selected, please remember if the picture is
frozen. Do not mistake freezing for a malfunction ( 24).


43

SCREEN menu

Item

Description

SOURCE NAME

Each input port for this projector can have a name applied to it.
(1) Use the ▲/▼ cursor buttons on the SCREEN menu to select the
SOURCE NAME and press the ► cursor (or the ENTER) button.
The SOURCE NAME menu will be displayed.
(2) Use the ▲/▼ cursor buttons on the
SOURCE NAME menu to select the port
to be named and press the ► cursor
button. Right side of the menu is blank
until a name is specified.
The SOURCE NAME dialog will be
displayed.
(3) The current name will be displayed on
the first line. Use the ▲/▼/◄/► cursor
buttons and the ENTER (or the INPUT)
button to select and enter characters.
To erase 1 character at one time, press
the RESET (or press the ◄ cursor and
the INPUT buttons at the same time)
button. Also if you move the cursor to the
DELETE or the ALL CLEAR on screen
and press the ENTER (or the INPUT)
button, 1 character or all characters
will be erased. The name can be a
maximum of 16 characters.
(4) To change an already inserted character, press the ▲ cursor
button to move the cursor to the first line, and use the ◄/►
cursor buttons to move the cursor on the character to be
changed.
After pressing the ENTER (or the INPUT) button, the character
is selected. Then, follow the same procedure as described at
the item (3) above.
(5) To finish entering text, move the cursor to the OK on screen
and press the ► cursor (or the ENTER / the INPUT) button. To
revert to the previous name without saving changes, move the
cursor to the CANCEL on screen and press the ◄ cursor (or the
ENTER / the INPUT) button.


44

SCREEN menu

Item

Description
Using the ▲/▼ cursor buttons switches the mode for the template
screen.
Press the ► cursor (or the ENTER) button to display the selected
template, and press the ◄ cursor button to close the displayed
screen.
The last selected template is displayed when the MY BUTTON
allocated to the TEMPLATE function is pressed ( 49).
TEST PATTERN
DOT-LINE1
DOT-LINE2
DOT-LINE3

TEMPLATE

MAP2
MAP1
CIRCLE2
CIRCLE1
DOT-LINE4
You can turn a map upside down and scroll it horizontally when MAP1
or MAP2 is selected. To invert or scroll the map, display the guidance
by pressing the RESET button on the remote three seconds or more
when MAP1 or MAP2 appears.
While the guidance is displayed:
• Press the ▲ cursor button and then press the ENTER or INPUT
button to place the Northern Hemisphere on the top.
• Press the ▼ cursor button and then press the ENTER or INPUT
button to place the Southern Hemisphere on the top.
• Press the ◄/► cursor button and then press the ENTER or
INPUT button to scroll the map horizontally.


45

SCREEN menu

Item

Description
The C.C. is the function that displays a
transcript or dialog of the audio portion of
a video, ﬁles or other presentation or other
relevant sounds. It is required to have NTSC
format video or 480i@60 format component
video source supporting C.C. feature to
utilize this function.
It may not work properly, depending on equipment or signal source.
In this case, please turn off the Closed Caption.
DISPLAY
Select the Closed Caption DISPLAY setting from following options
AUTO
ON
OFF

C.C.
(Closed Caption)

AUTO : Closed Caption automatically displays when the volume
is muted.
ON : The Closed Caption is on.
OFF : The Closed Caption is off.
• The caption is not displayed when the OSD menu is active.
• The Closed Caption is the function to display the dialogue,
narration, and / or sound effects of a television program or other
video sources. The Closed Caption availability is depending upon
broadcaster and/or content.
MODE
Select the Closed Caption MODE setting from following options
CAPTIONS
TEXT
CAPTIONS : Display Closed Caption.
TEXT : Display Text data, which is for additional information such
as news reports or a TV program guide. The information
covers the entire screen. Not all of the C.C. program has
Text information.
CHANNEL
Select the Closed Caption CHANNEL from following options using
the ▲/▼ cursor buttons.
1
2
3
4
1: Channel 1, primary channel / language
2: Channel 2
3: Channel 3
4: Channel 4
The channel data may vary, depending on the content. Some
channel might be used for secondary language or empty.

46

OPTION menu

OPTION menu
From the OPTION menu, items shown in the table
Select an item using the ▲/▼ cursor buttons,
and press the ► cursor (or the ENTER) button to
execute the item, except for the items LAMP TIME
and FILTER TIME. Then perform it according to the
following table.
Item

Description

AUTO SEARCH

Using the ▲/▼ cursor buttons turns on/off the automatic signal
search function.
ON
OFF
When the ON is selected, detecting no signal automatically cycles
through input ports in the following order. The search is started from
the current port. Then when an input is found, the projector will stop
searching and display the image.
COMPUTER IN1 COMPUTER IN2 HDMI
VIDEO
S-VIDEO

DIRECT
POWER ON

Using the ▲/▼ cursor buttons turns on/off the DIRECT POWER
ON function.
ON
OFF
When set to the ON, the lamp in projector will be automatically
turned on without the usual procedure ( 17), only when the
projector is supplied with the power after the power was cut while
the lamp was on.
• This function does not work as long as the power has been
supplied to the projector while the lamp is off.
• After turning the lamp on by the DIRECT POWER ON function,
if neither input nor operation is detected for about 30 minutes, the
projector is turned off, even though the AUTO POWER OFF function
( 48) is disabled.


47

OPTION menu

Item

Description
Using the ▲/▼ cursor buttons adjusts the time to count down to
automatically turn the projector off.
Long (max. 99 minutes)
Short (min. 0 minute = DISABLE)

AUTO
POWER OFF

When the time is set to 0, the projector is not turned off automatically.
When the time is set to 1 to 99, and when the passed time with nosignal or an unsuitable signal reaches at the set time, the projector
lamp will be turned off.
If one of the projector's buttons or the remote control buttons
is pressed or one of the commands (except get commands) is
transmitted to the CONTROL port during the corresponding time,
projector will not be turned off.
Please refer to the section the “Turning off the power” ( 17).

LAMP TIME

The lamp time is the usage time of the lamp, counted after the last
resetting. It is shown in the OPTION menu.
Pressing the ► cursor (or the ENTER / the RESET) button displays
a dialog.
To reset the lamp time, select the OK using the ► cursor button.
CANCEL OK
• Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
• For the lamp replacement, see the section the “Replacing the
lamp” ( 66, 67).

FILTER TIME

The filter time is the usage time of the air filter, counted after the last
resetting. It is shown in the OPTION menu.
Pressing the ► cursor (or the ENTER / the RESET) button displays
a dialog.
To reset the filter time, select the OK using the ► cursor button.
CANCEL OK
• Please reset the filter time only when you have cleaned or replaced
the air filter, for a suitable indication about the air filter.
• For the air filter cleaning, see the section the “Cleaning and
replacing the air filter” ( 68).


48

OPTION menu

Item

Description

MY BUTTON

This item is to assign one of the following functions to the MY
BUTTON 1/2 on the remote control ( 7).
(1) Use the ▲/▼ cursor buttons on the MY BUTTON menu to select
a MY BUTTON - (1/2) and press the ► cursor (or the ENTER)
button to display the MY BUTTON setup dialog.
(2) Then using the ▲/▼/◄/► cursor buttons sets one of the
following functions to the chosen button. Press the ENTER (or
the INPUT) button to save the setting.
• COMPUTER IN1: Sets port to the COMPUTER IN1.
• COMPUTER IN2: Sets port to the COMPUTER IN2.
• HDMI: Sets port to HDMI.
• S-VIDEO: Sets port to the S-VIDEO.
• VIDEO: Sets port to the VIDEO.
• MY IMAGE: Displays the MY IMAGE menu ( 58).
• MESSENGER: Turns the messenger text displayed on the screen on/
off ( Messenger Function of the User's Manual - Network Guide).
When there is no transferred text data to display, the message
”NO MESSENGER DATA" appears.
• INFORMATION: Displays the SYSTEM_INFORMATION, INPUT_
INFORMATION ( 54), NETWORK_INFORMATION( 59) or nothing.
• MY MEMORY: Loads one of adjustment data stored ( 31).
When more than one data are saved, the adjustment
changes every time the MY BUTTON is pressed.
When no data is saved in memory, the
dialog "No saved data" appears.
When the current adjustment is not
saved to memory, the dialog as shown in
the right appears.
If you want to keep the current adjustment, please press
the ► cursor button to exit. Otherwise loading a data will overwrite
the current adjusted condition.
• PICTURE MODE: Changes the PICTURE MODE ( 27).
• FILTER RESET: Displays the filter time reset confirmation dialogue
( 48).
• TEMPLATE: Makes the template pattern selected to the
TEMPLATE item ( 45) appear or disappear.
• AV MUTE: Turns the picture and audio on/off.
• D-ZOOM: Turns the D-ZOOM mode on/off. When the D-ZOOM
mode is on, use the ▲/▼ cursor buttons to adjust the
magnification ratio.
• D-SHIFT: Turns the D-SHIFT mode on/off. When the D-SHIFT
mode is on, use the ▲/▼/◄/► cursor buttons to move the
magnifying area.
• RESOLUTION: Turns the RESOLUTION menu on/off ( 37).

MY SOURCE

Using the ▲/▼ cursor buttons selects the picture input port to be
selected with pressing the MY SOURCE/DOC.CAMERA button on
the remote control.
Select the picture input that is connected with a document camera.
COMPUTER IN1
COMPUTER IN2
VIDEO
S-VIDEO
HDMI


49

OPTION menu

Item

Description
Selecting this item displays the SERVICE
menu.
Select an item using the ▲/▼ cursor
buttons, and press the ► cursor (or the
ENTER) button on the remote control
to execute the item.
FAN SPEED
Using the ▲/▼ cursor buttons switches the rotation speed of the
cooling fans. The HIGH is the mode for use at highlands etc. Note
that the projector is noisier when the HIGH is selected.
HIGH
NORMAL
AUTO ADJUST
Using the ▲/▼ cursor buttons to select one of the mode. When the
DISABLE is selected, the automatic adjustment feature is disabled.
FINE
FAST
DISABLE

SERVICE

FINE: Finer tuning including the H.SIZE adjustment.
FAST: Faster tuning, setting the H.SIZE to prearranged data for
the input signal.
• Depending on conditions, such as input image, signal cable to
the projector, environment around the projector, etc., the automatic
adjustment may not work correctly. In such a case, please choose
the DISABLE to disable the automatic adjustment, and make
adjustment manually.
GHOST
1. Select a color element of ghost using
the ◄/► cursor buttons.
2. Adjust the selected element using the
▲/▼ cursor buttons to disappear ghost.
FILTER MESSAGE
Use the ▲/▼ cursor button to set the timer for notifying by the
message when to replace the filter unit
500h
1000h
2000h
3000h
4000h
5000h
OFF
After choosing an item except the OFF, the message the
“REMINDER ***HRS PASSED .....” will appear after the timer
reaches the interval time set by this feature ( 72).
When the OFF is chosen, the message will not appear. Utilize
this feature to keep the air filter clean, setting the suitable time
according to your environment of this projector.
• Please take care of the filter unit periodically, even if there is
no message. If the air filter becomes to be blocked by dust or
other matter, the internal temperature will rise, which could cause
malfunction, or reduce the lifetime of the projector.
• Please be careful with the operating environment of the projector
and the condition of the filter unit.

50

OPTION menu

Item

Description
KEY LOCK
Using the ▲/▼ buttons turns on/off the key lock feature. When ON
is selected, the buttons on the projector except the STANDBY/ON
button are locked.
ON
OFF
• Please use this function to prevent tampering or accidental
operation. This function does not have any effect on the remote
control.

SERVICE
(continued)

REMOTE FREQ.
(1) Use the ▲/▼ button to change the projector's remote sensor
frequency setting ( 5).
1:NORMAL
2:HIGH
(2) Use the ◄/► button to change the
projector's remote sensor on or off.
ON
OFF
The factory default setting is for both 1:NORMAL and 2:HIGH to be
on. If the remote control does not function correctly, disable either of
them ( 16).
It's not possible to disable both options at the same time.
Selecting this item displays COMMUNICATION
menu.
In this menu, you can conﬁgure the serial
communication settings of the projector using the
CONTROL port.

COMMUNICATION • Select an item using the cursor buttons ▲/▼.
Then pressing the ► button opens the submenu
for the setting item you selected. Or, pressing
the ◄ button instead of the ► button makes the
menu back to the previous one without changing
the setup. Each submenu can be operated as
described above.
• When COMMUNICATION TYPE ( 52) is set to
OFF, the other items in COMMUNICATION menu
are invalid.
• For the function of serial communication, refer to
the User's Manual - Network Guide.

51

OPTION menu

Item

Description
COMMUNICATION TYPE
Select the communication type for transmission via
the CONTROL port.
NETWORK BRIDGE OFF
NETWORK BRIDGE: Select this type, if it is
required to control an external device as a network
terminal, via this projector from the computer.
The CONTROL port doesn't accept RS-232C
commands.( Controlling the external device
via the projector (using the NETWORK BRIDGE
function) of the User’s Manual - Network Guide)
OFF: Select this mode to receive RS-232C
commands using the CONTROL port.
• OFF is selected as the default setting.
• When you select the NETWORK BRIDGE, check
the item, TRANSMISSTION METHOD ( below).

SERVICE
(continued)

COMMUNICATION
(continued)

SERIAL SETTINGS
Select the serial communication condition for the
CONTROL port.
BAUD RATE
4800bps
9600bps
19200bps
38400bps
PARITY
NONE

ODD

EVEN

• The BAUD RATE is ﬁxed to 19200bps and PARITY
is ﬁxed NONE when the COMMUNICATION TYPE
is set to OFF ( above).
TRANSMISSION METHOD
Select the transmission method for communication by
the NETWORK BRIDGE from the CONTROL port.
HALF-DUPLEX
FULL-DUPLEX
HALF-DUPLEX: This method lets the projector
make two way communication, but only one
direction, either transmitting or receiving data, is
allowed at a time.
FULL-DUPLEX: This method lets the projector
make two way communication, transmitting and
receiving data at the same time.
• HALF-DUPLEX is selected as the default setting.
• When you select HALF-DUPLEX, check the items,
RESPONSE LIMIT TIME and BYTES INTERVAL
TIMEOUT ( 53).
52

OPTION menu

Item

Description
RESPONSE LIMIT TIME
Select the time period to wait for receiving
response data from other device communicating by
the NETWORK BRIDGE and the HALF-DUPLEX
through the CONTROL port.
OFF
1s
2s
3s

SERVICE
(continued)

OFF: Select this mode if it is not required to check
the responses from the device that the projector
sends data to. In this mode, the projector can
send out data from the computer continuously.
1s /2s /3s: Select the time period to keep the
projector waiting for response from the device
that the projector sends data to. While waiting the
response, the projector does not send out any
data from the CONTROL port.
COMMUNICATION
• This menu is available only when the NETWORK
(continued)
BRIDGE is selected for the COMMUNICATION
TYPE and the HALF-DUPLEX is selected for the
TRANSMISSION METHOD ( 52).
• OFF is selected as the default setting.
BYTES INTERVAL TIMEOUT
Select the blank time length to judge that the
response data has ﬁnished in the communicating
in the condition of the NETWORK BRIDGE and
the HALF-DUPLEX through the CONTROL port.
50ms 100ms 150ms 200ms
• This menu is available only when NETWORK
BRIDGE is selected for the COMMUNICATION
TYPE and HALF-DUPLEX is selected for the
TRANSMISSION METHOD ( 52).
• 50ms is selected as the default setting.


53

OPTION menu

Item

Description
INFORMATION
Selecting this item displays a dialog titled “INPUT_INFORMATION”.
It shows the information about the current input.

SERVICE
(continued)

• The “FRAME LOCK” message on the dialog means the frame lock
function is working.
• This item can't be selected for no signal and sync out.
• When the MY TEXT DISPLAY is set to ON, the MY TEXT is
displayed together with the input information in the INPUT_
INFORMATION box ( 65).
FACTORY RESET
Selecting OK using the ► cursor button performs this function.
By this function, all the items in all of menus will collectively return
to the initial setting. Note that the LAMP TIME, FILTER TIME,
LANGUAGE, FILTER MESSAGE, NETWORK, STANDBY MODE,
SECURITY settings, and others are not reset.
CANCEL OK

54

NETWORK menu

NETWORK menu
Remember that incorrect network settings on this
projector may cause trouble on the network. Be sure
to consult with your network administrator before
connecting to an existing access point on your
network.
Select “NETWORK” from the main menu to access
the following functions.
Select an item using the ▲/▼ cursor buttons on the projector or remote control,
and press the ► cursor button on the projector or remote control, or ENTER
button on the remote control to execute the item. Then perform it according to the
following table.
See the User’s Manual - Network Guide for details of NETWORK operation.
NOTE • If you are not utilizing SNTP ( Date/Time Settings of the User’s
Manual - Network Guide), then you must set the DATE AND TIME during the
initial installation.
• The network communication control is disabled while the projector is in
standby mode if the STANDBY MODE item of SETUP menu is set to SAVING.
Please connect the network communication to the projector after setting the
STANDBY MODE to NORMAL ( 39).

Item

Description
Selecting this item displays the SETUP
Menu for the network.
Use the ▲/▼ buttons to select an item,
and the ► or ENTER button on the remote
control to perform the item.

SETUP

Use the ▲/▼ buttons to turn DHCP on/off.
ON
OFF
Select OFF when the network does not have
DHCP enabled.
DHCP
(Dynamic Host • When the “DHCP” setting changes to “ON”, it
Conﬁguration
takes a little time to obtain IP address from DHCP
Protocol)
server.
• Auto IP function will be assigned an IP address if
the projector could not obtain an IP address from
server even if DHCP is “ON”.


55

NETWORK menu

Item

Description

IP ADDRESS

SUBNET
MASK

SETUP
(continued)

Use the ▲/▼/◄/► buttons to enter the IP
ADDRESS.
This function can only be used when DHCP is set
to OFF.
• The IP ADDRESS is the number that identiﬁes
this projector on the network. You cannot have two
devices with the same IP ADDRESS on the same
network.
• The IP ADDRESS “0.0.0.0” is prohibited.
Use the ▲/▼/◄/► buttons to enter the same
SUBNET MASK used by your computer.
to OFF.
• The SUBNET MASK “0.0.0.0” is prohibited.

DEFAULT
GATEWAY

Use the ▲/▼/◄/► buttons to enter the DEFAULT
GATEWAY (a node on a computer network that
serves as an access point to another network)
address.
to OFF.

DNS SERVER

Use the ▲/▼/◄/► buttons to input the DNS
server address.
The DNS server is a system to control domain
names and IP addresses on the Network.

TIME
DIFFERENCE

Use the ▲/▼ buttons to enter the TIME
DIFFERENCE.
Set the same TIME DIFFERENCE as the one
set on your computer. If unsure, consult your IT
manager.
Use the ► button to return to the menu after
setting the TIME DIFFERENCE.

DATE AND
TIME


56

Use the ▲/▼/◄/► buttons to enter the Year (last
two digits), Month, Date, Hour and Minute.
• The projector will override this setting and retrieve
DATE AND TIME information from the Time server
when SNTP is enabled. ( Date/Time Settings
of the User’s Manual - Network Guide)

NETWORK menu

Item

Description

PROJECTOR
NAME

(1) Use the ▲/▼ buttons on the
NETWORK menu to select the
PROJECTOR NAME and press
the ► button. The PROJECTOR
NAME dialog will be displayed.
(2) The current PROJECTOR NAME will be displayed on the first 3
lines. If not yet written, the lines will be blank.
Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to
select and enter characters.
To erase 1 character at one time, press the RESET button or
press the ◄ and INPUT button at the same time. Also if you
move the cursor to DELETE or ALL CLEAR on screen and
push the ENTER or INPUT button, 1 character or all characters
will be erased.The PROJECTOR NAME can be input up to 64
characters.
(3) To change an already inserted
character, press the ▲/▼ button
to move the cursor to one of the
first 3 lines, and use the ◄/►
buttons to move the cursor on the
character to be changed. After
pressing the ENTER or INPUT
button, the character is selected.
Then, follow the same procedure
as described at the item (2) above.
(4) To finish entering text, move the cursor to the OK on screen and
press the ►, ENTER or INPUT button. To revert to the previous
PROJECTOR NAME without saving changes, move the cursor
to the CANCEL on screen and press the ◄, ENTER or INPUT
button.


57

NETWORK menu

Item

Description
Selecting this item displays the MY
IMAGE menu.
The application software “PJImage”
is required to store image(s) into the
projector.
Use the ▲/▼ buttons to select an item which is a still image by the
MY IMAGE ( MY IMAGE (Still Image Transfer) Display of the
User’s Manual - Network Guide) and the ► or ENTER button to
display the image.
• The item without image stored cannot be selected.
• The image names are each displayed in 16 characters or less.

MY IMAGE

To switch the image displayed
Use the ▲/▼ buttons.
To return to the menu
Press the ◄ button on the remote control.
To erase the image displayed and its source ﬁle in the projector.
(1) Press the RESET button on the
remote control while displaying an
image to display the MY IMAGE
DELETE menu.
(2) Press the ► button to perform to erase.
To stop erasing, press the ◄ button.

AMX D.D.
(AMX Device
Discovery)

Use the ▲/▼ buttons to turn the AMX Device Discovery on/off.
ON
OFF
When ON is selected, the projector can be detected by controllers
of AMX connected to the same network. For the details of AMX
Device Discovery, visit the AMX web site.
URL: http://www.amx.com/


58

NETWORK menu

Item

Description
Selecting this item displays the NETWORK_INFORMATION dialog
for conﬁrming the network settings.

INFORMATION
• Only the first 16 characters of the projector neme are displayed.
• Nothing (blank) is shown in the “PROJECTOR NAME” field until
you setup the item ( 57).
• When the voltage level of the battery for the built in clock
decreases, the set time may become incorrect even though accurate
date and time are input. Replace the battery suitably ( 69).
• IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate
“0.0.0.0” when DHCP is ON and the projector has not gotten
address from DHCP server.
Executing this item restarts and initializes the network functions.
Choose the RESTART EXECUTE using the button ►.

Then use the button ► to execute.
SERVICE

Network will be once cut off when choose restart.
If DHCP is selected on, IP address may be changed.
After selecting RESTART EXECUTE, NETWORK menu may not be
controlled approx. 30 seconds.

59

SECURITY menu

SECURITY menu
This projector is equipped with security functions.
From the SECURITY menu, items shown in the table
To use SECURITY menu: User registration is required
before using the security functions.

Enter the SECURITY menu
1. Use the ▲/▼ cursor buttons on the SECURITY menu to select ENTER PASSWORD and press the
► cursor (or the ENTER) button. The ENTER PASSWORD box will be displayed.
2. Use the ▲/▼/◄/► cursor buttons to enter the registered password.
The factory default password is 5110. This password can be
changed ( below). Move the cursor to the right side of the
ENTER PASSWORD box and press the ► cursor (or the ENTER)
button to display the SECURITY menu.
• It is strongly recommended the factory default password to be
changed as soon as possible.
• If an incorrect password is input, the ENTER PASSWORD box
will be displayed again. If incorrect password is input 3 times, the
projector will turn off. Afterwards the projector will turn off every time
an incorrect password is input.
3. Items shown in the table below can be performed.

If you have forgotten your password
(1) While the ENTER PASSWORD box is displayed, press and hold the
RESET (or press the ► cursor and the INPUT buttons at the same
time) button for about 3 seconds.
(2) The 10 digit Inquiring Code will be displayed. Contact your dealer
with the 10 digit Inquiring Code. Your password will be sent after
your user registration information is conﬁrmed.
• If there is no key input for about 55 seconds while the Inquiring Code is displayed, the menu will
close. If necessary, repeat the process from (1).

Item

SECURITY
PASSWORD
CHANGE

Description
(1) Use the ▲/▼ cursor buttons on the
SECURITY menu to select SECURITY
PASSWORD CHANGE and press the ►
cursor (or the ENTER) button to display the
ENTER NEW PASSWORD box.
(2) Use the ▲/▼/◄/► cursor buttons to enter the new password.
(3) Move the cursor to the right side of the
ENTER NEW PASSWORD box and press the
► cursor (or the ENTER) button to display
the NEW PASSWORD AGAIN box, enter the
same password again.
(4) Move the cursor to the right side of the NEW
PASSWORD AGAIN box and press the ►
cursor (or the ENTER) button and the NOTE
NEW PASSWORD box will be displayed for
about 30 seconds, please make note of the
password during this time.
Pressing the ► cursor (or the ENTER) button will close the NOTE NEW
PASSWORD box.
• Please do not forget your password.

60

SECURITY menu

Item

Description
The MyScreen PASSWORD function can be used to prohibit access to the
MyScreen function and prevent the currently registered MyScreen image
from being overwritten.

1 Turning on the MyScreen PASSWORD

MyScreen
PASSWORD

1-1 Use the ▲/▼ cursor buttons on the SECURITY
menu to select MyScreen PASSWORD and
press the ► cursor (or the ENTER) button to
display the MyScreen PASSWORD on/off menu.
1-2 Use the ▲/▼ cursor buttons on the MyScreen
PASSWORD on/off menu to select ON.
The ENTER NEW PASSWORD box (small)
will be displayed.
ENTER NEW PASSWORD
1-3 Use the ▲/▼/◄/► cursor buttons to enter
box (small)
the password. Move the cursor to the right
side of the ENTER NEW PASSWORD
box (small) and press the ► cursor (or
the ENTER) button to display the NEW
PASSWORD AGAIN box, enter the same
PASSWORD again.
1-4 Move the cursor to the right side of the NEW
NOTE NEW PASSWORD box for about 30
seconds, please make note of the password
during this time.
Pressing the ► cursor (or the ENTER) button will return to the MyScreen
PASSWORD on/off menu.
When a password is set for the MyScreen:
• The MyScreen registration function (and menu) will be unavailable.
• The MyScreen Lock menu will be unavailable.
• The START UP setting will be locked on MyScreen (and the menu will be
unavailable).
Turning the MyScreen PASSWORD off will allow normal operation of these
functions.
• Please do not forget your MyScreen PASSWORD.

2 Turning off the MyScreen PASSWORD
2-1 Follow the procedure in 1-1 to display the MyScreen PASSWORD on/off
menu.
2-2 Select the OFF to display the ENTER
PASSWORD box (large). Enter the registered
password and the screen will return to the
MyScreen PASSWORD on/off menu.
ENTER PASSWORD box
(large)
If an incorrect PASSWORD is input, the menu will
close. If necessary, repeat the process from 2-1.

3 If you have forgotten your password
3-1 Follow the procedure in 1-1 to display the MyScreen PASSWORD on/off
menu.
3-2 Select the OFF to display the ENTER PASSWORD box (large). The 10
digit Inquiring Code will be displayed inside the box.
3-3 Contact your dealer with the 10 digit Inquiring Code. Your password will
be sent after your user registration information is conﬁrmed.

61

SECURITY menu

Item

Description
The PIN LOCK is a function which prevents the projector from being used
unless a registered Code is input.

1 Turning on the PIN LOCK

PIN LOCK

menu to select PIN LOCK and press the ►
cursor (or the ENTER) button to display the PIN
LOCK on/off menu.
1-2 Use the ▲/▼ cursor buttons on the PIN
LOCK on/off menu to select ON and the
Enter PIN Code box will be displayed.
1-3 Input a 4 part PIN code using the
▲/▼/◄/►cursor and the COMPUTER (or the
INPUT) button.
The PIN Code again box will appear. Reenter
the same PIN code. This will complete the PIN
code registration.
• If there is no key input for about 55 seconds
while the Enter PIN Code box or the PIN Code again box is displayed,
the menu will close. If necessary, repeat the process from 1-1.
Afterwards, anytime the projector is restarted after AC power is turned off
the Enter PIN Code box will be displayed. Enter the registered the PIN code.
The projector can be used after entering the registered the PIN code. If an
incorrect PIN code is input, the Enter PIN code box will be displayed again.
If an incorrect PIN Code is input 3 times, the projector will turn off.
Afterwards the projector will turn off every time an incorrect PIN code is
input. The projector will also turn off if there is no key input for about 5
minutes while the Enter PIN code box is displayed.
This function will activate only when the projector is started after AC power
is turned off.
• Please do not forget your PIN code.

2 Turning off the PIN LOCK
2-1 Follow the procedure in 1-1 to display the PIN LOCK on/off menu.
2-2 Use the ▲/▼ cursor buttons to select the OFF and the Enter PIN Code
box will be displayed.
Enter the registered the PIN code to turn the PIN LOCK function off.
If an incorrect the PIN Code is input 3 times, the menu will close.

3 If you have forgotten your PIN Code
3-1 While the Enter PIN Code box is displayed, press and hold the RESET (or
press the ◄ cursor and the INPUT buttons at the same time) button for
3 seconds.
The 10 digit Inquiring Code will be displayed.
• If there is no key input for about 5 minutes
while the Inquiring Code is displayed, the
projector will turn off.
3-2 Contact your dealer with the 10 digit Inquiring Code. Your PIN Code will


62

SECURITY menu

Item

Description
・Transition Detector alarm shown below might appear on
screen, if the projector has been moved or re-installed.
・Transition Detector alarm might appear on screen, if the
MIRROR setting has been changed.
• To display the signal again, set this function to the OFF.
• After about 5 minutes of displaying the TRANSITION DETECTOR ON
alarm, the lamp will turn off.
• Keystone adjustment feature has been prohibited as long as the Transition
Detector function is on.

1 Turning on the TRANSITION DETECTOR

TRANSITION
DETECTOR

menu to select the TRANSITION DETECTOR
and press the ► cursor (or the ENTER) button to
display the TRANSITION DETECTOR on/off menu.
1-2 Use the ▲/▼ cursor buttons on the
TRANSITION DETECTOR on/off menu
to select the ON. Select the ON and the
current angle and the MIRROR setting will
be recorded. The ENTER NEW PASSWORD
box (small) will be displayed.
ENTER NEW PASSWORD
box (small)
1-3 Use the ▲/▼/◄/► cursor buttons to enter a
password. Move the cursor to the right side
of the ENTER NEW PASSWORD box (small)
and press the ► cursor (or the ENTER)
button to display the NEW PASSWORD
AGAIN box, enter the same password again.
NOTE NEW PASSWORD box for about 30
seconds, please make note of the password
during this time.
Pressing the ► cursor (or the ENTER) button will return to the TRANSITION
DETECTOR on/off menu.
• Please do not forget your TRANSITION DETECTOR password.
• This function will activate only when the projector is started after turning off the AC power.
• This feature may not function properly if the projector is not in a stable
position when the ON is selected.

2 Turning off the TRANSITION DETECTOR
2-1 Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu.
PASSWORD box (large). Enter the registered
password and the screen will return to the
TRANSITION DETECTOR on/off menu.
If an incorrect password is input, the menu will
ENTER PASSWORD box
(large)

3-1 Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu.
digit Inquiring Code will be displayed inside the box.
3-3 Contact your dealer with the 10 digit Inquiring Code. Your password will


63

SECURITY menu

Item

Description
The MY TEXT PASSWORD function can prevent the MY TEXT from being
overwritten. When the password is set for the MY TEXT;
• The MY TEXT DISPLAY menu will be unavailable, which can prohibit
changing the DISPLAY setting.
• The MY TEXT WRITING menu will be unavailable, which can prevent the
MY TEXT from being overwritten.

1 Turning on the MY TEXT PASSWORD

MY TEXT
PASSWORD

menu to select the MY TEXT PASSWORD and
press the ► cursor (or the ENTER) button to
display the MY TEXT PASSWORD on/off menu.
1-2 Use the ▲/▼ cursor buttons on the MY
TEXT PASSWORD on/off menu to select
the ON. The ENTER NEW PASSWORD box
(small) will be displayed.
1-3 Use the ▲/▼/◄/► cursor buttons to enter
ENTER NEW PASSWORD
box (small)
the password. Move the cursor to the right
side of the ENTER NEW PASSWORD
box (small) and press the ► cursor (or
the ENTER) button to display the NEW
PASSWORD AGAIN box, and then enter the
same password again.
NOTE NEW PASSWORD box for about
30 seconds, then please make note of the
password during this time.
Pressing the ► cursor (or the ENTER) button will return to the MY TEXT
PASSWORD on/off menu.

2 Turning off the MY TEXT PASSWORD
2-1 Follow the procedure in 1-1 to display the MY TEXT PASSWORD on/off
menu.
PASSWORD box (large). Enter the
registered password and the screen will
return to the MY TEXT PASSWORD on/off
ENTER PASSWORD box
(large)
menu.
If an incorrect password is input, the menu will

3-1 Follow the procedure in 1-1 to display the MY TEXT PASSWORD on/off
menu.
digit inquiring code will be displayed inside the box.
3-3 Contact your dealer with the 10 digit inquiring code. Your password will


64

SECURITY menu

Item

Description

MY TEXT
DISPLAY

(1) Use the ▲/▼ cursor buttons on the SECURITY menu to select the MY
TEXT DISPLAY and press the ► cursor (or the ENTER) button to display
the MY TEXT DISPLAY on/off menu.
(2) Use the ▲/▼ cursor buttons on the MY TEXT
DISPLAY on/off menu to select on or off.
ON
OFF
When it is set to the ON, the MY TEXT will be
displayed on the START UP screen and the
INPUT_INFORMATION when the INFORMATION
on the SERVICE menu is chosen.
• This function is available only when the MY TEXT
PASSWORD function is set to the OFF.

MY TEXT
WRITING

(1) Use the ▲/▼ cursor buttons on the SECURITY menu to select the MY
TEXT WRITING and press the ► cursor (or the ENTER) button. The MY
TEXT WRITING dialog will be displayed.
(2) The current the MY TEXT will be
displayed on the first 3 lines. If not yet
written, the lines will be blank.
Use the ▲/▼/◄/► cursor buttons and
the ENTER (or the INPUT) button to
select and enter characters. To erase 1
character at one time, press the RESET
(or press the ◄ cursor and the INPUT
buttons at the same time) button. Also
if you move the cursor to the DELETE
or the ALL CLEAR on screen and press
the ENTER (or the INPUT) button,
1 character or all characters will be
erased. The MY TEXT can be input up
to 24 characters on each line.
(3) To change an already inserted
character, press the ▲/▼ cursor button
to move the cursor to one of the first 3
lines, and use the ◄/► cursor buttons
to move the cursor on the character to
be changed.
After pressing the ENTER (or the INPUT) button, the character is selected.
Then, follow the same procedure as described at the item (2) above.
(4) To finish entering text, move the cursor to the OK on screen and press
the ► cursor (or the ENTER/the INPUT) button. To revert to the previous
MY TEXT without saving changes, move the cursor to the CANCEL on
screen and press the ◄ cursor (or the ENTER/the INPUT) button.
• The MY TEXT WRITING function is available only when the MY TEXT
PASSWORD function is set to the OFF.

65

Maintenance

Maintenance
Replacing the lamp
A lamp has finite product life. Using the lamp for long periods of time could cause
the pictures darker or the color tone poor. Note that each lamp has a different
lifetime, and some may burst or burn out soon after you start using them.
Preparation of a new lamp and early replacement are recommended. To prepare
a new lamp, make contact with your dealer and tell the lamp type number.
Type number : 456-8112
lamp cover
Replacing the lamp
Turn the projector off, and unplug the power cord.
Allow the projector to cool for at least 45 minutes.
Prepare a new lamp. If the projector is mounted on
a ceiling, or if the lamp has broken, also ask the
dealer to replace the lamp.
In case of replacement by yourself, follow the
following procedure.
Loosen the screw (marked by arrow) of the lamp
cover and then slide and lift the lamp cover to the
side to remove it.
Loosen the 2 screws (marked by arrow) of the lamp,
and slowly pick up the lamp by the handles.
Never loosen any other screws.
Insert the new lamp, and retighten firmly the 2
screws of the lamp that are loosened in the previous
process to lock it in place.
While putting the interlocking parts of the lamp cover
and the projector together, slide the lamp cover back in
Handles
place. Then firmly fasten the screw of the lamp cover.
Turn the projector on and reset the lamp time using
the LAMP TIME item in the OPTION menu.
(1) Press the MENU button to display a menu.
(2) Point at the ADVANCED MENU in the menu using the ▲/▼
cursor buttons, then press the ► cursor (or the ENTER) button.
(3) Point at the OPTION in the left column of the menu using the ▲/▼ cursor buttons,
then press the ► cursor (or the ENTER) button.
(4) Point at the LAMP TIME using the ▲/▼ cursor buttons, then press the ► cursor (or
the ENTER / the RESET) button. A dialog will appear.
(5) Press the ► cursor button to select the “OK” on the dialog. It performs resetting the lamp time.
CAUTION ►Do not touch any inner space of the projector, while the lamp
is taken out.

1.
2.
3.
4.
5.
6.
7.

NOTE • Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
66

Maintenance

Replacing the lamp (continued)

Lamp warning
HIGH VOLTAGE

HIGH TEMPERATURE

HIGH PRESSURE

WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp
can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or
worn over time. Note that each lamp has a different lifetime, and some may burst or
burn out soon after you start using them. In addition, if the bulb bursts, it is possible
for shards of glass to fly into the lamp housing, and for gas containing mercury and
dust containing fine particles of glass to escape from the projector’s vent holes.
►About disposal of a lamp: This product contains a mercury lamp; do not put
it in a trash. Dispose of it in accordance with environmental laws.
• For lamp recycling, go to www.lamprecycle.org (in the US).
• For product disposal, consult your local government agency
or www.eiae.org (in the US) or www.epsc.ca (in Canada).
For more information, call your dealer.

Disconnect
the plug
from the
power
outlet

• If the lamp should break (it will make a loud bang when it does),
unplug the power cord from the outlet, and make sure to request a
replacement lamp from your local dealer. Note that shards of glass
could damage the projector’s internals, or cause injury during handling,
so please do not try to clean the projector or replace the lamp yourself.
• If the lamp should break (it will make a loud bang when it does), ventilate the
room well, and make sure not to inhale the gas or fine particles that come out
from the projector's vent holes, and not to get them into your eyes or mouth.
• Before replacing the lamp, turn the projector off and unplug the power
cord, then wait at least 45 minutes for the lamp to cool sufficiently.
Handling the lamp while hot can cause burns, as well as damaging the lamp.
• Never unscrew except the appointed (marked by an arrow) screws.
• Do not open the lamp cover while the projector is suspended from
a ceiling. This is dangerous, since if the lamp’s bulb has broken, the
shards will fall out when the cover is opened. In addition, working in
high places is dangerous, so ask your local dealer to have the lamp
replaced even if the bulb is not broken.
• Do not use the projector with the lamp cover removed. At the lamp
replacing, make sure that the screws are screwed in firmly. Loose
screws could result in damage or injury.
• Use only the lamp of the specified type. Use of a lamp that does not
meet the lamp specifications for this model could cause a fire, damage or
shorten the life of this product.
• If the lamp breaks soon after the first time it is used, it is possible
that there are electrical problems elsewhere besides the lamp. If this
happens, consult your local dealer or a service representative.
• Handle with care: jolting or scratching could cause the lamp bulb to burst during use.
• Using the lamp for long periods of time, could cause it dark, not to light up or to burst.
When the pictures appear dark, or when the color tone is poor, please replace the
lamp as soon as possible. Do not use old (used) lamps; this is a cause of breakage.
67

Maintenance

Cleaning and replacing the air filter
The air filter has two kinds of filters inside. Please check and clean the air filter periodically.
When the indicators or a message prompts you to clean the air filter, comply with it as soon
as possible. If the filters are damaged or heavily soiled, replace them with the new ones. To
prepare the new filters, make contact with your dealer and tell the following type number.

Type number : UX35971 (Filter unit)
When you replace the lamp, please replace the air filter. An air filter of specified type will
come together with a replacement lamp for this projector.
2.
Turn the projector off, and unplug the power cord.
Allow the projector to sufficiently cool down.
Use a vacuum cleaner on and around the filter cover.

1.
2.
3.
4.
5.
6.
7.
8.
9.

3. Filter cover

Pick and pull up the filter cover knobs to take it off.
Use a vacuum cleaner for the filter vent of the projector.
Take the fine meshed filter out while holding the filter
cover. It is recommended to leave the coarse meshed
filter in the filter cover as it is.
Use a vacuum cleaner on both sides of the fine
meshed filter while holding it so it will not be sucked
in. Use a vacuum cleaner for the inside of the filter
cover to clean up the coarse meshed filter. If the filters
are damaged or heavily soiled, replace them with new ones.
Put the fine meshed filter on the coarse meshed one, turning
its stitched side up.
Put the filter unit back into the projector.

Filter cover knobs

4.
Intake vent
Filter unit
Filter cover

7.

Turn the projector on and reset the filter time using the FILTER
TIME item in the EASY MENU.
Filter
(1) Press the MENU button to display a menu.
(coarse meshed)
(2) Point at the FILTER TIME using the ▲/▼ cursor buttons,
then press the ► cursor (or the ENTER / the RESET) button. Filter (fine meshed)
A dialog will appear.
Stitched
(3) Press the ► cursor button to select the “OK” on the dialog.
side
It performs resetting the filter time.

WARNING ►Before taking care of the air filter, make sure the power cable
is not plugged in, then allow the projector to cool sufficiently.
►Use only the air filter of the specified type. Do not use the projector without the
air filter or the filter cover. It could result in a fire or malfunction to the projector.
►Clean the air filter periodically. If the air filter becomes clogged by dust or the like,
internal temperatures rise and could cause a fire, a burn or malfunction to the projector.
NOTE • Please reset the filter time only when you have cleaned or replaced
the air filter, for a suitable indication about the air filter.
• The projector may display the message such as the “CHECK THE AIR FLOW”
or turn off the projector, to prevent the internal heat level rising.
68

Maintenance

Replacing the internal clock battery
Consumption of the battery makes the clock not to work correctly. When the clock
is wrong or it has stopped, please replace the battery according to the following
procedures..

1.
2.

Turn the projector off, and unplug the power cord. Allow the
projector to cool sufficiently.

3.

Turn the battery cover fully in the direction indicated “OPEN”
using a coin or the like, and pick the cover up to
remove it.

4.

Pry up the battery using a flathead screwdriver or the like
to take it out. While prying it up, put a finger lightly on the
battery since it may pop out of the holder.

5.

Replace the battery with a new HITACHI MAXELL or
HITACHI MAXELL ENERGY, Part No.CR2032 or CR2032H.
Slide the battery in under the plastic claw, and push it
into the holder until it clicks.

6.

Battery Cover

Replace the battery cover in place, then turn it in the
direction indicated “CLOSE” using such as coins, to fix.

After making sure that the projector has cooled adequately,
slowly turn over the projector, so that the bottom is facing.

90°
OPEN

OPEN

CLOSE

OPEN
CLOSE

OPEN
CLOSE

CLOSE

90°

WARNING ►Always handle the batteries with care and use them only as
directed. Battery may explode if mistreated. Do not recharge, disassemble or
dispose of in fire.
And also improper use may result in cracking or leakage, which could result in
fire, injury and/or pollution of the surrounding environment.
・Be sure to use only the batteries specified.
・Make sure the plus and minus terminals are correctly aligned when loading a battery.
・Keep a battery away from children and pets. If swallowed consult a physician
immediately for emergency treatment.
・Do not short circuit or solder a battery.
・Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.
・If you observe battery leakage, wipe out the leakage and then replace a battery. If the
leakage adheres to your body or clothes, rinse well with water immediately.
・Obey the local laws on disposing a battery.
69

Maintenance

Other care
Inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and
inspected by your dealer about once every year.
Caring for the lens
• If the lens is flawed, soiled or fogged, it can cause deterioration in display quality.
Handle the projector carefully to prevent the lens from being scratched or soiled.
• If the lens is soiled or fogged, please take care of the lens by following steps
below.

1. Turn the projector off, and unplug the power cord. Allow the projector to cool
sufficiently.
2. Afteramaking sure that the projector is cool adequately, lightly wipe the lens
with commercially available lens-cleaning wipe. Do not touch the lens
directly with your hand.
Caring for the cabinet and remote control
Incorrect care could have adverse influence such as discoloration, peeling paint,
etc.
Turn the projector off, and unplug the power cord. Allow the projector to cool
sufficiently.
After making sure that the projector is cool adequately, lightly wipe with gauze
or a soft cloth.
If the projector is extremely dirty, dip soft cloth in water or a neutral cleaner
diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a
soft, dry cloth.

1.
2.

WARNING ►Before caring, make sure the power cord is not plugged in,
and then allow the projector to cool sufficiently. The care in a high temperature
state of the projector could cause a burn and/or malfunction to the projector.
►Never try to care for the inside of the projector personally. Doing is so
dangerous.
►Avoid wetting the projector or inserting liquids in the projector. It could result in
a fire, an electric shock, and/or malfunction to the projector.
• Do not put anything containing water, cleaners or chemicals near the projector.
• Do not use aerosols or sprays.
CAUTION ►Please take right care of the projector according to the
following. Incorrect care could cause not only an injury but adverse influence
such as discoloration, peeling paint, etc.
►Do not use cleaners or chemicals other than those specified in this manual.
►Do not polish or wipe with hard objects.

70

Troubleshooting

Troubleshooting
If an abnormal operation should occur, stop using the projector immediately.
WARNING ►Never use the projector if abnormal operations such as smoke,
strange odor, excessive sound, damaged casing or elements or cables, penetration
of liquids or foreign matter, etc. should occur. In such cases, immediately disconnect
the power plug from the power outlet. After making sure that the smoke or odor has
stopped, contact to your dealer or service company.
Otherwise if a problem occurs with the projector, the following checks and
measures are recommended before requesting repair.
If this does not resolve the problem, please contact your dealer or service
company. They will tell you what warranty condition is applied.

DUKANE CORP AV SERVICE DEPT
2900 Dukane Drive
St Charles, IL 60174
800-676-2487
Fax 630-584-5156
avservice@dukane.com
http://www.dukane.com/av/service/

71

Troubleshooting

Related messages
When some message appears, check and cope with it according to the following
table. Although these messages will be automatically disappeared around several
minutes, it will be reappeared every time the power is turned on.
Message

Description
There is no input signal.
Please confirm the signal input connection, and the status
of the signal source.
The horizontal or vertical frequency of the input signal
is not within the specified range.
Please confirm the specs for your projector or the signal
source specs.
An improper signal is input.
Please confirm the specs for your projector or the signal
source specs.
The interior temperature is too high, or has increased
or decreased in a short term.
Please turn the power off, and allow the projector to cool
down at least 20 minutes. After having confirmed the
following items, please turn the power on again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
• Does warm or cool air from an air conditioner or similar
unit blow on the projector directly?
If the same indication is displayed after the remedy, please
set FAN SPEED of the SERVICE item in the OPTION menu
to HIGH.
A note of precaution when cleaning the air filter.
Please immediately turn the power off, and clean or change
the air filter referring to the “Cleaning and replacing the
air filter” section of this manual. After you have cleaned or
changed the air filter, please be sure to reset the filter time
( 48).
The button operation is not available (

72

7).

Troubleshooting

Regarding the indicator lamps
When operation of the POWER, TEMP and LAMP indicators differs from usual,
check and cope with it according to the following table.
POWER

TEMP

LAMP

Description

Lighting
The projector is in a standby state.
Turned Turned
In
Please refer to the section “Power on/off”.
off
off
Orange
Blinking
The projector is warming up.
Turned Turned
In
Please wait.
off
off
Green
Lighting
The projector is in an on state.
Turned Turned
In
Ordinary operations may be performed.
off
off
Green
Blinking
The projector is cooling down.
Turned Turned
In
Please wait.
off
off
Orange
Blinking (discre- (discreIn Red tionary) tionary)

Blinking
In Red
Turned Lighting
or
off
In Red
Lighting
In Red

The projector is cooling down. A certain error has
been detected.
Please wait until POWER indicator finishes blinking,
and then perform the proper measure using the item
descriptions below.
The lamp does not light, and there is a possibility that
interior portion has become heated.
Please turn the power off, and allow the projector to
cool down at least 20 minutes. After the projector has
sufficiently cooled down, please make confirmation of the
following items, and then turn the power on again.
• Is there blockage of the air passage aperture?
If the same indication is displayed after the remedy,
please change the lamp referring to the section “Replacing
the lamp”.

The lamp cover has not been properly fixed.
Please turn the power off, and allow the projector to
Blinking
cool down at least 45 minutes. After the projector has
In Red
Turned Blinking sufficiently cooled down, please make confirmation of
or
off
In Red the attachment state of the lamp cover. After performing
Lighting
any needed maintenance, turn the power on again. If the
In Red
same indication is displayed after the remedy, please
contact your dealer or service company.
(Continued on next page)

73

Troubleshooting

Regarding the indicator lamps (continued)
Description
The cooling fan is not operating.
Blinking
down at least 20 minutes. After the projector has sufficiently
In Red
Blinking Turned cooled down, please make confirmation that no foreign
or
matter has become caught in the fan, etc., and then turn the
In Red
off
Lighting
power on again.
In Red
contact your dealer or service company.
POWER

TEMP

LAMP

There is a possibility that the interior portion has
become heated.
down at least 20 minutes. After the projector has sufficiently
cooled down, please make confirmation of the following
Blinking
items, and then turn the power on again.
In Red
Lighting Turned • Is there blockage of the air passage aperture?
or
In Red
off
Lighting
In Red
• Does air from an air conditioner or similar unit blow on the
projector directly?
set FAN SPEED of SERVICE item in OPTION menu to HIGH
( 50).
Lighting
In
Green

Lighting
In
Green

Simultaneous
blinking in Red

It is time to clean the air filter.
Please immediately turn the power off, and clean or change
the air filter referring to the section “Cleaning and replacing
the air filter”. After cleaning or changing the air filter, please
be sure to reset the filter timer.
After the remedy, reset the power to ON.

Alternative
blinking in Red

There is a possibility that the interior portion has
become overcooled.
Please use the unit within the usage temperature parameters
(5°C to 35°C).
After the treatment, reset the power to ON.

At least 1 Power ON schedule is saved to the projector.
Blinking
Please refer to "Schedule Settings" section of User’s Manual
In
Green Turned Turned - Network Guide.
for
off
off
approx.
3
seconds

NOTE • When the interior portion has become overheated, for safety
purposes, the projector is automatically shut down, and the indicator lamps
may also be turned off. In such a case, disconnect the power cord, and wait at
least 45 minutes. After the projector has sufficiently cooled down, please make
confirmation of the attachment state of the lamp and lamp cover, and then turn
the power on again.
74

Troubleshooting

Shutting the projector down

Shutdown switch

Only when the projector can not be turned off by usual
procedure ( 17), please push the shutdown switch using a
pin or similar, and disconnect the power plug from the power
outlet. Before turning it on again, wait at least 10 minutes to
make the projector cool down enough.

Resetting all settings
If it is hard to correct some wrong settings, the FACTORY RESET function
of SERVICE item in OPTION menu ( 54) can reset all settings (except
LANGUAGE, FILTER TIME, LAMP TIME, FILTER MESSAGE, NETWORK,
STANDBY MODE, SECURITY settings, and others) to the factory default.

Phenomena that may be easy to be mistaken for machine defects
About the phenomenon confused with a machine defect, check and cope with it
according to the following table.
Phenomenon

Cases not involving a machine defect

The electrical power cord is not plugged in.
Correctly connect the power cord.

Reference
page
14

The main power source has been interrupted during
operation such as by a power outage (blackout), etc.
Power does not
come on.

Please disconnect the power plug from the power outlet,
and allow the projector to cool down at least 10 minutes,
then turn the power on again.

14, 17

Either there is no lamp and/or lamp cover, or either
of these has not been properly fixed.
Please turn the power off and disconnect the power plug from
the power outlet, and allow the projector to cool down at least
45 minutes. After the projector has sufficiently cooled down,
please make confirmation of the attachment state of the lamp
and lamp cover, and then turn the power on again.

The signal cables are not correctly connected.
Correctly connect the connection cables.

66, 67

10

Signal source does not correctly work.
Correctly set up the signal source device by referring to the
manual of the source device.
Neither sounds
nor pictures are
outputted.

The input changeover settings are mismatched.
Select the input signal, and correct the settings.

–

18, 19

The BLANK function for pictures and the MUTE
function for sounds are working.
AV MUTE may be active.
Refer to the item “Sound does not come out” and “No
pictures are displayed” on the next page to turn off the
MUTE and BLANK functions.


18, 24,
49

75

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon


Correctly connect the audio cables.

Reference
page
10

The MUTE function is working.
Restore the sound pressing MUTE or VOLUME +/- button
on the remote control.

18

The volume is adjusted to an extremely low level.
Adjust the volume to a higher level using the menu function
or the remote control.

18

The AUDIO SOURCE/SPEAKER setting is not correct.
Sound does not
come out.

Correctly set the AUDIO SOURCE/SPEAKER in AUDIO
menu.

40

The audio on your HDMITM equipment is not set to
Linear PCM.
The HDMI input on this projector supports Linear PCM
audio only. Check the audio setting on your HDMITM
equipment.

13

The audio on the HDMI input is muted.
Change the audio setting in the AUDIO menu.

40

The digital audio in HDMITM signal does not work well.
Use the analogue audio, connecting either an RCA audio
cable or stereo mini cable.

10

The lens cover is attached.
Remove the lens cover.

Correctly connect the connection cables.

4
10

The brightness is adjusted to an extremely low level.
No pictures are
displayed.

Adjust BRIGHTNESS to a higher level using the menu
function.

The computer cannot detect the projector as a plug
and play monitor.
Make sure that the computer can detect a plug and play
monitor using another plug and play monitor.

The BLANK screen is displayed.
Press the BLANK button on the remote control.

76

29

13

24

Troubleshooting

Phenomenon


Reference
page

The HDMITM cable is not correctly connected.
Correctly connect the HDMITM cable.

No pictures
or disturbed
pictures are
displayed on
HDMI input.

10

Your HDMITM equipment is not compatible with the
projector.
This projector can be connected with another equipment
that has HDMI or DVI connector, but with some equipment
the projector may not work properly.

13

-

The signal format on the HDMITM is not supported.
Check the video setting on your HDMITM equipment.
Video screen
display freezes.

Your HDMITM equipment and the projector are not
harmonized.
Turn off the both equipment, and turn on them again.

13

The FREEZE function is working.
Press the FREEZE button to restore the screen to normal.

24

Color settings are not correctly adjusted.
Colors have a
faded- out
appearance, or
Color tone is
poor.

Perform picture adjustments by changing the COLOR
TEMP, COLOR, TINT and/or COLOR SPACE settings,
using the menu functions.

30, 31,
34

COLOR SPACE setting is not suitable.
Change the COLOR SPACE setting to AUTO, RGB,
SMPTE240, REC709 or REC601.

34

The brightness and/or contrast are adjusted to an
extremely low level.
Adjust the BRIGHTNESS and/or the CONTRAST settings to
a higher level using the menu function.

38

66, 67

Either the focus and/or horizontal phase settings are
not properly adjusted.
Adjust the focus using the focus ring, and/or the H PHASE
using the menu function.

21, 33

The lens is dirty or misty.
Clean the lens referring to the section “Caring for the lens”.

Pictures appear
blurry.

The ECO MODE function is working.
Select the NORMAL for the ECO MODE item in the SETUP
menu.
The lamp is approaching the end of its product lifetime.
Replace the lamp.

Pictures appear
dark.

29

70


77

Troubleshooting

Phenomenon


When the
ASPECT is
set to NATIVE,
PICTURE
POSITION does
not work even if
the vertical size
of the displayed
image does not
ﬁt visually on
the effective
display area.

Vertical resolution of the input signal is equal to or
more than the vertical resolution of display area that is
determined by D-ZOOM adjustment value.
Change input signal resolution or/and D-ZOOM adjustment
value so that vertical resolution of the input signal is less
than D-ZOOM adjustment value ( 38).

No signal is
The SAVING function is working in the standby state.
output from the Select the NORMAL for the STANDBY MODE item in the
MONITOR OUT SETUP menu.
and AUDIO
OUT ports.

Reference
page

38

39

RS-232C does
not work.
RS-232C does
not work.

The COMMUNICATION TYPE for the CONTROL port is
set to NETWORK BRIDGE.
Select OFF for COMMUNICATION TYPE item in the
OPTION - SERVICE - COMMUNICATION menu.

52

Network does
not work.

The SAVING function is working.
Select the NORMAL for the STANDBY MODE item in the
SETUP menu.

39

NETWORK
BRIDGE
function does
not work.

The NETWORK BRIDGE function is turned off.
Select NETWORK BRIDGE for COMMUNICATION TYPE
item in the OPTION - SERVICE - COMMUNICATION menu.

52

Schedule
function does
not work.

The SAVING function is working.
Select the NORMAL for the STANDBY MODE item in the
SETUP menu.

39

Scheduled
Power
command does
not work.
Scheduled
Input Source
command
function does
not work.
78

Some speciﬁc kinds of errors have been detected.
Check the status of the POWER, TEMP, LAMP
indicators on the control panel of the projector and take
countermeasures referring to the table on page 73 and 74.
Security features are activated and the projector is
locked.
Please release the security lock.

73, 74

60

Troubleshooting

Phenomenon

Scheduled
Display Image
command does
not work.

The lamp is turned off.
If the projector is in the standby state, please press the
STANDBY/ON button on the projector or the remote
control to turn on the lamp. If the POWER, TEMP, LAMP
indicators on the control panel of the projector represent
some errors (such as temperature error, lamp error), take
countermeasures referring to the table on page 73 and 74
and then turn on the lamp.
Security features are activated and the projector is
locked.
Please release the security lock.
Image data for display is not stored in the projector.
No image data for display is registered in the speciﬁed data
store number.
Store image data for display in the projector.
( please refer to "3.5 MY IMAGE (Still Image Transfer)
Display" in the Network guide.)
The lamp is turned off.
If the projector is in the standby state, please press the
STANDBY/ON button on the projector or the remote
control to turn on the lamp. If the POWER, TEMP, LAMP
indicators on the control panel of the projector represent
some errors (such as temperature error, lamp error), take
countermeasures referring to the table on page 73 and 74
and then turn on the lamp.

Reference
page

17, 73,
74

60

-

17, 73,
74

No text data for display is registered.
No text data for display is registered in the speciﬁed data
store number.
Store the text data for display.
( please refer to "3.6 Messenger Function" in the Network
guide.)

-

High-priority text data is being displayed.
The "PJMessenger/Projector Messenger Tool", which is an
application software for Messenger function, has a function
that gives priority to display one of the stored text data in the
projector. While such a high-priority text data is displayed,
other text data scheduled for display at the same time will not
be displayed. ( please refer to "3.6 Messenger Function"
in the Network guide.)

Scheduled
Display Text
command does
not work.

-

NOTE • Although bright spots or dark spots may appear on the screen, this
is a unique characteristic of liquid crystal displays, and it does not constitute or
imply a machine defect.
79

8112 user manual

More Related Content

What's hot (17)

Viewers also liked (7)

Similar to 8112 user manual (20)

More from SchoolVision Inc. (20)

Recently uploaded (20)

8112 user manual