DETECTION OF AIR POLLUTANT USING ZIGBEE

International Journal of Ad hoc, Sensor & Ubiquitous Computing (IJASUC) Vol.4, No.4, August 2013
DOI : 10.5121/ijasuc.2013.4405 59
DETECTION OF AIR POLLUTANT USING
ZIGBEE
Darshana N. Tambe and Ms. Nikita Chavan
Dept. of Computer Science and Engineering,
G.H. Raisoni College of Engineering, Nagpur, India
darshana_tahoo.inambe143@y
niki.chavan@gmail.com
ABSTRACT
In this paper we describe use of ZigBee, sensor nodes, GPS to construct distributed system for urban air
pollution monitoring and control. Zigbee module and pollution server is interfaced with GPS system to
display real-time pollutants levels and there location on a 24h/7 days basis.
KEYWORDS
ZigBee, Sensor node, Air pollution, GPS
1. INTRODUCTION
With fast development of the industrialization and urbanization process in the world,
environmental pollution problems become more common. At present environment contains air
pollution, water pollution and soil pollution worldwide. Air pollution is the presence of
contaminants or pollutant substances in the air that interfere with human health or welfare, or
produce other harmful environmental effects. The World Health Organization states that 2.4
million people die each year because of polluted air. Based on the fact above mentioned, the
human should focus on designing air pollution monitoring system.
Pure air and human health goes Hand in Hand. Air pollution is harmful for human health. It
causes difficulty in breathing, wheezing, coughing and many respiratory problems. Currently
there are two methods to monitor air pollution at present. First one is nonautomatic and other is
automatic. The advantages of nonautomatic sampling method are monitoring devices is simple
and inexpensive but it monitors the parameters for certain period. It does not provide the real time
monitoring. While the nonautomatic sampling method provides the real time monitoring of
harmful substances in the air. The nonautomatic sampling method uses the sensors to monitor the
parameters, and send the data to central control center.
At present, for monitoring air pollution in wireless network the system includes the GSM, GPRS,
etc. But these wireless nodes installation and maintenance are costly. That’s why wireless sensor

60
network have been rapidly developed. The wireless sensor network has many advantages
application in military and industries.
Many air pollution systems which monitor air pollution due to hazardous health problems of this
the government of Tiwan use various air quality monitoring systems [1]. In this they use MAC
medium access control protocol for monitoring air quality in wireless sensor network.
Khunarak et al. proposed E-nose electronic nose architecture for real time monitoring of indoor
chemical polluted materials such as CO, NO2. These chemical materials are highly toxic and
cause respiratory failure [2]. The ARIMA prediction model is used to monitor air quality in
wireless sensor network. The ARIMA model predicts the carbon dioxide level in the air in [3]. A
conceptual framework for the deployment of wireless sensor network for environment monitoring
of Bangalore urban city is proposed in [4]. An outdoor air pollution monitoring system which
uses ZigBee networks for monitoring air pollution in ubiquitous cities was reported in [5]. This
system integrates wireless sensor board and CO2 sensors which also integrates with the dust,
temperature and humidity and ZigBee module. In China, Zhang Qian et al. compared the
advantages of ZigBee with Wi-Fi and Bluetooth and give a wireless solution based on ZigBee
technology for greenhouse monitoring [6]. Although some authors use ZigBee to monitor air
pollution, its application in air pollution monitoring stay little.
The exploitation of the technology of the wireless sensor network and ZigBee module, focusing
on the air pollution monitoring system.
2. AIR QUALITY
The air pollution means presence of one or more contaminants for temporal duration that can
become injurious to human life, vegetable, and animal. The air contaminants include smokes,
gases, dusts, paper hashes, poisonous chemical products and many polluted materials.
Certain polluted materials react with each other and produces other pollutants. These pollutants
called as secondary pollutants. Carbon monoxide and nitrogen dioxide produced by automobiles
motors, lead to the development of ozone.
Air pollution has consequences for human health. It causes respiratory problems and even death.
It also contributes the acid rain and reduction of ozone layer.
The proposed system is able to measuring the following gases in the environment.
• Carbon Monoxide (CO) – Carbon monoxide is a pale, flavorless, unscented nonirritating
gas produced when sources of carbon, such as fuels or wood are burned. Common
sources of human exposure include, smoke inhalation from fires automobile exhaustion,
cigarette smoke. It causes respiratory problems.
• Sulphur Dioxide (SO2) – Sulphur Dioxide is pale gas, detectable by the different odor
and flavor. It is due to fossil fuels burning. In high concentrations may cause respiratory
problems, in sensitive groups, like asthmatics. It contributes to acid rains.

61
• Nitrogen Dioxide (NO2) – Nitrogen Dioxide is a brownish gas, easily noticeable for its
smell, very acidic and highly oxidant. It is produced because of fossil fuels burning. It
also contributes to acid rain.
3. ZIGBEE STANDARD
The ZigBee is the small range, low power, low data rate wireless networking technology for
many wireless applications. It is present at the bottom three layers i.e. physical, data link, and
network layer. This is the recently published IEEE 802.15.4 standards for personal area networks.
ZigBee is embattled at radio-frequency (RF) applications that require a low data rate, extended
battery life, and secure networking. ZigBee is a wireless technology developed as an open global
standard to address the unique needs of low-cost, low-power, wireless sensor networks.
Figure 1. ZigBee Architecture
ZigBee network layer supports star, mesh and tree topologies. The ZigBee coordinator is
responsible for initiating and maintaining the devices present in the network and other end
devices directly communicate with the ZigBee coordinator.
The IEEE 802.15.4 (ZigBee) standard provides three frequency bands for operation: these are
868MHz, 916MHz, and 2.4GHz for ZigBee. 868MHz band used in only Europe and has the
20Kbps data rate of transmission and contain only one channel with BPSK modulation technique.
916MHz band is used in Americas having the 40Kbps data rate of transmission and contain 10
channels with BPSK modulation technique. 2.4GHz frequency bands used throughout the world
because of ISM (Industrial, Scientific, Medical) band. It has 250Kbps data rate of transmission
and 16 channels with O-QPSK modulation technique. Transmission distance is within the range
from 30 meters in an indoor non-line of sight of environment and 100 meters in line of sight
environment. The range problem can be solved by using various routing algorithms at the
network layer.
4. HARDWARE ARCHITECTURE
The proposed system is designed by integrating the following hardware modules as shown in
figure.

62
Figure 2. System H/W Basic Building Block
Here two communication protocols are used for wireless communication. One is UART and other
is ZigBee. UART is nothing but Universal Asynchronous Receiver/Transmitter. UART used for
wireless communication. UART supports serial communication which is required for wireless
communication. In proposed system CO, NO2 and SO2 sensors are connected to the timer
switching circuits which is later connected to the programmer logic circuits Microcontroller.
Analog to digital ADC is connected to the Microcontroller circuit which converts analog signal
coming from the sensors into digital form and send the digital data to client side.
ZigBee communication protocol has ZigBee coordinator and ZigBee end device. ZigBee
coordinator is responsible for initiating and maintaining the the devices on the network and other
end device nothing but the ZigBee end device is directly communicate with the ZigBee
coordinator. The central server is a standard personal computer. The pollution sensors are
conncted to to the ZigBee module via RS -232 communication standard. The pollution
information send from each ZigBee end devices are collected to ZigBee coordinator module and
then data are saved to the central server.
5. CONCLUSION
The main purpose of this paper is to provide an overview of urban air pollution monitoring
application. Our work is enabled by ZigBee ,pollution sensors and database sensors i.e. attached
to pollution server for storing the pollutants levels for future usage by various clients for
measuring pollutants in air accurately at short intervals. The system measures air pollutant gases

63
such as CO, NO2, and SO2. This paper will give clear idea to move towards real time measuring
in an urban area to ultimately improve quality of life on earth.
REFERENCES
[1] Hsu-Cheng Lu , Jen-Hao Liu , Joe-Air Jiang ; Tzai- Hung Wen , Chih-Hong Sun , Jehn-Yih Juang ,
“Apllication Of A Reliable MAC Protocol For The Urban Air Quality Monitoring System Based On
The Wireless Sensor Network”, IEEE Conference, pp. 1-6, March 2012.
[2] Khunarak, C. , Lutz, M. , Kerdcharoen, T. , “WiFi Electronic Nose For Indoor Air Monitoring” IEEE
Conference, pp. 1-4, May 2012.
[3] Chung-Chih Lin , Ren-Guey Lee, Chao-Heng Tseng, Shi-Ping Liu , “Wireless Sensing System For
Prediction Indoor Air Quality”, HSIC, IEEE Conference, pp. 1-3, May 2012.
[4] Chakravarthi, Veena S., “Conceptual Framework of Smart WSN for Bangalore Urban Environment
Monitoring”, IEEE Conference, pp.59-63, July2012.
[5] Jong-Won Kwon, Yong-Man Park, Sang-Jun Koo, Hiesik Kim, “Design of Air Polltuon Monitoring
System Using Zigbee Networks for Ubiquitous-City”, In Preceedings Of the 2007 International
Conference on Convergence Information Technology, pp.1024-1031, 2007.
[6] Zhang Qian, Yang Xiang-Long, Zhou Yi-Ming, Wang Li-Ren, Guo Xi-Shan, “ A Wireless Solution
For Greenhouse Monitoring And Control System Based On Zigbee Technology”, J. Zhejiang Univ
Sci A, vol. 8, pp. 1584-1587, 2007
[7] Kavi K. Khedo, Rajiv Perseedoss and Avinash Mungur, “A Wireless Sensor Network Air Pollution
Monitoring System”,International Journal of Wireless and Mobile Network (IJWMN), Vol. 2,No.2,
May 2010
[8] A. R. Al-Ali,, Imran Zualkernan, and Fadi Aloul, “A Mobile GPRS-Sensors Array for Air Pollution
Monitoring”, IEEE Sensor Journal, Vol. 10, No. 10, October 2011
[9] Jong-Won Kwon*,Yong-Man Park, Sang-Jun Koo, Hiesik Kim, “Design of Air Pollution Monitoring
System using ZigBee Networks for Ubiquitous-City”, International Conference on Convergence
Information Technology, 2007
[10] Halit Eren, Ahmed Al-Ghamdi, Jinhua Luo, “Application of ZigBee for Pollution Monitoring Caused
by Automobile Exhaust Gases”, IEEE Sensors Applications Symposium New Orleans, LA, USA -
February 17-19, 2009
[11] Han Zhi-gang, Cui Cai-hui, “The Application of Zigbee Based Wireless Sensor Network and GIS in
the Air Pollution Monitoring”, International Conference on Environmental Science and Information
Application Technology, 2009

DETECTION OF AIR POLLUTANT USING ZIGBEE

More Related Content

What's hot (20)

Similar to DETECTION OF AIR POLLUTANT USING ZIGBEE (20)

Recently uploaded (20)

DETECTION OF AIR POLLUTANT USING ZIGBEE