Ch10 dependable systems

Chapter 10 – Dependable systems
30/10/2014 Chapter 10 Dependable Systems 1

Topics covered
 Dependability properties
 Sociotechnical systems
 Redundancy and diversity
 Dependable processes
 Formal methods and dependability

System dependability
 For many computer-based systems, the most important
system property is the dependability of the system.
 The dependability of a system reflects the user’s degree
of trust in that system. It reflects the extent of the user’s
confidence that it will operate as users expect and that it
will not ‘fail’ in normal use.
 Dependability covers the related systems attributes of
reliability, availability and security. These are all inter-
dependent.
3Chapter 10 Dependable Systems30/10/2014

Importance of dependability
 System failures may have widespread effects with large
numbers of people affected by the failure.
 Systems that are not dependable and are unreliable,
unsafe or insecure may be rejected by their users.
 The costs of system failure may be very high if the failure
leads to economic losses or physical damage.
 Undependable systems may cause information loss with
a high consequent recovery cost.

Causes of failure
 Hardware failure
 Hardware fails because of design and manufacturing errors or
because components have reached the end of their natural life.
 Software failure
 Software fails due to errors in its specification, design or
implementation.
 Operational failure
 Human operators make mistakes. Now perhaps the largest
single cause of system failures in socio-technical systems.

Dependability properties

The principal dependability properties

Principal properties
 Availability
 The probability that the system will be up and running and able
to deliver useful services to users.
 Reliability
 The probability that the system will correctly deliver services as
expected by users.
 Safety
 A judgment of how likely it is that the system will cause damage
to people or its environment.

Principal properties
 Security
 A judgment of how likely it is that the system can resist
accidental or deliberate intrusions.
 Resilience
 A judgment of how well a system can maintain the continuity of
its critical services in the presence of disruptive events such as
equipment failure and cyberattacks.

Other dependability properties
 Repairability
 Reflects the extent to which the system can be repaired in the
event of a failure
 Maintainability
 Reflects the extent to which the system can be adapted to new
requirements;
 Error tolerance
 Reflects the extent to which user input errors can be avoided
and tolerated.

Dependability attribute dependencies
 Safe system operation depends on the system being
available and operating reliably.
 A system may be unreliable because its data has been
corrupted by an external attack.
 Denial of service attacks on a system are intended to
make it unavailable.
 If a system is infected with a virus, you cannot be
confident in its reliability or safety.
Chapter 10 Dependable Systems 1130/10/2014

Dependability achievement
 Avoid the introduction of accidental errors when
developing the system.
 Design V & V processes that are effective in discovering
residual errors in the system.
 Design systems to be fault tolerant so that they can
continue in operation when faults occur
 Design protection mechanisms that guard against
external attacks.

Dependability achievement
 Configure the system correctly for its operating
environment.
 Include system capabilities to recognise and resist
cyberattacks.
 Include recovery mechanisms to help restore normal
system service after a failure.

Dependability costs
 Dependability costs tend to increase exponentially as
increasing levels of dependability are required.
 There are two reasons for this
 The use of more expensive development techniques and
hardware that are required to achieve the higher levels of
dependability.
 The increased testing and system validation that is required to
convince the system client and regulators that the required levels
of dependability have been achieved.

Cost/dependability curve

Dependability economics
 Because of very high costs of dependability
achievement, it may be more cost effective to accept
untrustworthy systems and pay for failure costs
 However, this depends on social and political factors. A
reputation for products that can’t be trusted may lose
future business
 Depends on system type - for business systems in
particular, modest levels of dependability may be
adequate

Sociotechnical systems

Systems and software
 Software engineering is not an isolated activity but is part
of a broader systems engineering process.
 Software systems are therefore not isolated systems but
are essential components of broader systems that have
a human, social or organizational purpose.
 Example
 The wilderness weather system is part of broader weather
recording and forecasting systems
 These include hardware and software, forecasting processes,
system users, the organizations that depend on weather
forecasts, etc.

The sociotechnical systems stack

Layers in the STS stack
 Equipment
 Hardware devices, some of which may be computers. Most
devices will include an embedded system of some kind.
 Operating system
 Provides a set of common facilities for higher levels in the
system.
 Communications and data management
 Middleware that provides access to remote systems and
databases.
 Application systems
 Specific functionality to meet some organization requirements.

Layers in the STS stack
 Business processes
 A set of processes involving people and computer systems that
support the activities of the business.
 Organizations
 Higher level strategic business activities that affect the operation
of the system.
 Society
 Laws, regulation and culture that affect the operation of the
system.

Holistic system design
 There are interactions and dependencies between the
layers in a system and changes at one level ripple
through the other levels
 Example: Change in regulations (society) leads to changes in
business processes and application software.
 For dependability, a systems perspective is essential
 Contain software failures within the enclosing layers of the STS
stack.
 Understand how faults and failures in adjacent layers may affect
the software in a system.

Regulation and compliance
 The general model of economic organization that is now
almost universal in the world is that privately owned
companies offer goods and services and make a profit
on these.
 To ensure the safety of their citizens, most governments
regulate (limit the freedom of) privately owned
companies so that they must follow certain standards to
ensure that their products are safe and secure.

Regulated systems
 Many critical systems are regulated systems, which
means that their use must be approved by an external
regulator before the systems go into service.
 Nuclear systems
 Air traffic control systems
 Medical devices
 A safety and dependability case has to be approved by
the regulator. Therefore, critical systems development
has to create the evidence to convince a regulator that
the system is dependable, safe and secure.

Safety regulation
 Regulation and compliance (following the rules) applies
to the sociotechnical system as a whole and not simply
the software element of that system.
 Safety-related systems may have to be certified as safe
by the regulator.
 To achieve certification, companies that are developing
safety-critical systems have to produce an extensive
safety case that shows that rules and regulations have
been followed.
 It can be as expensive develop the documentation for
certification as it is to develop the system itself.

Redundancy and diversity

Redundancy and diversity
 Redundancy
 Keep more than a single version of critical components so that if
one fails then a backup is available.
 Diversity
 Provide the same functionality in different ways in different
components so that they will not fail in the same way.
 Redundant and diverse components should be
independent so that they will not suffer from ‘common-
mode’ failures
 For example, components implemented in different programming
languages means that a compiler fault will not affect all of them.

Diversity and redundancy examples
 Redundancy. Where availability is critical (e.g. in e-
commerce systems), companies normally keep backup
servers and switch to these automatically if failure
occurs.
 Diversity. To provide resilience against external attacks,
different servers may be implemented using different
operating systems (e.g. Windows and Linux)

Process diversity and redundancy
 Process activities, such as validation, should not depend
on a single approach, such as testing, to validate the
system.
 Redundant and diverse process activities are important
especially for verification and validation.
 Multiple, different process activities the complement
each other and allow for cross-checking help to avoid
process errors, which may lead to errors in the software.

Problems with redundancy and diversity
 Adding diversity and redundancy to a system increases
the system complexity.
 This can increase the chances of error because of
unanticipated interactions and dependencies between
the redundant system components.
 Some engineers therefore advocate simplicity and
extensive V & V as a more effective route to software
dependability.
 Airbus FCS architecture is redundant/diverse; Boeing
777 FCS architecture has no software diversity

Dependable processes

Dependable processes
 To ensure a minimal number of software faults, it is
important to have a well-defined, repeatable software
process.
 A well-defined repeatable process is one that does not
depend entirely on individual skills; rather can be
enacted by different people.
 Regulators use information about the process to check if
good software engineering practice has been used.
 For fault detection, it is clear that the process activities
should include significant effort devoted to verification
and validation.

Dependable process characteristics
 Explicitly defined
 A process that has a defined process model that is used to drive
the software production process. Data must be collected during
the process that proves that the development team has followed
the process as defined in the process model.
 Repeatable
 A process that does not rely on individual interpretation and
judgment. The process can be repeated across projects and with
different team members, irrespective of who is involved in the
development.

Attributes of dependable processes
Process characteristic Description
Auditable The process should be understandable by people apart
from process participants, who can check that process
standards are being followed and make suggestions for
process improvement.
Diverse The process should include redundant and diverse
verification and validation activities.
Documentable The process should have a defined process model that
sets out the activities in the process and the
documentation that is to be produced during these
activities.
Robust The process should be able to recover from failures of
individual process activities.
Standardized A comprehensive set of software development
standards covering software production and
documentation should be available.

Dependable process activities
 Requirements reviews to check that the requirements
are, as far as possible, complete and consistent.
 Requirements management to ensure that changes to
the requirements are controlled and that the impact of
proposed requirements changes is understood.
 Formal specification, where a mathematical model of the
software is created and analyzed.
 System modeling, where the software design is explicitly
documented as a set of graphical models, and the links
between the requirements and these models are
documented.

Dependable process activities
 Design and program inspections, where the different
descriptions of the system are inspected and checked by
different people.
 Static analysis, where automated checks are carried out
on the source code of the program.
 Test planning and management, where a comprehensive
set of system tests is designed.
 The testing process has to be carefully managed to demonstrate
that these tests provide coverage of the system requirements
and have been correctly applied in the testing process.

Dependable processes and agility
 Dependable software often requires certification so both
process and product documentation has to be produced.
 Up-front requirements analysis is also essential to
discover requirements and requirements conflicts that
may compromise the safety and security of the system.
 These conflict with the general approach in agile
development of co-development of the requirements and
the system and minimizing documentation.

Dependable processes and agility
 An agile process may be defined that incorporates
techniques such as iterative development, test-first
development and user involvement in the development
team.
 So long as the team follows that process and documents
their actions, agile methods can be used.
 However, additional documentation and planning is
essential so ‘pure agile’ is impractical for dependable
systems engineering.

Formal methods and dependability

Formal specification
 Formal methods are approaches to software
development that are based on mathematical
representation and analysis of software.
 Formal methods include
 Formal specification;
 Specification analysis and proof;
 Transformational development;
 Program verification.
 Formal methods significantly reduce some types of
programming errors and can be cost-effective for
dependable systems engineering.

Formal approaches
 Verification-based approaches
 Different representations of a software system such as a
specification and a program implementing that specification are
proved to be equivalent.
 This demonstrates the absence of implementation errors.
 Refinement-based approaches
 A representation of a system is systematically transformed into
another, lower-level represention e.g. a specification is
transformed automatically into an implementation.
 This means that, if the transformation is correct, the
representations are equivalent.

Use of formal methods
 The principal benefits of formal methods are in reducing
the number of faults in systems.
 Consequently, their main area of applicability is in
dependable systems engineering. There have been
several successful projects where formal methods have
been used in this area.
 In this area, the use of formal methods is most likely to
be cost-effective because high system failure costs must
be avoided.

Classes of error
 Specification and design errors and omissions.
 Developing and analysing a formal model of the software may
reveal errors and omissions in the software requirements. If the
model is generated automatically or systematically from source
code, analysis using model checking can find undesirable states
that may occur such as deadlock in a concurrent system.
 Inconsistences between a specification and a program.
 If a refinement method is used, mistakes made by developers
that make the software inconsistent with the specification are
avoided. Program proving discovers inconsistencies between a
program and its specification.

Benefits of formal specification
 Developing a formal specification requires the system
requirements to be analyzed in detail. This helps to detect
problems, inconsistencies and incompleteness in the
requirements.
 As the specification is expressed in a formal language, it can
be automatically analyzed to discover inconsistencies and
incompleteness.
 If you use a formal method such as the B method, you can
transform the formal specification into a ‘correct’ program.
 Program testing costs may be reduced if the program is
formally verified against its specification.

Acceptance of formal methods
 Formal methods have had limited impact on practical
software development:
 Problem owners cannot understand a formal specification and so
cannot assess if it is an accurate representation of their
requirements.
 It is easy to assess the costs of developing a formal specification
but harder to assess the benefits. Managers may therefore be
unwilling to invest in formal methods.
 Software engineers are unfamiliar with this approach and are
therefore reluctant to propose the use of FM.
 Formal methods are still hard to scale up to large systems.
 Formal specification is not really compatible with agile
development methods.

Key points
 System dependability is important because failure of
critical systems can lead to economic losses, information
loss, physical damage or threats to human life.
 The dependability of a computer system is a system
property that reflects the user’s degree of trust in the
system. The most important dimensions of dependability
are availability, reliability, safety, security and resilience.
 Sociotechnical systems include computer hardware,
software and people, and are situated within an
organization. They are designed to support
organizational or business goals and objectives.

Key points
 The use of a dependable, repeatable process is
essential if faults in a system are to be minimized. The
process should include verification and validation
activities at all stages, from requirements definition
through to system implementation.
 The use of redundancy and diversity in hardware,
software processes and software systems is essential to
the development of dependable systems.
 Formal methods, where a formal model of a system is
used as a basis for development help reduce the number
of specification and implementation errors in a system.

Ch10 dependable systems

More Related Content

What's hot (20)

Viewers also liked (6)

Similar to Ch10 dependable systems (20)

More from software-engineering-book (10)

Recently uploaded (20)

Ch10 dependable systems