Introduction to Non destructive testing.pptx

Introduction to Non destructive testing.pptx

• 1.
  NDT NON DESTRUCTIVE TESTING
• 2.
  • Non-destructive testing(NDT) is the process of inspecting, testing, or evaluating materials, components or assemblies for discontinuities, or differences in characteristics without destroying the serviceability of the part or system. In other words, when the inspection or test is completed the part can still be used. • In contrast to NDT, other tests are destructive in nature and are therefore done on a limited number of samples ("lot sampling"), rather than on the materials, components or assemblies actually being put into service. • These destructive tests are often used to determine the physical properties of materials such as impact resistance, ductility, yield and ultimate tensile strength, fracture toughness and fatigue strength, but discontinuities and differences in material characteristics are more effectively found by NDT. • Today modern nondestructive tests are used in manufacturing, fabrication, and in- service inspections to ensure product integrity and reliability, to control manufacturing processes, lower production costs, and to maintain a uniform quality level and in-service NDT inspections are used to ensure that the products in use continue to have the integrity necessary to ensure their usefulness and the safety of the public. • NDT also known as non-destructive examination (NDE), non-destructive inspection (NDI) and non-destructive evaluation (NDE).
• 3.
  Important NDT tests AcousticEmission Testing (AE) Electromagnetic Testing (ET)- eddy current testing, alternating current field measurement (ACFM) and remote field testing (RFT). Ground Penetrating Radar (GPR) Laser Testing Methods (LM) Leak Testing (LT) Magnetic Flux Leakage (MFL) Microwave Testing Liquid Penetrant Testing (PT) Magnetic Particle Testing (MT) Neutron Radiographic Testing (NR) Radiographic Testing (RT) Thermal/Infrared Testing (IRT)
• 4.
  • Ultrasonic Testing(UT)-Pulse Echo (PE), Through Transmission (TT) and Time of Flight Diffraction (ToFD). • Immersion Testing • Air Coupled Testing • Electromagnetic Acoustic Transducer (EMAT) Testing • Guided Wave Testing (GW) • Automated Inspection • Phased Array Ultrasonic Testing (PAUT) • Full Matrix Capture (FMC) • Virtual Source Aperture (VSA) • Vibration Analysis (VA) • Visual Testing (VT)