Control Memory.pptx

Control Memory
G.Chandraprabha, M.Sc., M.Phil.,
Assistant Professor of IT

Micro Programmed Control
Control Memory

Control Memory
 The function of the control unit in a digital computer is to initiate
sequences of micro operations.
 The number of different types of micro operations that are available
in a given system is finite.
 The complexity of the digital system is derived from the number of
sequences of micro operations that are performed.

 When the control signals are generated by hardware using
Conventional logic design techniques, the control unit is said to be
hardwired.
 Microprogramming is a second alternative for designing the control
unit of a digital computer.
 The principle of microprogramming is an elegant and systematic
method for controlling the micro operation sequences in a digital
computer.

Control Word
• The control variables at any given time can be represented by a
string Of 1’s and 0’s called a control word.
• As such, control words can be programmed to perform various
Operations on the components of the system.
• A control unit whose binary control variables are stored in memory
is called micro programmed control unit .

Micro Instruction
 Each word in control memory contains within it a microinstruction .
 The micro instruction specifies one or more micro operations
for the system.
Micro Program
 The content of the words in ROM are fixed and cannot be altered
by simple programming since no writing capability is available
in the ROM.

 ROM words are made permanent during the hardware production
of the unit.
 A more advanced development known as dynamic
microprogramming permits a micro program to be loaded initially
from an auxiliary memory such as a magnetic disk.
 Control units that use dynamic microprogramming employ a
writable control memory.

Main memory
 The main memory is available to the user for storing the programs.
 The contents of main memory may alter when the data
are manipulated and every time that the program is changed.
 The user’s program in main memory consists of machine
instructions and data.

Control memory
 The control memory holds a fixed micro program that cannot be
altered by the occasional user.
 The micro program consists of microinstructions that specify
various internal control signals for execution of register
micro operations.

 Each machine instruction initiates a series of microinstructions
in control memory.
 These micro instructions generate the micro operations
to fetch the instruction from main memory; to evaluate the
effective address, to execute the operation specified by the
instruction, and to return control to the fetch phase in order to
repeat the cycle for the next instruction.

Control memory address register
 The control memory address register specifies the address of
the microinstruction, and the control data register holds the
micro instruction read from memory.
 The microinstruction contains a control word that specifies one
or more micro operations for the data processor.
 Once these operations are executed, the control must
determine the next address.

Micro program sequencer
 For this reason it is necessary to use some bits of the present
microinstruction to control the generation of the address of
the next microinstruction.
 While the micro operations are being executed, the next
address is computed in the next address generator circuit
and then transferred into the control address register to read
the next microinstruction.

Pipeline register
 The control data register holds the present microinstruction while
the next address is computed and read from memory. The data
register is sometimes called a pipeline register.
 It allows the execution of the micro operations specified by the
control word simultaneously with the generation of the next micro
instruction. This configuration requires a two-phase clock, with
one clock applied to the address register and the other to the data

 The system can operate without the control data register by
applying a single-phase clock to the address register. The control
word and next-address information are taken directly from the
control memory.
 The content of the specified word in ROM remains in the output
wires as long as its address value remains in the address register.
no read signal is needed as in a random-access memory.

Advantage of Micro programmed control
 The main advantage of the micro programmed control is the
fact that once the hardware configuration is established, there
should be no need for further hardware or wiring changes.
 The most computers based on the Reduced instruction set
computer(RISC) architecture concept use hardwired control
rather than a control memory with a micro program.

Control Memory.pptx

More Related Content

What's hot (20)

Similar to Control Memory.pptx (20)

More from V.V.Vanniaperumal College for Women (20)

Recently uploaded (20)

Control Memory.pptx