Alfred Sullivan Resume

Alfred Sullivan Resume

• 1.
  ALFRED SULLIVAN 18941 PatilloRoad  Mount Vernon, Alabama 36560-3027 [email protected]  Main (251) 623-6240/Alternate (251) 581-1023 Certified Welding Inspector (CWI# 13120211) Experienced, goal-oriented, dedicated and disciplined team player with demonstrated experience and extensive knowledge of the Process Piping, Coded Vessels, Combined Cycles, Boilers, Reformers, Piping, Structural and Maritime Fabrication. Proven expertise in marine fabrication shops, ship yards, refineries, power plants and floating oil rigs in the Gulf of Mexico. Seeking an employment opportunity with GHD to further my growth in the field of Quality Management and Engineering. Core competencies and certifications include:  Certified Welding Inspector  Code Interpretation  Procedure Writing  Flux Core Welding  Field Eng. & Problem-solving  GTAW Welding  Blue Print Reading & Drafting  Non-Destructive Examination  Document Control  SMAW Welding  Quality Control/Quality Assurance Inspecting CERTIFICATIONS AND EDUCATION  American Welding Society - 12/2013 – 12/2016 Certified Welding Inspector – CWI# 13120211  Ashford University – Mobile, AL 05/2010 – 12/2012 Bachelor of Science - Engineering, Human Resources (On-line)  University of Phoenix – Phoenix, AZ 01/2002 – 05/2005 Bachelor of Science - Blue Print and Management (On-line)  Delgado Community College – New Orleans, LA 01/2004 – 05/2005 Associates Degree – Drafting and Metallurgy CAREER EXPERIENCE LAUREN ENGINEERS & CONSTRUCTORS – Donaldsonville, LA 04/2015 - Present Certified Welding Inspector/Quality Control Manager (Night Shift)  Managed the day-to-day activities of the night shift Quality Department and two inspectors.  Coordinated with the Site Quality Control Manager to advice of any problems and ensure continuity in operations from the day shift to the night shift.  Conducted Welder Orientation for new welders hiring in on the night shift.  Maintained and issued weld stencils for all welders, also managed the night shift Rod Control Program ensuring that the correct filler metal was ordered, issued and used.  Scheduled and monitored Pre-heat, Post Weld Heat Treatment and all third party non- destructive (NDE) testing also developed and maintained ITP’s and WPS’s.  Performed high level oversight of the work product of 40 Foremen and 12 General Foremen providing solutions to assignment and procedure issues as they arose; also acted as assistant site engineer for the night shift and Performed weld mapping of new ISOs to be issued to the field.
• 2.
  ALFRED SULLIVAN 18941 PatilloRoad  Mount Vernon, Alabama 36560-3027 [email protected]  Main (251) 623-6240/Alternate (251) 581-1023 2  Assisted the production team in producing 7,000 plus welds and installing approximately 16,000 linear feet of structural steel and 32,000 linear feet of pipe ranging from 1 inch to 52 inches in diameter and varying base metals including: carbon and stainless steel, as well as, P91 chrome. KILLIC GROUP—Mobile, AL 06/2014 – 04/2015 Area QA/QC Inspector  Monitored completed structural equipment and its shipping.  Verified design, metallurgy and filler material requirements for compliance with vendors.  Documented coatings on boiler screens.  Inspected subcontractors’ welds and documented inspections. YATES CONSTRUCTION INC. – Meridian, MS 04/2013 – 05/2014 Quality Control/Quality Assurance Inspector  Administered welder qualification testing in the areas of instruction, proctoring, fit-up, root pass and final inspections, as well as oversight of bend test specimen preparations and inspection of test specimens.  Prepared Welder Performance Qualification Records (WPQR’s).  Performed inspections of bolting, equipment installation and alignment, piping and piping supports, as well as, structural.  Performed mechanical preventive maintenance and documented maintenance activities. AUSTAL INC. – Mobile, AL 10/2012 – 04/2013 Welder/Fitter  Conducted the installation of new aluminum structures and pipe.  Worked with Field Engineers to produce practical solutions to engineering flaws that would fall under the Navy’s Code and Standards for ship building.  Conducted first stage inspections on finished units and coordinated with Foremen to correct deficiencies and ensure all components and deviations were installed properly. CTR CORPORATION – Mobile, AL 07/2012 – 10/2012 Welder/Fitter/Inspector  Performed welds and fitting to design specifications.  Provided supervision to subordinates ensuring compliance with guidelines set forth by CTR.  Completed initial inspections on all products produced.  Generated punch lists and coordinated the correction of all deficiencies.
• 3.
  ALFRED SULLIVAN 18941 PatilloRoad  Mount Vernon, Alabama 36560-3027 [email protected]  Main (251) 623-6240/Alternate (251) 581-1023 3 OFFSHORE INLAND – Mobile, AL 03/2012 – 10/2012 Welding Inspector  Acted in the role of Production Manager for the fabrication shop and oversaw the Job Safety Analysis (JSA) program, also inspected all shop welds and fitting.  Coordinated with third party vendors to ensure all external parts installed on Offshore Inland products met standards. DODI – Houston, TX 03/2005 – 03/2012 Rig Welder/Fitter  Fit and welded safety railing and plating as well as, all components on Drilling Rigs.  Ensured safety and productivity by bringing outdated rigs up to-date in accordance with coast guard certifications.  Oversaw the daily operations of the Pipe Department and the work product of third party welders and fitters ensuring timely task completion.  Generated work requests for all structural and pipe alterations on the rig.  Fabricated maritime equipping into place from air tuggers to offshore anchors for drillings rigs. UNITED STATES MARINE CORPS – Pensacola, FL 07/2001 – 07/2011 Sergeant/ Admin Chief and Weapons Instructor  Provided Weapons Instruction to over 300 Marines, with live ammunition and achieved perfect qualification with no mishaps, injuries or negligent discharges.  Responsible for reviewing Marines during the Quarter and Writing Proficiency and Conduct Marks for all.  Completed military courses including Marine Corps Engineering, Military field welding and Marine Corp order writing, as well as the Microsoft Office Suite software. CHARACTER REFERENCES  Toma Back, Safety Coordinator – (251) 455-8822  Dan Fagan, Regional Manager – (251) 508-7546  Shane Sullivan, Shift Maintenance Manager – (251) 622-2574