Agm diagnostics and_recovery_toolset_(da_rt)_7

Administrator’s Guide for Microsoft
Diagnostics and Recovery Toolset (DaRT) 7
MDOP Information Experience Team
Summary: Microsoft Diagnostics and Recovery Toolset (DaRT) 7 lets you diagnose and repair
a computer that cannot be started or that has problems starting as expected. By using DaRT 7,
you can recover end-user computers that have become unusable, diagnose probable causes of
issues, and quickly repair unbootable or locked-out computers. When it is necessary, you can
also quickly restore important lost files and detect and remove malware, even when the computer
is not online.
DaRT 7 lets you create a DaRT recovery image in International Organization for Standardization
(ISO) and Windows Imaging (WIM) file formats and burn the image to a CD, DVD, or USB. You
can then use the recovery image files and deploy them locally or to a remote partition or a
recovery partition.
DaRT 7 is an important part of the Microsoft Desktop Optimization Pack (MDOP), a dynamic
solution available to Software Assurance customers that helps reduce software installation costs,
enables delivery of applications as services, and helps manage and control enterprise desktop
environments.
Category: Guide
Applies to: DaRT 7.0
Source: TechNet Library (http://go.microsoft.com/fwlink/?LinkId=217222)
E-book publication date: February 2013

Copyright © 2013 by Microsoft Corporation
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by
any means without the written permission of the publisher.
Microsoft and the trademarks listed at
http://www.microsoft.com/about/legal/en/us/IntellectualProperty/Trademarks/EN-US.aspx are trademarks of
the Microsoft group of companies. All other marks are property of their respective owners.
The example companies, organizations, products, domain names, email addresses, logos, people, places, and
events depicted herein are fictitious. No association with any real company, organization, product, domain
name, email address, logo, person, place, or event is intended or should be inferred.
This book expresses the author’s views and opinions. The information contained in this book is provided
without any express, statutory, or implied warranties. Neither the authors, Microsoft Corporation, nor its
resellers, or distributors will be held liable for any damages caused or alleged to be caused either directly or
indirectly by this book.

Contents
Getting Started with DaRT 7.0 ..................................................................................................... 4
About DaRT 7.0 ........................................................................................................................ 4
Overview of the Tools in DaRT 7.0........................................................................................... 6
Accessibility for DaRT 7.0......................................................................................................... 9
Planning for DaRT 7.0................................................................................................................ 11
Planning to Deploy DaRT 7.0 ................................................................................................. 11
DaRT 7.0 Supported Configurations ................................................................................... 12
Planning to Create the DaRT 7.0 Recovery Image............................................................. 13
Planning How to Save and Deploy the DaRT 7.0 Recovery Image.................................... 14
DaRT 7.0 Planning Checklist.................................................................................................. 15
Deploying DaRT 7.0................................................................................................................... 16
Deploying DaRT 7.0 to Administrator Computers .................................................................. 17
How to Deploy DaRT 7.0..................................................................................................... 17
How to Change, Repair, or Remove DaRT 7.0................................................................... 19
Creating the DaRT 7.0 Recovery Image ................................................................................ 19
How to Use the DaRT Recovery Image Wizard to Create the Recovery Image ................ 20
How to Create a Time Limited Recovery Image ................................................................. 24
Deploying the DaRT 7.0 Recovery Image .............................................................................. 24
How to Deploy the DaRT Recovery Image Using a USB Flash Drive ................................ 25
How to Deploy the DaRT Recovery Image as Part of a Recovery Partition ....................... 26
How to Deploy the DaRT Recovery Image as a Remote Partition ..................................... 27
DaRT 7.0 Deployment Checklist............................................................................................. 27
Operations for DaRT 7.0 ............................................................................................................ 28
Recovering Computers Using DaRT 7.0 ................................................................................ 28
How to Recover Local Computers Using the DaRT Recovery Image ................................ 30
How to Recover Remote Computers Using the DaRT Recovery Image ............................ 31
Diagnosing System Failures with Crash Analyzer.................................................................. 35
How to Run the Crash Analyzer on an End-user Computer ............................................... 36
How to Run the Crash Analyzer in Stand-alone Mode on a Computer Other than an End-
user Computer ................................................................................................................. 37
How to Ensure that Crash Analyzer Can Access Symbol Files .......................................... 37
Security Considerations for DaRT 7.0 .................................................................................... 39
Troubleshooting DaRT 7.0 ......................................................................................................... 40

4
Getting Started with DaRT 7.0
DaRT requires thorough planning before you deploy it or use its features. If you are new to this
product, we recommend that you read the documentation carefully. Before you deploy the
product to a production environment, we also recommend that you validate your deployment plan
in a test network environment. You might also consider taking a class about relevant
technologies. For more information about Microsoft training opportunities, see the Microsoft
Training Overview at http://go.microsoft.com/fwlink/p/?LinkId=80347.
This section provides general information for administrators who are evaluating and using
Microsoft Diagnostics and Recovery Toolset (DaRT) 7.
A downloadable version of this document and the DaRT 7 Evaluation Guide can be
downloaded from http://go.microsoft.com/fwlink/?LinkId=232274.
Getting Started With DaRT 7
 About DaRT 7.0
Provides information specifically related to DaRT including what is new in DaRT 7.
 Overview of the Tools in DaRT 7.0
Provides general information about the tools in Microsoft Diagnostics and Recovery Toolset
(DaRT) 7.
 Accessibility for DaRT 7.0
Provides information about features and services that make this product and its
corresponding documentation more accessible for people with disabilities.
About DaRT 7.0
Microsoft Diagnostics and Recovery Toolset (DaRT) 7 helps you troubleshoot and repair
Windows-based desktops. This includes those desktops that cannot be started. DaRT is a
powerful set of tools that extend the Windows Recovery Environment (WinRE). By using DaRT,
you can analyze an issue to determine its cause, for example, by inspecting the computer’s event
log or system registry.
DaRT also provides tools to help you fix a problem as soon as you determine the cause. For
example, you can use the tools in DaRT to disable a faulty device driver, remove hotfixes, restore
deleted files, and scan the computer for malware even when you cannot or should not start the
installed Windows operating system.
DaRT can help you quickly recover computers that are running either 32-bit or 64-bit versions of
Windows 7, typically in less time than it would take to reimage the computer.
Note

5
About the DaRT 7 Recovery Image
Functionality in DaRT lets you create a recovery image that is based on WinRE combined with a
set of tools that DaRT provides. The DaRT recovery image takes advantage of WinRE, from
which you can access the Diagnostics and Recovery Toolset window.
Use the DaRT Recovery Image Wizard to create the DaRT recovery image. By default, the
wizard creates an International Organization for Standardization (ISO) image file on your desktop
that is named DaRT70.iso, although you can specify a different location and file name. The
wizard also lets you burn the image to a CD or DVD. After you have finished the wizard, you can
save the recovery image to a USB flash drive or save it in a format that you can use to create a
remote partition or a recovery partition.
When you have to use DaRT to startup an end-user computer that will not start, you can follow
the instructions at How to Recover Local Computers Using the DaRT Recovery Image.
For detailed information about the tools in DaRT, see Overview of the Tools in DaRT 7.0.
What’s New in DaRT 7
DaRT 7 continues to support all the scenarios included in previous versions and it adds a new
Remote Connection feature in addition to three new deployment options.
DaRT 7 Image Creation
The wizard that you use to create DaRT ISO images is now called DaRT Recovery Image and it
now supports an option to enable or disable the new Remote Connection feature. Remote
Connection lets a helpdesk agent run the DaRT tools from a remote location. In previous
releases, the helpdesk agent had to be physically present at the end-user computer to run the
DaRT tools.
The wizard also lets you customize the Welcome message for the Remote Connection feature
(the message is shown when end users run the Remote Connection tool). IT Admins can also
configure which Port Number should be used by Remote Connection.
For more information about the DaRT Recovery Image Wizard or Remote Connection, see
Creating the DaRT 7.0 Recovery Image.
DaRT 7 ISO Deployment
In addition to burning to a CD or DVD, DaRT 7 adds three new options when you deploy the ISO
that contains the DaRT recovery image:
 USB flash drive deployment
 Remote partition deployment
 Recovery partition deployment
The USB flash drive deployment option lets a company use DaRT on computers that do not have
CD or DVD drives available. The recovery and remote partition options let end users have easy
access to the DaRT image and to enable the Remote Connection functionality.
For more information about how to deploy DaRT recovery images, see Deploying the DaRT 7.0
Recovery Image.

6
DaRT 7.0 release notes
For more information, and for late-breaking news that did not make it into the documentation, see
the Release Notes for DaRT 7.0.
Overview of the Tools in DaRT 7.0
From the Diagnostics and Recovery Toolset window in Microsoft Diagnostics and Recovery
Toolset (DaRT) 7, you can start any of the individual tools that were included when the DaRT
recovery image was created. For information about how to access the Diagnostics and
Recovery Toolset window, see How to Recover Local Computers Using the DaRT Recovery
Image.
If it is available, you can use the Solution Wizard on the Diagnostics and Recovery Toolset
window to select the tool that best addresses your particular issue, based on a brief interview.
Exploring the DaRT Tools
This section describes the various tools that are part of DaRT.
Registry Editor
You can use Registry Editor to access and change the registry of the Windows operating
system that you are analyzing or repairing. This includes adding, removing, and editing keys and
values, and importing registry (.reg) files.
This topic describes how to change the Windows registry by using Registry Editor. If you
change the Windows registry incorrectly, you can cause serious problems that might
require you to reinstall Windows. You should make a backup copy of the registry files
(System.dat and User.dat) before you change the registry. Microsoft cannot guarantee
that the problems that might occur when you change the registry can be resolved.
Change the registry at your own risk.
Locksmith
The Locksmith Wizard lets you set or change the password for any local account on the
Windows operating system that you are analyzing or repairing. You do not have to know the
current password. However, the password that you set must comply with any requirements that
are defined by a local Group Policy object. This includes password length and complexity.
You can use Locksmith when the password for a local account, such as the local Administrator
account, is unknown. You cannot use Locksmith to set passwords for domain accounts.
Crash Analyzer
Use the Crash Analyzer Wizard to quickly determine the cause of a computer crash by
analyzing the memory dump file on the Windows operating system that you are repairing. Crash
Analyzer examines the crash dump file for the driver that caused a computer to fail. Then, you
Caution

7
can disable the problem device driver by using the Services and Drivers node in the Computer
Management tool.
The Crash Analyzer Wizard requires the Debugging Tools for Windows and symbol files for the
operating system that you are repairing. You can include both requirements when you create the
DaRT recovery image. If they are not included on the recovery image and you do not have
access to them on the computer that you are repairing, you can copy the memory dump file to
another computer and use the stand-alone version of Crash Analyzer to diagnose the problem.
Running Crash Analyzer is a good idea even if you plan to reimage the computer. The image
could have a defective driver that is causing problems in your environment. By running Crash
Analyzer, you can identify problem drivers and improve the image stability.
For more information about Crash Analyzer, see Diagnosing System Failures with Crash
Analyzer.
File Restore
File Restore lets you try to restore files that were accidentally deleted or that were too big to fit in
the Recycle Bin. File Restore is not limited to regular disk volumes, but can find and restore files
on lost volumes or on volumes that are encrypted by BitLocker.
Disk Commander
Disk Commander lets you recover and repair disk partitions or volumes by using one of the
following recovery processes:
 Restore the master boot record (MBR)
 Recover one or more lost volumes
 Restore partition tables from Disk Commander backup
 Save partition tables to Disk Commander backup
We recommend that you back up a disk before you use Disk Commander to repair it. By
using Disk Commander, you can potentially damage volumes and make them
inaccessible. Additionally, changes to one volume can affect other volumes because
volumes on a disk share a partition table.
Disk Wipe
You can use Disk Wipe to delete all data from a disk or volume, even the data that is left behind
after you reformat a hard disk drive. Disk Wipe lets you select from either a single-pass overwrite
or a four-pass overwrite, which meets current U.S. Department of Defense standards.
After wiping a disk or volume, you cannot recover the data. Verify the size and label of a
volume before erasing it.
Warning
Warning

8
Computer Management
Computer Management is a collection of Windows administrative tools that help you
troubleshoot a problem computer. You can use the Computer Management tools in DaRT to
view system information and event logs, manage disks, list autoruns, and manage services and
drivers. The Computer Management console is customized to help you diagnose and repair
problems that might be preventing the Windows operating system from starting.
Explorer
The Explorer tool lets you browse the computer’s file system and network shares so that you can
remove important data that the user stored on the local drive before you try to repair or reimage
the computer. And because you can map drive letters to network shares, you can easily copy and
move files from the computer to the network for safekeeping or from the network to the computer
to restore them.
Solution Wizard
The Solution Wizard presents a series of questions and then recommends the best tool for the
situation, based on your answers. This wizard helps you determine which tool to use when you
are not familiar with the tools in DaRT.
TCP/IP Config
When you boot a problem computer into DaRT, it is set to automatically obtain its TCP/IP
configuration (IP address and DNS server) from Dynamic Host Configuration Protocol (DHCP). If
DHCP is unavailable, you can manually configure TCP/IP by using the TCP/IP Config tool. You
first select a network adapter, and then configure the IP address and DNS server for that adapter.
Hotfix Uninstall
The Hotfix Uninstall Wizard lets you remove hotfixes or service packs from the Windows
operating system on the computer that you are repairing. Use this tool when a hotfix or service
pack is suspected in preventing the operating system from starting.
We recommend that you uninstall only one hotfix at a time, even though the tool lets you uninstall
more than one.
Programs that were installed or updated after a hotfix was installed might not work
correctly after you uninstall a hotfix.
SFC Scan
The SFC Scan tool starts the System File Repair Wizard and lets you repair system files that
are preventing the installed Windows operating system from starting. The System File Repair
Wizard can automatically repair system files that are corrupted or missing, or it can prompt you
before it performs any repairs.
Important

9
Search
Before reimaging a computer, recovering files from the local hard disk is important, especially
when the user might not have backed up or stored the files elsewhere.
The Search tool opens a File Search window that you can use to find documents when you do
not know the file path or to search for general kinds of files across all local hard disks. You can
search for specific file-name patterns in specific paths. You can also limit results to a date range
or size range.
Standalone System Sweeper
The Standalone System Sweeper can help detect malware and unwanted software and warn
you of security risks. You can use this tool to scan a computer for and remove malware even
when the installed Windows operating system is not running. When the Standalone System
Sweeper detects malicious or unwanted software, it prompts you to remove, quarantine, or allow
for each item.
Malware that uses rootkits can mask itself from the running operating system. If a rootkit-enabled
virus or spyware is in a computer, most real-time scanning and removal tools can no longer see it
or remove it. Because you boot the problem computer into DaRT and the installed operating
system is offline, you can detect the rootkit without it being able to mask itself.
Remote Connection
The Remote Connection tool in DaRT lets you remotely run the DaRT tools on an end-user
computer. After certain specific information is provided by the end user (or by a helpdesk
professional working on the end-user computer), the IT administrator can take control of the end
user's computer and run the necessary DaRT tools remotely.
The two computers establishing a remote connection must be part of the same network.
Accessibility for DaRT 7.0
Microsoft is committed to making its products and services easier for everyone to use. This
section provides information about features and services that make this product and its
corresponding documentation more accessible for people with disabilities.
Access Any Command with a Few Keystrokes
Access keys let you quickly use a command by pressing a few keys. You can get to most
commands by using two keystrokes. To use an access key:
1. Press ALT.
The keyboard shortcuts are displayed over each feature that is available in the current view.
2. Press the letter shown in the keyboard shortcut over the feature that you want to use.
To cancel the action that you are taking and hide the keyboard shortcuts, press ALT.
Important
Note

10
Documentation in Alternative Formats
If you have difficulty reading or handling printed materials, you can obtain the documentation for
many Microsoft products in more accessible formats. You can view an index of accessible
product documentation on the Microsoft Accessibility website. In addition, you can obtain
additional Microsoft publications from Learning Ally (formerly Recording for the Blind & Dyslexic,
Inc.). Learning Ally distributes these documents to registered, eligible members of their
distribution service.
For information about the availability of Microsoft product documentation and books from
Microsoft Press, contact:
Learning Ally (formerly Recording for the
Blind & Dyslexic, Inc.)
20 Roszel Road
Princeton, NJ 08540
Telephone number from within the United
States:
(800) 221-4792
Telephone number from outside the United
States and Canada:
(609) 452-0606
Fax: (609) 987-8116
http://www.learningally.org/ Web addresses can change, so you might be
unable to connect to the website or sites
mentioned here.
Customer Service for People with Hearing Impairments
If you are deaf or hard-of-hearing, complete access to Microsoft product and customer services is
available through a text telephone (TTY/TDD) service:
 For customer service, contact Microsoft Sales Information Center at (800) 892-5234 between
6:30 AM and 5:30 PM Pacific Time, Monday through Friday, excluding holidays.
 For technical assistance in the United States, contact Microsoft Product Support Services at
(800) 892-5234 between 6:00 AM and 6:00 PM Pacific Time, Monday through Friday,
excluding holidays. In Canada, dial (905) 568-9641 between 8:00 AM and 8:00 PM Eastern
Time, Monday through Friday, excluding holidays.
Microsoft Support Services are subject to the prices, terms, and conditions in place at the time
the service is used.
For More Information
For more information about how accessible technology for computers helps to improve the lives
of people with disabilities, see the Microsoft Accessibility website.

11
Planning for DaRT 7.0
The goal of deployment planning is to successfully and efficiently deploy a product so that it does
not disrupt your users or the network.
There are a number of different deployment configurations and prerequisites that you must
consider before you create your deployment plan. This section includes information that can help
you gather the information that you must have to formulate a deployment plan that best meets
your business requirements.
Planning information
 Planning to Deploy DaRT 7.0
consider before you create your deployment plan. This section includes information that can
help you gather the information that you must have to formulate a deployment plan that best
meets your business requirements.
 DaRT 7.0 Planning Checklist
This checklist can be used to help you plan for preparing your computing environment for
DaRT 7 deployment.
Planning to Deploy DaRT 7.0
consider before you create your deployment plan. This section includes information that can help
you gather the information that you must have to formulate a deployment plan that best meets
your business requirements.
Consider the following when you plan your Microsoft Diagnostics and Recovery Toolset (DaRT) 7
installation:
 When you install DaRT, you can either install all functionality on an IT administrator computer
where you will perform all the tasks associated with running DaRT. Or you can install only the
DaRT functionality that creates the recovery image on the IT administrator computer. Then,
install the functionality used to run DaRT, such as the DaRT Remote Connection Viewer
and Crash Analyzer, on a helpdesk agent computer.
 To be able to run DaRT remotely, make sure that the helpdesk agent computer and all
computers that you might be troubleshooting remotely are on the same network.
 Before you roll out DaRT into production, you can first build a lab environment for testing. A
test lab should include a minimum of two computers, one to act as the IT
administrator/helpdesk agent computer and one to act as an end-user computer. Or, you can
use three computers in your lab if you want to separate the IT administrator responsibilities
from those of the helpdesk agent.

12
Review the supported configurations
You should review the Microsoft Diagnostics and Recovery Toolset (DaRT) 7 Supported
Configurations information to confirm that the computers you have selected for client or feature
installation meet the minimum hardware and operating system requirements.
DaRT 7.0 Supported Configurations
Plan for creating the DaRT recovery image
When you create the DaRT recovery image, you have to decide which tools to include on the
image. When you make that decision, remember that end users might have access occasionally
to the various DaRT tools. When you create the recovery image, you will also specify whether
you want to include additional drivers or files. Determine the locations of any additional drivers or
files that you want to include on the DaRT recovery image.
You should be aware of the prerequisites and other additional planning recommendations for
creating the DaRT recovery image.
Planning to Create the DaRT 7.0 Recovery Image
Plan for saving and deploying the DaRT recovery image
Several methods can be used to save and deploy the DaRT recovery image. When you are
determining the method that you will use, consider the advantages and disadvantages of each.
Also, consider how you want to use DaRT in your enterprise.
You might want to use more than one method in your organization. For example, you can
boot into DaRT from a remote partition for most situations and have a USB flash drive
available in case the end-user computer cannot connect to the network.
Planning How to Save and Deploy the DaRT 7.0 Recovery Image
DaRT 7.0 Supported Configurations
Your environment may already meet the configuration requirements provided here so that you
can install and run Microsoft Diagnostics and Recovery Toolset (DaRT) 7. These include the
following recovery image and disk space requirements.
DaRT 7 Recovery Image Requirements
No cross-platform recovery image creation is supported. The following table specifies the kind of
recovery image that you should create and deploy in your enterprise:
Platform and DaRT Version Recovery Image Requirements
64-Bit DaRT 7.0 Create and use a 64-Bit DaRT recovery image.
32-Bit DaRT 7.0 Create and use a 32-Bit DaRT recovery image.
Note

13
DaRT 7 End-user Computer Requirements
The Diagnostics and Recovery Toolset window in DaRT requires that the destination computer
use one of the following operating systems together with the specified amount of system memory
available for DaRT:
Operating System System Requirements for DaRT
Windows 7 64-Bit (2GB) 2.5GB of system memory
Windows 7 32-Bit (1GB) 1.5GB of system memory
Windows Server 2008 R2 (512MB) 1GB of system memory
DaRT also has the following minimal hardware requirements:
 A CD or DVD drive or a USB port
This is required if you are deploying DaRT in your enterprise by using a CD, DVD, or USB.
 BIOS support for starting the computer from a CD or DVD, a USB flash drive, or from a
remote or recovery partition
Planning to Create the DaRT 7.0 Recovery Image
Use the information in this section when you plan for creating the Microsoft Diagnostics and
Recovery Toolset (DaRT) 7 recovery image.
Planning to Create the DaRT 7 Recovery Image
When you create the DaRT recovery image, you have to decide which tools to include on the
image. When you make that decision, remember that end users might have access occasionally
to the various DaRT tools. For more information about the DaRT tools, see Overview of the Tools
in DaRT 7.0. For more information about how to help create a secure recovery image, see
Security Considerations for DaRT 7.0.
When you create the DaRT recovery image, you will also specify whether you want to include
additional drivers or files. Determine the locations of any additional drivers or files that you want
to include on the DaRT recovery image.
Prerequisites
The following items are required or recommended for creating the DaRT recovery image:
 Windows 7 source files
You must provide the path of a Windows 7 DVD or of Windows 7 source files. Windows 7
source files are required to create the DaRT recovery image.
 Windows Debugging Tools for your platform
Windows Debugging Tools are required when you run Crash Analyzer to determine the
cause of a computer crash. We recommend that you specify the path of the Windows
Debugging Tools at the time that you create the DaRT recovery image. If it is necessary, you

14
can download the Windows Debugging Tools here: Download and Install Debugging Tools
for Windows.
 Optional: Standalone System Sweeper definitions
The latest definitions for the Standalone System Sweeper are required when you run this
tool. Although you can download the definitions when you run Standalone System Sweeper,
we recommend that you download the latest definitions at the time you create the DaRT
recovery image. In this manner, you can still run the tool with the latest definitions even if the
problem computer does not have network connectivity.
 Optional: Windows symbols files for use with Crash Analyzer
Typically, debugging information is stored in a symbol file that is separate from the
executable. You must have access to the symbol information when you debug an application
that has stopped responding, for example if it crashed. For more information, see Diagnosing
System Failures with Crash Analyzer.
Planning How to Save and Deploy the DaRT 7.0 Recovery Image
Use the information in this section when you plan for saving and deploying the Microsoft
Diagnostics and Recovery Toolset (DaRT) 7 recovery image.
Planning How to Save and Deploy the DaRT Recovery Image
You can save and deploy the DaRT recovery image by using the following methods. When you
are determining the method that you will use, consider the advantages and disadvantages of
each. Also, consider how you want to use DaRT in your enterprise.
You might want to use more than one method in your organization. For example, you can
boot into DaRT from a remote partition for most situations and have a USB flash drive
available in case the end-user computer cannot connect to the network.
The following table shows some advantages and disadvantages of each method of using DaRT in
your organization.
Method to Boot into DaRT Advantages Disadvantages
From a CD or DVD Supports scenarios in which
the master boot record (MBR)
is corrupted and you cannot
access the hard disk. Also
supports cases in which there
is no network connection.
This is most familiar to users of
earlier versions of DaRT, and a
CD or DVD can be burned
directly from the DaRT
Requires that someone with
access to the CD or DVD is
physically at the end-user
computer to boot into DaRT.
Note

15
Method to Boot into DaRT Advantages Disadvantages
Recovery Image Wizard.
From a USB flash drive
(UFD)
Provides same advantages as
booting from a CD or DVD and
also provides support to
computers that have no CD or
DVD drive.
Requires you to format the UFD
before you can use it to boot
into DaRT. Also requires that
someone with access to the
UFD is physically at the end-
user computer to boot into
DaRT.
From a remote (network)
partition
Lets you boot into DaRT
without needing a CD, DVD, or
UFD. Also allows for easy
upgrades of DaRT because
there is only one file location to
update.
Does not work if the end-user
computer is not connected to
the network.
Widely available to end users
and might require additional
security considerations when
you are creating the recovery
image.
From a recovery partition Lets you boot into DaRT
without needing a CD, DVD, or
UFD that includes instances in
which there is no network
connectivity.
Also, can be implemented and
managed as part of your
standard Windows image
process by using automated
distribution tools, such as
System Center Configuration
Manager.
When updating DaRT, requires
you to update all computers in
your enterprise instead of just
one partition (on the network) or
device (CD, DVD, or UFD).
DaRT 7.0 Planning Checklist
This checklist can be used to help you plan for preparing your computing environment for
Microsoft Diagnostics and Recovery Toolset (DaRT) 7 deployment.
This checklist outlines the recommended steps and a high-level list of items to consider
when planning for product deployment. It is recommended that you copy this checklist
into a spreadsheet program and customize it for your use.
Note

16
Task References
Review the DaRT 7 Supported
Configurations information to
confirm that the computers you
have selected for client or
feature installation meet the
minimum hardware and
operating system requirements.
DaRT 7.0 Supported
Configurations
Understand the deployment
prerequisites and decide which
tools to include on the DaRT
recovery image.
Planning to Create the DaRT 7.0
Recovery Image
Determine which method, or
methods, you will use to deploy
the DaRT recovery image.
Planning How to Save and
Deploy the DaRT 7.0 Recovery
Image
Deploying DaRT 7.0
There are a number of different deployment configurations that Microsoft Diagnostics and
Recovery Toolset (DaRT) 7 supports. This section includes information you should consider
about the deployment of DaRT 7 and step-by-step procedures to help you successfully perform
the tasks that you must complete at different stages of your deployment.
Deployment information
 Deploying DaRT 7.0 to Administrator Computers
This section provides information to help you decide on the best DaRT 7 deployment option
for your requirements and then how to deploy it.
 Creating the DaRT 7.0 Recovery Image
This section provides information to help you use the DaRT Recovery Image Wizard to create
the DaRT recovery image ISO.
 Deploying the DaRT 7.0 Recovery Image
This section provides information to help you decide on the best DaRT 7 recovery image
deployment option for your requirements and then how to deploy it.
 DaRT 7.0 Deployment Checklist
This section provides a deployment checklist that can help you in deploying and using
DaRT 7.

17
Deploying DaRT 7.0 to Administrator Computers
Before you begin the deployment of Microsoft Diagnostics and Recovery Toolset (DaRT) 7,
review the requirements for your environment. This includes the hardware requirements for
installing DaRT. For more information about DaRT hardware and software requirements, see
DaRT 7.0 Supported Configurations.
The topics in this section can be used to help you deploy DaRT in your enterprise based on your
environment and deployment strategy.
Deploy DaRT 7.0 to administrator computers
You can use the Windows Installer file for DaRT to install DaRT on a computer that you will use
to first create the DaRT recovery image and then troubleshoot and fix end-user computers.
Frequently, across an organization, you might install on the administrator computer only the
DaRT functionality that you need to create a DaRT recovery image. Then, on a helpdesk
administrator’s computer, you might install only the DaRT functionality that you must have to
troubleshoot a problem computer, such as the DaRT Remote Connection Viewer and the Crash
Analyzer.
In addition to manually running the Windows Installer file to install DaRT, you can also install
DaRT at the command prompt to support enterprise software deployment systems such as
System Center Configuration Manager 2012.
How to Deploy DaRT 7.0
Change, repair, or remove DaRT 7.0
You can change, repair, or remove the DaRT installation by double-clicking the DaRT installation
file and then clicking the button that corresponds to the action that you want to perform or through
the Windows Control Panel.
How to Change, Repair, or Remove DaRT 7.0
How to Deploy DaRT 7.0
This topic provides instructions to deploy Microsoft Diagnostics and Recovery Toolset (DaRT) 7
in your environment. The first procedure in this topic assumes that you are installing all
functionality on one administrator computer. When you need to deploy or uninstall DaRT on
multiple computers, using an electronic software distribution system for example, it might be
easier to use command line installation options. Those options are defined in the second
procedure in this topic which provides example usage for the available command line options.
Before you install DaRT, ensure that the computer meets the minimum system
requirements listed in DaRT 7.0 Supported Configurations.
Important

18
1. Locate the DaRT installation files that you received as part of your software download.
2. Double-click the DaRT installation file that corresponds to your system requirements,
either 32-bit or 64-bit. The DaRT installation file is named MSDaRT70.msi.
3. Accept the Microsoft Software License Terms, and then click Next.
4. Select the destination folder for installing DaRT, select whether DaRT should be installed
for all users or just the current user, and then click Next.
5. Select whether the installation should be Typical, Custom, or Complete, and then click
Next.
 Typical installs the tools that are most frequently used. This method is recommended
for most users.
 Custom lets you select the tools that are installed and where they will be installed.
This is recommended for advanced users, especially if you are installing different
DaRT tools on different helpdesk computers.
 Complete installs all DaRT tools and requires the most disk space.
After you have selected your method of installation, click Next.
6. To start the installation, click Install.
7. After the installation is completed successfully, click Finish to exit the wizard.
1. The following example shows how to install all DaRT functionality.
msiexec /i MSDaRT70.msi
ADDLOCAL=CommonFiles,MSDaRTHelp,DaRTRecoveryImage,CrashAnalyz
er,RemoteViewer
2. The following example shows how to install only the DaRT Recovery Image Wizard.
ADDLOCAL=CommonFiles,MSDaRTHelp,DaRTRecoveryImage
3. The following example shows how to install only the Crash Analyzer and the DaRT
Remote Connection Viewer.
ADDLOCAL=CommonFiles,MSDaRTHelp,CrashAnalyzer,RemoteViewer
4. The following example creates a setup log for the Windows Installer. This is valuable for
debugging.
msiexec.exe /i MSDaRT70.msi /l*v log.txt
To install DaRT on an administrator computer
To install DaRT at the command prompt

19
Note
You can add /qn or /qb to any of the DaRT installation command prompt options to
perform a silent installation.
How to Change, Repair, or Remove DaRT 7.0
You can change, repair, or remove the Microsoft Diagnostics and Recovery Toolset (DaRT) 7
installation by double-clicking the DaRT installation file and then clicking the button that
corresponds to the action that you want to perform.
You can also change, repair, or remove the DaRT installation using the Windows Control Panel
by following the steps described in the procedure in this topic.
1. Click Start and then click Control Panel.
2. Click Programs and Features.
3. Click Microsoft Diagnostics and Recovery Toolset 7.0 and then click the button that
corresponds to the action that you want to perform.
Creating the DaRT 7.0 Recovery Image
Microsoft Diagnostics and Recovery Toolset (DaRT) 7 includes the DaRT Recovery Image
Wizard that is used in Windows to create a bootable International Organization for
Standardization (ISO) image. An ISO image is a file that represents the raw contents of a CD.
Use the DaRT Recovery Image Wizard to Create the Recovery Image
The ISO created by the DaRT Recovery Image Wizard contains the DaRT recovery image that
lets you boot into a problem computer, even if it might otherwise not start. After you boot the
computer into DaRT, you can run the different DaRT tools to try to diagnose and repair the
computer.
You can write the ISO to a recordable CD or DVD, save it to a USB flash drive, or save it in a
format that you can use to boot into DaRT from a remote partition or from a recovery partition. For
more information, see Deploying the DaRT 7.0 Recovery Image.
If your computer includes a CD-RW drive, the wizard offers to burn the ISO image to a
blank CD or DVD. If your computer does not include a drive that is supported by the
wizard, you can burn the ISO image onto a CD or DVD by using most programs that can
burn a CD or DVD.
To create a bootable CD or DVD from the ISO image, you must have:
 A CD-RW drive.
To change, repair, or remove DaRT
Note

20
 A recordable CD or DVD (in a format supported by the recordable drive).
 Software that supports the recordable drive and supports burning an ISO image directly to
CD or DVD.
Test the CD or DVD that you create on all the different kinds of computers that you
intend to support because some computers cannot start from all kinds of recordable
media.
To save the ISO image to a USB flash drive (UFD), you must have:
 A correctly formatted UFD.
 A program that you can use to mount the ISO image.
How to Use the DaRT Recovery Image Wizard to Create the Recovery Image
Create a Time Limited Recovery Image
You can create a DaRT recovery image that can only be used for a certain number of days after it
is generated. To do this, you must run the DaRT Recovery Image Wizard at a command prompt
and specify the number of days.
How to Create a Time Limited Recovery Image
How to Use the DaRT Recovery Image Wizard to Create the Recovery Image
Microsoft Diagnostics and Recovery Toolset (DaRT) 7 includes the DaRT Recovery Image
Wizard that is used in Windows to create a bootable International Organization for
Standardization (ISO) image. An ISO image is a file that represents the raw contents of a CD.
The DaRT Recovery Image Wizard requires the following information:
 Boot Image˚˚You must provide the path of a Windows 7 DVD or Windows 7 source files that
are required to create the DaRT recovery image.
 Tool Selection˚˚You can select the tools to include on the DaRT recovery image.
 Remote Connections˚˚You can select whether you want the DaRT recovery image to
include the ability to establish a remote connection between the helpdesk and the end-user
computer.
 Debugging Tools for Windows˚˚You are asked to provide the location of the Debugging
Tools for Windows.
 Definitions for Standalone System Sweeper˚˚You can decide whether to download the
latest definitions at the time that you create the recovery image or download the definitions
later.
 Drivers˚˚You are asked whether you want to add drivers to the ISO image.
 Additional Files˚˚You can add files to the ISO image that might help diagnose problems.
 ISO Image Location˚˚You are asked to specify where the ISO image should be located.
 CD/DVD Drive˚˚You are asked to specify whether the CD or DVD drive should be used to
burn the CD or DVD.
Important

21
The ISO image size can vary, depending on the tools that were selected in the DaRT
Recovery Image Wizard.
To create the recovery image using the DaRT Recovery Image Wizard
Follow these instructions to use the DaRT Recovery Image Wizard to create the DaRT recovery
image.
To select the tools to include on the DaRT recovery image
The DaRT Recovery Image Wizard presents a Tool Selection dialog box. You can select or
remove tools from the list of tools to be included on the DaRT recovery image by highlighting a
tool and then clicking the Enable or Disable buttons.
After you have selected all the tools that you want to include on the recovery image, click Next.
To add the option to allow remote connectivity
You can select the Allow remote connections check box to provide the option in the
Diagnostics and Recovery Toolset window to establish a remote connection between the
helpdesk agent and an end-user computer. After a helpdesk agent establishes a remote
connection, they can run the DaRT tools on the end-user computer from a remote location.
You can select the Specify the port number check box to enter a specific port number that will
be used when establishing a remote connection. You can specify a port number between 1 and
65535. We recommend that the port number be 1024 or higher to minimize the possibility of a
conflict.
You can also create a customized message that an end user will receive when they establish a
remote connection. The message can be a maximum of 2048 characters.
For more information about remotely running the DaRT tools, see How to Recover a Remote
Computer by Using the DaRT Recovery Image.
To add the Debugging Tools for Windows to the DaRT recovery image
In the Crash Analyzer dialog box of the DaRT Recovery Image Wizard, you are asked to
specify the location of the Debugging Tools for Windows. If you do not have a copy of the tools,
you can download them from Microsoft. The following link to the download page is provided in the
wizard: Download and Install Debugging Tools for Windows.
You can either specify the location of the debugging tools on the computer where you are running
the DaRT Recovery Image Wizard, or you can decide to use the tools that are located on the
destination computer. If you decide to use a copy on another computer, you must make sure that
the tools are installed on each computer on which you are diagnosing a crash.
If you include the Crash Analyzer in the ISO image, we recommend that you also
include the Debugging Tools for Windows.
Note
Note

22
Follow these steps to add the Debugging Tools for Windows:
1. (Optional) Click the hyperlink to download the Debugging Tools for Windows.
2. Select one of the following options:
 Use the Debugging Tools for Windows in the following location. If you select this
option, you can browse to the location of the tools.
 Locate the Debugging Tools for Windows on the system that you are repairing. If
you select this option, the Crash Analyzer will not work if the Debugging Tools for
Windows are not found on the problem computer.
3. After you have finished, click Next.
To add definitions for Standalone System Sweeper to the DaRT recovery image
Definitions are a repository of known malware and other potentially unwanted software. Because
malware is being continually developed, Standalone System Sweeper relies on current
definitions to determine whether software that is trying to install, run, or change settings on a
computer is potentially unwanted or malicious software.
To include the latest definitions in the DaRT recovery image (recommended), click Yes,
download the latest definitions. The definition update starts automatically. You must be
connected to the Internet to complete this process.
To skip the definition update, click No, manually download definitions later. Definitions will not
be included in the DaRT recovery image.
If you decide not to include the latest definitions on the recovery image, or if the definitions
included on the recovery image are no longer current by the time that you are ready to use
Standalone System Sweeper, obtain the latest definitions before you begin a scan by following
the instructions that are provided in the Standalone System Sweeper.
You cannot scan if there are no definitions.
After you have finished, click Next.
To add drivers to the DaRT recovery image
By default, when you add a driver to the DaRT recovery image, all additional files and
subfolders that are located in that folder are added into the recovery image. For more
information, see Troubleshooting DaRT 7.0.
You should include additional drivers on the recovery image for DaRT 7 that you may need when
repairing a computer. These may typically include storage or network controllers that are not
included on the Windows DVD.
When you select drivers to include, be aware that wireless connectivity (such as
Bluetooth or 802.11a/b/g/n) is not supported in DaRT.
Important
Caution
Important

23
1. In the Additional Drivers dialog box of the DaRT Recovery Image Wizard, click Add
Device.
2. Browse to the file to be added for the driver, and then click Open.
Note
The driver file is provided by the manufacturer of the storage or network
controller.
3. Repeat Steps 1 and 2 for every driver that you want to include.
To add files to the DaRT recovery image
Follow these steps to add files to the recovery image so that you can use them to diagnose
computer problems.
1. In the Additional Files dialog box of the DaRT Recovery Image Wizard, click Show Files.
This opens an Explorer window that displays the folder that holds the shared files.
2. Create a subfolder in the folder that is listed in the dialog box.
3. Copy the files that you want to the new subfolder.
To select a location for the ISO that contains the DaRT recovery image
Follow these steps to specify the location where the ISO image is created:
1. In the Create Startup Image dialog box of the DaRT Recovery Image Wizard, click
Browse.
2. Browse to the preferred location in the Save As window, and then click Save.
The size of the ISO image will vary, depending on the tools that you select and the files that you
add in the wizard.
The wizard requires the ISO image to have an .iso file name extension because most programs
that burn a CD or DVD require that extension. If you do not specify a different location, the ISO
image is created on your desktop with the name DaRT70.ISO.
To burn the recovery image to a CD or DVD
If the DaRT Recovery Image Wizard detects a compatible CD-RW drive on your computer, it
offers to burn the ISO image to a disc for you. If you want to burn a CD or DVD and the wizard
does not recognize your drive, you must use another program, such as the program that was
included with your drive. You can use a duplicator, a duplicating service, or CD or DVD-burning
software to make any additional copies.
1. In the Burn to a recordable CD/DVD dialog box of the DaRT Recovery Image Wizard,
select Burn the image to the following recordable CD/DVD drive.
2. Select the CD or DVD drive.
To add a storage or network controller driver to the recovery image

24
If a drive is not recognized and you install a new drive, you can click Refresh Drive
List to force the wizard to update the list of available drives.
3. Click Next.
How to Create a Time Limited Recovery Image
You can create a DaRT recovery image that can only be used for a certain number of days after it
is generated. To do this, you must run the DaRT Recovery Image Wizard at a command prompt
and specify the number of days.
1. Open a Command Prompt with administrator credentials.
2. Change the directory to the location of the ERDC.exe program.
3. Using the following syntax, run the DaRT Recovery Image Wizard. NumberOfDays is a
positive integer that represents the number of days that the DaRT recovery image will be
usable.
ERDC /e NumberOfDays
Deploying the DaRT 7.0 Recovery Image
After you have created the International Organization for Standardization (ISO) file that contains
the Microsoft Diagnostics and Recovery Toolset (DaRT) 7 recovery image, you can deploy the
DaRT recovery image throughout your enterprise so that it is available to end users and helpdesk
agents. There are four supported methods that you can use to deploy the DaRT recovery image
(for more information about each method and the advantages and disadvantages of each, see
Planning How to Save and Deploy the DaRT 7.0 Recovery Image).
 Burn the ISO image file to a CD or DVD
 Save the contents of the ISO image file to a USB Flash Drive (UFD)
 Extract the boot.wim file from the ISO image and deploy as a remote partition that is available
to end-user computers
 Extract the boot.wim file from the ISO image and deploy in the recovery partition of a new
Windows 7 installation
The DaRT Recovery Image Wizard only provides the option to burn a CD or DVD. All
other methods of saving and deploying the recovery image require additional steps that
involve tools that are not included in DaRT. Some guidance and links for these other
methods are provided in this section.
Note
To create a recovery image that has a time limit
Important

25
Deploy the DaRT Recovery Image Using a USB Flash Drive
After you have finished running the DaRT Recovery Image Wizard, you can use the tool at
http://go.microsoft.com/fwlink/?LinkId=218888 to copy the ISO image file to a USB flash drive
(UFD).
How to Deploy the DaRT Recovery Image Using a USB Flash Drive
Deploy the DaRT Recovery Image as Part of a Recovery Partition
After you have finished running the DaRT Recovery Image Wizard and created the recovery
image, you can extract the boot.wim file from the ISO image file and deploy it as a recovery
partition in a Windows 7 image.
How to Deploy the DaRT Recovery Image as Part of a Recovery Partition
Deploy the DaRT Recovery Image as a Remote Partition
image, you can extract the boot.wim file from the ISO image file and deploy it as a remote
partition on the network.
How to Deploy the DaRT Recovery Image as a Remote Partition
How to Deploy the DaRT Recovery Image Using a USB Flash Drive
After you have finished running the DaRT Recovery Image Wizard, you can use the tool at
http://go.microsoft.com/fwlink/?LinkId=218888 to copy the ISO image file to a USB flash drive
(UFD).
You can also manually copy the ISO image file to a UFD by following the steps provided in this
section.
1. Format the USB flash drive.
a. From a running valid operating system or Windows PE session, insert your UFD.
b. At the command prompt with administrator permissions, type DISKPART and then
type LIST DISK.
The Command Prompt window displays the disk number of your UFD, for example
DISK 1.
c. Enter the following commands one at a time at the command prompt.
SELECT DISK 1
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
To save the DaRT recovery image to a USB flash drive

26
FORMAT FS=NTFS
ASSIGN
EXIT
Note
The previous code example assumes Disk 1 is the UFD. If it is necessary,
replace DISK 1 with your disk number.
2. By using your company’s preferred method of mounting an image, mount the ISO image
file that you created in the Create Startup Image dialog box of the DaRT Recovery
Image Wizard. This requires that you have a method available to mount an image file.
3. Open the mounted ISO image file and copy all its contents to the formatted USB flash
drive.
Note
If you burned a CD or DVD of the recovery image, you can open the files on the
CD or DVD and copy the contents to the UFD. This lets you skip the need to
mount the image.
How to Deploy the DaRT Recovery Image as Part of a Recovery Partition
image, you can extract the boot.wim file from the ISO image file and deploy it as a recovery
partition in a Windows 7 image.
1. Create a target partition in your Windows 7 image that is equal to or greater than the size
of the ISO image file that you created by using the DaRT Recovery Image Wizard.
The minimum size required for a DaRT partition is approximately 300MB. However, we
recommend 450MB to accommodate for the remote connection functionality in DaRT.
2. Extract the boot.wim file from the DaRT ISO image file.
a. Mount the ISO image file that you created in the Create Startup Image dialog box by
using your company’s preferred method of mounting an image.
b. Open the ISO image file and copy the boot.wim file from the sources folder in the
mounted image to a location on your computer or on an external drive.
Note
If you burned a CD or DVD of the recovery image, you can open the files on
the CD or DVD and copy the boot.wim file from the sources folder. This lets
you skip the need to mount the image.
3. Use the boot.wim file to create a bootable recovery partition by using your company’s
standard method for creating a custom Windows RE image.
To deploy DaRT in the recovery partition of a Windows 7 image

27
For more information about how to create or customize a recovery partition, see
Customizing the Windows RE Experience.
4. Replace the target partition in your Windows 7 image with the recovery partition.
After your Windows 7 image is ready, distribute the image to computers in your enterprise by
using your company’s standard image deployment process. For more information about how
to create a Windows 7 image, see Building a Standard Image of Windows 7: Step-by-Step
Guide.
For more information about how to deploy a recovery solution to reinstall the factory image in
the event of a system failure, see Deploy a System Recovery Image.
How to Deploy the DaRT Recovery Image as a Remote Partition
image, you can extract the boot.wim file from the ISO image file and deploy it as a remote
partition on the network.
1. Extract the boot.wim file from the DaRT ISO image file.
a. Mount the ISO image file that you created in the Create Startup Image dialog box by
using your company’s preferred method of mounting an image.
b. Open the ISO image file and copy the boot.wim file from the sources folder in the
mounted image to a location on your computer or on an external drive.
Note
If you burned a CD or DVD of the recovery image, you can open the files on
the CD or DVD and copy the boot.wim file from the sources folder. This lets
you skip the need to mount the image.
2. Deploy the boot.wim file to a WDS server that can be accessed from end-user computers
in your enterprise.
3. Configure the WDS server to use the boot.wim file for DaRT by following your standard
WDS deployment procedures.
For more information about how to deploy DaRT as a remote partition, see the following:
 Walkthrough: Deploy an Image by Using PXE
 Windows Deployment Services Getting Started Guide
DaRT 7.0 Deployment Checklist
This checklist can be used to help you during Microsoft Diagnostics and Recovery Toolset
(DaRT) 7 deployment.
To deploy DaRT as a remote partition

28
This checklist outlines the recommended steps and a high-level list of items to consider
when planning for product deployment. It is recommended that you copy this checklist
into a spreadsheet program and customize it for your use.
Task References
Decide on the best DaRT 7
deployment option for your
requirements and deploy it.
Deploying DaRT 7.0 to
Administrator Computers
Use the DaRT Recovery Image
Wizard to create the DaRT
recovery image ISO.
Creating the DaRT 7.0 Recovery
Image
Decide on the best DaRT 7
recovery image deployment
option for your requirements and
deploy it.
Deploying the DaRT 7.0
Recovery Image
Operations for DaRT 7.0
This section of the Administrator’s Guide includes information about the various types of Microsoft
Diagnostics and Recovery Toolset (DaRT) 7 administration and operating tasks that are typically
performed by an administrator. This section also includes step-by-step procedures to help you
successfully perform those tasks.
Operations information
 Recovering Computers Using DaRT 7.0
This section provides information to help you recover computers using the DaRT 7 recovery
image.
 Diagnosing System Failures with Crash Analyzer
This section provides information to help you use the DaRT 7 Crash Analyzer to diagnose
system failures.
 Security Considerations for DaRT 7.0
This section provides information to help you follow security best practices while using
DaRT 7.
Recovering Computers Using DaRT 7.0
There are two methods available to recover computers using Microsoft Diagnostics and Recovery
Toolset (DaRT) 7. You can either run the DaRT 7 recovery image locally or use The Remote
Note

29
Connection feature available in DaRT 7 to recover a remote computer. Both methods are
described in more detail in this section.
Recover Local Computers by Using the DaRT Recovery Image
To recover a local computer by using DaRT 7, you must be physically present at the end-user
computer that is experiencing problems that require DaRT.
You have several different methods to choose from to boot into DaRT, depending on how you
deploy the DaRT recovery image.
 Insert a DaRT recovery image CD, DVD, or USB flash drive into the problem computer and
use it to boot into the computer.
 Boot into DaRT from a recovery partition on the problem computer.
 Boot into DaRT from a remote partition on the network.
For information about the advantages and disadvantages of each method, see Planning How to
Save and Deploy the DaRT 7.0 Recovery Image.
Whichever method that you use to boot into DaRT, you must enable the boot device in the BIOS
for the boot option or options that you want to make available to the end user.
Configuring the BIOS is unique, depending on the kind of hard disk drive, network
adapters, and other hardware that is used in your organization.
How to Recover Local Computers Using the DaRT Recovery Image
Recover Remote Computers by Using the DaRT Recovery Image
The Remote Connection feature in DaRT lets an IT administrator run the DaRT tools remotely on
an end-user computer. After certain information is provided by the end user (or by a helpdesk
professional working on the end-user computer), the IT administrator or helpdesk agent can take
control of the end user's computer and run the necessary DaRT tools remotely.
The Diagnostics and Recovery Toolset window includes the option to run DaRT on an end-
user computer remotely from an administrator computer. The end user opens the DaRT tools on
the problem computer and starts the remote session by clicking Remote Connection.
The Remote Connection feature on the end-user computer creates the following connection
information: a ticket number, a port, and a list of all available IP addresses. The ticket number
and port are generated randomly.
The IT administrator or helpdesk agent enters this information into the DaRT Remote
Connection Viewer to establish the terminal services connection to the end-user computer. The
terminal services connection that is established lets an IT administrator remotely interact with the
DaRT tools on the end-user computer. The end-user computer then processes the connection
information, shares its screen, and responds to instructions from the IT administrator computer.
Note
Important

30
How to Recover Remote Computers Using the DaRT Recovery Image
How to Recover Local Computers Using the DaRT Recovery Image
To recover a local computer by using Microsoft Diagnostics and Recovery Toolset (DaRT) 7, you
must be physically present at the end-user computer that is experiencing problems that require
DaRT. You can also run DaRT remotely by following the instructions at How to Recover Remote
Computers Using the DaRT Recovery Image.
1. As the computer is booting into the DaRT recovery image, the NetStart dialog box
appears. You are asked whether you want to initialize network services. If you click Yes,
it is assumed that a DHCP server is present on the network and an attempt is made to
obtain an IP address from the server. If the network uses static IP addresses instead of
DHCP, you can later use the TCP/IP Configuration tool in DaRT to specify a static IP
address.
To skip the network initialization process, click No.
2. Following the network initialization dialog box, you are asked whether you want to remap
the drive letters. When you run Windows online, the system volume is typically mapped
to drive C. However, when you run Windows offline under WinRE, the original system
volume might be mapped to another drive, and this can cause confusion. If you decide to
remap, DaRT tries to map the offline drive letters to match the online drive letters.
Remapping is performed only if an offline operating system is selected later in the startup
process.
3. Following the remapping dialog box, a System Recovery Options dialog box appears
and asks you to select a keyboard layout. Then it displays the system root directory, the
kind of operating system installed, and the partition size. If you do not see your operating
system listed, and suspect that the lack of drivers is a possible cause of the failure, click
Load Drivers to load the suspect drivers. This prompts you to insert the installation
media for the device and to select the driver. Select the installation that you want to repair
or diagnose, and then click Next.
Note
If the Windows Recovery Environment (WinRE) detects or suspects that
Windows 7 did not start correctly the last time that it was tried, Startup Repair
might start to run automatically.
If any of the registry hives are corrupted or missing, Registry Editor, and several other
DaRT utilities, will have limited functionality. If no operating system is selected, some
tools will not be available.
The System Recovery Options window appears and lists various recovery tools.
4. On the System Recovery Options window, click Microsoft Diagnostics and Recovery
Toolset.
To recover a local computer by using DaRT

31
The Diagnostics and Recovery Toolset window opens. You can now run any of the
individual tools or wizards that were included when the DaRT recovery image was
created.
You can click Help on the Diagnostics and Recovery Toolset window to open the client
Help file that provides detailed instruction and information needed to run the individual DaRT
tools. You can also click the Solution Wizard on the Diagnostics and Recovery Toolset
window to choose the best tool for the situation, based on a brief interview that the wizard
provides.
For general information about any of the DaRT tools, see Overview of the Tools in DaRT 7.0.
 You can run DaRT at the command prompt by specifying the netstart.exe command and
by using any of the following parameters:
Parameter Description
-network Initializes the network services.
-remount Remaps the drive letters.
-prompt Displays messages asking the end user to
specify whether to initialize the network and
remap the drives.
Important
The end user’s response to the
prompts overrides the -network
and -remount switches.
 You can customize DaRT so that a computer that boots into DaRT automatically opens
the Remote Connection tool that is used to establish a remote connection with the help
desk.
How to Recover Remote Computers Using the DaRT Recovery Image
The Remote Connection feature in Microsoft Diagnostics and Recovery Toolset (DaRT) 7 lets an
IT administrator run the DaRT tools remotely on an end-user computer. After certain information
is provided by the end user (or by a helpdesk professional working on the end-user computer),
the IT administrator or helpdesk agent can take control of the end user's computer and run the
necessary DaRT tools remotely.
To run DaRT at the command prompt
Important

32
1. Boot an end-user computer by using the DaRT recovery image.
You will typically use one of the following methods to boot into DaRT to recover a remote
computer, depending on how you deploy the DaRT recovery image. For more information
about deploying the DaRT recovery image, see Deploying the DaRT 7.0 Recovery
Image.
 Boot into DaRT from a recovery partition on the problem computer.
 Boot into DaRT from a remote partition on the network.
For information about the advantages and disadvantages of each method, see Planning
How to Save and Deploy the DaRT 7.0 Recovery Image.
Whichever method that you use to boot into DaRT, you must enable the boot device in
the BIOS for the boot option or options that you want to make available to the end user.
Note
Configuring the BIOS is unique, depending on the kind of hard disk drive,
network adapters, and other hardware that is used in your organization.
2. As the computer is booting into the DaRT recovery image, the NetStart dialog box
appears. You are asked whether you want to initialize network services. If you click Yes,
it is assumed that a DHCP server is present on the network and an attempt is made to
obtain an IP address from the server. If the network uses static IP addresses instead of
DHCP, you can later use the TCP/IP Configuration tool in DaRT to specify a static IP
address.
To skip the network initialization process, click No.
3. Following the network initialization dialog box, you are asked whether you want to remap
the drive letters. When you run Windows online, the system volume is typically mapped
to drive C. However, when you run Windows offline under WinRE, the original system
volume might be mapped to another drive, and this can cause confusion. If you decide to
remap, DaRT tries to map the offline drive letters to match the online drive letters.
Remapping is performed only if an offline operating system is selected later in the startup
process.
4. Following the remapping dialog box, a System Recovery Options dialog box appears
and asks you to select a keyboard layout. Then it displays the system root directory, the
kind of operating system installed, and the partition size. If you do not see your operating
system listed, and suspect that the lack of drivers is a possible cause of the failure, click
Load Drivers to load the suspect drivers. This prompts you to insert the installation
media for the device and to select the driver. Select the installation that you want to repair
or diagnose, and then click Next.
Note
If the Windows Recovery Environment (WinRE) detects or suspects that
Windows 7 did not start correctly the last time that it was tried, Startup Repair
To recover a remote computer by using DaRT

33
might start to run automatically. For information about this situation including how
to resolve it, see Troubleshooting DaRT 7.0.
If any of the registry hives are corrupted or missing, Registry Editor, and several other
DaRT utilities, will have limited functionality. If no operating system is selected, some
tools will not be available.
The System Recovery Options window appears and lists various recovery tools.
5. On the System Recovery Options window, select Microsoft Diagnostics and
Recovery Toolset to open the Diagnostics and Recovery Toolset window.
6. On the Diagnostics and Recovery Toolset window, click Remote Connection to open
the DaRT Remote Connection window. If you are prompted to give the help desk
remote access, click OK.
The DaRT Remote Connection window opens and displays a ticket number, IP address,
and port information.
7. On the helpdesk agent computer, open the DaRT Remote Connection Viewer.
Click Start, click All Programs, click Microsoft DaRT 7, and then click DaRT Remote
Connection Viewer.
8. In the DaRT Remote Connection window, enter the required ticket, IP address, and port
information.
Note
This information is created on the end-user computer and must be provided by
the end user. There might be multiple IP addresses to choose from, depending
on how many are available on the end-user computer.
9. Click Connect.
The IT administrator now assumes control of the end-user computer and can run the DaRT
tools remotely.
Note
A file is provided that is named inv32.xml and contains remote connection
information, such as the port number and IP address. By default, the file is typically
located at %windir%system32.
 You can customize the Remote Connection process by editing the winpeshl.ini file. For
more information about how to edit the winpeshl.ini file, see Winpeshl.ini Files.
Specify the following commands and parameters to customize how a remote connection
is established with an end-user computer:
Command Parameter Description
RemoteRecovery.exe -nomessage Specifies that the confirmation
prompt is not displayed.
To customize the Remote Connection process

34
Remote Connection continues
just as if the end user had
responded "Yes" to the
confirmation prompt.
WaitForConnection.exe none Prevents a custom script from
continuing until either Remote
Connection is not running or a
valid connection is established
with the end-user computer.
Important
This command
serves no function
if it is specified
independently. It
must be specified
in a script to
function correctly.
 The following is an example of a winpeshl.ini file that is customized to open the Remote
Connection tool as soon as an attempt is made to boot into DaRT:
[LaunchApps]
"%windir%system32netstart.exe -network -remount"
"cmd /C start %windir%system32RemoteRecovery.exe -
nomessage"
"%windir%system32WaitForConnection.exe"
"%SYSTEMDRIVE%sourcesrecoveryrecenv.exe"
 You can run the DaRT Remote Connection Viewer at the command prompt by
specifying the DartRemoteViewer.exe command and by using the following parameters:
Parameter Description
-ticket=<ticketnumber> Where <ticketnumber> is the ticket
number, including the dashes, that is
generated by Remote Connection.
-ipaddress=<ipaddress> Where <ipaddress> is the IP address that
is generated by Remote Connection.
To run the Remote Connection Viewer at the command prompt

35
-port=<port> Where <port> is the port that corresponds
to the specified IP address.
Note
The variables for these parameters are created on the end-user computer and
must be provided by the end user.
 If all three parameters are specified and the data is valid, a connection is immediately
tried when the program starts. If any parameter is not valid, the program starts as if there
were no parameters specified.
Diagnosing System Failures with Crash Analyzer
The Crash Analyzer in Microsoft Diagnostics and Recovery Toolset (DaRT) 7 lets you debug a
crash dump file on a Windows-based computer and then diagnose any related computer errors.
The Crash Analyzer uses the Microsoft Debugging Tools for Windows to examine a crash dump
file for the driver that caused the computer to fail.
Run the Crash Analyzer on an End-user Computer
Typically, you run Crash Analyzer from the Diagnostics and Recovery Toolset window on an end-
user computer that has problems. The Crash Analyzer tries to locate the Debugging Tools for
Windows on the problem computer. If the directory path dialog box is empty, you must enter the
location or browse to the location of the Debugging Tools for Windows (you can download the
files from Microsoft). You must also provide a path to where the symbol files are located.
If you included the Microsoft Debugging Tools for Windows and the symbol files when you
created the DaRT recovery image, they should be available when you run the Crash Analyzer on
the problem computer.
How to Run the Crash Analyzer on an End-user Computer
Run the Crash Analyzer in stand-alone mode on a computer other than an
end-user computer
The Crash Analyzer tries to locate the Debugging Tools for Windows on the problem computer. If
the directory path dialog box is empty, you must enter the location or browse to the location of the
Debugging Tools for Windows (you can download the files from Microsoft). You must also provide
a path to where the symbol files are located.
If you did not include the Microsoft Debugging Tools for Windows and the symbol files when you
created the DaRT recovery image, or if disk size or network connectivity problems are preventing
you from obtaining them, then you can copy the dump file from the problem computer and
analyze it on a computer that has the stand-alone version of Crash Analyzer installed, such as a
helpdesk administrator’s computer.
How to Run the Crash Analyzer in Stand-alone Mode on a Computer Other than an End-user
Computer

36
Ensure that Crash Analyzer can access symbol files
Typically, debugging information is stored in a symbol file that is separate from the executable.
You must have access to the symbol information when you debug an application that has
stopped responding, for example if it crashed.
Symbol files are automatically downloaded when you run Crash Analyzer. If the computer does
not have an Internet connection or the network requires the computer to access an HTTP proxy
server, the symbol files cannot be downloaded.
How to Ensure that Crash Analyzer Can Access Symbol Files
How to Run the Crash Analyzer on an End-user Computer
Typically, you run Microsoft Diagnostics and Recovery Toolset (DaRT) 7 Crash Analyzer from the
Diagnostics and Recovery Toolset window on an end-user computer that has problems. The
Crash Analyzer tries to locate the Debugging Tools for Windows on the problem computer. If the
directory path dialog box is empty, you must enter the location or browse to the location of the
Debugging Tools for Windows (you can download the files from Microsoft). You must also provide
a path to where the symbol files are located.
1. On the Diagnostics and Recovery Toolset window on an end-user computer, click
Crash Analyzer.
2. Provide the required information for the following:
 Microsoft Debugging Tools for Windows
 Symbol files
For more information about symbol files, see How to Ensure that Crash Analyzer Can
Access Symbol Files.
 A crash dump file
Follow these steps to determine the location of the crash dump file:
i. Open the System Properties window.
Click Start, type sysdm.cpl, and then press Enter.
ii. Click the Advanced tab.
iii. In the Startup and Recovery area, click Settings.
Note
If you do not have access to the System Properties window, you can search
for dump files on the end-user computer by using the Search tool in DaRT.
3. The Crash Analyzer scans the crash dump file and reports a probable cause of the
crash. You can view more information about the crash, such as the specific crash
message and description, the drivers loaded at the time of the crash, and the full output
of the analysis.
To open and run the Crash Analyzer on an end-user computer

37
4. Decide upon an appropriate strategy to resolve the problem. This may require disabling
or updating the device driver that caused the crash by using the Services and Drivers
node of the Computer Management tool in DaRT.
How to Run the Crash Analyzer in Stand-alone Mode on a Computer Other
than an End-user Computer
If you cannot access the Microsoft Debugging Tools for Windows or the symbol files on the end-
user computer, you can copy the dump file from the problem computer and analyze it on a
computer that has the stand-alone version of Crash Analyzer installed, such as a helpdesk
administrator’s computer.
1. On a computer with DaRT 7 installed, click Start / All Programs / Microsoft DaRT 7.
2. Provide the required information for the following:
 Microsoft Debugging Tools for Windows
 Symbol files
For more information about symbol files, see How to Ensure that Crash Analyzer Can
Access Symbol Files .
 A crash dump file
Note
Use the Search tool in DaRT 7 to locate the copied crash dump file.
3. The Crash Analyzer scans the crash dump file and reports a probable cause of the
crash. You can view more information about the crash, such as the specific crash
message and description, the drivers loaded at the time of the crash, and the full output
of the analysis.
4. Decide upon an appropriate strategy to resolve the problem. This may require disabling
or updating the device driver that caused the crash by using the Services and Drivers
node of the Computer Management tool in DaRT.
How to Ensure that Crash Analyzer Can Access Symbol Files
Symbol files are automatically downloaded when you run the Microsoft Diagnostics and Recovery
Toolset (DaRT) 7 Crash Analyzer. If the computer does not have an Internet connection or the
network requires the computer to access an HTTP proxy server, the symbol files cannot be
downloaded.
To run the Crash Analyzer in stand-alone mode

38
Ensure access to symbol files
Symbol files are automatically downloaded when you run Crash Analyzer. If the computer does
not have an Internet connection or the network requires the computer to access an HTTP proxy
server, the symbol files cannot be downloaded.
The following is a list of options that are available for guaranteeing access to symbol files:
 Copy the dump file to another computer. If the symbols cannot be downloaded because of
a lack of an Internet connection, copy the crash dump file to a computer that does have an
Internet connection and run the stand-alone Crash Analyzer Wizard on that computer.
 Access the symbol files from another computer. If the symbols cannot be downloaded
because of a lack of an Internet connection, you can download the symbols from a computer
that does have an Internet connection and then copy them to the computer that does not
have an Internet connection, or you can map a network drive to a location where the symbols
are available on the local network. If you run the Crash Analyzer in a Windows Recovery
Environment (Windows RE), you can include the symbol files on the DaRT recovery image.
For more information about how to create a recovery image, see Creating the DaRT 7.0
Recovery Image.
 Access symbol files through an HTTP proxy server. If the symbols cannot be downloaded
because an HTTP proxy server must be accessed, use the following steps to access an
HTTP proxy server. In DaRT 7, the Crash Analyzer Wizard has a setting available on the
Specify Symbol Files Location dialog page, marked with the label Proxy server (optional,
using the format "server:port"). You can use this text box to specify a proxy server. Enter
the proxy address in the form <hostname>:<port>, where the <hostname> is a DNS name
or IP address, and the <port> is a TCP port number, usually 80. There are two modes in
which the Crash Analyzer can be run. Following is how you use the proxy setting in each of
these modes:
 Online mode: In this mode, if the proxy server field is left blank, the wizard uses the
proxy settings from Internet Options in Control Panel. If you enter a proxy address in the
text box which is provided, that address will be used, and it will override the setting in the
Internet Options.
 Windows Recovery Environment (Windows RE): When you run Crash Analyzer from
the Diagnostics and Recovery Toolset window, there is no default proxy address. If the
computer is directly connected to the Internet, a proxy address is not required. Therefore,
you can leave this field blank in the wizard setting. If the computer is not directly
connected to the Internet, and it is in a network environment that has a proxy server, you
must set the proxy field in the wizard to access the symbol store. The proxy address can
be obtained from the network administrator. Setting the proxy server is important only
when the public symbol store is connected to the Internet. If the symbols are already on
the DaRT recovery image, or if they are available locally, setting the proxy server is not
required.

39
Security Considerations for DaRT 7.0
Microsoft Diagnostics and Recovery Toolset (DaRT) 7 includes functionality that lets an
administrator run the DaRT tools remotely to resolve problems on an end-user computer. In
earlier releases of DaRT, a help desk technician or administrator had to physically be at an end-
user computer and boot into DaRT by using the CD or DVD that included the DaRT recovery
image. Now, the help desk technician or administrator can perform the same procedures
remotely.
Also in DaRT 7, in addition to burning a CD or DVD, you are now able to save the International
Organization for Standardization (ISO) image to a USB flash drive. You can also put the ISO
image on a network or include its contents as a recovery partition on a computer hard disk.
The Remote Connection feature in DaRT 7 lets end users access DaRT by using one of these
new deployment methods. Therefore, they can more easily start DaRT and access the DaRT
tools.
The new functionalities in DaRT 7 provide much more flexibility in how you use DaRT in your
enterprise. However, they also create their own set of security issues that must be addressed.
We recommend that you consider the following security tips when you configure DaRT.
To help maintain security when you create the DaRT recovery image
When you are creating the DaRT recovery image, you can select the tools that you want to
include. For security reasons, you might want to restrict end-user access to the more powerful
DaRT tools, such as Disk Wipe and Locksmith. In DaRT 7, you can disable certain tools during
configuration and still make them available to helpdesk agents when the end user starts the
Remote Connection feature.
You can even configure the DaRT image so that the option to start a remote connection session
is the only tool available to an end user.
After the remote connection is established, all the tools that you included in the recovery
image, including those unavailable to the end user, will become available to the helpdesk
agent working on the end–user computer.
For more information about including tools in the DaRT recovery image, see How to Use the
DaRT Recovery Image Wizard to Create the Recovery Image.
To help maintain security by encrypting the DaRT recovery image
If you use one of the deployment options new in DaRT 7, for example, saving to a USB flash
drive or creating a remote partition or a recovery partition, you can include your company’s
preferred method of drive encryption on the ISO. This will help make sure that an end user cannot
use the functionality of DaRT should they gain access to the recovery image. And it will also
make sure that unauthorized users cannot boot into DaRT on computers that belong to someone
else.
Your encryption method should be deployed and enabled in all computers.
Important

40
DaRT 7 supports BitLocker natively.
To help maintain security between two computers during Remote
Connection
By default, the communication between two computers that have established a Remote
Connection session may not be encrypted. Therefore, to help maintain security between the two
computers, we recommend that both computers are a part of the same network.
Troubleshooting DaRT 7.0
Troubleshooting content is not included in the Administrator’s Guide for this product. Instead, you
can find troubleshooting information for this product on the TechNet Wiki.
How to Find Troubleshooting Content
You can use the following information to find troubleshooting or additional technical content for
this product.
Search the MDOP Documentation
The first step to find help content in the Administrator’s Guide is to search the MDOP
documentation on TechNet.
After you search the MDOP documentation, your next step would be to search the
troubleshooting information for the product in the TechNet Wiki.
1. Use a web browser to navigate to the MDOP Information Experience TechNet home
page.
2. Enter applicable search terms in the Search TechNet with Bing search box at the top of
the MDOP Information Experience home page.
3. Review the search results for assistance.
1. Use a web browser to navigate to the TechNet Wiki home page.
2. Enter applicable search terms in the Search TechNet Wiki search box on the TechNet
Wiki home page.
3. Review the search results for assistance.
Note
To search the MDOP product documentation
To search the TechNet Wiki

41
How to Create a Troubleshooting Article
If you have a troubleshooting tip or a best practice to share that is not already included in the
MDOP OnlineHelp or TechNet Wiki, you can create your own TechNet Wiki articles.
1. Use a web browser to navigate to the TechNet Wiki home page.
2. Log in with your Windows Live ID.
3. Review the Getting Started section to learn the basics of the TechNet Wiki and its
articles.
4. Select Post an article >> at the bottom of the Getting Started section.
5. On the Wiki article Add Page page, select Insert Template from the toolbar, select the
troubleshooting article template (Troubleshooting.html), and then click Insert.
6. Be sure to give the article a descriptive title and then overwrite the template information
as needed to create your troubleshooting or best practice article.
7. After you review your article, be sure to include a tag that is named Troubleshooting
and another for the product name. This helps others to find your content.
8. Click Save to publish the article to the TechNet Wiki.
To create a TechNet Wiki troubleshooting or best practices article

Agm diagnostics and_recovery_toolset_(da_rt)_7

More Related Content

What's hot (20)

Similar to Agm diagnostics and_recovery_toolset_(da_rt)_7 (20)

More from Steve Xu (20)

Recently uploaded (20)

Agm diagnostics and_recovery_toolset_(da_rt)_7