More Related Content
Arduino
- 1. ARDUINO THE OPEN SOURCE ELECTRONICS PROTOTYPE PLATFORM PRESENTED BY -VIGNESH A
- 2. WHAT IS ARDUINO ? CONTENTS HISTORY OF ARDUINO ARDUINO UNO BOARD BREAKDOWN MOST POPULAR ARDUINO BOARDS FEATURES OF UNO ARDUINO IDE OTHER PROTOTYPING PLATFORMS
- 3. WHAT IS ARDUINO ? Arduino is an open source programmable circuit board that can be integrated into a wide variety of makerspace projects both simple and complex. This board contains a microcontroller which is able to be programmed to sense and control objects in the physical world. By responding to sensors and inputs, the Arduino is able to interact with a large array of outputs such as LEDs, motors and displays. ‘Open source electronic prototype platform’-resources that can be used, redistributed or rewritten free of charge. often software or hardware
- 4. HISTORY OF ARDUINO It was in the year 2005 that the first ever Arduino board was born in the classrooms of the Interactive Design Institute in Ivrea, Italy. It was in the Interactive Design Institute that a hardware thesis was contributed for a wiring design by a Colombian student named Hernando Barragan. The new prototype board, the Arduino, created by Massimo Banzi and other founders
- 5. S t S tep S tep MOST POPULAR ARDUINO BOARDS ARDUINO UNO ARDUINO LEONARDO ARDUINO MEGA ARDUINO DUE ARDUINO NANO ARDUINO LILYPAD ARDUINO YUN ARDUINO MICRO
- 6. ARDUINO UNO One of the most popular Arduino boards out there is the Arduino Uno. While it was not actually the first board to be released, it remains to be the most actively used and most widely documented on the market We’re big fans of the Uno because of it’s great features and ease of use.
- 8. 1. Reset Button – This will restart any code that is loaded to the Arduino board 2. AREF – Stands for “Analog Reference” and is used to set an external reference voltage 3. Ground Pin – There are a few ground pins on the Arduino and they all work the same 4. Digital Input/Output – Pins 0-13 can be used for digital input or output 5. PWM – The pins marked with the (~) symbol can simulate analog output 6. USB Connection – Used for powering up your Arduino and uploading sketches 7. TX/RX – Transmit and receive data indication LEDs 8. ATmega Microcontroller – This is the brains and is where the programs are stored 9. Power LED Indicator – This LED lights up anytime the board is plugged in a power source 10.Voltage Regulator – This controls the amount of voltage going into the Arduino board 11.DC Power Barrel Jack – This is used for powering your Arduino with a power supply 12.3.3V Pin – This pin supplies 3.3 volts of power to your projects 13.5V Pin – This pin supplies 5 volts of power to your projects 14.Ground Pins – There are a few ground pins on the Arduino and they all work the same 15.Analog Pins – These pins can read the signal from an analog sensor and convert it to digital
- 10. ARDUINO IDE Arduino IDE where IDE stands for Integrated Development Environment - An official software introduced by Arduino.cc, that is mainly used for writing, compiling and uploading the code in the Arduino Device. Almost all Arduino modules are compatible with this software that is an open source and is readily available to install and start compiling the code on the go. This environment supports both C and C++ languages.
- 12. THANK YOU