ENERGY AND MINERAL
RESOURCES
Renewable Vs. Non-Renewable
Resources
Renewable resources can be replenished
over a fairly short period of time (months-
decades)
– Examples: Animals, Plants, Trees, Solar
energy, etc.
Non-Renewable Resources require
millions of years to form and accumulate
– Examples: Coal, Oil, Metals
Fossil Fuels
Fossil fuels are hydrocarbons that can be used
as a source of energy
Coal is formed by heat and pressure acting on
plant remains
– Stages of formation: Peat, Lignite, bituminous,
anthracite
– Anthracite releases the most energy and Peat
provides the least
– Used by power plants to produce electricity
– Coal releases sulfur compounds (acid rain), mercury,
carbon dioxide and other harmful chemicals
COAL TYPES
Petroleum and Natural Gas is formed by the
accumulation of plant and animal remains in the
ocean
– Pumped out of “oil traps”
– Used to make gasoline, fuel oil, plastic, etc.
Tar sands are deposits of sand and clay
that contain thick tar like hydrocarbons
called “bitumen”
– Must be “steamed off sands”
– Requires a lot of energy to retrieve bitumen
and process it (half as much energy to mine
as it supplies)
Tar Sand Mine
Oil Shale is shale that contains hydrocarbons
called kerogen
– Shale is heated to release Kerogen
– Very expensive to process (not economical to
mine)
Formation of Minerals Deposits
Definitions
– Mineral resources: Deposits of extractable
minerals
– Mineral reserve: Profitable mineral deposit
– Ore: Metallic minerals that are profitable to
mine
Igneous Processes
– Heavy minerals crystallize and accumulate in
magma chambers
– Yields: Gold, Silver, Copper, Mercury, Lead,
Platinum, Nickel, etc.
Hydrothermal Solutions
– Hot metal rich fluids are injected into rock by
magma intrusions
– As fluid cools metallic ions crystallize in veins
– Yields Gold, Silver, Mercury, etc.
Placer Deposits
– Heavy minerals are deposited in streambeds
as weathering of country rock occurs
– Yields: Gold, Silver, Platinum
Quartz Vein Panning for Placer Gold
Non-metallic Resources
These resources are divided into two
groups
– Building materials
Gravel, Sand, Limestone (cement), Rock Salt
– Industrial minerals
Abrasives (corundum), Limestone (steel)
Tilcon, New York
Industrial Minerals
Alternate Energy Sources
New energy sources MUST be developed
to replace fossil fuels!
Solar Energy
– Harnesses the suns energy
– Solar energy is “free” energy
– Passive Solar energy
Requires no special equipment (ex. Windows)
– Active solar energy
Utilizes special equipment (ex. Photovoltaic cells,
water heaters)
– Cons: High start up cost, not continuous
Solar Energy
Nuclear Energy
– Relies on nuclear fission of heavy elements to
heat water
– Cons: Dangerous, Produces hazardous waste
Wind Energy
– Uses wind turbines to generate electricity
– Can be used on a large or small scale
– Cons: unsightly, expensive start up, only good
in certain areas
Hydroelectric power
– Uses flowing water to turn turbines and
generate electricity
– Cons: Sediment behind dams builds up,
Wildlife disruption, Need suitable spot
Geothermal energy
– Uses hot water and steam from earth to turn
turbines and generate electricity
– Can be utilized by home owners
– Cons: Exhaustible, rare to find suitable spot
Tidal Power
– Traps incoming tidal waters and releases the
water during low tide to generate electricity
– Cons: Requires 8 meter tidal range (rare),
Requires suitable coastline
Pollution
Point source pollution
– Point source pollution comes from a known
spot
– Examples: Factories, Sewage discharge
Non-Point source pollution
– Non point source pollution has no specific
point of origin
– Examples: Oil on roadways, fertilizer/pesticide
runoff
Freshwater pollution
– We rely on freshwater for drinking water,
farming, tourism/sporting etc.
– Groundwater, once contaminated is
difficult/impossible to remediate
Land Pollution
– Farming depletes and poisons soil
– Mining destroys land surfaces
– Landfills leak dangerous chemicals
Freshwater Pollution
Land Pollution
Air pollution
– Fossil fuel combustion is the major source of
air pollution
– Fossil fuels cause/add:
Soot
Carbon dioxide (global warming, acidification)
Smog
Acid Rain
Mercury contamination
And much much more!
– Ozone layer is destroyed by CFC’s causing
skin cancer increases
– The world health organization attributes 3
million deaths per year to air pollution
Air Pollution
What Can We Do?
Every year in the US we throw out
30 million cell phones
18 million computers
8 million TV’s
Enough tires to encircle earth 3 times!
We are only 6% of earth’s population
Recycling
– Used items are turned into new product
Re-using
– Materials get used for another purpose or by
other people
Conservation
– Natural resources are used sparingly
Proper Disposal
– Dispose of waste in a responsible manner
Laws
1972-Clean Water Act
1974-Safe Drinking Water Act
1970-Clean Air Act
1976-Resource Conservation and
Recovery Act
1980-Comprehensive Environmental
Response, Compensation and Liability Act
(superfund)

ENERGY AND MINERAL RESOURCES.ppt

  • 1.
  • 2.
    Renewable Vs. Non-Renewable Resources Renewableresources can be replenished over a fairly short period of time (months- decades) – Examples: Animals, Plants, Trees, Solar energy, etc. Non-Renewable Resources require millions of years to form and accumulate – Examples: Coal, Oil, Metals
  • 3.
    Fossil Fuels Fossil fuelsare hydrocarbons that can be used as a source of energy Coal is formed by heat and pressure acting on plant remains – Stages of formation: Peat, Lignite, bituminous, anthracite – Anthracite releases the most energy and Peat provides the least – Used by power plants to produce electricity – Coal releases sulfur compounds (acid rain), mercury, carbon dioxide and other harmful chemicals
  • 4.
  • 5.
    Petroleum and NaturalGas is formed by the accumulation of plant and animal remains in the ocean – Pumped out of “oil traps” – Used to make gasoline, fuel oil, plastic, etc.
  • 6.
    Tar sands aredeposits of sand and clay that contain thick tar like hydrocarbons called “bitumen” – Must be “steamed off sands” – Requires a lot of energy to retrieve bitumen and process it (half as much energy to mine as it supplies)
  • 7.
  • 8.
    Oil Shale isshale that contains hydrocarbons called kerogen – Shale is heated to release Kerogen – Very expensive to process (not economical to mine)
  • 9.
    Formation of MineralsDeposits Definitions – Mineral resources: Deposits of extractable minerals – Mineral reserve: Profitable mineral deposit – Ore: Metallic minerals that are profitable to mine Igneous Processes – Heavy minerals crystallize and accumulate in magma chambers – Yields: Gold, Silver, Copper, Mercury, Lead, Platinum, Nickel, etc.
  • 10.
    Hydrothermal Solutions – Hotmetal rich fluids are injected into rock by magma intrusions – As fluid cools metallic ions crystallize in veins – Yields Gold, Silver, Mercury, etc. Placer Deposits – Heavy minerals are deposited in streambeds as weathering of country rock occurs – Yields: Gold, Silver, Platinum
  • 11.
    Quartz Vein Panningfor Placer Gold
  • 12.
    Non-metallic Resources These resourcesare divided into two groups – Building materials Gravel, Sand, Limestone (cement), Rock Salt – Industrial minerals Abrasives (corundum), Limestone (steel)
  • 13.
  • 14.
    Alternate Energy Sources Newenergy sources MUST be developed to replace fossil fuels! Solar Energy – Harnesses the suns energy – Solar energy is “free” energy – Passive Solar energy Requires no special equipment (ex. Windows) – Active solar energy Utilizes special equipment (ex. Photovoltaic cells, water heaters) – Cons: High start up cost, not continuous
  • 15.
  • 16.
    Nuclear Energy – Relieson nuclear fission of heavy elements to heat water – Cons: Dangerous, Produces hazardous waste
  • 17.
    Wind Energy – Useswind turbines to generate electricity – Can be used on a large or small scale – Cons: unsightly, expensive start up, only good in certain areas
  • 18.
    Hydroelectric power – Usesflowing water to turn turbines and generate electricity – Cons: Sediment behind dams builds up, Wildlife disruption, Need suitable spot
  • 19.
    Geothermal energy – Useshot water and steam from earth to turn turbines and generate electricity – Can be utilized by home owners – Cons: Exhaustible, rare to find suitable spot
  • 20.
    Tidal Power – Trapsincoming tidal waters and releases the water during low tide to generate electricity – Cons: Requires 8 meter tidal range (rare), Requires suitable coastline
  • 21.
    Pollution Point source pollution –Point source pollution comes from a known spot – Examples: Factories, Sewage discharge Non-Point source pollution – Non point source pollution has no specific point of origin – Examples: Oil on roadways, fertilizer/pesticide runoff
  • 22.
    Freshwater pollution – Werely on freshwater for drinking water, farming, tourism/sporting etc. – Groundwater, once contaminated is difficult/impossible to remediate Land Pollution – Farming depletes and poisons soil – Mining destroys land surfaces – Landfills leak dangerous chemicals
  • 23.
  • 24.
  • 25.
    Air pollution – Fossilfuel combustion is the major source of air pollution – Fossil fuels cause/add: Soot Carbon dioxide (global warming, acidification) Smog Acid Rain Mercury contamination And much much more! – Ozone layer is destroyed by CFC’s causing skin cancer increases – The world health organization attributes 3 million deaths per year to air pollution
  • 26.
  • 27.
    What Can WeDo? Every year in the US we throw out 30 million cell phones 18 million computers 8 million TV’s Enough tires to encircle earth 3 times! We are only 6% of earth’s population Recycling – Used items are turned into new product Re-using – Materials get used for another purpose or by other people
  • 28.
    Conservation – Natural resourcesare used sparingly Proper Disposal – Dispose of waste in a responsible manner
  • 29.
    Laws 1972-Clean Water Act 1974-SafeDrinking Water Act 1970-Clean Air Act 1976-Resource Conservation and Recovery Act 1980-Comprehensive Environmental Response, Compensation and Liability Act (superfund)