Enhancement in Web Service Architecture

Prof. Seema Patil.et.al. Int. Journal of Engineering Research and Application www.ijera.com
ISSN : 2248-9622, Vol. 6, Issue 3, ( Part -5) March 2016, pp.39-44
www.ijera.com 39 | P a g e
Enhancement in Web Service Architecture
Prof. Seema Patil 1
, Prof. Suman Tanwar2
, Prof. Manisha Tijare3
1,2,3
(Department of Computer Science, Symbiosis Institute of Technology, Pune.
ABSTRACT
Web services provide a standard means of interoperating between different software applications, running on a
variety of platforms and/or frameworks. Web services are increasingly used to integrate and build business
application on the internet. Failure of web services is not acceptable in many situations such as online banking,
so fault tolerance is a key challenge of web services. This paper elaborates the concept of web service
architecture and its enhancement. Traditional web service architecture lacks facilities to support fault tolerance.
To better cope with the fundamental issues of the traditional client-server based web service architecture, peer to
peer web service architecture have been introduced. The purpose of this paper is to elaborate the architecture,
construction methods and steps of web services and possible weaknesses in scalability and fault tolerance in
traditional client server architecture and a solution for that, peer to peer web service technology has evolved.
Keywords – Web services, fault tolerance, client-server, peer to peer
I. INTRODUCTION
Web Service is a software system designed
to support interoperable machine to Machine
interaction over a network. Web Services can
convert your application into a Web-application,
which can publish its function or message to the rest
of the world. Web Services are self-contained,
modular applications that can be described,
published, located, and invoked over a network,
generally, the Word Wide Web.
The architecture of a Web Services stack
varies from one organization to another. The number
and complexity of layers for the stack depend on the
organization. Each stack requires Web Services
interfaces to get a Web Services client to speak to an
Application Server, or Middleware component, such
as Common Object Request Broker Architecture
(CORBA), Java 2 Enterprise Edition (J2EE), or
.NET.
Although there are variety of Web Services
architectures, Web Services can be considered a
universal client/server architecture that allows
disparate systems to communicate with each other
without using proprietary client libraries. This
architecture simplifies the development process
typically associated with client/server applications
by effectively eliminating code dependencies
between client and server" and "the server interface
information is disclosed to the client via a
configuration file encoded in a standard format
(e.g.WSDL)." Doing so allows the server to publish
a single file for all target client platforms.
Related Paper
The Web Services architecture describes
principles for creating dynamic, loosely coupled
systems based on services. There are many ways to
instantiate a Web Service by choosing various
implementation techniques for the roles, operations,
and so on described by the Web Services
architecture.
A mechanism, called CoRAL, provides
high reliability and availability for Web service.
CoRAL is client-transparent and provides fault
tolerance even for requests being processed at the
time of server failure. CoRAL does not require
deterministic servers and can thus handle dynamic
content. For dynamic content, the throughput of a
server cluster is increased by distributing the
primary and backup tasks among the servers. For
static content, that is deterministic and readily
generated, the overhead is reduced by avoiding
explicit logging of replies to the backup. In the event
of a primary server failure, active client connections
fail over to a spare, where their processing continues
seamlessly. [6]
The model in [7] describes a model by
extensions of the SOAP standard and passive
replication technique to achieve fault tolerance. This
model carries out alterations on the WSDL
document inserting information related to the
primary replica and the backup replicas. It uses
interceptors in the SOAP layer for redirecting of the
requests to replicas in case of fault in the primary. of
faults and replica management. This In the
infrastructure of model, using interceptors is limited
to fault detection in the infrastructure itself, allowing
in case of faults on the primary WS Dispatcher
Engine requests can be referred to a WS Dispatcher
Engine backup.
The Construction of Web Service
Several essential activities need to happen
in any service-oriented environment:
RESEARCH ARTICLE OPEN ACCESS

1. A Web service needs to be created, and its
interfaces and invocation methods must be
defined.
2. A Web service needs to be published to one or
more intranet or Internet repositories for potential
users to locate.
3. A Web service needs to be located to be invoked
by potential users.
4. A Web service needs to be invoked to be of any
benefit.
5. A Web service may need to be unpublished when
it is no longer available or needed.
Web Services architecture then requires
three fundamental operations: publish, find, and
bind. Service providers publish services to a service
broker. Service requesters find required services
using a service broker and bind to them.
Web Service is a service-oriented
architecture which is based on the interaction among
service provider, service broker (service register
center) and service requester. This interaction
involves publishing, query and binding operation.
The architecture of Web Service is shown Figure 1.
Figure 1 the architecture of Web service
Two main compositions of Web Service are:
Service:
Web Service is an interface described by
service description and the implementation of
service description is just the service. Service is
software module and it is deployed on the platform
which is accessed through Internet and provided by
service provider. The purpose of service is to be
called by service requesters or interacted with them.
During the implementation of the service, if it calls
other Web Services, it can be considered as a service
requester.
Description of service:
Service description includes the interface of
services and the details of their implementation such
as the data type, the operation, the binding
information and the network position of Services. It
may also include the classification which is
convenient for service requesters to discover and use
as well as other metadata. Service description can be
published to service requesters or service register
centers. The construction of Web Service includes
three steps:
1. The first thing is to construct the software
modules which can provide services, which is
usually implemented through component such as
COM Component and .NET Component. These
components are the core of Web Service and the
implementation part of the services provided by
Web Service.
2. Defining the description of service interface. The
service description is regarded as the WSDL
contract which is the most important information
that can be provided by Web Service. The client
application locates the Web method of some specific
Web Service through WSDL document.
3. Web Service publishing. The process of
publishing is similar to that of publishing a web site.
In Windows operation System, Web Service is
usually deployed on IIS (Internet Information
server).
The construction of the components which
can provide services is the key step. It determines
the actual function provided by Web Service.
However, viewed from the essence, the components
in Web Service have no difference from those in
ordinary programs. Therefore, the previous methods
and technologies of component construction such as
the object oriented technology; interface-oriented
programming can be used for constructing the
components in Web Service. As Web Service is
independent on concrete programming language, so
COM component developed with VB, VC can be
considered as component of Web Service and .NET
component developed with the programming
language of .NET such as VB.NET, C# can also be
implementation of services provided by Web
Service. At the same time, tools can be used for
defining the description of service interfaces, in
other words, creating WSDL documents. For
example, WSDL document of COM component can
be generated by SOAP Toolkit, while .NET
component’s can be created by Visual Studio .NET
integrated development environment. Finally, IIS
virtual directory can be created on Web server to
deploy Web Service. At this time, client can test and
use the functions provided by Web Service.
Fault Tolerance Architecture For Web Services
In many situations such as online banking,
stock trading, reservation processing, and shopping
erroneous processing or outages are not acceptable,
so fault tolerance is a key issue of web services.
Fault tolerance makes to achieve system
dependability. Dependability is related to some QoS
aspects provided by the system, it includes the
attributes like availability and reliability. Fault
tolerance techniques are often used to increase the
reliability and availability.

In client-transparent fault tolerance, the
client sends the request and waits for the reply and
the logic is handled on the server side. The proposed
architecture is client transparent; clients
communicate with Request Handler and are unaware
of server replication. This architecture is involved
six components and is fault tolerance even for
requests being processed at the time of server
failure. It is based on N-Version, active replications
and logging request and reply messages at
application and transport levels.
The proposed fault tolerant architecture for
web services consists of six components: (1)
Request Handler, (2) Logger, (3) Reply Handler, (4)
Log Cleaner, (5) Fault Detector, (6) Replication
Manager. Figure 2 illustrates the high level
components of the architecture.
Figure 2 the fault tolerant architecture and its
components
Request Handler:
This component is responsible for receiving
requests from clients and transfers them to Logger.
Request Handler will be sure of request logging by
receiving an acknowledgment from Logger. It is
responsible for sending requests to Servers after
receiving the acknowledgment, too.
Logger:
It is consisted of four sub components:
HTTP Request Logger, HTTP Reply Logger,
TCP/IP Packets of Request Logger and TCP/IP
Packets of Reply Logger. Figure 3 illustrates the sub
components of Logger.
Reply Handler:
This component is responsible for
transferring received replies from Servers and voter
to Logger. Reply Handler will be sure of logging
replies by receiving an acknowledgment from
Logger, then sending replies to Client.
Log Cleaner:
This component removes the logged
messages of requests that were terminated and their
replies were sent to the clients.
Fault Detector:
It detects software and hardware failures
and notifies to Replication Manager appropriately.
The software failures can be detected by port
scanning. For example, by checking whether a
particular port is active (if an application server is up
and running). The hardware or network failure is
detected by using the Internet Control Message
Protocol (ICMP protocol). ICMP echo requests are
sent to each machine periodically. Fault Detector
waits for a certain time period to receive a reply. It
then resends the ICMP request and waits for a reply.
If it does not get a reply to the resent request, Fault
Detector decides that particular machine has failed.
Replication Manager:
It is responsible for maintaining replicated
servers. For example, when Fault Detector notifies a
failure to Replication Manager, it selects one of the
backup servers instead of failure server.
This architecture carries out a set of web services.
The web services run on different hardware, using
different operating systems and different web
servers. When Request Handler receives a request
from a client, it is sent to all of the server replicas.
Each replica computes the result independently and
sends it to the voter. After the execution of a voting
scheme, the reply is transferred to Reply Handler.
Active replication, NVersion techniques and logging
request and reply messages at application and
transport level cause high availability and reliability.
Operations of receiving, processing and sending
reply of request are shown below.
Step Operation:
1 Client sends a request to Request Handler.
2 Request Handler accepts the request and
transfers it to Logger.
3 TCP/IP Packets of Request Logger logs the
request at transport level.
4 HTTP Request Logger logs the request at
application level too.
5 Logger sends the acknowledgment of request to
Request Handler.
6 Request Handler forwards the request to the
servers and an acknowledgment to Client.
7 The servers process the request independently
and forward the reply to Reply Handler.
8 Reply Handler sends replies of Servers to
Logger.
9 TCP/IP Packets of Reply Logger logs the reply
at transport level.
10 HTTP Reply Logger logs the reply at
11 Logger sends the acknowledgments of replies to
Reply Handler.
12 After logging of replies, Servers send back
replies to Voter.

13 After the execution of a voting scheme, Voter
transfers the reply to Reply Handler.
14 Reply Handler sends the reply to Logger.
15 TCP/IP Packets of Reply Logger stores the
reply at transport level.
16 HTTP Reply Logger logs the reply at
17 Logger sends the acknowledgment of reply to
Reply Handler.
18 Reply Handler forwards the reply to Client with
Request Handler’s Address (Client only knows
the address of Request Handler).
19 Client sends the acknowledgment to Request
Handler.
20 Request Handler notifies Log Cleaner to
removes the logged data about the request.
21 Log Cleaner removes the logged data about the
terminated request.
If any fault or failure is detected by Fault Detector,
the following operations are done:
• Fault Detector detects a failure (software or
hardware failure) in one or more servers.
• Fault Detector notifies Replication Manager
about the failure.
• Replication Manager selects one of the backup
servers instead of failure server.
• Replication Manager notifies Request Handler,
Reply Handler and Voter about the address of
new server.
The mechanism used to recover from server
failures that occur during different phases, is as
follows:
• In the event of a server failure, the backup
server replica must be replaced by Replication
Manager and continue providing service to
Client, including handling of inprogress
requests.
• When Server (or Servers) is failed, Request
Handler does not receive acknowledgment from
Client, Request Handler retransmits the request
to Servers by using logged data of Logger. The
replaced server receives the request but other
servers ignore retransmitted request as
duplicate.
• The replaced server processes the request and
transfers the reply to Reply Handler for logging
and next forwards it to Voter.
• Other servers ask Reply Handler for sending
themselves logged replies and then forward
them to Voter.
• After the execution of a voting scheme, Voter
transfers the reply to Reply Handler and other
described operations are done.
Peer To Peer Web Service Architecture
To better cope with the fundamental issues
of the traditional client-server based web service
architecture, peer to peer web services have been
introduced and it has become a new research area in
web service arena. There is no clear cut distinction
between service providers and service consumers in
peer to peer approach. This make the peer service
model more dynamic and resilient. The fully
distributed nature of the peer to peer architecture
leads to minimize the central point of failure and
each peer can communicate and provide services
directly with each other without any centralized
control.
This architecture allows flexible interaction
among peer web services using the mobility
behavior of the channels in MoCha (MOBILE
CHANNEL)based peer to peer environment. The
entire peer to peer architecture is built on top of
MoCha middleware and peers communicate with
each other through mobile channels in case of
joining the network, service discovery and service
invocation. Another desirable property that is to be
achieved with this study is to introduce fault
tolerance in order to deal with peer failure in web
service invocation time.
Here the main focus is to introduce a
distributed approach for web service publishing,
discovery and use mobile channels to build up a
flexible web service interaction mechanism.
Figure 3 depicts the layered view of the peer to peer
web service architecture.
Figure 3 Layered view of MoCha based peer to
peer web service architecture
1) Service Publish and Discovery:
Each service provider peer in the network
maintains their own registry which contains their
own services as well as services provided by their
neighbors (any connected peer to a particular peer at
a moment). The registry is a directory of the peers
local file system. Each service is associated with a
service detail file (Serialized Service Detail) which
is stored in the service directory of the peers local
file system. This file contains service specific
information related to a service in XML format. The
Service Detail Serializer creates this file when a

service is published. Each service provider peer
maintains two data structures. One data structure
contains the services provided by that peer. The
other data structure is used to maintain the services
provided by neighbor peers. A peer can request the
service lists from other connected peer and store
them in that data structure. This approach is efficient
the service discovery process.
Any potential service consumer peer may
first connect to a service provider peer and then it
can request services from it. When a service
provider peer gets a service lookup request, it first
queries the data structure which contains the services
provided by that peer. If the requested service is
found within that peer the public interface (WSDL
file) related to that service is sent to the service
requester. If the requested service is unavailable
within that peer, it queries the data structure which
contains the services provided by the neighbor peers.
If the service is found at any neighbor peer, the
service lookup request is directed to that particular
peer as it can respond to that request. This kind of
behavior can be achieved due to the mobility nature
of the connections among peers.
2) Service Description:
This specifies the description of a web
service in XML format. As usual WSDL is used to
describe the operations, data types and parameters
related to a web service. The Serialized Service
Detail for a given web service is used to persists the
details such as service name, service class name,
WSDL document name, WSDL document location
of the peers local file system and access details of
the service in XML notations. The Serialize Service
Details will be also used in service deployment as
well as in service invocation.
3) Messaging:
Here MoCha has been used as the transport
medium for web service related interactions. The
current version of MoCha supports any serialized
object to be passed through the channels. Therefore
Channel Message has been introduced as it provides
serialized messaging format that can be transmitted
through MoCha channels. SOAP is the most widely
using messaging standard for sending web service
invocation requests and responses. Therefore SOAP
has been combined with Channels Messages in case
of web service invocations.
4) Transport:
The peer to peer web service architecture is
built on top of this MoCha based network
infrastructure. So MoCha has to be used as the
transport medium of the web service architecture, a
depicted Figure 5.2. The MoCha Transport Sender is
responsible in sending service invocation messages
to the service provider in case of web service
invocation. The Sink End Listener always listens to
the sink channel end in order to read messages from
its channel. The MoCha Transport defines the
mobile channel based transport for web service
invocations.
Web Service Replication For Fault Tolerance
In a peer to peer environment peers may not
be up and running all the time. Unavailability of a
particular peer may lead to unavailability of whole
set of services provided by that peer. In order to deal
with peer failures and unavailability of peers a web
service can be replicated and deployed among
several peers. The fault tolerance mechanism
proposed here increases the availability of a service
in service invocation time in the presence of peer
failures and unavailability of peers.
When a consumer invokes a replicated
service, first it invokes the service at the master
service provider as depicted in Figure 4 If the master
service provider has crashed or unavailable, then the
consumer may iteratively invoke the service at
replicated peers until it finds a live peer.
Figure 4 Web service replication and invocation
II. CONCLUSION
The increasing adoption of the web services
needs efficient, scalable alternatives to the
traditional client-server model for service discovery
and invocation. As a solution for that client-
transparent fault tolerance architecture for web
services have evolved that correctly handles client
requests, including those in progress at the time of
server failure. It can recover requests being
processed at the time of server failure by logging of
request and reply messages Because of redundancy,
it has overhead but provides high availability and
reliability for web services. Peer to Peer web service
architecture enables deploying, publishing,
discovering and invoking web services in MoCha
based peer to peer network infrastructure.
REFERENCES
[1]. Xuelei Wu, Jia Chen, Bilan Rong. “Web
Service Architecture and Application
Research”, E-Business and Information
System Security, International Conference,
Page number 1 - 5, 23-24 May 2009.

[2]. Aghaei S., Khayyambashi M.R.,
Nematbakhsh M.A. “A Fault Tolerant
Architecture for Web Services”,
Innovations in Information Technology
(IIT), 2011 International Conference, Page
number 53 - 56, 25-27 April 2011.
[3]. Sanjeewa P.A.A., Ranasinghe D. N. “A
peer to peer web service architecture based
on MoCha”, Information and Automation
for Sustainability (ICIAFs), 0 5th
International Conference, Page number
207- 212, 17-19 Dec. 2010.
[4]. Zimmermann,M.; “A Web Service
Architecture for VoIP Services”, Internet
and Web Applications and Services
(ICIW), Fifth International Conference,
Page number 445-450, 9-15 May 2010.
[5]. Ajlan Al-Ajlan, Hussein Zedan. “The
Extension of Web Services Architecture to
Meet the Technical Requirements of
Virtual Learning Environments (Moodle)”,
Page number 27- 32, 2008.
[6]. Aghdaie N., Tamir Y., “CoRAL: A
transparent fault-tolerant web service”, The
Journal of Systems and Software, 2008.
[7]. Wei Chuyuan, “The Exploration of Web
Services Architecture and Implementation
Mechanism”, Journal, Aeronautical
Computer Technique, Page number 103-
104, 2003.

Enhancement in Web Service Architecture

More Related Content

What's hot (19)

Similar to Enhancement in Web Service Architecture (20)

Recently uploaded (20)

Enhancement in Web Service Architecture