DS Complete notes for Computer science and Engineering

DATA STRUCTURES USING
“C”
LECTURE NOTES
Prepared by
Dr. Subasish Mohapatra
Department of Computer Science and Application
College of Engineering and Technology, Bhubaneswar
Biju Patnaik University of Technology, Odisha

SYLLABUS
BE 2106 DATA STRUCTURE (3-0-0)
Module – I
Introduction to data structures: storage structure for arrays, sparse matrices, Stacks and
Queues: representation and application. Linked lists: Single linked lists, linked list
representation of stacks and Queues. Operations on polynomials, Double linked list,
circular list.
Module – II
Dynamic storage management-garbage collection and compaction, infix to post fix
conversion, postfix expression evaluation. Trees: Tree terminology, Binary tree, Binary
search tree, General tree, B+ tree, AVL Tree, Complete Binary Tree representation,
Tree traversals, operation on Binary tree-expression Manipulation.
Module –III
Graphs: Graph terminology, Representation of graphs, path matrix, BFS (breadth first
search), DFS (depth first search), topological sorting, Warshall’s algorithm (shortest
path algorithm.) Sorting and Searching techniques – Bubble sort, selection sort,
Insertion sort, Quick sort, merge sort, Heap sort, Radix sort. Linear and binary search
methods, Hashing techniques and hash functions.
Text Books:
1. Gilberg and Forouzan: “Data Structure- A Pseudo code approach with C” by
Thomson publication
2. “Data structure in C” by Tanenbaum, PHI publication / Pearson publication.
3. Pai: ”Data Structures & Algorithms; Concepts, Techniques & Algorithms ”Tata
McGraw Hill.
Reference Books:
1. “Fundamentals of data structure in C” Horowitz, Sahani & Freed, Computer Science
Press.
2. “Fundamental of Data Structure” ( Schaums Series) Tata-McGraw-Hill.

CONTENTS
Lecture-01 Introduction to Data structure
Lecture-02 Search Operation
Lecture-03 Sparse Matrix and its representations
Lecture-04 Stack
Lecture-05 Stack Applications
Lecture-06 Queue
Lecture-07 Linked List
Lecture-08 Polynomial List
Lecture-09 Doubly Linked List
Lecture-10 Circular Linked List
Lecture-11 Memory Allocation
Lecture-12 Infix to Postfix Conversion
Lecture-13 Binary Tree
Lecture-14 Special Forms of Binary Trees
Lecture-15 Tree Traversal
Lecture-16 AVL Trees
Lecture-17 B+-tree
Lecture-18 Binary Search Tree (BST)
Lecture-19 Graphs Terminology
Lecture-20 Depth First Search
Lecture-21 Breadth First Search
Lecture-22 Graph representation
Lecture-23 Topological Sorting
Lecture-24 Bubble Sort
Lecture-25 Insertion Sort
Lecture-26 Selection Sort
Lecture-27 Merge Sort
Lecture-28 Quick sort
Lecture-29 Heap Sort
Lecture-30 Radix Sort
Lecture-31 Binary Search
Lecture-32 Hashing
Lecture-33 Hashing Functions

Module-1
Lecture-01
Introduction to Data structures
In computer terms, a data structure is a Specific way to store and organize data in a
computer's memory so that these data can be used efficiently later. Data may be
arranged in many different ways such as the logical or mathematical model for a
particular organization of data is termed as a data structure. The variety of a particular
data model depends on the two factors -
 Firstly, it must be loaded enough in structure to reflect the actual relationships of
the data with the real world object.
 Secondly, the formation should be simple enough so that anyone can efficiently
process the data each time it is necessary.
Categories of Data Structure:
The data structure can be sub divided into major types:
 Linear Data Structure
 Non-linear Data Structure
Linear Data Structure:
A data structure is said to be linear if its elements combine to form any specific order.
There are basically two techniques of representing such linear structure within memory.
 First way is to provide the linear relationships among all the elements
represented by means of linear memory location. These linear structures are termed as
arrays.
 The second technique is to provide the linear relationship among all the elements
represented by using the concept of pointers or links. These linear structures are
termed as linked lists.
The common examples of linear data structure are:
 Arrays
 Queues
 Stacks
 Linked lists
Non linear Data Structure:
This structure is mostly used for representing data that contains a hierarchical
relationship among various elements.
Examples of Non Linear Data Structures are listed below:
 Graphs
 family of trees and
 table of contents
Tree: In this case, data often contain a hierarchical relationship among various
elements. The data structure that reflects this relationship is termed as rooted tree
graph or a tree.

Graph: In this case, data sometimes hold a relationship between the pairs of elements
which is not necessarily following the hierarchical structure. Such data structure is
termed as a Graph.
Array is a container which can hold a fix number of items and these items should be of
the same type. Most of the data structures make use of arrays to implement their
algorithms. Following are the important terms to understand the concept of Array.
 Element − Each item stored in an array is called an element.
 Index − Each location of an element in an array has a numerical index, which is
used to identify the element.
ArrayRepresentation:(Storage structure)
Arrays can be declared in various ways in different languages. For illustration, let's take
C array declaration.
Arrays can be declared in various ways in different languages. For illustration, let's take
C array declaration.
As per the above illustration, following are the important points to be considered.
 Index starts with 0.
 Array length is 10 which means it can store 10 elements.
 Each element can be accessed via its index. For example, we can fetch an
element at index 6 as 9.
BasicOperations
Following are the basic operations supported by an array.
 Traverse − print all the array elements one by one.
 Insertion − Adds an element at the given index.
 Deletion − Deletes an element at the given index.
 Search − Searches an element using the given index or by the value.
 Update − Updates an element at the given index.
In C, when an array is initialized with size, then it assigns defaults values to its
elements in following order.
Data Type Default Value
bool false

char 0
int 0
float 0.0
double 0.0f
void
wchar_t 0
InsertionOperation
Insert operation is to insert one or more data elements into an array. Based on the
requirement, a new element can be added at the beginning, end, or any given index of
array.
Here, we see a practical implementation of insertion operation, where we add data at
the end of the array −
Algorithm
Let LA be a Linear Array (unordered) with N elements and K is a positive integer such
that K<=N. Following is the algorithm where ITEM is inserted into the Kth
position of LA
−
1. Start
2. Set J = N
3. Set N = N+1
4. Repeat steps 5 and 6 while J >= K
5. Set LA[J+1] = LA[J]
6. Set J = J-1
7. Set LA[K] = ITEM
8. Stop
Example
Following is the implementation of the above algorithm −
Live Demo
#include <stdio.h>
main() {
int LA[] = {1,3,5,7,8};
int item = 10, k = 3, n = 5;
int i = 0, j = n;
printf("The original array elements are :n");
for(i = 0; i<n; i++) {
printf("LA[%d] = %d n", i, LA[i]);
}

n = n + 1;
while( j >= k) {
LA[j+1] = LA[j];
j = j - 1;
}
LA[k] = item;
printf("The array elements after insertion :n");
for(i = 0; i<n; i++) {
}
}
When we compile and execute the above program, it produces the following result −
Output
The original array elements are :
LA[0] = 1
LA[1] = 3
LA[2] = 5
LA[3] = 7
LA[4] = 8
The array elements after insertion :
LA[0] = 1
LA[1] = 3
LA[2] = 5
LA[3] = 10
LA[4] = 7
LA[5] = 8
Deletion Operation
Deletion refers to removing an existing element from the array and re-organizing all
elements of an array.
Algorithm
Consider LA is a linear array with N elements and K is a positive integer such
that K<=N. Following is the algorithm to delete an element available at the Kth
position
of LA.
1. Start
2. Set J = K
3. Repeat steps 4 and 5 while J < N
4. Set LA[J] = LA[J + 1]
5. Set J = J+1
6. Set N = N-1
7. Stop
Example

Lve Demo
#include <stdio.h>
void main() {
int LA[] = {1,3,5,7,8};
int k = 3, n = 5;
int i, j;
for(i = 0; i<n; i++) {
}
j = k;
while( j < n) {
LA[j-1] = LA[j];
j = j + 1;
}
n = n -1;
printf("The array elements after deletion :n");
for(i = 0; i<n; i++) {
}
}
Output
LA[0] = 1
LA[1] = 3
LA[2] = 5
LA[3] = 7
LA[4] = 8
The array elements after deletion :
LA[0] = 1
LA[1] = 3
LA[2] = 7
LA[3] = 8

Lecture-02
SearchOperation
You can perform a search for an array element based on its value or its index.
Algorithm
that K<=N. Following is the algorithm to find an element with a value of ITEM using
sequential search.
1. Start
2. Set J = 0
3. Repeat steps 4 and 5 while J < N
4. IF LA[J] is equal ITEM THEN GOTO STEP 6
5. Set J = J +1
6. PRINT J, ITEM
7. Stop
Example
Live Demo
#include <stdio.h>
void main() {
int LA[] = {1,3,5,7,8};
int item = 5, n = 5;
int i = 0, j = 0;
for(i = 0; i<n; i++) {
}
while( j < n){
if( LA[j] == item ) {
break;
}
j = j + 1;
}
printf("Found element %d at position %dn", item, j+1);
}
Output
LA[0] = 1
LA[1] = 3
LA[2] = 5

LA[3] = 7
LA[4] = 8
Found element 5 at position 3
UpdateOperation
Update operation refers to updating an existing element from the array at a given index.
Algorithm
that K<=N. Following is the algorithm to update an element available at the Kth
position
of LA.
1. Start
2. Set LA[K-1] = ITEM
3. Stop
Example
Live Demo
#include <stdio.h>
void main() {
int LA[] = {1,3,5,7,8};
int k = 3, n = 5, item = 10;
int i, j;
for(i = 0; i<n; i++) {
}
LA[k-1] = item;
printf("The array elements after updation :n");
for(i = 0; i<n; i++) {
}
}
Output
LA[0] = 1
LA[1] = 3
LA[2] = 5
LA[3] = 7
LA[4] = 8

The array elements after updation :
LA[0] = 1
LA[1] = 3
LA[2] = 10
LA[3] = 7
LA[4] = 8

Lecture-03
Sparse Matrix and its representations
A matrix is a two-dimensional data object made of m rows and n columns, therefore
having total m x n values. If most of the elements of the matrix have 0 value, then it is
called a sparse matrix.
Why to use Sparse Matrix instead of simple matrix ?
 Storage: There are lesser non-zero elements than zeros and thus lesser
memory can be used to store only those elements.
 Computing time: Computing time can be saved by logically designing a data
structure traversing only non-zero elements..
Example:
0 0 3 0 4
0 0 5 7 0
0 0 0 0 0
0 2 6 0 0
Representing a sparse matrix by a 2D array leads to wastage of lots of memory as
zeroes in the matrix are of no use in most of the cases. So, instead of storing zeroes
with non-zero elements, we only store non-zero elements. This means storing non-zero
elements with triples- (Row, Column, value).
Sparse Matrix Representations can be done in many ways following are two common
representations:
1. Array representation
2. Linked list representation
Method 1: Using Arrays
#include<stdio.h>
int main()
{
// Assume 4x5 sparse matrix
int sparseMatrix[4][5] =
{
{0 , 0 , 3 , 0 , 4 },
{0 , 0 , 5 , 7 , 0 },
{0 , 0 , 0 , 0 , 0 },
{0 , 2 , 6 , 0 , 0 }
};
int size = 0;
for (int i = 0; i < 4; i++)
for (int j = 0; j < 5; j++)
if (sparseMatrix[i][j] != 0)
size++;
int compactMatrix[3][size];
// Making of new matrix

int k = 0;
for (int i = 0; i < 4; i++)
for (int j = 0; j < 5; j++)
if (sparseMatrix[i][j] != 0)
{
compactMatrix[0][k] = i;
compactMatrix[1][k] = j;
compactMatrix[2][k] = sparseMatrix[i][j];
k++;
}
for (int i=0; i<3; i++)
{
for (int j=0; j<size; j++)
printf("%d ", compactMatrix[i][j]);
printf("n");
}
return 0;
}

Lecture-04
STACK
A stack is an Abstract Data Type (ADT), commonly used in most programming languages. It is
named stack as it behaves like a real-world stack, for example – a deck of cards or a pile of
plates, etc.
A real-world stack allows operations at one end only. For example, we can place or remove a
card or plate from the top of the stack only. Likewise, Stack ADT allows all data operations at
one end only. At any given time, we can only access the top element of a stack.
This feature makes it LIFO data structure. LIFO stands for Last-in-first-out. Here, the element
which is placed (inserted or added) last, is accessed first. In stack terminology, insertion
operation is called PUSH operation and removal operation is called POP operation.
Stack Representation
The following diagram depicts a stack and its operations −
A stack can be implemented by means of Array, Structure, Pointer, and Linked List. Stack can
either be a fixed size one or it may have a sense of dynamic resizing. Here, we are going to
implement stack using arrays, which makes it a fixed size stack implementation.
BasicOperations
Stack operations may involve initializing the stack, using it and then de-initializing it. Apart from
these basic stuffs, a stack is used for the following two primary operations −
 push() − Pushing (storing) an element on the stack.

 pop() − Removing (accessing) an element from the stack.
When data is PUSHed onto stack.
To use a stack efficiently, we need to check the status of stack as well. For the same purpose,
the following functionality is added to stacks −
 peek() − get the top data element of the stack, without removing it.
 isFull() − check if stack is full.
 isEmpty() − check if stack is empty.
At all times, we maintain a pointer to the last PUSHed data on the stack. As this pointer always
represents the top of the stack, hence named top. The top pointer provides top value of the
stack without actually removing it.
First we should learn about procedures to support stack functions −
peek()
Algorithm of peek() function −
begin procedure peek
return stack[top]
end procedure
Implementation of peek() function in C programming language −
Example
int peek() {
return stack[top];
}
isfull()
Algorithm of isfull() function −
begin procedure isfull
if top equals to MAXSIZE
return true
else
return false
endif
end procedure
Implementation of isfull() function in C programming language −
Example
bool isfull() {
if(top == MAXSIZE)
return true;
else
return false;
}

isempty()
Algorithm of isempty() function −
begin procedure isempty
if top less than 1
return true
else
return false
endif
end procedure
Implementation of isempty() function in C programming language is slightly different. We
initialize top at -1, as the index in array starts from 0. So we check if the top is below zero or -1
to determine if the stack is empty. Here's the code −
Example
bool isempty() {
if(top == -1)
return true;
else
return false;
}
PushOperation
The process of putting a new data element onto stack is known as a Push Operation. Push
operation involves a series of steps −
 Step 1 − Checks if the stack is full.
 Step 2 − If the stack is full, produces an error and exit.
 Step 3 − If the stack is not full, increments top to point next empty space.
 Step 4 − Adds data element to the stack location, where top is pointing.
 Step 5 − Returns success.
If the linked list is used to implement the stack, then in step 3, we need to allocate space
dynamically.
Algorithm for PUSH Operation
A simple algorithm for Push operation can be derived as follows −
begin procedure push: stack, data
if stack is full

return null
endif
top ← top + 1
stack[top] ← data
end procedure
Implementation of this algorithm in C, is very easy. See the following code −
Example
void push(int data) {
if(!isFull()) {
top = top + 1;
stack[top] = data;
} else {
printf("Could not insert data, Stack is full.n");
}
}
Pop Operation
Accessing the content while removing it from the stack, is known as a Pop Operation. In an
array implementation of pop() operation, the data element is not actually removed,
instead top is decremented to a lower position in the stack to point to the next value. But in
linked-list implementation, pop() actually removes data element and deallocates memory space.
A Pop operation may involve the following steps −
 Step 1 − Checks if the stack is empty.
 Step 2 − If the stack is empty, produces an error and exit.
 Step 3 − If the stack is not empty, accesses the data element at which top is pointing.
 Step 4 − Decreases the value of top by 1.
 Step 5 − Returns success.
Algorithm for Pop Operation

A simple algorithm for Pop operation can be derived as follows −
begin procedure pop: stack
if stack is empty
return null
endif
data ← stack[top]
top ← top - 1
return data
end procedure
Implementation of this algorithm in C, is as follows −
Example
int pop(int data) {
if(!isempty()) {
data = stack[top];
top = top - 1;
return data;
} else {
printf("Could not retrieve data, Stack is empty.n");
}
}

Lecture-05
Stack Applications
Three applications of stacks are presented here. These examples are central to many activities
that a computer must do and deserve time spent with them.
1. Expression evaluation
2. Backtracking (game playing, finding paths, exhaustive searching)
3. Memory management, run-time environment for nested language features.
Expression evaluation
In particular we will consider arithmetic expressions. Understand that there are boolean and
logical expressions that can be evaluated in the same way. Control structures can also be
treated similarly in a compiler.
This study of arithmetic expression evaluation is an example of problem solving where you solve
a simpler problem and then transform the actual problem to the simpler one.
Aside: The NP-Complete problem. There are a set of apparently intractable problems: finding
the shortest route in a graph (Traveling Salesman Problem), bin packing, linear programming,
etc. that are similar enough that if a polynomial solution is ever found (exponential solutions
abound) for one of these problems, then the solution can be applied to all problems.
Infix, Prefix and Postfix Notation
We are accustomed to write arithmetic expressions with the operation between the two
operands: a+b or c/d. If we write a+b*c, however, we have to apply precedence rules to avoid
the ambiguous evaluation (add first or multiply first?).
There's no real reason to put the operation between the variables or values. They can just as
well precede or follow the operands. You should note the advantage of prefix and postfix: the
need for precedence rules and parentheses are eliminated.
Infix Prefix Postfix
a + b + a b a b +
a + b * c + a * b c a b c * +
(a + b) * (c - d) * + a b - c d a b + c d - *
b * b - 4 * a * c
40 - 3 * 5 + 1
Postfix expressions are easily evaluated with the aid of a stack.
Infix, Prefix and Postfix Notation KEY
Infix Prefix Postfix
a + b + a b a b +

a + b * c + a * b c a b c * +
(a + b) * (c - d) * + a b - c d a b + c d - *
b * b - 4 * a * c - * b b * * 4 a c b b * 4 a * c * -
40 - 3 * 5 + 1 = 26 + - 40 * 3 5 1 40 3 5 * - 1 +
Postfix Evaluation Algorithm
Assume we have a string of operands and operators, an informal, by hand process is
1. Scan the expression left to right
2. Skip values or variables (operands)
3. When an operator is found, apply the operation to the preceding two operands
4. Replace the two operands and operator with the calculated value (three symbols are
replaced with one operand)
5. Continue scanning until only a value remains--the result of the expression
The time complexity is O(n) because each operand is scanned once, and each operation is
performed once.
A more formal algorithm:
create a new stack
while(input stream is not empty){
token = getNextToken();
if(token instanceof operand){
push(token);
} else if (token instance of operator)
op2 = pop();
op1 = pop();
result = calc(token, op1, op2);
push(result);
}
}
return pop();
Demonstration with 2 3 4 + * 5 -
Infix transformation to Postfix
This process uses a stack as well. We have to hold information that's expressed inside
parentheses while scanning to find the closing ')'. We also have to hold information on
operations that are of lower precedence on the stack. The algorithm is:
1. Create an empty stack and an empty postfix output string/stream
2. Scan the infix input string/stream left to right
3. If the current input token is an operand, simply append it to the output string (note the
examples above that the operands remain in the same order)
4. If the current input token is an operator, pop off all operators that have equal or higher

precedence and append them to the output string; push the operator onto the stack. The
order of popping is the order in the output.
5. If the current input token is '(', push it onto the stack
6. If the current input token is ')', pop off all operators and append them to the output string
until a '(' is popped; discard the '('.
7. If the end of the input string is found, pop all operators and append them to the output
string.
This algorithm doesn't handle errors in the input, although careful analysis of parenthesis or lack
of parenthesis could point to such error determination.
Apply the algorithm to the above expressions.
Backtracking
Backtracking is used in algorithms in which there are steps along some path (state) from some
starting point to some goal.
 Find your way through a maze.
 Find a path from one point in a graph (roadmap) to another point.
 Play a game in which there are moves to be made (checkers, chess).
In all of these cases, there are choices to be made among a number of options. We need some
way to remember these decision points in case we want/need to come back and try the
alternative
Consider the maze. At a point where a choice is made, we may discover that the choice leads
to a dead-end. We want to retrace back to that decision point and then try the other (next)
alternative.
Again, stacks can be used as part of the solution. Recursion is another, typically more favored,
solution, which is actually implemented by a stack.
Memory Management
Any modern computer environment uses a stack as the primary memory management model for
a running program. Whether it's native code (x86, Sun, VAX) or JVM, a stack is at the center of
the run-time environment for Java, C++, Ada, FORTRAN, etc.
The discussion of JVM in the text is consistent with NT, Solaris, VMS, Unix runtime
environments.
Each program that is running in a computer system has its own memory allocation containing
the typical layout as shown below.

Call and return process
When a method/function is called
1. An activation record is created; its size depends on the number and size of the local
variables and parameters.
2. The Base Pointer value is saved in the special location reserved for it
3. The Program Counter value is saved in the Return Address location
4. The Base Pointer is now reset to the new base (top of the call stack prior to the creation
of the AR)
5. The Program Counter is set to the location of the first bytecode of the method being
called
6. Copies the calling parameters into the Parameter region
7. Initializes local variables in the local variable region
While the method executes, the local variables and parameters are simply found by adding a
constant associated with each variable/parameter to the Base Pointer.
When a method returns
1. Get the program counter from the activation record and replace what's in the PC
2. Get the base pointer value from the AR and replace what's in the BP
3. Pop the AR entirely from the stack.

Lecture-06
QUEUE
Queue is an abstract data structure, somewhat similar to Stacks. Unlike stacks, a queue is open
at both its ends. One end is always used to insert data (enqueue) and the other is used to
remove data (dequeue). Queue follows First-In-First-Out methodology, i.e., the data item stored
first will be accessed first.
A real-world example of queue can be a single-lane one-way road, where the vehicle enters
first, exits first. More real-world examples can be seen as queues at the ticket windows and bus-
stops.
Queue Representation
As we now understand that in queue, we access both ends for different reasons. The following
diagram given below tries to explain queue representation as data structure −
As in stacks, a queue can also be implemented using Arrays, Linked-lists, Pointers and
Structures. For the sake of simplicity, we shall implement queues using one-dimensional array.
BasicOperations
Queue operations may involve initializing or defining the queue, utilizing it, and then completely
erasing it from the memory. Here we shall try to understand the basic operations associated
with queues −
 enqueue() − add (store) an item to the queue.
 dequeue() − remove (access) an item from the queue.
Few more functions are required to make the above-mentioned queue operation efficient. These
are −
 peek() − Gets the element at the front of the queue without removing it.
 isfull() − Checks if the queue is full.
 isempty() − Checks if the queue is empty.
In queue, we always dequeue (or access) data, pointed by front pointer and while enqueing (or
storing) data in the queue we take help of rear pointer.
Let's first learn about supportive functions of a queue −
peek()

This function helps to see the data at the front of the queue. The algorithm of peek() function is
as follows −
Algorithm
begin procedure peek
return queue[front]
end procedure
Implementation of peek() function in C programming language −
Example
int peek() {
return queue[front];
}
isfull()
As we are using single dimension array to implement queue, we just check for the rear pointer
to reach at MAXSIZE to determine that the queue is full. In case we maintain the queue in a
circular linked-list, the algorithm will differ. Algorithm of isfull() function −
Algorithm
begin procedure isfull
if rear equals to MAXSIZE
return true
else
return false
endif
end procedure
Implementation of isfull() function in C programming language −
Example
bool isfull() {
if(rear == MAXSIZE - 1)
return true;
else
return false;
}
isempty()
Algorithm of isempty() function −
Algorithm
begin procedure isempty
if front is less than MIN OR front is greater than rear
return true

else
return false
endif
end procedure
If the value of front is less than MIN or 0, it tells that the queue is not yet initialized, hence
empty.
Here's the C programming code −
Example
bool isempty() {
if(front < 0 || front > rear)
return true;
else
return false;
}
Enqueue Operation
Queues maintain two data pointers, front and rear. Therefore, its operations are comparatively
difficult to implement than that of stacks.
The following steps should be taken to enqueue (insert) data into a queue −
 Step 1 − Check if the queue is full.
 Step 2 − If the queue is full, produce overflow error and exit.
 Step 3 − If the queue is not full, increment rear pointer to point the next empty space.
 Step 4 − Add data element to the queue location, where the rear is pointing.
 Step 5 − return success.
Sometimes, we also check to see if a queue is initialized or not, to handle any unforeseen
situations.
Algorithm for enqueue operation
procedure enqueue(data)
if queue is full
return overflow

endif
rear ← rear + 1
queue[rear] ← data
return true
end procedure
Implementation of enqueue() in C programming language −
Example
int enqueue(int data)
if(isfull())
return 0;
rear = rear + 1;
queue[rear] = data;
return 1;
end procedure
Dequeue Operation
Accessing data from the queue is a process of two tasks − access the data where front is
pointing and remove the data after access. The following steps are taken to
perform dequeue operation −
 Step 1 − Check if the queue is empty.
 Step 2 − If the queue is empty, produce underflow error and exit.
 Step 3 − If the queue is not empty, access the data where front is pointing.
 Step 4 − Increment front pointer to point to the next available data element.
 Step 5 − Return success.
Algorithm for dequeue operation
procedure dequeue

if queue is empty
return underflow
end if
data = queue[front]
front ← front + 1
return true
end procedure
Implementation of dequeue() in C programming language −
Example
int dequeue() {
if(isempty())
return 0;
int data = queue[front];
front = front + 1;
return data;
}

Lecture-07
LINKED LIST
A linked list is a sequence of data structures, which are connected together via links.
Linked List is a sequence of links which contains items. Each link contains a connection
to another link. Linked list is the second most-used data structure after array. Following
are the important terms to understand the concept of Linked List.
 Link − Each link of a linked list can store a data called an element.
 Next − Each link of a linked list contains a link to the next link called Next.
 LinkedList − A Linked List contains the connection link to the first link called
First.
Linked ListRepresentation
Linked list can be visualized as a chain of nodes, where every node points to the next
node.
As per the above illustration, following are the important points to be considered.
 Linked List contains a link element called first.
 Each link carries a data field(s) and a link field called next.
 Each link is linked with its next link using its next link.
 Last link carries a link as null to mark the end of the list.
TypesofLinkedList
Following are the various types of linked list.
 Simple Linked List − Item navigation is forward only.
 Doubly Linked List − Items can be navigated forward and backward.
 Circular Linked List − Last item contains link of the first element as next and
the first element has a link to the last element as previous.
BasicOperations
Following are the basic operations supported by a list.
 Insertion − Adds an element at the beginning of the list.
 Deletion − Deletes an element at the beginning of the list.
 Display − Displays the complete list.
 Search − Searches an element using the given key.
 Delete − Deletes an element using the given key.
InsertionOperation
Adding a new node in linked list is a more than one step activity. We shall learn this
with diagrams here. First, create a node using the same structure and find the location
where it has to be inserted.

Imagine that we are inserting a node B (NewNode), between A (LeftNode)
and C (RightNode). Then point B.next to C −
NewNode.next −> RightNode;
It should look like this −
Now, the next node at the left should point to the new node.
LeftNode.next −> NewNode;
This will put the new node in the middle of the two. The new list should look like this −
Similar steps should be taken if the node is being inserted at the beginning of the list.
While inserting it at the end, the second last node of the list should point to the new
node and the new node will point to NULL.

DeletionOperation
Deletion is also a more than one step process. We shall learn with pictorial
representation. First, locate the target node to be removed, by using searching
algorithms.
The left (previous) node of the target node now should point to the next node of the
target node −
LeftNode.next −> TargetNode.next;
This will remove the link that was pointing to the target node. Now, using the following
code, we will remove what the target node is pointing at.
TargetNode.next −> NULL;
We need to use the deleted node. We can keep that in memory otherwise we can
simply deallocate memory and wipe off the target node completely.
Reverse Operation
This operation is a thorough one. We need to make the last node to be pointed by the
head node and reverse the whole linked list.

First, we traverse to the end of the list. It should be pointing to NULL. Now, we shall
make it point to its previous node −
We have to make sure that the last node is not the lost node. So we'll have some temp
node, which looks like the head node pointing to the last node. Now, we shall make all
left side nodes point to their previous nodes one by one.
Except the node (first node) pointed by the head node, all nodes should point to their
predecessor, making them their new successor. The first node will point to NULL.
We'll make the head node point to the new first node by using the temp node.
The linked list is now reversed.
Program:
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <stdbool.h>
struct node {
int data;
int key;
struct node *next;
};

struct node *head = NULL;
struct node *current = NULL;
//display the list
void printList() {
struct node *ptr = head;
printf("n[ ");
//start from the beginning
while(ptr != NULL) {
printf("(%d,%d) ",ptr->key,ptr->data);
ptr = ptr->next;
}
printf(" ]");
}
//insert link at the first location
void insertFirst(int key, int data) {
//create a link
struct node *link = (struct node*) malloc(sizeof(struct node));
link->key = key;
link->data = data;
//point it to old first node
link->next = head;
//point first to new first node
head = link;
}
//delete first item
struct node* deleteFirst() {
//save reference to first link
struct node *tempLink = head;
//mark next to first link as first
head = head->next;
//return the deleted link

return tempLink;
}
//is list empty
bool isEmpty() {
return head == NULL;
}
int length() {
int length = 0;
struct node *current;
for(current = head; current != NULL; current = current->next) {
length++;
}
return length;
}
//find a link with given key
struct node* find(int key) {
//start from the first link
struct node* current = head;
//if list is empty
if(head == NULL) {
return NULL;
}
//navigate through list
while(current->key != key) {
//if it is last node
if(current->next == NULL) {
return NULL;
} else {
//go to next link
current = current->next;
}
}

//if data found, return the current Link
return current;
}
//delete a link with given key
struct node* delete(int key) {
//start from the first link
struct node* current = head;
struct node* previous = NULL;
//if list is empty
if(head == NULL) {
return NULL;
}
//navigate through list
while(current->key != key) {
//if it is last node
if(current->next == NULL) {
return NULL;
} else {
//store reference to current link
previous = current;
//move to next link
}
}
//found a match, update the link
if(current == head) {
//change first to point to next link
head = head->next;
} else {
//bypass the current link
previous->next = current->next;
}
return current;
}

void sort() {
int i, j, k, tempKey, tempData;
struct node *next;
int size = length();
k = size ;
for ( i = 0 ; i < size - 1 ; i++, k-- ) {
current = head;
next = head->next;
for ( j = 1 ; j < k ; j++ ) {
if ( current->data > next->data ) {
tempData = current->data;
current->data = next->data;
next->data = tempData;
tempKey = current->key;
current->key = next->key;
next->key = tempKey;
}
next = next->next;
}
}
}
void reverse(struct node** head_ref) {
struct node* prev = NULL;
struct node* current = *head_ref;
struct node* next;
while (current != NULL) {
next = current->next;
current->next = prev;
prev = current;
current = next;
}

*head_ref = prev;
}
void main() {
insertFirst(1,10);
insertFirst(2,20);
insertFirst(3,30);
insertFirst(4,1);
insertFirst(5,40);
insertFirst(6,56);
printf("Original List: ");
//print list
printList();
while(!isEmpty()) {
struct node *temp = deleteFirst();
printf("nDeleted value:");
printf("(%d,%d) ",temp->key,temp->data);
}
printf("nList after deleting all items: ");
printList();
insertFirst(1,10);
insertFirst(2,20);
insertFirst(3,30);
insertFirst(4,1);
insertFirst(5,40);
insertFirst(6,56);
printf("nRestored List: ");
printList();
printf("n");
struct node *foundLink = find(4);
if(foundLink != NULL) {
printf("Element found: ");
printf("(%d,%d) ",foundLink->key,foundLink->data);
printf("n");

} else {
printf("Element not found.");
}
delete(4);
printf("List after deleting an item: ");
printList();
printf("n");
foundLink = find(4);
if(foundLink != NULL) {
printf("Element found: ");
printf("(%d,%d) ",foundLink->key,foundLink->data);
printf("n");
} else {
printf("Element not found.");
}
printf("n");
sort();
printf("List after sorting the data: ");
printList();
reverse(&head);
printf("nList after reversing the data: ");
printList();
}
If we compile and run the above program, it will produce the following result −
Output
Original List:
[ (6,56) (5,40) (4,1) (3,30) (2,20) (1,10) ]
Deleted value:(6,56)
Deleted value:(4,1)
List after deleting all items:
[ ]
Restored List:
[ (6,56) (5,40) (4,1) (3,30) (2,20) (1,10) ]

Element found: (4,1)
List after deleting an item:
[ (6,56) (5,40) (3,30) (2,20) (1,10) ]
Element not found.
List after sorting the data:
[ (1,10) (2,20) (3,30) (5,40) (6,56) ]
List after reversing the data:
[ (6,56) (5,40) (3,30) (2,20) (1,10) ]

Lecture-08
Polynomial List
A polynomial p(x) is the expression in variable x which is in the form (axn
+ bxn-1
+ …. +
jx+ k), where a, b, c …., k fall in the category of real numbers and 'n' is non negative
integer, which is called the degree of polynomial.
An important characteristics of polynomial is that each term in the polynomial
expression consists of two parts:
 one is the coefficient
 other is the exponent
Example:
10x2
+ 26x, here 10 and 26 are coefficients and 2, 1 are its exponential value.
Points to keep in Mind while working with Polynomials:
 The sign of each coefficient and exponent is stored within the coefficient and the
exponent itself
 Additional terms having equal exponent is possible one
 The storage allocation for each term in the polynomial must be done in
ascending and descending order of their exponent
Representation of Polynomial
Polynomial can be represented in the various ways. These are:
 By the use of arrays
 By the use of Linked List
Representation of Polynomials using Arrays
There may arise some situation where you need to evaluate many polynomial
expressions and perform basic arithmetic operations like: addition and subtraction with
those numbers. For this you will have to get a way to represent those polynomials. The
simple way is to represent a polynomial with degree 'n' and store the coefficient of n+1
terms of the polynomial in array. So every array element will consists of two values:
 Coefficient and
 Exponent
Representation of Polynomial Using Linked Lists
A polynomial can be thought of as an ordered list of non zero terms. Each non zero
term is a two tuple which holds two pieces of information:

 The exponent part
 The coefficient part
Adding two polynomials using Linked List
Given two polynomial numbers represented by a linked list. Write a function that add
these lists means add the coefficients who have same variable powers.
Example:
Input:
1st number = 5x^2 + 4x^1 + 2x^0
2nd number = 5x^1 + 5x^0
Output:
5x^2 + 9x^1 + 7x^0
Input:
1st number = 5x^3 + 4x^2 + 2x^0
2nd number = 5x^1 + 5x^0
Output:
5x^3 + 4x^2 + 5x^1 + 7x^0

struct Node
{
int coeff;
int pow;
struct Node *next;
};
void create_node(int x, int y, struct Node **temp)
{
struct Node *r, *z;
z = *temp;
if(z == NULL)
{
r =(struct Node*)malloc(sizeof(struct Node));
r->coeff = x;
r->pow = y;
*temp = r;
r->next = (struct Node*)malloc(sizeof(struct Node));
r = r->next;
r->next = NULL;
}
else
{
r->coeff = x;
r->pow = y;

r->next = (struct Node*)malloc(sizeof(struct Node));
r = r->next;
r->next = NULL;
}
}
void polyadd(struct Node *poly1, struct Node *poly2, struct Node *poly)
{
while(poly1->next && poly2->next)
{
if(poly1->pow > poly2->pow)
{
poly->pow = poly1->pow;
poly->coeff = poly1->coeff;
poly1 = poly1->next;
}
else if(poly1->pow < poly2->pow)
{
}
else
{
poly->coeff = poly1->coeff+poly2->coeff;

}
poly->next = (struct Node *)malloc(sizeof(struct Node));
poly = poly->next;
poly->next = NULL;
}
while(poly1->next || poly2->next)
{
if(poly1->next)
{
}
if(poly2->next)
{
}
poly->next = (struct Node *)malloc(sizeof(struct Node));
poly = poly->next;
poly->next = NULL;
}

}
void show(struct Node *node)
{
while(node->next != NULL)
{
printf("%dx^%d", node->coeff, node->pow);
node = node->next;
if(node->next != NULL)
printf(" + ");
}
}
int main()
{
struct Node *poly1 = NULL, *poly2 = NULL, *poly = NULL;
// Create first list of 5x^2 + 4x^1 + 2x^0
create_node(5,2,&poly1);
// Create second list of 5x^1 + 5x^0
printf("1st Number: ");
show(poly1);
printf("n2nd Number: ");
show(poly2);

poly = (struct Node *)malloc(sizeof(struct Node));
// Function add two polynomial numbers
polyadd(poly1, poly2, poly);
// Display resultant List
printf("nAdded polynomial: ");
show(poly);
return 0;
}
Output:
1st Number: 5x^2 + 4x^1 + 2x^0
2nd Number: 5x^1 + 5x^0
Added polynomial: 5x^2 + 9x^1 + 7x^0

Lecture-09
Doubly Linked List
A Doubly Linked List (DLL) contains an extra pointer, typically called previous pointer,
together with next pointer and data which are there in singly linked list.
Following is representation of a DLL node in C language.
/* Node of a doubly linked list */
struct Node {
int data;
struct Node* next; // Pointer to next node in DLL
struct Node* prev; // Pointer to previous node in DLL
};
Following are advantages/disadvantages of doubly linked list over singly linked list.
Advantages over singly linked list
1) A DLL can be traversed in both forward and backward direction.
2) The delete operation in DLL is more efficient if pointer to the node to be deleted is
given.
3) We can quickly insert a new node before a given node.
In singly linked list, to delete a node, pointer to the previous node is needed. To get
this previous node, sometimes the list is traversed. In DLL, we can get the previous
node using previous pointer.
Disadvantages over singly linked list
1) Every node of DLL Require extra space for an previous pointer. It is possible to
implement DLL with single pointer though
2) All operations require an extra pointer previous to be maintained. For example, in
insertion, we need to modify previous pointers together with next pointers. For
example in following functions for insertions at different positions, we need 1 or 2 extra
steps to set previous pointer.
Insertion
A node can be added in four ways
1) At the front of the DLL
2) After a given node.
3) At the end of the DLL
4) Before a given node.
1) Add a node at the front: (A 5 steps process)
The new node is always added before the head of the given Linked List. And newly
added node becomes the new head of DLL. For example if the given Linked List is

10152025 and we add an item 5 at the front, then the Linked List becomes 510152025.
Let us call the function that adds at the front of the list is push(). The push() must
receive a pointer to the head pointer, because push must change the head pointer to
point to the new node
2) Add a node after a given node.: (A 7 steps process)
We are given pointer to a node as prev_node, and the new node is inserted after the
given node.
3) Add a node at the end: (7 steps process)
The new node is always added after the last node of the given Linked List. For example
if the given DLL is 510152025 and we add an item 30 at the end, then the DLL becomes
51015202530. Since a Linked List is typically represented by the head of it, we have to
traverse the list till end and then change the next of last node to new node.
4) Add a node before a given node:
Steps
Let the pointer to this given node be next_node and the data of the new node to be
added as new_data.

1. Check if the next_node is NULL or not. If it’s NULL, return from the function
because any new node can not be added before a NULL
2. Allocate memory for the new node, let it be called new_node
3. Set new_node->data = new_data
4. Set the previous pointer of this new_node as the previous node of the next_node,
new_node->prev = next_node->prev
5. Set the previous pointer of the next_node as the new_node, next_node->prev =
new_node
6. Set the next pointer of this new_node as the next_node, new_node->next =
next_node;
7. If the previous node of the new_node is not NULL, then set the next pointer of
this previous node as new_node, new_node->prev->next = new_node

Lecture-10
Circular Linked List
Circular linked list is a linked list where all nodes are connected to form a circle. There is
no NULL at the end. A circular linked list can be a singly circular linked list or doubly
circular linked list.
Advantages of Circular Linked Lists:
1) Any node can be a starting point. We can traverse the whole list by starting from any
point. We just need to stop when the first visited node is visited again.
2) Useful for implementation of queue. Unlike this implementation, we don’t need to
maintain two pointers for front and rear if we use circular linked list. We can maintain a
pointer to the last inserted node and front can always be obtained as next of last.
3) Circular lists are useful in applications to repeatedly go around the list. For example,
when multiple applications are running on a PC, it is common for the operating system
to put the running applications on a list and then to cycle through them, giving each of
them a slice of time to execute, and then making them wait while the CPU is given to
another application. It is convenient for the operating system to use a circular list so that
when it reaches the end of the list it can cycle around to the front of the list.
4) Circular Doubly Linked Lists are used for implementation of advanced data structures
like Fibonacci Heap.
Insertion in an empty List
Initially when the list is empty, last pointer will be NULL.
After inserting a node T,
After insertion, T is the last node so pointer last points to node T. And Node T is first
and last node, so T is pointing to itself.
Function to insert node in an empty List,
struct Node *addToEmpty(struct Node *last, int data)
{
// This function is only for empty list
if (last != NULL)
return last;

// Creating a node dynamically.
struct Node *last =
(struct Node*)malloc(sizeof(struct Node));
// Assigning the data.
last -> data = data;
// Note : list was empty. We link single node
// to itself.
last -> next = last;
return last;
}
Run on IDE
Insertion at the beginning of the list
To Insert a node at the beginning of the list, follow these step:
1. Create a node, say T.
2. Make T -> next = last -> next.
3. last -> next = T.
After insertion,
Function to insert node in the beginning of the List,
struct Node *addBegin(struct Node *last, int data)
{
if (last == NULL)
return addToEmpty(last, data);
struct Node *temp
= (struct Node *)malloc(sizeof(struct Node));
temp -> data = data;
// Adjusting the links.
temp -> next = last -> next;
last -> next = temp;
return last;

}
Insertion at the end of the list
To Insert a node at the end of the list, follow these step:
2. Make T -> next = last -> next;
3. last -> next = T.
4. last = T.
After insertion,
Function to insert node in the end of the List,
struct Node *addEnd(struct Node *last, int data)
{
if (last == NULL)
return addToEmpty(last, data);

struct Node *temp =
(struct Node *)malloc(sizeof(struct Node));
temp -> next = last -> next;
last -> next = temp;
last = temp;
return last;
}
Insertion in between the nodes
To Insert a node at the end of the list, follow these step:
2. Search the node after which T need to be insert, say that node be P.
3. Make T -> next = P -> next;
4. P -> next = T.
Suppose 12 need to be insert after node having value 10,
After searching and insertion,

Function to insert node in the end of the List,
struct Node *addAfter(struct Node *last, int data, int item)
{
if (last == NULL)
return NULL;
struct Node *temp, *p;
p = last -> next;
// Searching the item.
do
{
if (p ->data == item)
{
temp = (struct Node *)malloc(sizeof(struct Node));
temp -> next = p -> next;
// Adding newly allocated node after p.
p -> next = temp;
// Checking for the last node.
if (p == last)
last = temp;
return last;
}
p = p -> next;
} while (p != last -> next);
cout << item << " not present in the list." << endl;
return last;
}

Module-2:
Lecture-11
Memory Allocation-
Whenever a new node is created, memory is allocated by the system. This memory is
taken from list of those memory locations which are free i.e. not allocated. This list is
called AVAIL List. Similarly, whenever a node is deleted, the deleted space becomes
reusable and is added to the list of unused space i.e. to AVAIL List. This unused space
can be used in future for memory allocation.
Memory allocation is of two types-
1. Static Memory Allocation
2. Dynamic Memory Allocation
1. Static Memory Allocation:
When memory is allocated during compilation time, it is called ‘Static Memory
Allocation’. This memory is fixed and cannot be increased or decreased after
allocation. If more memory is allocated than requirement, then memory is wasted. If
less memory is allocated than requirement, then program will not run successfully.
So exact memory requirements must be known in advance.
2. Dynamic Memory Allocation:
When memory is allocated during run/execution time, it is called ‘Dynamic Memory
Allocation’. This memory is not fixed and is allocated according to our requirements.
Thus in it there is no wastage of memory. So there is no need to know exact memory
requirements in advance.
Garbage Collection-
Whenever a node is deleted, some memory space becomes reusable. This memory
space should be available for future use. One way to do this is to immediately insert the
free space into availability list. But this method may be time consuming for the operating
system. So another method is used which is called ‘Garbage Collection’. This method is
described below: In this method the OS collects the deleted space time to time onto the
availability list. This process happens in two steps. In first step, the OS goes through all
the lists and tags all those cells which are currently being used. In the second step, the

OS goes through all the lists again and collects untagged space and adds this collected
space to availability list. The garbage collection may occur when small amount of free
space is left in the system or no free space is left in the system or when CPU is idle and
has time to do the garbage collection.
Compaction
One preferable solution to garbage collection is compaction.
The process of moving all marked nodes to one end of memory and all available
memory to other end is called compaction. Algorithm which performs compaction is
called compacting algorithm.

Lecture-12
Infix to Postfix Conversion
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
#include<stdio.h>
char stack[20];
int top = -1;
void push(char x)
{
stack[++top] = x;
}
char pop()
{
if(top == -1)
return -1;
else
return stack[top--];
}
int priority(char x)
{
if(x == '(')
return 0;
if(x == '+' || x == '-')
return 1;
if(x == '*' || x == '/')
return 2;
}
main()
{
char exp[20];
char *e, x;
printf("Enter the expression :: ");
scanf("%s",exp);
e = exp;
while(*e != '0')
{
if(isalnum(*e))
printf("%c",*e);
else if(*e == '(')
push(*e);
else if(*e == ')')
{

42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
while((x = pop()) != '(')
printf("%c", x);
}
else
{
while(priority(stack[top]) >= priority(*e))
printf("%c",pop());
push(*e);
}
e++;
}
while(top != -1)
{
printf("%c",pop());
}
}
OUTPUT:
Enter the expression :: a+b*c
abc*+
Enter the expression :: (a+b)*c+(d-a)
ab+c*da-+

Evaluate POSTFIX Expression Using Stack
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
#include<stdio.h>
int stack[20];
int top = -1;
void push(int x)
{
stack[++top] = x;
}
int pop()
{
return stack[top--];
}
int main()
{
char exp[20];
char *e;
int n1,n2,n3,num;
printf("Enter the expression :: ");
scanf("%s",exp);
e = exp;
while(*e != '0')
{
if(isdigit(*e))

25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
{
num = *e - 48;
push(num);
}
else
{
n1 = pop();
n2 = pop();
switch(*e)
{
case '+':
{
n3 = n1 + n2;
break;
}
case '-':
{
n3 = n2 - n1;
break;
}
case '*':
{
n3 = n1 * n2;
break;
}

50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
case '/':
{
n3 = n2 / n1;
break;
}
}
push(n3);
}
e++;
}
printf("nThe result of expression %s = %dnn",exp,pop());
return 0;
}
Output:
Enter the expression :: 245+*
The result of expression 245+* = 18

Lecture-13
Binary Tree
A binary tree consists of a finite set of nodes that is either empty, or consists of one
specially designated node called the root of the binary tree, and the elements of two
disjoint binary trees called the left subtree and right subtree of the root.
Note that the definition above is recursive: we have defined a binary tree in terms of
binary trees. This is appropriate since recursion is an innate characteristic of tree
structures.
Diagram 1: A binary tree
Binary Tree Terminology
Tree terminology is generally derived from the terminology of family trees (specifically,
the type of family tree called a lineal chart).
 Each root is said to be the parent of the roots of its subtrees.
 Two nodes with the same parent are said to be siblings; they are the children of
their parent.
 The root node has no parent.
 A great deal of tree processing takes advantage of the relationship between a
parent and its children, and we commonly say a directed edge (or simply
an edge) extends from a parent to its children. Thus edges connect a root with
the roots of each subtree. An undirected edge extends in both directions between
a parent and a child.

 Grandparent and grandchild relations can be defined in a similar manner; we
could also extend this terminology further if we wished (designating nodes as
cousins, as an uncle or aunt, etc.).
Other Tree Terms
 The number of subtrees of a node is called the degree of the node. In a binary
tree, all nodes have degree 0, 1, or 2.
 A node of degree zero is called a terminal node or leaf node.
 A non-leaf node is often called a branch node.
 The degree of a tree is the maximum degree of a node in the tree. A binary tree
is degree 2.
 A directed path from node n1 to nk is defined as a sequence of nodes n1, n2,
..., nk such that ni is the parent of ni+1 for 1 <= i < k. An undirected path is a
similar sequence of undirected edges. The length of this path is the number of
edges on the path, namely k – 1 (i.e., the number of nodes – 1). There is a path
of length zero from every node to itself. Notice that in a binary tree there is
exactly one path from the root to each node.
 The level or depth of a node with respect to a tree is defined recursively: the level
of the root is zero; and the level of any other node is one higher than that of its
parent. Or to put it another way, the level or depth of a node ni is the length of the
unique path from the root to ni.
 The height of ni is the length of the longest path from ni to a leaf. Thus all leaves
in the tree are at height 0.
 The height of a tree is equal to the height of the root. The depth of a tree is equal
to the level or depth of the deepest leaf; this is always equal to the height of the
tree.
 If there is a directed path from n1 to n2, then n1 is an ancestor of n2 and n2 is a
descendant of n1.

Lecture-14
Special Forms of Binary Trees
There are a few special forms of binary tree worth mentioning.
If every non-leaf node in a binary tree has nonempty left and right subtrees, the tree is
termed a strictly binary tree. Or, to put it another way, all of the nodes in a strictly binary
tree are of degree zero or two, never degree one. A strictly binary tree with N leaves
always contains 2N – 1 nodes.
Some texts call this a "full" binary tree.
A complete binary tree of depth d is the strictly binary tree all of whose leaves are at
level d.
The total number of nodes in a complete binary tree of depth d equals 2d+1
– 1. Since all
leaves in such a tree are at level d, the tree contains 2d
leaves and, therefore, 2d
- 1
internal nodes.
Diagram 2: A complete binary tree
A binary tree of depth d is an almost complete binary tree if:
 Each leaf in the tree is either at level d or at level d – 1.
 For any node nd in the tree with a right descendant at level d, all the left
descendants of nd that are leaves are also at level d.
Diagram 3: An almost complete binary tree

An almost complete strictly binary tree with N leaves has 2N – 1 nodes (as does any
other strictly binary tree). An almost complete binary tree with N leaves that is not
strictly binary has 2N nodes. There are two distinct almost complete binary trees
with N leaves, one of which is strictly binary and one of which is not.
There is only a single almost complete binary tree with N nodes. This tree is strictly
binary if and only if N is odd.
Representing Binary Trees in Memory
Array Representation
For a complete or almost complete binary tree, storing the binary tree as an array may
be a good choice.
One way to do this is to store the root of the tree in the first element of the array. Then,
for each node in the tree that is stored at subscript k, the node's left child can be stored
at subscript 2k+1 and the right child can be stored at subscript 2k+2. For example, the
almost complete binary tree shown in Diagram 2 can be stored in an array like so:
However, if this scheme is used to store a binary tree that is not complete or almost
complete, we can end up with a great deal of wasted space in the array.

For example, the following binary tree
would be stored using this techinque like so:
Linked Representation
If a binary tree is not complete or almost complete, a better choice for storing it is to use
a linked representation similar to the linked list structures covered earlier in the
semester:

Each tree node has two pointers (usually named left and right). The tree class has a
pointer to the root node of the tree (labeled root in the diagram above).
Any pointer in the tree structure that does not point to a node will normally contain the
value NULL. A linked tree with N nodes will always contain N + 1 null links.

Lecture-15
Tree Traversal:
Traversal is a process to visit all the nodes of a tree and may print their values too.
Because, all nodes are connected via edges (links) we always start from the root
(head) node. That is, we cannot randomly access a node in a tree. There are three
ways which we use to traverse a tree −
 In-order Traversal
 Pre-order Traversal
 Post-order Traversal
Generally, we traverse a tree to search or locate a given item or key in the tree or to
print all the values it contains.
In-orderTraversal
In this traversal method, the left subtree is visited first, then the root and later the right
sub-tree. We should always remember that every node may represent a subtree itself.
If a binary tree is traversed in-order, the output will produce sorted key values in an
ascending order.
We start from A, and following in-order traversal, we move to its left subtree B. B is
also traversed in-order. The process goes on until all the nodes are visited. The output
of inorder traversal of this tree will be −
D → B → E → A → F → C → G

Algorithm
Until all nodes are traversed −
Step 1 − Recursively traverse left subtree.
Step 2 − Visit root node.
Step 3 − Recursively traverse right subtree.
Pre-orderTraversal
In this traversal method, the root node is visited first, then the left subtree and finally
the right subtree.
We start from A, and following pre-order traversal, we first visit A itself and then move
to its left subtree B. B is also traversed pre-order. The process goes on until all the
nodes are visited. The output of pre-order traversal of this tree will be −
A → B → D → E → C → F → G
Algorithm

Post-orderTraversal
In this traversal method, the root node is visited last, hence the name. First we traverse
the left subtree, then the right subtree and finally the root node.
We start from A, and following Post-order traversal, we first visit the left subtree B. B is
also traversed post-order. The process goes on until all the nodes are visited. The
output of post-order traversal of this tree will be −
D → E → B → F → G → C → A
Algorithm

Lecture-16
AVL Trees
An AVL tree is another balanced binary search tree. Named after their
inventors, Adelson-Velskii and Landis, they were the first dynamically balanced trees to
be proposed. Like red-black trees, they are not perfectly balanced, but pairs of sub-
trees differ in height by at most 1, maintaining an O(logn) search time. Addition and
deletion operations also take O(logn) time.
Definition of an AVL tree
An AVL tree is a binary search tree which has the following
properties:
1. The sub-trees of every node differ in height by at most one.
2. Every sub-tree is an AVL tree.
Balance requirement
for an AVL tree: the left
and right sub-trees
differ by at most 1 in
height.
You need to be careful with this definition: it permits some apparently unbalanced trees!
For example, here are some trees:
Tree AVL tree?
Yes
Examination shows
that each left sub-tree
has a height 1 greater
than each right sub-
tree.

No
Sub-tree with root 8 has
height 4 and sub-tree
with root 18 has height
2
Insertion
As with the red-black tree, insertion is somewhat complex and involves a number of
cases. Implementations of AVL tree insertion may be found in many textbooks: they rely
on adding an extra attribute, the balance factor to each node. This factor indicates
whether the tree is left-heavy (the height of the left sub-tree is 1 greater than the right
sub-tree), balanced (both sub-trees are the same height) or right-heavy(the height of the
right sub-tree is 1 greater than the left sub-tree). If the balance would be destroyed by
an insertion, a rotation is performed to correct the balance.
A new item has been
added to the left subtree
of node 1, causing its
height to become 2
greater than 2's right sub-
tree (shown in green). A
right-rotation is performed
to correct the imbalance.

Lecture-17
B+-tree
In B+-tree, each node stores up to d references to children and up to d − 1 keys. Each
reference is considered “between” two of the node's keys; it references the root of a
subtree for which all values are between these two keys.
Here is a fairly small tree using 4 as our value for d.
A B+-tree requires that each leaf be the same distance from the root, as in this picture,
where searching for any of the 11 values (all listed on the bottom level) will involve
loading three nodes from the disk (the root block, a second-level block, and a leaf).
In practice, d will be larger — as large, in fact, as it takes to fill a disk block. Suppose a
block is 4KB, our keys are 4-byte integers, and each reference is a 6-byte file offset.
Then we'd choose d to be the largest value so that 4 (d − 1) + 6 d ≤ 4096; solving this
inequality for d, we end up with d ≤ 410, so we'd use 410 for d. As you can see, d can
be large.
A B+-tree maintains the following invariants:
 Every node has one more references than it has keys.
 All leaves are at the same distance from the root.
 For every non-leaf node N with k being the number of keys in N: all keys in the
first child's subtree are less than N's first key; and all keys in the ith child's
subtree (2 ≤ i ≤ k) are between the (i − 1)th key of n and the ith key of n.
 The root has at least two children.
 Every non-leaf, non-root node has at least floor(d / 2) children.

 Each leaf contains at least floor(d / 2) keys.
 Every key from the table appears in a leaf, in left-to-right sorted order.
In our examples, we'll continue to use 4 for d. Looking at our invariants, this requires
that each leaf have at least two keys, and each internal node to have at least two
children (and thus at least one key).
2. Insertion algorithm
Descend to the leaf where the key fits.
1. If the node has an empty space, insert the key/reference pair into the node.
2. If the node is already full, split it into two nodes, distributing the keys evenly
between the two nodes. If the node is a leaf, take a copy of the minimum value in
the second of these two nodes and repeat this insertion algorithm to insert it into
the parent node. If the node is a non-leaf, exclude the middle value during the
split and repeat this insertion algorithm to insert this excluded value into the
parent node.
Initial:
Insert 20:
Insert 13:

Insert 15:
Insert 10:
Insert 11:
Insert 12:
3. Deletion algorithm
Descend to the leaf where the key exists.
1. Remove the required key and associated reference from the node.
2. If the node still has enough keys and references to satisfy the invariants, stop.

3. If the node has too few keys to satisfy the invariants, but its next oldest or next
youngest sibling at the same level has more than necessary, distribute the keys
between this node and the neighbor. Repair the keys in the level above to
represent that these nodes now have a different “split point” between them; this
involves simply changing a key in the levels above, without deletion or insertion.
4. If the node has too few keys to satisfy the invariant, and the next oldest or next
youngest sibling is at the minimum for the invariant, then merge the node with its
sibling; if the node is a non-leaf, we will need to incorporate the “split key” from
the parent into our merging. In either case, we will need to repeat the removal
algorithm on the parent node to remove the “split key” that previously separated
these merged nodes — unless the parent is the root and we are removing the
final key from the root, in which case the merged node becomes the new root
(and the tree has become one level shorter than before).
Initial:
Delete 13:

Delete 15:
Delete 1:
Expression Trees:
Trees are used in many other ways in the computer science. Compilers and database
are two major examples in this regard. In case of compilers, when the languages are
translated into machine language, tree-like structures are used. We have also seen an
example of expression tree comprising the mathematical expression. Let’s have more
discussion on the expression trees. We will see what are the benefits of expression
trees and how can we build an expression tree. Following is the figure of an expression
tree.

In the above tree, the expression on the left side is a + b * c while on the right side, we
have d * e + f * g. If you look at the figure, it becomes evident that the inner nodes
contain operators while leaf nodes have operands. We know that there are two types of
nodes in the tree i.e. inner nodes and leaf nodes. The leaf nodes are such nodes which
have left and right subtrees as null. You will find these at the bottom level of the tree.
The leaf nodes are connected with the inner nodes. So in trees, we have some inner
nodes and some leaf nodes.
In the above diagram, all the inner nodes (the nodes which have either left or right child
or both) have operators. In this case, we have + or * as operators. Whereas leaf nodes
contain operands only i.e. a, b, c, d, e, f, g. This tree is binary as the operators are
binary. We have discussed the evaluation of postfix and infix expressions and have
seen that the binary operators need two operands. In the infix expressions, one operand
is on the left side of the operator and the other is on the right side. Suppose, if we have
+ operator, it will be written as 2 + 4. However, in case of multiplication, we will write as
5*6. We may have unary operators like negation (-) or in Boolean expression we have
NOT. In this example, there are all the binary operators. Therefore, this tree is a binary
tree. This is not the Binary Search Tree. In BST, the values on the left side of the nodes
are smaller and the values on the right side are greater than the node. Therefore, this is
not a BST. Here we have an expression tree with no sorting process involved.
This is not necessary that expression tree is always binary tree. Suppose we have a
unary operator like negation. In this case, we have a node which has (-) in it and there is
only one leaf node under it. It means just negate that operand.
Let’s talk about the traversal of the expression tree. The inorder traversal may be
executed here.

Lecture-18
Binary Search Tree (BST)
A Binary Search Tree (BST) is a tree in which all the nodes follow the below-mentioned
properties −
 The left sub-tree of a node has a key less than or equal to its parent node's key.
 The right sub-tree of a node has a key greater than to its parent node's key.
Thus, BST divides all its sub-trees into two segments; the left sub-tree and the right
sub-tree and can be defined as −
left_subtree (keys) ≤ node (key) ≤ right_subtree (keys)
Representation
BST is a collection of nodes arranged in a way where they maintain BST properties.
Each node has a key and an associated value. While searching, the desired key is
compared to the keys in BST and if found, the associated value is retrieved.
Following is a pictorial representation of BST −
We observe that the root node key (27) has all less-valued keys on the left sub-tree
and the higher valued keys on the right sub-tree.
BasicOperations
Following are the basic operations of a tree −
 Search − Searches an element in a tree.
 Insert − Inserts an element in a tree.
 Pre-order Traversal − Traverses a tree in a pre-order manner.
 In-order Traversal − Traverses a tree in an in-order manner.
 Post-order Traversal − Traverses a tree in a post-order manner.
Node

Define a node having some data, references to its left and right child nodes.
struct node {
int data;
struct node *leftChild;
struct node *rightChild;
};
SearchOperation
Whenever an element is to be searched, start searching from the root node. Then if the
data is less than the key value, search for the element in the left subtree. Otherwise,
search for the element in the right subtree. Follow the same algorithm for each node.
Algorithm
struct node* search(int data){
struct node *current = root;
printf("Visiting elements: ");
while(current->data != data){
if(current != NULL) {
printf("%d ",current->data);
//go to left tree
if(current->data > data){
current = current->leftChild;
} //else go to right tree
else {
current = current->rightChild;
}
//not found

if(current == NULL){
return NULL;
}
}
}
return current;
}
Insert Operation
Whenever an element is to be inserted, first locate its proper location. Start searching
from the root node, then if the data is less than the key value, search for the empty
location in the left subtree and insert the data. Otherwise, search for the empty location
in the right subtree and insert the data.
Algorithm
void insert(int data) {
struct node *tempNode = (struct node*) malloc(sizeof(struct node));
struct node *parent;
tempNode->data = data;
tempNode->leftChild = NULL;
tempNode->rightChild = NULL;
//if tree is empty
if(root == NULL) {
root = tempNode;
} else {
current = root;
parent = NULL;

while(1) {
parent = current;
//go to left of the tree
if(data < parent->data) {
current = current->leftChild;
//insert to the left
if(current == NULL) {
parent->leftChild = tempNode;
return;
}
} //go to right of the tree
else {
current = current->rightChild;
//insert to the right
if(current == NULL) {
parent->rightChild = tempNode;
return;
}
}
}
}
}

Module-3:
Lecture-19
Graphs Terminology
A graph consists of:
 A set, V, of vertices (nodes)
 A collection, E, of pairs of vertices from V called edges (arcs)
Edges, also called arcs, are represented by (u, v) and are either:
Directed if the pairs are ordered (u, v)
u the origin
v the destination
Undirected if the pairs are unordered
A graph is a pictorial representation of a set of objects where some pairs of objects are
connected by links. The interconnected objects are represented by points termed
as vertices, and the links that connect the vertices are called edges.
Formally, a graph is a pair of sets (V, E), where V is the set of vertices and Eis the set
of edges, connecting the pairs of vertices. Take a look at the following graph −
In the above graph,
V = {a, b, c, d, e}
E = {ab, ac, bd, cd, de}
Then a graph can be:
Directed graph (di-graph) if all the edges are directed
Undirected graph (graph) if all the edges are undirected
Mixed graph if edges are both directed or undirected
Illustrate terms on graphs
End-vertices of an edge are the endpoints of the edge.
Two vertices are adjacent if they are endpoints of the same edge.
An edge is incident on a vertex if the vertex is an endpoint of the edge.
Outgoing edges of a vertex are directed edges that the vertex is the origin.
Incoming edges of a vertex are directed edges that the vertex is the destination.
Degree of a vertex, v, denoted deg(v) is the number of incident edges.
Out-degree, outdeg(v), is the number of outgoing edges.
In-degree, indeg(v), is the number of incoming edges.
Parallel edges or multiple edges are edges of the same type and end-vertices
Self-loop is an edge with the end vertices the same vertex

Simple graphs have no parallel edges or self-loops
Properties
If graph, G, has m edges then Σv∈G deg(v) = 2m
If a di-graph, G, has m edges then
Σv∈G indeg(v) = m = Σv∈G outdeg(v)
If a simple graph, G, has m edges and n vertices:
If G is also directed then m ≤ n(n-1)
If G is also undirected then m ≤ n(n-1)/2
So a simple graph with n vertices has O(n2
) edges at most
More Terminology
Path is a sequence of alternating vetches and edges such that each successive vertex
is connected by the edge. Frequently only the vertices are listed especially if there are
no parallel edges.
Cycle is a path that starts and end at the same vertex.
Simple path is a path with distinct vertices.
Directed path is a path of only directed edges
Directed cycle is a cycle of only directed edges.
Sub-graph is a subset of vertices and edges.
Spanning sub-graph contains all the vertices.
Connected graph has all pairs of vertices connected by at least one path.
Connected component is the maximal connected sub-graph of a unconnected graph.
Forest is a graph without cycles.
Tree is a connected forest (previous type of trees are called rooted trees, these are free
trees)
Spanning tree is a spanning subgraph that is also a tree.
More Properties
If G is an undirected graph with n vertices and m edges:
 If G is connected then m ≥ n - 1
 If G is a tree then m = n - 1
 If G is a forest then m ≤ n – 1
Graph Traversal:
1. Depth First Search
2. Breadth First Search

Lecture-20
Depth First Search:
Depth First Search (DFS) algorithm traverses a graph in a depthward motion and uses
a stack to remember to get the next vertex to start a search, when a dead end occurs
in any iteration.
As in the example given above, DFS algorithm traverses from S to A to D to G to E to
B first, then to F and lastly to C. It employs the following rules.
 Rule 1 − Visit the adjacent unvisited vertex. Mark it as visited. Display it. Push it
in a stack.
 Rule 2 − If no adjacent vertex is found, pop up a vertex from the stack. (It will
pop up all the vertices from the stack, which do not have adjacent vertices.)
 Rule 3 − Repeat Rule 1 and Rule 2 until the stack is empty.
Step Traversal Description
1
Initialize the stack.

2
Mark S as visited and put it
onto the stack. Explore any
unvisited adjacent node
from S. We have three nodes
and we can pick any of them.
For this example, we shall
take the node in an
alphabetical order.
3
Mark A as visited and put it
onto the stack. Explore any
unvisited adjacent node from
A. Both Sand D are adjacent
to A but we are concerned for
unvisited nodes only.
4
Visit D and mark it as visited
and put onto the stack. Here,
we have B and C nodes,
which are adjacent to D and
both are unvisited. However,
we shall again choose in an
alphabetical order.
5
We choose B, mark it as
visited and put onto the stack.
Here Bdoes not have any
unvisited adjacent node. So,
we pop Bfrom the stack.

6
We check the stack top for
return to the previous node
and check if it has any
unvisited nodes. Here, we
find D to be on the top of the
stack.
7
Only unvisited adjacent node
is from D is C now. So we
visit C, mark it as visited and
put it onto the stack.
As C does not have any unvisited adjacent node so we keep popping the stack until we
find a node that has an unvisited adjacent node. In this case, there's none and we keep
popping until the stack is empty.

Lecture-21
Breadth First Search
Breadth First Search (BFS) algorithm traverses a graph in a breadthward motion and
uses a queue to remember to get the next vertex to start a search, when a dead end
occurs in any iteration.
As in the example given above, BFS algorithm traverses from A to B to E to F first then
to C and G lastly to D. It employs the following rules.
 Rule 1 − Visit the adjacent unvisited vertex. Mark it as visited. Display it. Insert it
in a queue.
 Rule 2 − If no adjacent vertex is found, remove the first vertex from the queue.
 Rule 3 − Repeat Rule 1 and Rule 2 until the queue is empty.
Step Traversal Description
1
Initialize the queue.

2
We start from
visiting S(starting node), and
mark it as visited.
3
We then see an unvisited
adjacent node from S. In this
example, we have three nodes
but alphabetically we
choose A, mark it as visited
and enqueue it.
4
Next, the unvisited adjacent
node from S is B. We mark it
as visited and enqueue it.
5
Next, the unvisited adjacent
node from S is C. We mark it
as visited and enqueue it.

6
Now, S is left with no unvisited
adjacent nodes. So, we
dequeue and find A.
7
From A we have D as
unvisited adjacent node. We
mark it as visited and enqueue
it.
At this stage, we are left with no unmarked (unvisited) nodes. But as per the algorithm
we keep on dequeuing in order to get all unvisited nodes. When the queue gets
emptied, the program is over.

Lecture-22
Graph representation
You can represent a graph in many ways. The two most common ways of representing
a graph is as follows:
Adjacency matrix
An adjacency matrix is a VxV binary matrix A. Element Ai,j is 1 if there is an edge from
vertex i to vertex j else Ai,jis 0.
Note: A binary matrix is a matrix in which the cells can have only one of two possible
values - either a 0 or 1.
The adjacency matrix can also be modified for the weighted graph in which instead of
storing 0 or 1 in Ai,j, the weight or cost of the edge will be stored.
In an undirected graph, if Ai,j = 1, then Aj,i = 1. In a directed graph, if Ai,j = 1,
then Aj,i may or may not be 1.
Adjacency matrix provides constant time access (O(1) ) to determine if there is an
edge between two nodes. Space complexity of the adjacency matrix is O(V2).
The adjacency matrix of the following graph is:
i/j : 1 2 3 4
1 : 0 1 0 1
2 : 1 0 1 0
3 : 0 1 0 1
4 : 1 0 1 0
The adjacency matrix of the following graph is:
i/j: 1 2 3 4
1 : 0 1 0 0
2 : 0 0 0 1
3 : 1 0 0 1
4 : 0 1 0 0

Adjacency list
The other way to represent a graph is by using an adjacency list. An adjacency list is an
array A of separate lists. Each element of the array Ai is a list, which contains all the
vertices that are adjacent to vertex i.
For a weighted graph, the weight or cost of the edge is stored along with the vertex in
the list using pairs. In an undirected graph, if vertex j is in list Ai then vertex i will be in
list Aj.
The space complexity of adjacency list is O(V + E) because in an adjacency list
information is stored only for those edges that actually exist in the graph. In a lot of
cases, where a matrix is sparse using an adjacency matrix may not be very useful. This
is because using an adjacency matrix will take up a lot of space where most of the
elements will be 0, anyway. In such cases, using an adjacency list is better.
Note: A sparse matrix is a matrix in which most of the elements are zero, whereas a
dense matrix is a matrix in which most of the elements are non-zero.
Consider the same undirected graph from an adjacency matrix. The adjacency list of the
graph is as follows:
A1 → 2 → 4
A2 → 1 → 3
A3 → 2 → 4

A4 → 1 → 3
Consider the same directed graph from an adjacency matrix. The adjacency list of the
graph is as follows:
A1 → 2
A2 → 4
A3 → 1 → 4
A4 → 2

Lecture-23
Topological Sorting:
Topological sorting for Directed Acyclic Graph (DAG) is a linear ordering of vertices
such that for every directed edge uv, vertex u comes before v in the
ordering. Topological Sorting for a graph is not possible if the graph is not a DAG.
For example, a topological sorting of the following graph is “5 4 2 3 1 0”. There can be
more than one topological sorting for a graph. For example, another topological sorting
of the following graph is “4 5 2 3 1 0”. The first vertex in topological sorting is always a
vertex with in-degree as 0 (a vertex with no in-coming edges).
Algorithm to find Topological Sorting:
In DFS, we start from a vertex, we first print it and then recursively call DFS for its
adjacent vertices. In topological sorting, we use a temporary stack. We don’t print the
vertex immediately, we first recursively call topological sorting for all its adjacent
vertices, then push it to a stack. Finally, print contents of stack. Note that a vertex is
pushed to stack only when all of its adjacent vertices (and their adjacent vertices and so
on) are already in stack.
Topological Sorting vs Depth First Traversal (DFS):
In DFS, we print a vertex and then recursively call DFS for its adjacent vertices. In
topological sorting, we need to print a vertex before its adjacent vertices. For example,
in the given graph, the vertex ‘5’ should be printed before vertex ‘0’, but unlike DFS, the
vertex ‘4’ should also be printed before vertex ‘0’. So Topological sorting is different
from DFS. For example, a DFS of the shown graph is “5 2 3 1 0 4”, but it is not a
topological sorting
Dynamic Programming
The Floyd Warshall Algorithm is for solving the All Pairs Shortest Path problem. The
problem is to find shortest distances between every pair of vertices in a given edge
weighted directed Graph.
Example:
Input:
graph[][] = { {0, 5, INF, 10},
{INF, 0, 3, INF},
{INF, INF, 0, 1},
{INF, INF, INF, 0} }
which represents the following graph
10

(0)------->(3)
| /|
5 | |
| | 1
|/ |
(1)------->(2)
3
Note that the value of graph[i][j] is 0 if i is equal to j
And graph[i][j] is INF (infinite) if there is no edge from vertex i to j.
Output:
Shortest distance matrix
0 5 8 9
INF 0 3 4
INF INF 0 1
INF INF INF 0
Floyd Warshall Algorithm
We initialize the solution matrix same as the input graph matrix as a first step. Then we
update the solution matrix by considering all vertices as an intermediate vertex. The
idea is to one by one pick all vertices and update all shortest paths which include the
picked vertex as an intermediate vertex in the shortest path. When we pick vertex
number k as an intermediate vertex, we already have considered vertices {0, 1, 2, .. k-1}
as intermediate vertices. For every pair (i, j) of source and destination vertices
respectively, there are two possible cases.
1) k is not an intermediate vertex in shortest path from i to j. We keep the value of
dist[i][j] as it is.
2) k is an intermediate vertex in shortest path from i to j. We update the value of dist[i][j]
as dist[i][k] + dist[k][j].
The following figure shows the above optimal substructure property in the all-pairs
shortest path problem.

Lecture-24
BubbleSort
We take an unsorted array for our example. Bubble sort takes Ο(n2
) time so we're
keeping it short and precise.
Bubble sort starts with very first two elements, comparing them to check which one is
greater.
In this case, value 33 is greater than 14, so it is already in sorted locations. Next, we
compare 33 with 27.
We find that 27 is smaller than 33 and these two values must be swapped.
The new array should look like this −
Next we compare 33 and 35. We find that both are in already sorted positions.
Then we move to the next two values, 35 and 10.
We know then that 10 is smaller 35. Hence they are not sorted.
We swap these values. We find that we have reached the end of the array. After one
iteration, the array should look like this −
To be precise, we are now showing how an array should look like after each iteration.
After the second iteration, it should look like this −

Notice that after each iteration, at least one value moves at the end.
And when there's no swap required, bubble sorts learns that an array is completely
sorted.
Now we should look into some practical aspects of bubble sort.
Algorithm
We assume list is an array of n elements. We further assume that swapfunction
swaps the values of the given array elements.
begin BubbleSort(list)
for all elements of list
if list[i] > list[i+1]
swap(list[i], list[i+1])
end if
end for
return list
end BubbleSort
Pseudocode
We observe in algorithm that Bubble Sort compares each pair of array element unless
the whole array is completely sorted in an ascending order. This may cause a few
complexity issues like what if the array needs no more swapping as all the elements
are already ascending.
To ease-out the issue, we use one flag variable swapped which will help us see if any
swap has happened or not. If no swap has occurred, i.e. the array requires no more
processing to be sorted, it will come out of the loop.
Pseudocode of BubbleSort algorithm can be written as follows −
procedure bubbleSort( list : array of items )
loop = list.count;
for i = 0 to loop-1 do:
swapped = false

for j = 0 to loop-1 do:
/* compare the adjacent elements */
if list[j] > list[j+1] then
/* swap them */
swap( list[j], list[j+1] )
swapped = true
end if
end for
/*if no number was swapped that means
array is sorted now, break the loop.*/
if(not swapped) then
break
end if
end for
end procedure return list

Lecture-25
InsertionSort
We take an unsorted array for our example.
Insertion sort compares the first two elements.
It finds that both 14 and 33 are already in ascending order. For now, 14 is in sorted
sub-list.
Insertion sort moves ahead and compares 33 with 27.
And finds that 33 is not in the correct position.
It swaps 33 with 27. It also checks with all the elements of sorted sub-list. Here we see
that the sorted sub-list has only one element 14, and 27 is greater than 14. Hence, the
sorted sub-list remains sorted after swapping.
By now we have 14 and 27 in the sorted sub-list. Next, it compares 33 with 10.
These values are not in a sorted order.
So we swap them.
However, swapping makes 27 and 10 unsorted.

Hence, we swap them too.
Again we find 14 and 10 in an unsorted order.
We swap them again. By the end of third iteration, we have a sorted sub-list of 4 items.
This process goes on until all the unsorted values are covered in a sorted sub-list. Now
we shall see some programming aspects of insertion sort.
Algorithm
Now we have a bigger picture of how this sorting technique works, so we can derive
simple steps by which we can achieve insertion sort.
Step 1 − If it is the first element, it is already sorted. return 1;
Step 2 − Pick next element
Step 3 − Compare with all elements in the sorted sub-list
Step 4 − Shift all the elements in the sorted sub-list that is greater than the
value to be sorted
Step 5 − Insert the value
Step 6 − Repeat until list is sorted
Pseudocode
procedure insertionSort( A : array of items )
int holePosition
int valueToInsert
for i = 1 to length(A) inclusive do:
valueToInsert = A[i]
holePosition = i
while holePosition > 0 and A[holePosition-1] > valueToInsert do:
A[holePosition] = A[holePosition-1]
holePosition = holePosition -1
end while
A[holePosition] = valueToInsert
end for
end procedure

Lecture-26
SelectionSort
Consider the following depicted array as an example.
For the first position in the sorted list, the whole list is scanned sequentially. The first
position where 14 is stored presently, we search the whole list and find that 10 is the
lowest value.
So we replace 14 with 10. After one iteration 10, which happens to be the minimum
value in the list, appears in the first position of the sorted list.
For the second position, where 33 is residing, we start scanning the rest of the list in a
linear manner.
We find that 14 is the second lowest value in the list and it should appear at the second
place. We swap these values.
After two iterations, two least values are positioned at the beginning in a sorted
manner.
The same process is applied to the rest of the items in the array.
Following is a pictorial depiction of the entire sorting process −

Now, let us learn some programming aspects of selection sort.
Algorithm
Step 1 − Set MIN to location 0
Step 2 − Search the minimum element in the list
Step 3 − Swap with value at location MIN
Step 4 − Increment MIN to point to next element
Step 5 − Repeat until list is sorted

Pseudocode
procedure selection sort
list : array of items
n : size of list
for i = 1 to n - 1
/* set current element as minimum*/
min = i
/* check the element to be minimum */
for j = i+1 to n
if list[j] < list[min] then
min = j;
end if
end for
/* swap the minimum element with the current element*/
if indexMin != i then
swap list[min] and list[i]
end if
end for
end procedure

Lecture-27
Merge Sort
To understand merge sort, we take an unsorted array as the following −
We know that merge sort first divides the whole array iteratively into equal halves
unless the atomic values are achieved. We see here that an array of 8 items is divided
into two arrays of size 4.
This does not change the sequence of appearance of items in the original. Now we
divide these two arrays into halves.
We further divide these arrays and we achieve atomic value which can no more be
divided.
Now, we combine them in exactly the same manner as they were broken down. Please
note the color codes given to these lists.
We first compare the element for each list and then combine them into another list in a
sorted manner. We see that 14 and 33 are in sorted positions. We compare 27 and 10
and in the target list of 2 values we put 10 first, followed by 27. We change the order of
19 and 35 whereas 42 and 44 are placed sequentially.
In the next iteration of the combining phase, we compare lists of two data values, and
merge them into a list of found data values placing all in a sorted order.
After the final merging, the list should look like this −
Now we should learn some programming aspects of merge sorting.
Algorithm

Merge sort keeps on dividing the list into equal halves until it can no more be divided.
By definition, if it is only one element in the list, it is sorted. Then, merge sort combines
the smaller sorted lists keeping the new list sorted too.
Step 1 − if it is only one element in the list it is already sorted, return.
Step 2 − divide the list recursively into two halves until it can no more be divided.
Step 3 − merge the smaller lists into new list in sorted order.
Merge sort works with recursion and we shall see our implementation in the same way.
procedure mergesort( var a as array )
if ( n == 1 ) return a
var l1 as array = a[0] ... a[n/2]
var l2 as array = a[n/2+1] ... a[n]
l1 = mergesort( l1 )
l2 = mergesort( l2 )
return merge( l1, l2 )
end procedure
procedure merge( var a as array, var b as array )
var c as array
while ( a and b have elements )
if ( a[0] > b[0] )
add b[0] to the end of c
remove b[0] from b
else
add a[0] to the end of c
remove a[0] from a
end if
end while
while ( a has elements )
add a[0] to the end of c
remove a[0] from a
end while
while ( b has elements )
add b[0] to the end of c
remove b[0] from b
end while
return c
end procedure

Lecture-28
Quick sort
Quick sort is a highly efficient sorting algorithm and is based on partitioning of array of
data into smaller arrays. A large array is partitioned into two arrays one of which holds
values smaller than the specified value, say pivot, based on which the partition is made
and another array holds values greater than the pivot value.
Quick sort partitions an array and then calls itself recursively twice to sort the two
resulting subarrays. This algorithm is quite efficient for large-sized data sets as its
average and worst case complexity are of Ο(n2
), where n is the number of items.
PartitioninQuickSort
Following animated representation explains how to find the pivot value in an array.
The pivot value divides the list into two parts. And recursively, we find the pivot for
each sub-lists until all lists contains only one element.
Quick Sort Pivot Algorithm
Based on our understanding of partitioning in quick sort, we will now try to write an
algorithm for it, which is as follows.
Step 1 − Choose the highest index value has pivot
Step 2 − Take two variables to point left and right of the list excluding pivot
Step 3 − left points to the low index
Step 4 − right points to the high
Step 5 − while value at left is less than pivot move right
Step 6 − while value at right is greater than pivot move left
Step 7 − if both step 5 and step 6 does not match swap left and right
Step 8 − if left ≥ right, the point where they met is new pivot
Quick Sort Pivot Pseudocode
The pseudocode for the above algorithm can be derived as −
function partitionFunc(left, right, pivot)
leftPointer = left
rightPointer = right - 1
while True do
while A[++leftPointer] < pivot do

//do-nothing
end while
while rightPointer > 0 && A[--rightPointer] > pivot do
//do-nothing
end while
if leftPointer >= rightPointer
break
else
swap leftPointer,rightPointer
end if
end while
swap leftPointer,right
return leftPointer
end function
Quick Sort Algorithm
Using pivot algorithm recursively, we end up with smaller possible partitions. Each
partition is then processed for quick sort. We define recursive algorithm for quicksort as
follows −
Step 1 − Make the right-most index value pivot
Step 2 − partition the array using pivot value
Step 3 − quicksort left partition recursively
Step 4 − quicksort right partition recursively
Quick Sort Pseudocode
To get more into it, let see the pseudocode for quick sort algorithm −
procedure quickSort(left, right)
if right-left <= 0
return
else
pivot = A[right]
partition = partitionFunc(left, right, pivot)
quickSort(left,partition-1)
quickSort(partition+1,right)
end if
end procedure

Lecture-29
Heap Sort
Heap sort is a comparison based sorting technique based on Binary Heap data
structure. It is similar to selection sort where we first find the maximum element and
place the maximum element at the end. We repeat the same process for remaining
element.
What is Binary Heap?
Let us first define a Complete Binary Tree. A complete binary tree is a binary tree in
which every level, except possibly the last, is completely filled, and all nodes are as far
left as possible
A Binary Heap is a Complete Binary Tree where items are stored in a special order
such that value in a parent node is greater(or smaller) than the values in its two children
nodes. The former is called as max heap and the latter is called min heap. The heap
can be represented by binary tree or array.
Why array based representation for Binary Heap?
Since a Binary Heap is a Complete Binary Tree, it can be easily represented as array
and array based representation is space efficient. If the parent node is stored at index I,
the left child can be calculated by 2 * I + 1 and right child by 2 * I + 2 (assuming the
indexing starts at 0).
Heap Sort Algorithm for sorting in increasing order:
1. Build a max heap from the input data.
2. At this point, the largest item is stored at the root of the heap. Replace it with the last
item of the heap followed by reducing the size of heap by 1. Finally, heapify the root of
tree.
3. Repeat above steps while size of heap is greater than 1.
How to build the heap?
Heapify procedure can be applied to a node only if its children nodes are heapified. So
the heapification must be performed in the bottom up order.
Lets understand with the help of an example:
Input data: 4, 10, 3, 5, 1
4(0)
/
10(1) 3(2)
/
5(3) 1(4)
The numbers in bracket represent the indices in the array
representation of data.

Applying heapify procedure to index 1:
4(0)
/
10(1) 3(2)
/
5(3) 1(4)
Applying heapify procedure to index 0:
10(0)
/
5(1) 3(2)
/
4(3) 1(4)
The heapify procedure calls itself recursively to build heap
in top down manner.
Radix Sort
The lower bound for Comparison based sorting algorithm (Merge Sort, Heap Sort,
Quick-Sort .. etc) is Ω(nLogn), i.e., they cannot do better than nLogn.
Counting sort is a linear time sorting algorithm that sort in O(n+k) time when elements
are in range from 1 to k.
What if the elements are in range from 1 to n2
?
We can’t use counting sort because counting sort will take O(n2
) which is worse than
comparison based sorting algorithms. Can we sort such an array in linear time?
Radix Sort is the answer. The idea of Radix Sort is to do digit by digit sort starting from
least significant digit to most significant digit. Radix sort uses counting sort as a
subroutine to sort.

Lecture-30
Radix Sort
1) Do following for each digit i where i varies from least significant digit to the most
significant digit.
………….a) Sort input array using counting sort (or any stable sort) according to the i’th
digit.
Example:
Original, unsorted list:
170, 45, 75, 90, 802, 24, 2, 66
Sorting by least significant digit (1s place) gives: [*Notice that we keep 802 before 2,
because 802 occurred before 2 in the original list, and similarly for pairs 170 & 90 and
45 & 75.]
170, 90, 802, 2, 24, 45, 75, 66
Sorting by next digit (10s place) gives: [*Notice that 802 again comes before 2 as 802
comes before 2 in the previous list.]
802, 2, 24, 45, 66, 170, 75, 90
Sorting by most significant digit (100s place) gives:
2, 24, 45, 66, 75, 90, 170, 802
What is the running time of Radix Sort?
Let there be d digits in input integers. Radix Sort takes O(d*(n+b)) time where b is the
base for representing numbers, for example, for decimal system, b is 10. What is the
value of d? If k is the maximum possible value, then d would be O(logb(k)). So overall
time complexity is O((n+b) * logb(k)). Which looks more than the time complexity of
comparison based sorting algorithms for a large k. Let us first limit k. Let k <= nc
where
c is a constant. In that case, the complexity becomes O(nLogb(n)). But it still doesn’t
beat comparison based sorting algorithms.
Linear Search
Linear search is to check each element one by one in sequence. The following
method linearSearch() searches a target in an array and returns the index of the target; if
not found, it returns -1, which indicates an invalid index.
1
2
3
4
5
6
7
8
9
int linearSearch(int arr[], int target)
{
for (int i = 0; i < arr.length; i++)
{
if (arr[i] == target)
return i;
}
return -1;
}

Linear search loops through each element in the array; each loop body takes constant
time. Therefore, it runs in linear time O(n).
Lecture-31
Binary Search
For sorted arrays, binary search is more efficient than linear search. The process starts
from the middle of the input array:
 If the target equals the element in the middle, return its index.
 If the target is larger than the element in the middle, search the right half.
 If the target is smaller, search the left half.
In the following binarySearch() method, the two index variables first and last indicates the
searching boundary at each round.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
int binarySearch(int arr[], int target)
{
int first = 0, last = arr.length - 1;
while (first <= last)
{
int mid = (first + last) / 2;
if (target == arr[mid])
return mid;
if (target > arr[mid])
first = mid + 1;
else
last = mid - 1;
}
return -1;
}
1
2
3
4
5
6
7
8
9
10
11
12
arr: {3, 9, 10, 27, 38, 43, 82}
target: 10
first: 0, last: 6, mid: 3, arr[mid]: 27 -- go left
first: 0, last: 2, mid: 1, arr[mid]: 9 -- go right
first: 2, last: 2, mid: 2, arr[mid]: 10 -- found
target: 40
first: 4, last: 6, mid: 5, arr[mid]: 43 -- go left
first: 5, last: 4 -- not found

Binary search divides the array in the middle at each round of the loop. Suppose the
array has length n and the loop runs in t rounds, then we have n * (1/2)^t = 1 since at
each round the array length is divided by 2. Thus t = log(n). At each round, the loop
body takes constant time. Therefore, binary search runs in logarithmic time O(log n).
The following code implements binary search using recursion. To call the method, we
need provide with the boundary indexes, for example,
binarySearch(arr, 0, arr.length - 1, target);
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
binarySearch(int arr[], int first, int last, int target)
{
if (first > last)
return -1;
int mid = (first + last) / 2;
if (target == arr[mid])
return mid;
if (target > arr[mid])
return binarySearch(arr, mid + 1, last, target);
// target < arr[mid]
return binarySearch(arr, first, mid - 1, target);
}

Lecture-32
Hashing
Introduction
The problem at hands is to speed up
searching. Consider the problem of
searching an array for a given value. If
the array is not sorted, the search might
require examining each and all
elements of the array. If the array is
sorted, we can use the binary search,
and therefore reduce the worse-case
runtime complexity to O(log n). We
could search even faster if we know in
advance the index at which that value is
located in the array. Suppose we do
have that magic function that would tell
us the index for a given value. With this
magic function our search is reduced to
just one probe, giving us a constant
runtime O(1). Such a function is called
a hash function . A hash function is a
function which when given a key,
generates an address in the table.
The example of a hash function is a book call number. Each book in the library has
a unique call number. A call number is like an address: it tells us where the book is
located in the library. Many academic libraries in the United States, uses Library of
Congress Classification for call numbers. This system uses a combination of letters and
numbers to arrange materials by subjects.
A hash function that returns a unique hash number is called a universal hash function.
In practice it is extremely hard to assign unique numbers to objects. The later is always
possible only if you know (or approximate) the number of objects to be proccessed.
Thus, we say that our hash function has the following properties
 it always returns a number for an object.
 two equal objects will always have the same number
 two unequal objects not always have different numbers
The precedure of storing objets using a hash function is the following.
Create an array of size M. Choose a hash function h, that is a mapping from
objects into integers 0, 1, ..., M-1. Put these objects into an array at indexes
computed via the hash function index = h(object). Such array is called a hash
table.

Collisions
When we put objects into a hashtable, it is possible that different objects (by
the equals() method) might have the same hashcode. This is called a collision. Here is
the example of collision. Two different strings ""Aa" and "BB" have the same key: .
"Aa" = 'A' * 31 + 'a' = 2112
"BB" = 'B' * 31 + 'B' = 2112
How to resolve collisions? Where do we put
the second and subsequent values that hash
to this same location? There are several
approaches in dealing with collisions. One of
them is based on idea of putting the keys that
collide in a linked list! A hash table then is an
array of lists!! This technique is called
a separate chaining collision resolution.
The big attraction of using a hash table is a constant-time performance for the basic
operations add, remove, contains, size. Though, because of collisions, we cannot guarantee
the constant runtime in the worst-case. Why? Imagine that all our objects collide into the
same index. Then searching for one of them will be equivalent to searching in a list, that
takes a liner runtime. However, we can guarantee an expected constant runtime, if we
make sure that our lists won't become too long. This is usually implemnted by
maintaining a load factor that keeps a track of the average length of lists. If a load factor
approaches a set in advanced threshold, we create a bigger array and rehash all
elements from the old table into the new one.
Another technique of collision resolution is a linear probing. If we cannoit insert at index
k, we try the next slot k+1. If that one is occupied, we go to k+2, and so on.

Lecture-33
Hashing Functions
Choosing a good hashing function, h(k), is essential for hash-table based
searching. h should distribute the elements of our collection as uniformly as possible to
the "slots" of the hash table. The key criterion is that there should be a minimum
number of collisions.
If the probability that a key, k, occurs in our collection is P(k), then if there are m slots in
our hash table, a uniform hashing function, h(k), would ensure:
Sometimes, this is easy to ensure. For example, if the keys are randomly distributed in
(0,r], then,
h(k) = floor((mk)/r)
will provide uniform hashing.
Mapping keys to natural numbers
Most hashing functions will first map the keys to some set of natural numbers, say (0,r].
There are many ways to do this, for example if the key is a string of ASCII characters,
we can simply add the ASCII representations of the characters mod 255 to produce a
number in (0,255) - or we could xor them, or we could add them in pairs mod 216
-1, or
...
Having mapped the keys to a set of natural numbers, we then have a number of
possibilities.
1. Use a mod function:
h(k) = k mod m.
When using this method, we usually avoid certain values of m. Powers of 2 are
usually avoided, for k mod 2b
simply selects the b low order bits of k. Unless we
know that all the 2b
possible values of the lower order bits are equally likely, this
will not be a good choice, because some bits of the key are not used in the hash
function.
Prime numbers which are close to powers of 2 seem to be generally good
choices for m.
For example, if we have 4000 elements, and we have chosen an overflow table
organization, but wish to have the probability of collisions quite low, then we
might choose m = 4093. (4093 is the largest prime less than 4096 = 212
.)
2. Use the multiplication method:
o Multiply the key by a constant A, 0 < A < 1,
o Extract the fractional part of the product,
o Multiply this value by m.
Thus the hash function is:
h(k) = floor(m * (kA - floor(kA)))

In this case, the value of m is not critical and we typically choose a power of 2 so
that we can get the following efficient procedure on most digital computers:
o Choose m = 2p
.
o Multiply the w bits of k by floor(A * 2w
) to obtain a 2w bit product.
o Extract the p most significant bits of the lower half of this product.
It seems that:
A = (sqrt(5)-1)/2 = 0.6180339887
is a good choice (see Knuth, "Sorting and Searching", v. 3 of "The Art of
Computer Programming").
3. Use universal hashing:
A malicious adversary can always chose the keys so that they all hash to the
same slot, leading to an average O(n) retrieval time. Universal hashing seeks to
avoid this by choosing the hashing function randomly from a collection of hash
functions (cf Cormen et al, p 229- ). This makes the probability that the hash
function will generate poor behaviour small and produces good average
performance.

DS Complete notes for Computer science and Engineering

More Related Content

Similar to DS Complete notes for Computer science and Engineering (20)

Recently uploaded (20)

DS Complete notes for Computer science and Engineering