Ap6532 ss
0 likes97 views
The AP 6532 is a dual-radio 802.11n access point that offers high throughput and WiNG 5 intelligence. It can serve as a virtual controller for up to 23 access points. The second radio can be used for access or troubleshooting. It features automatic channel and power optimization, high reliability through signal sensing and boosting, gap-free security including firewall and IPS capabilities. It provides full 802.11n performance using standard PoE and supports fast secure roaming, voice, location services, and guest access.
Ap6532 ss
- 1. PRODUCT SPEC SHEET AP 6532 HIGH PERFORMANCE DUAL RADIO 802.11N ACCESS POINT AP 6532 The AP 6532 is a performance-focused 802.11n access point that offers higher throughput along with WiNG 5’s direct forwarding, security, QoS services and site survivability. The second radio can be used for access or as a sensor for troubleshooting and security. With it’s WiNG 5 intelligence, this access point can serve as a virtual controller and coordinate the operation of up to 23 neighboring access points. AUTOMATIC CHANNEL AND POWER OPTIMIZATION Common problems such as building attenuation, electronic interference or sub-optimal access point placement are minimalized as the AP 6532’s SMART RF feature automatically optimizes power and channel selection so each user gets always-on high-quality access and mobility. HIGH RELIABILITY The AP 6532 is designed to optimize network availability through its central and pre-emptive intelligence which dynamically senses weak or failing signals, securely moves mobile users to alternate APs, and boosts signal power to automatically fill RF holes and ensure uninterrupted mobile user access. The access point will also continue to run if it’s connection to a local or remote controller is interrupted. Working with other local access points, the wireless network continues to function with full direct forwarding, QoS and security while also keeping users connected to local application servers. GAP-FREE SECURITY Security includes layer 2-7 stateful packet filtering firewall, AAA RADIUS services, Wireless IPS-lite, VPN gateway, and location-based access control. Users can also add role-based access control and AirDefense Wireless IPS and Rogue detection for premium-level security vigilance. Because the sensor supports simultaneous multi-band sensing (band un-locked) for both 2.4 GHz and 5.0 GHz spectrums, the Wireless IPS and rogue detection is always-on with no timeslicing. FULL PERFORMANCE USING STANDARD POE The AP 6532 is designed to provide full 802.11n performance using standard and lower cost POE 802.3 (af). DEVICE MOBILITY Supports fast, secure roaming at Layer 2 and Layer 3. In addition, the network optimizes mobile performance with load balancing, pre-emptive roaming and rate scaling. LESS IS MORE Motorola’s WiNG 5 WLAN solutions offer all the benefits of 11n—and then some. Our distributed architecture extends QoS, security and mobility services to the APs so you get better direct routing and network resilience. That means no bottleneck at the wireless controller, no latency issues for voice applications, and no jitter in your streaming video. And with our broad selection of access points and flexible network configurations, you get the network you need with less hardware to buy. Let us show you the less complicated, less expensive way to more capacity, more agility, and more satisfied users. GREATER COVERAGE PER AP The powerful 24 dBm radio increases coverage, performance and obstruction penetration versus 23 dBm radios. In addition, receiver sensitivity has been increased proportionally so users have an increased ability to maintain high-performance access through thick doors and walls to users even while on-the-move. PAGE 1
- 2. PRODUCT SPEC SHEET AP 6532 VOICE, LOCATIONING, HOTSPOTS, GUEST ACCESS Out-of-the-box, this access point supports voice over wireless LAN (VoWLAN) QoS, which ensures toll-quality even with many simultaneous VoWLAN calls on a single access point. Locationing services over 802.11 provide the ability to locate and track people or assets, and even to control access to the network or applications. In addition, its easy to provide hotspot and guest access and assure the user can only access authorized networks, sites, or applications. DEVICE AND NETWORK ACCELERATION Device and network performance can be accelerated through a virtual LAN feature via the switch/controller. Each access point can be virtualized into four unique VLANs which can be customized to direct broadcast traffic to the intended recipient. This reduces overall network traffic while improving device performance and battery life up — to 25%. This also reduces the overall number of access points required to provide unique device services. SIMPLE DEPLOYMENT AND MAINTENANCE The access point requires no configuration or manual firmware maintenance. The Motorola wireless controller discovers access points on the network and automatically downloads all configuration parameters and firmware, greatly reducing installation, maintenance and troubleshooting costs for Layer 2 and Layer 3 deployments. AP 6532 SPECIFICATIONS CHART PHYSICAL CHARACTERISTICS AP 6532 (INTERNAL ANTENNA) AP 6532 (EXTERNAL ANTENNA) Dimensions: 9.5 in. L x 7.5 in. W x 1.7 in. H 24.13 cm L x 18.916 cm W x 4.36 cm H 8.5 in. L x 5.6 in. W x 1.5 in. H 21.64 cm L x 14.10 cm W x 3.771 cm H Weight: 2.0 lbs./.91 kg 2.5 lbs./1.14 kg Part number: AP-6532-66030-OUS: internal antenna, US legal outdoors AP-6532-66030-US: internal antenna, US AP-6532-66030-WW: internal antenna, non-US AP-6532-66040-OUS: external antenna, US legal outdoors AP-6532-66040-US: external antenna, US AP-6532-66040-WW: external antenna, non-US Available mounting configurations: Ceiling-mount (to suspended ceiling T-bars, below tile); wall mount Ceiling-mount (above tile); wall-mount Plenum rated: No Yes, certified to UL 2043 LED indicators: FEATURES Full 802.11n performance with standard 802.3af Simplifies and reduces total cost of installation using standard Power-overEthernet (PoE) Multiband Operation Allows concurrent sensing on 2.4 Ghz and 5.0 Ghz frequency bands for multiband intrusion protection or troubleshooting Mobility Supports fast secure roaming Security This unique multi-purpose device can execute and enforce the IDS/IPS security policies configured in the Motorola wireless switch, and can also be utilized as a 24x7 dedicated sensor with Wireless IPS from AirDefense Application Support Supports Call Admission Control, for optimized VoWLAN performance, as well as video streaming and data throughput for 802.11 a/b/g/n clients 2 LED indicators with multiple modes indicating 2.4GHz/5 GHz Activity, Power, Adoption and Errors WIRELESS DATA COMMUNICATIONS AND NETWORKING Data rates supported: 802.11b/g: 1,2,5.5,11,6,9,12,18,24,36,48, and 54Mbps802.11a: 6,9,12,18,24,36,48, and 54Mbps 802.11n: MCS 0-15 up to 300Mbps Network standard: 802.11a, 802.11b, 802.11g, 802.11n Wireless medium: Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM), and Spatial Multiplexing (MIMO) VLANs/WLANs supported: VLANs and WLANs are controller-dependent Uplink: Auto-sensing 10/100/1000Base-T Ethernet RADIO CHARACTERISTICS Operating channels: 5GHz: All channels from 4920 MHz to 5825 MHz 2.4GHz: Chan 1-13 (2412-2472 MHz), Chan 14 (2484 MHz) Japan only Actual operating frequencies depend on national regulatory limits Maximum available transmit power: 24dBm Transmit power Adjustment: 1dB increments Antenna configuration: 2x3 MIMO (transmit on two and receive on all three antennas) Operating bands: FCC EU 2.412 to 2.462 GHz 2.412 to 2.472 GHz 5.150 to 5.250 (UNII -1) 5.150 to 5.250 GHz 5.725 to 5.825 (UNII -3) 5.150 to 5.350 GHz 5.725 to 5.850 (ISM) 5.470 to 5.725 GHz (Country Specific) Japan 2.412 to 2.484GHz 4.900 to 5.000 GHz 5.150 to 5.250 GHz Continued on next page... PAGE 2
- 3. PRODUCT SPEC SHEET AP 6532 AP 6532 SPECIFICATIONS CHART (continued) USER ENVIRONMENT AP 6532 (INTERNAL ANTENNA) AP 6532 (EXTERNAL ANTENNA) Operating temperature: 32°F to 122° F/0°C to 50° C Storage temperature: -40°F to 158° F/-40°C to 70° C Operating humidity: 5%-95% (non-condensing) Operating altitude: 8,000 ft./2438 m Storage altitude: 15,000 ft./4572 m Electrostatic discharge: +/- 15 kV (Air), +/- 8 kV (contact) POWER SPECIFICATIONS Operating voltage: 802.3af supply: 48 VDC @ 12.95W (typical), 36 VDC to 57 VDC (range) Operating current: 270mA (typical) Integrated Power-over-Ethernet support: Standards-based IEEE 802.3af MAXIMUM RADIO TRANSMIT POWER: BAND SINGLE ANTENNA COMPOSITE TRANSMIT POWER DUAL ANTENNA COMPOSITE TRANSMIT POWER 2400MHZ +21 dBm +24 dBm 5200MHZ +19dBm +22 dBm TYPICAL RMS POWER CONSUMPTION Option1 DC VOLTAGE DC AMPS 1 48V 270mA 12.95W 2 48V 209mA 10.00W DC POWER CONSUMPTION ANTENNA SPECIFICATIONS Type: Integrated 2.4 GHz and 5.2 GHz Dual-Antenna Elements Band: 2.4 GHz to 2.5 GHz; 4.9 GHz to 5.850 GHz (actual operating frequencies depend on regulatory rules and certification agency) Six RSMA connectors for external antennas (not included) VSWR: < 2:1 Antenna-specific Gain: 2.0 dBi (2.4GHz), 4.8dBi (5GHz) Antenna-specific Load balancing, pre-emptive roaming and rate scaling Increases reliability and resilience of the wireless network to support mission critical applications Dual form-factors Plenum-rated external antenna model with metal housing is ideal for installation above ceiling tiles; the plastic internalantenna housing allows for installation within the “carpeted-space” and provides cost-effective coverage via the integrated 2.4 GHz and 5.2 GHz antennas Flexible mounting options Fast and easy installation with wall, ceiling and above-ceiling tile mounting options; internal antenna version snaps on to T-bars of suspended ceilings without the use of any hardware; external antenna version installs above ceiling tiles INTERNAL ANTENNA INFORMATION INTERNAL ANTENNA DESCRIPTION VALUES VSWR < 2:1 Peak gain, 2.4GHz band 2.0dBi Peak gain, 5.2GHz band 4.8dBi REGULATORY Product safety certifications: UL 60950, cUL, EU EN 60950, TUV and UL 2043 (external antenna) Radio approvals: FCC (USA), Industry Canada, CE (Europe) and TELEC (Japan) Continued on next page... PAGE 3
- 4. PRODUCT SPEC SHEET AP 6532 RECEIVER SENSITIVITY (typical) at antenna housing connector (metal housing), 2400MHz band Rate/MCS 1 2 5.5 11 6 9 12 18 24 36 48 54 MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 MCS8 MCS9 MCS10 MCS11 MCS12 MCS13 MCS14 MCS15 MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 MCS8 MCS9 MCS10 MCS11 MCS12 MCS13 Mode Legacy Legacy Legacy Legacy Legacy Legacy Legacy Legacy Legacy Legacy Legacy Legacy HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 Average sens (dBm) -95 -94 -93 -90 -94 -94 -94 -94 -90 -87 -83 -82 -94 -93 -91 -87 -84 -80 -79 -77 -94 -91 -88 -85 -82 -78 -77 -75 -88 -88 -87 -84 -82 -77 -76 -74 -88 -87 -85 -82 -79 -75 MCS14 HT40 -73 MCS15 HT40 RECEIVER SENSITIVITY (typical) at antenna housing connector (metal housing), 5200MHz band Rate/MCS 6 9 12 18 24 36 48 54 MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 MCS8 MCS9 MCS10 MCS11 MCS12 MCS13 MCS14 MCS15 MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 MCS8 MCS9 MCS10 MCS11 MCS12 MCS13 MCS14 MCS15 Mode Legacy Legacy Legacy Legacy Legacy Legacy Legacy Legacy HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT20 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 HT40 Average sens (dBm) -93 -93 -93 -92 -89 -86 -82 -81 -93 -92 -90 -86 -83 -79 -78 -76 -93 -90 -87 -84 -81 -77 -75 -74 -90 -88 -86 -83 -80 -76 -74 -73 -89 -86 -84 -81 -78 -74 -72 -71 -71 For more information on how the AP 6532 can benefit your business, please visit us on the web at motorola.com/wlan or access our global contact directory at www.motorola.com/enterprisemobility/contactus Part number: SS-AP6532. Printed in USA 03/11. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. ©2011 Motorola Solutions, Inc. All rights reserved. G3-29-108