AN APPLICATION OF PHYSICS EXPERIMENTS OF HIGH SCHOOL BY USING AUGMENTED REALITY

International Journal of Software Engineering & Applications (IJSEA), Vol.11, No.1, January 2020
DOI: 10.5121/ijsea.2020.11103 37
AN APPLICATION OF PHYSICS EXPERIMENTS OF
HIGH SCHOOL BY USING AUGMENTED REALITY
Hussain Mohammed Abu-Dalbouh, Samah Mohammed AlSulaim, Shaden
Abdulaziz AlDera, Shahd Ebrahim Alqaan, Leen Muteb Alharbi and Maha
Abdullah AlKeraida
Qassim University, Computer Science Department, College of Sciences and Arts in
Unaizah, Qassim, Kingdom of Saudi Arabia
ABSTRACT
There has been done little research to validate the utility and usability of virtual and augmented reality
environments. The evaluation of usability of these new technologies is very important to design systems that
are more intuitive than a traditional method. Such an evaluation is also important for future development
of applications that can gain from this new technology. The augmented reality (AR) is a technology that
embedded virtual object (video, picture and 3D object) to the user view the real world. The combination of
AR technology with the educational content creates new type of automated applications and acts to
enhance the effectiveness and attractiveness of teaching and learning for students in real life scenarios. The
study aims to improve the teaching methods used in secondary school by employing modern educational
technology and thus assess the effectiveness of AR apps in teaching students the physics experiments.
Therefore, in this study we took the challenge of adapting this technology to facilitate physics subject in
secondary school.
KEYWORDS
Augmented Reality, Physics, Education, System, Students, Teachers, Technology, Mobile, Lab, Virtual
Reality
1. INTRODUCTION
Inundating students to genuine world and cooperate them with that world generally cannot be
helpful. In spite of the fact that the regular world is three- dimensional, we want to utilize two-
dimensional media in training which is exceptionally advantageous, natural, adaptable, versatile
and economical. However, it is static and does not offer the dynamic substance. Then again
computer produced three-dimensional virtual condition can be utilized yet these scenes requires
elite computer illustrations which is more costly than others.
Even though bunches of chances virtual universes may display for educating and learning, it is
difficult to give a sufficient dimension of authenticity. At the point when clients are totally
submerged in this condition they wind up separated from the genuine condition. In this way, it
gives you virtual things by displaying this present reality you are encountering. Successful and
prosperous societies are one of the most powerful and dominant societies in this world. For a
society to be strong and developed, it should be based on several elements, most notably science
and education. Without knowing what human societies have developed, flourished and reached
what it is today. But we as human may have difficulty in understanding some things, especially as
students, we find difficult to understand a lot of things in our study, one of them is the scientific
experiments in scientific material such as biology, physics and chemistry, especially physics the
scope of this study.

38
You may have difficult understand the experiments written in the book, and you may not have the
ability to experience and see, and since we as a human, our eyes eager for visual information and
the brain accepted it faster and more established than the written information.
Today has ever-expanding applications such as science, education, engineering, interactive,
multimedia, medicine. Visualization through visual images is an effective way to deliver the
idea in an easy simple way and more established in the brain.
Nowadays, visualization is a part of the education and people enjoy more with visual data.
Richard Hamming said: "The purpose of computing is insight, not numbers". According to
Charles and Chris (2005) the goal of visualization is leverage existing scientific methods by
providing new scientific insight through visual methods. We will use a technology that will give
the ability to see the physical experience at any time and any place with your own phone in a
particular application.
Imagine a technology with which you could see more than others see, hear more than others here.
It is a technology to perceive completely computational elements. It also objects within our real-
world experience, entire creatures and structures even that helps us in our daily activities, with
such technology:
• Mechanics could see instructions what to do next when repairing an unknown piece of
Equipment.
• Surgeons could see ultrasound scans of organs while performing surgery on them.
• Fire fighters could see building layouts to avoid otherwise invisible hazards [1].
Therefore, what all the students need, is seeing the experiment done in front of them as a video or
as a (3D) object, this will make the understanding of the hard physics experiments easier. This
technology is called augmented reality (AR), which can be applied to computers, tablets, and
smartphones. AR affords the ability to overlay images, text, video, and audio components onto
existing images or space. Research on AR has also demonstrated its extreme usefulness for
increasing the student motivation in the learning process [2-6].
AR has already begun to help students learn more efficiently as well as increase their knowledge
retention [7]. However, before AR becomes mainstream in education, like desktops, laptops,
tablets, and even cell phones have become, special consideration must be taken into account on
the usability, cost, power usage, visual appearance and the like, in order for content AR
simulations activities to become part of the regular academic curriculum [8]. This study aims to
explain the augmented reality (AR) is given about this new artificial and augmented environment.
It also to develop a mobile application system that recognizes the experience picture in the book
and feedback with a video or a 3D object of the experience.
2. PROBLEM OF THE STUDY
The learning procedure is as yet restricted to customary techniques and the instructor's
watchfulness in the introduction of data. Current practices in instruction don't misuse the
numerous sorts of present day ICT apparatuses, applications, and administrations, nor do they
convey data to the understudy in a solid structure that is near the truth in which he/she lives.
Despite the fact that the instruction of students at this stage requires instructing techniques that
attention on utilization of the faculties and incorporation in the learning procedure [9], the
utilization of ICT devices, applications, and administrations at the school organize is low
contrasted with customary strategies. This issue can be tended to through the presentation of AR
innovation into the school understudy's instructing and learning condition and utilizing it
properly, with the goal that the educating and learning forms end up fun and useful while
additionally accomplishing their ideal objectives.

39
Hence, it is important to move the customary arrangement for displaying data to an AR approach.
This methodology is described by anticipation and fun, and it attempts to solidify the displayed
data in the understudy's brain. AR innovation may give a chance to the understudy, as indicated
by his/her capacities, to create mental and psychological abilities that are not empowered by
customary strategies. In like manner, this examination looked to find out about the viability of AR
applications for educating and learning the material science subject in optional school in the State
of Saudi.
3. OBJECTIVES OF THE STUDY
In the current study, the researchers introduce a new teaching method presenting information
using modern technology and to determine the extent to which the student interacts with AR
software. The researchers aim to improve the teaching methods used in secondary school by
employing modern educational technology and thus assess the effectiveness of AR apps in
teaching students the physics experiments. Finally, the researchers offer proposals and
recommendations based on the results regarding the use of AR apps for teaching and learning.
4. LITERATURE REVIEW
Augmented reality (AR) is a live direct or indirect view of a physical, real-world environment
whose elements are "augmented" by computer-generated or extracted real-world sensory input
such as sound, video, graphics or GPS data. It is related to a more general concept called
computer-mediated reality, in which a view of reality is modified (possibly even diminished
rather than augmented) by a computer. Augmented reality enhances one’s current perception of
reality, whereas, in contrast, virtual reality replaces the real world with a simulated one [10]. With
the help of advanced AR technology (e.g. adding computer vision and object recognition) the
information about the surrounding real world of the user becomes interactive and digitally
manipulable. Information about the environment and its objects is overlaid on the real world. This
information can be virtual or real, e.g. seeing other real sensed or measured information such as
electromagnetic radio waves overlaid in exact alignment with where they actually are in space
[11, 12]. Augmented reality brings out the components of the digital world into a person's
perceived real world. One example is an AR Helmet for construction workers, which display
information about the construction sites. The first functional AR systems that provided immersive
mixed reality experiences for users were invented in the early 1990s, starting with the Virtual
Fixtures system developed at the U.S. Air Force's Armstrong Labs in 1992.
4.1. Application of Augmented Reality
Augmented Reality enhances a user’s perception of and interaction with the real world. The
virtual objects display information that the user cannot directly detect with his own senses. The
information conveyed by the virtual objects helps a user perform real-world tasks. AR is a
specific example of what Fred Brooks called Intelligence Amplification (IA): using the computer
as a tool to make a task easier for a human to perform [13]. As computers increase in power and
decrease in size, new mobile, wearable, and pervasive computing applications are rapidly
becoming feasible, providing people access to online resources always and everywhere [14]. This
new flexibility makes a possible new class of applications that exploit the person’s surrounding
context [15]. Augmented reality has already presented a particularly powerful user interface (UI)
to context-aware computing environments. AR systems integrate virtual information into a
person’s physical environment so that he or she will perceive that information as existing in their
surroundings [16]. Mobile augmented reality systems provide this service without constraining
the individual’s whereabouts to a specially equipped area [17]. Augmented reality has many
applications. First used for military, industrial, and medical applications, by 2012 its use
expanded into the entertainment and other commercial industries [18].

40
4.1.1 Medical
Medical augmented reality takes its main motivation from the need of visualizing medical data
and the patient within the same physical space. This would require real-time in-situ visualization
of co- registered heterogeneous data and was probably the goal of many medical augmented
reality solutions proposed in the literature (Figure 1). In 1968, Sutherland [19]. Suggested a
tracked head-mounted display as a novel human-computer interface enabling viewpoint-
dependent visualization of virtual objects. It was only two decades later when Roberts et al.
implemented the first medical augmented reality system [20].
4.1.2 Education
Augmented Reality innovation is certainly not another issue. It has been utilized in fields, for
example, military; medication; building plan; automated; tele-robotic; assembling, upkeep and fix
applications; customerstructure; mental medicines, and so forth [21]. Showing data by utilizing
virtual things that the client can't straightforwardly identify with his very own faculties can
empower an individual to interface with this present reality in courses at no other time
conceivable. We can change the position, shape, as well as other graphical highlights of virtual
items with cooperation procedures increased reality underpins. Utilizing our fingers or
movements of handheld gadgets, for example, shake and tilt we have a capacity to control virtual
items, and additionally to physical articles in reality.
New possibilities for teaching and learning provided by AR have been increasingly recognized by
educational researchers. The coexistence of virtual objects and real environments allows learners
to visualize complex spatial relationships and abstract concepts [22]. Experience phenomena that
is not possible in the real world [23], interact with two and three-dimensional synthetic objects in
the mixed reality [24], and develop important practices that cannot be developed and enacted in
other technology- enhanced learning environments [25]. These educational benefits have made
AR one of the key emerging technologies for education over the next five years [26].
Augmented Reality can be connected for learning, stimulation, or edutainment by improving a
client's impression of and collaboration with this present reality. Client can move around the
three-dimensional virtual picture and view it from any vantage point, much the same as a genuine
article. The data passed on by the virtual articles enables clients to perform certifiable
undertakings. Substantial Interface Metaphor is one of the critical method to enhance learning.
This property empowers control of three- dimensional virtual items essentially by moving
genuine cards without mouse or console.
Augmented Reality can likewise be utilized to improve shared assignments. It is conceivable to
create inventive PC interfaces that consolidate virtual and genuine universes to improve eye to
eye and remote coordinated effort. These enlarged reality applications are increasingly like
common up close and personal cooperation than to screen based joint effort [27].
Web innovations and web are well known, as a handy circumstance individuals still incline
toward perusing books as opposed to confronting screens and reading material are still generally
utilized. Another intriguing utilization of this innovation is in increased reality course books.
These books are printed typically however indicate a webcam the book brings perceptions and
associations planned. This is conceivable by introducing exceptional programming on a
computer, utilizing extraordinary versatile applications or a site. This innovation enables any
current book to be produced into an increased reality version after distribution. Utilizing 3D
articles and sees, random and inventive media, recreations with various kinds of associations is
the most straightforward methods for interfacing the two disconnected universes. Using
Augmented Reality in printed book pages, reading material will wound up powerful wellsprings
of data. Along these lines individuals with no computer foundation can in any case have a rich
intuitive ordeal.

41
4.1.3 Video Games
The gaming industry embraced AR technology. A number of games were developed for prepared
indoor environments, such as AR air hockey, Titans of Space, collaborative combat against
virtual enemies, and AR- enhanced pool table games [28]. Augmented reality allowed video game
players to experience digital gameplay in a real-world environment. Companies andplatforms like
Niantic and LyteShot emerged as major augmented reality gaming creators. EyeToy, PlayStation
Eye, Kinect, Nintendo 3DS, PlayStation Portable, PlayStation Vita and some mobile devices, are
examples of (AR Games) that use cameras to augment computer graphics onto live footage. The
majority of AR software uses special cards which are read by the device to pinpoint where the
graphics will form [29].
5. DESIGN AND DEVELOPMENT OF MYLAB
[30-32] discussed the functionality of the mobile tracking on patient progress system by using use
case diagram. [33 and 34] discussed (Mobile Tracking on Patient Progress System-UML
example), the study was covering aspects of mobility at the various views and diagrams of UML.
[35]Is describing the extensions made in each of the UML diagrams, to allow the explicit
representation of the proposed system. Then, modifications to the UML. [36] Is describing the
functionality of the Electronic Health Record system by using use case diagram.
The proposed application is designed and implemented to view the required experience as a video
or 3D model by recognizing a specific paper from the book. Therefore, Figure 2 shows the
interaction between the user and the system. When the user clicks on the application it will
display the main page with three buttons (Scan, Guide and About us) and the user can select one
of them. The Scan button will move him to a page on which he/she chooses a Physics course,
after that he/she will choose the level.
Figure 2.Use Case Diagram for Mylab application (Figure 1 shows that proposed Mylab application have
many cases and some cases extended to other case)

42
The following snapshots explain the Mylab application
Figure 3. Application Logo
Figure 4. Application at Home Screen
Figure 5. Main System Page (When user open (Mylab) application, will appear this screen then disappear
automatically)

43
Figure 6. Mylab Buttons (User can choose over three screens, scan, guide and about us. 1. Scan: to start
scan the book. 2. Guide: to know how to use this application and 3. About us contains some information
about programmers.
Figure 7. Guide Page (Guide page displays for user how to use (Mylab) application)

44
Figure 8. About us Page
Figure 9. Course (When user clicks on (scan) will move to course, then user clicks on physics)

45
Figure 10. Physics Level (User clicks on his/her level)
Figure 11.Scan Page (After user choose his level, will open camera to start scan by put device in front of
page and interact with camera, the video will show if is exists (Figure 11 A) and nothing will happen if not
exist (figure 11 B). If user clicks left arrow will move to previous screen)
6. RESULT AND DISCUSSION
Despite these positive AR content-creation experiences, an important question remains: Does AR
technology increase learning? Building and using AR scenes combines active complex problem
solving and teamwork to create engaging educational experiences to teach science, math or
language skills, and studies have found that this activity enhances student motivation,
involvement, and engagement. However, what is the real education benefit from using this

46
technology in the classroom? Answering this question can be challenging because education
quality stems from many factors, some of which are hard to quantify.
Most educational AR systems are single-use prototypes for specific projects, so it is difficult to
generalize evaluation results. Overall, augmented books are promising educational tools, both in
the laboratory and real classroom settings. They can enhance learning with print-only books or
traditional interfaces by offering novel ways to experience educational content. The intuitive
interaction possibilities and spatial visualization of 3D content that augmented physics
experiments afford seem to be beneficial for learning. AR can also add more meaning to topics
that students cannot possibly experience in the real world.
The results of our study show that AR seems to particularly benefit students who struggle in
traditional text-based learning environments. Our results support earlier research that reveals the
role of multimodality and interactivity in increasing engagement and immersion and in general
learning support. Some researchers argue that interactivity can promote learning by activating
certain cognitive processes. Interactivity can activate knowledge stored in long-term memory and
cause the brain to integrate it with incoming information. Students who interact with the content
can remember more than students who receive information only passively and better transfer what
they have learned to new problems.
AR use in the classroom is still relatively new, but the technology’s impact is increasing as AR
platforms become more widely available. Current AR experiences have focused only on visually
enhancing the real world, but they have established several key ideas about AR use in the
classroom:
 AR technology is robust enough to deliver learning experiences, especially in augmented
books and mobile AR applications;
 AR experiences should complement rather than replace traditional curriculum material;
 Valuable learning occurs during the development of AR content as well as in using the
AR application itself; and
 AR provides real benefit for reading comprehension and in understanding spatial data,
especially for those with low reading ability. As AR use broadens, however, the
education model is likely to be quite different for students who have AR-ready mobile
phones in their pockets and easy-to-use content tools at hand.
Therefore to evaluate the application according to its idea and the design of the screens, we
distributed a questionnaire. Respondent consisted of 30, Physics Teachers and Students that were
selected through convenience sampling. The aim of this evaluation is to discuss the results of the
usability test conducted on the Mylab application. Usability test is one of the most fundamental
methods in usability evaluation. The students and Physics Teachers have been asked to use the
application for the purpose of testing. The respondents were asked to evaluate the prototype while
doing the test tasks. Interviews and observations were used in order to gain more insight into the
user’s actions with the interface.
The findings of this research study are coherent and in compliance with the results of other
studies, the finding show that the students by using the (Mylab) will Increased Motivation,
Increased Attention, Increased Concentration and Increased Satisfaction. It is also, obvious that
younger generation prefers technology intervened learning rather than conventional learning.
This is an auxiliary learning tool for upper secondary school students. The aim of this Mobile AR
app for Physics experiment (Mylab) is to provide rigorous information beyond conventional
experiment practices and additional learning materials.

47
7. CONCLUSION
Professionals and researchers have striven to apply AR to classroom-based learning within
subjects like chemistry, mathematics, biology, physics, astronomy, and to adopt it into augmented
books and student guides. Estimated that AR has not been much adopted into academic settings
due to little financial support from the government and lack of the awareness of needs for AR in
academic settings. By augmenting the real world with virtual information, Augmented Reality
(AR) provides new possibilities for education. AR is qualified to be utilized in instructive
conditions and we distinguished numerous applications effectively applying AR to enhance
learning: dialect training, preparing of mechanical aptitudes, and spatial capacities preparing. By
and by, AR ought not be viewed as an enchantment slug in instructive conditions. Every AR
application is in its own specific manner one of a kind and in this manner the recognized
advantages may not have any significant bearing in every unique situation. Every application
must be actualized completely to forestall downsides in client communication or framework
disappointments so as to benefit from advantages. AR allows flexibility in use that is attractive
AR technology can be utilized through a variety of mediums including desktops, mobile devices,
and smart phones. The technology is portable and adaptable to a variety of scenarios. AR can be
used to enhance content and instruction within the traditional classroom, supplement instruction
in the special education classroom, extend content into the world outside the classroom, and be
combined with other technologies to enrich their individual applications. The MyLab Application
run on IOS systems allows the students of viewing the scientific experience at any time and in
any place using the application, it support the education and make the studying more fun and
easier for better understanding. This study presented the effects of AR use in physics experiments
and training on student achievement and self-efficacy. As a result, it can be stated that the
applications developed with AR technology can be used as effective tools in applied courses.
Considering the results obtained in this study, following suggestions are offered to guide
researchers and application developers in future AR studies:
It was concluded in the study that AR use increased student achievement. Based on this point,
new studies can be planned in different fields and by using different sample levels.
Student' smart phones were used in this study. Although no problems were experienced in the use
of these devices, due to their nature, they have limitations based on small screen sizes. Therefore,
more appropriate devices for applications such as AR goggles can be used in future studies by
receiving necessary support from related institutions.
The study was carried out with secondary School. Similar studies can be carried out with different
sample groups in universities, institutions in which applied teaching is extensively used.
REFERENCES
[1] D.W.F. van Krevelen and R. Poelman, "A Survey of Augmented Reality Technologies, Applications
and Limitations", 2010, http://kjcomps.6te.net/upload/paper1%20.pdf
[2] Liu, T.-Y., & Chu, Y.-L. (2010). Using ubiquitous games in an English listening and speaking course:
Impact on learning outcomes and motivation. Computers & Education, 55(2), 630–643.
doi:10.1016/j.compedu.2010.02.023
[3] Jara, C. a., Candelas, F. a., Puente, S. T., & Torres, F. (2011). Hands-on experiences of undergraduate
students in Automatics and Robotics using a virtual and remote laboratory. Computers & Education,
57(4), 2451–2461. doi:10.1016/j.compedu.2011.07.003

48
[4] Bujak, K. R., Radu, I., Catrambone, R., MacIntyre, B., Zheng, R., &Golubski, G. (2013). A
psychological perspective on augmented reality in the mathematics classroom. Computers &
Education, 68, 536–544. doi:10.1016/j.compedu.2013.02.017
[5] Di Serio, Á., Ibáñez, M. B., &Kloos, C. D. (2013). Impact of an augmented reality system on
students’ motivation for a visual art course. Computers & Education, 68, 586–596.
doi:10.1016/j.compedu.2012.03.002
[6] H.-Y. Chang, H.-K. Wu, and Y.-S. Hsu, “Integrating a mobile augmented reality activity to
contextualize student learning of a socioscientific issue,”, British Journal of Educational Technology,
vol. 44, no. 3, pp. E95–E99, 2013.
[7] Billinghurst, M., &Dunser, A. (2012). Augmented reality in the classroom. Computer, 45(7), 56-63
[8] D.W.F. van Krevelen and R. Poelman, "A Survey of Augmented Reality Technologies, Applications
and Limitations", 2010, http://kjcomps.6te.net/upload/paper1%20.pdf
[9] Wardle, F. (2000). How children learn: The order in mess. Children and Families, 14(4), 82-83.
[10] SteuerJonatha, "Defining Virtual Reality: Dimensions Determining Telepresence Archived", 2016
https://en.bywiki.com/wiki/Augmented_reality
[11] Chen, Brian X, "If You’re Not Seeing Data, You’re Not Seeing", 25 August 2009,
https://www.wired.com/2009/08/augmented-reality/
[12] Rosenberg, L.B."The Use of Virtual Fixtures As Perceptual Overlays to Enhance Operator
Performance in Remote Environments.",
1992https://en.bywiki.com/wiki/Augmented_reality#Visual_art
[13] F. P. Brooks Jr, “The computer scientist as toolsmith ii”, Communications of the ACM, vol. 39, no. 3,
pp. 61–68, 1996.
[14] Shatte, J. Holdsworth, and I. Lee, “Mobile augmented reality-based context-aware library
management system”, Expert System with Application, vol 41, no. 5, pp. 2174-2185,2014.
[15] S. M. Land and H. T. Zimmerman, “Synthesizing perspectives on augmented reality and mobile
learning,” TechTrends, vol. 58, no. 1, p. 3, 2014.
contextualize student learning of a socioscientific issue,” British Journal of Educational Technology,
vol. 44, no. 3, pp. E95–E99, 2013.
[17] L.Alem and W. T. Huang, “Recent trends of mobile collaborative augmented reality systems”,
Springer, 2011, http://www.wseas.us/elibrary/conferences/2014/Malaysia/ACACOS/ACACOS-
29.pdf.
[18] Wikipedia, "Augmented Reality Landscape", 11 August 2012,
https://en.bywiki.com/wiki/Augmented_reality
[19] E. Sutherland, “A head-mounted three-dimensional display”, in Proceedings of the December 9-11,
1968, fall joint computer conference, part I. ACM, 1968, pp. 757–764.
[20] D.W. Roberts, J. W. Strohbehn, J. F. Hatch, W. Murray, and H. Kettenberger, “A frameless
stereotaxic integration of computerized tomographic imaging and the operating microscope”, Journal
of neurosurgery, vol. 65, no. 4, pp. 545–549, 1986.
[21] Azuma, R., Baillot, Y., Behringer, R., &Feiner, S. (2001). Recent advances in augmented reality.
Computer Graphics and Applications. IEEE, 21(6), 34 47.

49
contextualize student learning of a socioscientific issue”, British Journal of Educational Technology,
vol. 44, no. 3, pp. E95–E99, 2013.
[23] Billinghurst, M., &Dunser, A. (2012). Augmented reality in the classroom. Computer, 45(7), 56-63
[24] S.Yuen, G. Yaoyuneyong, and E. Johnson, “Augmented reality: An overview and five directions for
ar in education,” Journal of Educational Technology Development and Exchange, vol. 4, no. 1, pp.
119–140, 2011.
[25] R. G. Thomas, N. William John, and J. M. Delieu, “Augmented reality for anatomical education,”
Journal of visual communication in medicine, vol. 33, no. 1, pp. 6–15, 2010.
[26] L. F. Johnson, A. Levine, R. S. Smith, and K. Haywood, “Key emerging technologies for elementary
and secondary education.”, Tech Directions, vol. 70, no. 3, pp. 33–34, 2010.
[27] Kiyokawa, K., Billinghurst, M., Hayes, S., Gupta, A., Sannohe, Y., & Kato, H. (2002).
Communication Behaviors of Co-Located Users in Collaborative AR Interfaces. IEEE
[28] Hawkins Mathew, "Augmented Reality Used To Enhance Both Pool And Air Hockey Game Set
WatchOctober 15", 2011. https://en.bywiki.com/wiki/Augmented_reality
[29] Wikipedia, "List of augmented reality software", June 2013
https://en.wikipedia.org/wiki/Augmented_reality#Literature
[30] Abu-Dalbouh, H.,"Developing Mobile Tracking Applications For Patient Treatment". Computer and
Information Science - Canadian center of science and education, Vol. 12, Issue 1, pp: 12-24. February
2019. DOI: 10.5539/cis. v12n1p12
[31] Abu-Dalbouh, H.M.,"A Questionnaire Approach Based on the Technology Acceptance Model for
Mobile Tracking on Patient Progress Applications". J. Comput. Sci., Vol. 9, Issue 6, pp: 763-770.
June 2013. DOI:10.3844/jcssp.2013.763.770. Available:
http://thescipub.com/PDF/jcssp.2013.763.770.pdf
[32] Abu-Dalbouh, H., and Almueit, M. Z., "Designing Mobile Tracking Solution in Monitoring Patients".
ICIT 2013 The 6th International Conference on Information Technology. May 2013.
https://www.semanticscholar.org/author/Hussain-Mohammad-Abu-Dalbouh/2422479
[33] Abu-Dalbouh, H., " m-TOPP-UML: An Extension to UML for the Modeling of Mobile Tracking on
Patient Progress System". Research Journal of Applied Sciences, Engineering and Technology, Vol.
7, Issue 7, pp: 1202-1208. February 2014.Available: http://maxwellsci.com/print/rjaset/v7-1388-
1394.pdf
[34] Abu-Dalbouh, H.,"A Proposed mHealth Model for Improving the Quality Care in Hospitals. Research
Journal of Applied Sciences", Engineering and Technology, Vol. 7, Issue 7, pp: 1215-1219. February
2014. Available: http://maxwellsci.com/print/rjaset/v7-1401-1405.pdf
[35] Abu-Dalbouh, H., AlJibreen, G., AlDowighri, N.,"Generic Modelling Using Uml Extensions for
Queens Challenge Puzzle Game From 1 to 25 Levels System". International Journal of Software
Engineering & Applications (IJSEA), Vol. 9, Issue 6, pp: 31-39. November 2018. Available:
http://aircconline.com/ijsea/V9N6/9618ijsea03.pdf
[36] Abu-Dalbouh, H., Al-Matrouk, M., Al-Zwaid, N and Al-Handi., "A Proposal of a Standardized
Electronic Health Record for Kingdom of Saudi Arabia". Journal of Computer Science. J. Comput.
Sci., Vol. 15, Issue 4, pp: 566-581. June 2019. DOI: 10.3844/jcssp.2019. pp: 566-581, 2019.
Available: https://thescipub.com/pdf/10.3844/jcssp.2019.566.581

AN APPLICATION OF PHYSICS EXPERIMENTS OF HIGH SCHOOL BY USING AUGMENTED REALITY

More Related Content

What's hot

Similar to AN APPLICATION OF PHYSICS EXPERIMENTS OF HIGH SCHOOL BY USING AUGMENTED REALITY

Recently uploaded

AN APPLICATION OF PHYSICS EXPERIMENTS OF HIGH SCHOOL BY USING AUGMENTED REALITY