Downloaded 1,888 times
More Related Content
![Ge Final[1]](https://cdn.slidesharecdn.com/ss_thumbnails/ge-final11249-thumbnail.jpg?width=640&height=640&fit=bounds)
Bcg, ge & ansoff
- 1. MARKETING MANAGEMENT Presented to:Ms Astha Gupta Presented by Harshita Baranwal BCG Matrix, Ansoff Matrix & GE Matrix
- 2. BCG MATRIX Boston ConsultingGroup (BCG) Matrix is developed by BRUCE HENDERSON of the BOSTON CONSULTING GROUP in the early 1970’s. According to this technique, businesses or products are classified as low or high performers depending upon their market growth rate and relative market share
- 4. STARS Stars areleaders in business. May not necessarily produce highest cash flow. They also require heavy investment, to maintain its large market share. It leads to large amount of cash consumption and cash generation. Attempts should be made to hold the market share otherwise the star will become a CASH COW.
- 5. They arefoundation of the company and often the stars of yesterday. They generate more cash than required. They extract the profits by investing as little cash as possible. Enjoys economy of scale and high profit margins being the market leader. They are located in an industry that is mature, not growing or declining. CASH COWS
- 6. DOGS Dogs arethe cash traps. Dogs do not have potential to bring in much cash. Number of dogs in the company should be minimized. Business is situated at a declining stage
- 7. QUESTION MARK Mostbusinesses start of as question marks. They will absorb great amounts of cash if the market share remains unchanged, (low). Question marks have potential to become star and eventually cash cow but can also become a dog. Investments should be high for question marks
- 8. BCG OF PEPSICO STARS PEPSICO BRANDS ???? TROPICANA GATORADE CASH COWS QUAKERS DOGS FRITO–LAY RELATIVE MARKET SHARE MARKET GROWTH RATE
- 9. ANSOFF First course ofaction should be to review whether any opportunities exist for improving it’s existing businesses’ performance. Ansoff’s model called product-market expansion grid.
- 11. • Market penetration Marketpenetration is the name given to a growth strategy where the business focuses on selling existing products into existing markets. • Market development Market development is the name given to a growth strategy where the business seeks to sell its existing products into new markets.
- 12. • Product development Productdevelopment is the name given to a growth strategy where a business aims to introduce new products into existing markets. This strategy may require the development of new competencies and requires the business to develop modified products which can appeal to existing markets. • Diversification Diversification is the name given to the growth strategy where a business markets new products in new markets
- 13. GE Matrix /McKinsey matrix portfolio analysis Model
- 14. In the latesixties and early seventies, while the Boston Consulting Group were devising the BCG or Growth Share matrix, General Electric, a leading corporation in the United States, were also looking at concepts and techniques for strategic planning. The firm was disappointed in the profits that they had made from their investments in the various businesses, which suggested flaws in GE’s approach to investment decision-making. GE asked McKinsey and Company, a consulting company in the USA, to develop a portfolio approach with a wider dimension than the BCG matrix. In 1971 McKinsey and Co developed the business screen for General Electric to differentiate the potential for future profit in each of the 43 strategic business units. Starting point of GE Matrix
- 15. Firstly, MARKET ATTRACTIVENESSreplaces MARKET GROWTH as the dimension of industry attractiveness, and includes a broader range of factors other than just the market growth rate. Secondly, COMPETITIVE STRENGTH replaces MARKET SHARE as the dimension by which the competitive position of each business unit is assessed. GE OVER BCG
- 16. In the originalGE McKinsey matrix, business strength is plotted on the vertical axis; the industry attractiveness on the horizontal axis and the size of the circle represents the size of the industry with a shaded wedge representing the firm’s current share of the industry. The matrix is divided into nine boxes.
- 17. The matrix allowsa company to assess the fit between the organizational competencies and the business/product offerings. It also introduces the forecasted positioning of businesses/products on the matrix facilitating the strategic planning process.
- 18. - Market Size -Market growth - Market profitability - Pricing trends - Competitive intensity / rivalry - Overall risk of returns in the industry - Opportunity to differentiate products and services - Segmentation - Distribution structure (e.g. retail, direct, wholesale Factors that Affect Market Attractiveness
- 19. - Strength ofassets and competencies - Relative brand strength - Market share - Customer loyalty - Relative cost position (cost structure compared with competitors) - Distribution strength - Record of technological or other innovation - Access to financial and other investment resources Factors that Affect Competitive Strength
- 20. The factors areusually identified by a representative, experienced group of managers from the firm including corporate, business and functional managers. Who Defines the Factors?
- 21. 1. The threecells at the top left hand side of the matrix are the most attractive in which to operate and require a policy of investment for growth – these are usually colored green.
- 22. 2. The threecells running diagonally from left to right have a medium attractiveness, are colored yellow and the management of businesses within this category should be more cautious and with a greater emphasis being placed on selective investment and earning retention.
- 23. 3. The threecells at the bottom right hand side are the least attractive, therefore colored red and management should follow a policy of harvesting and / or divesting unless the relative strengths can be improved.
- 24. • If anorganization is made up of many business units or if a business unit is made up of a number of different product lines. • Important for assigning priorities for investment in the various businesses of the firm and is guidance for resource allocation. • This matrix can be used at all levels within the organization. • It allows an organization to focus on the strengths and weaknesses of the business units or products. Best Use
- 25. GE of UKRetailing Source: http://www.oppapers.com/subjects/ge-matrix-marketing-page25.html
Editor's Notes
- #15 Brief History In the late sixties and early seventies, while the Boston Consulting Group were devising the BCG or Growth Share matrix, General Electric, a leading corporation in the United States, were also looking at concepts and techniques for strategic planning. The firm was disappointed in the profits that they had made from their investments in the various businesses, which suggested flaws in GE’s approach to investment decision-making. They became interested in the Growth-Share matrix and liked the visual approach depicting the positioning of a firm’s businesses on the matrix. General Electric, from all their own strategic planning research, objected to the two dimensional matrix which relied on market growth for industry attractiveness and relative market share for business strength
- #16 Summary The matrix was developed by General Electric and their consultants McKinsey and Company to differentiate the potential for future profit in each of the 43 strategic business units and therefore to differentiate resources allocation priorities. It was developed in response to the limitations seen in the Boston Consulting Group’s matrix –the Growth Share Matrix. It is a more flexible approach to portfolio planning. The axes of the matrix measure industry attractiveness on the x-axis and business strength on the y-axis. The size of the circles represents the size of the industry with a wedge representing the firm’s current share of the industry. The scope of application for this model extends from a corporate level to a business level incorporating the products making up the business. The matrix consists of nine boxes allowing the rating of the factors to be high, medium, low compared to the BCG’s low and high ratings. The model proposes that the profitability of each unit is influenced by the unit’s business strength and that the ability and incentive of a firm to maintain or improve its position in a market depends on the industry attractiveness. A highly attractive market implies high present or potential cash flow and similarly high business strength also implies high present or future cash flow. This model ascertains that industry attractiveness and business strengths are made up of any number of varying factors and that these factors may differ from organisation to organisation. Factors on both axes are weighted and rated to give the co-ordinates on the plot The matrix is divided into three general areas of invest / grow, selectivity / maintain, milk / divest. Forecasting of these factors into the future and plotting the businesses on the matrix assists with the strategic planning of a firm. The matrix has been criticised as being too complicated and paying too little attention to the business environment. This second criticism led to the development of the Environmental Strategy Matrix. Other models that can be considered as versions or adaptations of the original GE McKinsey matrix are the Shell directional policy matrix and McDonald’s directional policy matrix.
- #21 The factors are usually identified by a representative, experienced group of managers from the firm including corporate, business and functional managers.An explicit understanding of what constitutes a potentially profitable environment is essential to the formulation of strategy and for the understanding of the potential impact of competitors.A market or industry is considered to be attractive if its potential for providing a significant contribution to objectives for earnings growth and return on investment is judged to be high.
- #22 Grow / Penetrate – These businesses are a target for investment, they have strong business strengths, are in attractive markets and they should therefore have high returns on investment and competitive advantage. They should receive financial and managerial support to maintain their strong position and to continue contributing to long-term profitability.ATK – Seek dominanceGrowMaximise investment Invest for Growth – Businesses here are in very attractive industries but have average business strength. They should be invested in to improve their long-term competitive position.ATK – Evaluate potential for leadership via segmentationIdentify weaknessesBuild strengths Selective Investment or Divestment - These businesses are in very attractive markets but their business strength is weak. Investment must be aimed at improving the business strengths. These businesses will probably have to be funded by other businesses in the group as they are not self-funding. Only businesses that can improve their strengths should be retained – if not they should be divested.ATK – SpecialiseSeek nichesConsider acquisitions Selective Harvest or Investment – Businesses in this box have good business strength in an industry that is losing its attractiveness. They should be supported if necessary but they may be self-supporting in cash flow terms. Selective harvesting is an option to extract cash flow but this should be done with caution so as not to run down the business prematurely.ATK – Identify growth segmentsInvest stronglyMaintain position elsewhere Segment and Selective Investment – Businesses with average business strengths and in average industries can improve their positions by creative segmentation to create profitable segments and by selective investment to support the segmentation strategy. The business needs to create superior returns by concentrating on building segment barriers to differentiate themselves.ATK – Identify growth segmentsSpecialiseInvest selectively Controlled Exit or Harvest – Businesses with weak business strengths in moderately attractive industries are candidates for a controlled exit or divestment. Attempts to gain market share by increasing business strengths could prove to be very expensive and must be done with cautionATK – SpecialiseSeek nichesConsider exit Harvest for Cash Generation – Strong businesses in unattractive markets should be net cash generators and could provide funds for use throughout the rest of the portfolio. Investment should be aimed at keeping these businesses in a dominant position of strength but over investment can be disastrous especially in a mature market. Be aware of competitors trying to revitalise mature industriesATK – Maintain overall positionSeek cash flowInvest at maintenance level Controlled Harvest – They have average business strengths in an unattractive market and the strategy should be to harvest the business in a controlled way to prevent a defeat or the business could be used to upset a competitor.ATK – Prune linesMinimise investmentPosition to divest Rapid Exit or Attack Business – These businesses have neither strengths nor an attractive industry and should be exited. Investments made should only be done to fund the exit.ATK – Trust leaders statesmanshipGo after competitors cash generatorsTime exit and divest
- #25 Use of the GE McKinsey matrix is recommended if an organisation is made up of many business units or if a business unit is made up of a number of different product lines. General Electric used this matrix at five different levels in the organisation: product, product line, market segment, SBU, business sector. The GE McKinsey matrix is important for assigning priorities for investment in the various businesses of the firm and is guidance for resource allocation. (Hax & Majluf 1983) Investment is assigned according to the generic strategies laid out above but generally is given to businesses who show strength in an attractive market. This matrix can be used at all levels within the organisation. At the corporate level, the portfolio of businesses making up the firm can be analysed on the matrix, at the business unit level, the products making up the business’s portfolio can be mapped out onto the matrix This matrix allows one to set a strategy for the future after mapping the portfolio in the present and forecasting the future positions by assessing the factors constituting the business strengths. It allows an organisation to focus on the strengths and weaknesses of the business units or products.