High k dielectric
Download as PPT, PDF•3 likes•2,912 views
The document discusses the transition to high-k dielectrics in CMOS technology, addressing the need for materials with higher dielectric constants due to the limitations of traditional SiO2. It outlines the compatibility issues, performance challenges, and recent advancements in metal gate/high-k dielectric stacks that achieve excellent transistor performance with minimal leakage. Additionally, it highlights the application of high-k dielectrics in DRAM and ferroelectric memories, showcasing their benefits in high-speed, low-power electronic devices.
![HIGH K DIELECTRIC
• Introducing higher dielectric constant (k > 10) insulators [mainly
transition metal (TM) oxides] is therefore indispensable for the 70
nm technology node and beyond
• TM silicates such as HfSiOx have been preferred because they have
better thermal stability compared to their oxides. The dielectric
constant of TM silicates is less than TM oxides but higher than silicon
oxide.](https://image.slidesharecdn.com/highk-dielectric-150406025506-conversion-gate01/85/High-k-dielectric-4-320.jpg)
![BIBLIOGRAPHY
•
References
• [1] S. Thompson et al., IEDM Technical Digest, p.61, 2002.
• [2] R. Chau et al., IEDM Technical Digest, p.45, 2000.
• [3] R. Chau et al., Physica E, Low-dimensional Systems and Nanostructures,
Vol. 19, Issues 1-2, p.1, July 2003.
• [4] S. Inumiya et al., Symp. of VLSI Technology, p.17, 2003.
• [5] G. Lucovsky et al., IEDM Technical Digest, p.617, 2002.
• [6] C. Hobbs et al., Symp. of VLSI Technology, p.9, 2003
• [7] M. Fischetti et al., J. Appl. Phys., Vol. 90, p.4587, 2001.
• [8] S. Datta et al., IEDM Technical Digest, p.653, 2003.
• [9] Q. Lu et al., Symp. of VLSI Technology, p.72, 2000.
• [10] R. Chau et al., Extended Abstracts of International Workshop on Gate
Insulator (IWGI), Tokyo, Japan, p.124, Nov. 2003.](https://image.slidesharecdn.com/highk-dielectric-150406025506-conversion-gate01/85/High-k-dielectric-16-320.jpg)
High k dielectric
- 2. INDEX • Introduction • Explanation • Working • Graphical data • Application • Conclusion • Bibliography
- 3. INTRODUCTION • For more than 15 years the physical thickness of SiO2 has been aggressively scaled for low-power, high- performance CMOS applications. • Continual gate oxide scaling, however, will require the use of dielectric materials with higher dielectric constant (K) since • i) the gate oxide leakage is increasing with decreasing SiO2 thickness • ii) SiO2 is running out of atoms for further scaling. • So far the most common high-K dielectric materials investigated by both academia and industry are Hf-based and Zr-based
- 4. HIGH K DIELECTRIC • Introducing higher dielectric constant (k > 10) insulators [mainly transition metal (TM) oxides] is therefore indispensable for the 70 nm technology node and beyond • TM silicates such as HfSiOx have been preferred because they have better thermal stability compared to their oxides. The dielectric constant of TM silicates is less than TM oxides but higher than silicon oxide.
- 5. WHAT ARE THE CRITERIA THAT SHOULD BE MET? Engineering n-type and p-type metal electrodes with the correct work functions on high-K gate dielectrics for high-performance CMOS applications. The resulting metal gate/high-K dielectric stacks should have • i) equivalent oxide thickness (EOT) of 1.0nm with negligible gate oxide leakage, •ii) desirable transistor threshold voltages for n- and p-channel MOSFETs, • iii) transistor channel mobilities close to those of SiO2. The CMOS transistors fabricated with these advanced metal gate/high-K dielectric stacks achieve the expected high drive current performance
- 6. CHALLENGE IN REPLACING SIO2 WITH HIGH K DIELECTRIC • There are two typical problems in replacing polySi/SiO2 with the polySi/high-K dielectric stack for high- performance CMOS applications. • First, high-K dielectrics and polySi are incompatible due to the Fermi level pinning at the polySi/high-K interface , which causes high threshold voltages in MOSFET transistors. • Second, polySi/high-K transistors exhibit severely degraded channel mobility due to the coupling of low energy surface optical (SO) phonon modes arising from the polarization of the high-K dielectric to the inversion channel charge carriers
- 7. FERMI LEVEL PINNING Fermi level pinning effect from metal-induced gap states: The bands in the silicon already start out bent due to surface states. They are bent again just before contact (to match work functions). Upon contact however, the band bending changes completely
- 8. METAL GATE HIGH-K DIELECTRIC STACK • Metal gate electrodes may be more effective than polySi in screening the high-K SO phonons from coupling to the channel under inversion conditions, resulting in improved channel mobility • the use of high-K/metal-gate require a n-type metal and a p-type metal with the right work functions on the high-K dielectric for high- performance CMOS logic applications on bulk Si • So far, all the metal gate electrodes reported in literature have work functions that are mid-gap or close to mid-gap on high-K dielectrics • The resulting CMOS transistors have high threshold voltages and hence poor drive performance
- 9. NEW METAL GATE/HIGH-K DIELECTRIC STACKS TO ACHIEVE RECORD-SETTING TRANSISTOR PERFORMANCE • We have successfully engineered n-type and p-type metal electrodes that have the correct work functions on the high-K for high- performance CMOS. • The resulting metal gate/high-K dielectric stacks have equivalent oxide thickness (EOT) of 1.0nm with negligible gate oxide leakage, • channel mobilities that are close to SiO2
- 10. CONTINUED • 80nm physical-gate- length CMOS transistors with the new metal gate/high- K dielectric stacks have been fabricated to produce the expected high performance (due to reduction in inversion thickness Tox(inv) and increase in inversion charge) • At Vd = 1.3V, the NMOS transistor achieves record-setting Ion = 1.66mA/um with Ioff = 37nA/um • while the PMOS transistor achieves record-setting Ion = 0.69mA/um with Ioff = 25nA/um
- 13. HIGH K-DIELECTRIC FOR DRAM CAPACITOR • To achieve high capacitance, the equivalent oxide thickness must be 1nm or lower. Unlike gate dielectric, the DRAM capacitor is very sensitive to leakage. The data retention time suffers greatly if the capacitor leakage exceeds ~ 1 fA/cell. • The most commonly selected high K dielectrics are Ta2O5, Al2O3, or BST (Ba-Sr-Titanate) in order to ensure low leakage. These high K dielectrics also contain fixed charges that manifest into displacement current that degrades the access speed.
- 14. HIGH K FERROELECTRICS FOR FERAM CAPACITOR • FeRAM not only is non-volatile, but also consumes little power during switching because it is a voltage device and not a current device. The data is stored in the form of dipole polarization and thus requires no current to charge and discharge the capacitor. It is also very fast (< 100 ns access time) compared to other non-volatile memories for the same reason. • Consequently, it becomes an ideal memory for embedded and SoC (System-on-Chip) applications – the most important being hand-held devices such as cellular phone, and contactless smart card which requires both high speed and low power. • Most ferroelectrics have very high permittivity in the order of 500 – 1000. These dielectrics contain permanent dipoles that can be oriented by applying an electric field, and thus are suitable for non- volatile data storage
- 15. CONCLUSION • We have successfully engineered advanced metal gate/high-K dielectric stacks with the correct work functions and channel mobilities close to SiO2. The resulting CMOS transistors with the new gate stacks achieve record-setting drive current performance, as expected, with negligible gate oxide leakage.
- 16. BIBLIOGRAPHY • References • [1] S. Thompson et al., IEDM Technical Digest, p.61, 2002. • [2] R. Chau et al., IEDM Technical Digest, p.45, 2000. • [3] R. Chau et al., Physica E, Low-dimensional Systems and Nanostructures, Vol. 19, Issues 1-2, p.1, July 2003. • [4] S. Inumiya et al., Symp. of VLSI Technology, p.17, 2003. • [5] G. Lucovsky et al., IEDM Technical Digest, p.617, 2002. • [6] C. Hobbs et al., Symp. of VLSI Technology, p.9, 2003 • [7] M. Fischetti et al., J. Appl. Phys., Vol. 90, p.4587, 2001. • [8] S. Datta et al., IEDM Technical Digest, p.653, 2003. • [9] Q. Lu et al., Symp. of VLSI Technology, p.72, 2000. • [10] R. Chau et al., Extended Abstracts of International Workshop on Gate Insulator (IWGI), Tokyo, Japan, p.124, Nov. 2003.