How to Configure ip address for router interfaces
Download as PPTX, PDF2 likes5,869 views
The document provides instructions for configuring IP addresses on interfaces of two Cisco routers, R1 and R2. It describes configuring IP address 192.168.1.1 on R1's fa0/0 interface and 192.168.2.1 on R2's fa0/0 interface. It also describes configuring IP address 172.16.1.1 on R1's serial interface S0/0 as the DCE device and 172.16.1.2 on R2's serial interface S0/1 as the DTE device. The configuration includes setting the clock rate on R1's serial interface.
1 of 5
Downloaded 110 times
More Related Content
What's hot (20)
Similar to How to Configure ip address for router interfaces (20)
Ad
More from tcpipguru (20)
Ad
Recently uploaded (20)
How to Configure ip address for router interfaces
- 1. Ip address configuration for Cisco router (2611xm) interfaces (fast ethernet and serial) WWW.TCPIPGURU.COM
- 3. Description Configure ip address 192.168.1.1 for R1 router’s fa0/0 interface and 192.168.2.1 for R2 router’s fa0/0 interface. Configure ip address 172.16.1.1 for R1 routers S0/0 interface and provide clock rate (DCE)and 172.16.1.2 for R2 routers S0/1 interface.
- 4. R1>enable R1#config t R1(config)#int fa0/0 R1(config-if)#ip address 192.168.1.1 255.255.255.0 R1(config-if)#bandwidth 1000 (optional) R1(config-if)#no shutdown R1(config-if)#exit R2>enable R2#config t R2(config)#int fa0/0 R2(config-if)#ip address 192.168.2.1 255.255.255.0 R2(config-if)#bandwidth 1000 (optional) R2(config-if)#no shutdown R2(config-if)#exit
- 5. AND (SERIAL DCE INTERFACE) R1(config)#int s0/0 R1(config-if)#ip address 172.16.1.1 255.255.0.0 R1(config-if)#no shutdown R1(config-if)#clock rate 64000 R1(config-if)#exit (SERIAL DTE INTERFACE) R2(config)#int s0/1 R2(config-if)#ip address 172.16.1.2 255.255.0.0 R2(config-if)#no shutdown R2(config-if)#exit