![Dicom 2010[1]](https://image.slidesharecdn.com/dicom20101-101227001250-phpapp01/85/Dicom-2010-1-16-320.jpg)
![Dicom 2010[1]](https://image.slidesharecdn.com/dicom20101-101227001250-phpapp01/85/Dicom-2010-1-23-320.jpg)
Dicom 2010[1]
- 1. By:Dr. WalidSamirBDS, MS, MHPELecturer, Oral Surgery Department
- 2. Digital Imaging and Communications in Medicine (DICOM) is a standard for handling, storing, printing, and transmitting information in medical imaging.
- 3. The goals of DICOM are to achieve compatibility and improve workflow efficiency between imaging systems and other information systems in health care. It includes a file format definition and a network communications protocol between systems.
- 4. DICOM enables the integration of scanners, servers, workstations, printers, and network hardware from multiple manufacturers into a Picture Archiving and Communication System(PACS). The different devices come with DICOM conformance statements which clearly state the DICOM classes they support.DICOM has been widely adopted by hospitals and is making inroads in smaller applications like dentists' and doctors' offices.
- 5. DICOMSYSTEM
- 6. Every major vendor of diagnostic medical imaging in the world has incorporated some form of the DICOM standard into its product design, and most professional societies throughout the world have supported and are participating in enhancement of the standard.
- 7. History of DICOMDICOM is the third version of a standard developed by American College of Radiology (ACR) and National Electrical Manufacturers Association(NEMA).In the beginning of the 1980s it was almost impossible for anyone other than manufacturers of CT or MRI devices to decode the images that the machines generated.
- 8. ACR and NEMA joined forces and formed a standard committee in 1983. Their first standard, ACR/NEMA 300, was released in 1985. Very soon after its release, it became clear that improvements were needed.
- 9. In 1988 the second version was released. This version gained more acceptance among vendors.Commercial equipment supporting ACR/NEMA 2.0 was presented at the annual meeting of the Radiological Society of North America (RSNA) in 1990. Many soon realized that the second version also needed improvement.
- 10. In 1993 the third version of the standard was released. Its name was then changed to DICOM so as to improve the possibility of international acceptance as a standard.It has been constantly updated and extended since 1993. Instead of using the version number the standard is often version-numbered using the release year, like "the 2007 version of DICOM".
- 11. Scope and field of applicationDICOM facilitates interoperability of medical imaging equipment by specifying the following:1 - Set of protocols of the imaging devices are compatible with the system to complete the network connection.2 - Indications of the command and information that can be exchanged using these protocols.
- 12. 3-Set of storage services for devices that must be compatible with the system and build a directory to facilitate access to medical images and related information.4- The information necessary to ensure compatibility with the system.
- 13. Affiliated system DICOM to a field medical informatics, which reflects the exchange of digital information between devices, medical imaging and other systems in this field, including that such equipment can operate jointly with Other medical devices.
- 14. Goals of the DICOM standardDICOM facilitates interoperability of compatible devices. In particular, it : Addresses the semantics of Commands and associated data. For devices to interact, there must be standards on how devices are expected to react to Commands and associated data, not just the information which is to be moved between devices - Addresses the semantics of file services, file formats and information directories necessary for off-line communication.
- 15. -Clear in defining the requirements of compatibility between the applications of the system, and especially compatibility status information to determine the effectiveness of the expected interoperability with other devices.- Facilitate operation in a networked environment.- This system is based to allow introduction of new services making it easier to support future medical imaging applications.- Makes use of existingapplicable international standards.
- 17. DICOM Data FormatDICOM differs from some, but not all, data formats in that it groups information into data sets. That means that a file of a periapical X-Ray image, for example, actually contains the patient ID within the file, so that the image can never be separated from this information by mistake.
- 18. DICOM ServicesDICOM consists of many different services, most of which involve transmission of data over a network, and the file format below is a later and relatively minor addition to the standard.Store:The DICOM Store service is used to send images or other persistent objects (structured reports, etc.) to a PACS or workstation.Storage Commitment:The DICOM storage commitment service is used to confirm that an image has been permanently stored by a device (either on redundant disks or on backup media, e.g. burnt to a CD).
- 19. Retrieve:This enables a workstation to find lists of images or other such objects and then retrieve them from a PACS.Modality WorklistThis enables a piece of imaging equipment (a modality) to obtain details of patients and scheduled examinations electronically, avoiding the need to type such information multiple times (and the mistakes caused by retyping).
- 20. Modality Performed Procedure Step: (MPPS)A complementary service to Modality Worklist, this enables the modality to send a report about a performed examination including data about the images acquired, beginning time, end time, and duration of a study, dose delivered, etc. It helps give the radiology department a more precise handle on resource use. This service allows a modality to better coordinate with image storage servers by giving the server a list of objects to send before or while actually sending such objects.
- 21. PrintingThe DICOM Printing service is used to send images to a DICOM Printer, normally to print an "X-Ray" film. There is a standard calibration (defined in DICOM Part 14) to help ensure consistency between various display devices, including hard copy printout.Off-line Media (DICOM Files)It describes how to store medical imaging information on removable media.
- 24. Examples of Modalities supported in DICOM for dental field are:CT = Computed TomographyDS = Digital SubtractionDX = Digital RadiographyHC = Hard CopyMR = Magnetic resonanceNM = Nuclear MedicineOT = OtherPT = Positron Emission Tomography (PET)
- 25. RG = Radiographic Imaging (conventional film screen)RTDOSE = Radiotherapy DoseRTIMAGE = Radiotherapy ImageRTPLAN = Radiotherapy PlanRTSTRUCT = Radiotherapy Structure SetSR = Structured ReportingST = Single-photon Emission Computed Tomography RetiredUS = UltrasoundXC = eXternal Camera
- 26. References:Digital Imaging and Communications in Medicine (DICOM) Part 1: Introduction and Overview. National Electrical Manufacturers Association. 2006. pp. 11.