Brochure servo siemens v90

siemens.com/sinamics-v90
SINAMICS V90
The performance-optimized and
easy-to-use servo drive system

2
SINAMICS V90
and SIMOTICS S-1FL6
Optimized servo drive solution
for motion control applications
Content
The SINAMICS V90 servo drive system – member of the SINAMICS and the SIMOTICS family
Servo drive system overview ................................ 03
Servo drive system advantages ............................. 05
SINAMICS V90 servo drive system
in the automation environment ............................ 10
SINAMICS V-ASSISTANT engineering tool .............. 10
SINAMICS V90 technical data
and control features .............................................. 12
System overview and connection diagrams .......... 15
SIMOTICS S-1FL6 technical data
and torque-speed characteristics .......................... 18
Step-by-step selection ........................................... 2A
SINAMICS V90 and SIMOTICS S-1FL6
ordering information ............................................ 3A
SINAMICS V90 and SIMOTICS S-1FL6
dimensions and mounting clearances ................... 6A
Servo drive system
The performance-optimized, user-friendly servo drive sys-
tem comprises a SINAMICS V90 servo drive and a SIMOTICS
S-1FL6 servomotor. Different frame sizes and motor shaft
heights cover a wide range of applications for operation on
single- and three-phase line supplies. There are eight servo
drive frame sizes and seven motor shaft heights with power
ratings ranging from 0.05 to 7.0 kilowatts, to realize a wide
range of applications, with the focus on dynamic motion
and processing – for example positioning, transporting
and winding. In addition to operation in the TIA Portal V14
with the new SIMATIC S7-1500 T-CPU Advanced Controller,
the servo drive system is also suitable for use with the
SIMATIC S7-1500 Advanced Controller and the SIMATIC
S7-1200 Basic Controller.

3
Pulse train version (PTI) PROFINET version (PN)
SINAMICS V90 servo drive
SINAMICS V90 can be integrated into a wide range of
applications, either using the pulse train version (pulse/
direction, analog, USS/Modbus RTU) or the product version
with integrated PROFINET interface.
The SINAMICS V90 pulse train version features internal
positioning, positioning with pulse train as well as speed
and torque control modes. SINAMICS V90 PROFINET version
is equipped with an integrated PROFINET interface for link-
ing the drive to an automation system via PROFIdrive pro-
file. With integrated real-time auto tuning and automatic
suppression of machine resonances, the system automati-
cally optimizes itself to achieve high dynamic performance
and smooth operation.
Highlights of the SINAMICS V90 and SIMOTICS S-1FL6 servo drive system:
Optimized servo performance Easy to use
• Advanced one-button tuning and real-time
auto tuning enables machines to achieve a high
dynamic performance
• Automatic suppression of machine resonances
• 1 MHz high-frequency pulse train input
• Different encoder types to address the requirements
of your applications
• Simple connection to a control system
• Easy, all from a single source
• Easy servo tuning and machine optimization
• Easy commissioning with SINAMICS V-ASSISTANT
• Parameter cloning
• Easy integration via PTI, PROFINET, USS, Modbus RTU
Cost effective Reliable operation
• Integrated control modes: Pulse train positioning,
internal positioning with traversing block or Modbus,
speed and torque control modes
• Integrated internal positioning function
• Integrated braking resistor in all frame sizes
• Integrated holding brake switch (for the 400 V version),
no external relay necessary
• High-quality motor bearings
• All motors have IP65 degree of protection and are
equipped with oil seal
• Integrated Safe Torque Off (STO)
SIMOTICS S-1FL6 servomotor
SIMOTICS S-1FL6 servomotors are naturally cooled, per-
manent-magnet synchronous motors where the heat is
dissipated through the motor surface. The motors can
be simply and quickly installed using the full thread and
quick-release connectors. They have a 300 percent over-
load capability and can be combined with SINAMICS V90
servo drive to create a powerful servo system with a high
degree of functionality.

4
1AC/3AC 200 V... 240 V Low Inertia
for high dynamic performance
Line supply
and power:
Pulse train (PTI) version
Control mode:
PROFINET (PN) version
Control mode:
Degree of protection:
1AC 200 V … 240 V (–15% / +10%),
0.05 kW … 0.75 kW
3AC 200 V … 240 V (–15% / +10%),
0.05 kW … 2 kW
Positioning with pulse train,
internal positioning, speed, torque
Speed control via PROFINET with
PROFIdrive profile**
IP20
4 shaft heights:
Rated torque:
Rated/max. speed:
Encoder:
20 mm, 30 mm, 40 mm, 50 mm
0.16 Nm up to 6.37 Nm
3000 rpm / 5000 rpm
Incremental encoder
TTL 2500 ppr***;
Absolute encoder single-turn 21-bit
IP65, natural cooling
Additional advantages:
High dynamic performance: High acceleration for
shorter cycle times as a result of the very low moment
of inertia
High speed: Maximum speed up to 5000 rpm can
increase machine productivity
Compact size: The reduced motor length/height
compared to High Inertia variants and compact drive
size can address critical mounting requirements
Application examples
Electronic assembly
industry,
for example
• Pick and place machine
• Stencil cutting machine
• PCB assembly machine
• IC handling machine
• Chip sorting machine
• Bonding machine
Converting/printing
industry,
for example
• Labeling machine
• Slitter machine
• Laminating/coating machine
• Screen printing machine
Packaging industry,
for example
• Filling and sealing machine
• Blister machine
(pharmaceutical packaging)
• Bag packing machine
Material handling
machinery,
for example
• Automatic palletizers
3AC 380 V... 480 V High Inertia
for smooth operational performance
Line supply
and power:
Pulse train (PTI) version
Control mode:
PROFINET (PN) version
Control mode:
3AC 380 V … 480 V (–15% / +10%),
0.4 kW … 7 kW
Positioning with pulse train,
internal positioning, speed, torque
Speed control via PROFINET with
PROFIdrive profile**
IP20
3 shaft heights:
Rated torque:
Rated/max. speed:
Encoder:
45 mm, 65 mm, 95 mm
1.27 Nm up to 33.40 Nm
2000 rpm / 3000 rpm
Incremental encoder TTL 2500 ppr;
Absolute encoder 20-bit + 12-bit
multi-turn
IP65, natural cooling
Additional advantages:
Smooth operation: Higher torque accuracy and low speed
ripple as a result of the higher moment of inertia ensures
a better product quality
Robust design: High-quality metal connector and
standard motor oil seal can withstand harsh environment
Sufficient torque output: Wide range of rated torques
up to 33.4 Nm
Application examples
Metal forming
machinery,
for example
• Punching machine
• Engraving machine
• Edging press
Converting/printing
industry,
for example
• Winders
• Slitter machine
• Laminating/coating machine
• Screen printing machine
• Wire drawing machine
Packaging industry,
for example
• Filling machine
• Blister machine
(pharmaceutical packaging)
• Bag packing machine
Material handling
machinery,
for example
• Storage and warehouse
systems
• Conveyor systems
** Position and speed control in combination with a motion function (TO axis)
of SIMATIC S7-1500 T-CPU / S7-1500 / S7-1200
*** For very low speed, high accuracy or high dynamic application TTL encoder is
not recommended
Power, performance, typical applications
The SINAMICS V90 servo drive system – member of the SINAMICS and the SIMOTICS family

5
The SINAMICS V90 servo drive system – advantages
Cost effective
Many integrated functions to reduce machine costs
Integrated control modes Pulse train
(PTI)
PROFINET
(PN)
……
DI signal/Modbus
Pulse
Analog input
Position 1
Position 2
Pulse counter
Speed/torque
SINAMICS V90 Servo drive
Pulse train input position control mode (PTI), internal
position control mode (IPos) with traversing block or
Modbus, speed control mode and torque control are
all integrated in the SINAMICS V90.
The drive has various integrated control modes to
address a wide range of applications.
Integrated PROFINET – the industrial Ethernet standard for automation Pulse train
(PTI)
PROFINET
(PN)
SINAMICS V90 PROFINET version features a PROFINET
interface, enabling real-time transmission of user/
process data and diagnostic data with a single cable.
This solution offers wide-ranging functions with
reduced complexity.
Integrated positioning function Pulse train
(PTI)
PROFINET
(PN)
Positioning
function
Positioning
function
Advanced PLC
PLC
• Positioning function is integrated in the drive.
Target positions and respective speeds can be
stored in the drive during commissioning or
changed via communication.
• Absolute or relative positioning
• Rotary or linear axes
• Referencing in the drive
Point-to-point positioning possible using a PLC
without positioning functionality.
Integrated braking resistor for all frame sizes Pulse train
(PTI)
PROFINET
(PN)
Braking resistor All frame sizes have an integrated braking resistor to
dissipate the regenerative power for fast braking.
Most applications can be realized
without an additional braking resistor.
Integrated holding brake switch (SINAMICS V90, 400 V version) Pulse train
(PTI)
PROFINET
(PN)
Holding brake
External relay
not required
Integrated holding brake switch – the brake can be
directly connected to the drive when a motor with
holding brake is used.
Holding brake can be connected without requiring
an external relay (only for SINAMICS V90, 400 V
version).

6
Optimized servo performance
Quick, smooth and precise positioning
Automatic suppression of machine resonances Pulse train
(PTI)
PROFINET
(PN)
Gain
(dB)
Gain
(dB)
f (Hz)
f (Hz)
Notch frequency
When this function is activated the drive identifies
mechanical resonance frequencies and automatically
suppresses these using a filter. Vibration and noise
during operation are reduced.
This ensures a high dynamic response of the
machine while reducing machine vibration levels.
Advanced one-button tuning and real-time auto tuning Pulse train
(PTI)
PROFINET
(PN)
n
t
n
t
Settling time Settling time
Auto tuning
Control loop parameters are optimized automatically.
One-button tuning can be used when commissioning.
This allows machines to achieve a high dynamic
performance and smooth operation in a wide range
of applications.
Optimized system performance Pulse train
(PTI)
PROFINET
(PN)
n
Torque
Time
Time
300% MN
Speed
Faster acceleration
• 300% overload capability of drive and motor
• Low motor torque ripple
• Motor and drive are perfectly harmonized
Fast acceleration and braking while maintaining
smooth operation to ensure high machine
productivity.
Sufficient encoder resolution and high data transfer rates Pulse train
(PTI)
PROFINET
(PN)
n
t
t
n
The encoder is available up to 21-bit resolution
(approx. 2.1 billion pulses per motor rotation).
The command:
• Signaling rate up to 1 MHz (pulse train version)
• 100 Mbit/s transfer rate (PROFINET version)
Allows machines to achieve a high positioning
accuracy with low speed ripple.
21 bit
PTI version
21 bit
PN version

Simple connection to a control system Pulse train
(PTI)
PROFINET
(PN)
• Two-channel pulse train for position setpoint,
one exclusively for 5 V differential (RS 422 standard),
one for 24 V single-ended signal (for pulse train
version)
• Standard RS 485 interface supports USS and
Modbus RTU (pulse train version)
• Industrial Ethernet standard PROFINET with
PROFIdrive (PROFINET version)
Standard interface makes it easy to connect
the drive with PLCs and motion controller.
7
Easy to use
Simple tuning and quick commissioning
Easy servo tuning and machine optimization Pulse train
(PTI)
PROFINET
(PN)
n
t
Amplifier internal setting
Positioning data 10
Position loop gain
Speed loop gain
…..
Speed loop integral time
Commissioning Tuning Optimizing
Dynamic
factor
Machine
stiffness
High
Med
Low
Settling time
The system can be automatically optimized using
the auto tuning function and automatic suppression
of machine resonances.
Simply plug & play, no in-depth servo know-how
required.
Easy commissioning using the SINAMICS V-ASSISTANT engineering tool Pulse train
(PTI)
PROFINET
(PN)
Graphic user interface guides the user when setting
application-specific parameters; intuitive drive and
motor status check; integrated trace and measuring
functionality.
SINAMICS V-ASSISTANT makes commissioning
and diagnostics quick and easy.
https://www.siemens.com/sinamics-v-assistant
Easy, all from a single source Pulse train
(PTI)
PROFINET
(PN)
• Predefined drive/motor bundles and accessories,
easy to select
• Tested with SIMATIC PLC / HMI and ready-to-run
application examples for connecting a
SINAMICS V90 drive to a controller
• Different application examples can be downloaded
free of charge from the Online Support Portal
(see also page 11)
Parameter cloning Pulse train
(PTI)
PROFINET
(PN)
SD
Copy
parameters
Commissioning SINAMICS V90 servo drives are equipped with a stan-
dard SD card slot (400 V version) and a Micro SD card
slot (200 V version), so that parameter settings can be
easily transferred between drive devices.
Efficient commissioning of machine series.
5 V differential
PTI version
5 V differential pulse input
24 V single-ended pulse input
RS 485 communication port
PROFINET interface
PN version
24 V single ended
USS/Modbus RTU
PROFINET

8
Reliable operation
Robust in design and a safe choice
Suitable for harsh environments Pulse train
(PTI)
PROFINET
(PN)
323V~528V
• Wide range of line voltages:
–
– 200 V ... 240 V 1AC / 3AC (–15% / +10%)
–
– 380 V ... 480 V 3AC (–15% / +10%)
• Coated PCB increases robustness of the drive
to cope with harsh environments
• Motor is equipped with high-quality
bearings
High degree of motor protection Pulse train
(PTI)
PROFINET
(PN)
Protected against
water jets
No ingress of dust
IP 6 5
Dust
Water
• SIMOTICS S-1FL6 motors have degree of protection
IP65 as standard
• Oil seal at shaft end as standard
• High-quality metal motor connector
(High inertia motors)
Integrated STO safety function (Safe Torque Off) Pulse train
(PTI)
PROFINET
(PN)
t
v STO
The STO function is a standard feature of all SINAMICS
V90 servo drives. This function prevents the motor
from moving unexpectedly and complies with safety
standard SIL 2 according to EN 61508 resp. PL d, Cat 3
according to EN ISO 13849. This safety functionality
can be realized without additional components
(activation only via terminals of SINAMICS V90, not
supported via PROFINET/PROFIsafe).

10
The SINAMICS V90 servo drive system – in the automation environment
Integrated and innovative
Support when selecting, commissioning and operating: powerful software tools
Industry Mall
The Industry Mall supports you with:
• Selecting products, services and training courses
The Industry Mall supplies you with:
• The product selection of the complete and up-to-date
Siemens automation and drive technology product
spectrum
• System configuration, DT Configurator
https://siemens.com/dt-configurator
• Download of CAX data, data sheets and schematic
diagrams
• Online shopping cart orders
• Price and order overview
• Availability check and order tracking
Link to Internet page:
https://mall.industry.siemens.com
SINAMICS V-ASSISTANT
Easy-to-use engineering tool for commissioning and diagnostics
User task-centric design for prompted machine commissioning
A PC with installed SINAMICS V-ASSISTANT software tool
can be connected to SINAMICS V90 via a standard USB
port. It is used for setting parameters, test operation,
troubleshooting – and has powerful monitoring
functions.
SINAMICS V-ASSISTANT can be downloaded free of
charge from the SINAMICS V90 Internet page.
https://siemens.com/sinamics-v90

11
Complete motion control solutions
from Siemens
Siemens application examples comprise
the following
Benefits for the customer
• Ready-to-run application example including
wiring diagram and parameter description
• Sample configuration to connect SINAMICS V90 drives
to the appropriate SIMATIC controller – this includes
hardware and software, a corresponding wiring
example, installation instructions for the S7 project
provided, drive parameterization and a HMI sample
project
• An operational project is configured properly
• A motor is quickly made operational
• Basis for a customer-specific configuration
• TIA advantages are optimally leveraged
• Can be downloaded free of charge via the
Online Support Portal:
https://siemens.com/sinamics-applications
SINAMICS V90 System and SIMATIC – Siemens offers comprehensive solutions from
a single source for general motion control applications. We can provide you with highly
efficient systems, especially through the optimum interaction between SIMATIC control
technology and SINAMICS drive technology with our “SINAMICS Application Examples.”
Example: Positioning with SINAMICS V90 using pulse/direction interface
and SIMATIC S7-1200 control via HMI
1 SITOP PSU100L power supply
2 SIMATIC S7-1200, CPU 1217C
3 KTP700 Basic
4 SINAMICS V90
5 SIMOTICS S-1FL6 servomotor
6 Mechanical limit switch
7 Inductive reference cam
1
4
7
2
3
5
6 6
Task
A SINAMICS V90 servo drive is to control a SIMOTICS
S-1FL6 servomotor. A SIMATIC S7-1200 is to be used
to select the following functions via a touch panel.
Solution
The SINAMICS V90 is controlled via the pulse/direction
interface (PTI) of the SIMATIC S7-1200. Technology
objects are employed along with the PLCopen motion
control standard to control the axis.
The move commands are entered at a SIMATIC Basic
Panel, which communicates with the SIMATIC controller
via Ethernet.
https://siemens.com/sinamics-applications

12
Technical data – SINAMICS V90 servo drive
Line supply 200 ... 240 V 1AC / 3AC
Article No. Pulse train: 6SL3210-5F
PROFINET: 6SL3210-5F
B10-1UA0
B10-1UF0
B10-2UA0
B10-2UF0
B10-4UA1
B10-4UF1
B10-8UA0
B10-8UF0
B11-0UA1
B11-0UF1
B11-5UA0
B11-5UF0
B12-0UA0
B12-0UF0
Max. motor power (kW) 0.1 0.2 0.4 0.75 1 1.5 2
Rated output current (A) 1.2 1.4 2.6 4.7 6.3 10.6 11.6
Max. output current (A) 3.6 4.2 7.8 14.1 18.9 31.8 34.8
Line supply
Voltage 1/3AC 200 V ... 240 V (–15% / +10%) 3AC 200 V ... 240 V (–15% / +10%)
Frequency 50 Hz / 60 Hz, (–10% / +10%)
Capacity (kVA) (1AC) 0.5 0.7 1.2 2 – – –
Capacity (kVA) (3AC) 0.5 0.7 1.1 1.9 2.7 4.2 4.6
Cooling Natural cooling Fan cooling
Frame size FSA* FSB FSC FSD
Dimensions WxHxD (mm) 45x170x170* 55x170x170 80x170x195 95x170x195
Weight approx. (kg) 1.07 1.20 1.94 2.49
Line supply 380 ... 480 V 3AC
Article No. Pulse train: 6SL3210-5F
PROFINET****:
6SL3210-5F
E10-4UA0
E10-4UF0
E10-8UA0
E10-8UF0
E11-0UA0
E11-0UF0
E111-5UA0
E111-5UF0
E12-0UA0
E12-0UF0
E13-5UA0
E13-5UF0
E15-0UA0
E15-0UF0
E17-0UA0
E17-0UF0
Max. motor power (kW) 0.4 0.75 1 1.75 2.5 3.5 5 7
Rated output current (A) 1.2 2.1 3 5.3 7.8 11 12.6 13.2
Max. output current (A) 3.6 6.3 9 15.9 23.4 33 37.8 39.6
Line supply Voltage 3AC 380 V … 480 V (–15% / +10%)
Frequency 50 Hz / 60 Hz, (–10% / +10%)
Capacity (kVA) 1.7 3 4.3 6.6 11.1 15.7 18 18.9
Cooling Natural cooling Fan cooling
Frame size FSAA FSA FSB FSC
Dimensions WxHxD (mm) 60x180x20 80x180x200 100x180x220 140x260x240
Weight approx. (kg) 1.45 2.09 2.73 5.95
Control power
supply
Voltage** 24 V DC (–15% / +20%)
Current*** 1.6 A (without holding brake)
3.6 A (with holding brake)
Line supply system TN, TT, IT, TT earthed line
Overload capacity 300% x rated current for 300 ms every 10 s
Control system Servo control
Braking resistor Integrated
Ambient
temperature
Operation 0 °C to 45 °C: without power derating, 45 °C to 55 °C : with power derating
Storage –40 °C to +70 °C
Ambient
humidity
Operation < 90% (no condensation)
Storage 90% (no condensation)
Pollution class 2
Vibration Operation Shock Operational area II
Peak acceleration: 5 g, 30 ms, 15 g, 11 ms
Quantity of shocks: 3 per direction × 6 direction
Duration of shock: 1 s
Vibration Operational area II
10 Hz to 58 Hz: 0.075 mm deflection
58 Hz to 200 Hz: 1 g vibration
Product
packaging
Vibration 2 Hz to 9 Hz: 3.5 mm deflection
9 Hz to 200 Hz: 1 g vibration
Quantity of cycles: 10 per axis
Sweep seed: 1 octave/min
Degree of protection IP20
Altitude ≤ 1000 m (without power derating); > 1000 m and up to 5000 m (with power derating)
Standards CE, KC, EAC, cULus, C-tick
Interface
SINAMICS V90 Pulse train version (PTI) SINAMICS V90 PROFINET version (PN)
USB Mini USB Mini USB
Pulse train input 2 channels, one exclusively for 5 V differential
signal, one for 24 V single-end signal
–
Pulse train encoder output 5 V differential signal, A, B, Z phase –
Digital inputs/outputs 10 inputs, NPN/PNP; 6 outputs, NPN 4 inputs, NPN/PNP; 2 outputs, NPN/PNP
Analog outputs 2 analog outputs, output voltage range ±10 V,
10 bits
–
Communication USS/Modbus RTU (RS 485) PROFINET RT/IRT interface with 2 ports (RJ45 sockets)
SD card slot Standard SD card with 400 V version,
Micro SD card with 200 V version
Standard SD card with 400 V version,
Micro SD card with 200 V version
Safety functions Safe Torque Off (STO) via terminal, SIL 2 Safe Torque Off (STO) via terminal, SIL 2

13
Control features – SINAMICS V90 servo drive
Control modes
SINAMICS V90 Pulse train version (PTI) SINAMICS V90 PROFINET (PN)
Control modes • Pulse train input position control (PTI)
• Internal position control (IPos), setpoints
selected using a combination of digital inputs,
or Modbus/USS
• Speed control (S)
• Torque control (T)
• Compound controls, switches between position
control, speed control, and torque control
• Jog using buttons on the integrated operator
panel
• Speed control mode: position and speed
control in combination with a motion
function (TO axis) of SIMATIC S7-1500 / S7-1200
and PROFINET
Speed control Speed input External analog input or internal speed setpoint PROFINET or internal speed setpoint
Torque limit External analog input or set using a parameter PROFINET or set using a parameter
Pulse train input
position control
Max. pulse
frequency
• Differential line driver (5 V), 1 MHz
• Optical coupler (24 V), 200 kHz
–
Multiplying
factor
Electronic gear ratio (A/B), A:1-65535,
B:1-65535, 1/50<A/B<200
–
Torque limit External analog input or set using a parameter –
Torque control
mode
Torque input External analog input or internal torque setpoint –
Speed limit Prevents speed limits from being violated,
set using a parameter for analog input
Set using a parameter
Control features
Real time auto tuning Estimates the machine characteristic and sets the closed-loop control parameters
(gain, integral time, etc.) continuously in real time without any user intervention
Resonance suppression Suppresses mechanical resonance, such as workpiece and foundation vibration
One-button auto tuning Estimates the machine load inertia and mechanical characteristics with internal movement
command (pre-configured in the SINAMICS V90). This feature can be initiated using the
SINAMICS V-ASSISTANT engineering tool
Gain switch and PI/P switch Switches between gains or from PI to P control
using an external signal or internal operating
conditions
–
Torque limit Limits motor speed using an external analog
input or internal torque limit
Motor torque is internally limited
Travel to fixed stop – Can be used to move an axis to a fixed stop
at a specified torque without a signal fault
DI/DO parameterization Freely assigns the control signals to digital inputs and digital outputs
External braking resistor An external braking resistor can be used when the internal braking resistor is not capable of
handling the regenerative energy
Measure machine The machine frequency characteristics are analyzed using SINAMICS V-ASSISTANT
Parameter cloning and Firmware
update
Standard SD card with 400 V version, Micro SD card with 200 V version.
Maximum supported capacity is 32 GB
Safety functions Safe torque off (STO) via terminal, complies with safety standard SIL 2 according to EN 61508
resp. PL d, Cat 3 according to EN ISO 13849 (activation only via terminals of SINAMICS V90,
not supported via PROFINET/PROFIsafe)
Basic Operator Panel (BOP) Integrated, 6-digit / 7-segment display, 5 buttons
Engineering PC tool SINAMICS V-ASSISTANT engineering tool exclusively for SINAMICS V90. SINAMICS V90 in combination
with S7-1500 and STEP 7 Professional engineering via TIA Portal V14 possible.
*
SINAMICS V90 PROFINET 200 V version not available in frame size A (FSA).
The power range from 0.1 kW to 0.4 kW is covered with frame size B (FSB).
**
When SINAMICS V90 controls a motor equipped with brake, the tolerance of the 24 V DC
power supply must be –10% to +10% to comply with the voltage required by the brake.
***
PROFINET version requires a 24 V DC supply with max. 1.5 A (without a holding brake),
or 3.5 A (with a holding brake). Refer to the operating instructions for detailed information.
****
SINAMICS V90 PROFINET 400 V version is available in the 2nd half of 2016

Connection diagram
14
Other control signals can be assigned to digital inputs and 6 digital outputs, please refer to the operating instructions.
Channel 1: high-speed
5 V differential pulse
train input
Channel 2: 24 V single-
end pulse train input
Speed limit
Torque limit
Servo drive
A phase pulse
B phase pulse
Z phase pulse
Recommended:
200 Ω to 500 Ω, ≥ 5 W
Zero mark
(open collector)
Motor speed
Output torque
Max. output current:
100 mA
Shielded cable
Twisted-pair wires
Only one of the pulse train input channels can be used.
12 V max. current: 100 mA
Standard wiring for pulse train input (PTI) position control mode (for detailed information and connection
diagrams for other control modes such as via PROFINET communication, please refer to the operating instructions).
The diagram below provides a reference for selecting the drive type. When commissioning the selected servo drive
system, establish the wiring connections according to the connection diagram and the instructions provided in the
operating instructions.
* Digital inputs, supporting both PNP and NPN types.
The 24 V power supplies in the connection diagram are as follows:
1)
24 V power supply for SINAMICS V90. All the PTO signals must
be connected to the controller with the same 24 V power supply
as SINAMICS V90.
2)
Isolated digital input power supply.
The controller power supply can be used.
3)
Isolated digital output power supply.
The controller power supply can be used.

15
System at glance
1/3AC 200 ... 240 V Low Inertia (LI) for high dynamic performance
3AC 380 ... 480 V High Inertia (HI) for smooth operational performance
Frame size A Frame size B Frame size C Frame size D Control / setpoint / I/O cable
SH 20 SH 30 SH 40 SH 50 Power cable Encoder cable
Frame size AA Frame size A Frame size B Frame size C
SH 45 SH 65 SH 90 Power cable
Encoder cable
Control / setpoint / I/O cable
System overview
PTI
PTI PN PN PN PN
PTI PN
PTI
PTI PN
PTI PTI
PTI PN

System overview
High-quality metal connector
Quick-release connector
SIMOTICS S-1FL6, High Inertia motor
IP65 as standard for
all motors
Oil seal with high
wear resistance
Shaft sleeve protection
High-quality bearings
SIMOTICS S-1FL6, Low Inertia motor
High-quality bearings
Oil seal with high wear
resistance
IP65 as standard for
all motors
Cost-efficient,
compact cable
Safe Torque Off
SD card slot
• To copy parameters
• Standard SD card slot
(400 V version)
• Micro SD card slot
(200 V version)
Standard mini USB socket
• To connect a PC with
engineering tool
High-quality connectors
Status indicator
• RDY indicates servo
ready/alarm state
• COM indicates
communication with PC
Integrated operator panel
• 6 digits, 7-segment LED
• 5 buttons
Braking resistor
• If the internal braking resistor is
not sufficient, disconnect DCP and
R2, then connect DCP and R1 with
an external braking resistor
Motor encoder connector
Motor holding brake
(only for SINAMICS V90,
400 V version)
Shield plate
• Easy shield connection to
cables and improved EMC
behavior
16
Pulse train version (PTI) SINAMICS PROFINET version
• RS 485 interface for
MODBUS RTU/USS to
communicate with a PLC
• 2 RJ45 connectors for
PROFINET communication
with a PLC
* Motor holding brake signal (only for SINAMICS 200 V version). The SINAMICS V90, 200 V version requires an external relay to connect the motor holding brake.
Control/status interface
Pulse train version
Setpoint interface
• 50 pins
• Pulse train input
• Encoder emulation
pulse output
• DI/DO, AI/AO
• Motor holding brake*
(only for SINAMICS V90, 200 V version)
PROFINET version
I/O interface
• 20 pins
• DI/DO
• Motor holding brake*
(only for SINAMICS V90, 200 V version)

System connection diagram
* SIMOTICS S-1FL6 Low Inertia motors SH20, SH30, SH40 use outlet connection concept.
** Brake cable connection shown here is for 400 V version only. The 200 V version requires an external relay to connect the motor brake cable.
The relay has to be connected via the setpoint cable for the SINAMICS V90 pulse train version and via I/O cable for the SINAMICS V90 PROFINET version.
***
I/O cable is necessary for the brake control of the SINAMICS V90 PROFINET 200 V version, and for applications requiring additional DI/DO in addition
to PROFINET communication.
**** For further information of PROFINET cable refer to http://automation.siemens.com/sc-static/catalogs/catalog/IK_PI_2015_en.pdf
➄
System connection diagram for the SINAMICS V90 pulse train version
17
1 Power cable
2 Encoder cable
3 Brake cable
4 Control/Setpoint cable (pulse train version)
5 I/O cable (PROFINET version)
6 PROFINET cable
7 Power connector (motor side)
8 Encoder connector (motor side)
9 Brake connector (motor side)
10 Encoder connector (drive side)
11 Setpoint connector (Pulse train version)
12 I/O connector (PROFINET version)
9
9 7
7
8
8
4
3
11
10
Controller
Encoder cable
Control / Setpoint
cable (PTI)
Brake cable**
External braking
resistor (optional)
24 V DC
SINAMICS V90
1
2
7 9
8
Circuit breaker (optional)
EMC line filter (optional)
Power cable
➄
System connection diagram of SINAMICS V90 PROFINET version
5
3
6
12
10
Controller
Encoder cable
I/O cable (PN)***
Brake cable**
PROFINET cable****
External braking
resistor (optional)
24 V DC
SINAMICS V90
1
2
7 9
8
Circuit breaker (optional)
Line filter (EMC optional)
Power cable
SIMOTICS S-1FL6 High Inertia SIMOTICS S-1FL6 Low Inertia*

18
SIMOTICS S-1FL6 Low Inertia
for high dynamic performance
SIMOTICS S-1FL6 technical data
Motor
Technical data
Article number 1FL6 022-2AF 024-2AF 032-2AF 034-2AF 042-2AF 044-2AF 052-2AF 054-2AF
Shaft height (SH) 20 30 40 50
Rated power (kW)1) 0.05 0.10 0.20 0.40 0.75 1.00 1.50 2.00
Horsepower (HP) 0.07 0.14 0.27 0.54 1.02 1.36 2.04 2.72
Rated torque (Nm) 0.16 0.32 0.64 1.27 2.39 3.18 4.78 6.37
Rated speed (rpm) 3000
Maximum torque (Nm) 0.48 0.96 1.91 3.82 7.2 9.54 14.3 19.1
Maximum speed (r/min) 5000
Rated current (A) 1.2 1.2 1.4 2.6 4.7 6.3 10.6 11.6
Maximum current (A) 3.6 3.6 4.2 7.8 14.2 18.9 31.8 34.8
Torque constant (Nm/A) 0.14 0.29 0.48 0.49 0.51 0.51 0.46 0.55
Moment of inertia (10−4
kg∙m2
)
(with brake)
0.031
(0.038)
0.052
(0.059)
0.214
(0.245)
0.351
(0.381)
0.897
(1.06)
1.15
(1.31)
2.04
(2.24)
2.62
(2.82)
Thermal class B (130 ℃)
Recommended load to
motor inertia ratio
Max. 30x Max. 20x Max. 15x
Encoder types Incremental encoder TTL 2500 ppr;
Type of construction IM B5 (IM V1 and IM V3)
Weight (kg)
(with brake)
0.47
(0.70)
0.63
(0.86)
1.02
(1.48)
1.46
(1.92)
2.8
(3.68)
3.39
(4.20)
5.35
(6.76)
6.56
(8.00)
Operating temperature 0 ~ 40 ℃
(without any restrictions）
0 ~ 30 ℃
(without any restrictions）
Operating humidity 90% RH maximum (no condensation at 30 ℃)
Vibration severity grade Grade A
Radial runout tolerance Class N
Installation altitude ≤ 1000 m (without power derating); 1000 m and up to 5000 m (with power derating)
Standards
,
Holding brake data2)
Holding torque (Nm) 0.32 Nm 1.27 Nm 3.18 Nm 6.37 Nm
Rated voltage (V) 24 V DC ± 10%
Opening time (ms) 35 75 105 90
Closing time (ms) 10 10 15 35
Rated current (A) 0.25 0.3 0.35 0.57
1)
Rated torque, rated power and maximum torque listed in the table above allow a production tolerance of 10%.
2)
It is not permissible to use the holding brake for an emergency stop.

19
Torque-speed characteristic when connected to SINAMICS V90
1000
0.1
0
0
0.2
0.3
0.4
0.6
3000
2000 4000 6000
1FL6022-2AF21
B
A
0.5
5000 1000
0.2
0
0
0.4
0.6
0.8
1.2
3000
2000 4000 6000
1FL6024-2AF21
B
A
1
5000
1000
0.5
0
0
1
1.5
2
2.5
3000
2000 4000 6000
1FL6032-2AF21
B
A
5000
1000
2
0
0
4
6
8
12
3000
2000 4000 6000
1FL6044-2AF21
B
A
10
5000
1000
2
0
0
4
8
12
16
3000
2000 4000 6000
1FL6052-2AF21
B
A
5000
6
10
14
1000
2
0
0
4
8
12
20
3000
2000 4000 6000
1FL6054-2AF21
B
A
5000
6
10
14
18
16
1000
1
0
0
2
4
6
8
3000
2000 4000 6000
1FL6042-2AF21
B
A
5000
3
5
7
1000
0.5
0
0
1
2
3
4.5
3000
2000 4000 6000
1FL6034-2AF21
B
A
4
5000
1.5
2.5
3.5
Supply voltage 220 V
Notes:
A: Continuous operating area
B: Short-term operating area
Torque
(Nm)
Torque
(Nm)
Torque
(Nm)
Torque
(Nm)
Torque
(Nm)
Torque
(Nm)
Speed (rpm)
Speed (rpm)
Speed (rpm)
Speed (rpm)
Speed (rpm)
Speed (rpm)
Torque
(Nm)
Torque
(Nm)
Speed (rpm)
Speed (rpm)

20
SIMOTICS S-1FL6 High Inertia
Torque-speed characteristic when connected to SINAMICS V90
0
0
10
20
30
40
50
60
70
80
90
100
1000 2000
1FL6096-1AC6
B
A
5
0
0
10
15
20
25
30
35
40
45
1000 2000 3000
1FL6090-1AC6
B
A
2
0
0
4
6
8
10
12
14
16
1000 2000 3000
1FL6062-1AC6
B
A
1000
1
0
0
2
3
4
5
3000
2000 4000 5000
1FL6042-1AF6
B
A
1000
2
0
0
4
6
8
10
3000
2000 4000 5000
1FL6044-1AF6
B
A
2
0
0
4
6
8
10
12
1000 2000 3000
1FL6061-1AC6
B
A
5
0
0
10
15
20
25
1000 2000 3000
1FL6064-1AC6
B
A 5
0
0
10
15
20
25
30
1000 2000 3000
B
A
1FL6066-1AC6
10
0
0
20
30
40
50
60
1000 2000 3000
1FL6092-1AC6
B
A
0
0
10
20
30
40
50
60
70
80
1000 2000 3000
1FL6094-1AC6
B
A
5
0
0
10
15
20
25
30
35
1000 2000 3000
B
A
1FL6067-1AC6
Notes:
A: Continuous operating area
B: Short-term operating area
Torque
(Nm)
Torque
(Nm)
Torque
(Nm)
Torque
(Nm)
Torque
(Nm)
Torque
(Nm)
Speed (rpm)
Speed (rpm)
Speed (rpm)
Speed (rpm)
Speed (rpm)
Speed (rpm)
Speed (rpm)
Torque
(Nm)
Torque
(Nm)
Speed (rpm)
Speed (rpm)
Torque
(Nm)
Torque
(Nm)
Torque
(Nm)
Speed (rpm)
Speed (rpm)

Motor
Technical data
Article number 1FL6 042−
1AF
044−
1AF
061−
1AC
062−
1AC
064−
1AC
066−
1AC
067−
1AC
090−
1AC
092−
1AC
094−
1AC
096−
1AC 2)
Shaft height (SH) 45 65 90
Rated power (kW)1) 0.40 0.75 0.75 1.00 1.50 1.75 2.00 2.50 3.50 5.00 7.00
Horsepower (HP) 0.54 1.02 1.02 1.36 2.04 2.38 2.72 3.40 4.76 6.80 9.52
Rated torque (Nm)1) 1.27 2.39 3.58 4.78 7.16 8.36 9.55 11.90 16.70 23.90 33.40
Rated speed (rpm) 3000 2000 2000
Maximum torque (Nm)1) 3.8 7.2 10.7 14.3 21.5 25.1 28.7 35.7 50.0 70.0 90.0
Maximum speed (rpm) 4000 3000 3000 2500 2000
Rated current (A) 1.2 2.1 2.5 3.0 4.6 5.3 5.9 7.8 11.0 12.6 13.2
Maximum current (A) 3.6 6.3 7.5 9.0 13.8 15.9 17.7 23.4 32.9 36.9 35.6
Torque constant (Nm/A) 1.1 1.2 1.5 1.7 1.6 1.7 1.7 1.6 1.6 2.0 2.7
Moment of inertia (10−4
kg∙m2
)
(with brake)
2.7
(3.2)
5.2
(5.7)
8.0
(9.1)
15.3
(16.4)
15.3
(16.4)
22.6
(23.7)
29.9
(31.0)
47.4
(56.3)
69.1
(77.9)
90.8
(99.7)
134.3
(143.2)
Thermal class B (130 °C)
Recommended load to
motor inertia ratio
Max. 10x Max. 5x Max. 5x
Encoder types Incremental encoder TTL 2500 ppr
Absolute encoder 20-bit + 12-bit multi-turn
Type of construction IM B5 (IM V1 and IM V3)
Weight (kg)4)
(with brake)
3.3
(4.6)
5.1
(6.4)
5.6
(8.6)
8.3
(11.3)
8.3
(11.3)
11.0
(14.0)
13.6
(16.6)
15.3
(21.3)
19.7
(25.7)
24.3
(30.3)
33.2
(39.1)
Operating temperature 0 ~ 40 °C (without any restrictions)
Operating humidity 90% RH maximum (no condensation at 30 °C)
Vibration severity grade Grade A
Radial runout tolerance N
Installation altitude ≤ 1000 m (without power derating); 1000 m and up to 5000 m (with power derating)
Standards
,
Holding brake data3)
Holding torque (Nm) 3.5 12.0 30.0
Rated voltage (V) 24 V DC ± 10%
Opening time (ms) 60 180 220
Closing time (ms) 45 60 115
Rated current (A) 0.9 1.5 1.9
1)
The rated torque, rated power and maximum torque listed in the table above allow for a production tolerance of 10%.
2)
For SIMOTICS S-1FL6 motors with brake, when the ambient temperature exceeds 30 ºC, the power should be derated by 10%.
Power derating is not required for other motors.
3)
It is not permissible to use the holding brake for an emergency stop.
4)
Motor weight with incremental encoder.
21
for smooth operation

Discover in detail how
Integrated Drive Systems boost
your competitive edge and
improve your time to profit.
Integrated
Drive Systems
to go: Visit our
mobile site!
Follow us on:
www.twitter.com/siemensindustry
www.youtube.com/siemens
Published by
Siemens AG 2017
Digital Factory
Motion Control
P.O. Box 31 80
91050 Erlangen, Germany
Subject to changes without prior notice
Article No. E20001-A280-P670-V3-7600
Printed in Germany
Dispo 21500
WÜ/1000173743 WS 1017 PDF
The information given in this document
only contains general descriptions and/or
performance features which may not
always specifically reflect those described,
or which may undergo modification in
the course of further development of
the products. The requested performance
features are binding only when they are
expressly agreed upon in the concluded
contract.
For the secure operation of Siemens
products and solutions, it is necessary
to take suitable preventive action (e.g.
cell protection concept) and integrate
each component into a holistic, state-
of-the-art industrial security concept.
Third-party products that may be in use
should also be considered.
For more information about industrial
security, visit
http://www.siemens.com/
industrialsecurity
There’s more to it:
siemens.com/ids

siemens.com/sinamics-v90
SINAMICS V90
Step-by-step selection
and ordering information

2. Determine the motor power rating
at the required torque and speed
3. Select encoder resolution
4. Select motor holding brake
5. Determine shaft type
The optimum servo drive solution
SINAMICS V90
has now been configured!
1 Select your motor: SIMOTICS S-1FL6
2 Select your servo drive: SINAMICS V90
4 Select your controller
3 Select your cables
1. Select your motor based on the
control properties:
• Low Inertia motor for the
highest dynamic performance in
terms of speed and acceleration
• High Inertia motor for better
load adaptation and optimum
control quality in terms of torque
and speed accuracy
1. Select your servo drive based on the motor power rating
and communication
1. Select your MOTION-CONNECT 300
connection system
• Power cable acc. to length and cross
section
• Encoder cable acc. to length and
encoder type
• Brake cable when motor holding
brake is selected acc. to length
1. Select your SIMATIC S7 controller
Basic Controller SIMATIC S7-1200 or
Advanced Controller SIMATIC S7-1500/1500 T-CPU
10
0
0
20
30
40
50
60
1000 2000 3000
B
A
SINAMICS V90
Power
(kW)
Line supply
voltage
Article number
0.05 230 V 1AC/3AC 6SL3210-5FB10-1U 0
... ... ...
2.00 230 V 3AC 6SL3210-5FB12-0U 0
0.40 400 V 3AC 6SL3210-5FE10-4U 0
... ... ...
7.00 400 V 3AC 6SL3210-5FE17-0U 0
SIMOTICS S-1FL6
Power
(kW)
Article number
High perf.
(Low Inertia)
0.05 1FL6022-2AF21-1 1
... ...
2.00 1FL6054-2AF21-0 1
Smooth
operation
(High Inertia)
0.40 1FL6042-1AF61-0 1
... ...
7.00 1FL6096-1AC61-0 1
2. Control/setpoint cable
to connect the drive to the PLC
2A
Selecting the SINAMICS V90 and SIMOTICS S-1FL6 servo drive system

Selecting the SINAMICS V90 and SIMOTICS S-1FL6 servo drive system
Ordering information:
Recommended line-side components
SINAMICS V90 Recommended line filter1) Recommended fuse/circuit breaker – IEC-compliant Recommended fuse/circuit breaker to – UL-compliant
Fuse Circuit breaker Fuse Circuit breaker
Line
supply
voltage
Article number
6SL3210-5F…
Rated
current
Article number Rated
current
Article
number
Rated current,
voltage
Article number Rated
current,
voltage
Class Rated current,
voltage
Article number
200 ... 240 V
1AC
B10-1 18 A 6SL3203-0BB21-8VA0 6 A 3NA3 801-2C 2.8–4 A, 230/240 V 3RV 2011-1EA10 6 A Listed JDDZ 2.8–4 A, 230/240 V 3RV 2011-1EA10
B10-2 6 A 3NA3 801-2C 2.8–4 A, 230/240 V 3RV 2011-1EA10 6 A Listed JDDZ 2.8–4 A, 230/240 V 3RV 2011-1EA10
B10-4 10 A 3NA3 803-2C 5.5–8 A, 230/240 V 3RV 2011-1HA10 10 A Listed JDDZ 5.5–8 A, 230/240 V 3RV 2011-1HA10
B10-8 16 A 3NA3 803-2C 9–12.5 A, 230/240 V 3RV 2011-1KA10 20 A Listed JDDZ 9–12.5 A, 230/240 V 3RV 2011-1KA10
200 ... 240 V
3AC
B10-1 5 A 6SL3203-0BE15-0VA0 6 A 3NA3 801-2C 2.8–4 A, 230/240 V 3RV 2011-1EA10 6 A Listed JDDZ 2.8–4 A, 230/240 V 3RV 2011-1EA10
B10-8 16 A 3NA3 805-2C 5.5–8 A, 230/240 V 3RV 2011-1HA10 20 A Listed JDDZ 5.5–8 A, 230/240 V 3RV 2011-1HA10
B11-0 12 A 6SL3203-0BE21-2VA0 16 A 3NA3 805-2C 7–10 A, 230/240 V 3RV 2011-1JA10 20 A Listed JDDZ 7–10 A, 230/240 V 3RV 2011-1JA10
B11-5 25 A 3NA3 810-2C 10–16 A, 230/240 V 3RV 2011-4AA10 25 A Listed JDDZ 10–16 A, 230/240 V 3RV 2011-4AA10
B12-0 25 A 3NA3 810-2C 10–16 A, 230/240 V 3RV 2011-4AA10 25 A Listed JDDZ 10–16 A, 230/240 V 3RV 2011-4AA10
380 ... 480 V
3AC
E10-4 5 A 6SL3203-0BE15-0VA0 6 A 3NA3801-6 3.2 A, 690 V AC 3RV 2021-1DA10 10 A Listed JDDZ 3.2 A, 600 V AC 3RV 2021-1DA10
E10-8 6 A 3NA3801-6 4 A, 690 V AC 3RV 2021-1EA10 10 A Listed JDDZ 4 A, 690 V AC 3RV 2021-1EA10
E11-0 10 A 3NA3803-6 5 A, 690 V AC 3RV 2021-1FA10 10 A Listed JDDZ 5 A, 690 V AC 3RV 2021-1FA10
E11-5 12 A 6SL3203-0BE21-2VA0 10 A 3NA3803-6 10 A, 690 V AC 3RV 2021-1HA10 15 A Listed JDDZ 10 A, 690 V AC 3RV 2021-1HA10
E12-0 16 A 3NA3805-6 16 A, 690 V AC 3RV 2021-4AA10 15 A Listed JDDZ 16 A, 690 V AC 3RV 2021-4AA10
E13-5 20 A 6SL3203-0BE22-0VA0 20 A 3NA3807-6 20 A, 690 V AC 3RV 2021-4BA10 25 A Listed JDDZ 20 A, 690 V AC 3RV 2021-4BA10
E15-0 20 A 3NA3807-6 20 A, 690 V AC 3RV 2021-4BA10 25 A Listed JDDZ 20 A, 690 V AC 3RV 2021-4BA10
E17-0 25 A 3NA3810-6 25 A, 690 V AC 3RV 2021-4DA10 25 A Listed JDDZ 25 A, 690 V AC 3RV 2021-4DA10
1)
With one of the recommended line filters, EN 61008-3 category C2 can be reached in combination with SINAMICS V90, more information please refer to
SINAMICS V90 Operating instruction – EMC instructions.
2)
When the internal braking resistor is not sufficient, select a standard braking resistor according to the table.
3)
7 m cable length is only available for high inertia motors (3AC 400 V).
Rated
Power
(kW)
Rated
torque
(Nm)
Rated
speed
(rpm)
Shaft
height
(mm)
Article number
High dynamic
performance
(Low Inertia)
0.05 0.16 3000 20 1FL6022-2AF21-1 1
0.10 0.32 3000 1FL6024-2AF21-1 1
0.20 0.64 3000 30 1FL6032-2AF21-1 1
0.40 1.27 3000 1FL6034-2AF21-1 1
0.75 2.39 3000 40 1FL6042-2AF21-1 1
1.00 3.18 3000 1FL6044-2AF21-1 1
1.50 4.78 3000 50 1FL6052-2AF21-0 1
2.00 6.37 3000 1FL6054-2AF21-0 1
Encoder type
Incremental encoder TTL 2500 ppr A
Absolute encoder single-turn 21-bit* M
Smooth opera-
tion (High Inertia)
0.40 1.27 3000 45 1FL6042 -1AF61-0 1
0.75 2.39 3000 1FL6044 -1AF61-0 1
0.75 3.58 2000 65 1FL6061 -1AC61-0 1
1.00 4.77 2000 1FL6062 -1AC61-0 1
1.50 7.16 2000 1FL6064 -1AC61-0 1
1.75 8.4 2000 1FL6066 -1AC61-0 1
2.00 9.5 2000 1FL6067 -1AC61-0 1
2.50 11.9 2000 90 1FL6090 -1AC61-0 1
3.50 16.7 2000 1FL6092 -1AC61-0 1
5.00 23.9 2000 1FL6094 -1AC61-0 1
7.00 33.4 2000 1FL6096 -1AC61-0 1
Encoder type Incremental encoder TTL 2500 ppr A
Absolute encoder 20-bit + 12-bit multi-turn L
Shaft type
feather key and
holding brake
Feather key, without holding brake A
Feather key, with holding brake** B
Plain shaft, without holding brake G
Plain shaft, with holding brake** H
* available in the 2nd half of 2017
** The SIMOTICS S-1FL6 Low Inertia motor requires an external relais to actuate the motor
holding brake. See SINAMICS V90 operating instructions.
1 SINAMICS V90 servo drive
Rated
power
(kW)
Line supply
voltage
Frame
size
Article number
0.10 200 ... 240 V
1AC / 3AC
FSA*** 6SL3210-5FB10-1U 0
0.20 6SL3210-5FB10-2U 0
0.40 FSB 6SL3210-5FB10-4U 1
0.75 FSC 6SL3210-5FB10-8U 0
1.00 200 ... 240 V
3AC
FSD 6SL3210-5FB11-0U 1
1.50 6SL3210-5FB11-5U 0
2.00 6SL3210-5FB12-0U 0
0.40 380 ... 480 V
3AC
FSAA 6SL3210-5FE10-4U 0
0.75 FSA 6SL3210-5FE10-8U 0
0.75 6SL3210-5FE11-0U 0
1.00
1.50 FSB 6SL3210-5FE11-5U 0
1.75
2.00 6SL3210-5FE12-0U 0
2.50
3.50 FSC 6SL3210-5FE13-5U 0
5.00 6SL3210-5FE15-0U 0
7.00 6SL3210-5FE17-0U 0
SINAMICS V90 pulse train (PTI) version A
SINAMICS V90 PROFINET (PN) version
(V90 PROFINET version 400 V available
in the 2nd half of 2016)
F
***
SINAMICS V90 PROFINET 200 V version is not available in
frame size A (FSA). The power range from 0.1 kW to 0.4 kW
is covered with frame size B (FSB).
2
SINAMICS V90 Servo system
3A

4A
MOTION-CONNECT 300 cables between SINAMICS V90 servo drive
and SIMOTICS S-1FL6 servomotor
Power cable Encoder cable Brake cable
Article number Article number Article number
6FX3002-5CK01-1 0 6FX3002-2 20-1 0 6FX3002-5BK02-1 0
6FX3002-5CK31-1 0 6FX3002-2 10-1 0 6FX3002-5BL02-1 0
6FX3002-5CL01-1 0 6FX3002-2 10-1 0 6FX3002-5BL02-1 0
6FX3002-5CL11-1 0
Length: 3 m A D A D A D
Length: 5 m A F A F A F
Length: 7 m3)
A H A H A H
Length: 10 m B A B A B A
Length: 20 m C A C A C A
For incremental encoder TTL 2500 ppr C T
For absolute encoder single-turn 21-bit
Absolute encoder 20-bit + 12-bit multi-turn D B
3
Cables between SINAMICS V90 servo drive
and PLC
Article number
6SL3260-4NA00-1VB0
Control/setpoint cable, 1 m cable with
connector (MDR 50-pin connector,
free pins to controller side)
or
6SL3260-4NA00-1VA5
Control/setpoint cable 0.5 m cable with
connectors on both sides and separate
terminal block (MDR 50-pin connector,
terminal block to controller side)
I/O cable between SINAMICS V90 drive
and controller
Article number
6SL3260-4MA00-1VB0
I/O cable, 1 m cable with 20-pin MDR
connector (free pins to controller side)
PROFINET cable
6GK1901-1BB10-2AA0
RJ45 data plug-in connector,
with 180° (straight) cable outlet
6XV1840-2AH10
Standard bus cable (4-core), sold by meter,
not assembled
6XV1871-5BH10
Preassembled cable, 1 m, with two RJ45 plug-180
Connectors
Connectors Plug on Article number Packaging
unit (pcs)
50-pin MDR connector for setpoint cable drive side 6SL3260-2NA00-0VA0 30
Encoder connector drive side 6FX2003-0SB14 30
20-pin MDR connector for I/O cable drive side 6SL3260-2MA00-0VA0 5
Power connector motor side 6FX2003-0LL1
Incremental encoder TTL 2500 ppr connector motor side 6FX2003-0SL1
Brake connector motor side 6FX2003-0LL5
Absolute encoder 20-bit + 12-bit multi-turn
connector
motor side 6FX2003-0DB1
For SIMOTICS S-1FL6 motors with shaft heights of 45, 50, 65, 90 1 30
For SIMOTICS S-1FL6 motors with shaft heights of 20, 30, and 40 2 5
Requirements for external braking resistor
External braking resistor2)
Line
supply
voltage
Frame size Resis-
tance
(Ω)
Max.
power
(kW)
Rated
power
(W)
Max.
energy
(kJ)
200 ... 240 V
1AC/3AC
FSA 150 1.09 20 0.8
FSB 100 1.64 21 1.23
FSC 50 3.28 62 2.46
FSD, 1 kW 50 3.28 62 2.46
FSD, 1.5 to 2 kW 25 6.56 123 4.92
380 ... 480 V
3AC
FSAA 533 1.2 30 2.4
FSA 160 4 100 8
FSB 70 9.1 229 18.3
FSC 27 23.7 1185 189.6
Replacement parts
Replacement connector kits
(contains control connectors,
power connectors)
for SINAMICS V90 400 V FSAA 6SL3200-0WT00-0AA0
for SINAMICS V90 400 V FSA 6SL3200-0WT01-0AA0
for SINAMICS V90 200 V FSA/FSB 6SL3200-0WT02-0AA0
for SINAMICS V90 200 V FSC/FSD 6SL3200-0WT03-0AA0
Replacement fan for SINAMICS V90 400 V FSB, 200 V FSD 6SL3200-0WF00-0AA0
for SINAMICS V90 400 V FSC 6SL3200-0WF01-0AA0

5A
SINAMICS V90 pulse train (PTI), USS/Modbus RTU version to SIMATIC controller
SIMATIC S7-1200 Basic controller Communication
CPU Article number Digital outputs RS 485
communication for USS or Modbus RTU
Article number
CPU 1211C DC/DC/DC 6ES7211-1 -0XB0
4 DO with 100 kHz
rest 30 kHz
CM 1241 RS 422/485
or
CB 1241 RS 485
6ES7241-1CH32-0XB0
or
6ES7241-1CH30-0XB0
CPU 1217C DC/DC/DC 6ES7217-1 -0XB0 4 DO with 1 MHz rest 100 kHz
Signal boards
Note:
One SIMATIC S7-1200 CPU can control up to 4 SINAMICS V90 axes,
while each axis requires 2 fast digital output for the pulse train interface.
One SIMATIC S7-1200 CPU is only expandable with either a signal board
or a communication board.
For detailed and further information about SIMATIC controllers please
refer to the SIMATIC S7-1200 brochure, catalog or web page:
http://siemens.com/simatic-s7-1200
CPU Article number Digital outputs
SB 1222 DC 200 kHz 6ES7222-1BD30-0XB0 4 x 24 V DC 200 kHz
SB 1222 DC 200 kHz 6ES7222-1AD30-0XB0 4 x 5 V DC 200 kHz
SB 1223 DC/DC 200 kHz 6ES7223-3BD30-0XB0 2 x 24 V DC 200 kHz
SB 1223 DC/DC 200 kHz 6ES7223-3AD30-0XB0 2 x 5 V DC 200 kHz
4
SINAMICS V90 PROFINET version to SIMATIC controller
SIMATIC S7-1500/1500 T for advanced motion control SIMATIC S7-1200 for basic motion control
Standard CPU Article number Failsafe CPU Article number CPU Article number
S7-1511 6ES7511-1AK01-0AB0 S7-1511F 6ES7511-1FK01-0AB0 1211C DC/DC/DC 6ES7211-1 -0XB0
S7-1513 6ES7513-1AL01-0AB0 S7-1513F 6ES7513-1FL01-0AB0 1212C DC/DC/DC 6ES7212-1 -0XB0
S7-1515 6ES7515-2AM01-0AB0 S7-1515F 6ES7515-2FM01-0AB0 1214C DC/DC/DC 6ES7214-1 -0XB0
S7-1516 6ES7516-3AN01-0AB0 S7-1516F 6ES7516-3FN01-0AB0 1215C DC/DC/DC 6ES7215-1 -0XB0
S7-1517 6ES7517-3AP00-0AB0 S7-1517F 6ES7517-3FP00-0AB0 1217C DC/DC/DC 6ES7217-1 -0XB0
S7-1518 6ES7518-4AP00-0AB0 S7-1518F 6ES7518-4FP00-0AB0
Technology CPU Article number Failsafe CPU Article number For further information about PROFINET cables refer to
http://automation.siemens.com/sc-static/catalogs/
catalog/IK_PI_2015_en.pdf
For further information about SIMATIC controllers
please refer to the SIMATIC S7 catalog or web page:
http://siemens.com/simatic
S7-1511T 6ES7511-1TK01-0AB0 – –
S7-1515T 6ES7515-2TM01-0AB0 – –
S7-1517T 6ES7517-3TP00-0AB0 S7-1517TF 6ES7517-3UP00-0AB0
Note:
Technology Objects: SINAMICS V90 as a PROFINET I/O device with PROFIdrive supports technology objects
of S7-1200/S7-1500/S7-1500 T-CPU for speed and positioning control. Function blocks: SINAMICS V90
only supports SINA_SPEED (speed), SINA_POS (positioning) is NOT supported yet.
4
Accessories
Training case SINAMICS V90 LI, 200 V
(PTI, USS/Modbus RTU version)
6AG1067-2AA00-0AC0
SINAMICS SD card for SINAMICS V90 in 400 V version 6SL3054-4AG00-2AA0
SIMATIC S7 controller

SINAMICS V90 dimensions
SINAMICS V90
Dimensions and mounting clearances
Mounting
clearances (mm)
100
100
10 10 10 10
5V differential
24V single end
ontroller
5V differential
24V single end
PLC
Motion controller
5V differential
24V single end
PLC

FSAA
SINAMICS
V90
400
V
frame
size
AA

FSA
SINAMICS
V90
400
V
frame
size
A

FSB
SINAMICS
V90
400
V
frame
size
B

FSC
SINAMICS
V90
400
V
frame
size
C
28
158
8.5
7
6
11
2- 5.6
202
170
85 170
100
45
7
2- 5.6
11
158
38 8.5 85 170 55
202
100
170
6
200.5
158
6
7
8.5
63 85 195 80
100
170
2- 11
4- 5.8
4- 5.8
2- 11
200.5
6
8.5
78 85 195 95
158
100
170
7
SINAMICS
V90
200
V
frame
size
D
FSD
Dimension drawings (mm)
FSA*
SINAMICS
V90
200
V
frame
size
A
*
FSB
SINAMICS
V90
200
V
frame
size
B
SINAMICS
V90
200
V
frame
size
C
FSC
6A
*
SINAMICS V90 PROFINET 200 V version is not available in frame size A (FSA).
The power range from 0.1 kW to 0.4 kW is covered with frame size B (FSB)

SIMOTICS S-1FL6 dimensions
Dimension drawings (mm) SIMOTICS S-1FL6 Low Inertia servomotors
Shaft
height
Without
brake
With brake
Type LC LA LZ LB LH LR T LG D DB E QK GA F LL KB1 LL KB1 KB2 KL1 KL2
20 1FL6022
-2AF
40 46 4.5 30 40 25 2.5 6 8 M3x8 22 17.5 9 3 86 – 119 – – – –
1FL6024
-2AF
40 46 4.5 30 40 25 2.5 6 8 M3x8 22 17.5 9 3 106 – 139 – – – –
30 1FL6032
-2AF
60 70 5.5 50 50 31 3 8 14 M4x15 26 22.5 16 5 98 – 132.5 – – – –
1FL6034
-2AF
60 70 5.5 50 50 31 3 8 14 M4x15 26 22.5 16 5 123 – 157.5 – – – –
40 1FL6042
-2AF
80 90 7 70 60 35 3 8 19 M6x16 30 28 21.5 6 139 – 178.3 – – – –
1FL6044
-2AF
80 90 7 70 60 35 3 8 19 M6x16 30 28 21.5 6 158.8 – 198.1 – – – –
50 1FL6052
-2AF
100 115 9 95 – 45 3 12 19 M6x16 40 28 21.5 6 192 143.5 226 177.5 32.5 135 80
1FL6054
-2AF
100 115 9 95 – 45 3 12 19 M6x16 40 28 21.5 6 216 167.5 250 201.5 32.5 135 80
SH20, SH30 and SH40
SH50
Oil seal
Encoder connector
Power connector
Brake connector
Oil seal
KB2 38
59
7A
Note: ① Power connector, ② Incremental encoder connector, ③ Brake connector
Connectors should be ordered separately, for ordering information please refer to section “Options”
in this document.
Outline dimensions of ② incremental encoder connector ③ brake connector are the same.
350
(6)
350
(8
)
(6)
F
GA
QK
∅D
∅LB
∅D
DB
LG
LR
E
LL
∅LZ
LH
∅LA
LC
45°
KB1
∅LZ
LC
45°
∅LA
LL
T
F
GA
QK
∅D
∅LB
∅D
E
T
LR
DB
LG
KL 1
KL 2
3
1
2

SIMOTICS S-1FL6 dimensions
Dimension drawings (mm) SIMOTICS S-1FL6 High Inertia servomotors
with incremental encoder
Shaft
height
Without brake With brake
Type LC LA LZ LB LR T LG D DB E QK GA F LL KB1 KB2 LL KB1 KB2 KL1 KL2 KL3 KL4
45 1FL6042
-1AF
90 100 7 80 35 4 10 19 M6x16 30 25 21.5 6 154.5 93.5 － 201 140 31.5 136 92 －－
1FL6044
-1AF
90 100 7 80 35 4 10 19 M6x16 30 25 21.5 6 201.5 140.5 － 248 187 31.5 136 92 －－
65 1FL6061
-1AC
130 145 9 110 58 6 12 22 M8x16 50 44 25 8 148 85.5 － 202.5 140 39.5 158 115 23 22
1FL6062
-1AC
130 145 9 110 58 6 12 22 M8x16 50 44 25 8 181 118.5 － 235.5 173 39.5 158 115 23 22
1FL6064
-1AC
130 145 9 110 58 6 12 22 M8x16 50 44 25 8 181 118.5 － 235.5 173 39.5 158 115 23 22
1FL6066
-1AC
130 145 9 110 58 6 12 22 M8x16 50 44 25 8 214 151.5 － 268.5 206 39.5 158 115 23 22
1FL6067
-1AC
130 145 9 110 58 6 12 22 M8x16 50 44 25 8 247 184.5 － 301.5 239 39.5 158 115 23 22
90 1FL6090
-1AC
180 200 13.5 114.3 80 3 18 35 M12x25 75 60 38 10 189.5 140 － 255 206 44.5 184 149 34 34
1FL6092
-1AC
180 200 13.5 114.3 80 3 18 35 M12x25 75 60 38 10 211.5 162 － 281 232 44.5 184 149 34 34
1FL6094
-1AC
180 200 13.5 114.3 80 3 18 35 M12x25 75 60 38 10 237.5 188 － 307 258 44.5 184 149 34 34
1FL6096
-1AC
180 200 13.5 114.3 80 3 18 35 M12x25 75 60 38 10 289.5 240 － 359 310 44.5 184 149 34 34
Note: ① Power connector, ② Incremental encoder connector, ③ Brake connector
in this document.
Outline dimensions of ② incremental encoder connector ③ brake connector are the same.
Shaft height 90 motor has M8 screws for eyebolts.
Version with feather key
Oil seal
8A

Dimension drawings (mm) SIMOTICS S-1FL6 High Inertia servomotors
with absolute encoder
Shaft
height
Without brake With brake
Type LC LA LZ LB LR T LG D DB E QK GA F LL KB1 KB2 LL KB1 KB2 KL1 KL2 KL3 KL4
45 1FL6042
-1AF
90 100 7 80 35 4 10 19 M6x16 30 25 21.5 6 157 100 － 203.5 147 31.5 136 60 －－
1FL6044
-1AF
90 100 7 80 35 4 10 19 M6x16 30 25 21.5 6 204 147 － 250.5 194 31.5 136 60 －－
65 1FL6061
-1AC
130 145 9 110 58 6 12 22 M8x16 50 44 25 8 151 92 － 205.5 147 39.5 158 60 －－
1FL6062
-1AC
130 145 9 110 58 6 12 22 M8x16 50 44 25 8 184 125 － 238.5 180 39.5 158 60 －－
1FL6064
-1AC
130 145 9 110 58 6 12 22 M8x16 50 44 25 8 184 125 － 238.5 180 39.5 158 60 －－
1FL6066
-1AC
130 145 9 110 58 6 12 22 M8x16 50 44 25 8 217 158 － 271.5 213 39.5 158 60 －－
1FL6067
-1AC
130 145 9 110 58 6 12 22 M8x16 50 44 25 8 250 191 － 304.5 246 39.5 158 60 －－
90 1FL6090
-1AC
180 200 13.5 114.3 80 3 18 35 M12x25 75 60 38 10 197 135 － 263 201 44.5 184 60 －－
1FL6092
-1AC
180 200 13.5 114.3 80 3 18 35 M12x25 75 60 38 10 223 161 － 289 227 44.5 184 60 －－
1FL6094
-1AC
180 200 13.5 114.3 80 3 18 35 M12x25 75 60 38 10 249 187 － 315 253 44.5 184 60 －－
1FL6096
-1AC
180 200 13.5 114.3 80 3 18 35 M12x25 75 60 38 10 301 239 － 367 305 44.5 184 60 －－
Note: ① Power connector, ② Absolute encoder connector, ③ Brake connector
in this document.
Outline dimensions of ② absolute encoder connector ③ brake connector are the same.
Shaft height 90 motor has M8 screws for eyebolts.
Version with feather key
Oil seal
9A

Brochure servo siemens v90

More Related Content

What's hot (20)

Similar to Brochure servo siemens v90 (20)

More from Công ty công nghệ tự động hóa Hoàng Gia (20)

Recently uploaded (20)

Brochure servo siemens v90