SlideShare a Scribd company logo

Ekeeda - Electronics & Telecommunication Syllabus

•
E
EkeedaPvtLtd

The document outlines the revised syllabus for the Electronics and Telecommunication Engineering program at the University of Mumbai, effective from the academic years 2017-2018 to 2019-2020, emphasizing outcome-based education and a choice-based credit and grading system. It describes the curriculum structure across various semesters, including course descriptions, teaching schemes, credits, and examination schemes, involving a combination of theoretical and practical components. Additionally, it highlights the involvement of senior faculty and industry experts in curriculum development to ensure quality and relevance in engineering education.

Engineering
1 of 64
Download to read offline
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
Ekeeda – Electronics & Telecommunication Engineering AC-11.05.2017 Item No. 4.307 UNIVERSITY OF MUMBAI Revised syllabus (Rev- 2016) from Academic Year 2016 -17 Under FACULTY OF TECHNOLOGY Electronics and Telecommunication Engineering Second Year with Effect from AY 2017-18 Third Year with Effect from AY 2018-19 Final Year with Effect from AY 2019-20 As per Choice Based Credit and Grading System with effect from the AY 2016–17
2 Ekeeda – Electronics & Telecommunication Engineering Co-ordinator, Faculty of Technology’s Preamble: To meet the challenge of ensuring excellence in engineering education, the issue of quality needs to be addressed, debated and taken forward in a systematic manner. Accreditation is the principal means of quality assurance in higher education. The major emphasis of accreditation process is to measure the outcomes of the program that is being accredited. In line with this Faculty of Technology of University of Mumbai has taken a lead in incorporating philosophy of outcome based education in the process of curriculum development. Faculty of Technology, University of Mumbai, in one of its meeting unanimously resolved that, each Board of Studies shall prepare some Program Educational Objectives (PEO‟s) and give freedom to affiliated Institutes to add few (PEO‟s). It is also resolved that course objectives and course outcomes are to be clearly defined for each course, so that all faculty members in affiliated institutes understand the depth and approach of course to be taught, which will enhance learner‟s learning process. It was also resolved that, maximum senior faculty from colleges and experts from industry to be involved while revising the curriculum. I am happy to state that, each Board of studies has adhered to the resolutions passed by Faculty of Technology, and developed curriculum accordingly. In addition to outcome based education, semester based credit and grading system is also introduced to ensure quality of engineering education. Choice based Credit and Grading system enables a much-required shift in focus from teacher-centric to learner-centric education since the workload estimated is based on the investment of time in learning and not in teaching. It also focuses on continuous evaluation which will enhance the quality of education. University of Mumbai has taken a lead in implementing the system through its affiliated Institutes and Faculty of Technology has devised a transparent credit assignment policy and adopted ten points scale to grade learner‟s performance. Credit assignment for courses is based on 15 weeks teaching learning process, however content of courses is to be taught in 12-13 weeks and remaining 2-3 weeks to be utilized for revision, guest lectures, coverage of content beyond syllabus etc. Choice based Credit and grading system is implementedfrom the academic year 2016-17 through optional courses at department and institute level. This will be effective for SE, TE and BE from academic year 2017-18, 2018-19 and 2019-20 respectively. Dr. S. K. Ukarande Co-ordinator, Faculty of Technology, Member - Academic Council University of Mumbai, Mumbai
3 Ekeeda – Electronics & Telecommunication Engineering Chairman’s Preamble: The curriculum in higher education is a living entity. It evolves with time; it reflects the ever changing needs of the society and keeps pace with the growing talent of the students and the faculty. The engineering education in India is expanding in manifolds and the main challenge is the quality of education. All stakeholders are very much concerned about it. The curriculum of Electronics & Telecommunication in Mumbai University is no exception. In keeping with the demands of the changing times, it contains innovative features. The exposure to the latest technology and tools used all over the world is given by properly selecting the subjects. It is designed in such a way to incorporate the requirements of various industries. The major emphasis of this process is to measure the outcomes of the program. Program outcomes are essentially a range of skills and knowledge that a student will have at the time of post-graduation. So the curriculum must be refined and updated to ensure that the defined objectives and outcomes are achieved. I, as Chairman Ad-hoc Board of Studies in Electronics and Telecommunication Engineering, University of Mumbai, happy to state here that, the heads of the department and senior faculty from various institutes took timely and valuable initiative to frame the Program Educational objectives as listed below. Objectives:  To produce Electronics & Telecommunication engineers, having strong theoretical foundation, good design experience and exposure to research and development.  To produce researcher who have clear thinking, articulation and interest to carry out theoretical and/or applied research resulting in significant advancement in the field of specialization.  To develop an ability to identify, formulate and solve electronics and telecommunication engineering problems in the latest technology.  To develop the ability among students to synthesize data and technical concepts from applications to product design. These are the suggested and expected main objectives, individual affiliated institutes may add further in the list. I believe that the small step taken in the right direction will definitely help in providing quality education to the stake holders. This book of curricula is the culmination of large number of faculty members and supporting staff. It also reflects the creative contribution of hundreds of teachers – both serving and retired. I sincerely hope that the faculty and students of Electronics and Telecommunication in Mumbai University will take full advantage of dynamic features of curriculum and make teaching-learning process a truly sublime experience for all. At the end I must extend my gratitude to all experts and colleagues who contributed to make curriculum competent at par with latest technological development in the field of Electronics & Telecommunication Engineering. Dr. Uttam D. Kolekar Chairman, Ad-hoc Board of Studies in Electronics and Telecommunication Engineering
4 Ekeeda – Electronics & Telecommunication Engineering Program Structure for B.E. Electronics & Telecommunication Engineering (Rev. 2016) University of Mumbai (With Effect from 2017-2018) Semester III Course Code Course Name Teaching Scheme (Contact Hours) Credits Assigned Theory Pracs Tut Theory TW/ Pracs Total ECC301 Applied Mathematics- III 4 - 2@ 4 1 5 ECC302 Electronic Devices and Circuits I 4 - - 4 - 4 ECC303 Digital System Design 4 - - 4 - 4 ECC304 Circuit Theory and Networks 4 - 2@ 4 1 5 ECC305 Electronic Instrumentation and Control 4 - 2@ 4 1 5 ECL301 Electronic Devices and Circuits I Laboratory - 2 - - 1 1 ECL302 Digital System Design Laboratory - 2 - - 1 1 ECL303 OOP using JAVA Laboratory - 2 - - 1 1 Total 20 6 6 20 6 26 @ 2 hour to be taken as tutorial classwise Course Code Course Name Examination Scheme Theory TW Oral/ Prac Total Internal Assessment EndSem Exam Exam Duration (Hrs)Test1 Test 2 Avg ECC301 Applied Mathematics-III 20 20 20 80 03 25 -- 125 ECC302 Electronic Devices and Circuits I 20 20 20 80 03 -- -- 100 ECC303 Digital System Design 20 20 20 80 03 -- -- 100 ECC304 Circuit Theory and Networks 20 20 20 80 03 25 -- 125 ECC305 Electronic Instrumentation and Control 20 20 20 80 03 25 -- 125 ECL301 Electronic Devices and Circuits I Laboratory -- -- -- -- -- 25 25 50 ECL302 Digital System Design Laboratory -- -- -- -- -- 25 25 50 ECL303 OOP using JAVA Laboratory -- -- -- -- -- 25 25 50 Total 100 400 150 75 725
5 Ekeeda – Electronics & Telecommunication Engineering Semester IV Course Code Course Name Teaching Scheme (Contact Hours) Credits Assigned Theory Pracs Tut Theory TW/ Pracs Total ECC401 Applied Mathematics- IV 4 - 2@ 4 1 5 ECC402 Electronic Devices and Circuits II 4 - - 4 - 4 ECC403 Linear Integrated Circuits 4 - - 4 - 4 ECC404 Signals & Systems 4 - 2@ 4 1 5 ECC405 Principles of Communication Engineering 4 - - 4 - 4 ECL401 Electronic Devices and Circuits II Laboratory - 2 - - 1 1 ECL402 Linear Integrated Circuits Laboratory - 2 - - 1 1 ECL403 Principles of Communication Engineering Laboratory - 2 - - 1 1 Total 20 6 4 20 5 25 @ 2 hour to be taken as tutorial classwise Course Code Course Name Examination Scheme Theory TW Oral & Prac Total Internal Assessment End Sem Exam Exam Duration (Hrs)Test1 Test 2 Avg ECC401 Applied Mathematics- IV 20 20 20 80 03 25 -- 125 ECC402 Electronic Devices and Circuits II 20 20 20 80 03 -- -- 100 ECC403 Linear Integrated Circuits 20 20 20 80 03 -- -- 100 ECC404 Signals & Systems 20 20 20 80 03 25 -- 125 ECC405 Principles of Communication Engineering 20 20 20 80 03 -- -- 100 ECL401 Electronic Devices and Circuits II Laboratory -- -- -- -- -- 25 25 50 ECL402 Linear Integrated Circuits Laboratory -- -- -- -- -- 25 25 50 ECL403 Principles of Communication Engineering Laboratory -- -- -- -- -- 25 25 50 Total 100 400 125 75 700
6 Ekeeda – Electronics & Telecommunication Engineering Semester V Course Code Course Name Teaching Scheme (Contact Hours) Credits Assigned Theory Pracs Tut Theory TW/ Pracs Total ECC501 Microprocessor & Peripherals Interfacing 4 - - 4 - 4 ECC502 Digital Communication 4 - - 4 - 4 ECC503 Electromagnetic Engineering 4 - 1@ 4 1 5 ECC504 Discrete Time Signal Processing 4 - - 4 - 4 ECCDLO 501X Department Level Optional Course I 4 - - 4 - 4 ECL501 Microprocessor & Peripherals Interfacing Lab - 2 - - 1 1 ECL502 Digital Communication Lab - 2 - - 1 1 ECL503 Business Communication & Ethics Lab - 2+2* - - 2 2 ECL504 Open Source Technology for Communication Lab - 2 - - 1 1 ECLDLO 501X Department Level Optional Lab I - - 2# - 1 1 Total 20 10 3 20 7 27 @ 1 hour to be taken as tutorial classwise #2 hours to be taken as either lab or tutorial based on subject requirement *2 hours to be taken as tutorial batchwise Course Code Course Name Examination Scheme Theory TW Oral/ Prac Total Internal Assessment EndSem Exam Exam Duration (Hrs)Test1 Test 2 Avg ECC501 Microprocessor & Peripherals Interfacing 20 20 20 80 03 -- -- 100 ECC502 Digital Communication 20 20 20 80 03 -- -- 100 ECC503 Electromagnetic Engineering 20 20 20 80 03 25 -- 125 ECC504 Discrete Time Signal Processing 20 20 20 80 03 -- -- 100 ECCDLO 501X Department Level Optional Course I 20 20 20 80 03 -- -- 100 ECL501 Microprocessor & Peripherals Interfacing Lab -- -- -- -- -- 25 25 50 ECL502 Digital Communication Lab -- -- -- -- -- 25 25 50 ECL503 Business Communication & Ethics Lab -- -- -- -- -- 50 -- 50 ECL504 Open Source Technology for Communication Lab -- -- -- -- -- 25 25 50 ECLDLO 501X Department Level Optional Lab I -- -- -- -- -- 25 -- 25 Total 100 400 175 75 750
7 Ekeeda – Electronics & Telecommunication Engineering Course Code Department Level Optional Course I ECCDLO 5011 Microelectronics ECCDLO 5012 TV & Video Engineering ECCDLO 5013 Finite Automata Theory ECCDLO 5014 Data Compression and Encryption
8 Ekeeda – Electronics & Telecommunication Engineering Semester VI Course Code Course Name Teaching Scheme (Contact Hours) Credits Assigned Theory Pracs Tut Theory TW/ Pracs Total ECC601 Microcontrollers & Applications 4 - -- 4 -- 4 ECC602 Computer Communication Networks 4 - - 4 - 4 ECC603 Antenna & Radio Wave Propagation 4 - - 4 - 4 ECC604 Image Processing and Machine Vision 4 - -- 4 -- 4 ECCDLO 602X Department Level Optional Course II 4 - - 4 - 4 ECL601 Microcontroller & Applications Lab - 2 - - 1 1 ECL602 Computer Communication Network Lab - 2 - - 1 1 ECL603 Antenna & Radio Wave Propagation Lab - 2 - - 1 1 ECL604 Image Processing and Machine Vision Lab - 2 - - 1 1 ECLDLO 602X Department Level Optional Lab II - 2 - - 1 1 Total 20 10 - 20 5 25 Course Code Course Name Examination Scheme Theory TW Oral & Prac Total Internal Assessment End Sem Exam Exam Duration (Hrs)Test1 Test 2 Avg ECC601 Microcontroller& Applications 20 20 20 80 03 -- -- 100 ECC602 Computer Communication Network 20 20 20 80 03 -- -- 100 ECC603 Antenna & Radio Wave Propagation 20 20 20 80 03 -- -- 100 ECC604 Image Processing and Machine Vision Lab 20 20 20 80 03 -- -- 100 ECCDLO 602X Department Level Optional Course II 20 20 20 80 03 -- -- 100 ECL601 Microcontroller & Applications Lab -- -- -- -- -- 25 25 50 ECL602 Computer Communication Network Lab -- -- -- -- -- 25 25 50 ECL603 Antenna & Radio Wave Propagation Lab -- -- -- -- -- 25 25 50 ECL604 Image Processing and Machine Vision Lab -- -- -- -- -- 25 25 50
9 Ekeeda – Electronics & Telecommunication Engineering ECLDLO 602X Department Level Optional Lab II -- -- -- -- -- 25 -- 25 Total 100 400 125 100 725
10 Ekeeda – Electronics & Telecommunication Engineering Course Code Department Level Optional Course II ECCDLO 6021 Digital VLSI Design ECCDLO 6022 Radar Engineering ECCDLO 6023 Database Management System ECCDLO 6024 Audio Processing
11 Ekeeda – Electronics & Telecommunication Engineering Semester VII Course Code Course Name Teaching Scheme (Contact Hours) Credits Assigned Theory Pracs Tut Theory TW/ Pracs Total ECC701 Microwave Engineering 4 - - 4 - 4 ECC702 Mobile Communication System 4 - - 4 - 4 ECC703 Optical Communication 4 - -- 4 - 4 ECCDLO 703X Department Level Optional Course III 4 - - 4 - 4 ILO701X Institute Level Optional Course I 3 - - 3 - 3 ECL701 Microwave Engineering Lab - 2 - - 1 1 ECL702 Mobile Communication System Lab - 2 - - 1 1 ECL703 Optical Communication Lab - 2 - - 1 1 ECLDLO 703X Department Level Optional Lab III - 2 - - 1 1 ECL704 Project-I - 6 - - 3 3 Total 19 14 - 19 7 26 Course Code Course Name Examination Scheme Theory TW Oral & Prac Total Internal Assessment End Sem Exam Exam Duration (Hrs)Test1 Test 2 Avg ECC701 Microwave Engineering 20 20 20 80 03 -- -- 100 ECC702 Mobile Communication System 20 20 20 80 03 -- -- 100 ECC703 Optical Communication 20 20 20 80 03 -- -- 100 ECCDLO 703X Department Level Optional Course III 20 20 20 80 03 -- -- 100 ILO701X Institute Level Optional Course I 20 20 20 80 03 -- -- 100 ECL701 Microwave Engineering Lab -- -- -- -- -- 25 25 50 ECL702 Mobile Communication System Lab -- -- -- -- -- 25 25 50 ECL703 Optical Communication Lab -- -- -- -- -- 25 25 50 ECLDLO 703X Department Level Optional Lab III -- -- -- -- -- 25 25 50 ECL704 Project-I -- -- -- -- -- 50 50 100 Total 100 400 150 150 800
12 Ekeeda – Electronics & Telecommunication Engineering Course Code Department Level Optional Course III Course Code Institute Level Optional Course I# ECCDLO7031 Neural Networks and Fuzzy Logic ILO7011 Product Lifecycle Management ECCDLO7032 Big Data Analytics ILO7012 Reliability Engineering ECCDLO7033 Internet Communication Engineering ILO7013 Management Information System ECCDLO7034 CMOS Mixed Signal VLSI ILO7014 Design of Experiments ECCDLO7034 Embedded System ILO7015 Operation Research ILO7016 Cyber Security and Laws ILO7017 Disaster Management and Mitigation Measures ILO7018 Energy Audit and Management ILO7019 Development Engineering # Common with all branches
University of Mumbai, B. E. (Electronics & Telecommunication Engineering), Rev 2016 12 Ekeeda – Electronics & Telecommunication Engineering Semester VIII Course Code Course Name Teaching Scheme (Contact Hours) Credits Assigned Theory Pracs Tut Theory TW/ Pracs Total ECC801 RF Design 4 - -- 4 -- 4 ECC802 Wireless Networks 4 - - 4 - 4 ECCDLO 804X Department Level Optional Course IV 4 - - 4 - 4 ILO802X Institute Level Optional Course II 3 - - 3 - 3 ECL801 RF Design Lab - 2 - - 1 1 ECL802 Wireless Networks Lab - 2 - - 1 1 ECLDLO 804X Department Level Optional Lab IV - 2 - - 1 1 ECL803 Project-II - 12 - - 6 6 Total 15 18 - 15 9 24 Course Code Course Name Examination Scheme Theory TW Oral & Prac Total Internal Assessment End Sem Exam Exam Duration (Hrs)Test1 Test 2 Avg ECC801 RF Design 20 20 20 80 03 -- -- 100 ECC802 Wireless Networks 20 20 20 80 03 -- -- 100 ECCDLO 804X Department Level Optional Course IV 20 20 20 80 03 -- -- 100 ILO802X Institute Level Optional Course II 20 20 20 80 03 -- -- 100 ECL801 RF Design Lab -- -- -- -- -- 25 25 50 ECL802 Wireless Networks Lab -- -- -- -- -- 25 25 50 ECLDLO 804X Department Level Optional Lab IV -- -- -- -- -- 25 25 50 ECL803 Project-II -- -- -- -- -- 100 50 150 Total 80 320 175 125 700
University of Mumbai, B. E. (Electronics & Telecommunication Engineering), Rev 2016 13 Ekeeda – Electronics & Telecommunication Engineering Course Code Department Level Elective Course IV Course Code Institute Level Elective Course II# ECCDLO8041 Optical Networks ILO8021 Project Management ECCDLO8042 Advanced Digital Signal Processing ILO8022 Finance Management ECCDLO8043 Satellite Communication ILO8023 Entrepreneurship Development and Management ECCDLO8044 Network management in Telecommunication ILO8024 Human Resource Management ILO8025 Professional Ethics and CSR ILO8026 Research Methodology ILO8027 IPR and Patenting ILO8028 Digital Business Management ILO8029 Environmental Management # Common with all branches
14 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC301 Applied Mathematics- III 04 -- @2 04 -- 01 05 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC301 Applied Mathematics- III 20 20 20 80 25 -- -- 125 @ 2 hour to be taken as tutorial classwise Course Pre-requisite: • Applied Mathematics I • Applied Mathematics II Course Objectives: 1. To build the strong foundation in Mathematics of students needed for the field of electronics and Telecommunication Engineering 2. To provide students with mathematics fundamentals necessary to formulate, solve and analyses complex engineering problems. 3. To prepare student to apply reasoning informed by the contextual knowledge to engineering practice. 4. To prepare students to work as part of teams on multi-disciplinary projects. Course Outcome: After successful completion of the course student will be able to  Students will demonstrate basic knowledge of Laplace Transform. Fourier series, Bessel Functions, Vector Algebra and Complex Variable.  Students will demonstrate an ability to identify and Model the problems of the field of Electronics and Telecommunication and solve it.  Students will be able to apply the application of Mathematics in Telecommunication Engineering
15 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Laplace Transform 07 1.1 Laplace Transform (LT) of Standard Functions: Definition of Laplace transform, Condition of Existence of Laplace transform, Laplace transform of eat ,Sin(at),cos(at),sinh(at),cosh(at),tn Heaviside unit step function, Dirac-delta function, Laplace transform of Periodic function 1.2 Properties of Laplace Transform: Linearity, first shifting theorem, second shifting theorem, multiplication by t n , Division by t, Laplace Transform of derivatives and integrals, change of scale, convolution theorem, Evaluation of integrals using Laplace transform. 2 Inverse Laplace Transform & its Applications 06 2.1 Partial fraction method, Method of convolution, Laplace inverse by derivative 2.2 Applications of Laplace Transform: Solution of ordinary differential equations, Solving RLC circuit differential equation of first order and second order with boundary condition using Laplace transform (framing of differential equation is not included) 3 Fourier Series 11 3.1 Introduction: Orthogonal and orthonormal set of functions, Introduction of Dirchlet‟s conditions, Euler‟s formulae. 3.2 Fourier Series of Functions: Exponential, trigonometric functions of any period =2L, even and odd functions, half range sine and cosine series 3.3 Complex form of Fourier series, Fourier integral representation, Fourier Transform and Inverse Fourier transform of constant and exponential function. 4 Vector Algebra & Vector Differentiation 07 4.1 Review of Scalar and Vector Product: Scalar and vector product of three and four vectors, Vector differentiation, Gradient of scalar point function, Divergence and Curl of vector point function 4.2 Properties: Solenoidal and irrotational vector fields, conservative vector field
16 Ekeeda – Electronics & Telecommunication Engineering 5 Vector Integral 06 5.1 Line integral 5.2 Green‟s theorem in a plane, Gauss‟ divergence theorem and Stokes‟ theorem 6 Complex Variable & Bessel Functions 11 6.1 Analytic Function: Necessary and sufficient conditions (No Proof), Cauchy Reiman equation Cartesian form (No Proof) Cauchy Reiman Equation in polar form (with Proof), Milne Thomson Method and it application, Harmonic function, orthogonal trajectories 6.2 Mapping: Conformal mapping, Bilinear transformations, cross ratio, fixed points 6.3 Bessel Functions: Bessel‟s differential equation, Properties of Bessel function of order +1/2 and -1/2, Generating function, expression of cos(xsin), sin (x sin) in term of Bessel functions Note: Term Work should be based on Tutorials. Textbooks : 1. H.K. Das, “Advanced engineering mathematics”, S . Chand, 2008 2. A. Datta, “Mathematical Methods in Science and Engineering”, 2012 3. B.S. Grewal, “Higher Engineering Mathematics”, Khanna Publication Reference Books: 1. B. V. Ramana, “Higher Engineering Mathematics”, Tata Mc-Graw Hill Publication 2. Wylie and Barret, “Advanced Engineering Mathematics”, Tata Mc-Graw Hill 6th Edition 3. Erwin Kreysizg, “Advanced Engineering Mathematics”, John Wiley & Sons, Inc 4. Murry R. Spieget, “Vector Analysis”, Schaum‟s outline series, Mc-Graw Hill Publication
17 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC302 Electronic Devices & Circuits-I 04 -- -- 04 -- -- 04 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC302 Electronic Devices & Circuits-I 20 20 20 80 -- -- -- 100 Course Pre-requisite: • Basic Electrical Engineering • Applied Physics Course Objectives: 1. To understand operation of semiconductor devices. 2. To understand DC analysis and AC models of semiconductor devices. 3. To apply concepts for the design of Regulators and Amplifiers 4. To verify the theoretical concepts through laboratory and simulation experiments. 5. To implement mini projects based on concept of electronics circuit concepts. Course Outcome: After successful completion of the course student will be able to 1. Understand the current voltage characteristics of semiconductor devices, 2. Analyze dc circuits and relate ac models of semiconductor devices with their physical Operation, 3. Design and analyze of electronic circuits, 4. Evaluate frequency response to understand behaviour of Electronics circuits.
18 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Diode and material science 06 1.1 Study of various types of resistor, capacitor and inductors 1.2 Basic fabrication steps of passive elements. 1.3 PN junction Diode characteristics, small signal model 2 Rectifier, Filters and Regulator 08 2.1 Analysis and design of rectifier circuit with Filters (L, LC, C,CLC,CRC) 2.2 Concept of load and line regulation in power supply circuits. 2.3 Analysis and design of zener voltage regulator 3 Transistor biasing and design 08 3.1 Operation of BJT, FET (N-CHANNEL, P-CHANNEL) with characteristics and equation. 3.2 Bipolar Junction Transistor: BJT characteristics, DC/AC load line, DC analysis and design of fixed bias, collector to base bias and voltage divider bias, stability factor analysis 3.3 Junction Field Effect Transistor: Analysis and design of self- bias and voltage divider bias, zero temp drift biasing. 4 Transistor modeling and Small signal analysis of amplifier 12 4.1 Hybrid and representation. hybrid-pi model of BJT with graphical 4.2 Small signal model of FET with graphical representation. 4.3 Small signal analysis (Zi, Zo, Av and Ai) of CE, CB, and CC configurations using hybrid-pi model of BJT 4.4 small signal (mid-frequency) analysis of CS, CD and CG amplifiers using FET 5 High frequency response of BJT and FET amplifiers 08 5.1 High frequency hybrid-pi equivalent Circuits of BJT and FET, Miller effect and Miller capacitance, gain bandwidth product 5.2 Effects of capacitors on frequency response of single stage amplifier using BJT and FET 5.3 Analysis of single stage amplifiers at HF and gain bandwidth product.
19 Ekeeda – Electronics & Telecommunication Engineering 6 Design of small signal amplifiers 06 6.1 Design of single stage RC Coupled CE amplifier. 6.2 Design of single stage RC Coupled CS amplifier. (USE of parameters from data sheet compulsory) Textbooks : 1. D. A. Neamen, “Electronic Circuit Analysis and Design,” Tata McGraw Hill, 2nd Edition. 2. A. S. Sedra, K. C. Smith, and A. N. Chandorkar, “Microelectronic Circuits Theory and Applications,” International Version, OXFORD International Students, 6th Edition 3. R. S. Dudhe and M. Farhan, “Electronic Devices and Circuits,” Synergy Knowledgeware, 1st Edition, 2013. Reference Books: 1. Boylestad and Nashelesky, “Electronic Devices and Circuits Theory,” Pearson Education, 11th Edition. 2. A. K. Maini , “Electronic Devices and Circuits,” Wiley. 3. T. L. Floyd, “Electronic Devices,”Prentice Hall, 9th Edition, 2012. 4. A. Rockett, “Material Science of Semiconductors,”, Springer, 1st Edition, 2009 5. A. Mottershead, “Electronic Devices and Circuits; An Introduction,”
20 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC303 Digital System Design 04 -- -- 04 -- -- 04 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC303 Digital System Design 20 20 20 80 -- -- -- 100 Course Objectives: 1. To understand number representation and conversion between different representation in digital electronic circuits. 2. To analyze logic processes and implement logical operations using combinational logic circuits. 3. To understand characteristics of memory and their classification. 4. To understand concepts of sequential circuits and to analyze sequential systems in terms of state machines. 5. To understand concept of Programmable Devices, PLA, PAL, CPLD and FPGA and implement digital system using VHDL. 6. To implement combinational and sequential circuits using VHDL. Course Outcome: After successful completion of the course student will be able to 1. Develop a digital logic and apply it to solve real life problems. 2. Analyze, design and implement combinational logic circuits. 3. Classify different semiconductor memories. 4. Analyze, design and implement sequential logic circuits. 5. Analyze digital system design using PLD. 6. Simulate and implement combinational and sequential circuits using VHDL systems.
21 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Number Systems and Codes 04 1.1 Review of Number System, Binary Code, Binary Coded Decimal, Octal Code, Hexadecimal Code and their conversions, Binary Arithmetics, Gray Code 2 Logic Gates and Combinational Logic Circuits 18 2.1 Analog and Digital signals and systems, Logic levels, TTL and CMOS Logic families and their characteristics 2.2 Digital logic gates, Realization using NAND, NOR gates, Boolean Algebra, De Morgan‟s Theorem, SOP and POS representation, K Map up to four variables and Quine- McClusky method 2.3 Arithmetic Circuits: Half adder, Full adder, Half Subtractor, Full Subtractor, Serial and Parallel Addition, Carry Look ahead adder and BCD adder. Binary Multiplier, Magnitude Comparator, 2.4 Multiplexer and De-multiplexer: Multiplexer operations, cascading of Multiplexer, Boolean Function implementation using multiplexer and basic gates, de-multiplexer, encoder and decoder 3 Different Types of Memory 02 Classification and Characteristics of memory, SRAM, DRAM, ROM, PROM, EPROM and Flash memories 4 Sequential Logic Circuits: 12 4.1 Flip flops: RS, JK, Master slave flip flops; T & D flip flops with various triggering methods, Conversion of flip flops, Registers: SISO, SIPO, PISO, PIPO, Universal shift registers. 4.2 Counters: Asynchronous and Synchronous, Up/Down, MOD N, BCD 4.3 Applications of Sequential Circuits: Frequency division, Ring Counter, Johnson Counter. models, State transition diagram, Design of Moore and Mealy circuits-Design of Serial Adder and vending Machine 4.4 State Reduction Techniques: Row elimination and Implication table methods 5 Programmable Logic Devices: 09 Introduction : Programmable Logic Devices (PLD),
22 Ekeeda – Electronics & Telecommunication Engineering Programmable Logic Array (PLA), Programmable Array Logic(PAL), CPLD and FPGA, Keyboard Encoder system design using PLD 6 VHSIC Hardware Description Language (VHDL) 03 6.1 Data types, Structural modeling using VHDL, Attributes, Data Flow behavioral, Implementation of Priority Encoder- combinational circuit and Fibonacci Series Generator- sequential circuits using VHDL Textbooks : 1. John F. Warkerly, “Digital Design Principles and Practices”, Pearson Education, Fourth Edition (2008). 2. R. P. Jain, “Modern Digital Electronics”, Tata McGraw Hill Education, Third Edition (2003). 3. J. Bhaskar, “VHDL Primer”, PHI, Third Edition (2009). 4. Volnei A. Pedroni, “Digital Electronics and Design with VHDL” Morgan Kaufmann Publisher (2008) Reference Books: 1. Morris Mano / Michael D. Ciletti, “Digital Design”, Pearson Education, Fourth Edition (2008). 2. Thomas L. Floyd, “Digital Fundamentals”, Pearson Prentice Hall, Eleventh Global Edition (2015). 3. Mandal, “Digital Electronics Principles and Applications”, McGraw Hill Education, First Edition (2010). 4. Stephen Brown & Zvonko Vranesic, “Fundamentals of Digital Logic Design with VHDL”, Second Edition, TMH (2009). 5. Ronald J. Tocci, Neal S. Widmer, “Digital Systems Principles and Applications”, Eighth Edition, PHI (2003) 6. Donald P. Leach / Albert Paul Malvino/Gautam Saha, “Digital Principles and Applications”, The McGraw Hill, Seventh Edition (2011).
23 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC304 Circuit Theory and Networks 04 -- @2 04 -- 1 05 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC304 Circuit Theory and Networks 20 20 20 80 25 -- -- 125 @ 2 hour to be taken as tutorial classwise Course Pre-requisite: • Basic Electrical Engineering • Solution to Differential Educations and Laplace Transform Course Objectives: 1. To analyze the Circuits in time and frequency domain 2. To study network Topology, network Functions, two port network 3. To synthesize passive network by various methods Course Outcome: After successful completion of the course student will be able to 1. Apply their knowledge in analysing Circuits by using network theorems. 2. Apply the time and frequency method of analysis. 3. Find the various parameters of two port network. 4. Apply network topology for analyzing the circuit 5. Synthesize the network using passive elements.
24 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Electrical circuit analysis 08 1.1 Analysis of DC & AC Circuits: Analysis of Circuits with and without controlled sources using generalized loop and node matrix methods Circuit Theorems: Superposition, Thevenin‟s, Norton‟s,maximum power transfer and reciprocity theorems 1.2 Magnetic circuits: Concept of Self and mutual inductances, coefficient of coupling, dot convention, equivalent circuit Coupled circuit- solution using mesh analysis 2 Graph Theory 08 2.1 Objectives of graph theory, Linear Oriented Graphs, graph terminologies Matrix representation of a graph: Incidence matrix, Circuit matrix, Cut-set matrix, reduced incident matrix, tieset matrix, f-cutset matrix. 2.2 Relationship between sub matrices A, B & Q. 2.3 KVL & KCL using matrix 3 Time and frequency domain analysis 08 3.1 Time domain analysis of R-L and R-C Circuits: Forced and natural response, initial and final values Solution using first order differential equation for impulse, step, ramp, exponential & sinusoidal signals 3.2 Time domain analysis of R-L-C Circuits: Forced and natural response, effect of damping factor. Solution using second order equation for step, ramp, exponential & sinusoidal signals. 3.3 Frequency domain analysis: Frequency - domain representation of R, L,C , initial value theorem & final value theorem, applications of Laplace Transform in analyzing electrical circuits 4 Network functions 08 4.1 Network functions for the one port and two port networks, Driving point and transfer functions, Poles and Zeros of Network functions, necessary condition for driving point functions, necessary condition for transfer functions, calculation of residues by analytical and graphical methods,
25 Ekeeda – Electronics & Telecommunication Engineering Time domain behavior as related to the Pole-Zero plot Stability & causality, testing for Hurwitz polynomial 4.2 Analysis of ladder & symmetrical lattice network 5 Two port Networks 08 5.1 Parameters: Open Circuits, short Circuit, Transmission and Hybrid parameters, relationship among parameters, conditions for reciprocity and symmetry 5.2 Interconnections of Two-Port networks T & π representation. 5.3 Terminated two-port networks 6 Synthesis of RLC circuits 08 6.1 Positive Real Functions: Concept of positive real function , testing for necessary and sufficient conditions for Positive real Functions 6.2 Synthesis of LC, RC & RL Circuits: properties of LC, RC & RL driving point functions, LC, RC & RL network Synthesis in Cauer-I & Cauer-II , Foster-I & Foster-II forms Note: Term Work should be based on Tutorials. Textbooks :  Franklin F Kuo, “Network Analysis and Synthesis”, Wiley Toppan, 2nd.ed. 1966  M E Van Valkenburg, “Network Analysis”, Prentice-Hall of India Pvt Ltd, New Delhi, 26th Indian Reprint, 2000 Reference Books: 1. A Chakrabarti, “Circuit Theory”, Dhanpat Rai & Co., Delhi, 6h Edition 2. A. Sudhakar, Shyammohan S. Palli “circuits and Networks, Tata McGraw-Hill education 3. Smarajit Ghosh, Network Theory Snallysis & Syntshesis, PHI learning 4. K.S. Suresh Kumar, Elecric circuit analysis, Pearson (2013) 5. D Roy Choudhury, Networks and Systems, New Age International 1998. TUTORIALS: At least 10 tutorials covering various topics of the syllabus.
26 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC305 Electronic Instrumentation & Control 04 -- @2 04 -- 1 05 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC305 Electronic Instrumentation & Control 20 20 20 80 25 -- -- 125 @ 2 hour to be taken as tutorial classwise Course Pre-requisite: • Basic Electrical Engineering Course Objectives:  To provide basic knowledge about the various sensors and data acquisition systems applied in Wireless sensor network.  To provide fundamental concepts of control system such as mathematical modeling, time response and frequency response.  To develop concepts of stability and its assessment criteria. Course Outcome: After successful completion of the course student will be able to  Students will be able to explain principle of operation for various sensors.  Students will be able to describe functional blocks of data acquisition system.  Students will be able to find transfer functions for given system.  Students will be able to calculate time domain and frequency domain parameter for given system  Students will be able to predict stability of given system using appropriate criteria.
27 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Principle of Measurement, Testing and Measuring instruments 07 1.1 Introduction to Basic instruments: Components of generalized measurement system Concept of accuracy, precision, linearity, sensitivity, resolution, hysteresis, calibration. 1.2 Measurement of Resistance: Kelvin‟s double bridge, Wheatstone bridge and Mega ohm bridge Measurement of Inductance: Maxwell bridge and Hey bridge Measurement of Capacitance: Schering bridge Q-Meter: Operating principle and applications Energy and power meters: Working of energy and power meter 2 Sensors and Transducers 08 2.1 Basics of sensors and Transducers-Active and passive transducers, characteristics and selection criteria of transducers, working principle of Eddy-current sensors, Pizoelectric transducers, photoelectric and photovoltaic sensors, capacitive sensors 2.2 Displacement and pressure- Potentiometers, pressure gauges, linear Variable differential transformers(LVDT) for measurement of pressure and displacement strain gauges 2.3 Temperature Transducers- Resistance temperature detectors(RTD). Thermistors and thermocouples , their ranges and applications 3 Telemetry and Data Acquisition System 08 3.1 Introduction and characteristics, Landline Telemetry, Radio Telemetry Types of Multiplexing Systems, 3.2 Data Acquisition: Components of Analog and Digital Data Acquisition System, 3.3 Uses of Data Acquisition System, Use of recorders in Digital systems, Modern Digital Data Acquisition System. 4 Introduction to control system Analysis 07
28 Ekeeda – Electronics & Telecommunication Engineering 4.1 Introduction: Open and closed loop systems, example of control systems 4.2 Modelling: Modelling, Transfer function model of electrical systems, Block diagram reduction techniques and Signal flow graph 4.3 Dynamic Response: Standard test signals, transient and steady state behaviour of first and second order systems , steady state errors in feedback control systems and their types 5 Stability Analysis in Time Domain 08 5.1 Concept of stability: Routh and Hurwitz stability criterion 5.2 Root locus Analysis: Root locus concept, general rules for constructing root-locus ,root locus analysis of control system, concept of design of lag and lead compensator 6 Stability Analysis in frequency domain 10 6.1 Introduction: Frequency domain specification, Relationship between time and frequency domain specification of system,stability margins 6.2 Bode Plot: Magnitude and phase plot, Method of plotting Bode plot,Stability margins and analysis using bode plot. Frequency response analysis of RC,RL,RLC circuits 6.3 Nyquist Criterion: Concept of Polar plot and Nyquist plot, Nyquist stability criterion ,gain and phase margin Note: Term Work should be based on Tutorials. Textbooks : 1. A.K. Sawhney, “Electrical & Electronic Measurement & Instrumentation” – DRS . India 2. M.M.S. Anand, “Electronic Instruments and instrumentation Technology”. 3. H.S.Kalsi, “Electronic Instrumentation”-TMH, 2nd Edition. 4. Nagrath, M.Gopal, “Control System Engineering”, Tata McGraw Hill. 5. K.Ogata, “Modern Control Engineering, Pearson Education”, IIIrd edition. Reference Books: 1. Helfrick&Copper, “Modern Electronic Instrumentation & Measuring Techniques” – PHI 2. W.D. Cooper, “Electronic Instrumentation And Measuring Techniques” – PHI 3. Benjamin C.Kuo, “Automatic Control Systems, Eearson education”, VIIth edition
29 Ekeeda – Electronics & Telecommunication Engineering 4. Rangan C. S., Sarma G. R. and Mani V. S. V., "Instrumentation Devices And Systems", Tata McGraw-Hill, 2nd Ed., 2004. 5. Bell David A."Electronic Instrumentation and Measurements", PHI Pearson Education, 2006. 6. Madan Gopal, “Control Systems Principles and Design”, Tata McGraw hill, 7th edition,1997. 7. Normon, “Control System Engineering”, John Wiley & sons, 3rd edition.
30 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory TW/Pracs Tutorial Total ECL301 Electronic Devices & Circuits-I Laboratory -- 02 -- -- 1 -- 1 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECL301 Electronic Devices & Circuits-I Laboratory -- -- -- -- 25 25 -- 50 Laboratory plan Maximum of 8 practicals including minimum 2 simulations should be conducted based on following topics Study of different measuring instruments such as CRO, Function Generator, Multimeter, and Power Supply. (Compulsory) Filter circuits Biasing of BJT and FET Frequency response Zener regulator Single stage amplifiers Minimum One project based on: Design of single stage CE and CS amplifier Design of filter and regulator circuits Design of power supply Any other relevant topic based on syllabus Note : Small project should be considered as a part of term-work. Term Work: At least 08 Experiments including 02 simulations covering entire syllabus must be given during the “Laboratory session batch wise”. Computation/simulation based experiments are also encouraged. The experiments should be students centric and attempt should be made to make experiments more meaningful, interesting and innovative. Application oriented one mini-project can be conducted for maximum batch of four students.
31 Ekeeda – Electronics & Telecommunication Engineering Term work assessment must be based on the overall performance of the student with every experiments/tutorials and mini-projects are graded from time to time. The grades will be converted to marks as per “Choice Based Credit and Grading System” manual and should be added and averaged. Based on above scheme grading and term work assessment should be done. The practical and oral examination will be based on entire syllabus.
32 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory TW/Pracs Tutorial Total ECL302 Digital System Design Laboratory -- 02 -- -- 1 -- 1 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECL302 Digital System Design Laboratory -- -- -- -- 25 25 -- 50 Laboratory plan Maximum of 8 practicals including minimum 2 simulations should be conducted. Suggested list of experiments: 1. Verify different logic gates. 2. Simplification of Boolean functions. 3. Verify Universal gates NAND and NOR and design EXOR and EXNOR gates using Universal gates. 4. Implement Half adder, Full adder, Half subtractor and Full subtractor circuits. 5. Implement BCD adder using four bit binary adder IC-7483. 6. Flip flops conversion JK to D, JK to T and D to TFF. 7. Implement logic equations using Multiplexer. 8. Design synchronous MOD N counter using IC-7490. 9. Verify encoder and decoder operations. 10. Implement digital circuits to perform binary to gray and gray to binary operations. 11.Verify truth table of different types of flip flops. 12. Verify different counter operations. 13. Write VHDL simulation code for different logic gates. 14. Write VHDL simulation code for combinational and sequential circuits 15. Write VHDL simulation code for 4:1 Multiplexer, 2 line to 4 line binary decoder
33 Ekeeda – Electronics & Telecommunication Engineering Minimum One project Suggested list of Mini Projects: 1. Design Clock pulse generator. 2. Design Clap operated remote control for Fan. 3. Design BCD counter and show operation on Seven Segment Display. 4. Design digital stop watch. 5. Write VHDL code to implement traffic light controller. 6. Design water level indicator for overhead water tank. 7. Design frequency divider circuit. 8. Design switch debounce circuit. 9. Design sequence generator circuit. 10. Design sequence detector circuit. 11. Design Even/Odd parity generator/checker circuit. 12. Design simple LED flasher circuit. 13. Design digital dice. 14. Design fastest finger first indicator. 15. Design Toggle switch using TFF. Note : Small project should be considered as a part of term-work. Term Work: At least 08 Experiments including 02 simulations covering entire syllabus must be given during the “Laboratory session batch wise”. Computation/simulation based experiments are also encouraged. The experiments should be students centric and attempt should be made to make experiments more meaningful, interesting and innovative. Application oriented one mini-project can be conducted for maximum batch of four students. Term work assessment must be based on the overall performance of the student with every experiments/tutorials and mini-projects are graded from time to time. The grades will be converted to marks as per “Choice Based Credit and Grading System” manual and should be added and averaged. Based on above scheme grading and term work assessment should be done. The practical and oral examination will be based on entire syllabus.
34 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory TW/Pracs Tutorial Total ECL303 OOP using JAVA laboratory -- 02 -- -- 1 -- 1 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECL303 OOP using JAVA laboratory -- -- -- -- 25 25 -- 50 Course Pre-requisites: • Fundamentals of C-Programming • Control Structures • Arrays and String Course Objectives: 1. To understand Object Oriented Programming and its principles. 2. To describe & explain keywords and Data types. 3. Able to implement Methods, Constructors, Arrays, Multithreding and Applet 4. To help students to understand how to use a programming language to resolve problems. Course Outcomes:  Students will be able to code a program using JAVA constructs.  Students will be able to understand fundamental features of an object oriented language: object classes and interfaces, exceptions and libraries of object collections.  Students will be able to develop a program that efficiently implements the algorithm for given tasks.  Students will be able to utilize the knowledge acquired in this course to develop higher level algorithms.
35 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Fundamental Concepts of Object Oriented Programming 06 1.1 Introduction to Object-Oriented Programming 1.2 Classes, Objects, Creating Classes and Objects, Principles of OOP: Abstraction, Encapsulation, Inheritance, Polymorphism 1.3 Differences And Similarity Between C and Java 2 Fundamental Of Java Programming 08 2.1 Features of Java, JDK Environment & Tools, Structure of Java Program 2.2 Java Keywords, Super Keyword, Final Keyword, Abstract Class 2.3 Data Types, Variables, Operators,Expressions 2.4 Input Output Using Scanner Class 2.5 Exception Handling, Object-Oriented Containers 3 Method, Constructors, Destructors And Arrays 04 3.1 Passing and Returning Parameters to Methods 3.2 Constructor and Types, Destructor 3.3 Arrays and Types: Create, One Dimensional Arrays, Two Dimensional Array, Multidimensional Array, String Array 4 Inheritance, Interface And Package 04 4.1 Types of Inheritance: Single, Multilevel, Hierarchical 4.2 Method Overloading and Method Overriding 4.3 Interface 4.4 Packages 5 Multithreading And Applet 04 5.1 Life Cycle Of Thread 5.2 Priority In Multithreading 5.3 Applet Life Cycle 5.4 Creating Applet, Applet Tag
36 Ekeeda – Electronics & Telecommunication Engineering Textbooks : 1. Herbert Schidt, “The Complete Reference”, Tata McGraw-Hill Publishing Company Limited, Ninth Edition 2. D.T. Editorial Services ,“Java 8 Programming Black Book”, Dreamtech Press, Edition: 2015 3. Yashwant Kanitkar,”Let Us Java”, BPB Publications; 2nd Edition edition. Reference Books: 1. Java: How to Program, 8/e, Dietal, Dietal, PHI 2. Grady Booch, James Rumbaugh, Ivar Jacobson, “The Unified Modeling Languageser Guide”, Pearson Education 3. Sachin Malhotra, Saurabh Chaudhary “Programming in Java”, Oxford University Press, 2010 Software Tools: 1. Raptor-Flowchart Simulation:http://raptor.martincarlisle.com/ 2. Eclipse: https://eclipse.org/ 3. Netbeans:https://netbeans.org/downloads/ 4. CodeBlock:http://www.codeblocks.org/ 5. J-Edit/J-Editor/Blue J Online Repository: 1. Google Drive 2. GitHub 3. Code Guru
37 Ekeeda – Electronics & Telecommunication Engineering Laboratory plan Maximum of 8 practicals including minimum 2 simulations should be conducted based on following topics Section Experiment Name Module 1. Write a program using command line argument in java. • Echoing Command-Line Arguments. • Parsing Numeric Command-Line arguments. Module 1 2. Study of simple java programs • WAP to calculate area & circumference of circle • WAP to swap given two strings • WAP to separate out digits of a number • WAP to convert temperature from Fahrenheit to Celsius • WAP to find a square , squarroot, and Cube of a given no. using abstraction Module 1 3. Study of different operators in java • WAP to compare two numbers. • WAP to print truth table for java logical operators • WAP to read the number & shift left & right by 3 bits. Module 1 4. Write a program for various ways of accepting data through keyboard & display its content. • Read through DataInputstream. • Read input through Scanner. • Read input through BufferedReader. Module 2 5. Study of Arrays Write a program for addition, subtraction and multiplication of two matrices. Module 3 6. Study of Objects and Classes • Define a class to represent a bank account. Include the following members: Data: name of the depositor account number Module 3
38 Ekeeda – Electronics & Telecommunication Engineering type of account balance amount in the account Methods: 1.to assign initial values 2.to deposit an amount 3.to withdraw an amount after checking balance. 4.to display the name & balance • WAP using this keyword 7. Study of Strings. Accept the two strings from user & do the following operations • convert to lowercase • convert to uppercase • Replace all appearance of one character by another • Compare two strings • Derive the substring of a string • Derive the position of a character in a string • Calculate the length of a string • Derive the nth character of a string Module 2 8. WAP to implement following constructors • Default constructor • Parameterized constructor Module 3 9. Study of Interface. Create an interface Area & implement the same in different classes Rectangle ,circle ,triangle. Module 4 10. Study of utility package • WAP to generate a year using random class and check whether it is leap or not. • Write a program to display current date. Also display Time in hours & Module 4
39 Ekeeda – Electronics & Telecommunication Engineering Staff Minutes using Date class. 11. Study of Inheritance Typist Teacher Officer subject Regular Casual name dailywedges Module 4 12. Study of Exception Handling in java. Write a program to use throw finally and try catch to handle exception. Module 2 Staff code
40 Ekeeda – Electronics & Telecommunication Engineering 13. Study of Multithreading. WAP to illustrate function yield(), isAlive(), sleep(), join(). Create three threads as P,Q,R. Thread P has maximum priority, thread Q has minimum priority, thread R has normal priority. Module 5 14. Study graphics using applet. WAP to draw all geometric shapes and fill them with different colors. Module 5 Minimum One project Suggested list of mini projects 1. Inventory Control System 2. Develop Calculator 3. Develop Editor ( Example: Notepad) 4. Devlop Multimedia App to teach primary students (Sahpes, Colors, etc.) 5. Create an audio or video applet or swing based application with play, pause and stop options. Note : Small project should be considered as a part of term-work. Term Work: At least 10 experiments covering entire syllabus should be set to have well predefined inference and conclusion. The experiments should be students centric and attempt should be made to make experiments more meaningful, interesting and innovative. Application oriented one mini-project can be conducted for maximum batch of four students. Term work assessment must be based on the overall performance of the student with every experiments/tutorials and mini-projects are graded from time to time. The grades will be converted to marks as per “Choice Based Credit and Grading System” manual and should be added and averaged. Based on above scheme grading and term work assessment should be done. The practical and oral examination will be based on entire syllabus. Students are encourages to share their experiments/mini project codes on online repository. Practical from any 10 sections out of 14 sections is compulsory . Practical exam slip should cover all at least 10 sections.
41 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC401 Applied Mathematics- IV 04 -- @2 04 -- 01 05 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC401 Applied Mathematics- IV 20 20 20 80 25 -- -- 125 @2 hour to be taken as tutorial classwise Course Pre-requisite: • Applied Mathematics I • Applied Mathematics II • Applied Mathematics III Course Objectives: 1. To build the strong foundation in Mathematics of students needed for the field of Electronics and Telecommunication Engineering 2. To provide students with mathematics fundamentals necessary to formulate, solve and analyses complex engineering problems. 3. To prepare student to apply reasoning informed by the contextual knowledge to engineering practice. 4. To prepare students to work as part of teams on multi-disciplinary projects Course Outcome: After successful completion of the course student will be able to 1. Demonstrate basic knowledge of Calculus of variation, Vector Spaces, Matrix Theory, Random Variables, Probability Distributions, Correlation and Complex Integration. 2. Demonstrate an ability to identify and Model the problems in the field of Electronics and Telecommunication and solve it. 3. Apply the application of Mathematics in Telecommunication Engineering.
42 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Calculus of Variation: 06 1.1 Euler‟s Langrange equation, solution of Euler‟s Langrange equation (only results for different cases for Function) independent of a variable, independent of another variable, independent of differentiation of a variable and independent of both variables 1.2 Isoperimetric problems, several dependent variables 1.3 Functions involving higher order derivatives: Rayleigh-Ritz method 2 Linear Algebra: Vector Spaces 06 2.1 Vectors in n-dimensional vector space: properties, dot product, cross product, norm and distance properties in n-dimensional vector space. 2.2 Vector spaces over real field, properties of vector spaces over real field, subspaces 2.3 The Cauchy-Schwarz inequality, Orthogonal Subspaces, Gram-Schmidt process 3 Linear Algebra: Matrix Theory 10 3.1 Characteristic equation, Eigen values and Eigen vectors, properties of Eigen values and Eigen vectors. 3.2 Cayley-Hamilton theorem (without proof), examples based on verification of Cayley- Hamilton theorem. 3.3 Similarity of matrices, Diagonalisation of matrices. 3.4 Functions of square matrix, derogatory and non-derogatory matrices. 4 Probability 10 4.1 Baye‟s Theorem (without proof) 4.2 Random variable: Probability distribution for discrete and continuous random variables, Density function and distribution function, expectation, variance. 4.3 Moments, Moment Generating Function.
43 Ekeeda – Electronics & Telecommunication Engineering 4.4 Probability distribution: Binomial distribution, Poisson & normal distribution (For detailed study) 5 Correlation 04 5.1 Karl Pearson‟s coefficient of correlation, Covariance, Spearman‟s Rank correlation, 5.2 Lines of Regression. 6 Complex integration 12 6.1 Complex Integration:Line Integral, Cauchy‟s Integral theorem for simply connected regions, Cauchy‟s Integral formula. 6.2 Taylor‟s and Laurent‟s Series 6.3 Zeros, singularities, poles of f(z), residues, Cauchy‟s Residue theorem. 6.4 Applications of Residue theorem to evaluate real Integrals of different types. Note: Term Work should be based on Tutorials. Textbooks : 1. H.K. Das, “Advanced engineering mathematics”, S . Chand, 2008 2. A. Datta, “Mathematical Methods in Science and Engineering”, 2012 3. B.S. Grewal, “Higher Engineering Mathematics”, Khanna Publication 4. P.N.Wartilar&J.N.Wartikar, “A Text Book of Applied Mathematics” Vol. I & II, Vidyarthi Griha Prakashan, Pune Reference Books: 1. B. V. Ramana, “Higher Engineering Mathematics”, Tata Mc-Graw Hill Publication 2. Wylie and Barret, “Advanced Engineering Mathematics”, Tata Mc-Graw Hill 6th Edition 3. Erwin Kreysizg, “Advanced Engineering Mathematics”, John Wiley & Sons, Inc 4. Seymour Lipschutz “Beginning Linear Algebra” Schaum‟s outline series, Mc-Graw Hill Publication 5. SeymourLipschutz “Probability” Schaum‟s outline series, Mc-Graw Hill Publication
44 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC402 Electronic Devices & Circuits-II 04 -- -- 04 -- -- 04 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC402 Electronic Devices & Circuits-II 20 20 20 80 -- -- -- 100 Course Pre-requisite: • Electronic Devices & Circuits-I Course Objectives:  To understand the operation of the various bias circuits of MOSFET and Analyze and design MOSFET bias circuits.  To understand the operation and design of multistage amplifier for a given specification.  To understand the operation and design of transformer coupled various types of power amplifier circuits.  To understand the effects of negative feedback on amplifier circuits.  To analyze the different RC and LC oscillator circuits to determine the frequency of oscillation. Course Outcome: After successful completion of the course student will be able to 1. Design and analyse the basic operations of MOSFET. 2. Know about the multistage amplifier using BJT and FET in various configuration to determine frequency response and concept of voltage gain. 3. Know about different power amplifier circuits, their design and use in electronics and communication circuits. 4. Know the concept of feedback amplifier and their characteristics. 5. Design the different oscillator circuits for various frequencies
45 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Introduction to MOSFET 08 1.1 MOSFET - Symbol, Types of MOSFET - Depletion and Enhancement type MOSFET (N channel and P channel), 1.2 Construction, Operation, and V-I characteristics of MOSFET 1.3 MOSFET biasing - Types of Depletion & enhancement MOSFET biasing, 1.4 MOSFET as amplifier 2 Introduction of Multistage amplifiers 06 2.1 RC coupled, transformer coupled, direct coupled, 2.2 Low and high frequency considerations of cascade amplifier, cascode amplifier (CE-CB), Darlington pair amplifier. 3 Design of Multistage amplifiers 10 Analysis and design considerations of multistage amplifiers (CE-CE, CS-CS, CS-CE,), effect of source and load resistance 4 Large signal amplifiers 08 4.1 Harmonic distortion and power efficiency of Class A, B, AB, and C amplifiers 4.2 Design of Class A, Class B, and Push-Pull Power amplifier design. 4.3 Thermal considerations and design selection of heat sinks. 5 Feedback amplifiers 08 5.1 Feedback concept, ideal feedback amplifier, classification of feedbacks, Various topologies 5.2 Analysis and design of different types of negative feedback. 6 Oscillators 08 6.1 Principle of oscillation, RC oscillator, twin T oscillator 6.2 Oscillator with LC feedback. Colpitts oscillator, Hartley oscillator, Crystal controlled oscillator. 6.3 Design of different oscillator circuits.
46 Ekeeda – Electronics & Telecommunication Engineering Textbooks :  D. A. Neamen, “Electronic Circuit Analysis and Design,” Tata McGraw Hill, 2nd Edition.  R. L. Boylestad,“Electronic Devices and Circuit Theory,” Pearson, 11th Edition.  T. F. Bogart,“Electronic Devices And Circuit,” Merrill, 6th Edition.  R. S. Dudhe and M. Farhan, “Electronic Devices and Circuits,” Synergy Knowledgeware, 1st Edition Reference Books:  Salivahanan, N. Suresh Kumar,“Electronic Devices and Circuits,” Tata McGraw Hill, 3rd Edition  J. Millman, Christos CHalkias, and Satyabratatajit, Millman‟s,“Electronic Devices and Circuits,” McGrawHill, 3rd Edition  Muhammad H. Rashid, “Microelectronics Circuits Analysis and Design,” Cengage Learning, 2nd Edition.
47 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC403 Linear Integrated Circuits 04 -- -- 04 -- -- 04 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC403 Linear Integrated Circuits 20 20 20 80 -- -- -- 100 Course Pre-requisite: • Basic Electrical Engineering • Electronic Devices & Circuits-I Course Objectives: 1. To understand the concepts, working principles and key applications of linear integrated circuits. 2. To perform analysis of circuits based on linear integrated circuits. 3. To design circuits and systems for particular applications using linear integrated circuits. Course Outcome: After successful completion of the course student will be able to 1. Understand the fundamentals and areas of applications for the integrated circuits. 2. Analyze important types of integrated circuits. 3. Demonstrate the ability to design practical circuits that perform the desired operations. 4. Understand the differences between theoretical, practical & simulated results in integrated circuits. 5. Select the appropriate integrated circuit modules to build a given application.
48 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Introduction to operational amplifiers 08 1.1 Analysis of differential amplifier circuit configurations using FETs, Effect of Swamping resistor, Current sources using FETs, Widlar current source, Wilson current source, Voltage sources and references, DC level shifters. 1.2 Ideal & Practical Operational Amplifiers, Operational amplifier characteristics, Operational amplifier parameters, Operational amplifier open loop and closed loop configurations. 2 Applications of Operational Amplifier 08 2.1 Amplifiers: Inverting, non-inverting, buffer, summing & difference amplifiers, integrator & differentiator (ideal & practical), current amplifier, instrumentation amplifier, log and antilog amplifiers.. 2.2 Converters: Current to voltage converters, voltage to current converters, voltage to frequency converter, frequency to voltage converter. 2.3 Active Filters: Second order active low pass, high pass, band pass and band reject filters, Introduction to switch capacitor filters. 2.4 Sine Wave Oscillators: RC phase shift oscillator, Wien bridge oscillator. 3 Non-Linear Applications of Operational Amplifier 08 3.1 Comparators: Inverting comparator, non-inverting comparator, zero crossing detector, window detector, peak detector, sample & hold circuits. 3.2 Schmitt Triggers: Inverting Schmitt trigger, non-inverting Schmitt trigger. 3.3 Waveform Generators: Square wave generator and triangular wave generator. 3.4 Precision Rectifiers: Half wave and full wave precision rectifiers. 4 Analog to Digital and Digital to Analog Convertors 08 4.1 Performance specifications of ADC, single ramp ADC, ADC using DAC, dual slope ADC, successive approximation ADC. 4.2 Performance specifications of DAC, binary weighted resistor DAC, R/2R ladder DAC, inverted R/2R ladder DAC. 5 Special Purpose Integrated Circuits 08 5.1 Functional block diagram and working of IC 555, design of astable and monostable multivibrator using IC 555, application
49 Ekeeda – Electronics & Telecommunication Engineering of IC 555 as pulse position modulator, pulse width modulator and Schmitt Trigger. 5.2 Functional block diagram and working of VCO IC 566 and application as frequency modulator, Functional block diagram and working of PLL IC 565 and application as FSK Demodulator, Functional block diagram and working of multiplier IC 534andapplication as a phase detector, Functional block diagram and working of waveform generator XR 2206 and application as sinusoidal FSK generator. 6 Voltage Regulators 08 6.1 Functional block diagram, working and design of three terminal fixed (78XX, 79XX series) and three terminal adjustable (LM 317, LM 337) voltage regulators. 6.2 Functional block diagram, working and design of general purpose 723 (LVLC, LVHC, HVLC and HVHC) with current limit and current fold-back protection, Switching regulator topologies, Functional block diagram and working of LT1070 monolithic switching regulator. Textbooks :  Ramakant A. Gayakwad, “Op-Amps and Linear Integrated Circuits”, Pearson Prentice Hall, 4th Edition.  K. R. Botkar, “Integrated Circuits”, Khanna Publishers (2004)  D. Roy Choudhury and S. B. Jain, “Linear Integrated Circuits”, New Age International Publishers, 4th Edition. Reference Books:  Sergio Franco, “Design with operational amplifiers and analog integrated circuits”, Tata McGraw Hill, 3rd Edition.  David A. Bell, “Operation Amplifiers and Linear Integrated Circuits”, Oxford University Press, Indian Edition.  R. F. Coughlin and F. F. Driscoll, “Operation Amplifiers and Linear Integrated Circuits”, Prentice Hall, 6th Edition.  “J. Millman, Christos CHalkias, and Satyabratatajit, Millman‟s,“Electronic Devices and Circuits,” McGrawHill, 3rdEdition”.
50 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC404 Signals and Systems 04 -- 2@ 04 -- 01 05 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC404 Signals and Systems 20 20 20 80 25 -- -- 125 @2 hour to be taken as tutorial classwise Course Pre-requisite: • Applied Maths-III • Circuit Theory and Networks Course Objectives: 1. To introduce students the concept and theory of signals and systems needed in electronics and telecommunication engineering fields. 2. To introduce students to the basic idea of signal and system analysis and its characterization in time and frequency domain Course Outcome: After successful completion of the course student will be able to 1. Understand about various types of signals and systems, classify them, analyze them, and perform various operations on them, 2. Understand use of transforms in analysis of signals and system in continuous and discrete time domain. 3. Observe the effect of various properties and operations of signals and systems. 4. Evaluate the time and frequency response of Continuous and Discrete time systems which are useful to understand the behaviour of electronic circuits and communication systems.
51 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Introduction to signals and systems 08 1.1 Introduction to signals: Definition, sampling theorem, sampling of continuous time signals, elementary signals: exponential, sine, step, impulse, ramp, rectangular, triangular, signum, sinc, operations on signals, 1.2 Classification of signals: Continuous and discrete time, deterministic and non-deterministic, periodic and aperiodic, symmetric (even) and asymmetric (odd), energy and power, causal and anti-causal signal, Case study of different signals from communication and biomedical field 1.3 Introduction to systems: Definition, Classification of systems: Static and dynamic, time variant and time invariant, linear and nonlinear, causal and non-causal, stable and unstable systems., communication and control system as examples 2 Time domain analysis of continuous time and discrete time systems 08 2.1 Representation of systems using differential /difference equation, Impulse, step and exponential response, system stability 2.2 Use of convolution integral and convolution sum for analysis of LTI systems, properties of convolution integral/sum, impulse response of interconnected systems 2.3 Correlation and spectral Density: auto-correlation, cross correlation, analogy between correlation and convolution, energy spectral density, power spectral density, relation of ESD,PSD with auto-correlation 3 Frequency domain analysis of continuous and discrete 10 signals: 3.1 Review of Fourier series: Trigonometric and exponential Fourier series representation of signals, Gibbs phenomenon, Discrete Time Fourier Series, properties, analogy between Continuous Time Fourier Series (CTFS) and Discrete Time Fourier Series (DTFS). 3.2 Fourier Transform (FT): Fourier Transform and Inverse Fourier Transform on periodic and non-periodic signals, limitations of CT/DT Fourier Transform and need for Laplace/Z Transform. 3.3 Overview of Laplace Transform: Need of Laplace Transform, review of unilateral and bilateral Laplace
52 Ekeeda – Electronics & Telecommunication Engineering Transform, properties, inverse of Laplace Transform, concept of Region of Convergence (ROC),poles and zeros, relation between continuous time Fourier Transform and Laplace Transform. 4 Z-Transform 08 4.1 Need of Z-Transform, definition of unilateral and bilateral Z- Transform, Z-Transform of finite and infinite duration sequences, properties, Inverse Z-Transform, relation between discrete time Fourier Transform and Z-Transform, Z- Transform of standard signals, ROC for ZT, plotting poles and zeros of transfer function. 4.2 Analysis of discrete time LTI systems using Z-Transform: Transfer Function, causality and stability of systems, frequency response (impulse and step), relation between Laplace Transform and Z–Transform. 5 State Space Analysis and Realization Structures 08 5.1 State Variable Analysis: Introduction to the notion of „state‟, systematic procedure for determining state equations, solution of state equations using Laplace transform, definition of exp(A) where A is a matrix, time domain solution of state equations. 5.2 Systems with finite duration and infinite duration, impulse response, recursive and non-recursive discrete time system, realization structures: direct form–I, direct form–II, Transpose, cascade, and parallel forms. 6 Applications of Signals and Systems 06 6.1 Signal Processing Applications: Speech and Audio Processing, Multimedia (image & video) processing, Underwater acoustic signal processing, Biological signal analysis 6.2 Communication and Control System Application: Modulation (Analog and Digital) process, Feedback/Feedforward Control system Textbooks : 1. NagoorKani, “Signals and Systems”, Tata McGraw Hill, Third Edition, 2011. 2. B.P. Lathi, “Principles of Linear Systems and Signals”, Oxford, Second Edition, 2010. 3. S. L. Nalbalwar, A. M. Kulkarni and S. P. Sheth, “Signals and Systems”, Synergy Knowledgeware, 2016. 4. Simon Haykin and Barry Van Veen, “Signals and Sytems”, John Wiley and Sons, Second Edition,2004.
53 Ekeeda – Electronics & Telecommunication Engineering Reference Books: 1. Hwei. P Hsu, “Signals and Systems”, Tata McGraw Hill, Third edition, 2010 2. V. Krishnaveni and A.Rajeshwari, “Signals and Systems”, Wiley-India, First Edition 2012. 3. NarayanaIyer, “Signals and Systems”, Cenage Learning, First Edition 2011. 4. Michael J Roberts, “Fundamentals of Signals and systems”, Tata McGraw Hill, special Indian Economy edition, 2009. 5. Rodger E Ziemer, William H. Tranter and D. Ronald Fannin, “Signals and Systems”, Pearson Education, Fourth Edition 2009. 6. Alan V. Oppenhiem, Alan S. Willsky and S. Hamid Nawab, “Signals and Systems”, Prentice-Hall of India, Second Edition, 2002.
54 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC405 Principles of Communication Engineering 04 -- -- 04 -- -- 04 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC405 Principles of Communication Engineering 20 20 20 80 -- -- -- 100 Course Pre-requisite: • Applied Maths III • Electronic Devices and Circuits I Course Objectives: 1. To introduce students to various modulation and demodulation techniques of analog communication. 2. To analyze different parameters of analog communication techniques. 3. To study pulse modulation and demodulation. Course Outcome: After successful completion of the course student will be able to 1. Use different modulation and demodulation techniques used in analog communication 2. Identify and solve basic communication problems 3. Analyze transmitter and receiver circuits 4. Compare and contrast design issues, advantages, disadvantages and limitations of analog communication systems
55 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Basics of Communication System 06 1.1 Block diagram, electromagnetic spectrum, signal bandwidth and power, types of communication channels, Introduction to time and frequency domain. 1.2 Types of noise, signal to noise ratio, noise figure and noise temperature, Friss transmission formula. 2 Amplitude Modulation and Demodulation 12 2.1 Basic concepts, signal representation, need for modulation 2.2 Spectrum, waveforms, modulation index, bandwidth, voltage distribution and power calculations 2.3 DSBFC: Principles, modulating circuits, low level and high level transmitters DSB suppressed carrier :Multiplier modulator, nonlinear modulator and switching modulator 2.4 Amplitude demodulation: Diode detector, practical diode detector, square law detector 2.5 Comparison of different AM techniques, Applications of AM and use of VSB in broadcast television 3 Angle Modulation and Demodulation 12 3.1 Frequency modulation (FM): Basic concept, mathematical analysis, spectrum of FM wave, sensitivity, phase deviation and modulation index, deviation and percent modulated waves, bandwidth requirement of angle modulated waves, deviation ratio, narrowband FM and wideband FM 3.2 Varactor diode modulator, FET reactance modulator, stabilized AFC, Direct FM transmitter, indirect FM Transmitter, noise emphasis and de-emphasis 3.3 Phase modulation (PM): Principle and working of transistor direct PM modulator and relationship and comparison between FM and PM 3.4 FM demodulation: Balance slope detector, Foster-Seely discriminator, ratio detector, FM demodulator using Phase lock loop (PLL), amplitude limiting and thresholding, comparison between FM demodulators, comparison between AM, FM and PM 3.5 Applications of FM and PM
56 Ekeeda – Electronics & Telecommunication Engineering 4 Radio Receivers 06 4.1 TRF, Super - heterodyne receiver, receiver parameters and choice of IF 4.2 AM receiver circuits and analysis, simple AGC, delayed AGC, forward AGC, and communication receiver 4.3 FM receiver circuits, comparison with AM receiver 4.4 Single and independent sideband (SSB and ISB) receivers 5 Analog Pulse Modulation & Demodulation 08 5.1 Sampling theorem for low pass signal, proof with spectrum, Nyquist criteria 5.2 Sampling techniques, aliasing error and aperture effect 5.3 PAM,PWM, PPM generation and detection 5.4 Applications of Pulse Communication 6 Multiplexing & De-multiplexing 04 6.1 Frequency Division Multiplexing transmitter & receiver block diagram 6.2 Time Division Multiplexing transmitter & receiver block diagram 6.3 Examples and applications of FDM and TDM Textbooks : 1. Kennedy and Davis, "Electronics Communication System", Tata McGraw Hill, Fourth edition. 2. B.P. Lathi, Zhi Ding "Modern Digital and Analog Communication system", Oxford University Press, Fourth edition. 3. Wayne Tomasi, "Electronics Communication Systems", Pearson education, Fifth edition. Reference Books: 1. Taub, Schilling and Saha, "Taub's Principles of Communication systems", Tata McGraw Hill, Third edition. 2. P. Sing and S.D. Sapre, "Communication Systems: Analog and Digital”, Tata McGraw Hill, Third edition. 3. Simon Haykin, Michel Moher, "Introduction to Analog and Digital Communication", Wiley, Second edition.
57 Ekeeda – Electronics & Telecommunication Engineering 4. Dennis Roddy and John Coolen, "Electronic Communication", Prentice Hall, Third Edition. 5. Louis Frenzel, “Communication Electronics”, Tata McGraw Hill, Third Edition. 6. Roy Blake, "Electronic Communication Systems", Delmar Publication, Second edition
58 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory TW/Pracs Tutorial Total ECL401 Electronic Devices & Circuits-II Laboratory -- 02 -- -- 1 -- 1 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECL401 Electronic Devices & Circuits-II Laboratory -- -- -- -- 25 25 -- 50 Laboratory plan Minimum 8 practicals including minimum 2 simulations should be conducted. Suggested list of experiments 1. Design and Analyze two stage BJT amplifier (Frequency response and performance parameters) 2. Design and Analyze two stage FET amplifier (Frequency response and performance parameters) 3. Design Multistage BJT amplifier and finding its parameters, Verify. 4. Design and Analyze Voltage series feedback amplifier using BJT/FET and verify its effect on frequency response. x 5. Design and Analyze Current series feedback using BJT/FET and verify its effect on frequency response. 6. Design Multistage JFET amplifier and finding its parameters, verify. 7. Design and Analyze RC Phase shift oscillator for different amplitude and frequency. 8. Design and Analyze Colpitt / Hartley oscillator for different amplitude and frequency. 9. Class C power amplifier and its efficiency Minimum One project based on: 1. Simple Emergency light. 2. DC servo amplifier using MOSFET. 3. Audio tone control circuit. 4. Public address system. 5. Automatic Door Bell
59 Ekeeda – Electronics & Telecommunication Engineering 6. Clapp Switch 7. Topic related to syllabus Note :Small project should be considered as a part of term-work. Term Work: At least 08 Experiments including 02 simulations covering entire syllabus must be given during the “Laboratory session batch wise”. Computation/simulation based experiments are also encouraged. The experiments should be students centric and attempt should be made to make experiments more meaningful, interesting and innovative. Application oriented one mini-project can be conducted for maximum batch of four students. Term work assessment must be based on the overall performance of the student with every experiments/tutorials and mini-projects are graded from time to time. The grades will be converted to marks as per “Choice Based Credit andGrading System” manual and should be added and averaged. Based on above scheme gradingand term work assessment should be done. The practical and oral examination will be based on entire syllabus.
60 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory TW/Pracs Tutorial Total ECL402 Linear Integrated Circuits Laboratory -- 02 -- -- 1 -- 1 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECL402 Linear Integrated Circuits Laboratory -- -- -- -- 25 25 -- 50 Laboratory plan Minimum 8 practicals including minimum 2 simulations should be conducted. Suggested list of experiments  Discrete Differential Amplifier  Inverting, Non inverting, Buffer, Summing & Difference amplifiers  Differentiator & Integrator  Instrumentation amplifier  I to V and V to I converters  V to F and F to V convertors  Active Filters  Wien Bridge Oscillator  RC Phase shift Oscillator  Inverting & Non inverting Schmitt trigger  Square & Triangular wave generator  Precision rectifiers  Peak detector & Sample & Hold Circuits  Analog to Digital converter
61 Ekeeda – Electronics & Telecommunication Engineering  Digital to Analog converter  Multivibrators using IC 555  PPM, PWM and Schmitt trigger using 555  Frequency modulatorusing VCO IC 566.  FSK DemodulatorusingPLL IC 565.  Phase detectorusing multiplier IC 534.  Sinusoidal FSK generator using XR 2206  Voltage Regulators using 78XX/79XX, 317/337, 723 Minimum One project based on: 1. Variable Power Supply 2. Data Acquisition System 3. Function Generator 4. Topic related to syllabus Note :Small project should be considered as a part of term-work. Term Work: At least 08 Experiments including 02 simulations covering entire syllabus must be given during the “Laboratory session batch wise”. Computation/simulation based experiments are also encouraged. The experiments should be students centric and attempt should be made to make experiments more meaningful, interesting and innovative. Application oriented one mini-project can be conducted for maximum batch of four students. Term work assessment must be based on the overall performance of the student with every experiments/tutorials and mini-projects are graded from time to time. The grades will be converted to marks as per “Choice Based Credit andGrading System” manual and should be added and averaged. Based on above scheme gradingand term work assessment should be done. The practical and oral examination will be based on entire syllabus.
62 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory TW/Pracs Tutorial Total ECL403 Principles of Communication Engineering Laboratory -- 02 -- -- 1 -- 1 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECL403 Principles of Communication Engineering Laboratory -- -- -- -- 25 25 -- 50 Laboratory plan Minimum 8 practicals including minimum 2 simulations should be conducted. Suggested list of experiments 1. Generation and detection of AM (DSB-FC, DSB-SC,SSB) signal. 2. Generation and detection of FM signal. 3. Study of AM broadcast receiver (Super heterodyne). 4. Generation of PAM signal and verify the sampling theorem. 5. Generation of PPM, PWM signal. 6. Study of TDM and FDM multiplexing techniques. Suggested list of Minimum projects  AM transmitter/receiver.  FM transmitter/receiver.  PAM,PPM,PWM circuits with IC 555  FM remote encoder/decoder circuits,  Transistor Intercom circuit  Walkie -Talkie Circuit  Arduino based communication circuits
63 Ekeeda – Electronics & Telecommunication Engineering  Electronic voting machine.  Electronic Notice Board Using Android.  Home security system. Note :Small project should be considered as a part of term-work. Term Work: At least 08 Experiments including 02 simulations covering entire syllabus must be given during the “Laboratory session batch wise”. Computation/simulation based experiments are also encouraged. The experiments should be students centric and attempt should be made to make experiments more meaningful, interesting and innovative. Application oriented one mini-project can be conducted for maximum batch of four students. Term work assessment must be based on the overall performance of the student with every experiments/tutorials and mini-projects are graded from time to time. The grades will be converted to marks as per “Choice Based Credit and Grading System” manual and should be added and averaged. Based on above scheme grading and term work assessment should be done. The practical and oral examination will be based on entire syllabus.

More Related Content

PDF
Ekeeda - Biomedical Engineering Syllabus
EkeedaPvtLtd
 
PDF
Mumbai University Syllabus Electronics and telecommunication branch revies 2016
Smt. Indira Gandhi College of Engineering, Navi Mumbai, Mumbai
 
PDF
Infomatica Academy - Engineering Degree - Biomedical Engineering Syllabus
Infomatica Academy
 
PPTX
Top 10 Engineering Colleges in Pune
MITAcademy1
 
PDF
Se be information technology rev 2016
SANJEEVKUMARSRIVASTA7
 
PDF
Best Engineering Colleges in Ghatkesar, Hyderabad, Telangana.
Siddhartha Institute of Technology & Sciences
 
PDF
Feasibility of electromechanical basic work e-module as a new learning media ...
Journal of Education and Learning (EduLearn)
 
PDF
Web based-training-afita2014
Prachyanun Nilsook
 
Ekeeda - Biomedical Engineering Syllabus
EkeedaPvtLtd
 
Mumbai University Syllabus Electronics and telecommunication branch revies 2016
Smt. Indira Gandhi College of Engineering, Navi Mumbai, Mumbai
 
Infomatica Academy - Engineering Degree - Biomedical Engineering Syllabus
Infomatica Academy
 
Top 10 Engineering Colleges in Pune
MITAcademy1
 
Se be information technology rev 2016
SANJEEVKUMARSRIVASTA7
 
Best Engineering Colleges in Ghatkesar, Hyderabad, Telangana.
Siddhartha Institute of Technology & Sciences
 
Feasibility of electromechanical basic work e-module as a new learning media ...
Journal of Education and Learning (EduLearn)
 
Web based-training-afita2014
Prachyanun Nilsook
 

What's hot (19)

PDF
Action Reflected and Project Based Combined Methodology for the Appropriate ...
Journal of Education and Learning (EduLearn)
 
PDF
Computer Science and Engineering Brochure
Harshil Lodhi
 
PPT
Beaumont isd final copy
Prairie View
 
PDF
Asia eBIT @ UCSC: Implementing the paradigm shift from Teaching to Learning t...
Gihan Wikramanayake
 
PPTX
Pimpri chinchwad college of engineering
Engineering College in Pune, Top College in Pune | PCCOE
 
PPTX
Mits college presentation
saravanababu jayabal
 
PDF
Strategies to Improve Engineering Education and Teaching-Learning Pedagogy in...
IRJET Journal
 
PDF
Anempirical study on the performance of self financing engineering colleges (...
prjpublications
 
DOCX
Word - May 1, 2009
butest
 
PDF
NITG-placement brochure 2016-17
Akash Kotha
 
PDF
Exploring the Level of Computer Literacy for Candidates in Higher Education: ...
Dr. Amarjeet Singh
 
PDF
Ict in schools-inspectorateevaluationstudies2008
hannahaifricleggett
 
DOCX
Technology action plans
lesliegvasquez
 
DOCX
Technology action plans
lesliegvasquez
 
PDF
STUDY ON REFORM OF ELECTRONIC TECHNOLOGY EXPERIMENTAL TEACHING UNDER BACKGROU...
ijejournal
 
PDF
IRJET- Teaching Learning Practices for Metrology & Quality Control Subject in...
IRJET Journal
 
PPT
Pune university e maharashtra contest final
radha2013
 
DOCX
Week 4 Action Plan
KimHolbrook
 
DOCX
Technology plan for blog
lesliegvasquez
 
Action Reflected and Project Based Combined Methodology for the Appropriate ...
Journal of Education and Learning (EduLearn)
 
Computer Science and Engineering Brochure
Harshil Lodhi
 
Beaumont isd final copy
Prairie View
 
Asia eBIT @ UCSC: Implementing the paradigm shift from Teaching to Learning t...
Gihan Wikramanayake
 
Pimpri chinchwad college of engineering
Engineering College in Pune, Top College in Pune | PCCOE
 
Mits college presentation
saravanababu jayabal
 
Strategies to Improve Engineering Education and Teaching-Learning Pedagogy in...
IRJET Journal
 
Anempirical study on the performance of self financing engineering colleges (...
prjpublications
 
Word - May 1, 2009
butest
 
NITG-placement brochure 2016-17
Akash Kotha
 
Exploring the Level of Computer Literacy for Candidates in Higher Education: ...
Dr. Amarjeet Singh
 
Ict in schools-inspectorateevaluationstudies2008
hannahaifricleggett
 
Technology action plans
lesliegvasquez
 
Technology action plans
lesliegvasquez
 
STUDY ON REFORM OF ELECTRONIC TECHNOLOGY EXPERIMENTAL TEACHING UNDER BACKGROU...
ijejournal
 
IRJET- Teaching Learning Practices for Metrology & Quality Control Subject in...
IRJET Journal
 
Pune university e maharashtra contest final
radha2013
 
Week 4 Action Plan
KimHolbrook
 
Technology plan for blog
lesliegvasquez
 
Ad

Similar to Ekeeda - Electronics & Telecommunication Syllabus (20)

PDF
R2016 be extc syllabus even
ShailajaUdtewar3
 
PDF
Electronic and Telecommunication Engineering Syllabus - Sem IV Mumbai Univers...
JASPERINEsimon
 
PDF
Electronics communication(4)
Prabhat Raghuvanshi
 
PDF
4.39 te-electronics-engg
Amit Khowala
 
PDF
Syllabus
Rampal Yadav
 
PDF
Prof MSc Program in Electronics
saber ragab
 
PDF
2017 reg ece syllabus
Lecturer
 
PDF
22428 Digital Comubbnication Systems.pdf
nimbalkarvikram966
 
PDF
Ece syllabus 2017 regulation
Gtec Ece
 
PDF
03. B.E. ECE final.pdf
premkumarcdeepak
 
PDF
B.Tech ECE 3rd Year Syllabus_2024-25.pdf
nikhilgupta168690
 
PDF
Ec 2009 scheme syllabus
trrajiv87
 
PDF
VTU-15ecschsyll cbcs
Ece Rljit
 
PPTX
for ece NAAC presentation-HIMABINDU.pptx
nbindu84
 
DOCX
PELicensing Part 1SummaryThe PE exam is a standard requir.docx
karlhennesey
 
DOC
Dc course file
satyaSatyant234
 
PDF
Ece r14 3rd_to8th
siva kumar
 
PDF
Se be information technology rev 2016
SANJEEVKUMARSRIVASTA7
 
PDF
information-technology-engineering-syllabus-sem-v-mumbai-university.pdf
VirajKale9
 
PDF
3rd Year (5th Sem) -Information Technology (1).pdf
Subha322492
 
R2016 be extc syllabus even
ShailajaUdtewar3
 
Electronic and Telecommunication Engineering Syllabus - Sem IV Mumbai Univers...
JASPERINEsimon
 
Electronics communication(4)
Prabhat Raghuvanshi
 
4.39 te-electronics-engg
Amit Khowala
 
Syllabus
Rampal Yadav
 
Prof MSc Program in Electronics
saber ragab
 
2017 reg ece syllabus
Lecturer
 
22428 Digital Comubbnication Systems.pdf
nimbalkarvikram966
 
Ece syllabus 2017 regulation
Gtec Ece
 
03. B.E. ECE final.pdf
premkumarcdeepak
 
B.Tech ECE 3rd Year Syllabus_2024-25.pdf
nikhilgupta168690
 
Ec 2009 scheme syllabus
trrajiv87
 
VTU-15ecschsyll cbcs
Ece Rljit
 
for ece NAAC presentation-HIMABINDU.pptx
nbindu84
 
PELicensing Part 1SummaryThe PE exam is a standard requir.docx
karlhennesey
 
Dc course file
satyaSatyant234
 
Ece r14 3rd_to8th
siva kumar
 
Se be information technology rev 2016
SANJEEVKUMARSRIVASTA7
 
information-technology-engineering-syllabus-sem-v-mumbai-university.pdf
VirajKale9
 
3rd Year (5th Sem) -Information Technology (1).pdf
Subha322492
 
Ad

More from EkeedaPvtLtd (9)

PDF
Ekeeda - First Year Enginering - Basic Electrical Engineering
EkeedaPvtLtd
 
PDF
Ekeeda - Mechatronics Engineering - Introduction to Mechatronics
EkeedaPvtLtd
 
PDF
Ekeeda - Instrumentation Engineering
EkeedaPvtLtd
 
PDF
Ekeeda - Applied Electronics and Instrumentation Engineering
EkeedaPvtLtd
 
PDF
Ekeeda - Mechanical Engineering - Strength of Materials
EkeedaPvtLtd
 
PDF
Production Engineering - Laplace Transformation
EkeedaPvtLtd
 
PDF
Civil engineering - strength of materials
EkeedaPvtLtd
 
PDF
Computer engineering - overview of microprocessors
EkeedaPvtLtd
 
PDF
Lecture notes on microprocessor and microcomputer
EkeedaPvtLtd
 
Ekeeda - First Year Enginering - Basic Electrical Engineering
EkeedaPvtLtd
 
Ekeeda - Mechatronics Engineering - Introduction to Mechatronics
EkeedaPvtLtd
 
Ekeeda - Instrumentation Engineering
EkeedaPvtLtd
 
Ekeeda - Applied Electronics and Instrumentation Engineering
EkeedaPvtLtd
 
Ekeeda - Mechanical Engineering - Strength of Materials
EkeedaPvtLtd
 
Production Engineering - Laplace Transformation
EkeedaPvtLtd
 
Civil engineering - strength of materials
EkeedaPvtLtd
 
Computer engineering - overview of microprocessors
EkeedaPvtLtd
 
Lecture notes on microprocessor and microcomputer
EkeedaPvtLtd
 

Recently uploaded (20)

PPTX
Module2 Data Base Design- ER and NF.pptx
gomathisankariv2
 
PPTX
Tunnel Ventilation System in Kanpur Metro
220105053
 
PDF
67243-Cooling and Heating & Calculation.pdf
DHAKA POLYTECHNIC
 
PDF
STUDY OF NOVEL CHANNEL MATERIALS USING III-V COMPOUNDS WITH VARIOUS GATE DIEL...
ijoejnl
 
PDF
67243-Cooling and Heating & Calculation.pdf
DHAKA POLYTECHNIC
 
PPTX
IoT_Smart_Agriculture_Presentations.pptx
poojakumari696707
 
PDF
Introduction to Ship Engine Room Systems.pdf
Mahmoud Moghtaderi
 
PDF
AI-Driven IoT-Enabled UAV Inspection Framework for Predictive Maintenance and...
ijcncjournal019
 
PDF
settlement FOR FOUNDATION ENGINEERS.pdf
Endalkazene
 
DOCX
SAR - EEEfdfdsdasdsdasdasdasdasdasdasdasda.docx
Kanimozhi676285
 
PPTX
Inventory management chapter in automation and robotics.
atisht0104
 
PDF
Construction of a Thermal Vacuum Chamber for Environment Test of Triple CubeS...
2208441
 
PDF
CAD-CAM U-1 Combined Notes_57761226_2025_04_22_14_40.pdf
shailendrapratap2002
 
PDF
top-5-use-cases-for-splunk-security-analytics.pdf
yaghutialireza
 
PPTX
Online Cab Booking and Management System.pptx
diptipaneri80
 
PDF
All chapters of Strength of materials.ppt
girmabiniyam1234
 
PDF
2025 Laurence Sigler - Advancing Decision Support. Content Management Ecommer...
Francisco Javier Mora Serrano
 
PDF
LEAP-1B presedntation xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
hatem173148
 
PPTX
FUNDAMENTALS OF ELECTRIC VEHICLES UNIT-1
MikkiliSuresh
 
PDF
Advanced LangChain & RAG: Building a Financial AI Assistant with Real-Time Data
Soufiane Sejjari
 
Module2 Data Base Design- ER and NF.pptx
gomathisankariv2
 
Tunnel Ventilation System in Kanpur Metro
220105053
 
67243-Cooling and Heating & Calculation.pdf
DHAKA POLYTECHNIC
 
STUDY OF NOVEL CHANNEL MATERIALS USING III-V COMPOUNDS WITH VARIOUS GATE DIEL...
ijoejnl
 
67243-Cooling and Heating & Calculation.pdf
DHAKA POLYTECHNIC
 
IoT_Smart_Agriculture_Presentations.pptx
poojakumari696707
 
Introduction to Ship Engine Room Systems.pdf
Mahmoud Moghtaderi
 
AI-Driven IoT-Enabled UAV Inspection Framework for Predictive Maintenance and...
ijcncjournal019
 
settlement FOR FOUNDATION ENGINEERS.pdf
Endalkazene
 
SAR - EEEfdfdsdasdsdasdasdasdasdasdasdasda.docx
Kanimozhi676285
 
Inventory management chapter in automation and robotics.
atisht0104
 
Construction of a Thermal Vacuum Chamber for Environment Test of Triple CubeS...
2208441
 
CAD-CAM U-1 Combined Notes_57761226_2025_04_22_14_40.pdf
shailendrapratap2002
 
top-5-use-cases-for-splunk-security-analytics.pdf
yaghutialireza
 
Online Cab Booking and Management System.pptx
diptipaneri80
 
All chapters of Strength of materials.ppt
girmabiniyam1234
 
2025 Laurence Sigler - Advancing Decision Support. Content Management Ecommer...
Francisco Javier Mora Serrano
 
LEAP-1B presedntation xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
hatem173148
 
FUNDAMENTALS OF ELECTRIC VEHICLES UNIT-1
MikkiliSuresh
 
Advanced LangChain & RAG: Building a Financial AI Assistant with Real-Time Data
Soufiane Sejjari
 

Ekeeda - Electronics & Telecommunication Syllabus

  • 1. Ekeeda – Electronics & Telecommunication Engineering AC-11.05.2017 Item No. 4.307 UNIVERSITY OF MUMBAI Revised syllabus (Rev- 2016) from Academic Year 2016 -17 Under FACULTY OF TECHNOLOGY Electronics and Telecommunication Engineering Second Year with Effect from AY 2017-18 Third Year with Effect from AY 2018-19 Final Year with Effect from AY 2019-20 As per Choice Based Credit and Grading System with effect from the AY 2016–17
  • 2. 2 Ekeeda – Electronics & Telecommunication Engineering Co-ordinator, Faculty of Technology’s Preamble: To meet the challenge of ensuring excellence in engineering education, the issue of quality needs to be addressed, debated and taken forward in a systematic manner. Accreditation is the principal means of quality assurance in higher education. The major emphasis of accreditation process is to measure the outcomes of the program that is being accredited. In line with this Faculty of Technology of University of Mumbai has taken a lead in incorporating philosophy of outcome based education in the process of curriculum development. Faculty of Technology, University of Mumbai, in one of its meeting unanimously resolved that, each Board of Studies shall prepare some Program Educational Objectives (PEO‟s) and give freedom to affiliated Institutes to add few (PEO‟s). It is also resolved that course objectives and course outcomes are to be clearly defined for each course, so that all faculty members in affiliated institutes understand the depth and approach of course to be taught, which will enhance learner‟s learning process. It was also resolved that, maximum senior faculty from colleges and experts from industry to be involved while revising the curriculum. I am happy to state that, each Board of studies has adhered to the resolutions passed by Faculty of Technology, and developed curriculum accordingly. In addition to outcome based education, semester based credit and grading system is also introduced to ensure quality of engineering education. Choice based Credit and Grading system enables a much-required shift in focus from teacher-centric to learner-centric education since the workload estimated is based on the investment of time in learning and not in teaching. It also focuses on continuous evaluation which will enhance the quality of education. University of Mumbai has taken a lead in implementing the system through its affiliated Institutes and Faculty of Technology has devised a transparent credit assignment policy and adopted ten points scale to grade learner‟s performance. Credit assignment for courses is based on 15 weeks teaching learning process, however content of courses is to be taught in 12-13 weeks and remaining 2-3 weeks to be utilized for revision, guest lectures, coverage of content beyond syllabus etc. Choice based Credit and grading system is implementedfrom the academic year 2016-17 through optional courses at department and institute level. This will be effective for SE, TE and BE from academic year 2017-18, 2018-19 and 2019-20 respectively. Dr. S. K. Ukarande Co-ordinator, Faculty of Technology, Member - Academic Council University of Mumbai, Mumbai
  • 3. 3 Ekeeda – Electronics & Telecommunication Engineering Chairman’s Preamble: The curriculum in higher education is a living entity. It evolves with time; it reflects the ever changing needs of the society and keeps pace with the growing talent of the students and the faculty. The engineering education in India is expanding in manifolds and the main challenge is the quality of education. All stakeholders are very much concerned about it. The curriculum of Electronics & Telecommunication in Mumbai University is no exception. In keeping with the demands of the changing times, it contains innovative features. The exposure to the latest technology and tools used all over the world is given by properly selecting the subjects. It is designed in such a way to incorporate the requirements of various industries. The major emphasis of this process is to measure the outcomes of the program. Program outcomes are essentially a range of skills and knowledge that a student will have at the time of post-graduation. So the curriculum must be refined and updated to ensure that the defined objectives and outcomes are achieved. I, as Chairman Ad-hoc Board of Studies in Electronics and Telecommunication Engineering, University of Mumbai, happy to state here that, the heads of the department and senior faculty from various institutes took timely and valuable initiative to frame the Program Educational objectives as listed below. Objectives:  To produce Electronics & Telecommunication engineers, having strong theoretical foundation, good design experience and exposure to research and development.  To produce researcher who have clear thinking, articulation and interest to carry out theoretical and/or applied research resulting in significant advancement in the field of specialization.  To develop an ability to identify, formulate and solve electronics and telecommunication engineering problems in the latest technology.  To develop the ability among students to synthesize data and technical concepts from applications to product design. These are the suggested and expected main objectives, individual affiliated institutes may add further in the list. I believe that the small step taken in the right direction will definitely help in providing quality education to the stake holders. This book of curricula is the culmination of large number of faculty members and supporting staff. It also reflects the creative contribution of hundreds of teachers – both serving and retired. I sincerely hope that the faculty and students of Electronics and Telecommunication in Mumbai University will take full advantage of dynamic features of curriculum and make teaching-learning process a truly sublime experience for all. At the end I must extend my gratitude to all experts and colleagues who contributed to make curriculum competent at par with latest technological development in the field of Electronics & Telecommunication Engineering. Dr. Uttam D. Kolekar Chairman, Ad-hoc Board of Studies in Electronics and Telecommunication Engineering
  • 4. 4 Ekeeda – Electronics & Telecommunication Engineering Program Structure for B.E. Electronics & Telecommunication Engineering (Rev. 2016) University of Mumbai (With Effect from 2017-2018) Semester III Course Code Course Name Teaching Scheme (Contact Hours) Credits Assigned Theory Pracs Tut Theory TW/ Pracs Total ECC301 Applied Mathematics- III 4 - 2@ 4 1 5 ECC302 Electronic Devices and Circuits I 4 - - 4 - 4 ECC303 Digital System Design 4 - - 4 - 4 ECC304 Circuit Theory and Networks 4 - 2@ 4 1 5 ECC305 Electronic Instrumentation and Control 4 - 2@ 4 1 5 ECL301 Electronic Devices and Circuits I Laboratory - 2 - - 1 1 ECL302 Digital System Design Laboratory - 2 - - 1 1 ECL303 OOP using JAVA Laboratory - 2 - - 1 1 Total 20 6 6 20 6 26 @ 2 hour to be taken as tutorial classwise Course Code Course Name Examination Scheme Theory TW Oral/ Prac Total Internal Assessment EndSem Exam Exam Duration (Hrs)Test1 Test 2 Avg ECC301 Applied Mathematics-III 20 20 20 80 03 25 -- 125 ECC302 Electronic Devices and Circuits I 20 20 20 80 03 -- -- 100 ECC303 Digital System Design 20 20 20 80 03 -- -- 100 ECC304 Circuit Theory and Networks 20 20 20 80 03 25 -- 125 ECC305 Electronic Instrumentation and Control 20 20 20 80 03 25 -- 125 ECL301 Electronic Devices and Circuits I Laboratory -- -- -- -- -- 25 25 50 ECL302 Digital System Design Laboratory -- -- -- -- -- 25 25 50 ECL303 OOP using JAVA Laboratory -- -- -- -- -- 25 25 50 Total 100 400 150 75 725
  • 5. 5 Ekeeda – Electronics & Telecommunication Engineering Semester IV Course Code Course Name Teaching Scheme (Contact Hours) Credits Assigned Theory Pracs Tut Theory TW/ Pracs Total ECC401 Applied Mathematics- IV 4 - 2@ 4 1 5 ECC402 Electronic Devices and Circuits II 4 - - 4 - 4 ECC403 Linear Integrated Circuits 4 - - 4 - 4 ECC404 Signals & Systems 4 - 2@ 4 1 5 ECC405 Principles of Communication Engineering 4 - - 4 - 4 ECL401 Electronic Devices and Circuits II Laboratory - 2 - - 1 1 ECL402 Linear Integrated Circuits Laboratory - 2 - - 1 1 ECL403 Principles of Communication Engineering Laboratory - 2 - - 1 1 Total 20 6 4 20 5 25 @ 2 hour to be taken as tutorial classwise Course Code Course Name Examination Scheme Theory TW Oral & Prac Total Internal Assessment End Sem Exam Exam Duration (Hrs)Test1 Test 2 Avg ECC401 Applied Mathematics- IV 20 20 20 80 03 25 -- 125 ECC402 Electronic Devices and Circuits II 20 20 20 80 03 -- -- 100 ECC403 Linear Integrated Circuits 20 20 20 80 03 -- -- 100 ECC404 Signals & Systems 20 20 20 80 03 25 -- 125 ECC405 Principles of Communication Engineering 20 20 20 80 03 -- -- 100 ECL401 Electronic Devices and Circuits II Laboratory -- -- -- -- -- 25 25 50 ECL402 Linear Integrated Circuits Laboratory -- -- -- -- -- 25 25 50 ECL403 Principles of Communication Engineering Laboratory -- -- -- -- -- 25 25 50 Total 100 400 125 75 700
  • 6. 6 Ekeeda – Electronics & Telecommunication Engineering Semester V Course Code Course Name Teaching Scheme (Contact Hours) Credits Assigned Theory Pracs Tut Theory TW/ Pracs Total ECC501 Microprocessor & Peripherals Interfacing 4 - - 4 - 4 ECC502 Digital Communication 4 - - 4 - 4 ECC503 Electromagnetic Engineering 4 - 1@ 4 1 5 ECC504 Discrete Time Signal Processing 4 - - 4 - 4 ECCDLO 501X Department Level Optional Course I 4 - - 4 - 4 ECL501 Microprocessor & Peripherals Interfacing Lab - 2 - - 1 1 ECL502 Digital Communication Lab - 2 - - 1 1 ECL503 Business Communication & Ethics Lab - 2+2* - - 2 2 ECL504 Open Source Technology for Communication Lab - 2 - - 1 1 ECLDLO 501X Department Level Optional Lab I - - 2# - 1 1 Total 20 10 3 20 7 27 @ 1 hour to be taken as tutorial classwise #2 hours to be taken as either lab or tutorial based on subject requirement *2 hours to be taken as tutorial batchwise Course Code Course Name Examination Scheme Theory TW Oral/ Prac Total Internal Assessment EndSem Exam Exam Duration (Hrs)Test1 Test 2 Avg ECC501 Microprocessor & Peripherals Interfacing 20 20 20 80 03 -- -- 100 ECC502 Digital Communication 20 20 20 80 03 -- -- 100 ECC503 Electromagnetic Engineering 20 20 20 80 03 25 -- 125 ECC504 Discrete Time Signal Processing 20 20 20 80 03 -- -- 100 ECCDLO 501X Department Level Optional Course I 20 20 20 80 03 -- -- 100 ECL501 Microprocessor & Peripherals Interfacing Lab -- -- -- -- -- 25 25 50 ECL502 Digital Communication Lab -- -- -- -- -- 25 25 50 ECL503 Business Communication & Ethics Lab -- -- -- -- -- 50 -- 50 ECL504 Open Source Technology for Communication Lab -- -- -- -- -- 25 25 50 ECLDLO 501X Department Level Optional Lab I -- -- -- -- -- 25 -- 25 Total 100 400 175 75 750
  • 7. 7 Ekeeda – Electronics & Telecommunication Engineering Course Code Department Level Optional Course I ECCDLO 5011 Microelectronics ECCDLO 5012 TV & Video Engineering ECCDLO 5013 Finite Automata Theory ECCDLO 5014 Data Compression and Encryption
  • 8. 8 Ekeeda – Electronics & Telecommunication Engineering Semester VI Course Code Course Name Teaching Scheme (Contact Hours) Credits Assigned Theory Pracs Tut Theory TW/ Pracs Total ECC601 Microcontrollers & Applications 4 - -- 4 -- 4 ECC602 Computer Communication Networks 4 - - 4 - 4 ECC603 Antenna & Radio Wave Propagation 4 - - 4 - 4 ECC604 Image Processing and Machine Vision 4 - -- 4 -- 4 ECCDLO 602X Department Level Optional Course II 4 - - 4 - 4 ECL601 Microcontroller & Applications Lab - 2 - - 1 1 ECL602 Computer Communication Network Lab - 2 - - 1 1 ECL603 Antenna & Radio Wave Propagation Lab - 2 - - 1 1 ECL604 Image Processing and Machine Vision Lab - 2 - - 1 1 ECLDLO 602X Department Level Optional Lab II - 2 - - 1 1 Total 20 10 - 20 5 25 Course Code Course Name Examination Scheme Theory TW Oral & Prac Total Internal Assessment End Sem Exam Exam Duration (Hrs)Test1 Test 2 Avg ECC601 Microcontroller& Applications 20 20 20 80 03 -- -- 100 ECC602 Computer Communication Network 20 20 20 80 03 -- -- 100 ECC603 Antenna & Radio Wave Propagation 20 20 20 80 03 -- -- 100 ECC604 Image Processing and Machine Vision Lab 20 20 20 80 03 -- -- 100 ECCDLO 602X Department Level Optional Course II 20 20 20 80 03 -- -- 100 ECL601 Microcontroller & Applications Lab -- -- -- -- -- 25 25 50 ECL602 Computer Communication Network Lab -- -- -- -- -- 25 25 50 ECL603 Antenna & Radio Wave Propagation Lab -- -- -- -- -- 25 25 50 ECL604 Image Processing and Machine Vision Lab -- -- -- -- -- 25 25 50
  • 9. 9 Ekeeda – Electronics & Telecommunication Engineering ECLDLO 602X Department Level Optional Lab II -- -- -- -- -- 25 -- 25 Total 100 400 125 100 725
  • 10. 10 Ekeeda – Electronics & Telecommunication Engineering Course Code Department Level Optional Course II ECCDLO 6021 Digital VLSI Design ECCDLO 6022 Radar Engineering ECCDLO 6023 Database Management System ECCDLO 6024 Audio Processing
  • 11. 11 Ekeeda – Electronics & Telecommunication Engineering Semester VII Course Code Course Name Teaching Scheme (Contact Hours) Credits Assigned Theory Pracs Tut Theory TW/ Pracs Total ECC701 Microwave Engineering 4 - - 4 - 4 ECC702 Mobile Communication System 4 - - 4 - 4 ECC703 Optical Communication 4 - -- 4 - 4 ECCDLO 703X Department Level Optional Course III 4 - - 4 - 4 ILO701X Institute Level Optional Course I 3 - - 3 - 3 ECL701 Microwave Engineering Lab - 2 - - 1 1 ECL702 Mobile Communication System Lab - 2 - - 1 1 ECL703 Optical Communication Lab - 2 - - 1 1 ECLDLO 703X Department Level Optional Lab III - 2 - - 1 1 ECL704 Project-I - 6 - - 3 3 Total 19 14 - 19 7 26 Course Code Course Name Examination Scheme Theory TW Oral & Prac Total Internal Assessment End Sem Exam Exam Duration (Hrs)Test1 Test 2 Avg ECC701 Microwave Engineering 20 20 20 80 03 -- -- 100 ECC702 Mobile Communication System 20 20 20 80 03 -- -- 100 ECC703 Optical Communication 20 20 20 80 03 -- -- 100 ECCDLO 703X Department Level Optional Course III 20 20 20 80 03 -- -- 100 ILO701X Institute Level Optional Course I 20 20 20 80 03 -- -- 100 ECL701 Microwave Engineering Lab -- -- -- -- -- 25 25 50 ECL702 Mobile Communication System Lab -- -- -- -- -- 25 25 50 ECL703 Optical Communication Lab -- -- -- -- -- 25 25 50 ECLDLO 703X Department Level Optional Lab III -- -- -- -- -- 25 25 50 ECL704 Project-I -- -- -- -- -- 50 50 100 Total 100 400 150 150 800
  • 12. 12 Ekeeda – Electronics & Telecommunication Engineering Course Code Department Level Optional Course III Course Code Institute Level Optional Course I# ECCDLO7031 Neural Networks and Fuzzy Logic ILO7011 Product Lifecycle Management ECCDLO7032 Big Data Analytics ILO7012 Reliability Engineering ECCDLO7033 Internet Communication Engineering ILO7013 Management Information System ECCDLO7034 CMOS Mixed Signal VLSI ILO7014 Design of Experiments ECCDLO7034 Embedded System ILO7015 Operation Research ILO7016 Cyber Security and Laws ILO7017 Disaster Management and Mitigation Measures ILO7018 Energy Audit and Management ILO7019 Development Engineering # Common with all branches
  • 13. University of Mumbai, B. E. (Electronics & Telecommunication Engineering), Rev 2016 12 Ekeeda – Electronics & Telecommunication Engineering Semester VIII Course Code Course Name Teaching Scheme (Contact Hours) Credits Assigned Theory Pracs Tut Theory TW/ Pracs Total ECC801 RF Design 4 - -- 4 -- 4 ECC802 Wireless Networks 4 - - 4 - 4 ECCDLO 804X Department Level Optional Course IV 4 - - 4 - 4 ILO802X Institute Level Optional Course II 3 - - 3 - 3 ECL801 RF Design Lab - 2 - - 1 1 ECL802 Wireless Networks Lab - 2 - - 1 1 ECLDLO 804X Department Level Optional Lab IV - 2 - - 1 1 ECL803 Project-II - 12 - - 6 6 Total 15 18 - 15 9 24 Course Code Course Name Examination Scheme Theory TW Oral & Prac Total Internal Assessment End Sem Exam Exam Duration (Hrs)Test1 Test 2 Avg ECC801 RF Design 20 20 20 80 03 -- -- 100 ECC802 Wireless Networks 20 20 20 80 03 -- -- 100 ECCDLO 804X Department Level Optional Course IV 20 20 20 80 03 -- -- 100 ILO802X Institute Level Optional Course II 20 20 20 80 03 -- -- 100 ECL801 RF Design Lab -- -- -- -- -- 25 25 50 ECL802 Wireless Networks Lab -- -- -- -- -- 25 25 50 ECLDLO 804X Department Level Optional Lab IV -- -- -- -- -- 25 25 50 ECL803 Project-II -- -- -- -- -- 100 50 150 Total 80 320 175 125 700
  • 14. University of Mumbai, B. E. (Electronics & Telecommunication Engineering), Rev 2016 13 Ekeeda – Electronics & Telecommunication Engineering Course Code Department Level Elective Course IV Course Code Institute Level Elective Course II# ECCDLO8041 Optical Networks ILO8021 Project Management ECCDLO8042 Advanced Digital Signal Processing ILO8022 Finance Management ECCDLO8043 Satellite Communication ILO8023 Entrepreneurship Development and Management ECCDLO8044 Network management in Telecommunication ILO8024 Human Resource Management ILO8025 Professional Ethics and CSR ILO8026 Research Methodology ILO8027 IPR and Patenting ILO8028 Digital Business Management ILO8029 Environmental Management # Common with all branches
  • 15. 14 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC301 Applied Mathematics- III 04 -- @2 04 -- 01 05 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC301 Applied Mathematics- III 20 20 20 80 25 -- -- 125 @ 2 hour to be taken as tutorial classwise Course Pre-requisite: • Applied Mathematics I • Applied Mathematics II Course Objectives: 1. To build the strong foundation in Mathematics of students needed for the field of electronics and Telecommunication Engineering 2. To provide students with mathematics fundamentals necessary to formulate, solve and analyses complex engineering problems. 3. To prepare student to apply reasoning informed by the contextual knowledge to engineering practice. 4. To prepare students to work as part of teams on multi-disciplinary projects. Course Outcome: After successful completion of the course student will be able to  Students will demonstrate basic knowledge of Laplace Transform. Fourier series, Bessel Functions, Vector Algebra and Complex Variable.  Students will demonstrate an ability to identify and Model the problems of the field of Electronics and Telecommunication and solve it.  Students will be able to apply the application of Mathematics in Telecommunication Engineering
  • 16. 15 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Laplace Transform 07 1.1 Laplace Transform (LT) of Standard Functions: Definition of Laplace transform, Condition of Existence of Laplace transform, Laplace transform of eat ,Sin(at),cos(at),sinh(at),cosh(at),tn Heaviside unit step function, Dirac-delta function, Laplace transform of Periodic function 1.2 Properties of Laplace Transform: Linearity, first shifting theorem, second shifting theorem, multiplication by t n , Division by t, Laplace Transform of derivatives and integrals, change of scale, convolution theorem, Evaluation of integrals using Laplace transform. 2 Inverse Laplace Transform & its Applications 06 2.1 Partial fraction method, Method of convolution, Laplace inverse by derivative 2.2 Applications of Laplace Transform: Solution of ordinary differential equations, Solving RLC circuit differential equation of first order and second order with boundary condition using Laplace transform (framing of differential equation is not included) 3 Fourier Series 11 3.1 Introduction: Orthogonal and orthonormal set of functions, Introduction of Dirchlet‟s conditions, Euler‟s formulae. 3.2 Fourier Series of Functions: Exponential, trigonometric functions of any period =2L, even and odd functions, half range sine and cosine series 3.3 Complex form of Fourier series, Fourier integral representation, Fourier Transform and Inverse Fourier transform of constant and exponential function. 4 Vector Algebra & Vector Differentiation 07 4.1 Review of Scalar and Vector Product: Scalar and vector product of three and four vectors, Vector differentiation, Gradient of scalar point function, Divergence and Curl of vector point function 4.2 Properties: Solenoidal and irrotational vector fields, conservative vector field
  • 17. 16 Ekeeda – Electronics & Telecommunication Engineering 5 Vector Integral 06 5.1 Line integral 5.2 Green‟s theorem in a plane, Gauss‟ divergence theorem and Stokes‟ theorem 6 Complex Variable & Bessel Functions 11 6.1 Analytic Function: Necessary and sufficient conditions (No Proof), Cauchy Reiman equation Cartesian form (No Proof) Cauchy Reiman Equation in polar form (with Proof), Milne Thomson Method and it application, Harmonic function, orthogonal trajectories 6.2 Mapping: Conformal mapping, Bilinear transformations, cross ratio, fixed points 6.3 Bessel Functions: Bessel‟s differential equation, Properties of Bessel function of order +1/2 and -1/2, Generating function, expression of cos(xsin), sin (x sin) in term of Bessel functions Note: Term Work should be based on Tutorials. Textbooks : 1. H.K. Das, “Advanced engineering mathematics”, S . Chand, 2008 2. A. Datta, “Mathematical Methods in Science and Engineering”, 2012 3. B.S. Grewal, “Higher Engineering Mathematics”, Khanna Publication Reference Books: 1. B. V. Ramana, “Higher Engineering Mathematics”, Tata Mc-Graw Hill Publication 2. Wylie and Barret, “Advanced Engineering Mathematics”, Tata Mc-Graw Hill 6th Edition 3. Erwin Kreysizg, “Advanced Engineering Mathematics”, John Wiley & Sons, Inc 4. Murry R. Spieget, “Vector Analysis”, Schaum‟s outline series, Mc-Graw Hill Publication
  • 18. 17 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC302 Electronic Devices & Circuits-I 04 -- -- 04 -- -- 04 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC302 Electronic Devices & Circuits-I 20 20 20 80 -- -- -- 100 Course Pre-requisite: • Basic Electrical Engineering • Applied Physics Course Objectives: 1. To understand operation of semiconductor devices. 2. To understand DC analysis and AC models of semiconductor devices. 3. To apply concepts for the design of Regulators and Amplifiers 4. To verify the theoretical concepts through laboratory and simulation experiments. 5. To implement mini projects based on concept of electronics circuit concepts. Course Outcome: After successful completion of the course student will be able to 1. Understand the current voltage characteristics of semiconductor devices, 2. Analyze dc circuits and relate ac models of semiconductor devices with their physical Operation, 3. Design and analyze of electronic circuits, 4. Evaluate frequency response to understand behaviour of Electronics circuits.
  • 19. 18 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Diode and material science 06 1.1 Study of various types of resistor, capacitor and inductors 1.2 Basic fabrication steps of passive elements. 1.3 PN junction Diode characteristics, small signal model 2 Rectifier, Filters and Regulator 08 2.1 Analysis and design of rectifier circuit with Filters (L, LC, C,CLC,CRC) 2.2 Concept of load and line regulation in power supply circuits. 2.3 Analysis and design of zener voltage regulator 3 Transistor biasing and design 08 3.1 Operation of BJT, FET (N-CHANNEL, P-CHANNEL) with characteristics and equation. 3.2 Bipolar Junction Transistor: BJT characteristics, DC/AC load line, DC analysis and design of fixed bias, collector to base bias and voltage divider bias, stability factor analysis 3.3 Junction Field Effect Transistor: Analysis and design of self- bias and voltage divider bias, zero temp drift biasing. 4 Transistor modeling and Small signal analysis of amplifier 12 4.1 Hybrid and representation. hybrid-pi model of BJT with graphical 4.2 Small signal model of FET with graphical representation. 4.3 Small signal analysis (Zi, Zo, Av and Ai) of CE, CB, and CC configurations using hybrid-pi model of BJT 4.4 small signal (mid-frequency) analysis of CS, CD and CG amplifiers using FET 5 High frequency response of BJT and FET amplifiers 08 5.1 High frequency hybrid-pi equivalent Circuits of BJT and FET, Miller effect and Miller capacitance, gain bandwidth product 5.2 Effects of capacitors on frequency response of single stage amplifier using BJT and FET 5.3 Analysis of single stage amplifiers at HF and gain bandwidth product.
  • 20. 19 Ekeeda – Electronics & Telecommunication Engineering 6 Design of small signal amplifiers 06 6.1 Design of single stage RC Coupled CE amplifier. 6.2 Design of single stage RC Coupled CS amplifier. (USE of parameters from data sheet compulsory) Textbooks : 1. D. A. Neamen, “Electronic Circuit Analysis and Design,” Tata McGraw Hill, 2nd Edition. 2. A. S. Sedra, K. C. Smith, and A. N. Chandorkar, “Microelectronic Circuits Theory and Applications,” International Version, OXFORD International Students, 6th Edition 3. R. S. Dudhe and M. Farhan, “Electronic Devices and Circuits,” Synergy Knowledgeware, 1st Edition, 2013. Reference Books: 1. Boylestad and Nashelesky, “Electronic Devices and Circuits Theory,” Pearson Education, 11th Edition. 2. A. K. Maini , “Electronic Devices and Circuits,” Wiley. 3. T. L. Floyd, “Electronic Devices,”Prentice Hall, 9th Edition, 2012. 4. A. Rockett, “Material Science of Semiconductors,”, Springer, 1st Edition, 2009 5. A. Mottershead, “Electronic Devices and Circuits; An Introduction,”
  • 21. 20 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC303 Digital System Design 04 -- -- 04 -- -- 04 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC303 Digital System Design 20 20 20 80 -- -- -- 100 Course Objectives: 1. To understand number representation and conversion between different representation in digital electronic circuits. 2. To analyze logic processes and implement logical operations using combinational logic circuits. 3. To understand characteristics of memory and their classification. 4. To understand concepts of sequential circuits and to analyze sequential systems in terms of state machines. 5. To understand concept of Programmable Devices, PLA, PAL, CPLD and FPGA and implement digital system using VHDL. 6. To implement combinational and sequential circuits using VHDL. Course Outcome: After successful completion of the course student will be able to 1. Develop a digital logic and apply it to solve real life problems. 2. Analyze, design and implement combinational logic circuits. 3. Classify different semiconductor memories. 4. Analyze, design and implement sequential logic circuits. 5. Analyze digital system design using PLD. 6. Simulate and implement combinational and sequential circuits using VHDL systems.
  • 22. 21 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Number Systems and Codes 04 1.1 Review of Number System, Binary Code, Binary Coded Decimal, Octal Code, Hexadecimal Code and their conversions, Binary Arithmetics, Gray Code 2 Logic Gates and Combinational Logic Circuits 18 2.1 Analog and Digital signals and systems, Logic levels, TTL and CMOS Logic families and their characteristics 2.2 Digital logic gates, Realization using NAND, NOR gates, Boolean Algebra, De Morgan‟s Theorem, SOP and POS representation, K Map up to four variables and Quine- McClusky method 2.3 Arithmetic Circuits: Half adder, Full adder, Half Subtractor, Full Subtractor, Serial and Parallel Addition, Carry Look ahead adder and BCD adder. Binary Multiplier, Magnitude Comparator, 2.4 Multiplexer and De-multiplexer: Multiplexer operations, cascading of Multiplexer, Boolean Function implementation using multiplexer and basic gates, de-multiplexer, encoder and decoder 3 Different Types of Memory 02 Classification and Characteristics of memory, SRAM, DRAM, ROM, PROM, EPROM and Flash memories 4 Sequential Logic Circuits: 12 4.1 Flip flops: RS, JK, Master slave flip flops; T & D flip flops with various triggering methods, Conversion of flip flops, Registers: SISO, SIPO, PISO, PIPO, Universal shift registers. 4.2 Counters: Asynchronous and Synchronous, Up/Down, MOD N, BCD 4.3 Applications of Sequential Circuits: Frequency division, Ring Counter, Johnson Counter. models, State transition diagram, Design of Moore and Mealy circuits-Design of Serial Adder and vending Machine 4.4 State Reduction Techniques: Row elimination and Implication table methods 5 Programmable Logic Devices: 09 Introduction : Programmable Logic Devices (PLD),
  • 23. 22 Ekeeda – Electronics & Telecommunication Engineering Programmable Logic Array (PLA), Programmable Array Logic(PAL), CPLD and FPGA, Keyboard Encoder system design using PLD 6 VHSIC Hardware Description Language (VHDL) 03 6.1 Data types, Structural modeling using VHDL, Attributes, Data Flow behavioral, Implementation of Priority Encoder- combinational circuit and Fibonacci Series Generator- sequential circuits using VHDL Textbooks : 1. John F. Warkerly, “Digital Design Principles and Practices”, Pearson Education, Fourth Edition (2008). 2. R. P. Jain, “Modern Digital Electronics”, Tata McGraw Hill Education, Third Edition (2003). 3. J. Bhaskar, “VHDL Primer”, PHI, Third Edition (2009). 4. Volnei A. Pedroni, “Digital Electronics and Design with VHDL” Morgan Kaufmann Publisher (2008) Reference Books: 1. Morris Mano / Michael D. Ciletti, “Digital Design”, Pearson Education, Fourth Edition (2008). 2. Thomas L. Floyd, “Digital Fundamentals”, Pearson Prentice Hall, Eleventh Global Edition (2015). 3. Mandal, “Digital Electronics Principles and Applications”, McGraw Hill Education, First Edition (2010). 4. Stephen Brown & Zvonko Vranesic, “Fundamentals of Digital Logic Design with VHDL”, Second Edition, TMH (2009). 5. Ronald J. Tocci, Neal S. Widmer, “Digital Systems Principles and Applications”, Eighth Edition, PHI (2003) 6. Donald P. Leach / Albert Paul Malvino/Gautam Saha, “Digital Principles and Applications”, The McGraw Hill, Seventh Edition (2011).
  • 24. 23 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC304 Circuit Theory and Networks 04 -- @2 04 -- 1 05 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC304 Circuit Theory and Networks 20 20 20 80 25 -- -- 125 @ 2 hour to be taken as tutorial classwise Course Pre-requisite: • Basic Electrical Engineering • Solution to Differential Educations and Laplace Transform Course Objectives: 1. To analyze the Circuits in time and frequency domain 2. To study network Topology, network Functions, two port network 3. To synthesize passive network by various methods Course Outcome: After successful completion of the course student will be able to 1. Apply their knowledge in analysing Circuits by using network theorems. 2. Apply the time and frequency method of analysis. 3. Find the various parameters of two port network. 4. Apply network topology for analyzing the circuit 5. Synthesize the network using passive elements.
  • 25. 24 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Electrical circuit analysis 08 1.1 Analysis of DC & AC Circuits: Analysis of Circuits with and without controlled sources using generalized loop and node matrix methods Circuit Theorems: Superposition, Thevenin‟s, Norton‟s,maximum power transfer and reciprocity theorems 1.2 Magnetic circuits: Concept of Self and mutual inductances, coefficient of coupling, dot convention, equivalent circuit Coupled circuit- solution using mesh analysis 2 Graph Theory 08 2.1 Objectives of graph theory, Linear Oriented Graphs, graph terminologies Matrix representation of a graph: Incidence matrix, Circuit matrix, Cut-set matrix, reduced incident matrix, tieset matrix, f-cutset matrix. 2.2 Relationship between sub matrices A, B & Q. 2.3 KVL & KCL using matrix 3 Time and frequency domain analysis 08 3.1 Time domain analysis of R-L and R-C Circuits: Forced and natural response, initial and final values Solution using first order differential equation for impulse, step, ramp, exponential & sinusoidal signals 3.2 Time domain analysis of R-L-C Circuits: Forced and natural response, effect of damping factor. Solution using second order equation for step, ramp, exponential & sinusoidal signals. 3.3 Frequency domain analysis: Frequency - domain representation of R, L,C , initial value theorem & final value theorem, applications of Laplace Transform in analyzing electrical circuits 4 Network functions 08 4.1 Network functions for the one port and two port networks, Driving point and transfer functions, Poles and Zeros of Network functions, necessary condition for driving point functions, necessary condition for transfer functions, calculation of residues by analytical and graphical methods,
  • 26. 25 Ekeeda – Electronics & Telecommunication Engineering Time domain behavior as related to the Pole-Zero plot Stability & causality, testing for Hurwitz polynomial 4.2 Analysis of ladder & symmetrical lattice network 5 Two port Networks 08 5.1 Parameters: Open Circuits, short Circuit, Transmission and Hybrid parameters, relationship among parameters, conditions for reciprocity and symmetry 5.2 Interconnections of Two-Port networks T & π representation. 5.3 Terminated two-port networks 6 Synthesis of RLC circuits 08 6.1 Positive Real Functions: Concept of positive real function , testing for necessary and sufficient conditions for Positive real Functions 6.2 Synthesis of LC, RC & RL Circuits: properties of LC, RC & RL driving point functions, LC, RC & RL network Synthesis in Cauer-I & Cauer-II , Foster-I & Foster-II forms Note: Term Work should be based on Tutorials. Textbooks :  Franklin F Kuo, “Network Analysis and Synthesis”, Wiley Toppan, 2nd.ed. 1966  M E Van Valkenburg, “Network Analysis”, Prentice-Hall of India Pvt Ltd, New Delhi, 26th Indian Reprint, 2000 Reference Books: 1. A Chakrabarti, “Circuit Theory”, Dhanpat Rai & Co., Delhi, 6h Edition 2. A. Sudhakar, Shyammohan S. Palli “circuits and Networks, Tata McGraw-Hill education 3. Smarajit Ghosh, Network Theory Snallysis & Syntshesis, PHI learning 4. K.S. Suresh Kumar, Elecric circuit analysis, Pearson (2013) 5. D Roy Choudhury, Networks and Systems, New Age International 1998. TUTORIALS: At least 10 tutorials covering various topics of the syllabus.
  • 27. 26 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC305 Electronic Instrumentation & Control 04 -- @2 04 -- 1 05 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC305 Electronic Instrumentation & Control 20 20 20 80 25 -- -- 125 @ 2 hour to be taken as tutorial classwise Course Pre-requisite: • Basic Electrical Engineering Course Objectives:  To provide basic knowledge about the various sensors and data acquisition systems applied in Wireless sensor network.  To provide fundamental concepts of control system such as mathematical modeling, time response and frequency response.  To develop concepts of stability and its assessment criteria. Course Outcome: After successful completion of the course student will be able to  Students will be able to explain principle of operation for various sensors.  Students will be able to describe functional blocks of data acquisition system.  Students will be able to find transfer functions for given system.  Students will be able to calculate time domain and frequency domain parameter for given system  Students will be able to predict stability of given system using appropriate criteria.
  • 28. 27 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Principle of Measurement, Testing and Measuring instruments 07 1.1 Introduction to Basic instruments: Components of generalized measurement system Concept of accuracy, precision, linearity, sensitivity, resolution, hysteresis, calibration. 1.2 Measurement of Resistance: Kelvin‟s double bridge, Wheatstone bridge and Mega ohm bridge Measurement of Inductance: Maxwell bridge and Hey bridge Measurement of Capacitance: Schering bridge Q-Meter: Operating principle and applications Energy and power meters: Working of energy and power meter 2 Sensors and Transducers 08 2.1 Basics of sensors and Transducers-Active and passive transducers, characteristics and selection criteria of transducers, working principle of Eddy-current sensors, Pizoelectric transducers, photoelectric and photovoltaic sensors, capacitive sensors 2.2 Displacement and pressure- Potentiometers, pressure gauges, linear Variable differential transformers(LVDT) for measurement of pressure and displacement strain gauges 2.3 Temperature Transducers- Resistance temperature detectors(RTD). Thermistors and thermocouples , their ranges and applications 3 Telemetry and Data Acquisition System 08 3.1 Introduction and characteristics, Landline Telemetry, Radio Telemetry Types of Multiplexing Systems, 3.2 Data Acquisition: Components of Analog and Digital Data Acquisition System, 3.3 Uses of Data Acquisition System, Use of recorders in Digital systems, Modern Digital Data Acquisition System. 4 Introduction to control system Analysis 07
  • 29. 28 Ekeeda – Electronics & Telecommunication Engineering 4.1 Introduction: Open and closed loop systems, example of control systems 4.2 Modelling: Modelling, Transfer function model of electrical systems, Block diagram reduction techniques and Signal flow graph 4.3 Dynamic Response: Standard test signals, transient and steady state behaviour of first and second order systems , steady state errors in feedback control systems and their types 5 Stability Analysis in Time Domain 08 5.1 Concept of stability: Routh and Hurwitz stability criterion 5.2 Root locus Analysis: Root locus concept, general rules for constructing root-locus ,root locus analysis of control system, concept of design of lag and lead compensator 6 Stability Analysis in frequency domain 10 6.1 Introduction: Frequency domain specification, Relationship between time and frequency domain specification of system,stability margins 6.2 Bode Plot: Magnitude and phase plot, Method of plotting Bode plot,Stability margins and analysis using bode plot. Frequency response analysis of RC,RL,RLC circuits 6.3 Nyquist Criterion: Concept of Polar plot and Nyquist plot, Nyquist stability criterion ,gain and phase margin Note: Term Work should be based on Tutorials. Textbooks : 1. A.K. Sawhney, “Electrical & Electronic Measurement & Instrumentation” – DRS . India 2. M.M.S. Anand, “Electronic Instruments and instrumentation Technology”. 3. H.S.Kalsi, “Electronic Instrumentation”-TMH, 2nd Edition. 4. Nagrath, M.Gopal, “Control System Engineering”, Tata McGraw Hill. 5. K.Ogata, “Modern Control Engineering, Pearson Education”, IIIrd edition. Reference Books: 1. Helfrick&Copper, “Modern Electronic Instrumentation & Measuring Techniques” – PHI 2. W.D. Cooper, “Electronic Instrumentation And Measuring Techniques” – PHI 3. Benjamin C.Kuo, “Automatic Control Systems, Eearson education”, VIIth edition
  • 30. 29 Ekeeda – Electronics & Telecommunication Engineering 4. Rangan C. S., Sarma G. R. and Mani V. S. V., "Instrumentation Devices And Systems", Tata McGraw-Hill, 2nd Ed., 2004. 5. Bell David A."Electronic Instrumentation and Measurements", PHI Pearson Education, 2006. 6. Madan Gopal, “Control Systems Principles and Design”, Tata McGraw hill, 7th edition,1997. 7. Normon, “Control System Engineering”, John Wiley & sons, 3rd edition.
  • 31. 30 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory TW/Pracs Tutorial Total ECL301 Electronic Devices & Circuits-I Laboratory -- 02 -- -- 1 -- 1 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECL301 Electronic Devices & Circuits-I Laboratory -- -- -- -- 25 25 -- 50 Laboratory plan Maximum of 8 practicals including minimum 2 simulations should be conducted based on following topics Study of different measuring instruments such as CRO, Function Generator, Multimeter, and Power Supply. (Compulsory) Filter circuits Biasing of BJT and FET Frequency response Zener regulator Single stage amplifiers Minimum One project based on: Design of single stage CE and CS amplifier Design of filter and regulator circuits Design of power supply Any other relevant topic based on syllabus Note : Small project should be considered as a part of term-work. Term Work: At least 08 Experiments including 02 simulations covering entire syllabus must be given during the “Laboratory session batch wise”. Computation/simulation based experiments are also encouraged. The experiments should be students centric and attempt should be made to make experiments more meaningful, interesting and innovative. Application oriented one mini-project can be conducted for maximum batch of four students.
  • 32. 31 Ekeeda – Electronics & Telecommunication Engineering Term work assessment must be based on the overall performance of the student with every experiments/tutorials and mini-projects are graded from time to time. The grades will be converted to marks as per “Choice Based Credit and Grading System” manual and should be added and averaged. Based on above scheme grading and term work assessment should be done. The practical and oral examination will be based on entire syllabus.
  • 33. 32 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory TW/Pracs Tutorial Total ECL302 Digital System Design Laboratory -- 02 -- -- 1 -- 1 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECL302 Digital System Design Laboratory -- -- -- -- 25 25 -- 50 Laboratory plan Maximum of 8 practicals including minimum 2 simulations should be conducted. Suggested list of experiments: 1. Verify different logic gates. 2. Simplification of Boolean functions. 3. Verify Universal gates NAND and NOR and design EXOR and EXNOR gates using Universal gates. 4. Implement Half adder, Full adder, Half subtractor and Full subtractor circuits. 5. Implement BCD adder using four bit binary adder IC-7483. 6. Flip flops conversion JK to D, JK to T and D to TFF. 7. Implement logic equations using Multiplexer. 8. Design synchronous MOD N counter using IC-7490. 9. Verify encoder and decoder operations. 10. Implement digital circuits to perform binary to gray and gray to binary operations. 11.Verify truth table of different types of flip flops. 12. Verify different counter operations. 13. Write VHDL simulation code for different logic gates. 14. Write VHDL simulation code for combinational and sequential circuits 15. Write VHDL simulation code for 4:1 Multiplexer, 2 line to 4 line binary decoder
  • 34. 33 Ekeeda – Electronics & Telecommunication Engineering Minimum One project Suggested list of Mini Projects: 1. Design Clock pulse generator. 2. Design Clap operated remote control for Fan. 3. Design BCD counter and show operation on Seven Segment Display. 4. Design digital stop watch. 5. Write VHDL code to implement traffic light controller. 6. Design water level indicator for overhead water tank. 7. Design frequency divider circuit. 8. Design switch debounce circuit. 9. Design sequence generator circuit. 10. Design sequence detector circuit. 11. Design Even/Odd parity generator/checker circuit. 12. Design simple LED flasher circuit. 13. Design digital dice. 14. Design fastest finger first indicator. 15. Design Toggle switch using TFF. Note : Small project should be considered as a part of term-work. Term Work: At least 08 Experiments including 02 simulations covering entire syllabus must be given during the “Laboratory session batch wise”. Computation/simulation based experiments are also encouraged. The experiments should be students centric and attempt should be made to make experiments more meaningful, interesting and innovative. Application oriented one mini-project can be conducted for maximum batch of four students. Term work assessment must be based on the overall performance of the student with every experiments/tutorials and mini-projects are graded from time to time. The grades will be converted to marks as per “Choice Based Credit and Grading System” manual and should be added and averaged. Based on above scheme grading and term work assessment should be done. The practical and oral examination will be based on entire syllabus.
  • 35. 34 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory TW/Pracs Tutorial Total ECL303 OOP using JAVA laboratory -- 02 -- -- 1 -- 1 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECL303 OOP using JAVA laboratory -- -- -- -- 25 25 -- 50 Course Pre-requisites: • Fundamentals of C-Programming • Control Structures • Arrays and String Course Objectives: 1. To understand Object Oriented Programming and its principles. 2. To describe & explain keywords and Data types. 3. Able to implement Methods, Constructors, Arrays, Multithreding and Applet 4. To help students to understand how to use a programming language to resolve problems. Course Outcomes:  Students will be able to code a program using JAVA constructs.  Students will be able to understand fundamental features of an object oriented language: object classes and interfaces, exceptions and libraries of object collections.  Students will be able to develop a program that efficiently implements the algorithm for given tasks.  Students will be able to utilize the knowledge acquired in this course to develop higher level algorithms.
  • 36. 35 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Fundamental Concepts of Object Oriented Programming 06 1.1 Introduction to Object-Oriented Programming 1.2 Classes, Objects, Creating Classes and Objects, Principles of OOP: Abstraction, Encapsulation, Inheritance, Polymorphism 1.3 Differences And Similarity Between C and Java 2 Fundamental Of Java Programming 08 2.1 Features of Java, JDK Environment & Tools, Structure of Java Program 2.2 Java Keywords, Super Keyword, Final Keyword, Abstract Class 2.3 Data Types, Variables, Operators,Expressions 2.4 Input Output Using Scanner Class 2.5 Exception Handling, Object-Oriented Containers 3 Method, Constructors, Destructors And Arrays 04 3.1 Passing and Returning Parameters to Methods 3.2 Constructor and Types, Destructor 3.3 Arrays and Types: Create, One Dimensional Arrays, Two Dimensional Array, Multidimensional Array, String Array 4 Inheritance, Interface And Package 04 4.1 Types of Inheritance: Single, Multilevel, Hierarchical 4.2 Method Overloading and Method Overriding 4.3 Interface 4.4 Packages 5 Multithreading And Applet 04 5.1 Life Cycle Of Thread 5.2 Priority In Multithreading 5.3 Applet Life Cycle 5.4 Creating Applet, Applet Tag
  • 37. 36 Ekeeda – Electronics & Telecommunication Engineering Textbooks : 1. Herbert Schidt, “The Complete Reference”, Tata McGraw-Hill Publishing Company Limited, Ninth Edition 2. D.T. Editorial Services ,“Java 8 Programming Black Book”, Dreamtech Press, Edition: 2015 3. Yashwant Kanitkar,”Let Us Java”, BPB Publications; 2nd Edition edition. Reference Books: 1. Java: How to Program, 8/e, Dietal, Dietal, PHI 2. Grady Booch, James Rumbaugh, Ivar Jacobson, “The Unified Modeling Languageser Guide”, Pearson Education 3. Sachin Malhotra, Saurabh Chaudhary “Programming in Java”, Oxford University Press, 2010 Software Tools: 1. Raptor-Flowchart Simulation:http://raptor.martincarlisle.com/ 2. Eclipse: https://eclipse.org/ 3. Netbeans:https://netbeans.org/downloads/ 4. CodeBlock:http://www.codeblocks.org/ 5. J-Edit/J-Editor/Blue J Online Repository: 1. Google Drive 2. GitHub 3. Code Guru
  • 38. 37 Ekeeda – Electronics & Telecommunication Engineering Laboratory plan Maximum of 8 practicals including minimum 2 simulations should be conducted based on following topics Section Experiment Name Module 1. Write a program using command line argument in java. • Echoing Command-Line Arguments. • Parsing Numeric Command-Line arguments. Module 1 2. Study of simple java programs • WAP to calculate area & circumference of circle • WAP to swap given two strings • WAP to separate out digits of a number • WAP to convert temperature from Fahrenheit to Celsius • WAP to find a square , squarroot, and Cube of a given no. using abstraction Module 1 3. Study of different operators in java • WAP to compare two numbers. • WAP to print truth table for java logical operators • WAP to read the number & shift left & right by 3 bits. Module 1 4. Write a program for various ways of accepting data through keyboard & display its content. • Read through DataInputstream. • Read input through Scanner. • Read input through BufferedReader. Module 2 5. Study of Arrays Write a program for addition, subtraction and multiplication of two matrices. Module 3 6. Study of Objects and Classes • Define a class to represent a bank account. Include the following members: Data: name of the depositor account number Module 3
  • 39. 38 Ekeeda – Electronics & Telecommunication Engineering type of account balance amount in the account Methods: 1.to assign initial values 2.to deposit an amount 3.to withdraw an amount after checking balance. 4.to display the name & balance • WAP using this keyword 7. Study of Strings. Accept the two strings from user & do the following operations • convert to lowercase • convert to uppercase • Replace all appearance of one character by another • Compare two strings • Derive the substring of a string • Derive the position of a character in a string • Calculate the length of a string • Derive the nth character of a string Module 2 8. WAP to implement following constructors • Default constructor • Parameterized constructor Module 3 9. Study of Interface. Create an interface Area & implement the same in different classes Rectangle ,circle ,triangle. Module 4 10. Study of utility package • WAP to generate a year using random class and check whether it is leap or not. • Write a program to display current date. Also display Time in hours & Module 4
  • 40. 39 Ekeeda – Electronics & Telecommunication Engineering Staff Minutes using Date class. 11. Study of Inheritance Typist Teacher Officer subject Regular Casual name dailywedges Module 4 12. Study of Exception Handling in java. Write a program to use throw finally and try catch to handle exception. Module 2 Staff code
  • 41. 40 Ekeeda – Electronics & Telecommunication Engineering 13. Study of Multithreading. WAP to illustrate function yield(), isAlive(), sleep(), join(). Create three threads as P,Q,R. Thread P has maximum priority, thread Q has minimum priority, thread R has normal priority. Module 5 14. Study graphics using applet. WAP to draw all geometric shapes and fill them with different colors. Module 5 Minimum One project Suggested list of mini projects 1. Inventory Control System 2. Develop Calculator 3. Develop Editor ( Example: Notepad) 4. Devlop Multimedia App to teach primary students (Sahpes, Colors, etc.) 5. Create an audio or video applet or swing based application with play, pause and stop options. Note : Small project should be considered as a part of term-work. Term Work: At least 10 experiments covering entire syllabus should be set to have well predefined inference and conclusion. The experiments should be students centric and attempt should be made to make experiments more meaningful, interesting and innovative. Application oriented one mini-project can be conducted for maximum batch of four students. Term work assessment must be based on the overall performance of the student with every experiments/tutorials and mini-projects are graded from time to time. The grades will be converted to marks as per “Choice Based Credit and Grading System” manual and should be added and averaged. Based on above scheme grading and term work assessment should be done. The practical and oral examination will be based on entire syllabus. Students are encourages to share their experiments/mini project codes on online repository. Practical from any 10 sections out of 14 sections is compulsory . Practical exam slip should cover all at least 10 sections.
  • 42. 41 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC401 Applied Mathematics- IV 04 -- @2 04 -- 01 05 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC401 Applied Mathematics- IV 20 20 20 80 25 -- -- 125 @2 hour to be taken as tutorial classwise Course Pre-requisite: • Applied Mathematics I • Applied Mathematics II • Applied Mathematics III Course Objectives: 1. To build the strong foundation in Mathematics of students needed for the field of Electronics and Telecommunication Engineering 2. To provide students with mathematics fundamentals necessary to formulate, solve and analyses complex engineering problems. 3. To prepare student to apply reasoning informed by the contextual knowledge to engineering practice. 4. To prepare students to work as part of teams on multi-disciplinary projects Course Outcome: After successful completion of the course student will be able to 1. Demonstrate basic knowledge of Calculus of variation, Vector Spaces, Matrix Theory, Random Variables, Probability Distributions, Correlation and Complex Integration. 2. Demonstrate an ability to identify and Model the problems in the field of Electronics and Telecommunication and solve it. 3. Apply the application of Mathematics in Telecommunication Engineering.
  • 43. 42 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Calculus of Variation: 06 1.1 Euler‟s Langrange equation, solution of Euler‟s Langrange equation (only results for different cases for Function) independent of a variable, independent of another variable, independent of differentiation of a variable and independent of both variables 1.2 Isoperimetric problems, several dependent variables 1.3 Functions involving higher order derivatives: Rayleigh-Ritz method 2 Linear Algebra: Vector Spaces 06 2.1 Vectors in n-dimensional vector space: properties, dot product, cross product, norm and distance properties in n-dimensional vector space. 2.2 Vector spaces over real field, properties of vector spaces over real field, subspaces 2.3 The Cauchy-Schwarz inequality, Orthogonal Subspaces, Gram-Schmidt process 3 Linear Algebra: Matrix Theory 10 3.1 Characteristic equation, Eigen values and Eigen vectors, properties of Eigen values and Eigen vectors. 3.2 Cayley-Hamilton theorem (without proof), examples based on verification of Cayley- Hamilton theorem. 3.3 Similarity of matrices, Diagonalisation of matrices. 3.4 Functions of square matrix, derogatory and non-derogatory matrices. 4 Probability 10 4.1 Baye‟s Theorem (without proof) 4.2 Random variable: Probability distribution for discrete and continuous random variables, Density function and distribution function, expectation, variance. 4.3 Moments, Moment Generating Function.
  • 44. 43 Ekeeda – Electronics & Telecommunication Engineering 4.4 Probability distribution: Binomial distribution, Poisson & normal distribution (For detailed study) 5 Correlation 04 5.1 Karl Pearson‟s coefficient of correlation, Covariance, Spearman‟s Rank correlation, 5.2 Lines of Regression. 6 Complex integration 12 6.1 Complex Integration:Line Integral, Cauchy‟s Integral theorem for simply connected regions, Cauchy‟s Integral formula. 6.2 Taylor‟s and Laurent‟s Series 6.3 Zeros, singularities, poles of f(z), residues, Cauchy‟s Residue theorem. 6.4 Applications of Residue theorem to evaluate real Integrals of different types. Note: Term Work should be based on Tutorials. Textbooks : 1. H.K. Das, “Advanced engineering mathematics”, S . Chand, 2008 2. A. Datta, “Mathematical Methods in Science and Engineering”, 2012 3. B.S. Grewal, “Higher Engineering Mathematics”, Khanna Publication 4. P.N.Wartilar&J.N.Wartikar, “A Text Book of Applied Mathematics” Vol. I & II, Vidyarthi Griha Prakashan, Pune Reference Books: 1. B. V. Ramana, “Higher Engineering Mathematics”, Tata Mc-Graw Hill Publication 2. Wylie and Barret, “Advanced Engineering Mathematics”, Tata Mc-Graw Hill 6th Edition 3. Erwin Kreysizg, “Advanced Engineering Mathematics”, John Wiley & Sons, Inc 4. Seymour Lipschutz “Beginning Linear Algebra” Schaum‟s outline series, Mc-Graw Hill Publication 5. SeymourLipschutz “Probability” Schaum‟s outline series, Mc-Graw Hill Publication
  • 45. 44 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC402 Electronic Devices & Circuits-II 04 -- -- 04 -- -- 04 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC402 Electronic Devices & Circuits-II 20 20 20 80 -- -- -- 100 Course Pre-requisite: • Electronic Devices & Circuits-I Course Objectives:  To understand the operation of the various bias circuits of MOSFET and Analyze and design MOSFET bias circuits.  To understand the operation and design of multistage amplifier for a given specification.  To understand the operation and design of transformer coupled various types of power amplifier circuits.  To understand the effects of negative feedback on amplifier circuits.  To analyze the different RC and LC oscillator circuits to determine the frequency of oscillation. Course Outcome: After successful completion of the course student will be able to 1. Design and analyse the basic operations of MOSFET. 2. Know about the multistage amplifier using BJT and FET in various configuration to determine frequency response and concept of voltage gain. 3. Know about different power amplifier circuits, their design and use in electronics and communication circuits. 4. Know the concept of feedback amplifier and their characteristics. 5. Design the different oscillator circuits for various frequencies
  • 46. 45 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Introduction to MOSFET 08 1.1 MOSFET - Symbol, Types of MOSFET - Depletion and Enhancement type MOSFET (N channel and P channel), 1.2 Construction, Operation, and V-I characteristics of MOSFET 1.3 MOSFET biasing - Types of Depletion & enhancement MOSFET biasing, 1.4 MOSFET as amplifier 2 Introduction of Multistage amplifiers 06 2.1 RC coupled, transformer coupled, direct coupled, 2.2 Low and high frequency considerations of cascade amplifier, cascode amplifier (CE-CB), Darlington pair amplifier. 3 Design of Multistage amplifiers 10 Analysis and design considerations of multistage amplifiers (CE-CE, CS-CS, CS-CE,), effect of source and load resistance 4 Large signal amplifiers 08 4.1 Harmonic distortion and power efficiency of Class A, B, AB, and C amplifiers 4.2 Design of Class A, Class B, and Push-Pull Power amplifier design. 4.3 Thermal considerations and design selection of heat sinks. 5 Feedback amplifiers 08 5.1 Feedback concept, ideal feedback amplifier, classification of feedbacks, Various topologies 5.2 Analysis and design of different types of negative feedback. 6 Oscillators 08 6.1 Principle of oscillation, RC oscillator, twin T oscillator 6.2 Oscillator with LC feedback. Colpitts oscillator, Hartley oscillator, Crystal controlled oscillator. 6.3 Design of different oscillator circuits.
  • 47. 46 Ekeeda – Electronics & Telecommunication Engineering Textbooks :  D. A. Neamen, “Electronic Circuit Analysis and Design,” Tata McGraw Hill, 2nd Edition.  R. L. Boylestad,“Electronic Devices and Circuit Theory,” Pearson, 11th Edition.  T. F. Bogart,“Electronic Devices And Circuit,” Merrill, 6th Edition.  R. S. Dudhe and M. Farhan, “Electronic Devices and Circuits,” Synergy Knowledgeware, 1st Edition Reference Books:  Salivahanan, N. Suresh Kumar,“Electronic Devices and Circuits,” Tata McGraw Hill, 3rd Edition  J. Millman, Christos CHalkias, and Satyabratatajit, Millman‟s,“Electronic Devices and Circuits,” McGrawHill, 3rd Edition  Muhammad H. Rashid, “Microelectronics Circuits Analysis and Design,” Cengage Learning, 2nd Edition.
  • 48. 47 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC403 Linear Integrated Circuits 04 -- -- 04 -- -- 04 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC403 Linear Integrated Circuits 20 20 20 80 -- -- -- 100 Course Pre-requisite: • Basic Electrical Engineering • Electronic Devices & Circuits-I Course Objectives: 1. To understand the concepts, working principles and key applications of linear integrated circuits. 2. To perform analysis of circuits based on linear integrated circuits. 3. To design circuits and systems for particular applications using linear integrated circuits. Course Outcome: After successful completion of the course student will be able to 1. Understand the fundamentals and areas of applications for the integrated circuits. 2. Analyze important types of integrated circuits. 3. Demonstrate the ability to design practical circuits that perform the desired operations. 4. Understand the differences between theoretical, practical & simulated results in integrated circuits. 5. Select the appropriate integrated circuit modules to build a given application.
  • 49. 48 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Introduction to operational amplifiers 08 1.1 Analysis of differential amplifier circuit configurations using FETs, Effect of Swamping resistor, Current sources using FETs, Widlar current source, Wilson current source, Voltage sources and references, DC level shifters. 1.2 Ideal & Practical Operational Amplifiers, Operational amplifier characteristics, Operational amplifier parameters, Operational amplifier open loop and closed loop configurations. 2 Applications of Operational Amplifier 08 2.1 Amplifiers: Inverting, non-inverting, buffer, summing & difference amplifiers, integrator & differentiator (ideal & practical), current amplifier, instrumentation amplifier, log and antilog amplifiers.. 2.2 Converters: Current to voltage converters, voltage to current converters, voltage to frequency converter, frequency to voltage converter. 2.3 Active Filters: Second order active low pass, high pass, band pass and band reject filters, Introduction to switch capacitor filters. 2.4 Sine Wave Oscillators: RC phase shift oscillator, Wien bridge oscillator. 3 Non-Linear Applications of Operational Amplifier 08 3.1 Comparators: Inverting comparator, non-inverting comparator, zero crossing detector, window detector, peak detector, sample & hold circuits. 3.2 Schmitt Triggers: Inverting Schmitt trigger, non-inverting Schmitt trigger. 3.3 Waveform Generators: Square wave generator and triangular wave generator. 3.4 Precision Rectifiers: Half wave and full wave precision rectifiers. 4 Analog to Digital and Digital to Analog Convertors 08 4.1 Performance specifications of ADC, single ramp ADC, ADC using DAC, dual slope ADC, successive approximation ADC. 4.2 Performance specifications of DAC, binary weighted resistor DAC, R/2R ladder DAC, inverted R/2R ladder DAC. 5 Special Purpose Integrated Circuits 08 5.1 Functional block diagram and working of IC 555, design of astable and monostable multivibrator using IC 555, application
  • 50. 49 Ekeeda – Electronics & Telecommunication Engineering of IC 555 as pulse position modulator, pulse width modulator and Schmitt Trigger. 5.2 Functional block diagram and working of VCO IC 566 and application as frequency modulator, Functional block diagram and working of PLL IC 565 and application as FSK Demodulator, Functional block diagram and working of multiplier IC 534andapplication as a phase detector, Functional block diagram and working of waveform generator XR 2206 and application as sinusoidal FSK generator. 6 Voltage Regulators 08 6.1 Functional block diagram, working and design of three terminal fixed (78XX, 79XX series) and three terminal adjustable (LM 317, LM 337) voltage regulators. 6.2 Functional block diagram, working and design of general purpose 723 (LVLC, LVHC, HVLC and HVHC) with current limit and current fold-back protection, Switching regulator topologies, Functional block diagram and working of LT1070 monolithic switching regulator. Textbooks :  Ramakant A. Gayakwad, “Op-Amps and Linear Integrated Circuits”, Pearson Prentice Hall, 4th Edition.  K. R. Botkar, “Integrated Circuits”, Khanna Publishers (2004)  D. Roy Choudhury and S. B. Jain, “Linear Integrated Circuits”, New Age International Publishers, 4th Edition. Reference Books:  Sergio Franco, “Design with operational amplifiers and analog integrated circuits”, Tata McGraw Hill, 3rd Edition.  David A. Bell, “Operation Amplifiers and Linear Integrated Circuits”, Oxford University Press, Indian Edition.  R. F. Coughlin and F. F. Driscoll, “Operation Amplifiers and Linear Integrated Circuits”, Prentice Hall, 6th Edition.  “J. Millman, Christos CHalkias, and Satyabratatajit, Millman‟s,“Electronic Devices and Circuits,” McGrawHill, 3rdEdition”.
  • 51. 50 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC404 Signals and Systems 04 -- 2@ 04 -- 01 05 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC404 Signals and Systems 20 20 20 80 25 -- -- 125 @2 hour to be taken as tutorial classwise Course Pre-requisite: • Applied Maths-III • Circuit Theory and Networks Course Objectives: 1. To introduce students the concept and theory of signals and systems needed in electronics and telecommunication engineering fields. 2. To introduce students to the basic idea of signal and system analysis and its characterization in time and frequency domain Course Outcome: After successful completion of the course student will be able to 1. Understand about various types of signals and systems, classify them, analyze them, and perform various operations on them, 2. Understand use of transforms in analysis of signals and system in continuous and discrete time domain. 3. Observe the effect of various properties and operations of signals and systems. 4. Evaluate the time and frequency response of Continuous and Discrete time systems which are useful to understand the behaviour of electronic circuits and communication systems.
  • 52. 51 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Introduction to signals and systems 08 1.1 Introduction to signals: Definition, sampling theorem, sampling of continuous time signals, elementary signals: exponential, sine, step, impulse, ramp, rectangular, triangular, signum, sinc, operations on signals, 1.2 Classification of signals: Continuous and discrete time, deterministic and non-deterministic, periodic and aperiodic, symmetric (even) and asymmetric (odd), energy and power, causal and anti-causal signal, Case study of different signals from communication and biomedical field 1.3 Introduction to systems: Definition, Classification of systems: Static and dynamic, time variant and time invariant, linear and nonlinear, causal and non-causal, stable and unstable systems., communication and control system as examples 2 Time domain analysis of continuous time and discrete time systems 08 2.1 Representation of systems using differential /difference equation, Impulse, step and exponential response, system stability 2.2 Use of convolution integral and convolution sum for analysis of LTI systems, properties of convolution integral/sum, impulse response of interconnected systems 2.3 Correlation and spectral Density: auto-correlation, cross correlation, analogy between correlation and convolution, energy spectral density, power spectral density, relation of ESD,PSD with auto-correlation 3 Frequency domain analysis of continuous and discrete 10 signals: 3.1 Review of Fourier series: Trigonometric and exponential Fourier series representation of signals, Gibbs phenomenon, Discrete Time Fourier Series, properties, analogy between Continuous Time Fourier Series (CTFS) and Discrete Time Fourier Series (DTFS). 3.2 Fourier Transform (FT): Fourier Transform and Inverse Fourier Transform on periodic and non-periodic signals, limitations of CT/DT Fourier Transform and need for Laplace/Z Transform. 3.3 Overview of Laplace Transform: Need of Laplace Transform, review of unilateral and bilateral Laplace
  • 53. 52 Ekeeda – Electronics & Telecommunication Engineering Transform, properties, inverse of Laplace Transform, concept of Region of Convergence (ROC),poles and zeros, relation between continuous time Fourier Transform and Laplace Transform. 4 Z-Transform 08 4.1 Need of Z-Transform, definition of unilateral and bilateral Z- Transform, Z-Transform of finite and infinite duration sequences, properties, Inverse Z-Transform, relation between discrete time Fourier Transform and Z-Transform, Z- Transform of standard signals, ROC for ZT, plotting poles and zeros of transfer function. 4.2 Analysis of discrete time LTI systems using Z-Transform: Transfer Function, causality and stability of systems, frequency response (impulse and step), relation between Laplace Transform and Z–Transform. 5 State Space Analysis and Realization Structures 08 5.1 State Variable Analysis: Introduction to the notion of „state‟, systematic procedure for determining state equations, solution of state equations using Laplace transform, definition of exp(A) where A is a matrix, time domain solution of state equations. 5.2 Systems with finite duration and infinite duration, impulse response, recursive and non-recursive discrete time system, realization structures: direct form–I, direct form–II, Transpose, cascade, and parallel forms. 6 Applications of Signals and Systems 06 6.1 Signal Processing Applications: Speech and Audio Processing, Multimedia (image & video) processing, Underwater acoustic signal processing, Biological signal analysis 6.2 Communication and Control System Application: Modulation (Analog and Digital) process, Feedback/Feedforward Control system Textbooks : 1. NagoorKani, “Signals and Systems”, Tata McGraw Hill, Third Edition, 2011. 2. B.P. Lathi, “Principles of Linear Systems and Signals”, Oxford, Second Edition, 2010. 3. S. L. Nalbalwar, A. M. Kulkarni and S. P. Sheth, “Signals and Systems”, Synergy Knowledgeware, 2016. 4. Simon Haykin and Barry Van Veen, “Signals and Sytems”, John Wiley and Sons, Second Edition,2004.
  • 54. 53 Ekeeda – Electronics & Telecommunication Engineering Reference Books: 1. Hwei. P Hsu, “Signals and Systems”, Tata McGraw Hill, Third edition, 2010 2. V. Krishnaveni and A.Rajeshwari, “Signals and Systems”, Wiley-India, First Edition 2012. 3. NarayanaIyer, “Signals and Systems”, Cenage Learning, First Edition 2011. 4. Michael J Roberts, “Fundamentals of Signals and systems”, Tata McGraw Hill, special Indian Economy edition, 2009. 5. Rodger E Ziemer, William H. Tranter and D. Ronald Fannin, “Signals and Systems”, Pearson Education, Fourth Edition 2009. 6. Alan V. Oppenhiem, Alan S. Willsky and S. Hamid Nawab, “Signals and Systems”, Prentice-Hall of India, Second Edition, 2002.
  • 55. 54 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory Practical Tutorial Total ECC405 Principles of Communication Engineering 04 -- -- 04 -- -- 04 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECC405 Principles of Communication Engineering 20 20 20 80 -- -- -- 100 Course Pre-requisite: • Applied Maths III • Electronic Devices and Circuits I Course Objectives: 1. To introduce students to various modulation and demodulation techniques of analog communication. 2. To analyze different parameters of analog communication techniques. 3. To study pulse modulation and demodulation. Course Outcome: After successful completion of the course student will be able to 1. Use different modulation and demodulation techniques used in analog communication 2. Identify and solve basic communication problems 3. Analyze transmitter and receiver circuits 4. Compare and contrast design issues, advantages, disadvantages and limitations of analog communication systems
  • 56. 55 Ekeeda – Electronics & Telecommunication Engineering Module No. Unit No. Detailed Content Hours 1 Basics of Communication System 06 1.1 Block diagram, electromagnetic spectrum, signal bandwidth and power, types of communication channels, Introduction to time and frequency domain. 1.2 Types of noise, signal to noise ratio, noise figure and noise temperature, Friss transmission formula. 2 Amplitude Modulation and Demodulation 12 2.1 Basic concepts, signal representation, need for modulation 2.2 Spectrum, waveforms, modulation index, bandwidth, voltage distribution and power calculations 2.3 DSBFC: Principles, modulating circuits, low level and high level transmitters DSB suppressed carrier :Multiplier modulator, nonlinear modulator and switching modulator 2.4 Amplitude demodulation: Diode detector, practical diode detector, square law detector 2.5 Comparison of different AM techniques, Applications of AM and use of VSB in broadcast television 3 Angle Modulation and Demodulation 12 3.1 Frequency modulation (FM): Basic concept, mathematical analysis, spectrum of FM wave, sensitivity, phase deviation and modulation index, deviation and percent modulated waves, bandwidth requirement of angle modulated waves, deviation ratio, narrowband FM and wideband FM 3.2 Varactor diode modulator, FET reactance modulator, stabilized AFC, Direct FM transmitter, indirect FM Transmitter, noise emphasis and de-emphasis 3.3 Phase modulation (PM): Principle and working of transistor direct PM modulator and relationship and comparison between FM and PM 3.4 FM demodulation: Balance slope detector, Foster-Seely discriminator, ratio detector, FM demodulator using Phase lock loop (PLL), amplitude limiting and thresholding, comparison between FM demodulators, comparison between AM, FM and PM 3.5 Applications of FM and PM
  • 57. 56 Ekeeda – Electronics & Telecommunication Engineering 4 Radio Receivers 06 4.1 TRF, Super - heterodyne receiver, receiver parameters and choice of IF 4.2 AM receiver circuits and analysis, simple AGC, delayed AGC, forward AGC, and communication receiver 4.3 FM receiver circuits, comparison with AM receiver 4.4 Single and independent sideband (SSB and ISB) receivers 5 Analog Pulse Modulation & Demodulation 08 5.1 Sampling theorem for low pass signal, proof with spectrum, Nyquist criteria 5.2 Sampling techniques, aliasing error and aperture effect 5.3 PAM,PWM, PPM generation and detection 5.4 Applications of Pulse Communication 6 Multiplexing & De-multiplexing 04 6.1 Frequency Division Multiplexing transmitter & receiver block diagram 6.2 Time Division Multiplexing transmitter & receiver block diagram 6.3 Examples and applications of FDM and TDM Textbooks : 1. Kennedy and Davis, "Electronics Communication System", Tata McGraw Hill, Fourth edition. 2. B.P. Lathi, Zhi Ding "Modern Digital and Analog Communication system", Oxford University Press, Fourth edition. 3. Wayne Tomasi, "Electronics Communication Systems", Pearson education, Fifth edition. Reference Books: 1. Taub, Schilling and Saha, "Taub's Principles of Communication systems", Tata McGraw Hill, Third edition. 2. P. Sing and S.D. Sapre, "Communication Systems: Analog and Digital”, Tata McGraw Hill, Third edition. 3. Simon Haykin, Michel Moher, "Introduction to Analog and Digital Communication", Wiley, Second edition.
  • 58. 57 Ekeeda – Electronics & Telecommunication Engineering 4. Dennis Roddy and John Coolen, "Electronic Communication", Prentice Hall, Third Edition. 5. Louis Frenzel, “Communication Electronics”, Tata McGraw Hill, Third Edition. 6. Roy Blake, "Electronic Communication Systems", Delmar Publication, Second edition
  • 59. 58 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory TW/Pracs Tutorial Total ECL401 Electronic Devices & Circuits-II Laboratory -- 02 -- -- 1 -- 1 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECL401 Electronic Devices & Circuits-II Laboratory -- -- -- -- 25 25 -- 50 Laboratory plan Minimum 8 practicals including minimum 2 simulations should be conducted. Suggested list of experiments 1. Design and Analyze two stage BJT amplifier (Frequency response and performance parameters) 2. Design and Analyze two stage FET amplifier (Frequency response and performance parameters) 3. Design Multistage BJT amplifier and finding its parameters, Verify. 4. Design and Analyze Voltage series feedback amplifier using BJT/FET and verify its effect on frequency response. x 5. Design and Analyze Current series feedback using BJT/FET and verify its effect on frequency response. 6. Design Multistage JFET amplifier and finding its parameters, verify. 7. Design and Analyze RC Phase shift oscillator for different amplitude and frequency. 8. Design and Analyze Colpitt / Hartley oscillator for different amplitude and frequency. 9. Class C power amplifier and its efficiency Minimum One project based on: 1. Simple Emergency light. 2. DC servo amplifier using MOSFET. 3. Audio tone control circuit. 4. Public address system. 5. Automatic Door Bell
  • 60. 59 Ekeeda – Electronics & Telecommunication Engineering 6. Clapp Switch 7. Topic related to syllabus Note :Small project should be considered as a part of term-work. Term Work: At least 08 Experiments including 02 simulations covering entire syllabus must be given during the “Laboratory session batch wise”. Computation/simulation based experiments are also encouraged. The experiments should be students centric and attempt should be made to make experiments more meaningful, interesting and innovative. Application oriented one mini-project can be conducted for maximum batch of four students. Term work assessment must be based on the overall performance of the student with every experiments/tutorials and mini-projects are graded from time to time. The grades will be converted to marks as per “Choice Based Credit andGrading System” manual and should be added and averaged. Based on above scheme gradingand term work assessment should be done. The practical and oral examination will be based on entire syllabus.
  • 61. 60 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory TW/Pracs Tutorial Total ECL402 Linear Integrated Circuits Laboratory -- 02 -- -- 1 -- 1 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECL402 Linear Integrated Circuits Laboratory -- -- -- -- 25 25 -- 50 Laboratory plan Minimum 8 practicals including minimum 2 simulations should be conducted. Suggested list of experiments  Discrete Differential Amplifier  Inverting, Non inverting, Buffer, Summing & Difference amplifiers  Differentiator & Integrator  Instrumentation amplifier  I to V and V to I converters  V to F and F to V convertors  Active Filters  Wien Bridge Oscillator  RC Phase shift Oscillator  Inverting & Non inverting Schmitt trigger  Square & Triangular wave generator  Precision rectifiers  Peak detector & Sample & Hold Circuits  Analog to Digital converter
  • 62. 61 Ekeeda – Electronics & Telecommunication Engineering  Digital to Analog converter  Multivibrators using IC 555  PPM, PWM and Schmitt trigger using 555  Frequency modulatorusing VCO IC 566.  FSK DemodulatorusingPLL IC 565.  Phase detectorusing multiplier IC 534.  Sinusoidal FSK generator using XR 2206  Voltage Regulators using 78XX/79XX, 317/337, 723 Minimum One project based on: 1. Variable Power Supply 2. Data Acquisition System 3. Function Generator 4. Topic related to syllabus Note :Small project should be considered as a part of term-work. Term Work: At least 08 Experiments including 02 simulations covering entire syllabus must be given during the “Laboratory session batch wise”. Computation/simulation based experiments are also encouraged. The experiments should be students centric and attempt should be made to make experiments more meaningful, interesting and innovative. Application oriented one mini-project can be conducted for maximum batch of four students. Term work assessment must be based on the overall performance of the student with every experiments/tutorials and mini-projects are graded from time to time. The grades will be converted to marks as per “Choice Based Credit andGrading System” manual and should be added and averaged. Based on above scheme gradingand term work assessment should be done. The practical and oral examination will be based on entire syllabus.
  • 63. 62 Ekeeda – Electronics & Telecommunication Engineering Subject Code Subject Name Teaching Scheme Credits Assigned (Hrs.) Theory Practical Tutorial Theory TW/Pracs Tutorial Total ECL403 Principles of Communication Engineering Laboratory -- 02 -- -- 1 -- 1 Subject Code Subject Name Examination Scheme Theory Marks Term Work Practical & Oral Oral Total Internal assessment End Sem. ExamTest 1 Test2 Avg. Of Test 1 and Test 2 ECL403 Principles of Communication Engineering Laboratory -- -- -- -- 25 25 -- 50 Laboratory plan Minimum 8 practicals including minimum 2 simulations should be conducted. Suggested list of experiments 1. Generation and detection of AM (DSB-FC, DSB-SC,SSB) signal. 2. Generation and detection of FM signal. 3. Study of AM broadcast receiver (Super heterodyne). 4. Generation of PAM signal and verify the sampling theorem. 5. Generation of PPM, PWM signal. 6. Study of TDM and FDM multiplexing techniques. Suggested list of Minimum projects  AM transmitter/receiver.  FM transmitter/receiver.  PAM,PPM,PWM circuits with IC 555  FM remote encoder/decoder circuits,  Transistor Intercom circuit  Walkie -Talkie Circuit  Arduino based communication circuits
  • 64. 63 Ekeeda – Electronics & Telecommunication Engineering  Electronic voting machine.  Electronic Notice Board Using Android.  Home security system. Note :Small project should be considered as a part of term-work. Term Work: At least 08 Experiments including 02 simulations covering entire syllabus must be given during the “Laboratory session batch wise”. Computation/simulation based experiments are also encouraged. The experiments should be students centric and attempt should be made to make experiments more meaningful, interesting and innovative. Application oriented one mini-project can be conducted for maximum batch of four students. Term work assessment must be based on the overall performance of the student with every experiments/tutorials and mini-projects are graded from time to time. The grades will be converted to marks as per “Choice Based Credit and Grading System” manual and should be added and averaged. Based on above scheme grading and term work assessment should be done. The practical and oral examination will be based on entire syllabus.