Insurance management system project report.pdf

AN
PROJECT REPORT
ON
INSURANCE MANAGEMENT SYSTEM PROJECT
BY
KAMAL ACHARYA
(Tribhuvan University)
Date: 2021/08/10

1. INTRODUCTION
1.1 Overview of the Project
The project entitled as “Insurance Management System” is developed in a manner
to help all the Insurance Agency Members. It is developed using Visual Basic 6.0 as Front-
End and MS Access as the Back-End tool.
The system is designed in such a way that it accepts and stores the input data, process
and produce output under the direction of a detailed step by step stored programmed
instruction. This system includes Client Dairy, Client Details, Add new Client, Policy
Details and Payment Details information’s and gives details based on the policy Number
of the client. This system is necessary for Storing Information, assessing Workload and
hence their efficiency. The System provides the adequate information to the concern for its
smooth run.
1.2 About Existing System
MANUAL SYSTEM:
This system involves manual labours, which may lead to problems. It is
very tedious to handle large volume of data and requires more time to handle the
information, which results in slow processing.
Thus the computerization will make it very easy and accurate at all the
processing stages. Report preparation requires more time so by computerizing, it will
be very easy for the management. So the existing system is to be changed and put for
computerization.
2.1.1 DRAWBACKS OF THE EXISTING SYSTEM
1. Tedious to handle large volume of data.
2. Time consumption.
3. Maintaining the manual registers is cumbersome.
4. Decision making is very slow.

2. SYSTEM ANALYSIS
2.1 Proposed System
The Proposed System has been designed using Visual Basic as front-end
and MS-Access as back-end. The proposed system is a computerized on with GUI
interface. It takes care of the process under an easy environment to work with.
Proposed System has the following facilities:
The new system is under-friendly.
➢ The systems provide all possible options to new entry, editing, updating and
searching the Policy and Client.
➢ The system have the search options in many ways, it is very user friendly.
➢ The system is highly portable.
➢ The system provides very good database Management System.

3. SYSTEM REQUIREMENT SPECIFICATION
3.1 Hardware Specification
Processor : Pentium IV 2.4GHz
RAM : 512 MB DDR 2
Hard Disk : 80 GB
Floppy disk : 1.44MB
Key Board : United states 101
Monitor : 15’’Color Monitor
2.3.2 Software Specification
Front-End : Visual Basic 6.0
Back-End : MS Access
Operation System : Windows XP

Microsoft Visual Basic 6.0
Microsoft Visual Basic 6.0 is the newest version of the popular
programming language . Version 6.0 of V.B specifically designed to the utilize the
internet. You can develop robust stand alone application, games ,and utilities in less
time then it take in other language .You can also use ActiveX technology to create
internet enabled applications that are limited only by your imagination. This software
works under Windows 95, 98, NT platforms and XP. This is one of the improved language
efficiency from Basic language. Visual basic includes a variety of open active control for
user interface to design application forms.
The user interface is the part of the program that responds to key
press and mouse clicks. The action is referred to as events of the form and a control in the
form. Controls are placed to communicate with backend database and validation checks.
Visual basic provides a vast properties and methods each control which helps utilize all the
function for record manipulations. Data manager in visual basic easy way to create
database and build interface using data control or data access object the database tables.
Each database objects can be accessed through data access object of any type as such as
record set.
This record set contain record collection, can be efficiently,
manipulated using different record set methods such as add new and edit. Report generation
is prepared, using data report, which can be used to bring different types of report such as
tabular report, group report and query –based report.

IMPOTANT FEATURES IN VISUAL BASIC 6.0:
Active X control
➢ There are several built in active x control in VB6.0 they are used to represent the
data in a simple format.
➢ Tree view control - is used to represent the data in a hierarchical tree structure
format.
➢ List view control – lists the data in a vertical table format.
➢ Animation control and multimedia control are mainly used in graphical oriented
application developed using VB6.0.
MS ACCESS
MS Access is a powerful database management system and user creates application
that requires little or no programming. It supports GUI features entire programming
language, VBA (Visual Basic 6 for application).
Access is easy enough to use that, in short time, beginners can manage their own
data in MS Access; the database means a collection of tables that holds data. It collect and
stores all the other related object such as queries, forms and report that are used to
implement the database management function effectively. The MS access database can acts
as a backend database for VB 6.0.
A user can move inside a table very easily using the navigating tools supported by
the Access database. A table can be accessed in number of ways like a snapshot, dynaset,
table etc.

4. SYSTEM DESIGN
Design is the first stepping stone for the development of any
system. The process of system is very elaborate and should be carried with almost care as
the actual system get its shape at this phase. This consists of four main stages.
They are
1. Input design
2. Output design
3. Screen design
4. Code design
5. Database design
4.1. INPUT DESIGN:
The input design is the link between the information system and
the user. It comprises the director specification and procedures for data preparation and
those steps that are necessary to put transaction data into a usable form for processing
data entry. The activity if putting data in to the computer for processing can be achieved
by inputs, focuses on controlling the amount of inputs required, controlling errors,
avoiding delay, avoiding extra steps and keeping the process simple.
System analyst decides the following input design details:
1. Why data to input?
2. What medium is used?
3. How the data should be arranged or coded?
4. The dialog to guide users in providing input
5. Data item and transaction needing validation to detect errors
6. Methods for performing input validation and steps to follow when error occur.
.

4.2. OUTPUT DESIGN:
Computer output is the most important and direct source of
information to the user. Output design is a process that involves designing necessary output
that have to be given to various users according to their requirements. Efficient, intelligible
output design will improve the system relationship with the user and help indecision
making. Since the reports are directly required by the management for taking decision and
to draw conclusion, they must be designed with almost care to the user. The options for the
output and report are given in the system menu. When designing output, system analyst
must accomplish the following:
1. Determine the information to present.
2. Determine whether to display, print, or “speak” the information and select the
output to intended receipts.
3. Arrange the present of information acceptable format.
4. Determine how to distribute the output to intended receipts.
4.3. SCREEN DESIGN:
Screen design begins with recognition that the screen is composed of
different areas. Layout tools assist the analyst in specifying the content of the signal and
multiple design formats. All screen have been provided with menus, push buttons
facilities, a icons and controls buttons such as Add/Delete/Update/Find/Clear/Exit etc.
The main screen consists of main menu from which we can move to another forms or
screen. In designing output screens we need area for:
1. Heading and titles.
2. The content of display.
3. Message and instructions.
4. Some times explanations for information in the report.

4.4. CODE DESIGN:
A code is a group of characters designed to identify the data items
of the same type uniquely. When hospital volume of data are handled , it is essential that
each one identified, selected and retrieved quickly and easily and there arises the need for
the codes. Codes should be designed carefully and should be meaningful. It should abide
the general rules of the code designing and should be understood by the user.
4.5. DATABASE DESIGN:
Database files are the key source of the information into the system. The
final design must satisfy user needs in terms of completeness, integrity, performance and
other factors. The main objective of the database design is to store the captured data
efficiently and facilitate its timely retrieval.

4.1 DESIGN NOTATIONS
4.1.1 System Flow Diagram
Exit
Payment Details
Payment
Introduction Client
Login Process
Client Dairy
Policy
Insurance Agency Management System
Client Details
Add Client
Policy Details
About Company
and Project

4.1.2 Data Flow Diagram
Level: 0 DFD
Login
Login
Checkin
g
In valid user
Valid user
User

Level: 1 DFD
Level: 2 DFD
Introductio
n
Client Dairy
Payment Details
With Add Amount
Client
Details
Policy
Details
Add Client
Exit

A Data Flow Diagram (DFD) is a diagram that describes the flow of data and the
processes that change or transform data throughout a system. It is a structured analysis and
design tool that can be used for flowcharting in place of, or in association with, information
oriented and process oriented system flowcharts. When analysts prepare the DFD, they
specify the user needs at a level of detail that virtually determines the information flow into
and out of the system and the required data resources. This network is constructed by using
a set of symbols that do not imply a physical implementation. The DFD reviews the current
physical system, prepares input and output specification, specifies the implementation plan
etc., Four basic symbols are used to construct data flow diagrams. They are symbols that
represent data source, data flows, and data transformations and data storage. The points at
which data are transformed are represented by enclosed figures, usually circles, which are
called nodes.
A "Square" defines a source (originator) or destination of a system data.
An "Arrow" identifies data flow. It is a pipeline through which information flows.
A "Circle" represents a process that transforms incoming data flow(s) into outgoing data
flow(s).
An "Open Rectangle" is a data store.

Steps to Construct Data Flow Diagrams
Four steps are commonly used to construct a DFD
➢ Process should be named and numbered for easy reference. Each name should be
representative of the process.
➢ The direction of flow is from top to bottom and from left to right.
➢ When a process is exploded in to lower level details they are numbered.
➢ The names of data stores, sources and destinations are written in capital letters.

4.1.2 Table Design
Table Name: ClientDet
Primary Key: Sno
Description: Client Details
S.NO FIELD NAME DATATYPE FIELDWIDTH DESCRIPTION
1 Sno Number 8 Serial number
2 cname Text 10 Client Name
3 cProductName Text 15 Product Name
4 PolicyNo Number 15 Client Policy Number
5 PAdd Text 16 Client Permanent Address
6 Gen Text 6 Gender
7 Occup Text 15 Client Occupation
8 Buaddr Text 15 Client Business Address
9 Qual Text 15 Client Qualification
10 Nation Text 10 Nation
11 Religion Text 10 Religion
12 MStatus Text 4 Client Marital Status
13 NomineeName Text 15 Client Nominee Name
14 DOC Date 8 Date of Commencement
15 Taddr Text 15 Client Temporary Address
16 Phno Number 15 Client Phone Number
17 Age Number 2 Client Age
Table Name: AddClient
Primary Key: Sno
Description: Add Clients Details
1 Sno int 8 Serial number
2 cname varchar 10 Client Name
3 cProductName varchar 15 Product Name
4 PolicyNo int 15 Client Policy Number
5 PAdd varchar 16 Client Permanent Address
6 Gen varchar 6 Gender
7 Occup varchar 15 Client Occupation
8 Buaddr varchar 15 Client Business Address
9 Qual varchar 15 Client Qualification
10 Nation varchar 10 Nation

11 Religion varchar 10 Religion
12 MStatus varchar 4 Client Marital Status
13 NomineeName varchar 15 Client Nominee Name
14 DOC Date 8 Date of Commencement
15 Taddr varchar 15 Client Temporary Address
16 Phno int 15 Client Phone Number
17 Age int 2 Client Age
Table Name: PayDet
Primary Key: Sno
Description: Payment Details
1 Sno int 8 Serial number
2 cPolicyNo int 15 Client Policy Number
3 ModePay varchar 10 Mode of Payment
4 PolStatus varchar 15 Policy Status
5 DLastPay Date 8 Date of Last Payment
6 AmtLastPay int 16 Amount of Last Payment
Table Name: PolicyDet
Primary Key: Sno
Description: Policy Details
1 Sno Number 8 Serial number
2 cPolicyNo Number 15 Client Policy Number
3 Poltype Text 16 Client Policy Type
4 SumAssue Number 16 Sum Assured
5 DOCPol Date 8 Date of Commencement Policy
6 Term Number 2 Term
7 MaturityD Date 8 Maturity Date
8 PPaidTillD Date 8 Premium Paid Till Date
9 PreAmtDue Number 10 Premium Amount Due
10 ServiceTax Number 6 Service Tax
11 Educess Number 6 Education Cess
12 TotAmtDue Number 16 Total Amount Due
13 NxtPreDueD Date 8 Next Premium Amount Due

14 MOPay Text 10 Mode of Payment
15 PolStatus Text 10 Policy Status

5. SYSTEM TESTING
5.1 System Testing
Software testing is the process of executing the program with the sole
interest of finding an error. A good test is the one that a high probability of finding the yet
undiscovered error. This test focuses on each module separately assuring that it functions
properly as a unit.
The enables users to detect errors and correct it without affecting any other
modules. Whenever the program was not executing the required function, it must be
corrected to get the required result. Thus all the modules, master, transaction, queries,
reports, are tested separately with test data. Errors isolated and corrected. To check error-
handling paths, uncorrected data is entered and tested.
5.1.1 Test Methodologies
Unit Testing
In this, each module of the program is tested individually to find out
whether retriever, manipulate and store any loss of data.
For example, machine code, company code and power generation hours
won’t negative or zero values, this condition was tested successfully by entering zero and
negative values. Similarly, if you want to input correct date you enter some other date
system won’t accept.
Validation
Data Validation is done to see whether the corresponding entries in
different tables done correctly. Proper validation checks are done in case of insertion and
updating of tables, in order, to see that no duplication of data has occurred. Validation
succeeds when the software functions in a manner as expected by the customer.

Interaction Testing
In this testing, all modules of the application are combined together and
running is made. This ensures the co-ordination between different modules of the program.
This test starts from main menu to all the modules. Form term main menu we can to the
entire application module and to the main module.
Output Testing
After performing the validation testing, the next step is output testing of the
proposed system, since no system could be useful if it does not produce the required output
in the specified format. The outputs generated or displayed by the system under
consideration are tested by asking the users about the format required by them. Hence the
output format is considered in 2 ways – one is on screen and another in printed format.

6. IMPLEMENTATION
Implementation is the stage of the project where the theoretical design is turned
into a working system. At this stage the main work load, the greatest upheaval and the
major impact on the existing system shifts to the user department. If the implementation
is not carefully planned a controlled it can cause chaos and confusion.
Implementation includes all those activities that take place to convert from the old
system to the new one. The new system may be totally new, replacing an existing manual
or automated system or it may be a major modification to an existing system. Proper
implementation is essential to provide a reliable system to meet the organization
requirements. Successful implementation may not guarantee improvement in the
organization using the new system, but improper installation will prevent it.
The process of putting the developed system in actual use is called system
implementation. This includes all those activities that take place to convert from the old
system to the new system. The system can be implemented only after thorough testing is
done and if it is found to be working according to the specifications. The system personnel
checks the feasibility of the system.
The most crucial stage is achieving a new successful system and giving confidence
on the new system for the user that it will work efficiently and effectively. It involves
careful planning, investigation of the current system and its constraints on implementation,
design of methods to achieve the changeover. The more complex the system being
implemented, the more involved will be the system analysis an the design effort required
just for implementation. The system implementation has three main aspects. They are
education and training, system testing and changeover.
The implementation stage involves following tasks.
➢ Careful planning.
➢ Investigation of system and constraints.

➢ Design of methods to achieve the changeover.
➢ Training of the staff in the changeover phase.
➢ Evaluation of the changeover method.
The method of implementation and the time scale to be adopted are found out
initially. Next the system is tested properly and the same time users are trained in the new
procedures.
Implementation Procedures
Implementation of software refers to the final installation of the package in its real
environment, to the satisfaction of the intended users and the operation of the system. In
many organizations some one who will not be operating it, will commission the software
development project. The people who are not sure that the software is meant to make their
job easier. In the initial stage, they doubt about the software but we have to ensure that the
resistance does not build up as one has to make sure that
➢ The active user must be aware of the benefits of using the system
➢ Their confidence in the software is built up
➢ Proper guidance be imparted to the user so that he is comfortable in using the
application.
Before going ahead and viewing the system, the user must know that for
viewing the result, the server program should be running in the server. If the server object
is not up running on the server, the actual processes wont take place.

6.1 SYSTEM MAINTANANCE
The maintenance phase of the software cycle is the time in which a Software
product performs useful work.
After a system is successfully implemented, it should be maintained in a proper
manner. System maintenance is an important aspect in the software development life cycle.
The need for system maintenance is for it to make adaptable to the changes in the system
environment. There may be social, technical and other environmental changes, which
affects a system, which is being implemented. Software product enhancements may
involve providing new functional capabilities, improving user displays and mode of
interaction, upgrading the performance characteristics of the system. So only through
proper system maintenance procedures, the system can be adapted to cope up with these
changes.
Software maintenance is of course, far more than “finding mistakes”. We may
define maintenance by describing four activities that are undertaken to after a program is
released for use.
The first maintenance activity occurs because it is unreasonable to assume that
software testing will uncover all latent errors in a large software system. During the use
of any large program, errors will occur and be reported to the developer.
The process that includes the diagnosis and correction of one or more errors is
called corrective maintenance.
The second activity that contributes to a definition of maintenance occurs because
of the rapid change that is encountered in every aspect of computing. Therefore, adaptive
maintenance- an activity that modifies software to properly interfere with a changing
environment is both necessary and commonplace.

The third activity that may be applied to a definition of maintenance occurs when
a software package is successful. As the software is used, recommendations for new
capabilities, modifications to existing functions, and general enhancements are received
from users. To satisfy requests in this category, perfective maintenance is performed. This
activity accounts for the majority of all effort expended on software maintenance.
The fourth maintenance activity occurs when software is changed to improve future
maintainability or reliability, or to provide a better basis for future enhancements. Often
called preventive maintenance, this activity is characterized by reverse engineering and re-
engineering techniques.

7. CONCLUSION AND FUTURE ENHANCEMENT
The “INSURANCE MANAGEMENT SYSTEM” has been developed to
fill all the requirements of the Insurance Agency. The system is tested with the sample data
and found to be executing at its maximum performance.
The system is fully user interactive with command buttons for selecting
various options to navigate other table processing and manipulate the effective handling of
Client Details and Payment Details. Report from the system provides complete details
about the Policy to the Insurance Agency, hence the daily report taken so that any future
change in the current system will improve the efficiency of the generating process.
By using this software, they can take quick decisions and preventive
actions based on the details given by the system. Due to the software, I hope quality will
be improved, problems will be solved.
It is user friendly system provided with options, which can be utilized by
the desired operations. The new system overcomes the problems encountered with the old
system.

9. REFERENCE AND BIBLIOGRAPHY
Acharya, Kamal. "STUDENT INFORMATION MANAGEMENT
SYSTEM." Authorea Preprints (2023).
Acharya, Kamal. "Library Management System." Available at SSRN4807104 (2019).
ACHARYA, KAMAL, et al. "LIBRARY MANAGEMENT SYSTEM." (2019).
Acharya, Kamal. "Online bus reservation system project report." Authorea
Preprints (2024).
Acharya, Kamal. "Online bus reservation system project report." (2024).
Acharya, Kamal. “Online Bus Reservation System.” SSRN ElectroNIC ASIA
Journal (2024): n. pag.
Acharya, Kamal. “Student Information Management System Project.” SSRN
ElectroNIC ASIA Journal (2024): n. pag.
Acharya, Kamal. “ATTENDANCE MANAGEMENT SYSTEM.” International
Research Journal of Modernization in Engineering Technology and
Science (2023): n. pag.
Acharya, Kamal. “College Information Management System.” SSRN ElectroNIC
ASIA Journal (2024): n. pag.
Acharya, Kamal, Attendance Management System Project (April 28, 2024).
Available at
SSRN: https://ssrn.com/abstract=4810251 or http://dx.doi.org/10.2139/ssrn.4810251
Acharya, Kamal, Online Food Order System (May 2, 2024). Available at
Acharya, Kamal, University management system project. (May 1, 2024). Availableat
Acharya, Kamal, Online banking management system. (May 1, 2024). Available at
Acharya, Kamal, Online Job Portal Management System (May 5, 2024). Available at
Acharya, Kamal, Employee leave management system. (May 7, 2024). Available
at SSRN: https://ssrn.com/abstract=4819626 or http://dx.doi.org/10.2139/ssrn.4819626
Acharya, Kamal, Online electricity billing project report. (May 7, 2024). Available at

Insurance management system project report.pdf

More Related Content

What's hot

Similar to Insurance management system project report.pdf

More from Kamal Acharya

Recently uploaded

In this document

Insurance management system project report.pdf