chemistry project on preparation of potash alum

chemistry project on preparation of potash alum

• 1.
  [Project File ]-2015-2016 Name- TARUN KUMAR RANA ROLL NO - 41 Class -XII –A Submitted To:- Submitted By:- Mam. Mamta Saini Tarun Kumar Rana
• 2.
  Certificate This is tocertify that this project work is submitted by TARUN KUMAR RANA to the Chemistry department, ST. MARY’S CONVENT SENIOR SECONDARY SCHOOL, GAJRAULA was carried out by him under the guidance & supervision during academicyear2015-2016. …………………….. TeacherIn-charge ………………………… …………………. Examiner’s Signature Pincipal
• 3.
  INDEX 1) Declaration 2) Acknowledgement 3)Introduction 4) Aim 5) Requirements 6) Theory 7) Reactions 8) Procedure 9) Observations 10) Result 11) Bibliography
• 4.
  DECLARATION I do herebydeclare that this project work has been originally carried under the guidance and supervision of Mam. Mamta Saini, head of chemistry department, ST. Mary’s Convent Senior Secondary School, Gajraula. Name :- Tarun Kumar Rana Board Roll No.-
• 5.
  ACKNOWLEDGEMENT I would liketo express my special thanks of gratitude to my teacher Mam. Mamta Saini who gave me the golden opportunity to do this wonderful project on the topic Preparation of Potash alum from scrap Aluminium , which also helped me in doing a lot of Research and i came to know about so many new things I am really thankful to them. Secondly i would also like to thank my parents and friends who helped me a lot in finalizing this project within the limited time frame.
• 6.
  INTRODUCTION Aluminium because ofits low density, high tensile strength and resistance to corrosion is widely used for the manufacture of aeroplanes, automobiles lawn furniture as well as for aluminium cans. Being good conductor of electricity it is used for transmission of electricity. Aluminium is also used for making utensils. The recycling of aluminium cans and other aluminium products is a very positive contribution to saving our natural resources. Most of the recycled aluminium is melted and recast into other aluminium metal products or used in the production of various aluminium compounds, the most common of which are the alums. Alums are double sulphates having
• 7.
  General formula ---- X= Monovalent cation ; M = Trivalent cation Some important alum and their names are given below: Potash alum is used in papermaking, in fire extinguishers, in food stuffs and in purification of water soda alum used in baking powders and chrome alum is used in tanning leather and water proofing fabrics. In addition to these primary uses, alum is also used as
• 8.
  1) An astringenta substance or preparation that draws together or constricts body tissues and is effective in stopping the flow of blood or other secretions. Alum has also been used by conventional hairdressers for treating shaving cuts. 2) A mordant substances used in dyeing to fix certain dyes on cloth. Either the mordant (if it is colloidal) or a colloid produced by the mordant adheres to the fiber, attracting and fixing the colloidal mordant dye. The insoluble, colored precipitate that is formed is called a lake. Alum is a basic mordant used for fixing acid dyes. 3) For the removal of phosphate from natural and waste waters the aluminium ions of alum combine with the orthophosphate around pH 6 to form the solid aluminum hydroxyphosphate which is precipitated. 4) For fireproofing fabrics The major uses of alums are based on two important
• 9.
  properties, namely precipitationof Al(OH)3 and those related to the acidity created by the production of hydrogen ions. AIM- To prepare potash alum from aluminium scrap REQUIREMENT 250 ml flask Funnel Beaker Scrap aluminium or cola can Potassium hydroxide solution (KOH) 6 M Sulphuric Acid (H2SO4) Water Bath Ethanol THEORY
• 10.
  Aluminum metal istreated with hot aqueous KOH solution. Aluminium dissolves as potassium aluminate,KAl(OH)4, salt. Potassium aluminate solution on treatment with dil. Sulphuric acid first gives precipitate Al(OH)3, which dissolves on addition of small excess of H2SO4 and heating. The resulting solution is concentrated to near saturation and cooled. On cooling crystals of potash alum crystallize out.
• 11.
  REACTIONS
• 12.
  PROCEDURE Clean a smallpiece of scrap aluminium with steel wool and cut it into very small pieces. Aluminium foil may be taken instead of scrap aluminium. Put the small pieces of scrap aluminium or aluminium foil (about 1.00g) into a conical flask and add about 50 ml of 4 M KOH solution to dissolve the aluminium. The flask may be heated gently in order to facilitate dissolution. Since during this step hydrogen gas is evolved this step must be done in a well ventilated area. Continue heating until all of the aluminium reacts.
• 13.
  Filter the solutionto remove any insoluble impurities and reduce the volume to about 25 ml by heating. Allow the filtrate to cool. Now add slowly 6 M H2SO4 until insoluble Al(OH)3 just forms in the solution. Gently heat the mixture until the Al(OH)3 precipitate dissolves. Cool the resulting solution in an ice-bath for about 30 minutes whereby alum crystals should separate out. For better results the solution may be left overnight for crystallization to continue. In case crystals do not form the solution may be further concentrated and cooled again. Filter the crystals from the solution using vacuum pump, wash the crystals with 50/50 ethanol-water mixture. Continue applying the vacuum until the crystals appear dry. Determine the mass of alum crystals.
• 14.
  OBSERVATION Mass of aluminiummetal =…2.39 g Mass of potash alum =……4.67….g Theoretical yield of potash alum =…5.43 g Percent yield = 86 % RESULT:- Potash alum of 86 % yield was prepared from aluminium scrap.
• 15.
  { BIBLIOGRAPHY } iCBSE.com Wikipedia.com Chemicalland.com books.google.co.in